NO SPONSORSHIP - NO CALLS FROM 3rd PARTIES PC TECHNICIAN Great soft skills because there is a lot of client interface Smarts & soft skills are everything Familiarity with SCCM is extremely helpful It's 100% desktop Start out at a six-month duration,but it can be renewed longer Project Tasks Image and configure end-user devices through MECM (SCCM) task sequence Deploy approved applications to endpoints through MECM Software Center Deliver and install endpoint devices and peripherals to end-user location Verify Workstation configuration and application functionality with end-user Troubleshoot any identified issues at the time of verification, or escalate to senior EUE team member Validate network printer installation Confirm presence of required mapped network drives Transfer local data where applicable Reclaim any replaced endpoint and peripherals to return to EUE inventory Communicate hardware deployment/reclaim with Asset Manager Skills Basic/Required Experience supporting Microsoft Windows 10 operating system Working knowledge of Microsoft 365 applications Ability to track and maintain hardware inventory (serial number/asset tag) to be communicated with Asset Manager Ability to lift equipment up to 30 lbs. (endpoint devices, peripherals) Preferred Experience supporting Microsoft Windows 11 operating system Experience with ServiceNow ITSM platform Experience with Microsoft Endpoint Configuration Manager (MECM) VACCINE REQUIRED Need a candidate to install and uninstall Software on 400 PC Laptops, desktops. All windows focused - 2-3 years experience
01/05/2024
Project-based
NO SPONSORSHIP - NO CALLS FROM 3rd PARTIES PC TECHNICIAN Great soft skills because there is a lot of client interface Smarts & soft skills are everything Familiarity with SCCM is extremely helpful It's 100% desktop Start out at a six-month duration,but it can be renewed longer Project Tasks Image and configure end-user devices through MECM (SCCM) task sequence Deploy approved applications to endpoints through MECM Software Center Deliver and install endpoint devices and peripherals to end-user location Verify Workstation configuration and application functionality with end-user Troubleshoot any identified issues at the time of verification, or escalate to senior EUE team member Validate network printer installation Confirm presence of required mapped network drives Transfer local data where applicable Reclaim any replaced endpoint and peripherals to return to EUE inventory Communicate hardware deployment/reclaim with Asset Manager Skills Basic/Required Experience supporting Microsoft Windows 10 operating system Working knowledge of Microsoft 365 applications Ability to track and maintain hardware inventory (serial number/asset tag) to be communicated with Asset Manager Ability to lift equipment up to 30 lbs. (endpoint devices, peripherals) Preferred Experience supporting Microsoft Windows 11 operating system Experience with ServiceNow ITSM platform Experience with Microsoft Endpoint Configuration Manager (MECM) VACCINE REQUIRED Need a candidate to install and uninstall Software on 400 PC Laptops, desktops. All windows focused - 2-3 years experience
AV Technician Events £24,000- £27,000 Based in Hull Events Technician: 1 year (required) Driving Licence (required) Benefits: Casual dress, Company events, Employee discount, Flexitime, Life insurance, On-site parking, Wellness programme, Brookwood is delighted to announce its partnership with this renowned events company. The primary function is to provide audio visual support across a range of events and to be accountable to all stakeholders for the delivery. What you will be doing: Operation of audio-visual equipment as allocated to provide the highest quality technical standard Positioning, installation, and operation of equipment within all event areas To liaise with clients and venue staff as required to fulfil the delivery of an event To assist with IT and network requirements for events as dictated by the customer Quick response to emergency/ad hoc requests To act as a 'responsible person' on-site when required and communicate any defects to the management team detailing the symptoms presented and the measures taken to overcome and resolve To support other technicians. To work in compliance with our H&S policies and company procedures at all times Have a positive attitude and be a great team player Who we are looking for Strong IT skills Works well in stressful circumstances and high-pressured environments with strict deadlines Proactive approach to solving problems Flexible approach to working hours (out of hours, weekends, bank holidays and working away from home included in the role) Comfortable with working at a height and alongside plant and access equipment Be able to understand and interpret technical plans and direction by senior members of the team and carry out those tasks to the expected level
01/05/2024
Full time
