Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
18/04/2024
Project-based
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
FPGA Design Engineer Stevenage - Dependant on experience, MBDAs Bolton or Bristol sites may be an option for location, on the understanding that travel to Stevenage will be required periodically. SC required before starting Early Starter? No 12 Months - Likely To Be Extended Full Time - Flexible WFH Available where possible £70 - £90/hour (Umbrella) FPGA design experience FPGA verification experience VHDL language skills Overview of department: For this role, we are seeking an experienced FPGA design and verification engineer (~4+ years), to support the development of our growing portfolio of complex FPGA projects. The current portfolio ranges from advanced signal processing systems (Image/Radio), core Embedded processing systems, through to safety & security critical systems. Responsibilities: The role involves working at all phases of the FPGA design and verification cycle; hence, the candidate would be responsible some of the following key activities: Generating complex FPGA architectures and design implementations (VHDL, Simulink etc), targeting Xilinx, Intel, Microsemi devices. Verifying complex FPGA implementations using VHDL and System Verilog/UVM test-bench methodologies. Using FPGA design toolsets and Mentor verification tools (QuestaSim & ModelSim). Generating low-level software (C) to facilitate FPGA test and integration with the wider Embedded system. Configuring and Documenting designs to a high professional standard. Working as part of a multidiscipline team to deliver complex FPGA based projects. Skillset/experience required: Ideally we are looking for candidates that are Degree qualified (or equivalent) with significant experience in FPGA development. Competent VHDL Language and Design Skills. Competent Verification Skills using VHDL and SystemVerilog methodologies A deep proven level of experience designing for Xilinx, Intel or Microsemi FPGAs Experience of professionally configuring and documenting designs Experience of working as part of a large multidiscipline team
18/04/2024
Project-based
FPGA Design Engineer Stevenage - Dependant on experience, MBDAs Bolton or Bristol sites may be an option for location, on the understanding that travel to Stevenage will be required periodically. SC required before starting Early Starter? No 12 Months - Likely To Be Extended Full Time - Flexible WFH Available where possible £70 - £90/hour (Umbrella) FPGA design experience FPGA verification experience VHDL language skills Overview of department: For this role, we are seeking an experienced FPGA design and verification engineer (~4+ years), to support the development of our growing portfolio of complex FPGA projects. The current portfolio ranges from advanced signal processing systems (Image/Radio), core Embedded processing systems, through to safety & security critical systems. Responsibilities: The role involves working at all phases of the FPGA design and verification cycle; hence, the candidate would be responsible some of the following key activities: Generating complex FPGA architectures and design implementations (VHDL, Simulink etc), targeting Xilinx, Intel, Microsemi devices. Verifying complex FPGA implementations using VHDL and System Verilog/UVM test-bench methodologies. Using FPGA design toolsets and Mentor verification tools (QuestaSim & ModelSim). Generating low-level software (C) to facilitate FPGA test and integration with the wider Embedded system. Configuring and Documenting designs to a high professional standard. Working as part of a multidiscipline team to deliver complex FPGA based projects. Skillset/experience required: Ideally we are looking for candidates that are Degree qualified (or equivalent) with significant experience in FPGA development. Competent VHDL Language and Design Skills. Competent Verification Skills using VHDL and SystemVerilog methodologies A deep proven level of experience designing for Xilinx, Intel or Microsemi FPGAs Experience of professionally configuring and documenting designs Experience of working as part of a large multidiscipline team
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
18/04/2024
Project-based
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
