We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
16/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
16/05/2024
Full time
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
16/05/2024
Full time
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
Sheet Metal Worker/Welder Manchester About Our Client: Our Client is a long-established (40+ years) and growing family-run business specializing in sheet metal fabrication and welding. We offer a friendly, relaxed workplace environment focused on quality craftsmanship. Job Summary: We are seeking an experienced, skilled Sheet Metal Worker/Welder to join our team as a subcontractor. In this hands-on role, you will have the opportunity to work on a diverse range of projects and tackle new challenges daily across mild steel, stainless steel, and aluminium fabrication. Key Responsibilities: Read and interpret technical drawings, specifications, and manufacturing plans Perform MIG and TIG welding of thin plate mild steel and stainless steel components Operate CNC press brakes, Laser cutters, and other metalworking equipment Fabricate precise, high-quality metal parts, enclosures, frames, and assemblies Maintain clean and safe Workstation, adhering to health and safety protocols Requirements: Time-served background as a Sheet Metal Worker with proven welding experience Extensive MIG and TIG welding skills for mild steel and stainless steel (essential) Ability to read and work from technical drawings and manufacturing plans (critical) Experience operating CNC press brakes (preferred) Aluminium welding experience (preferred) Strong attention to detail and pride in delivering quality workmanship Reliable, punctual, and committed to meeting deadlines Working Hours: Monday-Thursday 7:30 AM - 4:15 PM, Friday 7:30 AM - 1:30 PM Compensation & Benefits: Competitive hourly rate of £16 - £18/hour Annual bonus based on company performance (approx. 2 weeks' pay) Occasional paid overtime at 1.5x rate (rare requirement) Join our skilled fabrication team at Our Client! If you are an experienced Sheet Metal Worker/Welder looking for an opportunity to showcase your talents, apply now.
16/05/2024
Project-based
Sheet Metal Worker/Welder Manchester About Our Client: Our Client is a long-established (40+ years) and growing family-run business specializing in sheet metal fabrication and welding. We offer a friendly, relaxed workplace environment focused on quality craftsmanship. Job Summary: We are seeking an experienced, skilled Sheet Metal Worker/Welder to join our team as a subcontractor. In this hands-on role, you will have the opportunity to work on a diverse range of projects and tackle new challenges daily across mild steel, stainless steel, and aluminium fabrication. Key Responsibilities: Read and interpret technical drawings, specifications, and manufacturing plans Perform MIG and TIG welding of thin plate mild steel and stainless steel components Operate CNC press brakes, Laser cutters, and other metalworking equipment Fabricate precise, high-quality metal parts, enclosures, frames, and assemblies Maintain clean and safe Workstation, adhering to health and safety protocols Requirements: Time-served background as a Sheet Metal Worker with proven welding experience Extensive MIG and TIG welding skills for mild steel and stainless steel (essential) Ability to read and work from technical drawings and manufacturing plans (critical) Experience operating CNC press brakes (preferred) Aluminium welding experience (preferred) Strong attention to detail and pride in delivering quality workmanship Reliable, punctual, and committed to meeting deadlines Working Hours: Monday-Thursday 7:30 AM - 4:15 PM, Friday 7:30 AM - 1:30 PM Compensation & Benefits: Competitive hourly rate of £16 - £18/hour Annual bonus based on company performance (approx. 2 weeks' pay) Occasional paid overtime at 1.5x rate (rare requirement) Join our skilled fabrication team at Our Client! If you are an experienced Sheet Metal Worker/Welder looking for an opportunity to showcase your talents, apply now.
