Electronics CAD Engineer - Safety Technology (Contract) CPS Group is seeking an Electronics CAD Engineer to join our esteemed global client based in Kent on an initial 3 - 4+ month contract, outside IR35. There is potential that this contract will be extended to 6 months. Industry: Safety Technology Location: Kent (On-site 4 days per week) Contract Length: Initially 3 - 4 months (Extensions likely and expected) Start: Immediate IR35 Status: Outside IR35 Rate: Flexible (£35 - £40 per hour +) Responsibilities: Collaborate closely with our client's team to develop and implement electronic solutions in the realm of safety technology. Engage in data Front End entry tasks involving symbols, footprints, and data sheets, ensuring accuracy and completeness. Utilize Altium CAD packages or similar Electronic CAD software proficiently to design and modify electronic components and systems. Conduct thorough checks and verifications of completed work, reporting findings promptly and accurately. Adapt to evolving project requirements and contribute proactively to process improvements. Requirements: Background in electronics with demonstrable experience working with electrical components. Proficiency in Altium CAD packages or similar Electronic CAD software. Familiarity with ERP (Enterprise Resource Planning) or PLM (Product Lifecycle Management) systems is advantageous. Strong attention to detail and a commitment to delivering high-quality work within deadlines. Excellent communication skills and the ability to collaborate effectively within a team environment. Flexibility to work on-site 4 days per week initially, transitioning to 2 days WFH once fully acclimatized with systems and processes. This role offers an exciting opportunity to contribute to cutting-edge safety technology projects and be a pivotal part of our client's dynamic team. Electronics CAD Engineer - Safety Technology (Contract) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
03/05/2024
Project-based
Electronics CAD Engineer - Safety Technology (Contract) CPS Group is seeking an Electronics CAD Engineer to join our esteemed global client based in Kent on an initial 3 - 4+ month contract, outside IR35. There is potential that this contract will be extended to 6 months. Industry: Safety Technology Location: Kent (On-site 4 days per week) Contract Length: Initially 3 - 4 months (Extensions likely and expected) Start: Immediate IR35 Status: Outside IR35 Rate: Flexible (£35 - £40 per hour +) Responsibilities: Collaborate closely with our client's team to develop and implement electronic solutions in the realm of safety technology. Engage in data Front End entry tasks involving symbols, footprints, and data sheets, ensuring accuracy and completeness. Utilize Altium CAD packages or similar Electronic CAD software proficiently to design and modify electronic components and systems. Conduct thorough checks and verifications of completed work, reporting findings promptly and accurately. Adapt to evolving project requirements and contribute proactively to process improvements. Requirements: Background in electronics with demonstrable experience working with electrical components. Proficiency in Altium CAD packages or similar Electronic CAD software. Familiarity with ERP (Enterprise Resource Planning) or PLM (Product Lifecycle Management) systems is advantageous. Strong attention to detail and a commitment to delivering high-quality work within deadlines. Excellent communication skills and the ability to collaborate effectively within a team environment. Flexibility to work on-site 4 days per week initially, transitioning to 2 days WFH once fully acclimatized with systems and processes. This role offers an exciting opportunity to contribute to cutting-edge safety technology projects and be a pivotal part of our client's dynamic team. Electronics CAD Engineer - Safety Technology (Contract) By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
03/05/2024
Full time
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
Are you a talented Hardware Engineer seeking an innovative role in IoT and smart technology? Lynx Recruitment is recruiting for a Senior Hardware Engineer to join our clients' team in Cambridge, UK. You will work in their state-of-the-art office adjacent to the prestigious Cambridge Science Park, with access to prototype labs, equipment and collaboration spaces. As a key member of the hardware team, you will design, develop and test innovative narrowband RF devices and modules. Responsibilities: Support hardware development projects from concept to production Design and layout PCBs, select components, create prototypes Perform testing to verify and validate product performance Execute field trials and manage external test facilities Collaborate with software, operations and test engineers Requirements: Degree in Electronic/Electrical Engineering or similar experience 5+ years hardware design and test experience Knowledge of RF systems, cellular protocols, TCP/IP, etc. Proficiency with Altium, CAD tools and lab equipment Excellent analytical and troubleshooting skills Strong communication and teamwork abilities Our client offers a competitive salary, share options, health insurance, pension contributions and 25 days holiday. If you are seeking to progress your career in IoT/electronics design at an innovative tech company, apply today!