Robert Walters is working in partnership with a UK leading utility infrastructure services provider. A multibillion turnover over business, specialising in providing services across water, energy, transport, and telecoms. Due to continued growth, they are keen to expand their finance systems support business. As such, they are keen to appoint an Oracle Financial Consolidation and Close Cloud Service (FCCS) Administrator. You will provide leadership in ensuring finance systems support business challenges and enhancements to underlying business processes. The permanent opportunity for an Oracle Financial Consolidation and Close Cloud Service (FCCS), will pay a salary range of £75,000 to £90,000 plus car cash allowance and bonus with a hybrid working model. Oracle Financial Consolidation and Close Cloud Service (FCCS): Duties Responsible for the Financial Consolidation & Close Cloud Services (FCCS) applications Lead Oracle Enterprise Performance Management (EPM) environment Identify improvement opportunities and work with multiple business units Configure/Set Up/Support of Oracle FCCS applications Manage user access, role and security privileges within FCCS apps Sys Admin for production system and integration with external systems Monitor system performance, troubleshooting issues - patches and updates Provide technical support to end-users Ensure change management approval processes are followed Manage incidents and service requests - inception to completion Act as point of contact for business and third parties for issue resolution and problem management Maintain documentation related to system config, process and procedures Oracle Financial Consolidation and Close Cloud Service (FCCS): Experience Strong financial accounting experience administration experience with Oracle FCCS solutions experience in supporting and implementing FCCS Proficiency in EPM Automate Experience in Oracle PBCS, ARCS and Reporting (OTBI, SQL) desirable System integration experience desirable Business Intelligence software experience desirable Information security. Knowledge of enterprise architecture The permanent opportunity for an Oracle Financial Consolidation and Close Cloud Service (FCCS) will pay a salary range of £75,000 to £90,000 plus car cash allowance and bonus with a hybrid working model. This is an opportunity to join a UK market leader, that has grown year on year. For further information, please apply with an updated CV and contact Ajay Hayre on (see below) Robert Walters Operations Limited is an employment business and employment agency and welcomes applications from all candidates
17/04/2024
Full time
Robert Walters is working in partnership with a UK leading utility infrastructure services provider. A multibillion turnover over business, specialising in providing services across water, energy, transport, and telecoms. Due to continued growth, they are keen to expand their finance systems support business. As such, they are keen to appoint an Oracle Financial Consolidation and Close Cloud Service (FCCS) Administrator. You will provide leadership in ensuring finance systems support business challenges and enhancements to underlying business processes. The permanent opportunity for an Oracle Financial Consolidation and Close Cloud Service (FCCS), will pay a salary range of £75,000 to £90,000 plus car cash allowance and bonus with a hybrid working model. Oracle Financial Consolidation and Close Cloud Service (FCCS): Duties Responsible for the Financial Consolidation & Close Cloud Services (FCCS) applications Lead Oracle Enterprise Performance Management (EPM) environment Identify improvement opportunities and work with multiple business units Configure/Set Up/Support of Oracle FCCS applications Manage user access, role and security privileges within FCCS apps Sys Admin for production system and integration with external systems Monitor system performance, troubleshooting issues - patches and updates Provide technical support to end-users Ensure change management approval processes are followed Manage incidents and service requests - inception to completion Act as point of contact for business and third parties for issue resolution and problem management Maintain documentation related to system config, process and procedures Oracle Financial Consolidation and Close Cloud Service (FCCS): Experience Strong financial accounting experience administration experience with Oracle FCCS solutions experience in supporting and implementing FCCS Proficiency in EPM Automate Experience in Oracle PBCS, ARCS and Reporting (OTBI, SQL) desirable System integration experience desirable Business Intelligence software experience desirable Information security. Knowledge of enterprise architecture The permanent opportunity for an Oracle Financial Consolidation and Close Cloud Service (FCCS) will pay a salary range of £75,000 to £90,000 plus car cash allowance and bonus with a hybrid working model. This is an opportunity to join a UK market leader, that has grown year on year. For further information, please apply with an updated CV and contact Ajay Hayre on (see below) Robert Walters Operations Limited is an employment business and employment agency and welcomes applications from all candidates
