The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
09/05/2024
Full time
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
Functional Safety Engineer - Staffordshire/hybrid up to £65,000. We have partnered up with an organisation who pride themselves on their digital transformation and operational technology, who are seeking to hire a Functional Safety Engineer to play a key part in the development, design and implementation of the safety and critical systems. The Functional Safety Engineer will benefit from a car allowance and work on a hybrid working model. Requirements of the Functional Safety Engineer: - MUST be eligible of British SC Clearance and UK Driving License - Proven experience in functional safety engineer or similar position. - Certification of functional safety - eg TÜV, FS Eng - Strong understanding of safety standards and regulations - eg ISO 13849, IEC 61508, 615511. - Ability to participate in CHAZOP, HAZOP and LOPA meetings. - Familiar with safety techniques - eg DFA, FTA and FMEA. - Natural Leader, team player and excellent communication skills. Responsibilities of the Functional Safety Engineer: - Work with stakeholders to make sure safety standards and requirements are aligned. - Provide leadership and training on safety activities completed by engineers. - To ensure function safety processes are followed through planning, assessments and reviews. - Collaborate with cross-functional teams to identify hazards, assess risks, and implement safety measures to mitigate potential risks. - Lead the development of safety analyses, concepts and requirements for the critical systems. - Supporting the various teams in delivering the C&I Functional Safety discipline and ensuring risks to operation of plant and equipment are assessed and mitigated. Functional Safety Engineer - Staffordshire/hybrid up to £65,000. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Dan Freeman , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
09/05/2024
Full time
Functional Safety Engineer - Staffordshire/hybrid up to £65,000. We have partnered up with an organisation who pride themselves on their digital transformation and operational technology, who are seeking to hire a Functional Safety Engineer to play a key part in the development, design and implementation of the safety and critical systems. The Functional Safety Engineer will benefit from a car allowance and work on a hybrid working model. Requirements of the Functional Safety Engineer: - MUST be eligible of British SC Clearance and UK Driving License - Proven experience in functional safety engineer or similar position. - Certification of functional safety - eg TÜV, FS Eng - Strong understanding of safety standards and regulations - eg ISO 13849, IEC 61508, 615511. - Ability to participate in CHAZOP, HAZOP and LOPA meetings. - Familiar with safety techniques - eg DFA, FTA and FMEA. - Natural Leader, team player and excellent communication skills. Responsibilities of the Functional Safety Engineer: - Work with stakeholders to make sure safety standards and requirements are aligned. - Provide leadership and training on safety activities completed by engineers. - To ensure function safety processes are followed through planning, assessments and reviews. - Collaborate with cross-functional teams to identify hazards, assess risks, and implement safety measures to mitigate potential risks. - Lead the development of safety analyses, concepts and requirements for the critical systems. - Supporting the various teams in delivering the C&I Functional Safety discipline and ensuring risks to operation of plant and equipment are assessed and mitigated. Functional Safety Engineer - Staffordshire/hybrid up to £65,000. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Dan Freeman , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Senior JavaScript Developer - Fully remote (£65k-£75k) This is an excellent opportunity to work on an already very successful SAAS product that helps support the health, safety and wellbeing of students and school staff across the UK. This fully-remote role can be filled from anywhere within the UK , is paying between £65k and £75k per annum. THE COMPANY: A SAAS company has delivered systems to help schools, businesses and venues comply with regulations, allowing them to go paperless whilst improving the safety of students, staff and parents whilst on their premises. Since their launch in 2015, they have grown to be a market leading company with a reputation for producing tried and tested products that are used by over 100,000 users across 2500 sites. Their success is greatly attributed to their drive to encourage staff to contribute their own ideas whilst working hard to deliver updates, new features and support to their users. As a business co-founded by Software Engineers, you can be sure that their systems are of top quality. THE ROLE: Working within a small, cohesive software engineering team, you will be leading initiatives to stabilise and optimise the existing system, participate in the standardisation of the databases, and work on new feature development such as stock control modules, SSO and the overhauling of the analysis and insights functionality. Following the continued expansion of the client base here in the UK, they will also be launching into new countries in 2025 which will bring with it a whole new set of projects and