Design Lead (Transmission Infrastructure) INSIDE IR35 Scotland based (50/50 onsite/wfh) 6 months ASAP Start We are currently recruiting for a Design Lead for a transmission engineering project, who can conduct the following responsibilities: Drive the project team in the development and delivery of projects across transmission providing leadership, co-ordination, and ownership of interfaces between multiple technical disciplines where required. Build strong rapport and relationships, with various internal and external stakeholders to support the sustainable delivery of the projects. Work closely with engineers and managers to ensure engineering design risks are identified with solutions. Prepare and co-ordinate design assurance reviews. Drive design maturity and delivery of scope to required quality and programme. Essential Skills/Experience: Transmission experience in either Civil or Line Engineering Degree quailed or similar in engineering discipline. Transmission infrastructure experience. Worked in substation construction, line, or cable. Previous project experience working as Design Lead. IND_PC2 Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
28/03/2024
Project-based
Design Lead (Transmission Infrastructure) INSIDE IR35 Scotland based (50/50 onsite/wfh) 6 months ASAP Start We are currently recruiting for a Design Lead for a transmission engineering project, who can conduct the following responsibilities: Drive the project team in the development and delivery of projects across transmission providing leadership, co-ordination, and ownership of interfaces between multiple technical disciplines where required. Build strong rapport and relationships, with various internal and external stakeholders to support the sustainable delivery of the projects. Work closely with engineers and managers to ensure engineering design risks are identified with solutions. Prepare and co-ordinate design assurance reviews. Drive design maturity and delivery of scope to required quality and programme. Essential Skills/Experience: Transmission experience in either Civil or Line Engineering Degree quailed or similar in engineering discipline. Transmission infrastructure experience. Worked in substation construction, line, or cable. Previous project experience working as Design Lead. IND_PC2 Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Position Available : Systems Engineer (Electro-Optics Systems) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices and similar. Knowledge of the physics and technologies involved in Electro-Optical systems would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on Electro-Optics (EO) technologies through the provision of specialist EO design support. You will be responsible for driving the technical direction of our products to meet challenging customer requirements by engaging and coordinating with wider specialist design teams and external entities to ensure we successfully deliver on our commitments. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: Requirements analysis, specifications and justification System architecture design and modelling System trade studies to inform design decisions Technology maturation assessments and FMEA Development of interface definitions Systems proving, design assurance and certification Any experience in the following would be a bonus: Knowledge of the physics and technologies involved in Electro-Optical systems Experience of model based engineering techniques, including SysML Use of systems engineering tools (eg IBM DOORS Next, Rhapsody, etc) If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Systems Engineer (Electro-Optics Systems) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices and similar. Knowledge of the physics and technologies involved in Electro-Optical systems would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on Electro-Optics (EO) technologies through the provision of specialist EO design support. You will be responsible for driving the technical direction of our products to meet challenging customer requirements by engaging and coordinating with wider specialist design teams and external entities to ensure we successfully deliver on our commitments. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: Requirements analysis, specifications and justification System architecture design and modelling System trade studies to inform design decisions Technology maturation assessments and FMEA Development of interface definitions Systems proving, design assurance and certification Any experience in the following would be a bonus: Knowledge of the physics and technologies involved in Electro-Optical systems Experience of model based engineering techniques, including SysML Use of systems engineering tools (eg IBM DOORS Next, Rhapsody, etc) If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Electro-Optics Systems) Location : Bristol (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices and similar. Knowledge of the physics and technologies involved in Electro-Optical systems would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on Electro-Optics (EO) technologies through the provision of specialist EO design support. You will be responsible for driving the technical direction of our products to meet challenging customer requirements by engaging and coordinating with wider specialist design teams and external entities to ensure we successfully deliver on our commitments. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: Requirements analysis, specifications and justification System architecture design and modelling System trade studies to inform design decisions Technology maturation assessments and FMEA Development of interface definitions Systems proving, design assurance and certification Any experience in the following would be a bonus: Knowledge of the physics and technologies involved in Electro-Optical systems Experience of model based engineering techniques, including SysML Use of systems engineering tools (eg IBM DOORS Next, Rhapsody, etc) If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Systems Engineer (Electro-Optics Systems) Location : Bristol (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices and similar. Knowledge of the physics and technologies involved in Electro-Optical systems would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on Electro-Optics (EO) technologies through the provision of specialist EO design support. You will be responsible for driving the technical direction of our products to meet challenging customer requirements by engaging and coordinating with wider specialist design teams and external entities to ensure we successfully deliver on our commitments. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: Requirements analysis, specifications and justification System architecture design and modelling System trade studies to inform design decisions Technology maturation assessments and FMEA Development of interface definitions Systems proving, design assurance and certification Any experience in the following would be a bonus: Knowledge of the physics and technologies involved in Electro-Optical systems Experience of model based engineering techniques, including SysML Use of systems engineering tools (eg IBM DOORS Next, Rhapsody, etc) If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Modelling & Tools Team Lead) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics and similar. We are looking for someone with a background in mathematical modelling and coding using tools such as MATLAB and Simulink who also has experience in model verification & validation, configuration control and release processes. Any prior experience of leading a team would be a bonus, although not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to join our Electro-Optical (EO) Seekers & Sensors Department as the Lead for our Modelling and Tools team. The work is broad, multifaceted, varied and dynamically changing. You will work within a highly skilled and experienced team that will support you in delivering our commitments. We will work with you to develop your skill, knowledge and experience, as well as supporting your professional development, all while ensuring a good work-life balance. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Mathematics, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: A background in mathematical modelling and coding using tools such as MathWorks MATLAB and Simulink Experience in model verification & validation, configuration control and release processes. Strong logical and analytical skills to address the technical nature of the work Team Leadership and People Management skills, or a desire to take on this responsibility Additionally, any of the following would be advantageous: Understanding of Electro-Optical radiation, propagation and detection principles, in particular in the infra-red waveband Experience of managing engineering work packages to deliver value outcomes, including co-ordination of other engineering disciplines and subject matter experts Experience of working in AGILE teams and applying AGILE frameworks If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Systems Engineer (Modelling & Tools Team Lead) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics and similar. We are looking for someone with a background in mathematical modelling and coding using tools such as MATLAB and Simulink who also has experience in model verification & validation, configuration control and release processes. Any prior experience of leading a team would be a bonus, although not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to join our Electro-Optical (EO) Seekers & Sensors Department as the Lead for our Modelling and Tools team. The work is broad, multifaceted, varied and dynamically changing. You will work within a highly skilled and experienced team that will support you in delivering our commitments. We will work with you to develop your skill, knowledge and experience, as well as supporting your professional development, all while ensuring a good work-life balance. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Mathematics, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: A background in mathematical modelling and coding using tools such as MathWorks MATLAB and Simulink Experience in model verification & validation, configuration control and release processes. Strong logical and analytical skills to address the technical nature of the work Team Leadership and People Management skills, or a desire to take on this responsibility Additionally, any of the following would be advantageous: Understanding of Electro-Optical radiation, propagation and detection principles, in particular in the infra-red waveband Experience of managing engineering work packages to deliver value outcomes, including co-ordination of other engineering disciplines and subject matter experts Experience of working in AGILE teams and applying AGILE frameworks If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Sensors & Navigation) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Systems Engineer (Sensors & Navigation) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position : Customs Officer Location : Hertfordshire (Dynamic Working Hours) Salary : Up to £40,000 + Company Bonus & Paid Overtime Experience : Experience in technical/practical aspects of Import & Export Customs procedures and knowledge of customs special procedures, specifically IPR & Customs warehousing. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have an opening for an experienced Customs Officer who will be tasked with overseeing Customs Warehousing and IPR processes. This role is crucial for ensuring our compliance with HMRC regulations and is well-suited for individuals who enjoy tackling challenges. In this position, attention to detail is essential, and you'll have the opportunity to contribute to ongoing improvements within the department. What we need from you: Experience in technical and practical aspects of Import and Export Customs procedures Knowledge of customs special procedures, specifically IPR and Customs warehousing A detailed knowledge of all fields on a CHIEF or CDS customs entry A working knowledge and understanding of Tariff Codes and Customs Procedure Codes A working knowledge of the rules of origin Capability to produce professional and concise documentation A working knowledge in supervising a Customs warehouse would be a bonus, but not essential If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position : Customs Officer Location : Hertfordshire (Dynamic Working Hours) Salary : Up to £40,000 + Company Bonus & Paid Overtime Experience : Experience in technical/practical aspects of Import & Export Customs procedures and knowledge of customs special procedures, specifically IPR & Customs warehousing. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We currently have an opening for an experienced Customs Officer who will be tasked with overseeing Customs Warehousing and IPR processes. This role is crucial for ensuring our compliance with HMRC regulations and is well-suited for individuals who enjoy tackling challenges. In this position, attention to detail is essential, and you'll have the opportunity to contribute to ongoing improvements within the department. What we need from you: Experience in technical and practical aspects of Import and Export Customs procedures Knowledge of customs special procedures, specifically IPR and Customs warehousing A detailed knowledge of all fields on a CHIEF or CDS customs entry A working knowledge and understanding of Tariff Codes and Customs Procedure Codes A working knowledge of the rules of origin Capability to produce professional and concise documentation A working knowledge in supervising a Customs warehouse would be a bonus, but not essential If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
We are Global IT Recruitment specialist that provides support to the clients across UK, Europe and Australia. We have an excellent job opportunity for you. Job Title: General Black Hat Supervisor- Mech Duration: 6 months Location: Bridgwater, Somerset Job Description: The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on client site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks, on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (Client Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the Client Principal Contractor and their other tier 1 contractors Act as and Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and experiences Client experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Qualifications Essential Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician; Engineering Fitter; Metal Fabricator; Project Controls Technician Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (Client specific training) CCNSG TMIC trained (First Aid at Work trained) IC trained TMIC trained (First Aid at Work trained) IC trained Qualifications required ideally experience on Client one of A,B,C & D One of the following from A or All of B and one of the following from C and D: A Level 3 Apprenticeship: - Engineering Construction - Pipefitting Standard or Mechanical or Plating; - Maintenance and Operations Engineering Technician; - Engineering Fitter; - Metal Fabricator; - Project Controls Technician Certificate of Apprenticeship in Plating ACE Card demonstrating Level 3 Diploma in any of the following disciplines: Pipefitting, Mechanical, Plating, Fabricator, B B0 H0/CSQ/SCNI/M1/HN1 large component replacement or HN1 reactor opening and closing (OFC) C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely Background Experience in managing people on large scale/international projects
28/03/2024
Project-based
