Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
18/04/2024
Full time
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
18/04/2024
Full time
Senior Hardware Design Engineer - Exciting Opportunity with Leading Tech Company Lynx is working with a renowned tech company to recruit a Senior Hardware Design Engineer. In this role you'll play a pivotal role in new product introduction as well as sustaining engineering for ground-breaking products. This is a hybrid role and also offers a bonus of 3-6%. Key Responsibilities: Design electronic circuits, subsystems, and systems covering analog, digital, and RF Schematic capture, layout, and library management Evaluate new systems and technologies for feasibility and product design Technical support for production, manufacturing, and troubleshooting Design verification, testing, and documentation Requirements: 4+ years of relevant hardware design experience Strong expertise in digital circuit design (microprocessors, FPGAs, high-speed peripherals) Solid skills in analog circuit design (power supplies, etc.) Familiarity with PCB layout, EMC/CE marking, and design for IPC Hands-on experience in PCB testing Desired: Proficiency with industry-standard design tools - Altium preferred Understanding of military/airborne design standards (MIL-STD, DO-160, etc.) Practical testing skills with scopes, analysers, JTAG boundary scan, etc. Hit apply to find out more information.
Junior Design Engineer Location, West Sussex Salary, £25,000 to £32,000 + Benefits I am looking to speak with upcoming Design Engineers either straight out of university or with 12 months or more experience behind them to work for a global Powerhouse. Our client designs and manufactures both off the shelf and bespoke products, to customers worldwide. In this role you will truly get to see everything from start to finish, getting hands on with your projects and working with world class engineering professionals. What is important to the employer? Degree Educated (within Engineering, 2:1 or 1st Class) Experience of CAD systems such as Solidworks and Inventor Able to demonstrate good communication skills through project work Someone who has a passion for Engineering and genuine desire to work within it Now, what is in it for you? An opportunity to learn and develop Working in an established team with opportunity to progress Extensive Training is provided You get to work with a range of customers A real chance to challenge your engineering mind For more information, please apply with an updated copy of your CV or call.
18/04/2024
Full time
Junior Design Engineer Location, West Sussex Salary, £25,000 to £32,000 + Benefits I am looking to speak with upcoming Design Engineers either straight out of university or with 12 months or more experience behind them to work for a global Powerhouse. Our client designs and manufactures both off the shelf and bespoke products, to customers worldwide. In this role you will truly get to see everything from start to finish, getting hands on with your projects and working with world class engineering professionals. What is important to the employer? Degree Educated (within Engineering, 2:1 or 1st Class) Experience of CAD systems such as Solidworks and Inventor Able to demonstrate good communication skills through project work Someone who has a passion for Engineering and genuine desire to work within it Now, what is in it for you? An opportunity to learn and develop Working in an established team with opportunity to progress Extensive Training is provided You get to work with a range of customers A real chance to challenge your engineering mind For more information, please apply with an updated copy of your CV or call.
If you've been looking for a company allowing you to work remotely, this is it. We are looking to hire a Regulatory Specialist permanently for a Medical Device manufacturer taking full ownership for their biocide product range. Here's a sneak peek into what your role will entail: - Technical documentation: You will be responsible for maintaining and updating technical documentation, ensuring compliance with regulations such as MDD to MDR (Medical Device Regulation). - Safety Data Sheets (SDS): As our client currently outsources this task, we are looking for someone who can review and check SDS, ensuring they meet the required standards before sending them to an external company for final approval. - Biocide Subject Matter Expertise: Our client has upcoming projects that require a regulatory specialist with expertise in biocides. You will be leading these projects and providing valuable insights and guidance. - Collaboration: You will be working closely with multiple departments, so effective communication and collaboration skills are crucial. You should be confident in liaising with various stakeholders and holding your own when it comes to advocating for biocide compliance. If you are passionate about regulatory compliance and have a keen eye for detail, this role could be the perfect fit for you. To apply, please submit your CV, highlighting your experience in managing regulatory compliance, authoring technical files, and your achievements in the field.
