Job Title: Junior Surveillance Mechanical Engineer Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset Job Description: As a mechanical surveillance engineer, you will join EIRA team in charge of the surveillance of the manufacturing and installation of nuclear equipment for worldwide power plants. It is a rewarding experience that starts with comprehensive training and tutoring, with the objective of good respect of the contractual technical requirements, the manufacturing and installation follow-up of equipment's with the highest quality and safety level. The surveillance engineer is a key player during the installation phases as an in-the-field representative. The surveillance engineer works closely with the other departments (quality, installation, project, engineering, procurement, expediting, cost) to ensure the conformity of the manufacturing or installation activities and of equipment's on factories or construction site. EIRA team also gives the opportunity to develop technical skills on a wider range of equipment's, such as pressure vessel, steam generators, pumps, valves, instrumentation, and offers worldwide opportunity of experience. is looking for a Mechanical Engineer for the surveillance of the primary loop installation activities for the Hinkley Point EPR construction site. Main Responsibilities: Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning Ensure the surveillance plan is respected Review the Follow up Documents and End of Installation reports Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures ) Organize your own schedules of surveillance activities with the surveillance leader Contribute to open points treatments and closure Participate to progress meetings with installation, projects, suppliers or customers Key Skills and experiences: Min 1 year experience with technical degree qualification Manufacturing processes knowledge (welding, foundry, forge ) Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge Quality fundamentals knowledge Ability to read and understand the technical engineering documents of scheme Fluent English (spoken and written) Organisation Capability to defend and explain own observations Being critical and analytical minded to be able to identify deviations and to contribute to their resolution Autonomy to manage the surveillance on-site schedule or business trip Team working Qualifications Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. Knowledge in welding or non destructive testing - desirable. Additional information Training: several months training periods on various localisation in France and Europe. Some out of hours working will be required
27/03/2024
Project-based
Job Title: Junior Surveillance Mechanical Engineer Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset Job Description: As a mechanical surveillance engineer, you will join EIRA team in charge of the surveillance of the manufacturing and installation of nuclear equipment for worldwide power plants. It is a rewarding experience that starts with comprehensive training and tutoring, with the objective of good respect of the contractual technical requirements, the manufacturing and installation follow-up of equipment's with the highest quality and safety level. The surveillance engineer is a key player during the installation phases as an in-the-field representative. The surveillance engineer works closely with the other departments (quality, installation, project, engineering, procurement, expediting, cost) to ensure the conformity of the manufacturing or installation activities and of equipment's on factories or construction site. EIRA team also gives the opportunity to develop technical skills on a wider range of equipment's, such as pressure vessel, steam generators, pumps, valves, instrumentation, and offers worldwide opportunity of experience. is looking for a Mechanical Engineer for the surveillance of the primary loop installation activities for the Hinkley Point EPR construction site. Main Responsibilities: Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning Ensure the surveillance plan is respected Review the Follow up Documents and End of Installation reports Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures ) Organize your own schedules of surveillance activities with the surveillance leader Contribute to open points treatments and closure Participate to progress meetings with installation, projects, suppliers or customers Key Skills and experiences: Min 1 year experience with technical degree qualification Manufacturing processes knowledge (welding, foundry, forge ) Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge Quality fundamentals knowledge Ability to read and understand the technical engineering documents of scheme Fluent English (spoken and written) Organisation Capability to defend and explain own observations Being critical and analytical minded to be able to identify deviations and to contribute to their resolution Autonomy to manage the surveillance on-site schedule or business trip Team working Qualifications Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. Knowledge in welding or non destructive testing - desirable. Additional information Training: several months training periods on various localisation in France and Europe. Some out of hours working will be required
Job Title: Opex Improvement Officer Clearance required: BPSS (Eligible) Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset/possibility to work 1 day a week from home Job Description: Main Responsibilities: You will contribute to the improvement of all the OPEX Quality activities on site for the project with respect to the Management System in force Lead the continuous improvement process and help in the proper application of OPEX tools (visual management including 5S approach, field routines, deployment of work standards, A3 or 8D problem solving methods, suggestion system, etc.) Contribute to the definition of the objectives of the site's annual performance plan (simplification of processes, process expertise, etc.) and supervise their implementation Lead, energize, facilitate the conduct of continuous improvement projects and ensure progress reporting Disseminate and ensure the use of the Framatome group's standard formats Ensure the follow-up of the site's masterplan (prioritized action plan) Provide expertise and training to managers in the areas of problem solving Provide support to all employees in the use of Excellence, human reliability or project management tools. Key Skills and experiences: You have an engineer degree with ideally a first experience in the field of quality and engineering. You have operational experience in an industrial environment on a production site of at least 5 years (Production, Maintenance, Methods, etc.) You have knowledge and experience in Lean You have knowledge of project management You are field-oriented and results-oriented You demonstrate an ability to convince, unite and lead change Background: Nuclear, Off-shore, Aerospace, Nuclear manufacturing Additional information No job travel, on site Full Time
