People Source Consulting Ltd
Basingstoke, Hampshire
Role - Infrastructure Engineer (Windows) Location - Basingstoke Rate - £550 - £600pd (Inside IR35) Experis are looking for an experienced Windows Infrastructure Engineer, with a background of successful delivery in to UK Defence Clients to take on a 12 Month contract role in Basingstoke. Your role: We are looking for a infrastructure engineer to work as part of a multi skilled agile team, including security, service and management where teamwork is paramount. Your role will involve: The successful candidate will work as part of a multi skilled agile team, where teamwork is paramount. The role will be challenging and varied, where cross training is expected, and challenges shared. The successful candidate will have the responsibility of owning the delivery of a work package from design, through prototyping, ensuring the work package meets functional and non-functional requirements. The skills necessary to troubleshoot and problem solve. The candidate will script repeatable unit tests to exercise functionality, which will account for desired and undesired outcomes. The candidate will continue to support the work package through user piloting and into production and will continue to be on hand to provide early life support, as well as creating and maintaining support and design documentation to assist users and support personnel in maintaining the work package throughout its life. The candidate will be responsible for the delivery of ongoing change to the work package, in response to evolving user requirements. Your experience: Candidates must an advanced knowledge of Microsoft Windows systems administration within an enterprise environment - delivery of configuration change via GPO, Registry, Filesystem, Powershell cmdlets or, WMI, as well as Windows Update and patching mechanisms, including Windows Installer. In Return: £550 - £600pd (Inside IR35) Basingstoke Office Location (4 Day condensed week, considered for the right candidate) 12 Month Initial Contract Due to the nature of this work, candidates must have live, valid DV Clearance prior to starting work OR be eligible and will to undertake clearance. Work cannot start until clearance is Live. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
17/05/2024
Project-based
Role - Infrastructure Engineer (Windows) Location - Basingstoke Rate - £550 - £600pd (Inside IR35) Experis are looking for an experienced Windows Infrastructure Engineer, with a background of successful delivery in to UK Defence Clients to take on a 12 Month contract role in Basingstoke. Your role: We are looking for a infrastructure engineer to work as part of a multi skilled agile team, including security, service and management where teamwork is paramount. Your role will involve: The successful candidate will work as part of a multi skilled agile team, where teamwork is paramount. The role will be challenging and varied, where cross training is expected, and challenges shared. The successful candidate will have the responsibility of owning the delivery of a work package from design, through prototyping, ensuring the work package meets functional and non-functional requirements. The skills necessary to troubleshoot and problem solve. The candidate will script repeatable unit tests to exercise functionality, which will account for desired and undesired outcomes. The candidate will continue to support the work package through user piloting and into production and will continue to be on hand to provide early life support, as well as creating and maintaining support and design documentation to assist users and support personnel in maintaining the work package throughout its life. The candidate will be responsible for the delivery of ongoing change to the work package, in response to evolving user requirements. Your experience: Candidates must an advanced knowledge of Microsoft Windows systems administration within an enterprise environment - delivery of configuration change via GPO, Registry, Filesystem, Powershell cmdlets or, WMI, as well as Windows Update and patching mechanisms, including Windows Installer. In Return: £550 - £600pd (Inside IR35) Basingstoke Office Location (4 Day condensed week, considered for the right candidate) 12 Month Initial Contract Due to the nature of this work, candidates must have live, valid DV Clearance prior to starting work OR be eligible and will to undertake clearance. Work cannot start until clearance is Live. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Panels Structures Assembly Technician £23.82 per hour. Umbrella. Stevenage - 5 days onsite. Certain Advantage is hiring for a Panels Structures Assembly Technician based in Stevenage. This role is on a 6-month contract basis and is office based. Working within the operations team to consistently produce items which conform to all quality requirements in accordance with the production plan. Does this sound like your next career move? If you're ambitious to grow, this may be your next role. The role: Highlight any anomalies and second close non-conformances where applicable, and proactively liaise with the Team Leader/Engineering to update paper works to reflect build sequence and data capture requirements. To work in accordance with LDS (local document system) describing methods and procedures. Complying with standard processes, specific area requirements and health and safety requirements. Promote and follow Cleanroom regulations, local area health and safety requirements and 5S policy within local work areas Ability to read and work to shop floor documentation such as routings, drawing, work instructions and bills of material. Working to the required process standard as dictated by the relevant area skills Matrix. Responsible for the completion of all paperwork relating to the operations undertaken, including traceability stamps and recording any other additional information as required. Reporting and highlighting errors to ME where applicable. Taking progress and reporting to Lead Technician/Team Lead when required. The individual We are looking for people who can show: Previous experience such as Composite manufacturing, mechanical fitter, close tolerance sheet metal worker, time served mechanical technician. Ability to work from detailed drawings and electronic work instructions - within specific procedures. Experience in industries such as Space/Aerospace/Automotive/Motorsport etc. Ability to work in confined spaces above floor level (Working at height) Experience of working within a clean room environment and of being part of a team and leading activities. City and guilds qualification or Btech National Manual Dexterity Does this sound like your next career move? Apply today! (Reference: 73003) Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering.
