Job Title: Wireless Telemetry Engineer Location: Croydon Salary: £60,000 Start Date: 10/06/2024 Job Type: Permanent Job Responsibilities/Objectives You will support the designing and development of a new telemetry system including components such as data loggers and telemetry radios throughout the testing phase with a high level of input into the system design, field validation and deployment You will work with the other engineering and operational teams providing field support to ensure the telemetry systems meet the team's performance and reliability requirements, including assisting in the installing, commissioning, and operating the telemetry systems at events. You will maintain and support both the current telemetry system and the new system including troubleshooting etc You will be expected to troubleshoot and resolve telemetry system problems, including monitoring and analysing telemetry data to identify performance issues and areas for improvement. Required Skills/Experience The ideal candidate will have the following: Working with networking and serial protocols (eg, Ethernet, CAN, RS232); video encoding (eg, H264) and transmission protocols (eg, MPEG-TS); and RF systems Experience with electronics hardware and software and design principles Developing Linux Kernel drivers or for an RTOS Experience with data acquisition and analysis software Key areas of relevant skills include Python, C and Linux If you are interested in this opportunity, please apply now with your updated CV in Microsoft Word/PDF format. Disclaimer Notwithstanding any guidelines given to level of experience sought, we will consider candidates from outside this range if they can demonstrate the necessary competencies. Square One is acting as both an employment agency and an employment business, and is an equal opportunities recruitment business. Square One embraces diversity and will treat everyone equally. Please see our website for our full diversity statement.
07/05/2024
Full time
Job Title: Wireless Telemetry Engineer Location: Croydon Salary: £60,000 Start Date: 10/06/2024 Job Type: Permanent Job Responsibilities/Objectives You will support the designing and development of a new telemetry system including components such as data loggers and telemetry radios throughout the testing phase with a high level of input into the system design, field validation and deployment You will work with the other engineering and operational teams providing field support to ensure the telemetry systems meet the team's performance and reliability requirements, including assisting in the installing, commissioning, and operating the telemetry systems at events. You will maintain and support both the current telemetry system and the new system including troubleshooting etc You will be expected to troubleshoot and resolve telemetry system problems, including monitoring and analysing telemetry data to identify performance issues and areas for improvement. Required Skills/Experience The ideal candidate will have the following: Working with networking and serial protocols (eg, Ethernet, CAN, RS232); video encoding (eg, H264) and transmission protocols (eg, MPEG-TS); and RF systems Experience with electronics hardware and software and design principles Developing Linux Kernel drivers or for an RTOS Experience with data acquisition and analysis software Key areas of relevant skills include Python, C and Linux If you are interested in this opportunity, please apply now with your updated CV in Microsoft Word/PDF format. Disclaimer Notwithstanding any guidelines given to level of experience sought, we will consider candidates from outside this range if they can demonstrate the necessary competencies. Square One is acting as both an employment agency and an employment business, and is an equal opportunities recruitment business. Square One embraces diversity and will treat everyone equally. Please see our website for our full diversity statement.
A global medical device company are looking for an Electrical Engineer to join their Engineering team on a contract basis. Your role will be to design and build test systems. The role will include wide breadth of activities within. From understanding product stand point to testing the product with the sub assembly to building an automated production system. Working knowledge of piezos is essential. Essential skills: Broad understanding of electrical or electronic systems Understanding of components and sensors Working knowledge piezos Adaptability Desirable skills: Medical device or other regulated industry experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
07/05/2024
Project-based
A global medical device company are looking for an Electrical Engineer to join their Engineering team on a contract basis. Your role will be to design and build test systems. The role will include wide breadth of activities within. From understanding product stand point to testing the product with the sub assembly to building an automated production system. Working knowledge of piezos is essential. Essential skills: Broad understanding of electrical or electronic systems Understanding of components and sensors Working knowledge piezos Adaptability Desirable skills: Medical device or other regulated industry experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Senior Connectivity Firmware/Test Engineer 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
07/05/2024
Project-based
Senior Connectivity Firmware/Test Engineer 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
People Source Consulting Ltd
Cambridge, Cambridgeshire
