My Client who are a Multinational Defence company are looking to hire an SC Cleared or clearable Senior Hardware Engineer to join their team onsite in Southampton. Main Purpose of the Job To support both new products and in-house test, the client develops electronics for the company's range of detectors. These electronics usually require digitisation of an analogue signal and data processing of the digitised stream. An FPGA is usually used as the timing and data processing engine. The Client are going through a significant and exciting period of new cutting-edge product development and require additional resource to support this activity, specifically in the area of the development of test system electronics. Key Responsibilities Requirements capture and generating design specifications Electronics schematic design, layout, and simulation Validation of designs against requirements Definition of test parameters Integration and validation at system level Preparation of technical documentation and reports Adherence to company governance and quality processes Key Skills and Experience required Essential Degree in Electronics Engineering (or equivalent) Management of electronics design projects to achieve requirements within cost and time Use of Schematic Capture tools (Mentor Graphics, Proteus or equivalent) Ability to communicate technical information within the company Demonstrate evidence of good organisation, planning, cost control and execution of work Ability to work in a team with other engineering and science disciplines Good Communication and customer liaison skills
02/04/2025
Project-based
My Client who are a Multinational Defence company are looking to hire an SC Cleared or clearable Senior Hardware Engineer to join their team onsite in Southampton. Main Purpose of the Job To support both new products and in-house test, the client develops electronics for the company's range of detectors. These electronics usually require digitisation of an analogue signal and data processing of the digitised stream. An FPGA is usually used as the timing and data processing engine. The Client are going through a significant and exciting period of new cutting-edge product development and require additional resource to support this activity, specifically in the area of the development of test system electronics. Key Responsibilities Requirements capture and generating design specifications Electronics schematic design, layout, and simulation Validation of designs against requirements Definition of test parameters Integration and validation at system level Preparation of technical documentation and reports Adherence to company governance and quality processes Key Skills and Experience required Essential Degree in Electronics Engineering (or equivalent) Management of electronics design projects to achieve requirements within cost and time Use of Schematic Capture tools (Mentor Graphics, Proteus or equivalent) Ability to communicate technical information within the company Demonstrate evidence of good organisation, planning, cost control and execution of work Ability to work in a team with other engineering and science disciplines Good Communication and customer liaison skills
Seeking an experienced Security Cleared (SC) Lead Configuration Engineer preferably within the Defence and Aerospace Sector. You will oversee Configuration & Data Management (C&DM) activities across programme life cycles, ensuring compliance with processes and tools at system, software, modelling, and hardware levels. Key Responsibilities Drive proactive C&DM engagement in Integrated Project Teams (IPTs). Provide direction on C&DM processes, tailoring them to project needs. Lead and manage C&DM teams to deliver work packages on time and within budget. Coach, mentor, and train IPT members on C&DM best practices. Resolve C&DM issues and contribute to business-wide process improvements. Maintain and control project datasets, ensuring configuration integrity. Manage customer and supplier relationships effectively. Essential Skills & Experience Strong understanding of Configuration Management (DEF STAN 05-57) . Proficiency in key CM elements: Planning, Identification, Change Management, Status Accounting, and Audit/Verification . Experience with safety-critical product development . Practical knowledge of CM2 methodology (preferred) . Familiarity with Product Lifecycle Management tools (eg, Teamcenter v13, SAP). Strong administrative skills with high attention to detail and logical thinking. Additional Requirements Experience leading Change Control Boards and Configuration Audits Due to the nature of the project, the successful candidate will have a valid UK Security Clearance before the start.
02/04/2025
Project-based
Seeking an experienced Security Cleared (SC) Lead Configuration Engineer preferably within the Defence and Aerospace Sector. You will oversee Configuration & Data Management (C&DM) activities across programme life cycles, ensuring compliance with processes and tools at system, software, modelling, and hardware levels. Key Responsibilities Drive proactive C&DM engagement in Integrated Project Teams (IPTs). Provide direction on C&DM processes, tailoring them to project needs. Lead and manage C&DM teams to deliver work packages on time and within budget. Coach, mentor, and train IPT members on C&DM best practices. Resolve C&DM issues and contribute to business-wide process improvements. Maintain and control project datasets, ensuring configuration integrity. Manage customer and supplier relationships effectively. Essential Skills & Experience Strong understanding of Configuration Management (DEF STAN 05-57) . Proficiency in key CM elements: Planning, Identification, Change Management, Status Accounting, and Audit/Verification . Experience with safety-critical product development . Practical knowledge of CM2 methodology (preferred) . Familiarity with Product Lifecycle Management tools (eg, Teamcenter v13, SAP). Strong administrative skills with high attention to detail and logical thinking. Additional Requirements Experience leading Change Control Boards and Configuration Audits Due to the nature of the project, the successful candidate will have a valid UK Security Clearance before the start.