17/05/2024
Project-based
Panels Structures Assembly Technician £23.82 per hour. Umbrella. Stevenage - 5 days onsite. Certain Advantage is hiring for a Panels Structures Assembly Technician based in Stevenage. This role is on a 6-month contract basis and is office based. Working within the operations team to consistently produce items which conform to all quality requirements in accordance with the production plan. Does this sound like your next career move? If you're ambitious to grow, this may be your next role. The role: Highlight any anomalies and second close non-conformances where applicable, and proactively liaise with the Team Leader/Engineering to update paper works to reflect build sequence and data capture requirements. To work in accordance with LDS (local document system) describing methods and procedures. Complying with standard processes, specific area requirements and health and safety requirements. Promote and follow Cleanroom regulations, local area health and safety requirements and 5S policy within local work areas Ability to read and work to shop floor documentation such as routings, drawing, work instructions and bills of material. Working to the required process standard as dictated by the relevant area skills Matrix. Responsible for the completion of all paperwork relating to the operations undertaken, including traceability stamps and recording any other additional information as required. Reporting and highlighting errors to ME where applicable. Taking progress and reporting to Lead Technician/Team Lead when required. The individual We are looking for people who can show: Previous experience such as Composite manufacturing, mechanical fitter, close tolerance sheet metal worker, time served mechanical technician. Ability to work from detailed drawings and electronic work instructions - within specific procedures. Experience in industries such as Space/Aerospace/Automotive/Motorsport etc. Ability to work in confined spaces above floor level (Working at height) Experience of working within a clean room environment and of being part of a team and leading activities. City and guilds qualification or Btech National Manual Dexterity Does this sound like your next career move? Apply today! (Reference: 73003) Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering.
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
17/05/2024
Full time
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
17/05/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
16/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
16/05/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
16/05/2024
Full time
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
16/05/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
15/05/2024
Full time
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
SC Cleared Assembly Technician £400 pd Inside IR35 Guildford (on site) * REQUIRES ACTIVE SC CLEARANCE* Overview: Here at Anson McCade we are working with the largest UK defence consultancy to recruit for an assembly technician to join on a contract basis. You will be involved with all aspects of the assembly and test of complex digital and analogue electronic products, working closely with a team of Manufacturing Engineers and Hardware Developers. You will work across all stages of the product life cycle including prototypes, productionisation, production and support, This role is 5 days a week on site. The skill set we are looking for: Any RF or DeBug experience Electronics background Experience with PCB's good Some soldering skills useful - IPC Qualification practical engineering experience working in a live electronics production environment Understanding of electronic principles, circuit diagrams, assembly drawings, BoMs and test specifications. Contract Details: Guildford 5 days on site £400 pd Inside IR35 3 month initial contract with view to extend. REQUIRES ACTIVE SC CLEARANCE
15/05/2024
Project-based
SC Cleared Assembly Technician £400 pd Inside IR35 Guildford (on site) * REQUIRES ACTIVE SC CLEARANCE* Overview: Here at Anson McCade we are working with the largest UK defence consultancy to recruit for an assembly technician to join on a contract basis. You will be involved with all aspects of the assembly and test of complex digital and analogue electronic products, working closely with a team of Manufacturing Engineers and Hardware Developers. You will work across all stages of the product life cycle including prototypes, productionisation, production and support, This role is 5 days a week on site. The skill set we are looking for: Any RF or DeBug experience Electronics background Experience with PCB's good Some soldering skills useful - IPC Qualification practical engineering experience working in a live electronics production environment Understanding of electronic principles, circuit diagrams, assembly drawings, BoMs and test specifications. Contract Details: Guildford 5 days on site £400 pd Inside IR35 3 month initial contract with view to extend. REQUIRES ACTIVE SC CLEARANCE
Manufacturing Sales, Business Development Switzerland, German speaker big OTE! Permanent Switzerland/flexible on location German speaking Consulting - Technology - Manufacturing. We are looking for people who will accompany our customers on their way into the digital future and actively support them in the challenges ahead. To be successful here, you need industry Manufacturing knowledge across the entire value chain from sales, development, production to assembly and service, as well as the necessary IT know-how, and the willingness to go the extra mile to achieve excellent performance together with the customer achieve Your area of responsibility includes: -You work in various roles on projects and develop excellent solutions for complex tasks together with our customers. -As a business consultant, you are in close contact with our customers and actively develop our customer base, discuss questions and derive tasks and projects from them with which we can support our customers. -Where necessary, you will provide technical support to our sales department in the various sales phases, from preparing an offer to concluding a contract. -Control and coordination of partners and service providers. -Development of new solution offerings depending on industry developments. -Developing customer campaigns with the support of our marketing department. Ideal experience -You have a completed degree in computer science, business informatics or a technical engineering course. -You have at least 8 years of professional experience in an industrial Manufacturing environment. -You have already worked as a project manager, business analyst, requirements engineer or in test management and are certified. -You are passionate about topics such as lean processes, variant management, digital production, IoT, predictive maintenance, etc., have the necessary expertise and are hungry for the latest trends in the industry. -You present complex ideas and solutions in an understandable and effective way. -You have no problems networking and cooperating with stakeholders across all hierarchy levels. -We require fluent German and good English skills. -Willingness to travel within Switzerland. If you are interested please apply with your most up to date CV Michael Bailey International is acting as an Employment Agency in relation to this vacancy.