We are Global IT Recruitment specialist that provides support to the clients across UK, Europe and Australia. We have an excellent job opportunity for you. Job Title: General Black Hat Supervisor- Mech Duration: 6 months Location: Bridgwater, Somerset Job Description: The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on client site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks, on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (Client Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the Client Principal Contractor and their other tier 1 contractors Act as and Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and experiences Client experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Qualifications Essential Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician; Engineering Fitter; Metal Fabricator; Project Controls Technician Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (Client specific training) CCNSG TMIC trained (First Aid at Work trained) IC trained TMIC trained (First Aid at Work trained) IC trained Qualifications required ideally experience on Client one of A,B,C & D One of the following from A or All of B and one of the following from C and D: A Level 3 Apprenticeship: - Engineering Construction - Pipefitting Standard or Mechanical or Plating; - Maintenance and Operations Engineering Technician; - Engineering Fitter; - Metal Fabricator; - Project Controls Technician Certificate of Apprenticeship in Plating ACE Card demonstrating Level 3 Diploma in any of the following disciplines: Pipefitting, Mechanical, Plating, Fabricator, B B0 H0/CSQ/SCNI/M1/HN1 large component replacement or HN1 reactor opening and closing (OFC) C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely Background Experience in managing people on large scale/international projects
I am working with a company in North Yorkshire that are leading the way with Offshore and Drilling equipment. The client focuses on critical equipment used on the drilling rig, for flow control and to support offshore and subsea operations. Our client is looking for an Electrical Design Engineer for a 6 month contract with a potential extension. This role is outside IR35. The ideal Electrical Design Engineer will have subsea/renewables experience and a strong background in EC&I. Requirements: 5+ years of experience in electrical design Experience in AutoCAD, AutoCAD Electrical, E-Plan Electrical schematic drawing Knowledge of the offshore/subsea engineering industry is beneficial but not essential Knowledge of HV and LV systems Variable drive systems knowledge is beneficial but not essential If you are interested and looking for your next contract, please send over your up-to-date CV and I will give you a call. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
28/03/2024
Project-based
I am working with a company in North Yorkshire that are leading the way with Offshore and Drilling equipment. The client focuses on critical equipment used on the drilling rig, for flow control and to support offshore and subsea operations. Our client is looking for an Electrical Design Engineer for a 6 month contract with a potential extension. This role is outside IR35. The ideal Electrical Design Engineer will have subsea/renewables experience and a strong background in EC&I. Requirements: 5+ years of experience in electrical design Experience in AutoCAD, AutoCAD Electrical, E-Plan Electrical schematic drawing Knowledge of the offshore/subsea engineering industry is beneficial but not essential Knowledge of HV and LV systems Variable drive systems knowledge is beneficial but not essential If you are interested and looking for your next contract, please send over your up-to-date CV and I will give you a call. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
Contract Fault Management Quality Engineer 16-Month Contract £286 per day Oxford I am urgently looking for Contract Fault Management Quality Engineer to join one of the UK's leading Automotive manufacturers as a key link in supplier relationship between the supplier and end client. This is for a long-term contract which allow you to join the New Product Quality team. Engage in critical areas of product development, including pre-production build events, material quality standard development, and the Faults Management Process. Responsibilities Drive quality faults reduction in new design. Coordinate the Faults Management process, ensuring robust conversion of Quality Notifications (QN) to Quality Concern Reports (QCR). Own project specific KPI reporting to ensure adherence to parameters at each project gateway. Manage Faults Management meetings and process ownership. Develop reporting metrics using PowerBi and contribute to continuous improvement initiatives. Create project quality targets and oversee the Product Audit tracker for project delivery. Support the delivery of the quality control plan for each project, ensuring holistic project planning and alignment across relevant quality functions. Requirements Comprehensive knowledge of automotive manufacturing or similar industry. Experience in New Product Development within the Automotive Industry. Proficiency in 8D or Practical Problem Solving (PPS). Understanding of engineering drawings and statistical analysis (SPC). Familiarity with FMEA and Design for Manufacture. Project management skills with the ability to lead cross-functional teams. The client is interviewing from next week with an immediate start so if you have the relevant experience, please send across your most up to date CV for review.
28/03/2024
Project-based
Contract Fault Management Quality Engineer 16-Month Contract £286 per day Oxford I am urgently looking for Contract Fault Management Quality Engineer to join one of the UK's leading Automotive manufacturers as a key link in supplier relationship between the supplier and end client. This is for a long-term contract which allow you to join the New Product Quality team. Engage in critical areas of product development, including pre-production build events, material quality standard development, and the Faults Management Process. Responsibilities Drive quality faults reduction in new design. Coordinate the Faults Management process, ensuring robust conversion of Quality Notifications (QN) to Quality Concern Reports (QCR). Own project specific KPI reporting to ensure adherence to parameters at each project gateway. Manage Faults Management meetings and process ownership. Develop reporting metrics using PowerBi and contribute to continuous improvement initiatives. Create project quality targets and oversee the Product Audit tracker for project delivery. Support the delivery of the quality control plan for each project, ensuring holistic project planning and alignment across relevant quality functions. Requirements Comprehensive knowledge of automotive manufacturing or similar industry. Experience in New Product Development within the Automotive Industry. Proficiency in 8D or Practical Problem Solving (PPS). Understanding of engineering drawings and statistical analysis (SPC). Familiarity with FMEA and Design for Manufacture. Project management skills with the ability to lead cross-functional teams. The client is interviewing from next week with an immediate start so if you have the relevant experience, please send across your most up to date CV for review.