Hiring: Electro-Mechanical Engineer Location: Cambridge Start date: ASAP Salary: competitive Our client is providing state-of-art process technologies and device solutions to revolutionise the electronics industry. They are looking for a skilled Equipment Engineer to be the main point of contact for all aspects related to equipment in the company. We are welcoming applicants with experience working with semiconductor equipment to join their multi-disciplinary team. This is an important role in their fast-growing company to allow smooth R&D and production work and to revolutionise the future. Required skills: Hands on experience as equipment engineer in chemical/semiconductor manufacturing environment (wet etch equipment will be advantage) Understanding of electronic and mechanical principles Proven problem-solving skills Good communication skills, both in writing and verbally Degree/HND in scientific/Engineering discipline or F.E Qualification OR equivalent experience Experience in maintaining equipment Strong training skills and technical familiarity with product and equipment Fluid dynamics or thermal modelling experiences preferred Fork lift license desirable Key Responsibilities: Develop and upgrade cleanroom environment and facilities to allow R&D and production work Perform equipment upgrade from proof-of-concept (eg drawing) to execution Analyse equipment breakdowns and develop corrective actions accordingly Sustain continuous improvement to enhance equipment reliability and scalability Develop preventive maintenance procedures to reduce equipment breakdowns Develop troubleshooting procedures to reduce machine downtime Setup and commission new equipment Carry out equipment and the facility systems maintenance to allow minimal interruption to production Upgrade the cleanroom environment to allow effective production process Benefits include health insurance, dental insurance, pension plan and more. How To Apply Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
07/05/2024
Full time
Hiring: Electro-Mechanical Engineer Location: Cambridge Start date: ASAP Salary: competitive Our client is providing state-of-art process technologies and device solutions to revolutionise the electronics industry. They are looking for a skilled Equipment Engineer to be the main point of contact for all aspects related to equipment in the company. We are welcoming applicants with experience working with semiconductor equipment to join their multi-disciplinary team. This is an important role in their fast-growing company to allow smooth R&D and production work and to revolutionise the future. Required skills: Hands on experience as equipment engineer in chemical/semiconductor manufacturing environment (wet etch equipment will be advantage) Understanding of electronic and mechanical principles Proven problem-solving skills Good communication skills, both in writing and verbally Degree/HND in scientific/Engineering discipline or F.E Qualification OR equivalent experience Experience in maintaining equipment Strong training skills and technical familiarity with product and equipment Fluid dynamics or thermal modelling experiences preferred Fork lift license desirable Key Responsibilities: Develop and upgrade cleanroom environment and facilities to allow R&D and production work Perform equipment upgrade from proof-of-concept (eg drawing) to execution Analyse equipment breakdowns and develop corrective actions accordingly Sustain continuous improvement to enhance equipment reliability and scalability Develop preventive maintenance procedures to reduce equipment breakdowns Develop troubleshooting procedures to reduce machine downtime Setup and commission new equipment Carry out equipment and the facility systems maintenance to allow minimal interruption to production Upgrade the cleanroom environment to allow effective production process Benefits include health insurance, dental insurance, pension plan and more. How To Apply Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
07/05/2024
Full time
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
07/05/2024
Full time
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
07/05/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
07/05/2024
Full time
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
07/05/2024
Full time
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
06/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
06/05/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
04/05/2024
Full time
Overview Reporting to the Process Engineering Manager, the Production Support Engineer is responsible for ensuring optimal OEE (Overall Equipment Effectiveness), through effective preventative maintenance and corrective actions to reduce equipment down time, in line with the expectations of Operations. Additionally, providing engineering support to Operations and ensuring continuous improvement. The successful candidate will join the Process Engineering team, reporting to the Process Engineering Manager. This team is comprised of 4 employees. Experience: Electronics: Candidate will have detailed knowledge of repair fault finding and minor design. Manufacturing: The candidate has previously worked in a high-precision electronics manufacturing environment supporting and repairing equipment and systems. IT skills: Computer literate; with experience of using Microsoft windows software to complete work done reports and monitor equipment usage (i.e. word, excel etc.) Continuous improvement and Problem- Solving: Candidates will be familiar with making improvements to equipment / systems and services to improve utilisation and operational/production productivity and throughput. You will be familiar of the creation and implementation of lean working processes and able to demonstrate a structured approach to problem-solving, root-cause analysis. Ability to construct an FMEA would be highly desirable Documentation: The candidate has the ability to interpret drawings, specifications, work instructions and create new ones if required. Maintenance of Equipment: You will be able to demonstrate their ability to support and repair