Electronic Design Engineer required by a high-tech company in Poole. Due to continued success and growth they are seeking an experienced candidate with knowledge of designing and developing electronic circuits including PCB layout and schematic capture. The successful Senior Electronic Design Engineer is likely to have a relevant degree in electronic engineering or similar and will have extensive commercial experience in electronic design. The Senior Electronic Design Engineer will play a crucial role in improving design methods liaising with numerous parts of the business. Experience in the following areas is sought; - Creation of schematic designs & PCB layout for system on chip based systems - Microcontroller based systems - STM32 or similar Any knowledge of the following would be advantageous; - Altium - CAN bus protocol - EMC compliance - Electronics Workbench - Digital & analogue design If you are seeking a role of this nature please get in touch for more information. Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy.
16/05/2024
Full time
Electronic Design Engineer required by a high-tech company in Poole. Due to continued success and growth they are seeking an experienced candidate with knowledge of designing and developing electronic circuits including PCB layout and schematic capture. The successful Senior Electronic Design Engineer is likely to have a relevant degree in electronic engineering or similar and will have extensive commercial experience in electronic design. The Senior Electronic Design Engineer will play a crucial role in improving design methods liaising with numerous parts of the business. Experience in the following areas is sought; - Creation of schematic designs & PCB layout for system on chip based systems - Microcontroller based systems - STM32 or similar Any knowledge of the following would be advantageous; - Altium - CAN bus protocol - EMC compliance - Electronics Workbench - Digital & analogue design If you are seeking a role of this nature please get in touch for more information. Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy.
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
16/05/2024
Full time
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
An excellent 12-month contract for a Fluent French speaking Embedded Software Engineer. Onsite in Belgium, possibility of remote working in the future. Daily rate: 450 Euros The client specialises in the Defence, Security (including Cyber) and Aerospace. MISSION The client wants to reinforce its technical team and is looking for an engineer who wants to develop as an Embedded software engineer. As an Embedded Software Engineer, you will integrate a multidisciplinary team of development within the Engineering department. You will be required, in the context of on firing systems or smart ammunitions, to specify, design, develop, validate, and test Embedded software. You will have the opportunity to work with innovated systems and tools in a high-tech environment. You will be expected to support multiple projects and as such will require planning and organising skills. RESPONSIBILITY Based on upper system specifications, allocate performances, define a software solution Write low- and high-level software requirements using dedicated tools and ensure traceability between requirements. Develop software in C/C++ on Microprocessor, bare metal, or Linux RTOS architecture. Understand and solve the constraints of Real Time applications, low/high level communications, multi-tread management, memory concurrency, etc. Collaborate with hardware engineer to develop abstraction layer of the hardware. Use configuration managements tools (GIT, BitBucket, Jenkins, SonarQube) Ensure code quality by checking code coverage and verify the software using unit testing procedure. Debug low level software using oscilloscopes. Collaborate with V&V and DevOps team to setup a continuous integration system. Write Software Description Documents to capitalize knowledges. Participate to internal project reviews within the company, and external reviews with the customers. Participate in the development of FPGA (VHDL language) as a plus. PROFILE You graduated with a master's degree in software or Electronic Engineer with 3 to 10 years of experience. You are architect and senior developer in C, C++ on Embedded systems Real Time application. You understand the challenges of embedding Real Time solution in micro-controllers. You have an experience in development of FPGA using VHDL and communication systems (CAN, UART,SPI, I2C, Ethernet TCP/IP and Phy, MIL-STD-1553/1760, ARINC429 ) You are a good communicator; you can show pedagogy to support other developers. You are self-motivated and like to take initiatives. You can work with Agile culture. You like following the latest trends in innovation. An experience in aeronautical, spatial, defence or automotive industry, as well as a knowledge of the standards DO-178, ARP4754 or ISO26262, is a plus. English and French (spoken and written) Please get in touch for further details.