18/04/2024
Full time
If you've been looking for a company allowing you to work remotely, this is it. We are looking to hire a Regulatory Specialist permanently for a Medical Device manufacturer taking full ownership for their biocide product range. Here's a sneak peek into what your role will entail: - Technical documentation: You will be responsible for maintaining and updating technical documentation, ensuring compliance with regulations such as MDD to MDR (Medical Device Regulation). - Safety Data Sheets (SDS): As our client currently outsources this task, we are looking for someone who can review and check SDS, ensuring they meet the required standards before sending them to an external company for final approval. - Biocide Subject Matter Expertise: Our client has upcoming projects that require a regulatory specialist with expertise in biocides. You will be leading these projects and providing valuable insights and guidance. - Collaboration: You will be working closely with multiple departments, so effective communication and collaboration skills are crucial. You should be confident in liaising with various stakeholders and holding your own when it comes to advocating for biocide compliance. If you are passionate about regulatory compliance and have a keen eye for detail, this role could be the perfect fit for you. To apply, please submit your CV, highlighting your experience in managing regulatory compliance, authoring technical files, and your achievements in the field.
Tiro Partners are looking for a an Electrical Controls Engineer to join an engineering consultancy on a permanent basis. This role is paying circa £50,000. The role requires on site work in Derby. Job requirements: Experienced in Electrical Design (EPLAN/SolidWorks Preferred) Machine Safety, Instrumentation and Control PLC Programming or LabVIEW DSEAR Regulations Highly Beneficial For more information please apply with an updated copy of your CV or call.
18/04/2024
Full time
Tiro Partners are looking for a an Electrical Controls Engineer to join an engineering consultancy on a permanent basis. This role is paying circa £50,000. The role requires on site work in Derby. Job requirements: Experienced in Electrical Design (EPLAN/SolidWorks Preferred) Machine Safety, Instrumentation and Control PLC Programming or LabVIEW DSEAR Regulations Highly Beneficial For more information please apply with an updated copy of your CV or call.
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
18/04/2024
Project-based
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
Job Title: B1/B2 Licensed Aircraft Engineer Location: Line Stations across the UK Permanent/contract positions Our client has multiple openings for experienced B1 and B1/B2 licensed aircraft engineers to support line maintenance activities at stations across the UK. Responsibilities Perform line maintenance inspections and troubleshooting on various narrow body aircraft types such as B737NG and advantageous if experienced on B757/B767 Rectify aircraft defects and faults to return aircraft back to service Conduct maintenance tasks according to approved data and regulatory standards Accurately document all work carried out in aircraft logs and records Liaise with pilots, engineers and planners to coordinate maintenance schedules Requirements Hold a valid B1 or B1/B2 Aircraft Engineer's License issued by EASA/CAA Have B737NG type training and certification Previous line maintenance experience is essential Demonstrate 6 months system/component recency in the last 2 years Have current EWIS, Human Factors, Fuel Tank Safety and SMS qualifications Eligibility to work in the UK with appropriate visa status What We Offer Competitive salary and benefit packages Ongoing learning/development opportunities Shared van accommodation available The chance to work with a fantastic team of engineers across the UK So if you are an experienced and knowledgeable B1 or B1/B2 licensed engineer looking for an exciting line maintenance engineering role until October 2024, apply today! We have positions available across multiple UK line stations.
18/04/2024
Full time
Job Title: B1/B2 Licensed Aircraft Engineer Location: Line Stations across the UK Permanent/contract positions Our client has multiple openings for experienced B1 and B1/B2 licensed aircraft engineers to support line maintenance activities at stations across the UK. Responsibilities Perform line maintenance inspections and troubleshooting on various narrow body aircraft types such as B737NG and advantageous if experienced on B757/B767 Rectify aircraft defects and faults to return aircraft back to service Conduct maintenance tasks according to approved data and regulatory standards Accurately document all work carried out in aircraft logs and records Liaise with pilots, engineers and planners to coordinate maintenance schedules Requirements Hold a valid B1 or B1/B2 Aircraft Engineer's License issued by EASA/CAA Have B737NG type training and certification Previous line maintenance experience is essential Demonstrate 6 months system/component recency in the last 2 years Have current EWIS, Human Factors, Fuel Tank Safety and SMS qualifications Eligibility to work in the UK with appropriate visa status What We Offer Competitive salary and benefit packages Ongoing learning/development opportunities Shared van accommodation available The chance to work with a fantastic team of engineers across the UK So if you are an experienced and knowledgeable B1 or B1/B2 licensed engineer looking for an exciting line maintenance engineering role until October 2024, apply today! We have positions available across multiple UK line stations.