equipment and systems. Mechanical Exposure: Have worked in an environment with some mechanical requirement (assembling items etc). ERP Systems: Exposure to ERP systems. Manufacturing: Experience in electronic instrumentation. Overall Equipment Effectiveness (OEE): Able to track and monitor equipment utilisation and reliability to identify preventative maintenance measures to improve reliability and up-time. Understand measuring equipment operation and ensuring optimal overall equipment effectiveness. H&S: Knowledge of Health and Safety at work. Education: HNC or above in electronics, we will consider candidates who are qualified by experience. Normal hours of work will be 08:00 - 16:15 Monday to Thursday, 08:00 - 15;00 on Friday with half an hour for lunch. This role is not hybrid Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Overview The role of Application Engineer is to develop engineering solutions using company products or board sets to meet customer needs. The role involves all aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires in-depth understanding of the functionality and use of the company's products and board sets and how to adapt them for new applications. It requires international travel. Duties and responsibilities Investigate requests for the development of solutions to meet customer applications, originating from customers or internally from Product Management. Undertake investigative / feasibility work to develop solutions. Plan and cost projects; provide information to Sales for quotation. Develop application solutions through developing new hardware and software, configuring products, and integrating 3rd party products. Test and maintain hardware and software, including release process, version control, and bug management. Write and maintain documentation for designs to describe functionality, use and reasons for design decisions. Perform acceptance testing of application solutions to verify correct operation, prior to release to the market. Resolve any issues found before providing to customers. Manage projects and work as a team member on projects; plan, track and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with people inside and outside the company, and coordinate other departments involved (such as R&D) to successfully achieve outcomes and results. Use company procedures, processes, and consistent styles. Write, issue and update hardware and software documentation; adhere to coding standards when developing software. Maintain traceability, update documentation, use version control for all document changes. Provide expert help for the Support team to help address customer problems with the use of solutions developed by Application Engineering. Capture and communicate ideas and technical information on solutions, their performance and application, verbally and in written technical documentation, and provide internally (Marketing, Sales) and externally to customers and Representatives. Write technical articles and application notes for customers and for publication. Support promotion of company application engineering capability at industry exhibitions. Manage customer relationship for application engineering projects: Build and maintain a strong working relationship with the customer to understand their needs and communicate that within the company. Experience: Embedded Firmware Development : Can develop real-time embedded firmware in C/C++ covering the full design life cycle; Has working experience with firmware release process, version control, and bug management. Hardware Development: Working experience with schematic capture, building and debugging circuits; Can use standard electronics principles to prove robustness of designs. Electronics Knowledge: Good design knowledge of digital and analogue electronics, and software design using C/C++. Project Management: Able to demonstrate successful outcomes on working on a project either autonomously or as part of a larger team; Experience working within an agile, continuous delivery environment. Procedures and Processes : Appreciates the benefits of working to defined processes; Prior contact using systems for software version control, issue tracking, planning would be a benefit, with an emphasis on using these tools to collaborate in a smooth fashion. Tools and Technologies: Able to specify, install, use and maintain tools and technologies (e.g. development environments) needed for software development. Education: Minimum of a 2:1 degree in a relevant field (for example, but not limited to, mechatronics, electronics, AI, robotics). This would ideally suit someone looking to move into their second job, but graduates would be considered. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
04/05/2024
Full time
Overview The role of Application Engineer is to develop engineering solutions using company products or board sets to meet customer needs. The role involves all aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires in-depth understanding of the functionality and use of the company's products and board sets and how to adapt them for new applications. It requires international travel. Duties and responsibilities Investigate requests for the development of solutions to meet customer applications, originating from customers or internally from Product Management. Undertake investigative / feasibility work to develop solutions. Plan and cost projects; provide information to Sales for quotation. Develop application solutions through developing new hardware and software, configuring products, and integrating 3rd party products. Test and maintain hardware and software, including release process, version control, and bug management. Write and maintain documentation for designs to describe functionality, use and reasons for design decisions. Perform acceptance testing of application solutions