An Antenna Design Engineer is required for a predominantly onsite role in Stevenage. Required: * Design and develop RF and microwave antennas which will be used in Datalinks. * Interact with internal customers and suppliers to understand antenna design requirements, volume constraints and environmental specifications so that the final design is compliant with the overall requirements * Provide technical advice and assistance in pursuance of existing and new business, particularly in the fields of Antenna Design Capabilities, RF & Microwave Engineering and ensure the effectiveness and competitiveness of the proposed technical solutions * Diagnose Antenna issues using various methods; eg visual inspection, data analysis in design * Design, simulation & layout using HFSS (understanding limitations of different solvers) * Design and optimisation of array feed networks * Complex Antenna Array simulations/optimisation using HPC/cluster Skillset/experience required: * RF/Microwave Antenna Design (Narrowband and Wideband) * RF/Microwave Antenna Array Design * Antenna test and trials in an anechoic chamber * Manufacturing techniques, capabilities and constraints * Use of vector network analysers and other test equipment * Assessment of installed RCS performance of an Antenna * Awareness of meta-materials technologies * Appreciation of mechanical design & module packaging * Appreciation of mixed signal board techniques * Appreciation of active Microwave, RF and Analogue Design * Clear understanding of engineering tools, processes and procedures * Be conversant with RF/Microwave design tools including HFSS and MATLAB (CST/ADS/FEKO is also desirable but not essential) * Process complex array data using MATLAB * Take early prototype designs into serial production * Be able to write high quality test requirements and test reports * Generate plan of activities and manage own work * Consistent ability to deliver required output within agreed timescales Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
17/04/2024
Project-based
An Antenna Design Engineer is required for a predominantly onsite role in Stevenage. Required: * Design and develop RF and microwave antennas which will be used in Datalinks. * Interact with internal customers and suppliers to understand antenna design requirements, volume constraints and environmental specifications so that the final design is compliant with the overall requirements * Provide technical advice and assistance in pursuance of existing and new business, particularly in the fields of Antenna Design Capabilities, RF & Microwave Engineering and ensure the effectiveness and competitiveness of the proposed technical solutions * Diagnose Antenna issues using various methods; eg visual inspection, data analysis in design * Design, simulation & layout using HFSS (understanding limitations of different solvers) * Design and optimisation of array feed networks * Complex Antenna Array simulations/optimisation using HPC/cluster Skillset/experience required: * RF/Microwave Antenna Design (Narrowband and Wideband) * RF/Microwave Antenna Array Design * Antenna test and trials in an anechoic chamber * Manufacturing techniques, capabilities and constraints * Use of vector network analysers and other test equipment * Assessment of installed RCS performance of an Antenna * Awareness of meta-materials technologies * Appreciation of mechanical design & module packaging * Appreciation of mixed signal board techniques * Appreciation of active Microwave, RF and Analogue Design * Clear understanding of engineering tools, processes and procedures * Be conversant with RF/Microwave design tools including HFSS and MATLAB (CST/ADS/FEKO is also desirable but not essential) * Process complex array data using MATLAB * Take early prototype designs into serial production * Be able to write high quality test requirements and test reports * Generate plan of activities and manage own work * Consistent ability to deliver required output within agreed timescales Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Role: Storage Engineer Rate: Circa £550 per day inside Location: Onsite in Stevenage Active DV clearance is required for this role We are looking for a skilled Storage Engineer to provide operation support to our client's key customers. You will be responsible for the implementation, support and maintenance of all existing and future infrastructure for both BAU and projects. Skills required; + Windows and Linux environments + Storage technologies ie NetApp + Backup technologies + VMware provisioning, management and decommissioning If you are interested in discussing this Storage Engineer role further, please apply or send a copy of your updated CV to (see below) CBSbutler is acting as an employment agency for this role.
17/04/2024
Project-based
Role: Storage Engineer Rate: Circa £550 per day inside Location: Onsite in Stevenage Active DV clearance is required for this role We are looking for a skilled Storage Engineer to provide operation support to our client's key customers. You will be responsible for the implementation, support and maintenance of all existing and future infrastructure for both BAU and projects. Skills required; + Windows and Linux environments + Storage technologies ie NetApp + Backup technologies + VMware provisioning, management and decommissioning If you are interested in discussing this Storage Engineer role further, please apply or send a copy of your updated CV to (see below) CBSbutler is acting as an employment agency for this role.