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
16/05/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
16/05/2024
Full time
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
16/05/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Our Client South West based, Our Client is a highly respected architectural metal-work and bespoke steel fabrication specialist. Working across the region, they provide high quality products and services to main contractors, developers, and private clients. Estimator A unique and exciting opportunity has arisen to join their sales and estimating team. You will have experience as an estimator having worked in the metalwork or associated construction industry trade for a minimum of 3 years. Role description: Reporting to the Sales & Estimating Director, you will be working in their busy estimating and sales office producing accurate quotations and negotiating tenders with clients. You will also be working closely with the contracts and design department at both pre-submission and post Order stage. Responsibilities include: Estimating architectural metalwork, secondary steelwork & structural steel Reading architects and engineers drawings Material takes off's and tender summaries Obtaining supplier quotations and negotiating Preparing quotations to meet deadlines Drafting detailed quotations Liaising with clients to discuss the tender submissions Sales follow ups of Quotations Attending client meetings and occasional site visits Working with other departments The right candidate will have the following: Understanding of metalwork or associated trade Background in construction industry or manufacturing Good IT skills Excellent communicator Ably to work well in a team and with good people skills Ably to work on own initiative and self-motivated Good planning and organisational skills Positive attitude to work with attention to detail Flexible approach and able to prioritise tasks You may also have experience as a QS or sales negotiating Salary Depending on experience Company Pension Scheme Free Parking
16/05/2024
Full time
Our Client South West based, Our Client is a highly respected architectural metal-work and bespoke steel fabrication specialist. Working across the region, they provide high quality products and services to main contractors, developers, and private clients. Estimator A unique and exciting opportunity has arisen to join their sales and estimating team. You will have experience as an estimator having worked in the metalwork or associated construction industry trade for a minimum of 3 years. Role description: Reporting to the Sales & Estimating Director, you will be working in their busy estimating and sales office producing accurate quotations and negotiating tenders with clients. You will also be working closely with the contracts and design department at both pre-submission and post Order stage. Responsibilities include: Estimating architectural metalwork, secondary steelwork & structural steel Reading architects and engineers drawings Material takes off's and tender summaries Obtaining supplier quotations and negotiating Preparing quotations to meet deadlines Drafting detailed quotations Liaising with clients to discuss the tender submissions Sales follow ups of Quotations Attending client meetings and occasional site visits Working with other departments The right candidate will have the following: Understanding of metalwork or associated trade Background in construction industry or manufacturing Good IT skills Excellent communicator Ably to work well in a team and with good people skills Ably to work on own initiative and self-motivated Good planning and organisational skills Positive attitude to work with attention to detail Flexible approach and able to prioritise tasks You may also have experience as a QS or sales negotiating Salary Depending on experience Company Pension Scheme Free Parking
We are IT Recruitment Specialists partnered with a prestigious Global Consultancy who required an Automotive Feature Owner E-Powertrain - Gaydon 5 days working onsite, the balance of time will be remote for one of their public sector Clients based in the UK. IR35: This role is inside of IR35 Initial duration: 4 months Role and tasks At Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities - Owns a feature or multiple features from conception to implementation to validation. - Communicate and maintain feature/function level status. - Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. - Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. - Refines use cases (end-to-end functions) to identify vehicle system features/functions. - Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. - Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. - Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Your Profile - Senior Engineer with at least eight to twelve years' experience in Automotive - Background in one of the following is preferable: E-Powertrain If you are interested in this position and would like to learn more, please send through your CV and we will get in touch with you as soon as possible. Please note, candidates are often Shortlisted within 48 hours.
16/05/2024
Project-based
We are IT Recruitment Specialists partnered with a prestigious Global Consultancy who required an Automotive Feature Owner E-Powertrain - Gaydon 5 days working onsite, the balance of time will be remote for one of their public sector Clients based in the UK. IR35: This role is inside of IR35 Initial duration: 4 months Role and tasks At Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities - Owns a feature or multiple features from conception to implementation to validation. - Communicate and maintain feature/function level status. - Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. - Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. - Refines use cases (end-to-end functions) to identify vehicle system features/functions. - Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. - Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. - Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Your Profile - Senior Engineer with at least eight to twelve years' experience in Automotive - Background in one of the following is preferable: E-Powertrain If you are interested in this position and would like to learn more, please send through your CV and we will get in touch with you as soon as possible. Please note, candidates are often Shortlisted within 48 hours.
