Spectrum IT Recruitment (South) Ltd
Bath, Somerset
Software Development Engineer required by a successful, expanding company located in Bath. Due to continued growth the company now requires a Software Development Engineer to job their Research and Development team. This role is to help develop code, graphics, and user experience to design digital models of 3D objects. You will develop prototypes of new design features and workflows through research and development of new modelling techniques and the development of code in both Python and C++. Looking for someone with: A Degree within a technical subject Degree-level qualification in animation, digital modelling or graphics programming of 3D objects and scenes. Previous experience in digital animation, digital modelling, or graphics programming for eg movies or computer games development, Programming experience in Python, MATLAB or a similar programming language. Familiarity with additive manufacturing (AM) Familiarity with the principles of Design for Additive Manufacturing processes. The following are preferred but not a prerequisite: Experience in C++ programming Familiarity with GIT for revision control Experience in generating digital models of 3D objects using programming If you are looking for an opportunity of this nature please get in touch for more information /(see below) Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy.
26/04/2024
Full time
Software Development Engineer required by a successful, expanding company located in Bath. Due to continued growth the company now requires a Software Development Engineer to job their Research and Development team. This role is to help develop code, graphics, and user experience to design digital models of 3D objects. You will develop prototypes of new design features and workflows through research and development of new modelling techniques and the development of code in both Python and C++. Looking for someone with: A Degree within a technical subject Degree-level qualification in animation, digital modelling or graphics programming of 3D objects and scenes. Previous experience in digital animation, digital modelling, or graphics programming for eg movies or computer games development, Programming experience in Python, MATLAB or a similar programming language. Familiarity with additive manufacturing (AM) Familiarity with the principles of Design for Additive Manufacturing processes. The following are preferred but not a prerequisite: Experience in C++ programming Familiarity with GIT for revision control Experience in generating digital models of 3D objects using programming If you are looking for an opportunity of this nature please get in touch for more information /(see below) Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy.
Job title: Project Manager Location: Hampton Court, West London, UK Job type: Permanent Salary: £50k per annum iO Associates is looking for a Project manager with a company that creates, produces, and markets high-end goods for the rapidly evolving entertainment sector that enable artists to explore new frontiers and communicate their ideas through striking scenic motion. Working closely with the project management team, the head of engineering, and the general manager, you will oversee all engineering projects from start to finish, making sure they are completed on schedule and under budget. Along the way, you'll report progress to the business and manage risks. Required: You have a track record of successfully overseeing several projects at once in an engineering setting. familiarity with or background in building BOMs. two or more years of project management experience, preferably in the industrial sector. While not required, familiarity with an ERP system-ideally Epicor-is desirable. Responsibilities: You will map out the phases, schedules, finances, and benchmarks that a multidisciplinary engineering team needs in order to take high level project plans and transform them into detailed project plans in collaboration with the head of engineering. Gantt charts and other suitable project management tools will be used to help with planning. You will communicate with the engineering team in a clear and concise manner, stating exactly what you need and by when. To let everyone know how they are doing and to draw attention to any hazards to the project's completion, you will employ visual aids and tools. Systems and MRP: ensuring that, after the manufacturing and engineering teams have finished a work, all jobs are closed. This is a role with visits to the site. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth and career development throughout the organisation. Please apply on the link below or contact us if you want to know more about the role and company.
26/04/2024
Full time
Job title: Project Manager Location: Hampton Court, West London, UK Job type: Permanent Salary: £50k per annum iO Associates is looking for a Project manager with a company that creates, produces, and markets high-end goods for the rapidly evolving entertainment sector that enable artists to explore new frontiers and communicate their ideas through striking scenic motion. Working closely with the project management team, the head of engineering, and the general manager, you will oversee all engineering projects from start to finish, making sure they are completed on schedule and under budget. Along the way, you'll report progress to the business and manage risks. Required: You have a track record of successfully overseeing several projects at once in an engineering setting. familiarity with or background in building BOMs. two or more years of project management experience, preferably in the industrial sector. While not required, familiarity with an ERP system-ideally Epicor-is desirable. Responsibilities: You will map out the phases, schedules, finances, and benchmarks that a multidisciplinary engineering team needs in order to take high level project plans and transform them into detailed project plans in collaboration with the head of engineering. Gantt charts and other suitable project management tools will be used to help with planning. You will communicate with the engineering team in a clear and concise manner, stating exactly what you need and by when. To let everyone know how they are doing and to draw attention to any hazards to the project's completion, you will employ visual aids and tools. Systems and MRP: ensuring that, after the manufacturing and engineering teams have finished a work, all jobs are closed. This is a role with visits to the site. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth and career development throughout the organisation. Please apply on the link below or contact us if you want to know more about the role and company.