Role: Linux Engineer Rate: Circa £550 per day inside Location: Onsite in Stevenage Active DV clearance is required for this role We are looking for a skilled Linux Engineer to monitor and provide support for a key client's infrastructure. This will involve incident and request management, server administration, and change management. Skills required; + Linux environments - Redhat, Solaris + HPC experience + Virtualisation If you are interested in discussing this Storage Engineer role further, please apply or send a copy of your updated CV to (see below) CBSbutler is acting as an employment agency for this role.
17/04/2024
Project-based
Role: Linux Engineer Rate: Circa £550 per day inside Location: Onsite in Stevenage Active DV clearance is required for this role We are looking for a skilled Linux Engineer to monitor and provide support for a key client's infrastructure. This will involve incident and request management, server administration, and change management. Skills required; + Linux environments - Redhat, Solaris + HPC experience + Virtualisation If you are interested in discussing this Storage Engineer role further, please apply or send a copy of your updated CV to (see below) CBSbutler is acting as an employment agency for this role.
Role: Messaging Engineer Rate: Circa £550 per day inside Location: Onsite in Stevenage Active DV clearance is required for this role We are looking for a skilled Messaging Engineer to provide operation support to our client's key customers. You will be experience to a 3rd Line Support level, and have experience with both BAU and projects across Wintel, Storage and Database technologies. Skills required; + Windows Servers and MS Exchange + Messaging desktop clients ie outlook + AV software products (Trend Micro Scanmail), Sophos A/V, Groupshield etc) + Support of SMTP Gateways (Exchange, MailSweeper etc) If you are interested in discussing this Messaging Engineer role further, please apply or send a copy of your updated CV to (see below) CBSbutler is acting as an employment agency for this role.
17/04/2024
Project-based
Role: Messaging Engineer Rate: Circa £550 per day inside Location: Onsite in Stevenage Active DV clearance is required for this role We are looking for a skilled Messaging Engineer to provide operation support to our client's key customers. You will be experience to a 3rd Line Support level, and have experience with both BAU and projects across Wintel, Storage and Database technologies. Skills required; + Windows Servers and MS Exchange + Messaging desktop clients ie outlook + AV software products (Trend Micro Scanmail), Sophos A/V, Groupshield etc) + Support of SMTP Gateways (Exchange, MailSweeper etc) If you are interested in discussing this Messaging Engineer role further, please apply or send a copy of your updated CV to (see below) CBSbutler is acting as an employment agency for this role.
Onsite Messaging Engineer + Long term contract available + Based onsite in Stevenage + £450 to £490 per day + Inside IR35 Key Skills: + Hold current DV Clearance + Exchange 2000 to 2013 As a Messaging Engineer you will contribute to this by providing expert Messaging operational support to 20+ customers as part of a managed service agreement. Your role will involve: Provide 3rd Line Messaging Support to a range of customers in accordance with defined standards and agreed SLAs. The Messaging Team forms part of wider service team, which is responsible for providing BAU and project support across a range of Wintel, Storage and Database. The environment is busy, fast paced and challenging with new work streams and opportunities being introduced into the team regularly. Your transferable skills and experience: Experience of MSCE Windows 2000/2003 and MCP MS Exchange 2000/2003/2007/2010/2013 Ability to deal with complex issues/potential escalations with minimal supervision. Messaging desktop clients, eg Outlook Helpdesk/problem control and management services Support of Microsoft Exchange 2003/2010/2013 standalone and clustered Experience and support of AV software products (Trend Micro Scanmail), Sophos A/V, Groupshield etc) Support of SMTP Gateways (Exchange, MailSweeper etc) Experience and support of Exchange FAX Solutions E-mail archiving tools, eg Enterprise Vault, SourceOne Security and SPAM protection products, eg IronPort
17/04/2024
Project-based