My Client who are a large Multinational Defence company are looking to recruit a number of Contract engineers to perform various engineering activities across their many disciplines. One such discipline is for a Principal Firmware Engineer. As a Firmware engineer will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. What you really must have: Design tools such as Xilinx, TCL, Verilog, System Verilog and UVM FPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel). Fast interfaces such as PCIe, Ethernet, and JESD is also required. Auto-generated code using model driven engineering using Matlab and Simulink tools Derivation of detailed Firmware requirements and architecture from system requirements A structured approach to firmware design (RTCA DO-254 or similar) Cryptography and anti-tamper techniques Artificial Intelligence including machine learning and genetic algorithms Electronics test methods and equipment Good verbal and written communication skills Working in mixed discipline teams HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or Applied Physics) or you may just have lots of skills and experience gained through your hard work. Due to the nature of our work, any candidate must have 5 years UK residency and be capable of achieving full SC security clearance.
01/04/2025
Project-based
My Client who are a large Multinational Defence company are looking to recruit a number of Contract engineers to perform various engineering activities across their many disciplines. One such discipline is for a Principal Firmware Engineer. As a Firmware engineer will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. What you really must have: Design tools such as Xilinx, TCL, Verilog, System Verilog and UVM FPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel). Fast interfaces such as PCIe, Ethernet, and JESD is also required. Auto-generated code using model driven engineering using Matlab and Simulink tools Derivation of detailed Firmware requirements and architecture from system requirements A structured approach to firmware design (RTCA DO-254 or similar) Cryptography and anti-tamper techniques Artificial Intelligence including machine learning and genetic algorithms Electronics test methods and equipment Good verbal and written communication skills Working in mixed discipline teams HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or Applied Physics) or you may just have lots of skills and experience gained through your hard work. Due to the nature of our work, any candidate must have 5 years UK residency and be capable of achieving full SC security clearance.
Systems Engineer Location: Luton (90% site-based) Start Date: ASAP Clearance: UK Security Clearance (SC) and authorised to access UK-Eyes-Only material IR35 Status: INSIDE IR35 (Must operate through an FCSA Accredited Umbrella) 37 hours per week Contract Length: 12 months The Opportunity Our client is seeking a skilled Contract Engineer to join a Combat Air division, contributing to the development of Typhoon Defensive Aids Systems . This role offers hands-on exposure to cutting-edge Electronic Warfare (EW) products and the opportunity to collaborate with subject-matter experts in the field. Due to the nature of the work, this position requires 80-100% on-site presence (minimum four days per week) at the client's Luton site. Key Responsibilities Engage with stakeholders to define requirements for new system developments. Conduct cost and functional performance trade-offs and evaluate proposed solutions. Design and integrate new functionality into an existing system. Model system performance to understand and validate simulated outputs. Develop capabilities within the constraints of the target hardware. Create Test Plans and Requirements for Verification and Validation (V&V) of sub-systems. Define Integration Plans for unit integration into the full system. Lead technical discussions with suppliers and customers. Manage technical documentation to support design review activities . What We're Looking For Strong knowledge of the systems engineering life cycle , particularly in: Problem definition Systems Architecture Systems Modelling and Analysis Integration, Verification, and Validation (IVV) Model-Based Systems Engineering (MBSE) Excellent interpersonal skills to drive technical discussions and steer decision-making. Experience with Product Data Management tools (eg, Teamcenter, SharePoint, Confluence). A self-motivated problem solver with the ability to drive complex issues to resolution. Strong written, verbal, and presentation skills. Ability to obtain SC Clearance for UK-caveated programmes. If you're a motivated Systems Engineer looking to make an impact in a high-tech, defence-focused environment, we want to hear from you.