13/05/2024
Full time
Manufacturing Sales, Business Development Switzerland, German speaker big OTE! Permanent Switzerland/flexible on location German speaking Consulting - Technology - Manufacturing. We are looking for people who will accompany our customers on their way into the digital future and actively support them in the challenges ahead. To be successful here, you need industry Manufacturing knowledge across the entire value chain from sales, development, production to assembly and service, as well as the necessary IT know-how, and the willingness to go the extra mile to achieve excellent performance together with the customer achieve Your area of responsibility includes: -You work in various roles on projects and develop excellent solutions for complex tasks together with our customers. -As a business consultant, you are in close contact with our customers and actively develop our customer base, discuss questions and derive tasks and projects from them with which we can support our customers. -Where necessary, you will provide technical support to our sales department in the various sales phases, from preparing an offer to concluding a contract. -Control and coordination of partners and service providers. -Development of new solution offerings depending on industry developments. -Developing customer campaigns with the support of our marketing department. Ideal experience -You have a completed degree in computer science, business informatics or a technical engineering course. -You have at least 8 years of professional experience in an industrial Manufacturing environment. -You have already worked as a project manager, business analyst, requirements engineer or in test management and are certified. -You are passionate about topics such as lean processes, variant management, digital production, IoT, predictive maintenance, etc., have the necessary expertise and are hungry for the latest trends in the industry. -You present complex ideas and solutions in an understandable and effective way. -You have no problems networking and cooperating with stakeholders across all hierarchy levels. -We require fluent German and good English skills. -Willingness to travel within Switzerland. If you are interested please apply with your most up to date CV Michael Bailey International is acting as an Employment Agency in relation to this vacancy.
Mes Author to work for a Pharmaceutical company The role is as follows Mes Author role Remote - There is a chance of 2 weeks onsite anywhere in the world (this will be fully expensed) Outside ir35 Rate - TBC 1 stage interview process next week Start - Late June/Early July 6 months contract Purpose: -To maintain the POMSnet environment; to author & maintain recipes & worksheets for API & DP manufacturing; and also author and maintain the recipes & BOMs in SAP. - To operate as a team member within the MES team in the implementation and maintenance of the MES & SAP system for the API & DP buildings. Responsibilities: Liaise with Manufacturing and Quality to close out MES execution exceptions. Troubleshoot and provide solutions for all MES & SAP problems in recipe execution and recipe authoring. Liaise with quality to provide approved documentation for all MES system changes. Design, create, write and execute system and test documentation to a high quality standard. Design, create, write and/or make all required changes to MES & SAP Recipes, worksheets, equipment and material spec's including phase transition logic to a high quality standard. Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures (CIs, CIRs, MIs, MIRs and SOPs) are aligned to MES processes and vice versa. Design, create, write and provide training for all other site personnel on their related MES roles. Participate in MES knowledge exchanges, MES Governance meetings, GMES Technical Review Board (TRB) Meetings, and manage issues, work-around and fixes identified. Work closely with IT regarding upgrades, patching, hardware support, security and system access. Liaise with GMES on Sligo required system improvements. Provide support to other MES system users as required to ensure business continuity. Participate in NPI projects from initiation to ensure MES system or hardware requirements are taken into consideration. Keep other recipe authors up to date on MES changes. Documentation of all activities in line with cGMP requirements. Cross training within the team and training of new team members. Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems. Adheres to and supports all EHS & E standards, procedures and policies. Supervision Received -The position will report directly to the Global process owner, - Goals are reviewed on a regular basis and formal performance reviews are carried out once per year. Supervision Provided - No direct reports. - Maintains regular contact with support functions on site. Qualifications: Diploma qualification in suitable science/engineering course and/or suitable experience. Job/Technical Skills A minimum of 5 years' experience in Batch processing operations in an FDA/HPRA regulated industry. Strong knowledge of cGMP and regulatory requirements relating to the pharmaceutical industry is required. Experience in the operating in a highly automated environment and safe handling of dangerous chemicals is required for this role. A good knowledge of IT systems/MES is required for this role. Cognitive/Business Skills The position requires a high level of attention to detail and mental concentration, to ensure total compliance with procedures at all times. The position requires proven problem solving skills, and the ability to adapt to new manufacturing process on a regular basis. The position requires proven technical skills, to ensure the person can cope with the technical demands of the position at all times. Requires innovative thinking, where new and untested solutions are proposed, demonstrated and implemented on a regular basis. Must be results