Onsite Messaging Engineer + Long term contract available + Based onsite in Stevenage + £450 to £490 per day + Inside IR35 Key Skills: + Hold current DV Clearance + Exchange 2000 to 2013 As a Messaging Engineer you will contribute to this by providing expert Messaging operational support to 20+ customers as part of a managed service agreement. Your role will involve: Provide 3rd Line Messaging Support to a range of customers in accordance with defined standards and agreed SLAs. The Messaging Team forms part of wider service team, which is responsible for providing BAU and project support across a range of Wintel, Storage and Database. The environment is busy, fast paced and challenging with new work streams and opportunities being introduced into the team regularly. Your transferable skills and experience: Experience of MSCE Windows 2000/2003 and MCP MS Exchange 2000/2003/2007/2010/2013 Ability to deal with complex issues/potential escalations with minimal supervision. Messaging desktop clients, eg Outlook Helpdesk/problem control and management services Support of Microsoft Exchange 2003/2010/2013 standalone and clustered Experience and support of AV software products (Trend Micro Scanmail), Sophos A/V, Groupshield etc) Support of SMTP Gateways (Exchange, MailSweeper etc) Experience and support of Exchange FAX Solutions E-mail archiving tools, eg Enterprise Vault, SourceOne Security and SPAM protection products, eg IronPort
3rd Line support Ideally, the candidate should have over 3-5 years of experience working with Cisco UC Environments Cisco CCNA or CCNP Collaboration certification is advantageous Management of Datacentre Equipment including Cisco Rack Servers like BE7000H, UCS-C220, UCS-C240, etc. VMware ESXi Management and VM Administration Administration of Cisco UC Servers (Cisco Unified Communication Manager, Cisco Unified IM and Presence, Cisco Unity Connection) Experience in administration of Cisco Expressway Clusters Administration of Cisco SBCs (Cisco Unified Border Elements) Strong understanding of SIP Protocol, ability to analyse SIP Traces, and administration of Cisco Endpoints (Deskphones and Videoconferencing Systems) Ability to independently implement changes on the Cisco UC Platform (System upgrades, Certificate Renewals, etc.) Understanding of Call Routing on Cisco CUCM Ability to analyse and troubleshoot problems in the Cisco UC Environment and 3rd-party applications Handling and support of technical escalations with Vendors Desired: Experience with Cisco Rooms Desired: Experience with Cisco Meeting Server and troubleshooting
17/04/2024
Full time
3rd Line support Ideally, the candidate should have over 3-5 years of experience working with Cisco UC Environments Cisco CCNA or CCNP Collaboration certification is advantageous Management of Datacentre Equipment including Cisco Rack Servers like BE7000H, UCS-C220, UCS-C240, etc. VMware ESXi Management and VM Administration Administration of Cisco UC Servers (Cisco Unified Communication Manager, Cisco Unified IM and Presence, Cisco Unity Connection) Experience in administration of Cisco Expressway Clusters Administration of Cisco SBCs (Cisco Unified Border Elements) Strong understanding of SIP Protocol, ability to analyse SIP Traces, and administration of Cisco Endpoints (Deskphones and Videoconferencing Systems) Ability to independently implement changes on the Cisco UC Platform (System upgrades, Certificate Renewals, etc.) Understanding of Call Routing on Cisco CUCM Ability to analyse and troubleshoot problems in the Cisco UC Environment and 3rd-party applications Handling and support of technical escalations with Vendors Desired: Experience with Cisco Rooms Desired: Experience with Cisco Meeting Server and troubleshooting
Role: Linux Engineer Rate: Circa £550 per day inside Location: Onsite in Stevenage Active DV clearance is required for this role We are looking for a skilled Linux Engineer to monitor and provide support for a key client's infrastructure. This will involve incident and request management, server administration, and change management. Skills required; + Linux environments - Redhat, Solaris + HPC experience + Virtualisation If you are interested in discussing this Storage Engineer role further, please apply or send a copy of your updated CV to (see below) CBSbutler is acting as an employment agency for this role.
15/04/2024
Project-based
Role: Linux Engineer Rate: Circa £550 per day inside Location: Onsite in Stevenage Active DV clearance is required for this role We are looking for a skilled Linux Engineer to monitor and provide support for a key client's infrastructure. This will involve incident and request management, server administration, and change management. Skills required; + Linux environments - Redhat, Solaris + HPC experience + Virtualisation If you are interested in discussing this Storage Engineer role further, please apply or send a copy of your updated CV to (see below) CBSbutler is acting as an employment agency for this role.