01/04/2025
Project-based
Systems Engineer Location: Luton (90% site-based) Start Date: ASAP Clearance: UK Security Clearance (SC) and authorised to access UK-Eyes-Only material IR35 Status: INSIDE IR35 (Must operate through an FCSA Accredited Umbrella) 37 hours per week Contract Length: 12 months The Opportunity Our client is seeking a skilled Contract Engineer to join a Combat Air division, contributing to the development of Typhoon Defensive Aids Systems . This role offers hands-on exposure to cutting-edge Electronic Warfare (EW) products and the opportunity to collaborate with subject-matter experts in the field. Due to the nature of the work, this position requires 80-100% on-site presence (minimum four days per week) at the client's Luton site. Key Responsibilities Engage with stakeholders to define requirements for new system developments. Conduct cost and functional performance trade-offs and evaluate proposed solutions. Design and integrate new functionality into an existing system. Model system performance to understand and validate simulated outputs. Develop capabilities within the constraints of the target hardware. Create Test Plans and Requirements for Verification and Validation (V&V) of sub-systems. Define Integration Plans for unit integration into the full system. Lead technical discussions with suppliers and customers. Manage technical documentation to support design review activities . What We're Looking For Strong knowledge of the systems engineering life cycle , particularly in: Problem definition Systems Architecture Systems Modelling and Analysis Integration, Verification, and Validation (IVV) Model-Based Systems Engineering (MBSE) Excellent interpersonal skills to drive technical discussions and steer decision-making. Experience with Product Data Management tools (eg, Teamcenter, SharePoint, Confluence). A self-motivated problem solver with the ability to drive complex issues to resolution. Strong written, verbal, and presentation skills. Ability to obtain SC Clearance for UK-caveated programmes. If you're a motivated Systems Engineer looking to make an impact in a high-tech, defence-focused environment, we want to hear from you.
Start Date: ASAP Location: Luton (90% site-based) Clearance: UK Security Clearance (SC) and authorisation to access UK-Eyes-Only material IR35 Status: Inside IR35 (Must operate through FCSA Accredited Umbrella) 37 hours per week Role Overview An exciting opportunity has arisen for a Contract Engineer to join a team within the Combat Air sector for a 12-month contract. The role involves working as part of a modelling and simulation team, supporting the development of Model-Based Systems Engineering (MBSE) for platforms such as Tempest and Typhoon. Due to the nature of the work, this role requires 80-100% (4 days per week) on-site presence in Luton. This position will provide exposure to advanced Electronic Warfare (EW) products and opportunities to collaborate with subject-matter experts across multiple domains, products, and technology fields. Key Responsibilities Baselined updates and releases of models within CAMEO, including source control, design documentation, and user guides. Development of systems engineering plans, analysis, and trade study reports, contributing to system performance assessments. Maintain and update Hazard Logs, Security Risk Mitigation records, and Technical Risk Lists within the model. Manage and generate documentation from the module, including Architecture Description Documents, Interface Control Documents, and Requirement Traceability Reports. Propose high-level architecture roadmaps and methodologies for development in line with programme deliverables. Review proposed architecture models and provide technical input. Offer expertise on system security requirements, architecture, and design considerations. Develop candidate security architectures in response to specified security requirements. Support Secure by Design processes through threat assessments, risk management, and security control development. Required Skills & Experience Proven expertise in Simulation and Modelling using Matlab and SysML/CAMEO. Strong knowledge of system architecture development. Understanding of security aspects including Information Warfare, Networks, Cryptography, and System Vulnerabilities. Strong interpersonal skills with the ability to contribute to technical discussions and exchanges. Experience in Product Data Management using Teamcenter, SharePoint, or Confluence. Self-motivated, problem-solving mindset with the ability to drive complex issues to resolution. Excellent written, verbal, and presentation skills. Ability to obtain SC Clearance for UK-caveated programmes. This role offers a unique opportunity to contribute to cutting-edge aerospace and defence projects in a highly technical and collaborative environment.