16/05/2024
Project-based
An excellent 12-month contract for a Fluent French speaking Embedded Software Engineer. Onsite in Belgium, possibility of remote working in the future. Daily rate: 450 Euros The client specialises in the Defence, Security (including Cyber) and Aerospace. MISSION The client wants to reinforce its technical team and is looking for an engineer who wants to develop as an Embedded software engineer. As an Embedded Software Engineer, you will integrate a multidisciplinary team of development within the Engineering department. You will be required, in the context of on firing systems or smart ammunitions, to specify, design, develop, validate, and test Embedded software. You will have the opportunity to work with innovated systems and tools in a high-tech environment. You will be expected to support multiple projects and as such will require planning and organising skills. RESPONSIBILITY Based on upper system specifications, allocate performances, define a software solution Write low- and high-level software requirements using dedicated tools and ensure traceability between requirements. Develop software in C/C++ on Microprocessor, bare metal, or Linux RTOS architecture. Understand and solve the constraints of Real Time applications, low/high level communications, multi-tread management, memory concurrency, etc. Collaborate with hardware engineer to develop abstraction layer of the hardware. Use configuration managements tools (GIT, BitBucket, Jenkins, SonarQube) Ensure code quality by checking code coverage and verify the software using unit testing procedure. Debug low level software using oscilloscopes. Collaborate with V&V and DevOps team to setup a continuous integration system. Write Software Description Documents to capitalize knowledges. Participate to internal project reviews within the company, and external reviews with the customers. Participate in the development of FPGA (VHDL language) as a plus. PROFILE You graduated with a master's degree in software or Electronic Engineer with 3 to 10 years of experience. You are architect and senior developer in C, C++ on Embedded systems Real Time application. You understand the challenges of embedding Real Time solution in micro-controllers. You have an experience in development of FPGA using VHDL and communication systems (CAN, UART,SPI, I2C, Ethernet TCP/IP and Phy, MIL-STD-1553/1760, ARINC429 ) You are a good communicator; you can show pedagogy to support other developers. You are self-motivated and like to take initiatives. You can work with Agile culture. You like following the latest trends in innovation. An experience in aeronautical, spatial, defence or automotive industry, as well as a knowledge of the standards DO-178, ARP4754 or ISO26262, is a plus. English and French (spoken and written) Please get in touch for further details.
Project Description and responsibilities: Full document management during various construction phases; permitting, engineering, commissioning, maintenance and commercial operation of the plant. Document Controller to provide general records management and document control services to ensure Umicore's information assets are managed in accordance with well-defined policies, procedures, processes and practices in order that records may be retrievable in the future to support departments requirements Primary Tasks and responsibilities: . Produce and modify procedures to facilitate the transfer of various documents into and out of the companies document management system. . Conduct quality verification on formal documents to ensure conformity with Information Management standard. . Modify and update documents and drawings when necessary and as per technical specifications and contract deliverables. . Maintain, gather and electronically log and distribute various engineering documents. . Create and maintain established files of drawings and correspondence. . Quality checks on documents being received and distribution for engineering modifications. . Review the quality of documents and drawings including metadata, template, eligibility, etc. . Build and maintain document templates, contact lists, distribution lists, presentation templates and tracking logs. . Work closely with contractors to track and update colleagues of information requiring approval and track status updates Technical Profile requirements: . Diploma or degree in business administration, records/information management or a related discipline. . Experience with data entry, compiling of files and distribution of project documentation is an asset. . 