to verify correct operation, prior to release to the market. Resolve any issues found before providing to customers. Manage projects and work as a team member on projects; plan, track and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with people inside and outside the company, and coordinate other departments involved (such as R&D) to successfully achieve outcomes and results. Use company procedures, processes, and consistent styles. Write, issue and update hardware and software documentation; adhere to coding standards when developing software. Maintain traceability, update documentation, use version control for all document changes. Provide expert help for the Support team to help address customer problems with the use of solutions developed by Application Engineering. Capture and communicate ideas and technical information on solutions, their performance and application, verbally and in written technical documentation, and provide internally (Marketing, Sales) and externally to customers and Representatives. Write technical articles and application notes for customers and for publication. Support promotion of company application engineering capability at industry exhibitions. Manage customer relationship for application engineering projects: Build and maintain a strong working relationship with the customer to understand their needs and communicate that within the company. Experience: Embedded Firmware Development : Can develop real-time embedded firmware in C/C++ covering the full design life cycle; Has working experience with firmware release process, version control, and bug management. Hardware Development: Working experience with schematic capture, building and debugging circuits; Can use standard electronics principles to prove robustness of designs. Electronics Knowledge: Good design knowledge of digital and analogue electronics, and software design using C/C++. Project Management: Able to demonstrate successful outcomes on working on a project either autonomously or as part of a larger team; Experience working within an agile, continuous delivery environment. Procedures and Processes : Appreciates the benefits of working to defined processes; Prior contact using systems for software version control, issue tracking, planning would be a benefit, with an emphasis on using these tools to collaborate in a smooth fashion. Tools and Technologies: Able to specify, install, use and maintain tools and technologies (e.g. development environments) needed for software development. Education: Minimum of a 2:1 degree in a relevant field (for example, but not limited to, mechatronics, electronics, AI, robotics). This would ideally suit someone looking to move into their second job, but graduates would be considered. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Position Available : Navigation Sensors Engineer Location : Bristol (Hybrid) & Dynamic Working Hours Salary : Up to £45,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Understanding of navigation sensor technologies in a defence environment, appreciation of systems design, and working to good engineering practices. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Navigation Sensors Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Navigation Sensors Engineer Location : Bristol (Hybrid) & Dynamic Working Hours Salary : Up to £45,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Understanding of navigation sensor technologies in a defence environment, appreciation of systems design, and working to good engineering practices. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Navigation Sensors Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
SAP APO Functional Expert (m/f/d) with Languages English Westhouse is one of the leading international recruitment agencies for the procurement of highly qualified experts in fields such as IT life cycle management, SAP, engineering, commerce and specialist consultancy. For our client we are currently looking for a SAP APO Functional Expert (m/f/d) General information Reference: 168123 Location: Remote Start: 01.05.2024/ASAP Volume: Full time 100% Duration: 6 months Languages: English Your Skills - Bachelor's degree in Computer Science, Information Systems, or related field. - Extensive experience (5+ years) in systems integration, particularly with SAP systems (APO and ECC). - Proficiency in configuring and managing SAP BW within APO. - Strong understanding of Process Chains, Heuristics, Deployment, and Optimizer functionalities within SAP APO. - Experience with CIF integration establishment and fine-tuning. - Excellent communication and collaboration skills to work effectively with cross-functional teams. - Attention to detail and problem-solving abilities. - SAP certification (desired but not mandatory). Your Tasks - Coordinate the integration of the new APO instance with NSA systems, liaising with relevant teams to ensure alignment and smooth data exchange. - Utilize configuration and data object management skills to support the relevant area, whether it be Demand Planning (DP) or Supply Network Planning (SNP), according to the role. - Configure and adjust BW within APO, supporting the data transfer from APO BW to a separate BI instance. - Demonstrate expertise in Process Chains for both DP and SNP, and set up/maintain process-related jobs for specific selections. - Possess knowledge of SNP Heuristics, Deployment, and Optimizer functionalities. - Manage CIF integration establishment from the new ECC to the new APO instance, with an additional focus on fine-tuning existing CIF usage where applicable. - Understand DP-specific data and process structures, including Macros, Data Structure (PA/Pbook/Pview), Forecast Release, FC upload from info cubes, and data loads to PA. Interested? We look forward to receiving your application documents in electronic form.