02/05/2024
Full time
Are you a talented Hardware Engineer seeking an innovative role in IoT and smart technology? Lynx Recruitment is recruiting for a Senior Hardware Engineer to join our clients' team in Cambridge, UK. You will work in their state-of-the-art office adjacent to the prestigious Cambridge Science Park, with access to prototype labs, equipment and collaboration spaces. As a key member of the hardware team, you will design, develop and test innovative narrowband RF devices and modules. Responsibilities: Support hardware development projects from concept to production Design and layout PCBs, select components, create prototypes Perform testing to verify and validate product performance Execute field trials and manage external test facilities Collaborate with software, operations and test engineers Requirements: Degree in Electronic/Electrical Engineering or similar experience 5+ years hardware design and test experience Knowledge of RF systems, cellular protocols, TCP/IP, etc. Proficiency with Altium, CAD tools and lab equipment Excellent analytical and troubleshooting skills Strong communication and teamwork abilities Our client offers a competitive salary, share options, health insurance, pension contributions and 25 days holiday. If you are seeking to progress your career in IoT/electronics design at an innovative tech company, apply today!
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
01/05/2024
Project-based
An Electrical/Electronic Engineer is required for a contract assignment with a multi-national leading defence company. Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration c) Reviewing and authoring reports, guidelines and processes d) Design assessments and analysis e) Working to defence/industry standards f) Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: a) Project manage the equipment(s) on behalf of the project during development, qualification and manufacture b) Own the requirements on behalf of the project for the equipment(s) c) Produce Statement(s) of Work for the associated design authority for the equipment(s) d) Create and update plans showing activities for the equipment(s) e) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance f) Hold regular progress reviews with the design authority for the equipment(s) g) Review qualification verification evidence h) Track and find resolution to equipment non-compliances i) Attend and support design reviews Skillset/experience required: Technical experience required: * electrical/electronics * interface definitions * knowledge of defence/industry standards, etc. * degree level qualification in a related subject * systems engineering * writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: * defence * weapon systems * power supplies * actuators * data communication * sensors * EMC * Health Usage Monitoring Systems (HUMS) * Model Based Engineering (MBE) Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
The Opportunity: We're on the lookout for an Intelligent Transport Systems (ITS)/Transport Technology Consultant to assist in the development of highways technology schemes and solutions that will shape the digital roadmap for roadside technology asset improvements and rollouts. You'll operate in a Front End Consultancy role in a client facing position, understanding and analysing their needs, challenges and goals and providing expert advice and recommendations on how to optimize and enhance current and future roadside technology solutions. This role will attract those in Front End ITS Consultancy that want greater autonomy and career opportunities. Likewise it could also suit someone with a scheme design background using motorway technology assets (CCTV/MIDAS/SVD/ERT/MS3/4) and infrastructure. Both types of profile will need exceptional communication (written and verbal) and analytical skills, who can deliver professional consultancy services. Skills and Experience: A degree or equivalent experience in a technology based engineering discipline (electronic/electrical engineering, communications, etc.) Experience of design roadside technology schemes calculations and drawings, along with the ability to communicate these in a non-technical way A broad, but in depth understanding of technology aimed at the transport/mobility sector (sensors, camera, IoT devices, V2I, etc.) Exceptional communication, client/stakeholder management and analytical abilities, with prior client facing experience into transport related public sector bodies (National Highways, TfL, TfGM, etc.) Full UK Driving Licence Please call James Sample here at ISR to learn more
30/04/2024
Full time
The Opportunity: We're on the lookout for an Intelligent Transport Systems (ITS)/Transport Technology Consultant to assist in the development of highways technology schemes and solutions that will shape the digital roadmap for roadside technology asset improvements and rollouts. You'll operate in a Front End Consultancy role in a client facing position, understanding and analysing their needs, challenges and goals and providing expert advice and recommendations on how to optimize and enhance current and future roadside technology solutions. This role will attract those in Front End ITS Consultancy that want greater autonomy and career opportunities. Likewise it could also suit someone with a scheme design background using motorway technology assets (CCTV/MIDAS/SVD/ERT/MS3/4) and infrastructure. Both types of profile will need exceptional communication (written and verbal) and analytical skills, who can deliver professional consultancy services. Skills and Experience: A degree or equivalent experience in a technology based engineering discipline (electronic/electrical engineering, communications, etc.) Experience of design roadside technology schemes calculations and drawings, along with the ability to communicate these in a non-technical way A broad, but in depth understanding of technology aimed at the transport/mobility sector (sensors, camera, IoT devices, V2I, etc.) Exceptional communication, client/stakeholder management and analytical abilities, with prior client facing experience into transport related public sector bodies (National Highways, TfL, TfGM, etc.) Full UK Driving Licence Please call James Sample here at ISR to learn more
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
29/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.