CONTRACTOR MUST BE ELIGIBLE FOR BPSS Role Title: Automotive Feature Owner E-Powertrain Location: Gaydon 5 days per week preference - will consider partial hybrid Duration: Until 30/09/24 MUST BE PAYE THROUGH UMBRELLA Role Description: At client Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities - Owns a feature or multiple features from conception to implementation to validation. - Communicate and maintain feature/function level status. - Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. - Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. - Refines use cases (end-to-end functions) to identify vehicle system features/functions. - Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. - Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. - Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Your Profile - Senior Engineer with at least eight to twelve years' experience in Automotive - Background in one of the following is preferable: E-Powertrain
16/05/2024
Project-based
CONTRACTOR MUST BE ELIGIBLE FOR BPSS Role Title: Automotive Feature Owner E-Powertrain Location: Gaydon 5 days per week preference - will consider partial hybrid Duration: Until 30/09/24 MUST BE PAYE THROUGH UMBRELLA Role Description: At client Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities - Owns a feature or multiple features from conception to implementation to validation. - Communicate and maintain feature/function level status. - Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. - Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. - Refines use cases (end-to-end functions) to identify vehicle system features/functions. - Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. - Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. - Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Your Profile - Senior Engineer with at least eight to twelve years' experience in Automotive - Background in one of the following is preferable: E-Powertrain
Role Title: Automotive Feature Owner - ICE Location: Gaydon 5 days per week preference - will consider partial hybrid Contract Inside IR35 CONTRACTOR MUST BE ELIGIBLE FOR BPSS Role Description: At Capgemini Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities Owns a feature or multiple features from conception to implementation to validation. Communicate and maintain feature/function level status. Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. Refines use cases (end-to-end functions) to identify vehicle system features/functions. Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. Collaborate with ECU engineers to review software implementation ensuring compliance with requirements Your Profile Senior Engineer with at least eight to twelve years' experience in Automotive Background in one of the following is preferable: ICE
16/05/2024
Project-based
Role Title: Automotive Feature Owner - ICE Location: Gaydon 5 days per week preference - will consider partial hybrid Contract Inside IR35 CONTRACTOR MUST BE ELIGIBLE FOR BPSS Role Description: At Capgemini Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities Owns a feature or multiple features from conception to implementation to validation. Communicate and maintain feature/function level status. Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. Refines use cases (end-to-end functions) to identify vehicle system features/functions. Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. Collaborate with ECU engineers to review software implementation ensuring compliance with requirements Your Profile Senior Engineer with at least eight to twelve years' experience in Automotive Background in one of the following is preferable: ICE
We are Global IT Recruitment specialist that provides support to the clients across UK, Europe and Australia. We have an excellent job opportunity for you. Role Title: Automotive Engineer Location: Gaydon 5 days per week preference - will consider partial hybrid Duration: Until 30/09/24 Role Description: We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities - Owns a feature or multiple features from conception to implementation to validation. - Communicate and maintain feature/function level status. - Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. - Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. - Refines use cases (end-to-end functions) to identify vehicle system features/functions. - Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. - Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. - Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Your Profile - Senior Engineer with at least eight to twelve years' experience in Automotive - Background in one of the following is preferable: ICE
16/05/2024
Project-based
We are Global IT Recruitment specialist that provides support to the clients across UK, Europe and Australia. We have an excellent job opportunity for you. Role Title: Automotive Engineer Location: Gaydon 5 days per week preference - will consider partial hybrid Duration: Until 30/09/24 Role Description: We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software. Responsibilities - Owns a feature or multiple features from conception to implementation to validation. - Communicate and maintain feature/function level status. - Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. - Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. - Refines use cases (end-to-end functions) to identify vehicle system features/functions. - Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. - Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. - Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Your Profile - Senior Engineer with at least eight to twelve years' experience in Automotive - Background in one of the following is preferable: ICE
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
16/05/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
Role Title: Senior Automotive Engineer Duration: 3-4 Months Location: Gaydon - on site only Rate: £365/d - Umbrella only Would you like to join a global leader in consulting, technology services and digital transformation? Our client is at the forefront of innovation to address the entire breadth of opportunities in the evolving world of cloud, digital and platforms. Role purpose At Capgemini Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software . Responsibilities Owns a feature or multiple features from conception to implementation to validation. Communicate and maintain feature/function level status. Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. Refines use cases (end-to-end functions) to identify vehicle system features/functions. Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Key Skills/requirements Senior Engineer with at least eight to twelve years' experience in the automotive industry Preferable background in ICE All profiles will be reviewed against the required skills and experience. Due to the high number of applications, we will only be able to respond to successful applicants in the first instance. We thank you for your interest and the time taken to apply!
