Please note: this role is based in Somerset, please don't apply unless you can work in this location. Description The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities and on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks and on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the Principal Contractor and their other tier 1 contractors Act as Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and expertise HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Experience in managing people on large scale/international projects Qualifications Essential Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician;Engineering Fitter;Metal Fabricator;Project Controls TechnicianEnrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (HPC specific training)CCNSGTMIC trained (First Aid at Work trained) TMIC trained (First Aid at Work trained) IC trained Ideally Experience on HPC one of A,B,C & D or One of the following from A or All of B and one of the following from C and D: A Level 3 Apprenticeship: - Engineering Construction - Pipefitting Standard or Mechanical or Plating; - Maintenance and Operations Engineering Technician; - Engineering Fitter; - Metal Fabricator; - Project Controls Technician Certificate of Apprenticeship in Plating ACE Card demonstrating Level 3 Diploma in any of the following disciplines: Pipefitting, Mechanical, Plating, Fabricator, B B0 H0/CSQ/SCNI/M1/HN1 large component replacement or HN1 reactor opening and closing (OFC) C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely
29/04/2024
Project-based
Please note: this role is based in Somerset, please don't apply unless you can work in this location. Description The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities and on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks and on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the Principal Contractor and their other tier 1 contractors Act as Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and expertise HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Experience in managing people on large scale/international projects Qualifications Essential Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician;Engineering Fitter;Metal Fabricator;Project Controls TechnicianEnrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (HPC specific training)CCNSGTMIC trained (First Aid at Work trained) TMIC trained (First Aid at Work trained) IC trained Ideally Experience on HPC one of A,B,C & D or One of the following from A or All of B and one of the following from C and D: A Level 3 Apprenticeship: - Engineering Construction - Pipefitting Standard or Mechanical or Plating; - Maintenance and Operations Engineering Technician; - Engineering Fitter; - Metal Fabricator; - Project Controls Technician Certificate of Apprenticeship in Plating ACE Card demonstrating Level 3 Diploma in any of the following disciplines: Pipefitting, Mechanical, Plating, Fabricator, B B0 H0/CSQ/SCNI/M1/HN1 large component replacement or HN1 reactor opening and closing (OFC) C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely
A Development and Production Test Engineer - Electronic/Electrical is required for a long term contract assignment on site in Stevenage. Role responsibilities . Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. . Provide Test Engineering support during Design/Development phases from initial concept through to Production Readiness Review and release to Operations. * Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. * Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level. . Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme. * Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements. * Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action. Role requirements (skills, training and qualifications) * HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test. * A good understanding of measurement and test principles, and associated test equipment. * An understanding of the typical CADMID product life cycle for test equipment is desirable. * An understanding of RF and microwave technology at subsystem level would be an advantage. * An understanding of Environmental testing (including ESS) would also be an advantage. * Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. * Proven analytical and problem solving skills, with strong attention to detail. * The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. * Manual handling training. * ESD training. Medical requirements * None Health surveillance requirements * None Why you should come and work at MBDA * MBDA, a world leader in missiles and missile systems, is a multi-national group with 10,000 employees on industrial facilities in France, Germany, Italy, the United Kingdom and the United States * With some of the most sophisticated technology in defence, MBDA is Europe's leading guided weapons company and with this in mind we continually look to broaden our existing talent base whilst maintaining a strategic edge, by exploiting new markets and new applications for our world-class technology base * Our work is complex, challenging and innovative. It takes a range of professionals across the full engineering and commercial spectrum to carry it out. Whatever field our people specialise in, they all share the same mind-set: a drive to make things work better and to redefine the established standards Please note that in order to apply for MBDA UK opportunities you will need to be eligible for SC (Secret Level) UK Security Clearance HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test. * A good understanding of measurement and test principles, and associated test equipment. * An understanding of the typical CADMID product life cycle for test equipment is desirable. * An understanding of RF and microwave technology at subsystem level would be an advantage. * An understanding of Environmental testing (including ESS) would also be an advantage. Skillset/experience required: Experience plus HNC/HND or equivalent Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
29/04/2024
Project-based
A Development and Production Test Engineer - Electronic/Electrical is required for a long term contract assignment on site in Stevenage. Role responsibilities . Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. . Provide Test Engineering support during Design/Development phases from initial concept through to Production Readiness Review and release to Operations. * Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. * Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level. . Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme. * Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements. * Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action. Role requirements (skills, training and qualifications) * HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test. * A good understanding of measurement and test principles, and associated test equipment. * An understanding of the typical CADMID product life cycle for test equipment is desirable. * An understanding of RF and microwave technology at subsystem level would be an advantage. * An understanding of Environmental testing (including ESS) would also be an advantage. * Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. * Proven analytical and problem solving skills, with strong attention to detail. * The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. * Manual handling training. * ESD training. Medical requirements * None Health surveillance requirements * None Why you should come and work at MBDA * MBDA, a world leader in missiles and missile systems, is a multi-national group with 10,000 employees on industrial facilities in France, Germany, Italy, the United Kingdom and the United States * With some of the most sophisticated technology in defence, MBDA is Europe's leading guided weapons company and with this in mind we continually look to broaden our existing talent base whilst maintaining a strategic edge, by exploiting new markets and new applications for our world-class technology base * Our work is complex, challenging and innovative. It takes a range of professionals across the full engineering and commercial spectrum to carry it out. Whatever field our people specialise in, they all share the same mind-set: a drive to make things work better and to redefine the established standards Please note that in order to apply for MBDA UK opportunities you will need to be eligible for SC (Secret Level) UK Security Clearance HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test. * A good understanding of measurement and test principles, and associated test equipment. * An understanding of the typical CADMID product life cycle for test equipment is desirable. * An understanding of RF and microwave technology at subsystem level would be an advantage. * An understanding of Environmental testing (including ESS) would also be an advantage. Skillset/experience required: Experience plus HNC/HND or equivalent Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
We are currently looking on behalf of one of our important clients for an Electromagnetics Engineer. The role is a permanent position based in Zürich. Your Role: Participate in a range of research projects in electromagnetics & associated applications. Provide scientific contributions to the theory, modelling, optimization & application of the EM near-field. Develop novel instrumentation, computational methods & characterization procedures. Participate in national & international standard activities (IEC, IEEE, etc.). Collaborate with external research partners & provision hardware support for customers. Your Skills & Experience: At least 2 years of professional experience with EM Simulation Software (eg COMSOL, ANSYS) and/or EM Measurement Instruments. Skilled & experience in Programming in C++ and/or Python. Ideally experienced in at least one of the following areas: Wireless Communication Systems, Radiofrequency Antenna Simulation & Measurements, Electrodynamics, Numerical Simulation of EM fields, Biomedical Engineering, Error Analysis & Uncertainty Conventions. Your Profile: Completed University Education, preferable to PhD level, in Electrical Engineering or Physics. Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.
26/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Electromagnetics Engineer. The role is a permanent position based in Zürich. Your Role: Participate in a range of research projects in electromagnetics & associated applications. Provide scientific contributions to the theory, modelling, optimization & application of the EM near-field. Develop novel instrumentation, computational methods & characterization procedures. Participate in national & international standard activities (IEC, IEEE, etc.). Collaborate with external research partners & provision hardware support for customers. Your Skills & Experience: At least 2 years of professional experience with EM Simulation Software (eg COMSOL, ANSYS) and/or EM Measurement Instruments. Skilled & experience in Programming in C++ and/or Python. Ideally experienced in at least one of the following areas: Wireless Communication Systems, Radiofrequency Antenna Simulation & Measurements, Electrodynamics, Numerical Simulation of EM fields, Biomedical Engineering, Error Analysis & Uncertainty Conventions. Your Profile: Completed University Education, preferable to PhD level, in Electrical Engineering or Physics. Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
25/04/2024
Full time
Job Title: Continuous Improvement Lead Industry: Medical Device Manufacturing Location: Plymouth Position Type: Permanent About The Company Join a pioneering team at a UK-based company specializing in advanced wound care and wound closure products. An organisation dedicated to developing and manufacturing world-leading solutions that enhance patient care. With a wealth of resources and specialized expertise, they offer a unique opportunity to be part of a team involved in every aspect of product design, development, and manufacture. Job Description Overview Responsible for all manufacturing processes, lean improvements, cost reduction, technical capability enhancement, process development, new production introduction delivering outputs in line with the business objectives on safety, quality, delivery, and cost. To execute site support activities and provide maintenance of all relevant operational equipment to ensure longevity and availability. Key Responsibilities Working closely alongside production operations to ensure the startup/shut down and continual running of all manufacturing processes. Establish & maintain standard processes within the validated process window plus optimisation of the technical performance for all manufacturing elements. Investigate and resolve issues related to the technical performance Optimize and deliver continuous improvement on existing manufacturing processes. Assist R&D with the introduction of new products and processes into manufacturing. Development of new standard processes and ensure optimal implementation into manufacturing supported with initial procedures, training and coaching of manufacturing. Collaborate with Group Engineering to execute or support assigned capital expenditure projects. Maintain all production equipment to the defined schedule and provide maintenance of the whole site requirements including, fire system testing/training, legionella checks, calibration, and contractor control. Qualifications Current experience in production environment support role (or 5 years min). Experience of developing and/or testing a process within a clean room manufacturing environment. Good understanding of Lean Principles (5S/VSM/Kaizen). Minimum of HNC level qualification in mechanical, electronic, industrial, or manufacturing engineering, or similar. Experience in process and product validation (sterile packaging according to ISO 11607 would be advantageous). Understanding of a quality management system (ISO13485/FDA) and medical device manufacturing advantageous. Very good MS Office skills, especially Excel. Strong organizational skills with the ability to communicate at all levels of the organization. Effective time management with the ability to set priorities. Good written and spoken English. Salary & Benefits Up to £45,000 per annum (Depending on Experience) Annual incentive bonus Life Cover Penson contribution up to 6% Dental Insurance Employee share scheme Other Information Exciting opportunity to lead a transformative project with significant organizational impact. Competitive salary package commensurate with experience. Opportunity to work with a dynamic and collaborative team focused on driving continuous improvement and excellence. How to Apply Apply now by submitting your CV below, alternatively you can send your CV. Please include "Continuous Improvement Lead" in the subject line