03/05/2024
Project-based
SAP APO Functional Expert (m/f/d) with Languages English Westhouse is one of the leading international recruitment agencies for the procurement of highly qualified experts in fields such as IT life cycle management, SAP, engineering, commerce and specialist consultancy. For our client we are currently looking for a SAP APO Functional Expert (m/f/d) General information Reference: 168123 Location: Remote Start: 01.05.2024/ASAP Volume: Full time 100% Duration: 6 months Languages: English Your Skills - Bachelor's degree in Computer Science, Information Systems, or related field. - Extensive experience (5+ years) in systems integration, particularly with SAP systems (APO and ECC). - Proficiency in configuring and managing SAP BW within APO. - Strong understanding of Process Chains, Heuristics, Deployment, and Optimizer functionalities within SAP APO. - Experience with CIF integration establishment and fine-tuning. - Excellent communication and collaboration skills to work effectively with cross-functional teams. - Attention to detail and problem-solving abilities. - SAP certification (desired but not mandatory). Your Tasks - Coordinate the integration of the new APO instance with NSA systems, liaising with relevant teams to ensure alignment and smooth data exchange. - Utilize configuration and data object management skills to support the relevant area, whether it be Demand Planning (DP) or Supply Network Planning (SNP), according to the role. - Configure and adjust BW within APO, supporting the data transfer from APO BW to a separate BI instance. - Demonstrate expertise in Process Chains for both DP and SNP, and set up/maintain process-related jobs for specific selections. - Possess knowledge of SNP Heuristics, Deployment, and Optimizer functionalities. - Manage CIF integration establishment from the new ECC to the new APO instance, with an additional focus on fine-tuning existing CIF usage where applicable. - Understand DP-specific data and process structures, including Macros, Data Structure (PA/Pbook/Pview), Forecast Release, FC upload from info cubes, and data loads to PA. Interested? We look forward to receiving your application documents in electronic form.
Role: Head of engineering/product lead Salary: £70,000 - £75,000 approximately really depends on skills and experience Location: Dundee Onsite 3x days per week My client is looking for a head of engineering product lead. Will be responsible for taking small physical products to market in the electronics and mechanical sector in a harsh environment. You will need to deal with the manufactures and understand how the physical product is manufactured and understand the quality standards. If you have gone to field with a product this will be a huge advantage as you may need to re-engineer a product and complete root cause analysis and DFMA. Role description and purpose The Head of Product is a critical role. Its purpose is to deliver innovation pipeline; organising, supporting, mentoring and managing a group of dedicated professionals to deliver a series of new propositions that will contribute towards our ambition to deliver integrated solutions that support smart farming and processing operations. We have several propositions in development including a biomass camera, a sea-lice treatment system, a seal detection camera, a novel pump and a waterjet bleeder. These propositions are at various stages of development but share the need to be driven through development to deliver manufacturing ready outcomes. Delivery of these outcomes is critical to our ambition to become a leading provider of value-adding solutions to customers throughout the world. The range of activity to be overseen by the Head of Product extends from verification of market need, through prototyping, to the development and documentation of specifications for manufacturing. Development leadership requires an understanding of the constituent elements of each proposition, including software, electronics, mechanical and power engineering. As well as a capable in-house development team, we have an established network of partners within its supply chain that can be tapped to introduce additional capability and capacity. This role will require significant contact with all members of the senior management team and reports to the Chief Operating Officer. Responsibilities of the role Provide leadership to the company's product team and to those within the supply chain involved in supporting the development of products Support the continuous development of the product team, ensuring that skills and capacity are aligned with the delivery objectives from this business unit Plan for and implement a process that achieves the transition of knowledge and capability from the more experienced members of the product team to new employees Actively manage the relationship between and our 3rd party manufacturing units, to ensure quality and timely delivery. Focusing on the documentation, design artifacts and quality reporting. Liaise with marketing department (and third parties as required) to gather intelligence on customer requirements and case studies Own responsibility for delivering next generation propositions Support the transfer of new proposition designs to manufacturing business unit, to include the provision of all documentation required to build and safely operate the equipment Schedule and define draft budgets for the activities of the product team Maintain an up to date understanding of the regulatory environments within which operates and ensure that new product designs do not breach regulations Promote a culture of health and safety Define OKRs relevant to the role, agree goals with the COO, and deliver Provide periodical reports to the COO on progress against OKRs Experience & Skills: Relevant degree with an engineering background and prior experience of owning the delivery of new value propositions within a fast moving SME environment Ability to effectively work on the delivery of multiple new propositions simultaneously Ability to apply business knowledge to real-world scenarios Leadership capability and effective people manager Planning and management skills Strategic thinker capable of making a meaningful contribution to the direction of the business Problem solving skills and analytical mindset Understanding of budgeting process and financial management Excellent communication skills Pro-active and self-starting Ability to assimilate detailed product knowledge and to disseminate this within the team and to third party supporters as required Presentation capability: written and verbal Technical competencies: Project & task management People management Facilitation & change management Strategic leadership How To Apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