AV Technician Events £24,000- £27,000 Based in Hull Events Technician: 1 year (required) Driving Licence (required) Benefits: Casual dress, Company events, Employee discount, Flexitime, Life insurance, On-site parking, Wellness programme, Brookwood is delighted to announce its partnership with this renowned events company. The primary function is to provide audio visual support across a range of events and to be accountable to all stakeholders for the delivery. What you will be doing: Operation of audio-visual equipment as allocated to provide the highest quality technical standard Positioning, installation, and operation of equipment within all event areas To liaise with clients and venue staff as required to fulfil the delivery of an event To assist with IT and network requirements for events as dictated by the customer Quick response to emergency/ad hoc requests To act as a 'responsible person' on-site when required and communicate any defects to the management team detailing the symptoms presented and the measures taken to overcome and resolve To support other technicians. To work in compliance with our H&S policies and company procedures at all times Have a positive attitude and be a great team player Who we are looking for Strong IT skills Works well in stressful circumstances and high-pressured environments with strict deadlines Proactive approach to solving problems Flexible approach to working hours (out of hours, weekends, bank holidays and working away from home included in the role) Comfortable with working at a height and alongside plant and access equipment Be able to understand and interpret technical plans and direction by senior members of the team and carry out those tasks to the expected level
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to £29K (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations.To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities -Ability to measure and assess work on the appropriate spectrophotometers. -Ability to identify potential coating problems 'in process' and take appropriate corrective action. -Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. -Examine work prior to coating and be satisfied it is fit to coat. -Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. -Capable of stripping optics safely, observing Local Health and Safety rules. -Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. -Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. -Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities : -Qualifications in Mathematics and Physics at least to GCSE or A level -Computer literacy, including familiarity with Excel and Word -The ability to analyse situations and results -A good understanding of optical manufacture -A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
01/05/2024
Full time
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to £29K (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations.To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities -Ability to measure and assess work on the appropriate spectrophotometers. -Ability to identify potential coating problems 'in process' and take appropriate corrective action. -Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. -Examine work prior to coating and be satisfied it is fit to coat. -Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. -Capable of stripping optics safely, observing Local Health and Safety rules. -Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. -Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. -Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities : -Qualifications in Mathematics and Physics at least to GCSE or A level -Computer literacy, including familiarity with Excel and Word -The ability to analyse situations and results -A good understanding of optical manufacture -A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Mechanical Technician RAF Leeming - On-Site £34,500 Lynx are partnered with an organisation based at RAF Leeming to help them find several Mechanical Technicians to be based at RAF Leeming. You will have experience either maintaining and working on Flight Lines or Base equipment, working on aircraft systems or components such as Aircraft Ground Handling, Flight Servicings, Aircraft role changes, inspections & repairs. Requirements: - Provision of Part 145; meeting delivery targets and reporting any impact on Continuing Airworthiness - Document all completion of activities - Knowledge of the relevant Continuing Airworthiness Regulatory framework - 2+ years' experience in Base/Flight Line Maintenance If this role sounds of interest, please apply for this role.
01/05/2024
Full time
Mechanical Technician RAF Leeming - On-Site £34,500 Lynx are partnered with an organisation based at RAF Leeming to help them find several Mechanical Technicians to be based at RAF Leeming. You will have experience either maintaining and working on Flight Lines or Base equipment, working on aircraft systems or components such as Aircraft Ground Handling, Flight Servicings, Aircraft role changes, inspections & repairs. Requirements: - Provision of Part 145; meeting delivery targets and reporting any impact on Continuing Airworthiness - Document all completion of activities - Knowledge of the relevant Continuing Airworthiness Regulatory framework - 2+ years' experience in Base/Flight Line Maintenance If this role sounds of interest, please apply for this role.