Senior Development Manager Job title: Senior Development Manager Report to: Managing Director Salary: Dependent on experience Department: Development Location: Hybrid but southwest based, ideally in Bristol or Bath area. Responsible for: To be discussed as potentially overseeing others within development project team from time to time Purpose and objectives of the role This role is critical in supporting our clients in the delivery of community scale (1MW-20MW) ground mount solar and wind turbine projects. The candidate will have experience in the development of similar scale renewable energy projects, including specific experience in wind development. Our clients are based across the Southwest of England and Wales and frequent travel will be essential. We work with a mix of Commercial and Community organisations to support the UKs transition to Net Zero and this role will include community energy development projects. Main duties and responsibilities Coordinating all aspects of the project development, drawing in relevant external support and experts when necessary. Supporting the existing team to bring on new sites into the project pipeline Supporting training and managing others within the team where relevant Updating financial models for potential sites and liaising with our community energy clients. Meeting with landowners and other representatives to facilitate the negotiation and progression of terms. Managing the Planning Application process Procurement and coordination of necessary contractors Support the project management process during delivery where necessary Minimum requirements • UK drivers' licence • Permission to work in the UK. • Experience developing 1MW+ wind projects successfully • Minimum 5 years renewable energy development experience • Experience working with and engaging community stakeholders • Solid understanding of the planning process • Solid presentation, written and numeracy skills and comfortable using software packages and excel Desirable requirements • Experience in community energy project development • Examples of successful wind projects • Renewable energy, electrical or engineering related qualification and training • Experience in ecology or biodiversity projects • Experience training and managing people • Experience designing wind projects and user of specific industry wind and solar software If you would like to apply for the role, please contact John and apply with a CV at -
28/03/2024
Full time
Senior Development Manager Job title: Senior Development Manager Report to: Managing Director Salary: Dependent on experience Department: Development Location: Hybrid but southwest based, ideally in Bristol or Bath area. Responsible for: To be discussed as potentially overseeing others within development project team from time to time Purpose and objectives of the role This role is critical in supporting our clients in the delivery of community scale (1MW-20MW) ground mount solar and wind turbine projects. The candidate will have experience in the development of similar scale renewable energy projects, including specific experience in wind development. Our clients are based across the Southwest of England and Wales and frequent travel will be essential. We work with a mix of Commercial and Community organisations to support the UKs transition to Net Zero and this role will include community energy development projects. Main duties and responsibilities Coordinating all aspects of the project development, drawing in relevant external support and experts when necessary. Supporting the existing team to bring on new sites into the project pipeline Supporting training and managing others within the team where relevant Updating financial models for potential sites and liaising with our community energy clients. Meeting with landowners and other representatives to facilitate the negotiation and progression of terms. Managing the Planning Application process Procurement and coordination of necessary contractors Support the project management process during delivery where necessary Minimum requirements • UK drivers' licence • Permission to work in the UK. • Experience developing 1MW+ wind projects successfully • Minimum 5 years renewable energy development experience • Experience working with and engaging community stakeholders • Solid understanding of the planning process • Solid presentation, written and numeracy skills and comfortable using software packages and excel Desirable requirements • Experience in community energy project development • Examples of successful wind projects • Renewable energy, electrical or engineering related qualification and training • Experience in ecology or biodiversity projects • Experience training and managing people • Experience designing wind projects and user of specific industry wind and solar software If you would like to apply for the role, please contact John and apply with a CV at -
Quality Assurance Manager (m/w/d) - GMP/Qualitätssicherung/Studium/Englisch/TrackWise Projekt : Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Basel suchen wir einen Quality Assurance Manager (m/w/d) Hintergrund : Basel Drug Subtance gliedert sich in vier Value Streams gemäss der vier Produktionstechnolgien am Standort: Monoclonal Antibodies (klassische Fermentation in Stahlreaktoren), Single-Use Technology (Fermentation in Einmal-Behältern), Antibody Drug Conjugates und Small Molecules. Als Quality Assurance Manager bei Basel Drug Substance trägt man zu einer adäquaten Quality Oversight über die vier Value Streams bei. Die Person ist verantwortlich für die Einhaltung und ständige Verbesserung des Qualitätssystems unter Berücksichtigung der aktuellen gesetzlichen und Roche-internen Anforderungen. Man unterstützt oder übernimmt Aufgaben und Projekte in einem der drei Quality Operations Chapter (MAB, SUT, ADC&SM). Als Quality Assurance Manager arbeitet man sich in neue Themenbereiche ein, erweitert ihr Netzwerk und trägt durch ihre wechselnden Einsatzgebiete zur Harmonisierung und Optimierung unserer Prozesse bei. Der oder die perfekte Kandidat:in hat ein abgeschlossenes Studium im naturwissenschaftlichen oder technischen Bereich und bringt bereits Berufserfahrung in der Qualitätssicherung in einem GMP regulierten Unternehmen mit. Die Person verfügt zudem über Erfahrung im pharmazeutischen Umfeld. Aufgaben : * Man wird in einem der drei Quality Chapter eingesetzt und eignet sich das dort erforderliche Wissen an * Ansprechpartner der Produktionsbetriebe in allen Qualitätsbelangen * Sicherstellung von Quality Oversight und GMP-Compliance bei allen betreuten Produktionen und Projekten und Überwachung der Einhaltung der internen Vorgabedokumente * Überprüfung, Beurteilung und Genehmigung der Herstelldokumentation (Batch Record Review) auf Papier und innerhalb des elektronischen Manufacturing Execution Systems (MES) * Freigabe der hergestellten Wirkstoffe * Initiierung, Bearbeitung, Beurteilung und Genehmigung der Abweichungen (Deviations), Korrektur-und Präventionsmassnahmen (CAPAs) und technische Änderungsanträge (Changes) * Erstellung, Prüfung und Genehmigung GMP-Dokumente * Durchführung der Qualitätsbegehungen und Selbstinspektionen und Unterstützung der internen Audits und Behördeninspektionen * Ideengenerierung zur kontinuierlichen Verbesserung, Verschlankung unserer Prozesse und derer Umsetzung Must Haves: * Abgeschlossenes Hochschulstudium in einem naturwissenschaftlichen Feld (z.B. Biologie, Chemie, Pharmazie) oder im Bereich des Ingenieurwesens (z.B. Biotechnologie, Verfahrenstechnik, Pharmatechnik) * Min. 3 Jahre Berufserfahrung in der Qualitätssicherung in einem GMP regulierten Unternehmen, bevorzugt in der pharmazeutischen Industrie * Routine in der Quality-Rolle bei der Bearbeitung von Abweichungen, Technischen Changes, Batch record review und CAPAs * Sehr gute Deutsch- und Englischkenntnisse in Wort und Schrift und ein versierter Umgang mit IT Office Applikationen sowie in der Pharmaindustrie gängigen IT Systemen (z.B. TrackWise, Documentum) * Starker Teamplayer mit sehr guten Kommunikationsfähigkeiten Nice to haves: * Erfahrung in einer biotechnologischen Produktion ist ein grosses Plus Reference No.: 923337SGR Rolle: Quality Assurance Manager Industry: Pharma Location: Basel Workload: 100% Start: 01.05.2024 Duration: 12 Deadline: 04.04.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns: ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen keine zusätzlichen Gebühren.