16/05/2024
Project-based
Role Title: Senior Automotive Engineer Duration: 3-4 Months Location: Gaydon - on site only Rate: £365/d - Umbrella only Would you like to join a global leader in consulting, technology services and digital transformation? Our client is at the forefront of innovation to address the entire breadth of opportunities in the evolving world of cloud, digital and platforms. Role purpose At Capgemini Automotive we drive the automotive trends of safety automation, electrification, and connectivity to the next generation of solutions. With so many new features added almost every day, we need automotive experts, and we are rapidly growing a team of SME's. We are looking for a Senior Engineer with automotive experience to deliver complex vehicle features that are cross-functional. You may come from the following (but not limited to) backgrounds: Powertrain, ADAS, Infotainment, Automotive systems, or software . Responsibilities Owns a feature or multiple features from conception to implementation to validation. Communicate and maintain feature/function level status. Defines the vehicle system features/functions and allocates the vehicle system elements to build up the functional architecture. Works with ECU engineers, program managers, electrical architecture team, product strategy and other stakeholders to align strategy and execution. Refines use cases (end-to-end functions) to identify vehicle system features/functions. Specifies vehicle system features/functions and is responsible for the completeness towards stakeholder requirements and establishes traceability, verification criteria and responsibilities. Specifies non-functional requirements, process and project execution requirements, requirements for vehicle test and validation, requirements for manufacturing. Collaborate with ECU engineers to review software implementation ensuring compliance with requirements. Key Skills/requirements Senior Engineer with at least eight to twelve years' experience in the automotive industry Preferable background in ICE All profiles will be reviewed against the required skills and experience. Due to the high number of applications, we will only be able to respond to successful applicants in the first instance. We thank you for your interest and the time taken to apply!
Produktionsexperte Solids DP (m/w/d) - GMP/EDV Kenntnisse/High-Potent-Produkten/5-Schichtmodus/Deutsch Projekt : Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir einen Produktionsexperte Solids DP (m/w/d). Hintergrund : Die Abteilung Solids DP (Solida Produktion) ist Teil des Wertstromes Solids Launch and Supply am Produktionszentrum Kaiseraugst. Die Solida Produktion hat die Produktionsbereiche LSL (Bau 261) in Kaiseraugst und SLF-27 (Bau 9/27) in Basel. Es werden in den beiden Produktionsbereichen verschiedene feste Arzneiformen (Filmtabletten, Kapseln, Granulat in Glasflaschen) hergestellt. Es werden kommerzielle sowie Entwicklungsprodukte hergestellt. Hierbei handelt es sich um ausschließlich um High-Potent-Produkten in einer Batch-Size zwischen 50 KG bis 100 KG. Das Produktionsteam besteht aus ca. 45 Mitarbeitern. Als Produktionsexperte unterstützen Sie den Produktionsbereich. Der oder die perfekte Kandidat/in : hat eine abgeschlossene Berufsausbildung im Pharmabereich und erste Erfahrungen mit der Herstellung von festen Arzneiformen. Die Person besitzt gute EDV Kenntnisse und GMP Erfahrungen. Zudem besitzt die Person gute Deutschkenntnisse in Wort und Schrift. Aufgaben : * Herstellung von Filmtabletten, Kapsel und deren Zwischenstufen * Abfüllung Granulate in Glasflaschen * Bedienen, Rüsten und Reinigen