challenges. There will also be business-related development projects including CRM integration, supporting sales and customer success teams and maintaining integrations with APIs such as Airtable, Groupcall and Wonde. DUTIES: Lead and contribute to the end-to-end development of SaaS applications using JavaScript (Node.js, React or similar frameworks) Design and develop APIs with NoSQL and GraphQL, using best practices and with a keen eye on security. Collaborate with cross-functional teams, including stakeholders, product owners, designers, and other engineers, to deliver features and enhancements. Design and implement scalable and maintainable software architecture. Participate in architectural discussions and decisions Uphold high coding standards, conduct code reviews, and ensure best practices are followed. Work with our DevOps and QA engineers to ensure the speedy and reliable delivery of features and enhancements. Performance Optimization - Identify and address performance bottlenecks. Optimize code and queries for speed and efficiency. Propose and implement improvements to development processes and tools. Investigate and troubleshoot issues REQUIREMENTS: Proven experience as a Senior Software Engineer with a focus on JavaScript-based technologies. Strong proficiency in JavaScript, including Node.js and Front End frameworks like React or similar. Experience with RESTful API design and development. Experience with NoSQL and GraphQL. Solid understanding of software architecture and design patterns. Familiarity with cloud platforms (eg, AWS, Azure) and containerization (eg, Docker). Please note that this role is only open to candidates currently residing in the UK that have the necessary right to work. Interested? Contact Philip at Lorien Global IND_PC1 Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
08/05/2024
Full time
Senior JavaScript Developer - Fully remote (£65k-£75k) This is an excellent opportunity to work on an already very successful SAAS product that helps support the health, safety and wellbeing of students and school staff across the UK. This fully-remote role can be filled from anywhere within the UK , is paying between £65k and £75k per annum. THE COMPANY: A SAAS company has delivered systems to help schools, businesses and venues comply with regulations, allowing them to go paperless whilst improving the safety of students, staff and parents whilst on their premises. Since their launch in 2015, they have grown to be a market leading company with a reputation for producing tried and tested products that are used by over 100,000 users across 2500 sites. Their success is greatly attributed to their drive to encourage staff to contribute their own ideas whilst working hard to deliver updates, new features and support to their users. As a business co-founded by Software Engineers, you can be sure that their systems are of top quality. THE ROLE: Working within a small, cohesive software engineering team, you will be leading initiatives to stabilise and optimise the existing system, participate in the standardisation of the databases, and work on new feature development such as stock control modules, SSO and the overhauling of the analysis and insights functionality. Following the continued expansion of the client base here in the UK, they will also be launching into new countries in 2025 which will bring with it a whole new set of projects and challenges. There will also be business-related development projects including CRM integration, supporting sales and customer success teams and maintaining integrations with APIs such as Airtable, Groupcall and Wonde. DUTIES: Lead and contribute to the end-to-end development of SaaS applications using JavaScript (Node.js, React or similar frameworks) Design and develop APIs with NoSQL and GraphQL, using best practices and with a keen eye on security. Collaborate with cross-functional teams, including stakeholders, product owners, designers, and other engineers, to deliver features and enhancements. Design and implement scalable and maintainable software architecture. Participate in architectural discussions and decisions Uphold high coding standards, conduct code reviews, and ensure best practices are followed. Work with our DevOps and QA engineers to ensure the speedy and reliable delivery of features and enhancements. Performance Optimization - Identify and address performance bottlenecks. Optimize code and queries for speed and efficiency. Propose and implement improvements to development processes and tools. Investigate and troubleshoot issues REQUIREMENTS: Proven experience as a Senior Software Engineer with a focus on JavaScript-based technologies. Strong proficiency in JavaScript, including Node.js and Front End frameworks like React or similar. Experience with RESTful API design and development. Experience with NoSQL and GraphQL. Solid understanding of software architecture and design patterns. Familiarity with cloud platforms (eg, AWS, Azure) and containerization (eg, Docker). Please note that this role is only open to candidates currently residing in the UK that have the necessary right to work. Interested? Contact Philip at Lorien Global IND_PC1 Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Mission Systems Engineer Duration: 12 Months Location: Warton You will be part of the Mission Systems Delivery Team (MSDT) delivering the Assessment Phase of the Future