Role: Messaging Engineer Salary: Up to £55,000 per annum + bonus Location: Onsite in Stevenage Security clearance will be required for this role. We are looking for a skilled Messaging Engineer to provide operation support to our client's key customers. You will be experience to a 3rd Line Support level, and have experience with both BAU and projects across Wintel, Storage and Database technologies. Skills required; + Windows Servers and MS Exchange + Messaging desktop clients ie outlook + AV software products (Trend Micro Scanmail), Sophos A/V, Groupshield etc) + Support of SMTP Gateways (Exchange, MailSweeper etc) If you are interested in discussing this Messaging Engineer role further, please apply or send a copy of your updated CV to (see below) CBSbutler is acting as an employment business for this role.
15/04/2024
Full time
Role: Messaging Engineer Salary: Up to £55,000 per annum + bonus Location: Onsite in Stevenage Security clearance will be required for this role. We are looking for a skilled Messaging Engineer to provide operation support to our client's key customers. You will be experience to a 3rd Line Support level, and have experience with both BAU and projects across Wintel, Storage and Database technologies. Skills required; + Windows Servers and MS Exchange + Messaging desktop clients ie outlook + AV software products (Trend Micro Scanmail), Sophos A/V, Groupshield etc) + Support of SMTP Gateways (Exchange, MailSweeper etc) If you are interested in discussing this Messaging Engineer role further, please apply or send a copy of your updated CV to (see below) CBSbutler is acting as an employment business for this role.
Electrical Manufacturing Technician We are currently searching on behalf of one of our clients for an Electrical Manufacturing Technician - the details of the role and skills required are below £30,000 - £39,000 Depending on Experience, plus 25 days holiday, paid overtime and a very generous pension scheme. The successful candidate will be able to deliver manufacturing projects which are fully compliant and finished within build time. Good communication skills, diligence and keeping a good housekeeping quality are key for this role. Hybrid options available (within the UK). If this kind of opportunity could be of interest to you, or if you're open to speaking about career options, please get in touch by calling or emailing
15/04/2024
Full time
Electrical Manufacturing Technician We are currently searching on behalf of one of our clients for an Electrical Manufacturing Technician - the details of the role and skills required are below £30,000 - £39,000 Depending on Experience, plus 25 days holiday, paid overtime and a very generous pension scheme. The successful candidate will be able to deliver manufacturing projects which are fully compliant and finished within build time. Good communication skills, diligence and keeping a good housekeeping quality are key for this role. Hybrid options available (within the UK). If this kind of opportunity could be of interest to you, or if you're open to speaking about career options, please get in touch by calling or emailing
Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen + Gym onsite Experience needed: Experience in assembling mechanical components from smaller fixtures to larger and more complex systems. As well as this, it is essential the successful Mechanical Manufacturing Technician is able to complete and certify hardware builds by following detailed planning instructions and drawings. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Mechanical Manufacturing Technician to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Communicating best practice to other team members. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
15/04/2024
Full time
Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen + Gym onsite Experience needed: Experience in assembling mechanical components from smaller fixtures to larger and more complex systems. As well as this, it is essential the successful Mechanical Manufacturing Technician is able to complete and certify hardware builds by following detailed planning instructions and drawings. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Mechanical Manufacturing Technician to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Communicating best practice to other team members. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Supplier Development Manager Location : Stevenage - Dynamic Working Hours Salary : Up to £50,000 Experience needed : Experience in ensuring effective supplier performance, capability and risk management, and implementing both Legacy and cutting-edge technologies. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Influencing the evolution of the company's business environment Improving internal working practices to drive efficiency and effectiveness Handling supplier performance in terms of delivery and quality Collaborating with fellow procurement professionals, with internal collaborators (internal customers, procurement colleagues, technical and quality authorities) and with key suppliers Influence training and development programmes in Procurement and Quality knowledge What we need from you: Experience of supply chain management/Supplier Development Manager in the Aerospace, Defence or Manufacturing environments is desirable Demonstrated ability to improve Supplier Performance (Delivery and Quality) using appropriate tools and lean methodologies Handling a portfolio of suppliers on a day-to-day