28/03/2024
Project-based
Quality Assurance Manager (m/w/d) - GMP/Qualitätssicherung/Studium/Englisch/TrackWise Projekt : Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Basel suchen wir einen Quality Assurance Manager (m/w/d) Hintergrund : Basel Drug Subtance gliedert sich in vier Value Streams gemäss der vier Produktionstechnolgien am Standort: Monoclonal Antibodies (klassische Fermentation in Stahlreaktoren), Single-Use Technology (Fermentation in Einmal-Behältern), Antibody Drug Conjugates und Small Molecules. Als Quality Assurance Manager bei Basel Drug Substance trägt man zu einer adäquaten Quality Oversight über die vier Value Streams bei. Die Person ist verantwortlich für die Einhaltung und ständige Verbesserung des Qualitätssystems unter Berücksichtigung der aktuellen gesetzlichen und Roche-internen Anforderungen. Man unterstützt oder übernimmt Aufgaben und Projekte in einem der drei Quality Operations Chapter (MAB, SUT, ADC&SM). Als Quality Assurance Manager arbeitet man sich in neue Themenbereiche ein, erweitert ihr Netzwerk und trägt durch ihre wechselnden Einsatzgebiete zur Harmonisierung und Optimierung unserer Prozesse bei. Der oder die perfekte Kandidat:in hat ein abgeschlossenes Studium im naturwissenschaftlichen oder technischen Bereich und bringt bereits Berufserfahrung in der Qualitätssicherung in einem GMP regulierten Unternehmen mit. Die Person verfügt zudem über Erfahrung im pharmazeutischen Umfeld. Aufgaben : * Man wird in einem der drei Quality Chapter eingesetzt und eignet sich das dort erforderliche Wissen an * Ansprechpartner der Produktionsbetriebe in allen Qualitätsbelangen * Sicherstellung von Quality Oversight und GMP-Compliance bei allen betreuten Produktionen und Projekten und Überwachung der Einhaltung der internen Vorgabedokumente * Überprüfung, Beurteilung und Genehmigung der Herstelldokumentation (Batch Record Review) auf Papier und innerhalb des elektronischen Manufacturing Execution Systems (MES) * Freigabe der hergestellten Wirkstoffe * Initiierung, Bearbeitung, Beurteilung und Genehmigung der Abweichungen (Deviations), Korrektur-und Präventionsmassnahmen (CAPAs) und technische Änderungsanträge (Changes) * Erstellung, Prüfung und Genehmigung GMP-Dokumente * Durchführung der Qualitätsbegehungen und Selbstinspektionen und Unterstützung der internen Audits und Behördeninspektionen * Ideengenerierung zur kontinuierlichen Verbesserung, Verschlankung unserer Prozesse und derer Umsetzung Must Haves: * Abgeschlossenes Hochschulstudium in einem naturwissenschaftlichen Feld (z.B. Biologie, Chemie, Pharmazie) oder im Bereich des Ingenieurwesens (z.B. Biotechnologie, Verfahrenstechnik, Pharmatechnik) * Min. 3 Jahre Berufserfahrung in der Qualitätssicherung in einem GMP regulierten Unternehmen, bevorzugt in der pharmazeutischen Industrie * Routine in der Quality-Rolle bei der Bearbeitung von Abweichungen, Technischen Changes, Batch record review und CAPAs * Sehr gute Deutsch- und Englischkenntnisse in Wort und Schrift und ein versierter Umgang mit IT Office Applikationen sowie in der Pharmaindustrie gängigen IT Systemen (z.B. TrackWise, Documentum) * Starker Teamplayer mit sehr guten Kommunikationsfähigkeiten Nice to haves: * Erfahrung in einer biotechnologischen Produktion ist ein grosses Plus Reference No.: 923337SGR Rolle: Quality Assurance Manager Industry: Pharma Location: Basel Workload: 100% Start: 01.05.2024 Duration: 12 Deadline: 04.04.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns: ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen keine zusätzlichen Gebühren.
Position: Piping Material Engineer Location: Leatherhead Offices - Hybrid (3 days onsite) Duration: 6-month contract We are looking for an enthusiastic Piping Materials Engineer to join a reputable organisation based in Leatherhead. Job Responsibilities: Develop deliverables including Piping Material Classes, Technical Specifications and Requisitions. Create/amend technical specifications for new equipment scope, utilising expert inputs where applicable. Interface with other engineering disciplines as well as supporting disciplines. Work individually or as part of a team in the home office and abroad. Communicate effectively with other engineering disciplines. Adhere to the organisations WAY engineering standards and procedures as well as provide input to their development and enhancement. Perform surveillance and approval of contractor deliverables and design activities. Lead contract technical and project meetings Resolution activities for multi-disciplinary technical issues and queries Skills required: Knowledge of applicable industry standards (ASME B31.3, API, BS EN etc). Working knowledge of PED 2014/68/EU Technical knowledge of different Valves and Special Piping Items. Package Responsible Engineer with experience working with valves. Strong technical understanding of valves and project execution methodologies Experience on large EPC projects. Keen to knowledge share with Engineers located in Leatherhead and in other offices. Mechanical Engineering Degree (BEng) or Material Engineering Degree (BEng) If you are a Piping Materials Engineer seeking a new opportunity, please apply now. Reference: 72482
28/03/2024
Project-based
Position: Piping Material Engineer Location: Leatherhead Offices - Hybrid (3 days onsite) Duration: 6-month contract We are looking for an enthusiastic Piping Materials Engineer to join a reputable organisation based in Leatherhead. Job Responsibilities: Develop deliverables including Piping Material Classes, Technical Specifications and Requisitions. Create/amend technical specifications for new equipment scope, utilising expert inputs where applicable. Interface with other engineering disciplines as well as supporting disciplines. Work individually or as part of a team in the home office and abroad. Communicate effectively with other engineering disciplines. Adhere to the organisations WAY engineering standards and procedures as well as provide input to their development and enhancement. Perform surveillance and approval of contractor deliverables and design activities. Lead contract technical and project meetings Resolution activities for multi-disciplinary technical issues and queries Skills required: Knowledge of applicable industry standards (ASME B31.3, API, BS EN etc). Working knowledge of PED 2014/68/EU Technical knowledge of different Valves and Special Piping Items. Package Responsible Engineer with experience working with valves. Strong technical understanding of valves and project execution methodologies Experience on large EPC projects. Keen to knowledge share with Engineers located in Leatherhead and in other offices. Mechanical Engineering Degree (BEng) or Material Engineering Degree (BEng) If you are a Piping Materials Engineer seeking a new opportunity, please apply now. Reference: 72482
Job Title - Mechanical Design Engineer Job Location - Bristol (Hybrid Working Model) Employment Type - Contract position (Outside IR35) Job Description I am currently representing a fantastic company who work with some of the biggest Aerospace manufacturers in the world. They are currently seeking a highly motivated and experienced Mechanical Design Engineer to join their team on a contract basis. The candidate must have previous experience within the Aerospace sector and ideally have worked on Aircraft structures. The ideal candidate would have worked with Composite Design, however this experience is not essential if you'd like to apply for this position. Key Responsibilities for the Mechanical Design Engineer: Collaborate with cross-functional teams to conceptualize and design aircraft structures, ensuring compliance with industry standards and client specifications. Create detailed 3D models, assemblies, and engineering drawings using Catia or 3DExperience. Conduct structural analyses and simulations to validate designs and identify potential improvements. Work closely with manufacturing teams to provide support during the fabrication and assembly processes. Requirements for the Mechanical Design Engineer: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. Proven experience in aerospace mechanical design, with a focus on aircraft structures. Proficient in CAD software, particularly Catia or 3DExperience. Strong understanding of aerospace materials, manufacturing processes, and industry standards. Desirable Master's degree in Mechanical Engineering, Aerospace Engineering, or a related field. Experience with other relevant software tools used in the aerospace industry. Familiarity with regulatory requirements and certifications for aerospace structures. T200, Design Approval or Design Authorisation highly desirable Get in touch now if you'd like to apply for this exciting opportunity, please follow the appropriate links or contact Talib Jetha directly