driven striving to meet all targets and metric standards as set by site/department and division leaders. Requires total commitment to quality and maintaining a high standard of work at all times. Demonstrates the highest levels of integrity and a strong work ethic at all times. Strong communication skills both verbal and written are required for the execution of this role. Strong interpersonal skills are required. Understands and Supports the principles of Perfect Performance. Ownership/Accountability This position is responsible for ensuring the smooth running of the MES system and ensuring availability to manufacturing at all times. The position has a high level of autonomy and individuals are expected to work on their own initiative. Shows a high level of tenacity to ensure closure of issues. This position is crucial in maintaining the compliance of validated systems ensuring that any changes or modifications are documented and actioned. Demonstrates an ethos of Right First Time at all times. Adheres to and follows all procedures policies and guidelines ensuring compliance with cGMP and HPRA/FDA regulations and company policies, procedures and guidelines.
13/05/2024
Project-based
Mes Author to work for a Pharmaceutical company The role is as follows Mes Author role Remote - There is a chance of 2 weeks onsite anywhere in the world (this will be fully expensed) Outside ir35 Rate - TBC 1 stage interview process next week Start - Late June/Early July 6 months contract Purpose: -To maintain the POMSnet environment; to author & maintain recipes & worksheets for API & DP manufacturing; and also author and maintain the recipes & BOMs in SAP. - To operate as a team member within the MES team in the implementation and maintenance of the MES & SAP system for the API & DP buildings. Responsibilities: Liaise with Manufacturing and Quality to close out MES execution exceptions. Troubleshoot and provide solutions for all MES & SAP problems in recipe execution and recipe authoring. Liaise with quality to provide approved documentation for all MES system changes. Design, create, write and execute system and test documentation to a high quality standard. Design, create, write and/or make all required changes to MES & SAP Recipes, worksheets, equipment and material spec's including phase transition logic to a high quality standard. Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures (CIs, CIRs, MIs, MIRs and SOPs) are aligned to MES processes and vice versa. Design, create, write and provide training for all other site personnel on their related MES roles. Participate in MES knowledge exchanges, MES Governance meetings, GMES Technical Review Board (TRB) Meetings, and manage issues, work-around and fixes identified. Work closely with IT regarding upgrades, patching, hardware support, security and system access. Liaise with GMES on Sligo required system improvements. Provide support to other MES system users as required to ensure business continuity. Participate in NPI projects from initiation to ensure MES system or hardware requirements are taken into consideration. Keep other recipe authors up to date on MES changes. Documentation of all activities in line with cGMP requirements. Cross training within the team and training of new team members. Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems. Adheres to and supports all EHS & E standards, procedures and policies. Supervision Received -The position will report directly to the Global process owner, - Goals are reviewed on a regular basis and formal performance reviews are carried out once per year. Supervision Provided - No direct reports. - Maintains regular contact with support functions on site. Qualifications: Diploma qualification in suitable science/engineering course and/or suitable experience. Job/Technical Skills A minimum of 5 years' experience in Batch processing operations in an FDA/HPRA regulated industry. Strong knowledge of cGMP and regulatory requirements relating to the pharmaceutical industry is required. Experience in the operating in a highly automated environment and safe handling of dangerous chemicals is required for this role. A good knowledge of IT systems/MES is required for this role. Cognitive/Business Skills The position requires a high level of attention to detail and mental concentration, to ensure total compliance with procedures at all times. The position requires proven problem solving skills, and the ability to adapt to new manufacturing process on a regular basis. The position requires proven technical skills, to ensure the person can cope with the technical demands of the position at all times. Requires innovative thinking, where new and untested solutions are proposed, demonstrated and implemented on a regular basis. Must be results driven striving to meet all targets and metric standards as set by site/department and division leaders. Requires total commitment to quality and maintaining a high standard of work at all times. Demonstrates the highest levels of integrity and a strong work ethic at all times. Strong communication skills both verbal and written are required for the execution of this role. Strong interpersonal skills are required. Understands and Supports the principles of Perfect Performance. Ownership/Accountability This position is responsible for ensuring the smooth running of the MES system and ensuring availability to manufacturing at all times. The position has a high level of autonomy and individuals are expected to work on their own initiative. Shows a high level of tenacity to ensure closure of issues. This position is crucial in maintaining the compliance of validated systems ensuring that any changes or modifications are documented and actioned. Demonstrates an ethos of Right First Time at all times. Adheres to and follows all procedures policies and guidelines ensuring compliance with cGMP and HPRA/FDA regulations and company policies, procedures and guidelines.