4-5 years' experience in a document control role, preferably in a construction or engineering setting. . Experience working in various document management systems. . Strong proficiency in various Microsoft Office applications. . Strong organizational skills and the ability to work well in a rapidly changing environment. . Fluent both in English and Spanish Non-Technical Profile Requirements : . Strong and effective communicator . Ability and willingness to work independently and in a team setting . Adaptabilit . Decisiveness . Organization skills . Critical thinking Location: . North of Spain, exact location remains confidential till at least early July . Until EOY 2024 remote work, afterwards consultants are expected to work onsite Business Travel: . Travel will be required and outside Spain reimbursed via expenses Contract: . Long term contract . Confirmation of the mission will take place before 1/7 . Official confirmation and contract creation scheduled for early July Start: . Objective +- 1st of August . Consultants can perform notice if 4-6 weeks, longer is to discuss with the manager . Consultants cannot take long holidays in July/August after start due to the high workload Languages: . Fluent In Spanish & English Rate: . Market-level Rates for Spain . All-in Rate for Remote and local presence at SPAIN . No expenses accepted Reason for Hire Specific Skills Required for Project Safety Equipment Not applicable (keep in mind that for Olen and Hoboken sites a neon vest is mandatory) Additional Safety Equipment to be provided by Supplier n.a. Travel Required? Yes Travel percentage 10%
16/05/2024
Project-based
Project Description and responsibilities: Full document management during various construction phases; permitting, engineering, commissioning, maintenance and commercial operation of the plant. Document Controller to provide general records management and document control services to ensure Umicore's information assets are managed in accordance with well-defined policies, procedures, processes and practices in order that records may be retrievable in the future to support departments requirements Primary Tasks and responsibilities: . Produce and modify procedures to facilitate the transfer of various documents into and out of the companies document management system. . Conduct quality verification on formal documents to ensure conformity with Information Management standard. . Modify and update documents and drawings when necessary and as per technical specifications and contract deliverables. . Maintain, gather and electronically log and distribute various engineering documents. . Create and maintain established files of drawings and correspondence. . Quality checks on documents being received and distribution for engineering modifications. . Review the quality of documents and drawings including metadata, template, eligibility, etc. . Build and maintain document templates, contact lists, distribution lists, presentation templates and tracking logs. . Work closely with contractors to track and update colleagues of information requiring approval and track status updates Technical Profile requirements: . Diploma or degree in business administration, records/information management or a related discipline. . Experience with data entry, compiling of files and distribution of project documentation is an asset. . 4-5 years' experience in a document control role, preferably in a construction or engineering setting. . Experience working in various document management systems. . Strong proficiency in various Microsoft Office applications. . Strong organizational skills and the ability to work well in a rapidly changing environment. . Fluent both in English and Spanish Non-Technical Profile Requirements : . Strong and effective communicator . Ability and willingness to work independently and in a team setting . Adaptabilit . Decisiveness . Organization skills . Critical thinking Location: . North of Spain, exact location remains confidential till at least early July . Until EOY 2024 remote work, afterwards consultants are expected to work onsite Business Travel: . Travel will be required and outside Spain reimbursed via expenses Contract: . Long term contract . Confirmation of the mission will take place before 1/7 . Official confirmation and contract creation scheduled for early July Start: . Objective +- 1st of August . Consultants can perform notice if 4-6 weeks, longer is to discuss with the manager . Consultants cannot take long holidays in July/August after start due to the high workload Languages: . Fluent In Spanish & English Rate: . Market-level Rates for Spain . All-in Rate for Remote and local presence at SPAIN . No expenses accepted Reason for Hire Specific Skills Required for Project Safety Equipment Not applicable (keep in mind that for Olen and Hoboken sites a neon vest is mandatory) Additional Safety Equipment to be provided by Supplier n.a. Travel Required? Yes Travel percentage 10%