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities : Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
29/04/2024
Full time
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities : Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
29/04/2024
Full time
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
29/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations.To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
26/04/2024
Full time
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations.To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations.To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities : Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
26/04/2024
Full time
Job description Coating Technician, Full-Time on-site in Leicestershire. Up to 29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations.To stay competitive within the current market and to assist in new product development.To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities : Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Field Engineer- English Speaking location Littau,Switzerland General aim of the position - Install/integrate and maintain telecommunication and infrastructure equipments in the wireless and Wireline networks within the assigned geographical area; - Daily travel to customers' network sites to perform tasks in the areas fulfilment, assurance and preventive maintenance; - Participate in oncall service rota. Main tasks Assurance - Follow troubleshooting procedures with the support from NOC and restore network services within the defined SLA; - Use the available tools and perform measurements to isolate and fix the faults; - Replace faulty equipment parts and perform functional tests to validate the troubleshooting results; - Implement temporary solutions whenever appropriate to help faster service restoration; - Log all actions and update the current status into the trouble ticketing tools; - Follow the spare part handling processes; - Support risk assessment activities when required; - Participate in 24x7 oncall rota. Fulfilment - Implement work orders, perform equipment installation, activation, site integration and testing within the defined SLA; - Record the implementation results into the corresponding tools, fill in service reports; - Activate the services and changes in the network together with NOC and/or customer DSS; - Notify and update NOC and/or customer DSS with the status of the changes during implementation; Preventive Maintenance - Perform preventive maintenance activities within the defined SLA; - Follow the preventive maintenance guidelines; - Perform site audits; - Resolve any issues and deficiencies found on site, including the ones discovered during site visits. - Support the Field Technician for complex tasks; - Member of project teams within Field Services. Required competencies - willingness to travel on a daily basis; - solid understanding of security and safety rules and standards; - not afraid to climb on masts and towers; - Education: recognised apprenticeship in the electrical or telecom area (eg electrician, electronician, multimedia technician, ) advanced education in telecom technologies (eg. telematician) is an advantage. Please send your CVS to: (see below)
26/04/2024
Full time
Field Engineer- English Speaking location Littau,Switzerland General aim of the position - Install/integrate and maintain telecommunication and infrastructure equipments in the wireless and Wireline networks within the assigned geographical area; - Daily travel to customers' network sites to perform tasks in the areas fulfilment, assurance and preventive maintenance; - Participate in oncall service rota. Main tasks Assurance - Follow troubleshooting procedures with the support from NOC and restore network services within the defined SLA; - Use the available tools and perform measurements to isolate and fix the faults; - Replace faulty equipment parts and perform functional tests to validate the troubleshooting results; - Implement temporary solutions whenever appropriate to help faster service restoration; - Log all actions and update the current status into the trouble ticketing tools; - Follow the spare part handling processes; - Support risk assessment activities when required; - Participate in 24x7 oncall rota. Fulfilment - Implement work orders, perform equipment installation, activation, site integration and testing within the defined SLA; - Record the implementation results into the corresponding tools, fill in service reports; - Activate the services and changes in the network together with NOC and/or customer DSS; - Notify and update NOC and/or customer DSS with the status of the changes during implementation; Preventive Maintenance - Perform preventive maintenance activities within the defined SLA; - Follow the preventive maintenance guidelines; - Perform site audits; - Resolve any issues and deficiencies found on site, including the ones discovered during site visits. - Support the Field Technician for complex tasks; - Member of project teams within Field Services. Required competencies - willingness to travel on a daily basis; - solid understanding of security and safety rules and standards; - not afraid to climb on masts and towers; - Education: recognised apprenticeship in the electrical or telecom area (eg electrician, electronician, multimedia technician, ) advanced education in telecom technologies (eg. telematician) is an advantage. Please send your CVS to: (see below)