der zugehörigen Produktionsanlagen und Räumlichkeiten * GMP-konforme Dokumentation der durchgeführten Arbeiten am Computersystem * Warenbewegungen von GMP-Materialien Must Haves: * Vorzugsweise abgeschlossene Berufsausbildung im Lebensmittelbereich oder Pharmabereich * Erfahrung in der Herstellung von festen Arzneiformen (Lackierung, Tablettierung von grossem Vorteil) * Gute EDV Kenntnisse * GMP Erfahrungen * Bereitschaft zur Schichtarbeit inkl. Nacht-, Samstag- und Sonntagsarbeit (5-Schicht) * Sehr gute Deutschkenntnisse in Wort und Schrift * Zuverlässigkeit * Selbständigkeit * Teamfähigkeit . Eigeninitiative * Äusserlich gepflegtes Erscheinungsbild Nice to haves: * Erfahrung in der Herstellung von High-Potent-Produkten * Erfahrung in der Technologie Feuchtgranulierung Reference No.: 923385SDA Rolle : Produktionsexperte Solids DP Industry : Pharma Location : Kaiseraugst Workload : 100% (5-Schichtmodus) Start : ASAP (Spätestmögliches Startdatum: 01.08.2024) Duration : 18 Deadline : 23.05.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns: ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen keine zusätzlichen Gebühren.
16/05/2024
Project-based
Produktionsexperte Solids DP (m/w/d) - GMP/EDV Kenntnisse/High-Potent-Produkten/5-Schichtmodus/Deutsch Projekt : Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir einen Produktionsexperte Solids DP (m/w/d). Hintergrund : Die Abteilung Solids DP (Solida Produktion) ist Teil des Wertstromes Solids Launch and Supply am Produktionszentrum Kaiseraugst. Die Solida Produktion hat die Produktionsbereiche LSL (Bau 261) in Kaiseraugst und SLF-27 (Bau 9/27) in Basel. Es werden in den beiden Produktionsbereichen verschiedene feste Arzneiformen (Filmtabletten, Kapseln, Granulat in Glasflaschen) hergestellt. Es werden kommerzielle sowie Entwicklungsprodukte hergestellt. Hierbei handelt es sich um ausschließlich um High-Potent-Produkten in einer Batch-Size zwischen 50 KG bis 100 KG. Das Produktionsteam besteht aus ca. 45 Mitarbeitern. Als Produktionsexperte unterstützen Sie den Produktionsbereich. Der oder die perfekte Kandidat/in : hat eine abgeschlossene Berufsausbildung im Pharmabereich und erste Erfahrungen mit der Herstellung von festen Arzneiformen. Die Person besitzt gute EDV Kenntnisse und GMP Erfahrungen. Zudem besitzt die Person gute Deutschkenntnisse in Wort und Schrift. Aufgaben : * Herstellung von Filmtabletten, Kapsel und deren Zwischenstufen * Abfüllung Granulate in Glasflaschen * Bedienen, Rüsten und Reinigen der zugehörigen Produktionsanlagen und Räumlichkeiten * GMP-konforme Dokumentation der durchgeführten Arbeiten am Computersystem * Warenbewegungen von GMP-Materialien Must Haves: * Vorzugsweise abgeschlossene Berufsausbildung im Lebensmittelbereich oder Pharmabereich * Erfahrung in der Herstellung von festen Arzneiformen (Lackierung, Tablettierung von grossem Vorteil) * Gute EDV Kenntnisse * GMP Erfahrungen * Bereitschaft zur Schichtarbeit inkl. Nacht-, Samstag- und Sonntagsarbeit (5-Schicht) * Sehr gute Deutschkenntnisse in Wort und Schrift * Zuverlässigkeit * Selbständigkeit * Teamfähigkeit . Eigeninitiative * Äusserlich gepflegtes Erscheinungsbild Nice to haves: * Erfahrung in der Herstellung von High-Potent-Produkten * Erfahrung in der Technologie Feuchtgranulierung Reference No.: 923385SDA Rolle : Produktionsexperte Solids DP Industry : Pharma Location : Kaiseraugst Workload : 100% (5-Schichtmodus) Start : ASAP (Spätestmögliches Startdatum: 01.08.2024) Duration : 18 Deadline : 23.05.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns: ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen keine zusätzlichen Gebühren.