Hardware Deign Engineer - Nottinghamshire Our client based in Nottinghamshire is looking to hire an experienced Hardware Design Engineer to join their team. In this newly created role (due to expansion) you will be joining an established team where the delivery of high quality, high performing solutions achieved in a right first-time environment is valued & rewarded. This role will see you: Design, implement, and optimise hardware design solutions. Monitor and revise delivery to achieve agreed KPIs. Ensure all designs meet relevant safety and industry standards. Deliver cost efficient, obsolescence tolerant designs. Participate in hardware/software co-design and system-level debugging. Support FAT, SAT & Commissioning activity. Leading smaller projects, collaborating on larger ones. Follow industry best practice and company quality standards whilst looking for opportunities for improvement The relevant skills for the role include: Electronics Engineering or related degree, or NVQ Level 5. Practical and relevant experience in a Hardware Electronics Design role. Required Experience Analogue audio. Micro controller/processor (STM32, Arm9, PIC). Reverse engineering analysis techniques. Desirable Experience Transformer design. Power supply design. FPGA/CPLD. CCTV/Networking. DFMEA. Railway environment & standards In return for your skills my client is offering a salary up to £60k, a 37h/Wk, with lunchtime finish Friday, 25 days holiday and option to buy additional 5 days, Pension, employee contribution +2%, capped at 12%., Bupa health care. This is a office based role so you will need to live in a commutable distance of Nottinghamshire IDEALLY Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
15/05/2024
Full time
Hardware Deign Engineer - Nottinghamshire Our client based in Nottinghamshire is looking to hire an experienced Hardware Design Engineer to join their team. In this newly created role (due to expansion) you will be joining an established team where the delivery of high quality, high performing solutions achieved in a right first-time environment is valued & rewarded. This role will see you: Design, implement, and optimise hardware design solutions. Monitor and revise delivery to achieve agreed KPIs. Ensure all designs meet relevant safety and industry standards. Deliver cost efficient, obsolescence tolerant designs. Participate in hardware/software co-design and system-level debugging. Support FAT, SAT & Commissioning activity. Leading smaller projects, collaborating on larger ones. Follow industry best practice and company quality standards whilst looking for opportunities for improvement The relevant skills for the role include: Electronics Engineering or related degree, or NVQ Level 5. Practical and relevant experience in a Hardware Electronics Design role. Required Experience Analogue audio. Micro controller/processor (STM32, Arm9, PIC). Reverse engineering analysis techniques. Desirable Experience Transformer design. Power supply design. FPGA/CPLD. CCTV/Networking. DFMEA. Railway environment & standards In return for your skills my client is offering a salary up to £60k, a 37h/Wk, with lunchtime finish Friday, 25 days holiday and option to buy additional 5 days, Pension, employee contribution +2%, capped at 12%., Bupa health care. This is a office based role so you will need to live in a commutable distance of Nottinghamshire IDEALLY Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Senior Electronics Engineer wanted for an exciting new client of mine based in Cambridgeshire. Job Responsibilities Day to day, your responsibilities will include: Designing, implementing, and testing printed circuit boards to support the project, focusing on drive electronics for nano-precision actuators, image capture systems, and miniaturised computers to implement closed-loop control systems. Taking functional specifications and turning them into detailed designs. Simulating and producing detailed analogue, digital and mixed-signal circuit designs Developing schematics, designing PCB layouts and generating and managing BOMs for multi-PCBA product designs in Altium Designer Producing and implementing test plans to evaluate designs and verify product functionality against requirements. Debugging, testing and evaluating designs in the lab and supporting integration of electronics into the product alongside other team members Working and communicating with vendors Job Requirements 5+ years of industry experience working in multidisciplinary teams. A fundamental understanding of PCB layout techniques and standards, including experience in PCB prototyping and soldering. Solid experience creating and executing test and measurement benchtop experiments. Test and measurement experience with DMMs, oscilloscopes, logic analysers, and other lab equipment. Understanding of design for manufacture, test, cost and reliability Trustworthy colleague to meet agreed project timelines and goals.