28/03/2024
Project-based
Job Title - Mechanical Design Engineer Job Location - Bristol (Hybrid Working Model) Employment Type - Contract position (Outside IR35) Job Description I am currently representing a fantastic company who work with some of the biggest Aerospace manufacturers in the world. They are currently seeking a highly motivated and experienced Mechanical Design Engineer to join their team on a contract basis. The candidate must have previous experience within the Aerospace sector and ideally have worked on Aircraft structures. The ideal candidate would have worked with Composite Design, however this experience is not essential if you'd like to apply for this position. Key Responsibilities for the Mechanical Design Engineer: Collaborate with cross-functional teams to conceptualize and design aircraft structures, ensuring compliance with industry standards and client specifications. Create detailed 3D models, assemblies, and engineering drawings using Catia or 3DExperience. Conduct structural analyses and simulations to validate designs and identify potential improvements. Work closely with manufacturing teams to provide support during the fabrication and assembly processes. Requirements for the Mechanical Design Engineer: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. Proven experience in aerospace mechanical design, with a focus on aircraft structures. Proficient in CAD software, particularly Catia or 3DExperience. Strong understanding of aerospace materials, manufacturing processes, and industry standards. Desirable Master's degree in Mechanical Engineering, Aerospace Engineering, or a related field. Experience with other relevant software tools used in the aerospace industry. Familiarity with regulatory requirements and certifications for aerospace structures. T200, Design Approval or Design Authorisation highly desirable Get in touch now if you'd like to apply for this exciting opportunity, please follow the appropriate links or contact Talib Jetha directly
We are Global IT Recruitment specialist that provides support to the clients across UK, Europe and Australia. We have an excellent job opportunity for you. Job Title: Site Contract & Commercial Officer Duration: 6 months Location: Bridgwater, Somerset Job Description: The Site Contract & Commercial Officer will take responsibility for commercial discussions regarding site activities with the customer, in close coordination with Paris C&C team. Responsible for contractual activities linked to site matters, among other coordinating Early Warnings and General communications, in close coordination with Paris C&C team. Facilitating daily interfaces between client on site and Framatome Project Team. Main Responsibilities Commercial topics Coordinate with client to clarify Variation Requests (VAR) and Variation Proposals (VP) Ensure communication with client (respectively Framatome) When required, setup dedicated data room Prepare and attend the Change & Opportunity Meetings Coordinate the Early Warnings management Set-up and attend the Risk Reduction Meetings (RRM), and draft the related Minutes of Meeting Follow-up the overall progress (from Early Warning's creation to closing, including actions resulting from Risks Mitigation Meetings) Liaise with client to progress and clarify actions expected by client, and communicate to Framatome Respectively, liaise with Framatome to progress and clarify actions expected by Framatome, and communicate to client Prepare and lead the weekly meetings within Framatome Prepare and lead the weekly meetings between client and Framatome Prepare the monthly monitoring and related analyses General Communications (GCs) issued by client Where relevant, draft answers for Framatome Pilots' validation Attend the weekly progress meetings with client Support the Contract Team based in La Défense Manage any specific work delegated by the Framatome Contract Team in La Défense client Expedite, coordinate or lead actions raised in the monthly CCM Coordinate transverse topics Ensure a smooth and effective communication between the respective CCM Teams (client and Framatome) Collect any request from client related to Contract/Commercial, clarifies them where required and systematically transmits the requests to the corresponding Framatome Manager in France or in UK Define with point(s) of contract in France or in UK the way and the timeframe to respond to client: preparation of the answer, internal validation before sending to client, presentation to client, additional clarifications (in any) Collect any request from Framatome related to Contract/Commercial, clarifies them where required, transmits and explains the requests to the appropriate client members Key Skills and experiences: Extensive experience in a similar role, ideally in Large Projects Ideally worked on client more than 5 years experience in a similar role Excellent communication skills Results orientation, reliable, analytical capabilities, sense of synthesis Customer orientation English level: High-Elementary (Bright Test reference) at minimum Computer literate: standard Microsoft package Qualifications Bachelors degree is mandatory, Masters degree is desirable Legal or Business School Degree Background: Nuclear, Construction, Engineering, Large projects
27/03/2024
Project-based
We are Global IT Recruitment specialist that provides support to the clients across UK, Europe and Australia. We have an excellent job opportunity for you. Job Title: Site Contract & Commercial Officer Duration: 6 months Location: Bridgwater, Somerset Job Description: The Site Contract & Commercial Officer will take responsibility for commercial discussions regarding site activities with the customer, in close coordination with Paris C&C team. Responsible for contractual activities linked to site matters, among other coordinating Early Warnings and General communications, in close coordination with Paris C&C team. Facilitating daily interfaces between client on site and Framatome Project Team. Main Responsibilities Commercial topics Coordinate with client to clarify Variation Requests (VAR) and Variation Proposals (VP) Ensure communication with client (respectively Framatome) When required, setup dedicated data room Prepare and attend the Change & Opportunity Meetings Coordinate the Early Warnings management Set-up and attend the Risk Reduction Meetings (RRM), and draft the related Minutes of Meeting Follow-up the overall progress (from Early Warning's creation to closing, including actions resulting from Risks Mitigation Meetings) Liaise with client to progress and clarify actions expected by client, and communicate to Framatome Respectively, liaise with Framatome to progress and clarify actions expected by Framatome, and communicate to client Prepare and lead the weekly meetings within Framatome Prepare and lead the weekly meetings between client and Framatome Prepare the monthly monitoring and related analyses General Communications (GCs) issued by client Where relevant, draft answers for Framatome Pilots' validation Attend the weekly progress meetings with client Support the Contract Team based in La Défense Manage any specific work delegated by the Framatome Contract Team in La Défense client Expedite, coordinate or lead actions raised in the monthly CCM Coordinate transverse topics Ensure a smooth and effective communication between the respective CCM Teams (client and Framatome) Collect any request from client related to Contract/Commercial, clarifies them where required and systematically transmits the requests to the corresponding Framatome Manager in France or in UK Define with point(s) of contract in France or in UK the way and the timeframe to respond to client: preparation of the answer, internal validation before sending to client, presentation to client, additional clarifications (in any) Collect any request from Framatome related to Contract/Commercial, clarifies them where required, transmits and explains the requests to the appropriate client members Key Skills and experiences: Extensive experience in a similar role, ideally in Large Projects Ideally worked on client more than 5 years experience in a similar role Excellent communication skills Results orientation, reliable, analytical capabilities, sense of synthesis Customer orientation English level: High-Elementary (Bright Test reference) at minimum Computer literate: standard Microsoft package Qualifications Bachelors degree is mandatory, Masters degree is desirable Legal or Business School Degree Background: Nuclear, Construction, Engineering, Large projects