Combat Air System (FCAS) programme. The team uses an agile work planning process to develop mission system concept options, architectures and designs for the various components of a future combat air system. Vacancies are available for systems architects and systems engineers in the following areas: Survivability Cockpit/HMI Stores Management Communications Navigation Sensors and Non-Kinetic Effects Electronic Warfare EM Interop Safety Health Management Mission Management On-board Computing Cyber Security Your main responsibilities will involve: You will get the opportunity to develop the next generation of mission systems across the engineering life cycle, from requirements through to design, development and implementation. The successful candidate could be expected to support the following activities for mission systems as part of a multi-functional engineering team: Concepting Architecting Requirements management Design Testing Safety Cyber Security Qualification and certification You will be positioned as and where needed on any of these activities. The role will also require you to: Support team meetings/DSUMs/Agile reviews Support the creation of Engineering documents that form part of the Systems Engineering process Responsibilities Knowledge of systems engineering methods and tools (eg UML/SysML, MoDAF, MOOD, Matlab) What we're looking for in you: Ability to work in a changing and evolving environment Innovative approach to problem solving Ability to work in a multi-partner/multi-national environment Holding a UK driving licence (or working towards obtaining one) Existing UK SC/DV clearance without caveats (or willingness to be put forward for these level of clearance as a condition of employment) Some of the following would be useful: Some experience of working in an agile environment Presentation skills
08/05/2024
Project-based
Mission Systems Engineer Duration: 12 Months Location: Warton You will be part of the Mission Systems Delivery Team (MSDT) delivering the Assessment Phase of the Future Combat Air System (FCAS) programme. The team uses an agile work planning process to develop mission system concept options, architectures and designs for the various components of a future combat air system. Vacancies are available for systems architects and systems engineers in the following areas: Survivability Cockpit/HMI Stores Management Communications Navigation Sensors and Non-Kinetic Effects Electronic Warfare EM Interop Safety Health Management Mission Management On-board Computing Cyber Security Your main responsibilities will involve: You will get the opportunity to develop the next generation of mission systems across the engineering life cycle, from requirements through to design, development and implementation. The successful candidate could be expected to support the following activities for mission systems as part of a multi-functional engineering team: Concepting Architecting Requirements management Design Testing Safety Cyber Security Qualification and certification You will be positioned as and where needed on any of these activities. The role will also require you to: Support team meetings/DSUMs/Agile reviews Support the creation of Engineering documents that form part of the Systems Engineering process Responsibilities Knowledge of systems engineering methods and tools (eg UML/SysML, MoDAF, MOOD, Matlab) What we're looking for in you: Ability to work in a changing and evolving environment Innovative approach to problem solving Ability to work in a multi-partner/multi-national environment Holding a UK driving licence (or working towards obtaining one) Existing UK SC/DV clearance without caveats (or willingness to be put forward for these level of clearance as a condition of employment) Some of the following would be useful: Some experience of working in an agile environment Presentation skills
Job Tittle: HV Engineer Role Type: Permanent, Full-time Salary: £45K - £56K basic per annum DOE Location: West London- onsite Shift Pattern: Continental Are you skilled in Mechanical and Electrical systems? Are you a problem-solver with a knack for keeping operations running smoothly? Our renowned client is looking for a highly skilled M&E Shift Technician to play a crucial role in maintaining their facility's functionality. Responsibilities: . Conduct routine inspections and maintenance of mechanical and electrical systems. . Respond promptly to equipment breakdowns and troubleshoot issues. . Perform repairs and replacements of faulty components. . Ensure compliance with safety regulations and company protocols. . Keep accurate records of maintenance activities and equipment status. . Collaborate with other team members to optimize performance and efficiency. Requirements: . Proven experience as an M&E Technician or similar role. . Strong knowledge of mechanical and electrical systems. . Proficiency in troubleshooting and repair techniques. . Ability to work independently and in a team. . Excellent communication skills. . Flexibility to work shifts, including nights and weekends. . Relevant technical qualifications or certifications are a plus. . Knowledge of HVAC, Coolers and Ventilation Systems (essential) How to Apply: If you are interested in this exciting opportunity, please apply today with your up-to-date CV. *The successful candidate will also need to complete background checks before joining* Thank you.