Job Title: B1/B2 Licensed Aircraft Engineer Location: Line Stations across the UK Permanent/contract positions Our client has multiple openings for experienced B1 and B1/B2 licensed aircraft engineers to support line maintenance activities at stations across the UK. Responsibilities Perform line maintenance inspections and troubleshooting on various narrow body aircraft types such as B737NG and advantageous if experienced on B757/B767 Rectify aircraft defects and faults to return aircraft back to service Conduct maintenance tasks according to approved data and regulatory standards Accurately document all work carried out in aircraft logs and records Liaise with pilots, engineers and planners to coordinate maintenance schedules Requirements Hold a valid B1 or B1/B2 Aircraft Engineer's License issued by EASA/CAA Have B737NG type training and certification Previous line maintenance experience is essential Demonstrate 6 months system/component recency in the last 2 years Have current EWIS, Human Factors, Fuel Tank Safety and SMS qualifications Eligibility to work in the UK with appropriate visa status What We Offer Competitive salary and benefit packages Ongoing learning/development opportunities Shared van accommodation available The chance to work with a fantastic team of engineers across the UK So if you are an experienced and knowledgeable B1 or B1/B2 licensed engineer looking for an exciting line maintenance engineering role until October 2024, apply today! We have positions available across multiple UK line stations.
18/04/2024
Job Title: B1/B2 Licensed Aircraft Engineer Location: Line Stations across the UK Permanent/contract positions Our client has multiple openings for experienced B1 and B1/B2 licensed aircraft engineers to support line maintenance activities at stations across the UK. Responsibilities Perform line maintenance inspections and troubleshooting on various narrow body aircraft types such as B737NG and advantageous if experienced on B757/B767 Rectify aircraft defects and faults to return aircraft back to service Conduct maintenance tasks according to approved data and regulatory standards Accurately document all work carried out in aircraft logs and records Liaise with pilots, engineers and planners to coordinate maintenance schedules Requirements Hold a valid B1 or B1/B2 Aircraft Engineer's License issued by EASA/CAA Have B737NG type training and certification Previous line maintenance experience is essential Demonstrate 6 months system/component recency in the last 2 years Have current EWIS, Human Factors, Fuel Tank Safety and SMS qualifications Eligibility to work in the UK with appropriate visa status What We Offer Competitive salary and benefit packages Ongoing learning/development opportunities Shared van accommodation available The chance to work with a fantastic team of engineers across the UK So if you are an experienced and knowledgeable B1 or B1/B2 licensed engineer looking for an exciting line maintenance engineering role until October 2024, apply today! We have positions available across multiple UK line stations.
Position: B1/2 Licenced Engineer Location: East Midlands Working Hours: 5-5-4 Shift Pattern Competitive Salary + Excellent Benefits! Great Work-Life Balance with a 5-5-4 Shift Pattern! Type Rating Training included for the right individuals! Opportunities for professional development! For more details, read on! Actively seeking talented Licenced Engineers to join our talent Engineering Team on an exciting project based in East Midlands. This opportunity is to support a high-profile customer through a dedicated workforce understanding the need to deliver impeccable service in an active operational environment. To be considered for this position you will hold, a UK CAA Part 66 B1, B2 or B3 Licence with no limitations on airframe or engine that would otherwise restrict the addition of Group 3 type rating for: Vulcanair P68R Victor' Preferred candidates will already hold the Group 3 type rating, however applicants with other similar type ratings will be considered as training and type courses may be provided. Mission system operating and maintenance experience also desirable. The successful candidate will join a long established and respected forward-thinking company that has a proven pedigree in career development within the organisation. As part of this role, you must be prepared to work flexibly as part of a team and as an integral part of the Gama Engineering Group, possessing strong communication, organisation and leadership skills. / About us: A hugely diverse business that offers much more than perhaps its name would suggest. Yes, we fly but we also save lives, provide mission critical intelligence, and build systems that deliver decisive advantage. With operations in the UK, US, Middle East and Hong Kong a career with us can offer travel, personal growth opportunities and the ability for long-term progression in a fast paced and dynamic service industry. / Responsibilities: Responsible for the successful completion of all allocated, planned and ad-hoc maintenance tasks Ensure the completion of scheduled customer order requirements when acting as supervising, certifying or category C engineer for a given input Responsible for the management of and performance/quality of performed works in