A global medical device company are urgently looking for a Senior Project Manager to join their Research and Development team on a contract basis. You'll be working with a team of multi-disciplinary engineers to bring together an expanding medical device R&D project. Essential skills: Medical device, biotech or pharmaceutical project management experience Degree in science, engineering or similar Experience managing high value projects on time and to budget Regulatory knowledge, understanding and experience Desirable skills: Excellent communication skills Excellent IT skills for project planning Stakeholder management experience The start date is for ASAP. The initial contract length is for 12 months (there will be options to extend multiple times). The role is based in Limerick and can be done mostly remotely. You will only need to come onsite 1-2 times per week. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
26/04/2024
Project-based
A global medical device company are urgently looking for a Senior Project Manager to join their Research and Development team on a contract basis. You'll be working with a team of multi-disciplinary engineers to bring together an expanding medical device R&D project. Essential skills: Medical device, biotech or pharmaceutical project management experience Degree in science, engineering or similar Experience managing high value projects on time and to budget Regulatory knowledge, understanding and experience Desirable skills: Excellent communication skills Excellent IT skills for project planning Stakeholder management experience The start date is for ASAP. The initial contract length is for 12 months (there will be options to extend multiple times). The role is based in Limerick and can be done mostly remotely. You will only need to come onsite 1-2 times per week. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Junior Product Owner - Engineering Systems - Outside Ir35 We are looking for a Junior IT product owner with a good understanding of engineering software & systems for a long term outside ir35 contract engagement. Our client is a blue Chip organisation with global reach so this is a great opportunity to develop your skills at a highly reputable organisation. Key Skills: Engineering software or engineering systems knowledge Requirement gathering and analysis Workflow optimisation Managing Product Backlog Overseeing product development stages Experience pitching solutions Manufacturing or Engineering company backgrounds are a plus Details: 6 month rolling contract basis 5 days onsite in Staffordshire Outside ir35 set-up
25/04/2024
Project-based
Junior Product Owner - Engineering Systems - Outside Ir35 We are looking for a Junior IT product owner with a good understanding of engineering software & systems for a long term outside ir35 contract engagement. Our client is a blue Chip organisation with global reach so this is a great opportunity to develop your skills at a highly reputable organisation. Key Skills: Engineering software or engineering systems knowledge Requirement gathering and analysis Workflow optimisation Managing Product Backlog Overseeing product development stages Experience pitching solutions Manufacturing or Engineering company backgrounds are a plus Details: 6 month rolling contract basis 5 days onsite in Staffordshire Outside ir35 set-up
Tiro Partners have a live requirement for a Manufacturing Engineer with a key client who are market leaders within the Aerospace sector. My client is offering an initial 6 month contract (extensions possible), Outside IR35. Site presences is required. Essential skills/experience required: FAIRS/PPAP NPI Launch, Supply chain assessment. Experience of precision machining. Industry experience - Aerospace, Manufacturing. To avoid missing out on this opportunity, plese apply with your most up to date CV
25/04/2024
Project-based
Tiro Partners have a live requirement for a Manufacturing Engineer with a key client who are market leaders within the Aerospace sector. My client is offering an initial 6 month contract (extensions possible), Outside IR35. Site presences is required. Essential skills/experience required: FAIRS/PPAP NPI Launch, Supply chain assessment. Experience of precision machining. Industry experience - Aerospace, Manufacturing. To avoid missing out on this opportunity, plese apply with your most up to date CV
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
25/04/2024
Full time
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
25/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
Production Engineering defines how the product will be manufactured by the production teams including the design packaging enabling the right quantity of components/product are delivered to support the speed of the production process. The department also reviews efficiencies and eliminates waste within the manufacturing process ensuring delivery of high quality products to clearly defined standards. Key areas of responsibility for the role includes: Responsible for increasing manufacturing productivity by an agreed % per annum in line with Site targets Responsible for supporting operations on daily issues Responsible for leading Capex projects from justification through specification, procurement and validation Lead/attend engineering/technical review meetings and present work status and provide feedback where required To work closely with the Quality Engineers to improve equipment capability in line with site specific targets Assess the manufacturing requirements associated with a product, compare to existing capabilities and make recommendations for development The successful candidate will be able to demonstrate the following: A HNC or HND qualification or higher in a relevant Engineering discipline or equivalent Previous proven experience in a production manufacturing environment Previous experience within a production environment in a Manufacturing Engineering role Previous experience in lean manufacturing tools and techniques, including, but not limited to; value stream mapping, 6S, KanBan, Kaizen, MRL, PFMEA and SPC Experience in Manufacturing Engineering in an ISO 9001 environment Experience in project delivery and problem solving Experience of operating within a strong H&S Culture
25/04/2024
Full time