Job Title: Junior Surveillance Mechanical Engineer Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset Job Description: As a mechanical surveillance engineer, you will join EIRA team in charge of the surveillance of the manufacturing and installation of nuclear equipment for worldwide power plants. It is a rewarding experience that starts with comprehensive training and tutoring, with the objective of good respect of the contractual technical requirements, the manufacturing and installation follow-up of equipment's with the highest quality and safety level. The surveillance engineer is a key player during the installation phases as an in-the-field representative. The surveillance engineer works closely with the other departments (quality, installation, project, engineering, procurement, expediting, cost) to ensure the conformity of the manufacturing or installation activities and of equipment's on factories or construction site. EIRA team also gives the opportunity to develop technical skills on a wider range of equipment's, such as pressure vessel, steam generators, pumps, valves, instrumentation, and offers worldwide opportunity of experience. is looking for a Mechanical Engineer for the surveillance of the primary loop installation activities for the Hinkley Point EPR construction site. Main Responsibilities: Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning Ensure the surveillance plan is respected Review the Follow up Documents and End of Installation reports Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures) Organize your own schedules of surveillance activities with the surveillance leader Contribute to open points treatments and closure Participate to progress meetings with installation, projects, suppliers or customers Key Skills and experiences: Min 1 year experience with technical degree qualification Manufacturing processes knowledge (welding, foundry, forge ) Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge Quality fundamentals knowledge Ability to read and understand the technical engineering documents of scheme Fluent English (spoken and written) Organisation Capability to defend and explain own observations Being critical and analytical minded to be able to identify deviations and to contribute to their resolution Autonomy to manage the surveillance on-site schedule or business trip Team working Qualifications Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. Knowledge in welding or non destructive testing - desirable. Additional information Training: several months training periods on various localisation in France and Europe. Some out of hours working will be required
27/03/2024
Project-based
Job Title: Junior Surveillance Mechanical Engineer Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset Job Description: As a mechanical surveillance engineer, you will join EIRA team in charge of the surveillance of the manufacturing and installation of nuclear equipment for worldwide power plants. It is a rewarding experience that starts with comprehensive training and tutoring, with the objective of good respect of the contractual technical requirements, the manufacturing and installation follow-up of equipment's with the highest quality and safety level. The surveillance engineer is a key player during the installation phases as an in-the-field representative. The surveillance engineer works closely with the other departments (quality, installation, project, engineering, procurement, expediting, cost) to ensure the conformity of the manufacturing or installation activities and of equipment's on factories or construction site. EIRA team also gives the opportunity to develop technical skills on a wider range of equipment's, such as pressure vessel, steam generators, pumps, valves, instrumentation, and offers worldwide opportunity of experience. is looking for a Mechanical Engineer for the surveillance of the primary loop installation activities for the Hinkley Point EPR construction site. Main Responsibilities: Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning Ensure the surveillance plan is respected Review the Follow up Documents and End of Installation reports Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures) Organize your own schedules of surveillance activities with the surveillance leader Contribute to open points treatments and closure Participate to progress meetings with installation, projects, suppliers or customers Key Skills and experiences: Min 1 year experience with technical degree qualification Manufacturing processes knowledge (welding, foundry, forge ) Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge Quality fundamentals knowledge Ability to read and understand the technical engineering documents of scheme Fluent English (spoken and written) Organisation Capability to defend and explain own observations Being critical and analytical minded to be able to identify deviations and to contribute to their resolution Autonomy to manage the surveillance on-site schedule or business trip Team working Qualifications Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. Knowledge in welding or non destructive testing - desirable. Additional information Training: several months training periods on various localisation in France and Europe. Some out of hours working will be required
We are looking for a Senior Senior Document Controller/Handover Coordinator to work within the defence sector. Location: Hybrid working- Aldermaston or Burghfield About the role : You will be responsible for managing, organising and controlling the handover activities on behalf of the Project Manager to progress successful Handover and delivery of a single project or multiple individual work packages. Essential Skills: The ideal candidates will hold active DV clearance and have a proven Handover Coordination background, with the following skills/experience: Experience in project coordination within a defence environment. Knowledge of construction/commissioning. Experience working in a site office on facilities/infrastructure projects (hospitals, airports, rail etc). Experience of documentation control. Knowledge of Health and Safety records.
27/03/2024
Project-based
We are looking for a Senior Senior Document Controller/Handover Coordinator to work within the defence sector. Location: Hybrid working- Aldermaston or Burghfield About the role : You will be responsible for managing, organising and controlling the handover activities on behalf of the Project Manager to progress successful Handover and delivery of a single project or multiple individual work packages. Essential Skills: The ideal candidates will hold active DV clearance and have a proven Handover Coordination background, with the following skills/experience: Experience in project coordination within a defence environment. Knowledge of construction/commissioning. Experience working in a site office on facilities/infrastructure projects (hospitals, airports, rail etc). Experience of documentation control. Knowledge of Health and Safety records.