03/05/2024
Full time
Role: Head of engineering/product lead Salary: £70,000 - £75,000 approximately really depends on skills and experience Location: Dundee Onsite 3x days per week My client is looking for a head of engineering product lead. Will be responsible for taking small physical products to market in the electronics and mechanical sector in a harsh environment. You will need to deal with the manufactures and understand how the physical product is manufactured and understand the quality standards. If you have gone to field with a product this will be a huge advantage as you may need to re-engineer a product and complete root cause analysis and DFMA. Role description and purpose The Head of Product is a critical role. Its purpose is to deliver innovation pipeline; organising, supporting, mentoring and managing a group of dedicated professionals to deliver a series of new propositions that will contribute towards our ambition to deliver integrated solutions that support smart farming and processing operations. We have several propositions in development including a biomass camera, a sea-lice treatment system, a seal detection camera, a novel pump and a waterjet bleeder. These propositions are at various stages of development but share the need to be driven through development to deliver manufacturing ready outcomes. Delivery of these outcomes is critical to our ambition to become a leading provider of value-adding solutions to customers throughout the world. The range of activity to be overseen by the Head of Product extends from verification of market need, through prototyping, to the development and documentation of specifications for manufacturing. Development leadership requires an understanding of the constituent elements of each proposition, including software, electronics, mechanical and power engineering. As well as a capable in-house development team, we have an established network of partners within its supply chain that can be tapped to introduce additional capability and capacity. This role will require significant contact with all members of the senior management team and reports to the Chief Operating Officer. Responsibilities of the role Provide leadership to the company's product team and to those within the supply chain involved in supporting the development of products Support the continuous development of the product team, ensuring that skills and capacity are aligned with the delivery objectives from this business unit Plan for and implement a process that achieves the transition of knowledge and capability from the more experienced members of the product team to new employees Actively manage the relationship between and our 3rd party manufacturing units, to ensure quality and timely delivery. Focusing on the documentation, design artifacts and quality reporting. Liaise with marketing department (and third parties as required) to gather intelligence on customer requirements and case studies Own responsibility for delivering next generation propositions Support the transfer of new proposition designs to manufacturing business unit, to include the provision of all documentation required to build and safely operate the equipment Schedule and define draft budgets for the activities of the product team Maintain an up to date understanding of the regulatory environments within which operates and ensure that new product designs do not breach regulations Promote a culture of health and safety Define OKRs relevant to the role, agree goals with the COO, and deliver Provide periodical reports to the COO on progress against OKRs Experience & Skills: Relevant degree with an engineering background and prior experience of owning the delivery of new value propositions within a fast moving SME environment Ability to effectively work on the delivery of multiple new propositions simultaneously Ability to apply business knowledge to real-world scenarios Leadership capability and effective people manager Planning and management skills Strategic thinker capable of making a meaningful contribution to the direction of the business Problem solving skills and analytical mindset Understanding of budgeting process and financial management Excellent communication skills Pro-active and self-starting Ability to assimilate detailed product knowledge and to disseminate this within the team and to third party supporters as required Presentation capability: written and verbal Technical competencies: Project & task management People management Facilitation & change management Strategic leadership How To Apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
ARM (Advanced Resource Managers)
Corsham, Wiltshire