Production Engineering defines how the product will be manufactured by the production teams including the design packaging enabling the right quantity of components/product are delivered to support the speed of the production process. The department also reviews efficiencies and eliminates waste within the manufacturing process ensuring delivery of high quality products to clearly defined standards. Key areas of responsibility for the role includes: Responsible for increasing manufacturing productivity by an agreed % per annum in line with Site targets Responsible for supporting operations on daily issues Responsible for leading Capex projects from justification through specification, procurement and validation Lead/attend engineering/technical review meetings and present work status and provide feedback where required To work closely with the Quality Engineers to improve equipment capability in line with site specific targets Assess the manufacturing requirements associated with a product, compare to existing capabilities and make recommendations for development The successful candidate will be able to demonstrate the following: A HNC or HND qualification or higher in a relevant Engineering discipline or equivalent Previous proven experience in a production manufacturing environment Previous experience within a production environment in a Manufacturing Engineering role Previous experience in lean manufacturing tools and techniques, including, but not limited to; value stream mapping, 6S, KanBan, Kaizen, MRL, PFMEA and SPC Experience in Manufacturing Engineering in an ISO 9001 environment Experience in project delivery and problem solving Experience of operating within a strong H&S Culture
Infoplus Technologies UK Ltd
Durham, County Durham
Responsibilities: Developing, analysing and managing Manufacturing/Fabrication/Paint/Assembly Projects. Assisting in developing department capital and expense budgets as well as maintaining the department capital forecast. - Administering the New Product Introduction (NPI) process to ensure that Engineering drawings are released and processed on time for NPI build. Leading, developing and supporting timely Design for Manufacture Best Practices, Operation Excellence Process Validation Best Practices and Lean Operation Excellence and Manufacturing Best Practices. Engaging in creative problem solving to address operational issues including: ergonomic/safety, efficiency improvements, process bottlenecks, quality concerns. Working with internal and external suppliers to develop and manage projects to ensure efficient and cost- effective systems and processes to produce quality products. Providing the application, procurement, processing, installation and capability of new fabrication, material handling, test, heat treat, welding, painting and/or chemical processes and equipment. Designing, developing and implementing the integration of manufacturing systems including factory control software, scheduling techniques, simulation and systems application. Coordinating, planning, monitoring and reporting the activities associated with the flow analysis, design, financial modelling and implementation of complex manufacturing group technology cells in an assigned area. Coordinating the purchase and application of machine tools, controls and related equipment corporate wide to ensure the latest technology is being used to increase efficiency and economy of operations. Supporting designing complex or intricate jigs and fixtures. Desirable: University technical master's degree in a manufacturing engineering-related discipline Familiar with company policies and procedures with a strong department background. Able to build strong relationships and collaborate with various stakeholders. Lean manufacturing training and qualifications CE/PUWER Qualifications Safety/Ergonomic Qualifications Safety NEBOSH/IOSH Qualification and/or be able to demonstrate through previous experience, a positive attitude and commitment towards Safety Leadership Experience and Qualifications APQP/PPAP Experience and Qualifications
25/04/2024
Full time
Responsibilities: Developing, analysing and managing Manufacturing/Fabrication/Paint/Assembly Projects. Assisting in developing department capital and expense budgets as well as maintaining the department capital forecast. - Administering the New Product Introduction (NPI) process to ensure that Engineering drawings are released and processed on time for NPI build. Leading, developing and supporting timely Design for Manufacture Best Practices, Operation Excellence Process Validation Best Practices and Lean Operation Excellence and Manufacturing Best Practices. Engaging in creative problem solving to address operational issues including: ergonomic/safety, efficiency improvements, process bottlenecks, quality concerns. Working with internal and external suppliers to develop and manage projects to ensure efficient and cost- effective systems and processes to produce quality products. Providing the application, procurement, processing, installation and capability of new fabrication, material handling, test, heat treat, welding, painting and/or chemical processes and equipment. Designing, developing and implementing the integration of manufacturing systems including factory control software, scheduling techniques, simulation and systems application. Coordinating, planning, monitoring and reporting the activities associated with the flow analysis, design, financial modelling and implementation of complex manufacturing group technology cells in an assigned area. Coordinating the purchase and application of machine tools, controls and related equipment corporate wide to ensure the latest technology is being used to increase efficiency and economy of operations. Supporting designing complex or intricate jigs and fixtures. Desirable: University technical master's degree in a manufacturing engineering-related discipline Familiar with company policies and procedures with a strong department background. Able to build strong relationships and collaborate with various stakeholders. Lean manufacturing training and qualifications CE/PUWER Qualifications Safety/Ergonomic Qualifications Safety NEBOSH/IOSH Qualification and/or be able to demonstrate through previous experience, a positive attitude and commitment towards Safety Leadership Experience and Qualifications APQP/PPAP Experience and Qualifications
Chip Manufacturing Support Engineer Initial 1 year freelance contract + extensions Leuven, Belgium Please note that working from home is not possible for this position, as the nature of the tasks involved requires being physically present in the office. We believe in fostering a vibrant and interactive work environment that promotes effective collaboration, creativity, and productivity in this challenging assignment. Provide support to customers submitting their circuit designs for fabrication and supporting R&D activities related to the creation of reports and documentation. The assignment Provide support to customers submitting their circuit designs for fabrication. Helping to improve the PDK documentation from a user point of view. Point of contact to handle modelling questions from the different software providers. Validation of PDK documentation, DRC rules and models. Required knowledge and skills An engineering or science background to the level of bachelor/master's degree is required. Having experience programming in Python and with git is required. Good communication skills. Good written and spoken technical English is a must. Ability to work well in a team. Ability to handle unexpected situations calmly and professionally. A background or completed courses in photonic integrated circuit design is a plus. Ability to prepare and write technical reports and documentation is a plus. Experience with Mentor Graphic's "Calibre" design rule checking software is a plus