compliance with applicable company process and procedures Ensure correct compliance with applicable regulatory requirements Maintain the required engineering licence and applicable type rating as required to perform duties and be responsible for ensuring licences and type ratings do not lapse and are kept up to date Accountable for providing professional communication with customers and contacts as required Individual responsibility for booking accurate, and consistent timekeeping in applicable software system / Skills, Qualifications and Experience required: Essential An Unrestricted UK CAA Part 66 Licence Category B1, B2 and/or B3 Previous aircraft base maintenance experience with a wide knowledge and skill range in servicing, inspection repair and modifications Satisfactory recency as required for issue of applicable certifying approval Full UK Driving Licence Advantageous Hold the Group 3 type rating for Vulcanair P68R / In addition to a Competitive Salary, we will offer you: Great work life balance with a 5-5-4 shift pattern Competitive Group Pension Scheme Life Assurance. Income Protection. Travel Insurance. Private Healthcare (after successful passing of probation). Free Car Parking 2 Paid Volunteering Days each calendar year (subject to line manager approval) .(Subject to insurance underwriting) Due to the volume of applications received, only candidates selected for interview will be contacted. If you do not hear from us within 20 working days then your application has been unsuccessful on this occasion.
18/04/2024
Full time
Position: B1/2 Licenced Engineer Location: East Midlands Working Hours: 5-5-4 Shift Pattern Competitive Salary + Excellent Benefits! Great Work-Life Balance with a 5-5-4 Shift Pattern! Type Rating Training included for the right individuals! Opportunities for professional development! For more details, read on! Actively seeking talented Licenced Engineers to join our talent Engineering Team on an exciting project based in East Midlands. This opportunity is to support a high-profile customer through a dedicated workforce understanding the need to deliver impeccable service in an active operational environment. To be considered for this position you will hold, a UK CAA Part 66 B1, B2 or B3 Licence with no limitations on airframe or engine that would otherwise restrict the addition of Group 3 type rating for: Vulcanair P68R Victor' Preferred candidates will already hold the Group 3 type rating, however applicants with other similar type ratings will be considered as training and type courses may be provided. Mission system operating and maintenance experience also desirable. The successful candidate will join a long established and respected forward-thinking company that has a proven pedigree in career development within the organisation. As part of this role, you must be prepared to work flexibly as part of a team and as an integral part of the Gama Engineering Group, possessing strong communication, organisation and leadership skills. / About us: A hugely diverse business that offers much more than perhaps its name would suggest. Yes, we fly but we also save lives, provide mission critical intelligence, and build systems that deliver decisive advantage. With operations in the UK, US, Middle East and Hong Kong a career with us can offer travel, personal growth opportunities and the ability for long-term progression in a fast paced and dynamic service industry. / Responsibilities: Responsible for the successful completion of all allocated, planned and ad-hoc maintenance tasks Ensure the completion of scheduled customer order requirements when acting as supervising, certifying or category C engineer for a given input Responsible for the management of and performance/quality of performed works in compliance with applicable company process and procedures Ensure correct compliance with applicable regulatory requirements Maintain the required engineering licence and applicable type rating as required to perform duties and be responsible for ensuring licences and type ratings do not lapse and are kept up to date Accountable for providing professional communication with customers and contacts as required Individual responsibility for booking accurate, and consistent timekeeping in applicable software system / Skills, Qualifications and Experience required: Essential An Unrestricted UK CAA Part 66 Licence Category B1, B2 and/or B3 Previous aircraft base maintenance experience with a wide knowledge and skill range in servicing, inspection repair and modifications Satisfactory recency as required for issue of applicable certifying approval Full UK Driving Licence Advantageous Hold the Group 3 type rating for Vulcanair P68R / In addition to a Competitive Salary, we will offer you: Great work life balance with a 5-5-4 shift pattern Competitive Group Pension Scheme Life Assurance. Income Protection. Travel Insurance. Private Healthcare (after successful passing of probation). Free Car Parking 2 Paid Volunteering Days each calendar year (subject to line manager approval) .(Subject to insurance underwriting) Due to the volume of applications received, only candidates selected for interview will be contacted. If you do not hear from us within 20 working days then your application has been unsuccessful on this occasion.