15/05/2024
Full time
Senior Electronics Engineer wanted for an exciting new client of mine based in Cambridgeshire. Job Responsibilities Day to day, your responsibilities will include: Designing, implementing, and testing printed circuit boards to support the project, focusing on drive electronics for nano-precision actuators, image capture systems, and miniaturised computers to implement closed-loop control systems. Taking functional specifications and turning them into detailed designs. Simulating and producing detailed analogue, digital and mixed-signal circuit designs Developing schematics, designing PCB layouts and generating and managing BOMs for multi-PCBA product designs in Altium Designer Producing and implementing test plans to evaluate designs and verify product functionality against requirements. Debugging, testing and evaluating designs in the lab and supporting integration of electronics into the product alongside other team members Working and communicating with vendors Job Requirements 5+ years of industry experience working in multidisciplinary teams. A fundamental understanding of PCB layout techniques and standards, including experience in PCB prototyping and soldering. Solid experience creating and executing test and measurement benchtop experiments. Test and measurement experience with DMMs, oscilloscopes, logic analysers, and other lab equipment. Understanding of design for manufacture, test, cost and reliability Trustworthy colleague to meet agreed project timelines and goals.
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
14/05/2024
Full time
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
Functional Safety Engineer (electronics) - £55 - 70 per hour - inside ir35 - 6 months (extensions likely) - Staffordshire - hybrid working (2 days onsite a week) - Sector: Energy Yolk recruitment a recruiting for a Functional Safety Engineer (electronics) to work with a world class engineering client in the energy and nuclear sector. This is an exciting opportunity to work with a leader in advanced systems integration with some of the largest energy projects the country has to offer. Responsibilities: Design and develop Safety Instrumented Systems (SIS) to meet Safety Integrity Level (SIL) requirements. Conduct risk assessments and hazard analysis to identify safety requirements. Collaborate with cross-functional teams to integrate safety features into Industrial Control Systems (ICS). Implement measures to protect safety-critical electronic systems. Perform verification and validation activities to ensure compliance with industry standards. Provide technical expertise and guidance on functional safety principles and best practices. Core Skills: Must be able to achieve SC security clearance. TUV certification in functional safety Knowledge of related safety and environmental legislation. Proven experience in designing and implementing Safety Instrumented Systems (SIS). Proficiency in relevant industry standards such as IEC 61508 and IEC 61511. Desirable Skills: Hold a current SC security clearance.
14/05/2024
Project-based
Functional Safety Engineer (electronics) - £55 - 70 per hour - inside ir35 - 6 months (extensions likely) - Staffordshire - hybrid working (2 days onsite a week) - Sector: Energy Yolk recruitment a recruiting for a Functional Safety Engineer (electronics) to work with a world class engineering client in the energy and nuclear sector. This is an exciting opportunity to work with a leader in advanced systems integration with some of the largest energy projects the country has to offer. Responsibilities: Design and develop Safety Instrumented Systems (SIS) to meet Safety Integrity Level (SIL) requirements. Conduct risk assessments and hazard analysis to identify safety requirements. Collaborate with cross-functional teams to integrate safety features into Industrial Control Systems (ICS). Implement measures to protect safety-critical electronic systems. Perform verification and validation activities to ensure compliance with industry standards. Provide technical expertise and guidance on functional safety principles and best practices. Core Skills: Must be able to achieve SC security clearance. TUV certification in functional safety Knowledge of related safety and environmental legislation. Proven experience in designing and implementing Safety Instrumented Systems (SIS). Proficiency in relevant industry standards such as IEC 61508 and IEC 61511. Desirable Skills: Hold a current SC security clearance.