24/04/2024
Project-based
Chip Manufacturing Support Engineer Initial 1 year freelance contract + extensions Leuven, Belgium Please note that working from home is not possible for this position, as the nature of the tasks involved requires being physically present in the office. We believe in fostering a vibrant and interactive work environment that promotes effective collaboration, creativity, and productivity in this challenging assignment. Provide support to customers submitting their circuit designs for fabrication and supporting R&D activities related to the creation of reports and documentation. The assignment Provide support to customers submitting their circuit designs for fabrication. Helping to improve the PDK documentation from a user point of view. Point of contact to handle modelling questions from the different software providers. Validation of PDK documentation, DRC rules and models. Required knowledge and skills An engineering or science background to the level of bachelor/master's degree is required. Having experience programming in Python and with git is required. Good communication skills. Good written and spoken technical English is a must. Ability to work well in a team. Ability to handle unexpected situations calmly and professionally. A background or completed courses in photonic integrated circuit design is a plus. Ability to prepare and write technical reports and documentation is a plus. Experience with Mentor Graphic's "Calibre" design rule checking software is a plus
Endeavour Recruitment has an excellent contract opportunity for a First Article Inspection Engineer with manufacturing experience to join a leading defence client based onsite in Bolton. Eligibility for Security Clearance is mandatory. Duties: Conduct First Article Inspection (FAI) activities as part of the delivery of the Industrial Validation plans ensuring that Manufacturing and related processes are applied across all projects and to help review supplier FAIs to ensure they meet requirements. This is a challenging Subject Matter Expert' role that requires a highly technical mind set and a considerable level of attention to detail. It will offer variety across several key topics within the Manufacturing environment and will offer you the chance to make a significant contribution to product safety, continual improvement, and our business reputation. Undertake preparation of First Article Inspections activities through the analysis of the manufacturing data-pack and understanding of the associated processes, gathering all the necessary information required. Produce First Article Inspection reports by auditing and analysing the operations and processes being conducted in the relevant manufacturing area. Identify non-conformances and areas for improvement during the FAI process ensuring the relevant IAR (improvement Action Requests) are managed to satisfactory closure. Carry out the compilation of First Article Inspection Reports (FAIRs) detailing findings from FAI conducted. Provide technical and process support to manufacturing to support closure of non-conformances ensuring that the necessary actions have been implemented to prevent recurrence of the issues. Conduct reviews of Supplier FAIRs ensuring they meet the requirements placed, liaising with the Industrial manufacturing engineers to help resolve any issues identified to release the parts for use in production. Required skills: Qualified to minimum HNC/HND in relevant subject ideally. Quality Audit experience required. Extensive knowledge and experience of EN/AS9100 and EN/AS9102. Experience in the compilation of FAI reports. Excellent interpersonal skills. Capability to identify sustainable business improvements & ensure effective implementation. Recognise and understand internal and external customer requirements and respond to them. Planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives. Experience in the compilation of FAI reports detailing findings from FAI conducted. Does the above match your experience and expectations? Please get in touch for further details!
24/04/2024
Project-based
Endeavour Recruitment has an excellent contract opportunity for a First Article Inspection Engineer with manufacturing experience to join a leading defence client based onsite in Bolton. Eligibility for Security Clearance is mandatory. Duties: Conduct First Article Inspection (FAI) activities as part of the delivery of the Industrial Validation plans ensuring that Manufacturing and related processes are applied across all projects and to help review supplier FAIs to ensure they meet requirements. This is a challenging Subject Matter Expert' role that requires a highly technical mind set and a considerable level of attention to detail. It will offer variety across several key topics within the Manufacturing environment and will offer you the chance to make a significant contribution to product safety, continual improvement, and our business reputation. Undertake preparation of First Article Inspections activities through the analysis of the manufacturing data-pack and understanding of the associated processes, gathering all the necessary information required. Produce First Article Inspection reports by auditing and analysing the operations and processes being conducted in the relevant manufacturing area. Identify non-conformances and areas for improvement during the FAI process ensuring the relevant IAR (improvement Action Requests) are managed to satisfactory closure. Carry out the compilation of First Article Inspection Reports (FAIRs) detailing findings from FAI conducted. Provide technical and process support to manufacturing to support closure of non-conformances ensuring that the necessary actions have been implemented to prevent recurrence of the issues. Conduct reviews of Supplier FAIRs ensuring they meet the requirements placed, liaising with the Industrial manufacturing engineers to help resolve any issues identified to release the parts for use in production. Required skills: Qualified to minimum HNC/HND in relevant subject ideally. Quality Audit experience required. Extensive knowledge and experience of EN/AS9100 and EN/AS9102. Experience in the compilation of FAI reports. Excellent interpersonal skills. Capability to identify sustainable business improvements & ensure effective implementation. Recognise and understand internal and external customer requirements and respond to them. Planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives. Experience in the compilation of FAI reports detailing findings from FAI conducted. Does the above match your experience and expectations? Please get in touch for further details!