Head of Maintenance at Leading Experience Design Company Lynx is seeking an experienced and skilled Head of Maintenance to join our clients' dynamic team in London. As a well-established experience design company with a global presence, they deliver innovative solutions for a diverse range of high-profile clients across various industries. Key Responsibilities: Manage all M&E works from concept and design through to completion Respond to day-to-day maintenance requirements, including repairs and upkeep of premises Carry out regular planned plant and building maintenance checks and services Manage space planning and office moves Control and monitor maintenance-related costs and liaise with relevant suppliers Ensure compliance with current environmental, ESOS, and information security standards Prepare technical risk assessments, method statements, and COSHH assessments Manage fire safety at all UK sites, ensuring fire risk assessments are completed and actioned promptly Respond appropriately to emergencies or urgent issues in line with BCP operations Requirements: Recognised H&S qualification (IOSH/NEBOSH) Strong technical skills and knowledge of relevant technology solutions Proven track record of delivering high-quality technical services to clients Knowledge of BMS systems Working knowledge of relevant regulations, particularly LOLER, PUWER, and COSHH Membership of a professional body (CIBSE, IWFM, CABE) is desirable What's On Offer: Competitive salary up to £60,000 per annum, depending on experience On-site role in iconic London office Opportunities for learning and development that contribute to professional growth Collaborative and creative work environment with a focus on independent creativity 25 days holiday plus your birthday off Flexible/hybrid working policy Attractive benefits package, including private medical insurance, dental insurance, pension scheme, and more If you are a proactive, reliable, and approachable professional with excellent communication skills and a passion for delivering first-class building services, we would love to hear from you. Apply now! Must have indefinite leave to remain in UK.
18/04/2024
Full time
Head of Maintenance at Leading Experience Design Company Lynx is seeking an experienced and skilled Head of Maintenance to join our clients' dynamic team in London. As a well-established experience design company with a global presence, they deliver innovative solutions for a diverse range of high-profile clients across various industries. Key Responsibilities: Manage all M&E works from concept and design through to completion Respond to day-to-day maintenance requirements, including repairs and upkeep of premises Carry out regular planned plant and building maintenance checks and services Manage space planning and office moves Control and monitor maintenance-related costs and liaise with relevant suppliers Ensure compliance with current environmental, ESOS, and information security standards Prepare technical risk assessments, method statements, and COSHH assessments Manage fire safety at all UK sites, ensuring fire risk assessments are completed and actioned promptly Respond appropriately to emergencies or urgent issues in line with BCP operations Requirements: Recognised H&S qualification (IOSH/NEBOSH) Strong technical skills and knowledge of relevant technology solutions Proven track record of delivering high-quality technical services to clients Knowledge of BMS systems Working knowledge of relevant regulations, particularly LOLER, PUWER, and COSHH Membership of a professional body (CIBSE, IWFM, CABE) is desirable What's On Offer: Competitive salary up to £60,000 per annum, depending on experience On-site role in iconic London office Opportunities for learning and development that contribute to professional growth Collaborative and creative work environment with a focus on independent creativity 25 days holiday plus your birthday off Flexible/hybrid working policy Attractive benefits package, including private medical insurance, dental insurance, pension scheme, and more If you are a proactive, reliable, and approachable professional with excellent communication skills and a passion for delivering first-class building services, we would love to hear from you. Apply now! Must have indefinite leave to remain in UK.