ARM (Advanced Resource Managers)
Didcot, Oxfordshire
Operations Director Didcot Paying up to £70,000 - £85,000 (DOE) ARM has partnered with an Energy client who is looking for an experienced Operations Director to join their ever-growing team. As the Operations Director, you'll work closely with the CEO as part of the leadership team and be responsible for running the day-to-day operations of the company as well as formulating the company's strategic and operational objectives Responsibilities: * Help the company grow. Supervise expansion of our facilities, assets, team, and projects * Manage design and execution of building fit-outs as part of company expansion. * Recruit, train, and manage staff, including managing a small dynamic team that will report into you. * Managing budgets and forecasts, examining financial data, and use it to improve efficiency. * Ensure all operations are carried on in an appropriate, cost-effective way. * Improve operational management systems, processes, and best practices. * Plan inventory and oversee purchase efficiency. * Perform quality controls and monitor production KPIs. * Find ways to increase the quality of customer service. * Help the company to promote high morale and communicate operating policies, customer issues and safety measures * Help the organisation's processes to remain legally compliant. Experience required: * Previous operations experience with companies that are providing technical services or production as a service * Technical knowledge/background, ideally with a degree in engineering or science * A can-do attitude and creativity to get things done, with the ability to work in a small, start-up organization * Experience managing and training teams. * Experience with data interpretation and financial planning. * Excellent organisational & interpersonal skills * Resourcefulness and flexibility to handle a range of tasks while collaborating as part of a team. * Ability to work under pressure, to prioritize and to manage a varied workload. * Data-informed decision-making skills. * Critical thinking and a problem-solving attitude. Benefits * Salary of £70,000 - £85,000, dependent on experience * The opportunity to join the company share option scheme and benefit from the spoils as the company grows * 25 days annual leave plus bank holidays * Up to 6% contribution to pension scheme * Private medical insurance * Flexible Monday to Friday working hours Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
25/04/2024
Full time
Operations Director Didcot Paying up to £70,000 - £85,000 (DOE) ARM has partnered with an Energy client who is looking for an experienced Operations Director to join their ever-growing team. As the Operations Director, you'll work closely with the CEO as part of the leadership team and be responsible for running the day-to-day operations of the company as well as formulating the company's strategic and operational objectives Responsibilities: * Help the company grow. Supervise expansion of our facilities, assets, team, and projects * Manage design and execution of building fit-outs as part of company expansion. * Recruit, train, and manage staff, including managing a small dynamic team that will report into you. * Managing budgets and forecasts, examining financial data, and use it to improve efficiency. * Ensure all operations are carried on in an appropriate, cost-effective way. * Improve operational management systems, processes, and best practices. * Plan inventory and oversee purchase efficiency. * Perform quality controls and monitor production KPIs. * Find ways to increase the quality of customer service. * Help the company to promote high morale and communicate operating policies, customer issues and safety measures * Help the organisation's processes to remain legally compliant. Experience required: * Previous operations experience with companies that are providing technical services or production as a service * Technical knowledge/background, ideally with a degree in engineering or science * A can-do attitude and creativity to get things done, with the ability to work in a small, start-up organization * Experience managing and training teams. * Experience with data interpretation and financial planning. * Excellent organisational & interpersonal skills * Resourcefulness and flexibility to handle a range of tasks while collaborating as part of a team. * Ability to work under pressure, to prioritize and to manage a varied workload. * Data-informed decision-making skills. * Critical thinking and a problem-solving attitude. Benefits * Salary of £70,000 - £85,000, dependent on experience * The opportunity to join the company share option scheme and benefit from the spoils as the company grows * 25 days annual leave plus bank holidays * Up to 6% contribution to pension scheme * Private medical insurance * Flexible Monday to Friday working hours Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Medical Field Service Engineer A competitive salary plus benefits - outlined below! Who is the company? An exciting new opportunity for a Field Service Engineer is now available working for a manufacturer for medical devices. What is the role? As a Field Service Engineer you will be required to service and repair medical equipment found within NHS hospitals. Key responsibilities are as follows; To carry out routine servicing of equipment. To carry out routine adjustments of equipment, where necessary. To maintain adequate stock levels of spare parts within guidelines. To maintain quality documentation records for submission to the customer via approved systems. To cultivate a positive rapport with the customer, always demonstrating first class interpersonal skills in a courteous and professional manner. This role will be home based, travelling to customers predominantly based in and around the Somerset area. This role will be best suited to those with prior Biomedical Engineering experience. The Medical Service Engineer's working hours are Monday to Friday, 40hrs a week including travel (door to door). What package is on offer? £30-40,000 Company car or car allowance Bonus Paid overtime Private Pension Private medical care Life Assurance 25 days holiday + bank holiday Laptop, phone and tools What experience is needed to apply? Previous medical device maintenance experience eg as a field service engineer, biomedical engineer, ebme engineer, eme engineer, clinical engineer etc. UK driving licence Good customer service, team worker and communication skills What happens next? Click APPLY NOW to being your application. Should you be suitable, a CBSbutler representative to contact you within 5 working days.