Do you know your capacity planning from your forecasting? Would you like to be an integral part of an engineering company that have many different customer projects that need a strategic approach to ensure customer satisfaction? MPLOY are seeking an experienced planning all-rounder with manufacturing experience who can ensure that the company provide realistic expectations to their customers, and can plan for their ever growing new sales requirements. You ll be working as part of a team of circa 40 people at a busy SME that has been established for 20 years. They manufacture and refurbish industrial machinery for all types of different industries, meaning you will have variety in your workload, and lots of interesting projects to plan for and help deliver. You ll need to plan and schedule materials, co-ordinate and expedite material flow ensuring collaboration with business stakeholders to enhance processes, and ensure customer satisfaction. This will lead to achievement of On-Time Delivery (OTD), New Product Introduction (NPI), and Inventory targets. You ll need to enhance forecasting, and develop capacity planning strategies to ensure materials are available to satisfy the production schedule, including plenty of NPI Your expertise and planning work will ensure customer satisfaction reference lead times and delivery, while your stock management plans will support growth and prevent slow moving inventory. To be considered for this role, you ll need to display the following attributes: Supply chain experience MRP production planning, raw materials, production, and logistics. Communication skills -to enable effective negotiation and analysis of various situations/data Experience in a fast-moving manufacturing environment. Lean/JIT and/or Six-sigma experience, including root cause problem-solving. In return for your expertise and hard work you ll receive a good salary, access to an employee healthcare cash plan (WPA) with discounted membership for immediate family, plus access to discounted membership at selected health clubs/gyms. Working hours are Mon-Thu 07 30 (half hour lunch) and Fri: 07 30 (no lunch) 39 hours per week. Apply today every application receives a response
30/04/2024
Full time
Do you know your capacity planning from your forecasting? Would you like to be an integral part of an engineering company that have many different customer projects that need a strategic approach to ensure customer satisfaction? MPLOY are seeking an experienced planning all-rounder with manufacturing experience who can ensure that the company provide realistic expectations to their customers, and can plan for their ever growing new sales requirements. You ll be working as part of a team of circa 40 people at a busy SME that has been established for 20 years. They manufacture and refurbish industrial machinery for all types of different industries, meaning you will have variety in your workload, and lots of interesting projects to plan for and help deliver. You ll need to plan and schedule materials, co-ordinate and expedite material flow ensuring collaboration with business stakeholders to enhance processes, and ensure customer satisfaction. This will lead to achievement of On-Time Delivery (OTD), New Product Introduction (NPI), and Inventory targets. You ll need to enhance forecasting, and develop capacity planning strategies to ensure materials are available to satisfy the production schedule, including plenty of NPI Your expertise and planning work will ensure customer satisfaction reference lead times and delivery, while your stock management plans will support growth and prevent slow moving inventory. To be considered for this role, you ll need to display the following attributes: Supply chain experience MRP production planning, raw materials, production, and logistics. Communication skills -to enable effective negotiation and analysis of various situations/data Experience in a fast-moving manufacturing environment. Lean/JIT and/or Six-sigma experience, including root cause problem-solving. In return for your expertise and hard work you ll receive a good salary, access to an employee healthcare cash plan (WPA) with discounted membership for immediate family, plus access to discounted membership at selected health clubs/gyms. Working hours are Mon-Thu 07 30 (half hour lunch) and Fri: 07 30 (no lunch) 39 hours per week. Apply today every application receives a response