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Lead Mechanical Engineer (Assembly, Integration & Testing) Corsham 12-month contract Paying up to £45p/h (Umbrella) ARM have partnered with an Aerospace client who are looking for an experienced AIT engineer to work out of their manufacturing site based in Corsham. As the AIT Lead Engineer, you'll be responsible for leading the Mechanical team and ensuring all engineering concepts are delivered to the shop floor. Responsibilities: * Leading a team of AIT engineers on specific projects as well as planning the mechanical team's activities on a weekly basis. * Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A - E' * Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures, and test reports. * Control of all project MGSE, flight & support equipment * Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. * Alignment - producing test procedures and operating and maintaining optical alignment equipment. * Designing test equipment, overseeing its manufacture, and commissioning * Mechanical handling of spacecraft, instruments, payloads, solar arrays, antennas etc * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Install and validate test instrumentation. * Support propulsion testing * Handling and installation of thermal hardware * Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation associated with performing these tasks. * Pyrotechnic handling, installation, and safety * Plan and control the workload of the AIT team consisting of engineers and technicians. * Be able to travel overseas to work for short periods (typically 2-3 months, could be 6-7 months on occasions) * Be able to integrate quickly and easily into an AIT team. Experience required: * Appreciation of satellite integration processes and project phases * Use of SAP or other ERP System * Understanding of build documentation and the need for it * Driving build quality through review of processes and implementation of improvements * Managing a team during day-to-day activities ensuring work is completed on time and the correct standard. * Controlling and delivery of projects to budget and schedule * Face-to-face dealings with customers and suppliers * Worked in volatile, high-pressure environments to resolve technical and personnel conflicts. * Spacecraft Mechanical testing on prime projects is essential. * Leading other team members * Production of MGSE specs and operation of MGSE and flight HW * Production of high-quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Position Available : Digital Electronic Engineer Location : Stevenage - Dynamic Working Hours Salary : Up to £53,000 + Paid Overtime, Company Bonus, Very Good Pension Package and On-site Gym Experience needed : Board level design around FPGA and SoC, interfacing with leading RF systems and developing electronic technical systems. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Digital Electronic Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Ensuring robust electronics design Using development techniques such as DFMEA Proving activities to ensure compliance against requirements Ensuring products meet their quality, rate, and cost targets What we need from you: Ideally, Degree qualified with significant post qualification experience in Electronic Design, development and delivery - preferably in defence or related industry. Excellent problem-solving skills and knowledge of a wide range of electronic technologies and products. Strong communication skills, both written and verbal, with the ability to influence and negotiate with stakeholders across the business. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
03/05/2024
Full time
Position Available : Digital Electronic Engineer Location : Stevenage - Dynamic Working Hours Salary : Up to £53,000 + Paid Overtime, Company Bonus, Very Good Pension Package and On-site Gym Experience needed : Board level design around FPGA and SoC, interfacing with leading RF systems and developing electronic technical systems. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Digital Electronic Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Ensuring robust electronics design Using development techniques such as DFMEA Proving activities to ensure compliance against requirements Ensuring products meet their quality, rate, and cost targets What we need from you: Ideally, Degree qualified with significant post qualification experience in Electronic Design, development and delivery - preferably in defence or related industry. Excellent problem-solving skills and knowledge of a wide range of electronic technologies and products. Strong communication skills, both written and verbal, with the ability to influence and negotiate with stakeholders across the business. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
ARM (Advanced Resource Managers)
Stevenage, Hertfordshire
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
03/05/2024
Project-based
Mechanical Engineer (Assembly, Integration & Testing) Stevenage 12-month contract Paying up to £35p/h (Umbrella) ARM has partnered with an Aerospace client who is looking for an experienced Mechanical Engineer (AIT) to work out of their manufacturing site based in Stevenage. As the AIT Mechanical Engineer, you'll be responsible for providing support on writing processes, plans, and procedures in 3D Experience for the production of Satellites and payloads. This includes supporting hardware assembly on the Satellites such as black boxes, Solar Array, and structure panels. Supporting Satellite environmental testing at the test facility. Responsibilities: * Support to the customization phase starting at the project kick-off. * Support project DMU (Digital mock-up/design for manufacture) sessions to ensure design for manufacture. * Lead the installation of Satellite appendages and applicable integration flows and preparation. * Oversee unit installation activities on the Satellite. * Support quality reviews, conduct PFMEA and Root Cause Analysis * Support in the creation of re-work instructions based on project requirements and identify parts and tooling required to carry them out. * Design of tooling/build aids for assembly execution * Support to R&D * Training module creation and maintenance. Experience required: * Minimum of HNC level in a Mechanical engineering discipline * Good planning skills and process competence, (MRP system experience an advantage) * Satellite Appendage installation process (Solar Array, reflectors, antennas, deployable systems). * Good understanding and detailed experience of complex mechanical systems. * Lean manufacturing techniques including 5S, root cause analysis, and continuous improvement. * Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft levels. * Handling and installation of thermal hardware (heaters, thermistors) * Mechanical integration of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads, and spacecraft and control the documentation/process associated with performing these * Previous experience with payload builds is a distinct advantage. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.