08/05/2024
Full time
Job Tittle: HV Engineer Role Type: Permanent, Full-time Salary: £45K - £56K basic per annum DOE Location: West London- onsite Shift Pattern: Continental Are you skilled in Mechanical and Electrical systems? Are you a problem-solver with a knack for keeping operations running smoothly? Our renowned client is looking for a highly skilled M&E Shift Technician to play a crucial role in maintaining their facility's functionality. Responsibilities: . Conduct routine inspections and maintenance of mechanical and electrical systems. . Respond promptly to equipment breakdowns and troubleshoot issues. . Perform repairs and replacements of faulty components. . Ensure compliance with safety regulations and company protocols. . Keep accurate records of maintenance activities and equipment status. . Collaborate with other team members to optimize performance and efficiency. Requirements: . Proven experience as an M&E Technician or similar role. . Strong knowledge of mechanical and electrical systems. . Proficiency in troubleshooting and repair techniques. . Ability to work independently and in a team. . Excellent communication skills. . Flexibility to work shifts, including nights and weekends. . Relevant technical qualifications or certifications are a plus. . Knowledge of HVAC, Coolers and Ventilation Systems (essential) How to Apply: If you are interested in this exciting opportunity, please apply today with your up-to-date CV. *The successful candidate will also need to complete background checks before joining* Thank you.
Systems Engineer Duration: 12 Months Location: Warton You will be part of the Mission Systems Delivery Team (MSDT) delivering the Assessment Phase of the Future Combat Air System (FCAS) programme. The team uses an agile work planning process to develop mission system concept options, architectures and designs for the various components of a future combat air system. Vacancies are available for systems architects and systems engineers in the following areas: Survivability Cockpit/HMI Stores Management Communications Navigation Sensors and Non-Kinetic Effects Electronic Warfare EM Interop Safety Health Management Mission Management On-board Computing Cyber Security Your main responsibilities will involve: You will get the opportunity to develop the next generation of mission systems across the engineering life cycle, from requirements through to design, development and implementation. The successful candidate could be expected to support the following activities for mission systems as part of a multi-functional engineering team: Concepting Architecting Requirements management Design Testing Safety Cyber Security Qualification and certification You will be positioned as and where needed on any of these activities. The role will also require you to: Support team meetings/DSUMs/Agile reviews Support the creation of Engineering documents that form part of the Systems Engineering process Responsibilities Knowledge of systems engineering methods and tools (eg UML/SysML, MoDAF, MOOD, Matlab) What we're looking for in you: Ability to work in a changing and evolving environment Innovative approach to problem solving Ability to work in a multi-partner/multi-national environment Some experience of working in an agile environment
08/05/2024
Project-based
Systems Engineer Duration: 12 Months Location: Warton You will be part of the Mission Systems Delivery Team (MSDT) delivering the Assessment Phase of the Future Combat Air System (FCAS) programme. The team uses an agile work planning process to develop mission system concept options, architectures and designs for the various components of a future combat air system. Vacancies are available for systems architects and systems engineers in the following areas: Survivability Cockpit/HMI Stores Management Communications Navigation Sensors and Non-Kinetic Effects Electronic Warfare EM Interop Safety Health Management Mission Management On-board Computing Cyber Security Your main responsibilities will involve: You will get the opportunity to develop the next generation of mission systems across the engineering life cycle, from requirements through to design, development and implementation. The successful candidate could be expected to support the following activities for mission systems as part of a multi-functional engineering team: Concepting Architecting Requirements management Design Testing Safety Cyber Security Qualification and certification You will be positioned as and where needed on any of these activities. The role will also require you to: Support team meetings/DSUMs/Agile reviews Support the creation of Engineering documents that form part of the Systems Engineering process Responsibilities Knowledge of systems engineering methods and tools (eg UML/SysML, MoDAF, MOOD, Matlab) What we're looking for in you: Ability to work in a changing and evolving environment Innovative approach to problem solving Ability to work in a multi-partner/multi-national environment Some experience of working in an agile environment