23/04/2024
Full time
Medical Field Service Engineer A competitive salary plus benefits - outlined below! Who is the company? An exciting new opportunity for a Field Service Engineer is now available working for a manufacturer for medical devices. What is the role? As a Field Service Engineer you will be required to service and repair medical equipment found within NHS hospitals. Key responsibilities are as follows; To carry out routine servicing of equipment. To carry out routine adjustments of equipment, where necessary. To maintain adequate stock levels of spare parts within guidelines. To maintain quality documentation records for submission to the customer via approved systems. To cultivate a positive rapport with the customer, always demonstrating first class interpersonal skills in a courteous and professional manner. This role will be home based, travelling to customers predominantly based in and around the Somerset area. This role will be best suited to those with prior Biomedical Engineering experience. The Medical Service Engineer's working hours are Monday to Friday, 40hrs a week including travel (door to door). What package is on offer? £30-40,000 Company car or car allowance Bonus Paid overtime Private Pension Private medical care Life Assurance 25 days holiday + bank holiday Laptop, phone and tools What experience is needed to apply? Previous medical device maintenance experience eg as a field service engineer, biomedical engineer, ebme engineer, eme engineer, clinical engineer etc. UK driving licence Good customer service, team worker and communication skills What happens next? Click APPLY NOW to being your application. Should you be suitable, a CBSbutler representative to contact you within 5 working days.
We are currently looking on behalf of one of our important clients for an Application Engineer for Computational Electromagnetics (CEM). The role is a permanent position based in Zürich. Your Role: Support a development team during all software release activities (eg, testing of software, writing of application notes & manuals & training sessions). Provide technical support for global users. Collect feedback from users & partners & collaborate with research & development teams to improve a simulation platform. Develop showcases for various applications that demonstrate the features & capabilities of a simulation platform. Carry out technical presentations at seminars & workshops. Participation in scientific conferences & exhibitions. Research & observe market trends & competitor products. Your Skills & Experience: From 2 to 7 years of professional experience as an Application Engineer (or similar) OR a PhD Graduate with acquired associated skills. A Knowledge of & practical experience in the areas of Computational Modelling & Simulation, Computational Electromagnetics (CEM) & EM simulation software (eg, COMSOL, ANSYS) OR in Medical Device Engineering. A solid background in & understanding of Electromagnetic (EM) Theory. Any additional experience in the areas of Antenna Design, Software Development, Scripting or Web Applications is considered a plus. A good understanding of Software Development Processes. Ideally experienced in FDTD simulation tools such as CST. Your Profile: University Degree in Electrical Engineering or Physics Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.
23/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Application Engineer for Computational Electromagnetics (CEM). The role is a permanent position based in Zürich. Your Role: Support a development team during all software release activities (eg, testing of software, writing of application notes & manuals & training sessions). Provide technical support for global users. Collect feedback from users & partners & collaborate with research & development teams to improve a simulation platform. Develop showcases for various applications that demonstrate the features & capabilities of a simulation platform. Carry out technical presentations at seminars & workshops. Participation in scientific conferences & exhibitions. Research & observe market trends & competitor products. Your Skills & Experience: From 2 to 7 years of professional experience as an Application Engineer (or similar) OR a PhD Graduate with acquired associated skills. A Knowledge of & practical experience in the areas of Computational Modelling & Simulation, Computational Electromagnetics (CEM) & EM simulation software (eg, COMSOL, ANSYS) OR in Medical Device Engineering. A solid background in & understanding of Electromagnetic (EM) Theory. Any additional experience in the areas of Antenna Design, Software Development, Scripting or Web Applications is considered a plus. A good understanding of Software Development Processes. Ideally experienced in FDTD simulation tools such as CST. Your Profile: University Degree in Electrical Engineering or Physics Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.