Role: Mechanical Design Engineer Salary: £35,000 to £50,000 Location: Basingstoke, Hampshire Company: Global Design & Manufacture of both bespoke and off she shelf products Always excited by the prospect of working with this close-knit team, given their brand and the reach of the wider Group. Inhouse they Design, Prototype, Build, Test and make their products, the team is R&D/Engineering heavy and if you are an engineer at heart, someone who wants to get fully involved in your design projects and develop your skills, you'll love it here. The successful Mechanical Design Engineer will be working with an experienced team who they can learn from, but also be given autonomy to find their own way. Responsibilities: Concept and Detailed Design Develop and Innovate new solutions within new markets Liaise with manufacturing and customers alike Create reports and plans Be involved in testing and prototyping Essential Skills: Use of 3D CAD, preferably Solidworks (other similar packages considered) Industry experience as a Design Engineer for 2 years or more Mechanical Engineering Qualification to be held (Degree, HND/HNC, BTEC, NVQ) Ability to manage 4-5 projects simultaneously What is in it for you? Ability to get hold of your own projects Autonomy given, but also support in your professional development available Hybrid working opportunity (first 6 months on site, to learn product line) A great environment with a team and business, who want engineers to enjoy what they do and develop along the way to benefit all. Please apply with your up to date CV or contact James Ewart at Tiro Partners.
16/05/2024
Full time
Role: Mechanical Design Engineer Salary: £35,000 to £50,000 Location: Basingstoke, Hampshire Company: Global Design & Manufacture of both bespoke and off she shelf products Always excited by the prospect of working with this close-knit team, given their brand and the reach of the wider Group. Inhouse they Design, Prototype, Build, Test and make their products, the team is R&D/Engineering heavy and if you are an engineer at heart, someone who wants to get fully involved in your design projects and develop your skills, you'll love it here. The successful Mechanical Design Engineer will be working with an experienced team who they can learn from, but also be given autonomy to find their own way. Responsibilities: Concept and Detailed Design Develop and Innovate new solutions within new markets Liaise with manufacturing and customers alike Create reports and plans Be involved in testing and prototyping Essential Skills: Use of 3D CAD, preferably Solidworks (other similar packages considered) Industry experience as a Design Engineer for 2 years or more Mechanical Engineering Qualification to be held (Degree, HND/HNC, BTEC, NVQ) Ability to manage 4-5 projects simultaneously What is in it for you? Ability to get hold of your own projects Autonomy given, but also support in your professional development available Hybrid working opportunity (first 6 months on site, to learn product line) A great environment with a team and business, who want engineers to enjoy what they do and develop along the way to benefit all. Please apply with your up to date CV or contact James Ewart at Tiro Partners.