Hardware Design Engineer - Permanent - Glasgow, Edinburgh, or Prestwick (hybrid) Evolve IT Recruitment are hiring for an exciting new opportunity with our ambitious client that is a leader in providing innovative products and solutions in the global video surveillance industry. Our client is keen to hire someone that thrives in a team-based and highly collaborative culture, where learning new technology and having fun are as important as your design and support in delivering to a leading manufacturing process. You will have the opportunity to work on exciting and challenging projects, applying your expert knowledge and skills to new product development, supporting the full life cycle from concept to manufacture. Ideally your background will include digital design and development, schematic capture, and EMC design practices, as well as any experience in PCB layouts and FPGA development. Our client has offices in Prestwick, Glasgow, and Edinburgh - you can be office based or work hybrid - they are happy to support what suits you and helps you to achieve your best work. Responsibilities: - You will be responsible for new product development, supporting the full life cycle from concept to manufacture - Maintain and update existing hardware designs - Manage external resources as required to deliver your projects - Work with the Design team, to meet brand and design requirements - Support the testing and debugging of new hardware, developing and utilising test software as required. - Aid the development of production test tools and software - Work with the software team, assist in the management and control of software releases Essential: - Digital Design and Development - Schematic Capture - EMC Design Practices - Test and Debugging - Generating production documentation Desirable: - Analogue Design experience - Any experience of OrCAD, Design Spark schematic capture packages - PCB Layout and FPGA development - VHDL, Altera, Lattice, Timing closure - Firmware development - Microcontroller or Linux - PCB Rework - Surface mount assembly
24/04/2024
Full time
Hardware Design Engineer - Permanent - Glasgow, Edinburgh, or Prestwick (hybrid) Evolve IT Recruitment are hiring for an exciting new opportunity with our ambitious client that is a leader in providing innovative products and solutions in the global video surveillance industry. Our client is keen to hire someone that thrives in a team-based and highly collaborative culture, where learning new technology and having fun are as important as your design and support in delivering to a leading manufacturing process. You will have the opportunity to work on exciting and challenging projects, applying your expert knowledge and skills to new product development, supporting the full life cycle from concept to manufacture. Ideally your background will include digital design and development, schematic capture, and EMC design practices, as well as any experience in PCB layouts and FPGA development. Our client has offices in Prestwick, Glasgow, and Edinburgh - you can be office based or work hybrid - they are happy to support what suits you and helps you to achieve your best work. Responsibilities: - You will be responsible for new product development, supporting the full life cycle from concept to manufacture - Maintain and update existing hardware designs - Manage external resources as required to deliver your projects - Work with the Design team, to meet brand and design requirements - Support the testing and debugging of new hardware, developing and utilising test software as required. - Aid the development of production test tools and software - Work with the software team, assist in the management and control of software releases Essential: - Digital Design and Development - Schematic Capture - EMC Design Practices - Test and Debugging - Generating production documentation Desirable: - Analogue Design experience - Any experience of OrCAD, Design Spark schematic capture packages - PCB Layout and FPGA development - VHDL, Altera, Lattice, Timing closure - Firmware development - Microcontroller or Linux - PCB Rework - Surface mount assembly
I am currently looking for a Product Engineer (Electrical) for an automotive client based in Milton Keynes on a contract basis. Here are the key details: Job Type: Contract - initial 9 months with likely extensions ( INSIDE OF IR35 ) Rate: £35-40 p/h Location: Milton Keynes - 2 days a week on site Key Tasks: Own Design and Release of Electrical Commodities and Electrical Components across various Battery programs Central point of coordination and decision making between product line engineers, customer teams, systems engineers, purchasing, suppliers and manufacturing About You: Experience of complex Electrical Distribution and Electrical Automotive Systems Experience in specifying and designing automotive/battery pack low voltage, high voltage and control hardware Degree in relevant Engineering discipline with a minimum 5 years relevant experience If you are interested then please send me your CV and I will be in touch. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive Recruitment Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
24/04/2024
Project-based
I am currently looking for a Product Engineer (Electrical) for an automotive client based in Milton Keynes on a contract basis. Here are the key details: Job Type: Contract - initial 9 months with likely extensions ( INSIDE OF IR35 ) Rate: £35-40 p/h Location: Milton Keynes - 2 days a week on site Key Tasks: Own Design and Release of Electrical Commodities and Electrical Components across various Battery programs Central point of coordination and decision making between product line engineers, customer teams, systems engineers, purchasing, suppliers and manufacturing About You: Experience of complex Electrical Distribution and Electrical Automotive Systems Experience in specifying and designing automotive/battery pack low voltage, high voltage and control hardware Degree in relevant Engineering discipline with a minimum 5 years relevant experience If you are interested then please send me your CV and I will be in touch. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive Recruitment Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