basis and reporting into designated project the performance and handle supply chain risks to closure Assess supply chain and suppliers' capability to meet the delivery profile for both current state vs Future state Proficient in creating/validating process flows, lead time analysis, understanding capacity bottlenecks, yield, resources, and sub-tier mapping activities to form an industrial view of supplier Hold excellent problem-solving skills and understanding of techniques such as DMAIC (Define, Measure, Analyse, Improve, Control) to develop and implement root cause analysis and improvement plans within Supply Chain Identify, Advance, and mitigate potential Supply Chain Risks and put in place associated improvement and mitigation plans Conducting analysis and providing/delivering executive summaries Additionally, you may be responsible/assist in department supply chain excellence improvements If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
12/04/2024
Full time
Position Available : Supplier Development Manager Location : Stevenage - Dynamic Working Hours Salary : Up to £50,000 Experience needed : Experience in ensuring effective supplier performance, capability and risk management, and implementing both Legacy and cutting-edge technologies. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Influencing the evolution of the company's business environment Improving internal working practices to drive efficiency and effectiveness Handling supplier performance in terms of delivery and quality Collaborating with fellow procurement professionals, with internal collaborators (internal customers, procurement colleagues, technical and quality authorities) and with key suppliers Influence training and development programmes in Procurement and Quality knowledge What we need from you: Experience of supply chain management/Supplier Development Manager in the Aerospace, Defence or Manufacturing environments is desirable Demonstrated ability to improve Supplier Performance (Delivery and Quality) using appropriate tools and lean methodologies Handling a portfolio of suppliers on a day-to-day basis and reporting into designated project the performance and handle supply chain risks to closure Assess supply chain and suppliers' capability to meet the delivery profile for both current state vs Future state Proficient in creating/validating process flows, lead time analysis, understanding capacity bottlenecks, yield, resources, and sub-tier mapping activities to form an industrial view of supplier Hold excellent problem-solving skills and understanding of techniques such as DMAIC (Define, Measure, Analyse, Improve, Control) to develop and implement root cause analysis and improvement plans within Supply Chain Identify, Advance, and mitigate potential Supply Chain Risks and put in place associated improvement and mitigation plans Conducting analysis and providing/delivering executive summaries Additionally, you may be responsible/assist in department supply chain excellence improvements If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Digital Electronic Engineer Location : Stevenage - Dynamic Working Hours Salary : Up to £53,000 + Paid Overtime, Company Bonus, Very Good Pension Package and On-site Gym Experience needed : Board level design around FPGA and SoC, interfacing with leading RF systems and developing electronic technical systems. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Digital Electronic Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Ensuring robust electronics design Using development techniques such as DFMEA Proving activities to ensure compliance against requirements Ensuring products meet their quality, rate, and cost targets What we need from you: Ideally, Degree qualified with significant post qualification experience in Electronic Design, development and delivery - preferably in defence or related industry. Excellent problem-solving skills and knowledge of a wide range of electronic technologies and products. Strong communication skills, both written and verbal, with the ability to influence and negotiate with stakeholders across the business. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
12/04/2024
Full time
Position Available : Digital Electronic Engineer Location : Stevenage - Dynamic Working Hours Salary : Up to £53,000 + Paid Overtime, Company Bonus, Very Good Pension Package and On-site Gym Experience needed : Board level design around FPGA and SoC, interfacing with leading RF systems and developing electronic technical systems. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Digital Electronic Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Ensuring robust electronics design Using development techniques such as DFMEA Proving activities to ensure compliance against requirements Ensuring products meet their quality, rate, and cost targets What we need from you: Ideally, Degree qualified with significant post qualification experience in Electronic Design, development and delivery - preferably in defence or related industry. Excellent problem-solving skills and knowledge of a wide range of electronic technologies and products. Strong communication skills, both written and verbal, with the ability to influence and negotiate with stakeholders across the business. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £48,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
12/04/2024
Full time
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £48,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!