Job Title: Opex Improvement Officer Clearance required: BPSS (Eligible) Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset/possibility to work 1 day a week from home Job Description: Main Responsibilities: You will contribute to the improvement of all the OPEX Quality activities on site for the project with respect to the Management System in force Lead the continuous improvement process and help in the proper application of OPEX tools (visual management including 5S approach, field routines, deployment of work standards, A3 or 8D problem solving methods, suggestion system, etc.) Contribute to the definition of the objectives of the site's annual performance plan (simplification of processes, process expertise, etc.) and supervise their implementation Lead, energize, facilitate the conduct of continuous improvement projects and ensure progress reporting Disseminate and ensure the use of the Framatome group's standard formats Ensure the follow-up of the site's masterplan (prioritized action plan) Provide expertise and training to managers in the areas of problem solving Provide support to all employees in the use of Excellence, human reliability or project management tools. Key Skills and experiences: You have an engineer degree with ideally a first experience in the field of quality and engineering. You have operational experience in an industrial environment on a production site of at least 5 years (Production, Maintenance, Methods, etc.) You have knowledge and experience in Lean You have knowledge of project management You are field-oriented and results-oriented You demonstrate an ability to convince, unite and lead change Background: Nuclear, Off-shore, Aerospace, Nuclear manufacturing Additional information No job travel, on site Full Time
27/03/2024
Project-based
Job Title: Opex Improvement Officer Clearance required: BPSS (Eligible) Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset/possibility to work 1 day a week from home Job Description: Main Responsibilities: You will contribute to the improvement of all the OPEX Quality activities on site for the project with respect to the Management System in force Lead the continuous improvement process and help in the proper application of OPEX tools (visual management including 5S approach, field routines, deployment of work standards, A3 or 8D problem solving methods, suggestion system, etc.) Contribute to the definition of the objectives of the site's annual performance plan (simplification of processes, process expertise, etc.) and supervise their implementation Lead, energize, facilitate the conduct of continuous improvement projects and ensure progress reporting Disseminate and ensure the use of the Framatome group's standard formats Ensure the follow-up of the site's masterplan (prioritized action plan) Provide expertise and training to managers in the areas of problem solving Provide support to all employees in the use of Excellence, human reliability or project management tools. Key Skills and experiences: You have an engineer degree with ideally a first experience in the field of quality and engineering. You have operational experience in an industrial environment on a production site of at least 5 years (Production, Maintenance, Methods, etc.) You have knowledge and experience in Lean You have knowledge of project management You are field-oriented and results-oriented You demonstrate an ability to convince, unite and lead change Background: Nuclear, Off-shore, Aerospace, Nuclear manufacturing Additional information No job travel, on site Full Time
EMC Engineer required for a long term contract assignment based in Bristol with some hybrid working. Responsibilities: EMC engineers are responsible for managing assigned milestone deliverables associated with EMC Engineering activities and act as focal point and specialist for EMC requirements for the project teams. The role involves writing Environmental Requirement Specifications (ERS's) and subsequent documentation including EMC Control Plans, Proving Plans, Proving Requirements and Proving Instructions in support of product development and qualification. Our EMC engineers oversee EMC qualification testing to ensure evidence will be suitable for our customers, working across functional and international boundaries to resolve sophisticated technical problems using analytical tools. Skillset/experience required: Essential * Higher education or significant experience within subject fields: Electronics, Electrical, Physics, EMC or similar. * Good Understanding of EMC and design principles. * Excellent communication skills at all levels, both verbally and in writing. * Ability to work to defined deadlines and within budget limits. * Excellent Analytical and Problem Solving skills. * Professional manner and adaptability when the companies needs are evolving. * Capable of working autonomously to meet the delivery needs of the company Desirable * Knowledge in the application of a military EMC standard to system, sub-system or equipment level is desirable (eg Defence Standard 59-, AECTP500, Mil-Std-461, RTCA DO160/EUROCAE ED-14). * Engineer's with previous experience in delivering support around the subject of electromagnetic compatibility. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
27/03/2024
Project-based
EMC Engineer required for a long term contract assignment based in Bristol with some hybrid working. Responsibilities: EMC engineers are responsible for managing assigned milestone deliverables associated with EMC Engineering activities and act as focal point and specialist for EMC requirements for the project teams. The role involves writing Environmental Requirement Specifications (ERS's) and subsequent documentation including EMC Control Plans, Proving Plans, Proving Requirements and Proving Instructions in support of product development and qualification. Our EMC engineers oversee EMC qualification testing to ensure evidence will be suitable for our customers, working across functional and international boundaries to resolve sophisticated technical problems using analytical tools. Skillset/experience required: Essential * Higher education or significant experience within subject fields: Electronics, Electrical, Physics, EMC or similar. * Good Understanding of EMC and design principles. * Excellent communication skills at all levels, both verbally and in writing. * Ability to work to defined deadlines and within budget limits. * Excellent Analytical and Problem Solving skills. * Professional manner and adaptability when the companies needs are evolving. * Capable of working autonomously to meet the delivery needs of the company Desirable * Knowledge in the application of a military EMC standard to system, sub-system or equipment level is desirable (eg Defence Standard 59-, AECTP500, Mil-Std-461, RTCA DO160/EUROCAE ED-14). * Engineer's with previous experience in delivering support around the subject of electromagnetic compatibility. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
SENIOR Mechanical Engineer Up to £50 per hour REMOTE - Bristol A leading global enterprise specializes in delivering critical support services across various industries is looking for a Senior Mechanical Engineer . Renowned for its commitment to excellence, this company consistently delivers value to clients in defence, nuclear, marine etc. Creating comprehensive written and visual guides for system operators and maintainers on maintenance and replacement procedures, including the production of accompanying exploded diagrams. Additionally, reviewing and overseeing the work of fellow team members to ensure accuracy and quality. Skills Required : Checking for most mechanical engineering deliverables 3D CAD and technical drawings. Proficient with use of TeamCenter and NX. Experience of reading and interpreting hydraulic/pneumatic schematics. The company is driven by heritage and a forward-looking vision, this influential entity excels in diverse sectors, setting global benchmarks in engineering and support services. If you are committed to excellence and want to impact resonates across critical domains, then this role is for you. *P. S: Company cannot provide visa sponsorship, so only candidates residing in UK and with the existing right to work will be considered for the role.
27/03/2024
Project-based
SENIOR Mechanical Engineer Up to £50 per hour REMOTE - Bristol A leading global enterprise specializes in delivering critical support services across various industries is looking for a Senior Mechanical Engineer . Renowned for its commitment to excellence, this company consistently delivers value to clients in defence, nuclear, marine etc. Creating comprehensive written and visual guides for system operators and maintainers on maintenance and replacement procedures, including the production of accompanying exploded diagrams. Additionally, reviewing and overseeing the work of fellow team members to ensure accuracy and quality. Skills Required : Checking for most mechanical engineering deliverables 3D CAD and technical drawings. Proficient with use of TeamCenter and NX. Experience of reading and interpreting hydraulic/pneumatic schematics. The company is driven by heritage and a forward-looking vision, this influential entity excels in diverse sectors, setting global benchmarks in engineering and support services. If you are committed to excellence and want to impact resonates across critical domains, then this role is for you. *P. S: Company cannot provide visa sponsorship, so only candidates residing in UK and with the existing right to work will be considered for the role.