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
07/05/2024
Full time
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
06/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Position Available : Validation Engineer Location : Greater Manchester (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Validation Engineer Location : Greater Manchester (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Validation Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Validation Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of working in manufacturing engineering or process engineering within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Manufacturing Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Manufacturing Engineer Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £50,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Manufacturing Engineer Location : Bolton (1-2 days in office a week) Salary : Up to £52,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Manufacturing Engineer Location : Bolton (1-2 days in office a week) Salary : Up to £52,000 + Company Bonus & Very Good Pension Package Experience needed : We are looking for a manufacturing engineer or process engineer with experience of validating the quality of parts/products, who is able to transfer their skill set into validating our supply chain. The candidate would need to have experience of working within a complex engineering or manufacturing environment such as defence, aerospace, automotive, robotics and similar. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have a vacancy available as a Supply Chain Validation Engineer to join our team who are responsible for validating the external supply chain to ensure successful delivery of parts required to support development programmes in preparation for full rate production. The role will include the following: Handling a portfolio of suppliers on a day-to-day basis and handle the project Industrial Validation Plan Assess & validate the supply chain and suppliers' capability to meet our requirements Undertake Industrial Validation activities such as: Process FMEAs, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews in preparation for series production. Identify potential manufacturing & supply chain risks and put in place associated improvement and mitigation plans Handle & validate elements of manufacturing capability transfer from in house to supplier Collaborating and supporting a multi-functional team What we need from you: Skilled in manufacturing engineering with a solid understanding of manufacturing processes and techniques An appreciation for project delivery and project management Proficient in Industrial Validation tools such as: Process FMEAs, Measurement System Analysis, Process Mapping, Manufacturing Readiness Level (MRL) assessments, Production Readiness Reviews Excellent problem-solving skills to develop and implement root cause analysis and improvement plans within Supply Chain for manufacturing system deviations Capable of supporting suppliers/customers to ensure that they develop robust manufacturing systems and control plans Ideally, the applicant will have New Product Introduction (NPI) and/or manufacturing capability transfer experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : RF Systems Engineer Location : Bristol - Dynamic Working Hours Salary : Up to £63,000 + Paid Overtime, Company Bonus & Very Good Pension Package Experience needed : Experience in RF, DSP, Antenna & Modelling and experience being involved with the full product life cycle from research and concept development to system design, integration, verification and validation. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Designing and developing RF systems Participating in, or leading design reviews across the product life cycle. Coordinating the transition of development hardware into production, including environmental testing, qualification testing and design certification. System level functionality proving, Software/Firmware integration and proving. What we need from you: RF/Microwave systems knowledge Understanding of waveform design and implementation Requirements management and systems design Technical leadership of junior engineers System level RF modelling Antenna design and/or EM modelling Familiarity of Real Time Digital Signal Processing for high data bandwidth systems Systems modelling and Autocode generation experience If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!