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
18/04/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
18/04/2024
Full time
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
18/04/2024
Full time
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
18/04/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
18/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
18/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Head of Laboratory Test Development & Validation (German Speaking). The role is a permanent position based in Bern Canton & comes with good home office allowance. Your Role: Oversee the personnel & technical management of a specialist group of 4 Engineers & 3 Laboratory Technicians. Develop & validate new physical measurement & testing methods. Provide technical support for Design Verification Laboratories. Hold responsibility for the operation & maintenance of a Development Laboratory. Plan, coordinate & execute measurement & testing orders in relation to Product Innovation & Product Development. Place, award & support contracts to external service providers if required. Your Skills: At least 5 years of relevant professional experience including experience within Development Laboratories. Skilled & experienced in Leading teams. Ideally experienced in Design Verification & the Medical Technology sector. Your Profile: Completed relevant Scientific or Technical University Degree. Communicative, strong leadership skills & solution-oriented. Fluent English & good German language skills (to at least B2 Level) are a mandatory requirement.
The Role The position is for enthusiastic and motivated Principal Consultants who will be part of our EIA teams, with specialisms in infrastructure EIA. In particular we are looking for a candidate to help deliver projects in any of the energy, water, highways, rail and coastal sectors to meet our growing and exciting portfolio of project needs. As a collaborative team we also have cross-working opportunities with our EIA property team. Applicants need to be client focused with a positive and proactive attitude, excellent communication skills and happy to work as part of a team. All roles will work closely with our Planning, Social value and social economics teams and a wide range of external partners, to deliver across a range of projects. The successful candidate will be expected to have a thorough knowledge of EIA, including guidelines and the planning process and a proven track record of managing and leading multidisciplinary teams for EIA, on time and on budget. They will also be expected to have excellent project management, report writing and communication and client liaison skills with a keen eye for detail and a positive attitude towards business development. They will be expected to enhance our diverse project portfolio by leading or contribute to bids for projects of all scales, size and sectors. Their role within project delivery may be as project manager, framework manager and/or technical lead. They would also be expected to assist with the training/mentoring of junior members of the team. We offer flexible hybrid working and would consider candidates across our other locations. The Candidate We expect the successful Principal candidates will: * Have 5-8 years of consulting experience. * Have project delivery experience with a strong work ethic, able to be organised, flexible and motivated. * Have demonstratable experience contributing to and managing the delivery of EIA and related projects, primarily in the infrastructure sector (energy, water, rail, highways, coastal), including DCOs. * Be confident, show initiative, be enthusiastic and outgoing with excellent interpersonal and communication skills, having the ability to liaise at all levels. * Consultancy requires knowledge of project management techniques and methodologies. We expect all candidates to have a passion for project delivery, ensuring client satisfaction is achieved on time and within budget. * Hold a degree in a relevant environmental/sustainability/planning field. * An active network of contacts in infrastructure. * Have project management and people management experience. * Have excellent report writing skills. * Be confident, with excellent communication skills, and be client focussed. * Bring energy and enthusiasm, with attention to detail and a creative approach to problem solving. Experience of any of the following would be useful: * Membership of a relevant environmental institute with either chartership or actively working towards it. * A specialist in one or more of the traditional EIA disciplines, planning or sustainability. * Have a post graduate degree in a related field. * Awareness and understanding of environmental management plans/CEMPs/CoCPs (or equivalent) to support construction property development projects * Be aware of the anticipated future direction of the UK environmental assessment regime and be up-to-date with environmental legislation. * Experience in strategic assessments such as SEA and equivalents. * Property sector EIA. Consultancy requires knowledge of project management techniques and methodologies. We expect all candidates to have a passion for project delivery, ensuring client satisfaction is achieved on time and within budget.