Electronics Engineer Alton, Hampshire £50k - £70K DOE Role details: We are working with an innovative Space company with world class expertise in Spacecraft. They design, build and operate space missions for global customers. They are looking for an Electronics Engineer to support on a range of activities from detailed design, development, documentation and test through to wider spacecraft support. Responsibilities: Derivation and management of technical requirements from Mission and System Level to subsystem and equipment level Design, development, prototyping, build and test of electronic circuits and systems from initial requirements through to launch and in-orbit operations Detailed design activities including Schematic production; Selection and procurement of relevant components and assemblies to support design and development activities; ECAD design either directly or managing a specialist Produce electronics documentation, eg SoW, Design Document, Interface Control Document, Test Plans Requirements: Educated to at least degree - level or equivalent in a relevant scientific or engineering discipline Technical delivery of complex electrical/electronic systems, ideally on a satellite programme (or in the Aerospace or automotive sector) Proficient in use of appropriate technical tools (eg Altium, OrCAD, PSpice) Experience in documentation for space/aerospace projects (highly desirable) Experience in testing and test automation Benefits: 37.5 hour working week, Flexible working, 30 days holiday 10% Pension, Bonus Life insurance, Private medical, Income protection Eligibility: To be considered for the role, you must have permanent UK residency status.
14/05/2024
Full time
Electronics Engineer Alton, Hampshire £50k - £70K DOE Role details: We are working with an innovative Space company with world class expertise in Spacecraft. They design, build and operate space missions for global customers. They are looking for an Electronics Engineer to support on a range of activities from detailed design, development, documentation and test through to wider spacecraft support. Responsibilities: Derivation and management of technical requirements from Mission and System Level to subsystem and equipment level Design, development, prototyping, build and test of electronic circuits and systems from initial requirements through to launch and in-orbit operations Detailed design activities including Schematic production; Selection and procurement of relevant components and assemblies to support design and development activities; ECAD design either directly or managing a specialist Produce electronics documentation, eg SoW, Design Document, Interface Control Document, Test Plans Requirements: Educated to at least degree - level or equivalent in a relevant scientific or engineering discipline Technical delivery of complex electrical/electronic systems, ideally on a satellite programme (or in the Aerospace or automotive sector) Proficient in use of appropriate technical tools (eg Altium, OrCAD, PSpice) Experience in documentation for space/aerospace projects (highly desirable) Experience in testing and test automation Benefits: 37.5 hour working week, Flexible working, 30 days holiday 10% Pension, Bonus Life insurance, Private medical, Income protection Eligibility: To be considered for the role, you must have permanent UK residency status.
Safety Engineer (Multi-Disciplinary within defence industry including Aviation, Land, Submarine) Length: 6 months initially Location : Across the UK, once per week travel to local site Salary: £Competitive Candidates must be eligible for SC Clearance or hold active SC Clearance. Role Overview: As a Safety Engineer, you will be responsible for ensuring the safety of various systems across different disciplines. The main duties of the role include conducting safety analysis, producing hazard reports and safety assessment reports, maintaining hazard logs, and supporting the documentation and records management related to safety management systems. Key Responsibilities: Conduct safety analysis on a range of mission support systems across multiple disciplines. Produce hazard analysis reports and safety assessment reports for different systems. Maintain hazard logs and produce related reports. Support the maintenance, control, and configuration management of documentation and records for safety management systems of various mission systems. Qualifications and Experience: A degree in a relevant engineering discipline or a minimum of 3 years' experience in a safety-related role within a relevant sector. Essential Skills: Experience with software- and safety-related standards. Demonstrated experience in functional safety of complex systems. Proficiency in safety engineering tools and techniques, such as developing safety assurance cases, conducting failure analysis, and managing hazard logs. Desirable Skills: Knowledge of relevant regulatory publications. Experience in demonstrating functional safety within different sectors. Familiarity with aviation mission planning systems and electronic flight bag applications/standards. Understanding of aircraft integration requirements and challenges. Experience in stakeholder management within relevant environments. Additional Requirements: The role may require occasional travel within the UK. A Full UK Driver's License or the ability to travel independently within the UK is essential. Adaptive working arrangements are available.