We are currently looking for a PriceFx Domain Consultant to work in the UK. We are looking for someone with PriceFx functional & technical experience & skills to deliver implementation & integration projects for oil & gas, manufacturing or other industry clients The Domain Consultant will Work closely with Business and IT to discuss business requirements, challenges & expectations, generate innovative approaches to existing Other duties include: problems or new opportunities Responsible for identifying and documenting the business needs of clients Work on assigned projects to bring valuable business domain, technical and application knowledge Set up & Configure PriceFx modules like price setting, quoting, analytics, price optimization, rebates based on business & functional requirements to deliver desired outcome Describe pricing module & technology in terms easily understood by business customers and set realistic customer expectations for the project outcome Capture business problems, value drivers, functional and non-functional requirements, including health, safety, security, usability, data, supportability considerations Assess and model processes, data flows, and technology to understand the current gaps and issues, opportunities for improvement, create clear documentation requirement, design documentations Keep updated to align with the solution over the project life cycle of implementation, integration, enhancement, managed services Ensure traceability of requirements from business needs and requirements, through testing and scope changes, to final solution Configure and document software and processes, using agreed standards and tools Create acceptance criteria and validate that solutions meet business needs through defining and coordinating testing Perform Unit, System Integration and E2E process testing for new enhancements, projects Perform or facilitate change management communication to the user community on future IT solution changes (ie raise change ticket) Guide business stakeholders to gain acceptance/sign-off What we're looking for Engg, Engg+MBA PriceFx Trained or certified Configuration Engineer PriceFx trained business user, data migration and integration engineer 5-10+ years of industry experience in PriceFx implementation, integration with at least 1-2 end to end implementation experience Excellent written and oral communication, stakeholder engagement
24/04/2024
Project-based
We are currently looking for a PriceFx Domain Consultant to work in the UK. We are looking for someone with PriceFx functional & technical experience & skills to deliver implementation & integration projects for oil & gas, manufacturing or other industry clients The Domain Consultant will Work closely with Business and IT to discuss business requirements, challenges & expectations, generate innovative approaches to existing Other duties include: problems or new opportunities Responsible for identifying and documenting the business needs of clients Work on assigned projects to bring valuable business domain, technical and application knowledge Set up & Configure PriceFx modules like price setting, quoting, analytics, price optimization, rebates based on business & functional requirements to deliver desired outcome Describe pricing module & technology in terms easily understood by business customers and set realistic customer expectations for the project outcome Capture business problems, value drivers, functional and non-functional requirements, including health, safety, security, usability, data, supportability considerations Assess and model processes, data flows, and technology to understand the current gaps and issues, opportunities for improvement, create clear documentation requirement, design documentations Keep updated to align with the solution over the project life cycle of implementation, integration, enhancement, managed services Ensure traceability of requirements from business needs and requirements, through testing and scope changes, to final solution Configure and document software and processes, using agreed standards and tools Create acceptance criteria and validate that solutions meet business needs through defining and coordinating testing Perform Unit, System Integration and E2E process testing for new enhancements, projects Perform or facilitate change management communication to the user community on future IT solution changes (ie raise change ticket) Guide business stakeholders to gain acceptance/sign-off What we're looking for Engg, Engg+MBA PriceFx Trained or certified Configuration Engineer PriceFx trained business user, data migration and integration engineer 5-10+ years of industry experience in PriceFx implementation, integration with at least 1-2 end to end implementation experience Excellent written and oral communication, stakeholder engagement
Coating Technician, Full-Time on-site in Leicestershire. Up to £29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development. To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process' and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies,' this will involve familiarity with quality plans, drawings, and sales orders. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
24/04/2024
Full time
Coating Technician, Full-Time on-site in Leicestershire. Up to £29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development. To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process' and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies,' this will involve familiarity with quality plans, drawings, and sales orders. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Engineering Lab Technician - Up to £32,000 per year with Bonus and 6% Pension Contributions. Flexible start finish times. As a Lab Technician you will work in our Test Laboratory which is located at our UK manufacturing plant in Parham, Suffolk. You will support the Research and Development team, working alongside the Product Designers, Application Engineers and Quality team, taking responsibility and ownership for the care and maintenance of the equipment in the test lab, as well as maintaining a clean and tidy work environment, preparing samples for mechanical and environmental testing, undertaking the tests and recording the results. To periodically audit and inspect the performance and attributes of finished products, both made by us and competing products. The role will report into the Director of Research and Development. In return we offer a salary in the range of £25,000 to £32,000 p.a., a discretionary bonus scheme as well as 25 days holiday (plus bank holidays). You will also receive a generous pension scheme, life assurance as well as the chance to take up other benefits including Health Insurance, cycle to work scheme, an employee assistance program, paid time off for volunteer work, plus many others. You will make an impact in the following way: You will be planning, setting up and undertaking controlled tests and trials in accordance with internal Belden Broadband Solutions and international standards. As well as development and management of test procedures and standards. To ensure that all tests and trials are recorded and reported accurately by documenting and presenting results and conclusions of all trials and experience to cross functional teams across Belden. Provide technical support on New Product Development projects. Manage or liaise with 3rd party test houses during outsourced testing. To carry out investigations in a methodical and controlled manner using root-cause investigation into quality issues. Including workmanship, assembly methods, mechanical design and non-conforming material. What you will bring: Experience of working in a manufacturing industry for +3 years is an advantage Experience working in a Test Lab environment within a team English, Mathematics and Sciences GCSEs or equivalent Preferably HNC or BEng Degree in a related discipline. Some physics as a minimum, to understand energy/force/mechanical/environmental aspects of testing. Need to have experience following set instructions/processes and be able to produce reports and collate information/data.