We are recruiting for an Aircraft Stress Engineer on contract to work in our clients offices in Bristol 3 days per week and remote 2 days per week (Hybrid) Working as part of an expert multiskilled team you will be responsible for static strength analysis and justification of metallic and composite structures. Your primary role will be to work closely with design and F&DT (Fatigue and Damage Tolerance) engineers to assess and validate repairs to damaged aircraft structures. You will ensure adherence to airworthiness regulations, relevant design principles, processes, methods and manufacturing capabilities guidelines. We are a dynamic multifunctional team delivering structural repairs and repair processes to support the fleet. We work closely together to provide complex repairs in support of planned major repair activities, Major Test programmes and fleet issues. We enjoy the challenge of creating and delivering repairs for any sort of damage, anywhere on the wing! What you will be doing Using approved methods and tools to perform structural static strength analysis of repairs. Creating and compiling justification reports and associated engineering documentation. Working closely with skilled designers to develop optimum repairs. About You You are a skilled aerospace structural analysis engineer, with experience of how airframe repairs are developed and justified. You enjoy working as part of a team to develop effective solutions to complex technical problems and ensure efficient delivery of tasks. Essential Skills Aerospace Engineering degree (or equivalent) and relevant engineering experience. Experience of static analysis of aircraft structures using a range of hand and computer methods. An understanding of the fundamental methods of static stress analysis and an ability to develop these methods. Knowledge and experience of using static strength analysis tools and methods (including ISAMI and Mathcad). Experience of compiling static strength justification reports to standards and ways of working. Good interpersonal and communication skills (both written and verbal). Preferred Skills Be conversant with technical requirements for repair design. Be comfortable working with and manipulating large datasets. Delegated signature for structural analy
15/05/2024
Project-based
We are recruiting for an Aircraft Stress Engineer on contract to work in our clients offices in Bristol 3 days per week and remote 2 days per week (Hybrid) Working as part of an expert multiskilled team you will be responsible for static strength analysis and justification of metallic and composite structures. Your primary role will be to work closely with design and F&DT (Fatigue and Damage Tolerance) engineers to assess and validate repairs to damaged aircraft structures. You will ensure adherence to airworthiness regulations, relevant design principles, processes, methods and manufacturing capabilities guidelines. We are a dynamic multifunctional team delivering structural repairs and repair processes to support the fleet. We work closely together to provide complex repairs in support of planned major repair activities, Major Test programmes and fleet issues. We enjoy the challenge of creating and delivering repairs for any sort of damage, anywhere on the wing! What you will be doing Using approved methods and tools to perform structural static strength analysis of repairs. Creating and compiling justification reports and associated engineering documentation. Working closely with skilled designers to develop optimum repairs. About You You are a skilled aerospace structural analysis engineer, with experience of how airframe repairs are developed and justified. You enjoy working as part of a team to develop effective solutions to complex technical problems and ensure efficient delivery of tasks. Essential Skills Aerospace Engineering degree (or equivalent) and relevant engineering experience. Experience of static analysis of aircraft structures using a range of hand and computer methods. An understanding of the fundamental methods of static stress analysis and an ability to develop these methods. Knowledge and experience of using static strength analysis tools and methods (including ISAMI and Mathcad). Experience of compiling static strength justification reports to standards and ways of working. Good interpersonal and communication skills (both written and verbal). Preferred Skills Be conversant with technical requirements for repair design. Be comfortable working with and manipulating large datasets. Delegated signature for structural analy
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
15/05/2024
Full time
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