18/04/2024
Full time
The Role The position is for enthusiastic and motivated Principal Consultants who will be part of our EIA teams, with specialisms in infrastructure EIA. In particular we are looking for a candidate to help deliver projects in any of the energy, water, highways, rail and coastal sectors to meet our growing and exciting portfolio of project needs. As a collaborative team we also have cross-working opportunities with our EIA property team. Applicants need to be client focused with a positive and proactive attitude, excellent communication skills and happy to work as part of a team. All roles will work closely with our Planning, Social value and social economics teams and a wide range of external partners, to deliver across a range of projects. The successful candidate will be expected to have a thorough knowledge of EIA, including guidelines and the planning process and a proven track record of managing and leading multidisciplinary teams for EIA, on time and on budget. They will also be expected to have excellent project management, report writing and communication and client liaison skills with a keen eye for detail and a positive attitude towards business development. They will be expected to enhance our diverse project portfolio by leading or contribute to bids for projects of all scales, size and sectors. Their role within project delivery may be as project manager, framework manager and/or technical lead. They would also be expected to assist with the training/mentoring of junior members of the team. We offer flexible hybrid working and would consider candidates across our other locations. The Candidate We expect the successful Principal candidates will: * Have 5-8 years of consulting experience. * Have project delivery experience with a strong work ethic, able to be organised, flexible and motivated. * Have demonstratable experience contributing to and managing the delivery of EIA and related projects, primarily in the infrastructure sector (energy, water, rail, highways, coastal), including DCOs. * Be confident, show initiative, be enthusiastic and outgoing with excellent interpersonal and communication skills, having the ability to liaise at all levels. * Consultancy requires knowledge of project management techniques and methodologies. We expect all candidates to have a passion for project delivery, ensuring client satisfaction is achieved on time and within budget. * Hold a degree in a relevant environmental/sustainability/planning field. * An active network of contacts in infrastructure. * Have project management and people management experience. * Have excellent report writing skills. * Be confident, with excellent communication skills, and be client focussed. * Bring energy and enthusiasm, with attention to detail and a creative approach to problem solving. Experience of any of the following would be useful: * Membership of a relevant environmental institute with either chartership or actively working towards it. * A specialist in one or more of the traditional EIA disciplines, planning or sustainability. * Have a post graduate degree in a related field. * Awareness and understanding of environmental management plans/CEMPs/CoCPs (or equivalent) to support construction property development projects * Be aware of the anticipated future direction of the UK environmental assessment regime and be up-to-date with environmental legislation. * Experience in strategic assessments such as SEA and equivalents. * Property sector EIA. Consultancy requires knowledge of project management techniques and methodologies. We expect all candidates to have a passion for project delivery, ensuring client satisfaction is achieved on time and within budget.
GRADUATE/TRAINEE ENGINEER Location: Highworth Salary: UP TO £35,000 per annum (with annual salary reviews) You could work within a close-knit team who have cornered a market in the manufacturing sector to produce components with a range of industry applications including medical, defence, energy and transport. This role will offer the opportunity for International travel to build relationships with suppliers and customers. You will be working with the Chief Operating Officer who will provide full training within the following: CAD software for both 2D and 3D design tasks. Magnetic modelling using FEM 'EM Works' SolidWorks plug-in software. Cultivate and maintain strong relationships with suppliers and customers. Requirements: Background or qualifications in engineering with a strong technical aptitude. Excellent communication skills with the ability to build rapport with stakeholders. Proactive mindset with a willingness to learn and adapt. Prior experience of a technical role within manufacturing would be beneficial but not essential, university graduates stepping into their first role are very welcome! If you're ready to take on exciting challenges, broaden your skill set, and be part of a supportive team, we want to hear from you! Reach out to me to schedule a discussion and learn more about this opportunity.
18/04/2024
Full time
GRADUATE/TRAINEE ENGINEER Location: Highworth Salary: UP TO £35,000 per annum (with annual salary reviews) You could work within a close-knit team who have cornered a market in the manufacturing sector to produce components with a range of industry applications including medical, defence, energy and transport. This role will offer the opportunity for International travel to build relationships with suppliers and customers. You will be working with the Chief Operating Officer who will provide full training within the following: CAD software for both 2D and 3D design tasks. Magnetic modelling using FEM 'EM Works' SolidWorks plug-in software. Cultivate and maintain strong relationships with suppliers and customers. Requirements: Background or qualifications in engineering with a strong technical aptitude. Excellent communication skills with the ability to build rapport with stakeholders. Proactive mindset with a willingness to learn and adapt. Prior experience of a technical role within manufacturing would be beneficial but not essential, university graduates stepping into their first role are very welcome! If you're ready to take on exciting challenges, broaden your skill set, and be part of a supportive team, we want to hear from you! Reach out to me to schedule a discussion and learn more about this opportunity.