24/04/2024
Full time
Engineering Lab Technician - Up to £32,000 per year with Bonus and 6% Pension Contributions. Flexible start finish times. As a Lab Technician you will work in our Test Laboratory which is located at our UK manufacturing plant in Parham, Suffolk. You will support the Research and Development team, working alongside the Product Designers, Application Engineers and Quality team, taking responsibility and ownership for the care and maintenance of the equipment in the test lab, as well as maintaining a clean and tidy work environment, preparing samples for mechanical and environmental testing, undertaking the tests and recording the results. To periodically audit and inspect the performance and attributes of finished products, both made by us and competing products. The role will report into the Director of Research and Development. In return we offer a salary in the range of £25,000 to £32,000 p.a., a discretionary bonus scheme as well as 25 days holiday (plus bank holidays). You will also receive a generous pension scheme, life assurance as well as the chance to take up other benefits including Health Insurance, cycle to work scheme, an employee assistance program, paid time off for volunteer work, plus many others. You will make an impact in the following way: You will be planning, setting up and undertaking controlled tests and trials in accordance with internal Belden Broadband Solutions and international standards. As well as development and management of test procedures and standards. To ensure that all tests and trials are recorded and reported accurately by documenting and presenting results and conclusions of all trials and experience to cross functional teams across Belden. Provide technical support on New Product Development projects. Manage or liaise with 3rd party test houses during outsourced testing. To carry out investigations in a methodical and controlled manner using root-cause investigation into quality issues. Including workmanship, assembly methods, mechanical design and non-conforming material. What you will bring: Experience of working in a manufacturing industry for +3 years is an advantage Experience working in a Test Lab environment within a team English, Mathematics and Sciences GCSEs or equivalent Preferably HNC or BEng Degree in a related discipline. Some physics as a minimum, to understand energy/force/mechanical/environmental aspects of testing. Need to have experience following set instructions/processes and be able to produce reports and collate information/data.
We are looking for a summer intern working on an Engineering degree who will help with Manufacturing Engineering tasks. This is an immediate need for the summer. AGMET, LLC, is a well-established business located in Oakwood Village, Ohio. Agmet is a leading recycler of metal-bearing industrial waste by-products that are re-purposed back into industry. Learn more about us at Job Summary: We are seeking a person pursuing an Engineering degree who is looking for summer work from May to August or September. You will work in the office and at times in the plant, performing various support duties: - INPUT DATA/INFORMATION INTO LIMBLE - Help write maintenance procedures - Help write SOPs for various tasks - Develop instructions for outside contractors - Research/secure resources for rental equipment and supplies Qualifications: - Working toward a degree in Mechanical Engineering or related field - Mechanically inclined - Proficient with LIMBLE, WORD, some EXCEL - Familiarity with process engineering principles Job Type: Full-time Pay: $20.00 - $22.00 per hour Expected hours: 40 per week
24/04/2024
Full time
We are looking for a summer intern working on an Engineering degree who will help with Manufacturing Engineering tasks. This is an immediate need for the summer. AGMET, LLC, is a well-established business located in Oakwood Village, Ohio. Agmet is a leading recycler of metal-bearing industrial waste by-products that are re-purposed back into industry. Learn more about us at Job Summary: We are seeking a person pursuing an Engineering degree who is looking for summer work from May to August or September. You will work in the office and at times in the plant, performing various support duties: - INPUT DATA/INFORMATION INTO LIMBLE - Help write maintenance procedures - Help write SOPs for various tasks - Develop instructions for outside contractors - Research/secure resources for rental equipment and supplies Qualifications: - Working toward a degree in Mechanical Engineering or related field - Mechanically inclined - Proficient with LIMBLE, WORD, some EXCEL - Familiarity with process engineering principles Job Type: Full-time Pay: $20.00 - $22.00 per hour Expected hours: 40 per week
Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract We require a Robotics Engineer/Site Manager to deal with Industrial Scale Automation Sortation HardWare This is a very Data Driven role - Starting in Zaragoza but then Spanning across various EU sites (Expenses Covered) The scope would be: - Provide on-site support to Identify, analyze, optimize and resolve advanced robotics system issues. - Optimization tasks such as: parameter changes, mechanical alignments, sensor adjustments and air pressure regulation. - Partner with product development, manufacturing, and site-level reliability, maintenance, and engineering (RME) teams to maximize the performance of advanced robotics system. Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract
23/04/2024
Project-based
Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract We require a Robotics Engineer/Site Manager to deal with Industrial Scale Automation Sortation HardWare This is a very Data Driven role - Starting in Zaragoza but then Spanning across various EU sites (Expenses Covered) The scope would be: - Provide on-site support to Identify, analyze, optimize and resolve advanced robotics system issues. - Optimization tasks such as: parameter changes, mechanical alignments, sensor adjustments and air pressure regulation. - Partner with product development, manufacturing, and site-level reliability, maintenance, and engineering (RME) teams to maximize the performance of advanced robotics system. Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract
D365 Business Central Developer - Engineering sector - £60k - £75k My client are a manufacturing and engineering company who have a presence in UK and Europe with over 7 different entities encompassed under the parent group. They are looking to get all entities across to Business central and are at the start of their journey. With the UK and Irish entity on NAV 2016 and plans to move to Business central and the Swedish and Spanish moving across to Business central with go-live set for December 2024. They are looking for a BC Developer to work within the pre-existing systems team, developing end-to-end solutions and being the in-house technical specialist alongside the systems manager and group head of IT who are both strong NAV specialists. Key Responsibilities: Analyse the current system and assist with upgrading and migrating existing C/AL codebase to AL, ensuring compatibility and optimal performance. Collaborate with project team members, business analysts, and stakeholders to gather and document functional specifications and requirements for the upgrade project. Provide technical support, troubleshooting, and guidance to the project team throughout the upgrade process. Conduct unit testing, system integration testing, and assist in user acceptance testing (UAT) to ensure the quality and reliability of the upgraded system. Maintain and update system documentation, training materials, and best practices related to Business Central development. Ensure the integrity of the codebase for all Business Central Environments is upkept through Source control and diligent extension release management. Be the gatekeeper to all AL extensions across the company and ensure they are compliant with Change Management and Microsoft Upgrades. Would this role be of interest? Best Fergus
23/04/2024
Full time
D365 Business Central Developer - Engineering sector - £60k - £75k My client are a manufacturing and engineering company who have a presence in UK and Europe with over 7 different entities encompassed under the parent group. They are looking to get all entities across to Business central and are at the start of their journey. With the UK and Irish entity on NAV 2016 and plans to move to Business central and the Swedish and Spanish moving across to Business central with go-live set for December 2024. They are looking for a BC Developer to work within the pre-existing systems team, developing end-to-end solutions and being the in-house technical specialist alongside the systems manager and group head of IT who are both strong NAV specialists. Key Responsibilities: Analyse the current system and assist with upgrading and migrating existing C/AL codebase to AL, ensuring compatibility and optimal performance. Collaborate with project team members, business analysts, and stakeholders to gather and document functional specifications and requirements for the upgrade project. Provide technical support, troubleshooting, and guidance to the project team throughout the upgrade process. Conduct unit testing, system integration testing, and assist in user acceptance testing (UAT) to ensure the quality and reliability of the upgraded system. Maintain and update system documentation, training materials, and best practices related to Business Central development. Ensure the integrity of the codebase for all Business Central Environments is upkept through Source control and diligent extension release management. Be the gatekeeper to all AL extensions across the company and ensure they are compliant with Change Management and Microsoft Upgrades. Would this role be of interest? Best Fergus
Sheet Metal Worker/Welder Manchester About Our Client: Our Client is a long-established (40+ years) and growing family-run business specializing in sheet metal fabrication and welding. We offer a friendly, relaxed workplace environment focused on quality craftsmanship. Job Summary: We are seeking an experienced, skilled Sheet Metal Worker/Welder to join our team as a subcontractor. In this hands-on role, you will have the opportunity to work on a diverse range of projects and tackle new challenges daily across mild steel, stainless steel, and aluminium fabrication. Key Responsibilities: Read and interpret technical drawings, specifications, and manufacturing plans Perform MIG and TIG welding of thin plate mild steel and stainless steel components Operate CNC press brakes, Laser cutters, and other metalworking equipment Fabricate precise, high-quality metal parts, enclosures, frames, and assemblies Maintain clean and safe Workstation, adhering to health and safety protocols Requirements: Time-served background as a Sheet Metal Worker with proven welding experience Extensive MIG and TIG welding skills for mild steel and stainless steel (essential) Ability to read and work from technical drawings and manufacturing plans (critical) Experience operating CNC press brakes (preferred) Aluminium welding experience (preferred) Strong attention to detail and pride in delivering quality workmanship Reliable, punctual, and committed to meeting deadlines Working Hours: Monday-Thursday 7:30 AM - 4:15 PM, Friday 7:30 AM - 1:30 PM Compensation & Benefits: Competitive hourly rate of £16 - £18/hour Annual bonus based on company performance (approx. 2 weeks' pay) Occasional paid overtime at 1.5x rate (rare requirement) Join our skilled fabrication team at Our Client! If you are an experienced Sheet Metal Worker/Welder looking for an opportunity to showcase your talents, apply now.
23/04/2024
Project-based
Sheet Metal Worker/Welder Manchester About Our Client: Our Client is a long-established (40+ years) and growing family-run business specializing in sheet metal fabrication and welding. We offer a friendly, relaxed workplace environment focused on quality craftsmanship. Job Summary: We are seeking an experienced, skilled Sheet Metal Worker/Welder to join our team as a subcontractor. In this hands-on role, you will have the opportunity to work on a diverse range of projects and tackle new challenges daily across mild steel, stainless steel, and aluminium fabrication. Key Responsibilities: Read and interpret technical drawings, specifications, and manufacturing plans Perform MIG and TIG welding of thin plate mild steel and stainless steel components Operate CNC press brakes, Laser cutters, and other metalworking equipment Fabricate precise, high-quality metal parts, enclosures, frames, and assemblies Maintain clean and safe Workstation, adhering to health and safety protocols Requirements: Time-served background as a Sheet Metal Worker with proven welding experience Extensive MIG and TIG welding skills for mild steel and stainless steel (essential) Ability to read and work from technical drawings and manufacturing plans (critical) Experience operating CNC press brakes (preferred) Aluminium welding experience (preferred) Strong attention to detail and pride in delivering quality workmanship Reliable, punctual, and committed to meeting deadlines Working Hours: Monday-Thursday 7:30 AM - 4:15 PM, Friday 7:30 AM - 1:30 PM Compensation & Benefits: Competitive hourly rate of £16 - £18/hour Annual bonus based on company performance (approx. 2 weeks' pay) Occasional paid overtime at 1.5x rate (rare requirement) Join our skilled fabrication team at Our Client! If you are an experienced Sheet Metal Worker/Welder looking for an opportunity to showcase your talents, apply now.