SC Cleared Assembly Technician £400 pd Inside IR35 Guildford (on site) * REQUIRES ACTIVE SC CLEARANCE* Overview: Here at Anson McCade we are working with the largest UK defence consultancy to recruit for an assembly technician to join on a contract basis. You will be involved with all aspects of the assembly and test of complex digital and analogue electronic products, working closely with a team of Manufacturing Engineers and Hardware Developers. You will work across all stages of the product life cycle including prototypes, productionisation, production and support, This role is 5 days a week on site. The skill set we are looking for: Any RF or DeBug experience Electronics background Experience with PCB's good Some soldering skills useful - IPC Qualification practical engineering experience working in a live electronics production environment Understanding of electronic principles, circuit diagrams, assembly drawings, BoMs and test specifications. Contract Details: Guildford 5 days on site £400 pd Inside IR35 3 month initial contract with view to extend. REQUIRES ACTIVE SC CLEARANCE
15/05/2024
Project-based
SC Cleared Assembly Technician £400 pd Inside IR35 Guildford (on site) * REQUIRES ACTIVE SC CLEARANCE* Overview: Here at Anson McCade we are working with the largest UK defence consultancy to recruit for an assembly technician to join on a contract basis. You will be involved with all aspects of the assembly and test of complex digital and analogue electronic products, working closely with a team of Manufacturing Engineers and Hardware Developers. You will work across all stages of the product life cycle including prototypes, productionisation, production and support, This role is 5 days a week on site. The skill set we are looking for: Any RF or DeBug experience Electronics background Experience with PCB's good Some soldering skills useful - IPC Qualification practical engineering experience working in a live electronics production environment Understanding of electronic principles, circuit diagrams, assembly drawings, BoMs and test specifications. Contract Details: Guildford 5 days on site £400 pd Inside IR35 3 month initial contract with view to extend. REQUIRES ACTIVE SC CLEARANCE
iO Associates are looking for Mechanical Fitter to develop manufacturing technology and realize new products and systems. Set up, monitor and operate various piece of equipment associated with the manufacturing facility requirements to undertake the Assembly and Test Surface Pressure Control equipment. Their cutting-edge solutions and services are advancing the energy industry and making it safer, cleaner, and more effective for people and the environment. They are based on a century of experience and do business in over 120 countries. Job Title: Mechanical Fitter Location: Aberdeen, Aberdeenshire Duration: 12 months contract to permanent. Hours: Dayshift (07:00 - 15:30) Backshift (15:30 - 00:00) (shift pattern is on a rotational basis from week to week) Responsibilities: Carrying out Test & Assembly of Surface Wellhead Products. New build manufacture & repair work scopes. Strip, inspection, assembly & repair. Pressure Testing Surface Wellhead equipment. Assembling Surface Wellhead equipment and components from specifications and drawings for customer requirements. Recording defects and errors in line with company procedures. Engaging with safety initiatives on site, especially HRO councils eg pressure safety/lifting. To be successful in this role you will: Hold a relevant qualification or demonstrate substantial experience in lieu of qualification. Have experience working on Surface Wellhead equipment. Have good knowledge of HSE requirements and be able to follow safety policies and procedures. If you are looking to work for a company that gives you a career framework with a clear development path, please reply with your CV and references.
15/05/2024
iO Associates are looking for Mechanical Fitter to develop manufacturing technology and realize new products and systems. Set up, monitor and operate various piece of equipment associated with the manufacturing facility requirements to undertake the Assembly and Test Surface Pressure Control equipment. Their cutting-edge solutions and services are advancing the energy industry and making it safer, cleaner, and more effective for people and the environment. They are based on a century of experience and do business in over 120 countries. Job Title: Mechanical Fitter Location: Aberdeen, Aberdeenshire Duration: 12 months contract to permanent. Hours: Dayshift (07:00 - 15:30) Backshift (15:30 - 00:00) (shift pattern is on a rotational basis from week to week) Responsibilities: Carrying out Test & Assembly of Surface Wellhead Products. New build manufacture & repair work scopes. Strip, inspection, assembly & repair. Pressure Testing Surface Wellhead equipment. Assembling Surface Wellhead equipment and components from specifications and drawings for customer requirements. Recording defects and errors in line with company procedures. Engaging with safety initiatives on site, especially HRO councils eg pressure safety/lifting. To be successful in this role you will: Hold a relevant qualification or demonstrate substantial experience in lieu of qualification. Have experience working on Surface Wellhead equipment. Have good knowledge of HSE requirements and be able to follow safety policies and procedures. If you are looking to work for a company that gives you a career framework with a clear development path, please reply with your CV and references.