01/04/2025
Project-based
Start Date: ASAP Location: Luton (90% site-based) Clearance: UK Security Clearance (SC) and authorisation to access UK-Eyes-Only material IR35 Status: Inside IR35 (Must operate through FCSA Accredited Umbrella) 37 hours per week Role Overview An exciting opportunity has arisen for a Contract Engineer to join a team within the Combat Air sector for a 12-month contract. The role involves working as part of a modelling and simulation team, supporting the development of Model-Based Systems Engineering (MBSE) for platforms such as Tempest and Typhoon. Due to the nature of the work, this role requires 80-100% (4 days per week) on-site presence in Luton. This position will provide exposure to advanced Electronic Warfare (EW) products and opportunities to collaborate with subject-matter experts across multiple domains, products, and technology fields. Key Responsibilities Baselined updates and releases of models within CAMEO, including source control, design documentation, and user guides. Development of systems engineering plans, analysis, and trade study reports, contributing to system performance assessments. Maintain and update Hazard Logs, Security Risk Mitigation records, and Technical Risk Lists within the model. Manage and generate documentation from the module, including Architecture Description Documents, Interface Control Documents, and Requirement Traceability Reports. Propose high-level architecture roadmaps and methodologies for development in line with programme deliverables. Review proposed architecture models and provide technical input. Offer expertise on system security requirements, architecture, and design considerations. Develop candidate security architectures in response to specified security requirements. Support Secure by Design processes through threat assessments, risk management, and security control development. Required Skills & Experience Proven expertise in Simulation and Modelling using Matlab and SysML/CAMEO. Strong knowledge of system architecture development. Understanding of security aspects including Information Warfare, Networks, Cryptography, and System Vulnerabilities. Strong interpersonal skills with the ability to contribute to technical discussions and exchanges. Experience in Product Data Management using Teamcenter, SharePoint, or Confluence. Self-motivated, problem-solving mindset with the ability to drive complex issues to resolution. Excellent written, verbal, and presentation skills. Ability to obtain SC Clearance for UK-caveated programmes. This role offers a unique opportunity to contribute to cutting-edge aerospace and defence projects in a highly technical and collaborative environment.
Job Title: SC Cleared Interaction Designer Duration: Initial 3 + months Location: UK Remote (Occasional site visits if needed) Security Clearance: Due to the nature of the project, active SC Clearance will be required prior to the start Job Description: We seek experienced SC Cleared Interaction Designers to support a high-profile government project. This role is inside IR35 and offers a remote-first approach, with occasional site visits if required. The ideal candidates will have expertise in User-Centred Design (UCD) and will be responsible for creating intuitive, accessible, and effective digital services. You will work closely with User Researchers, Service Designers, Developers, and Product Managers to design solutions that meet both user and business needs while aligning with GDS (Government Digital Service) standards . Key Responsibilities: Design accessible and user-friendly interfaces for government digital services. Work within agile teams to create prototypes, wireframes, and user flows. Apply User-Centred Design (UCD) methodologies to iterate and refine designs based on research and feedback. Ensure services align with GDS (Government Digital Service) guidelines and accessibility standards. Collaborate with User Researchers to translate insights into impactful design solutions. Present and communicate design decisions to stakeholders. Contribute to the development of design patterns and standards within the team. Requirements: Proven experience (5 years +) as an Interaction Designer in government or public sector projects. Strong knowledge of User-Centred Design (UCD) methodologies and GDS service design principles . Expertise in wireframing, prototyping, and interaction design tools such as Figma, Sketch, or Axure. Understanding of accessibility best practices (WCAG). Ability to work collaboratively in an agile environment. Excellent communication and stakeholder engagement skills.
27/03/2025
Project-based
Job Title: SC Cleared Interaction Designer Duration: Initial 3 + months Location: UK Remote (Occasional site visits if needed) Security Clearance: Due to the nature of the project, active SC Clearance will be required prior to the start Job Description: We seek experienced SC Cleared Interaction Designers to support a high-profile government project. This role is inside IR35 and offers a remote-first approach, with occasional site visits if required. The ideal candidates will have expertise in User-Centred Design (UCD) and will be responsible for creating intuitive, accessible, and effective digital services. You will work closely with User Researchers, Service Designers, Developers, and Product Managers to design solutions that meet both user and business needs while aligning with GDS (Government Digital Service) standards . Key Responsibilities: Design accessible and user-friendly interfaces for government digital services. Work within agile teams to create prototypes, wireframes, and user flows. Apply User-Centred Design (UCD) methodologies to iterate and refine designs based on research and feedback. Ensure services align with GDS (Government Digital Service) guidelines and accessibility standards. Collaborate with User Researchers to translate insights into impactful design solutions. Present and communicate design decisions to stakeholders. Contribute to the development of design patterns and standards within the team. Requirements: Proven experience (5 years +) as an Interaction Designer in government or public sector projects. Strong knowledge of User-Centred Design (UCD) methodologies and GDS service design principles . Expertise in wireframing, prototyping, and interaction design tools such as Figma, Sketch, or Axure. Understanding of accessibility best practices (WCAG). Ability to work collaboratively in an agile environment. Excellent communication and stakeholder engagement skills.