We are recruiting for a Thermal Vacuum Test Engineer for a leading Defence & Space organisation based onsite in Portsmouth. Overview: Thermal Vacuum test engineer required to join the environmental test laboratory team in Portsmouth. Supporting the test requirements of internal business units and external commercial customers. Main Activities: Perform thermal vacuum testing on space and commercial hardware. Perform temperature/humidity testing on space and commercial hardware. Post-processing data test and reporting. Working to national and international standards. Review test procedures, raise quotations against external customer specifications. Managing calibration of test equipment. Assist with costs and scheduling. Maintenance of the associated test facilities. Requirements: Engineering apprenticeship HNC or Engineering Degree At least 5 years' experience of testing in a laboratory environment. Experience of working directly with customers. Ability to work flexible hours weekend/shift working on a rotating pattern. Early Shift 6am -2pm Late Shift 2pm - 10pm Night Shift 10pm - 6am Days Mon - Fri (with the possibility of shift and weekends 6-2/2-10) 20% uplift. Nights 33% Premium rate - 25% Mon-Fri and 50% Sat-Sun This is an umbrella contract, the role is Inside IR35
18/04/2024
Project-based
We are recruiting for a Thermal Vacuum Test Engineer for a leading Defence & Space organisation based onsite in Portsmouth. Overview: Thermal Vacuum test engineer required to join the environmental test laboratory team in Portsmouth. Supporting the test requirements of internal business units and external commercial customers. Main Activities: Perform thermal vacuum testing on space and commercial hardware. Perform temperature/humidity testing on space and commercial hardware. Post-processing data test and reporting. Working to national and international standards. Review test procedures, raise quotations against external customer specifications. Managing calibration of test equipment. Assist with costs and scheduling. Maintenance of the associated test facilities. Requirements: Engineering apprenticeship HNC or Engineering Degree At least 5 years' experience of testing in a laboratory environment. Experience of working directly with customers. Ability to work flexible hours weekend/shift working on a rotating pattern. Early Shift 6am -2pm Late Shift 2pm - 10pm Night Shift 10pm - 6am Days Mon - Fri (with the possibility of shift and weekends 6-2/2-10) 20% uplift. Nights 33% Premium rate - 25% Mon-Fri and 50% Sat-Sun This is an umbrella contract, the role is Inside IR35
Thermal Vacuum Test Engineer 6 months Portsmouth - onsite requirement An innovative company at the forefront of the aerospace industry, located in Portsmouth is actively seeking a Thermal Vacuum Test Engineer to join its engineering team. The company is globally recognized for its innovation and contributions to the aviation industry. Job Overview: We're seeking a Thermal Vacuum Test Engineer to join the environmental test laboratory team at Portsmouth. In this role, you'll support both internal business units and external commercial customers by fulfilling their testing requirements. Key Responsibilities: Conduct thermal vacuum testing on both space and commercial hardware. Perform temperature/humidity testing on space and commercial hardware. Analyze test data and generate comprehensive reports. Adhere to national and international standards in all testing activities. Review test procedures and prepare quotations based on external customer specifications. Requirements: Completion of an engineering apprenticeship HNC or an Engineering Degree. Minimum of 5 years' experience in laboratory testing. Proven track record of working directly with customers. If you envision playing a key role in enhancing communities through innovative Engineering Systems solutions, then this opportunity aligns perfectly with your aspirations. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
18/04/2024
Project-based
Thermal Vacuum Test Engineer 6 months Portsmouth - onsite requirement An innovative company at the forefront of the aerospace industry, located in Portsmouth is actively seeking a Thermal Vacuum Test Engineer to join its engineering team. The company is globally recognized for its innovation and contributions to the aviation industry. Job Overview: We're seeking a Thermal Vacuum Test Engineer to join the environmental test laboratory team at Portsmouth. In this role, you'll support both internal business units and external commercial customers by fulfilling their testing requirements. Key Responsibilities: Conduct thermal vacuum testing on both space and commercial hardware. Perform temperature/humidity testing on space and commercial hardware. Analyze test data and generate comprehensive reports. Adhere to national and international standards in all testing activities. Review test procedures and prepare quotations based on external customer specifications. Requirements: Completion of an engineering apprenticeship HNC or an Engineering Degree. Minimum of 5 years' experience in laboratory testing. Proven track record of working directly with customers. If you envision playing a key role in enhancing communities through innovative Engineering Systems solutions, then this opportunity aligns perfectly with your aspirations. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.