13/05/2024
Full time
Safety Engineer (Multi-Disciplinary within defence industry including Aviation, Land, Submarine) Length: 6 months initially Location : Across the UK, once per week travel to local site Salary: £Competitive Candidates must be eligible for SC Clearance or hold active SC Clearance. Role Overview: As a Safety Engineer, you will be responsible for ensuring the safety of various systems across different disciplines. The main duties of the role include conducting safety analysis, producing hazard reports and safety assessment reports, maintaining hazard logs, and supporting the documentation and records management related to safety management systems. Key Responsibilities: Conduct safety analysis on a range of mission support systems across multiple disciplines. Produce hazard analysis reports and safety assessment reports for different systems. Maintain hazard logs and produce related reports. Support the maintenance, control, and configuration management of documentation and records for safety management systems of various mission systems. Qualifications and Experience: A degree in a relevant engineering discipline or a minimum of 3 years' experience in a safety-related role within a relevant sector. Essential Skills: Experience with software- and safety-related standards. Demonstrated experience in functional safety of complex systems. Proficiency in safety engineering tools and techniques, such as developing safety assurance cases, conducting failure analysis, and managing hazard logs. Desirable Skills: Knowledge of relevant regulatory publications. Experience in demonstrating functional safety within different sectors. Familiarity with aviation mission planning systems and electronic flight bag applications/standards. Understanding of aircraft integration requirements and challenges. Experience in stakeholder management within relevant environments. Additional Requirements: The role may require occasional travel within the UK. A Full UK Driver's License or the ability to travel independently within the UK is essential. Adaptive working arrangements are available.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
13/05/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Overview: You have the chance to join a cutting-edge technology company who specialise in printing and labelling for customer globally, as a C++ Embedded Software Engineer. The C++ Embedded Software Engineer will be joining a global leader in product identification, that provides innovative coding and marking solutions that helps customers ensure product safety and improve their productivity. The successful C++ Embedded Software Engineer will be able to interpret customer specifications and provide technical solutions to complex engineering problems. C++ Embedded Software Engineer Responsibilities: Analyse customer specifications and offer technical resolutions to engineering challenges. The Senior Software Engineer will devise designs and technical strategies for emerging technologies within the R&D Technology division. Develop, deploy, and sustain C++ software for both new and existing products. The Senior Software Engineer will work closely with electronic, mechanical, and fellow software engineers, overseeing technical reviews, conducting feasibility studies, and participating in project evaluations as needed. C++ Embedded Software Engineer Skills: Proficiency in C++, particularly for Microprocessor (Embedded) applications. Substantial experience in software development for Windows, WinCE, or Real Time operating systems (RTOS). Understanding of Real Time and concurrent principles, with an awareness of networked devices, distributed processes, and packet-based protocols. Preferably, experience in electronics control and interfacing with motors, sensors, etc. Familiarity with Linux operating systems is advantageous.
13/05/2024
Full time
Overview: You have the chance to join a cutting-edge technology company who specialise in printing and labelling for customer globally, as a C++ Embedded Software Engineer. The C++ Embedded Software Engineer will be joining a global leader in product identification, that provides innovative coding and marking solutions that helps customers ensure product safety and improve their productivity. The successful C++ Embedded Software Engineer will be able to interpret customer specifications and provide technical solutions to complex engineering problems. C++ Embedded Software Engineer Responsibilities: Analyse customer specifications and offer technical resolutions to engineering challenges. The Senior Software Engineer will devise designs and technical strategies for emerging technologies within the R&D Technology division. Develop, deploy, and sustain C++ software for both new and existing products. The Senior Software Engineer will work closely with electronic, mechanical, and fellow software engineers, overseeing technical reviews, conducting feasibility studies, and participating in project evaluations as needed. C++ Embedded Software Engineer Skills: Proficiency in C++, particularly for Microprocessor (Embedded) applications. Substantial experience in software development for Windows, WinCE, or Real Time operating systems (RTOS). Understanding of Real Time and concurrent principles, with an awareness of networked devices, distributed processes, and packet-based protocols. Preferably, experience in electronics control and interfacing with motors, sensors, etc. Familiarity with Linux operating systems is advantageous.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
13/05/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.