27/03/2024
Project-based
Job Title: Opex Improvement Officer Clearance required: BPSS (Eligible) Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset/possibility to work 1 day a week from home Job Description: Main Responsibilities: You will contribute to the improvement of all the OPEX Quality activities on site for the project with respect to the Management System in force Lead the continuous improvement process and help in the proper application of OPEX tools (visual management including 5S approach, field routines, deployment of work standards, A3 or 8D problem solving methods, suggestion system, etc.) Contribute to the definition of the objectives of the site's annual performance plan (simplification of processes, process expertise, etc.) and supervise their implementation Lead, energize, facilitate the conduct of continuous improvement projects and ensure progress reporting Disseminate and ensure the use of the Framatome group's standard formats Ensure the follow-up of the site's masterplan (prioritized action plan) Provide expertise and training to managers in the areas of problem solving Provide support to all employees in the use of Excellence, human reliability or project management tools. Key Skills and experiences: You have an engineer degree with ideally a first experience in the field of quality and engineering. You have operational experience in an industrial environment on a production site of at least 5 years (Production, Maintenance, Methods, etc.) You have knowledge and experience in Lean You have knowledge of project management You are field-oriented and results-oriented You demonstrate an ability to convince, unite and lead change Background: Nuclear, Off-shore, Aerospace, Nuclear manufacturing Additional information No job travel, on site Full Time
Your key responsibilities Deployment, commissioning, and integration of VM for Harrisburg project (mostly Amdocs NAP/OCS/DRA) Maintenance of OS - Centos - Redhat Integration of VM into monitoring and observability platforms - elastic logging Monitoring of infrastructure (cloud, OS) - slack/prometheus Maintenance of onboarding assets - ansible playbooks Maintenance and development of CI/CD pipeline - ansible/jenkins Your skills Cloud concepts (VM, Openstack) IaC, especially Ansible, Scripting (Python, Shell Scripting) Observability: ELK (Elasticsearch, Logstash, Kibana), Prometheus, Grafana CI/CD: Jenkins Linux (CentOS, RHEL) Agile working practices
27/03/2024
Project-based
Your key responsibilities Deployment, commissioning, and integration of VM for Harrisburg project (mostly Amdocs NAP/OCS/DRA) Maintenance of OS - Centos - Redhat Integration of VM into monitoring and observability platforms - elastic logging Monitoring of infrastructure (cloud, OS) - slack/prometheus Maintenance of onboarding assets - ansible playbooks Maintenance and development of CI/CD pipeline - ansible/jenkins Your skills Cloud concepts (VM, Openstack) IaC, especially Ansible, Scripting (Python, Shell Scripting) Observability: ELK (Elasticsearch, Logstash, Kibana), Prometheus, Grafana CI/CD: Jenkins Linux (CentOS, RHEL) Agile working practices
Job Title: Site Contract & Commercial Officer Clearance required: BPSS Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset Hours: Full time on site/possibility to work 1 day a week from home Job Description: The Site Contract & Commercial Officer will take responsibility for commercial discussions regarding site activities with the customer, in close coordination with Paris C&C team. Responsible for contractual activities linked to site matters, among other coordinating Early Warnings and General communications, in close coordination with Paris C&C team. Facilitating daily interfaces between HPC (the Client) on site and Framatome Project Team. Main Responsibilities Commercial topics Coordinate with HPC to clarify Variation Requests (VAR) and Variation Proposals (VP) Ensure communication with HPC (respectively Framatome) When required, setup dedicated data room Prepare and attend the Change & Opportunity Meetings Coordinate the Early Warnings management Set-up and attend the Risk Reduction Meetings (RRM), and draft the related Minutes of Meeting Follow-up the overall progress (from Early Warning's creation to closing, including actions resulting from Risks Mitigation Meetings) Liaise with HPC to progress and clarify actions expected by HPC, and communicate to Framatome Respectively, liaise with Framatome to progress and clarify actions expected by Framatome, and communicate to HPC Prepare and lead the weekly meetings within Framatome Prepare and lead the weekly meetings between HPC and Framatome Prepare the monthly monitoring and related analyses General Communications (GCs) issued by HPC Where relevant, draft answers for Framatome Pilots' validation Attend the weekly progress meetings with HPC Support the Contract Team based in La Défense Manage any specific work delegated by the Framatome Contract Team in La Défense Attend the monthly CCM (Contract and Commercial Meetings) between HPC and Framatome Expedite, coordinate or lead actions raised in the monthly CCM Coordinate transverse topics Ensure a smooth and effective communication between the respective CCM Teams (HPC and Framatome) Collect any request from HPC related to Contract/Commercial, clarifies them where required and systematically transmits the requests to the corresponding Framatome Manager in France or in UK Define with point(s) of contract in France or in UK the way and the timeframe to respond to HPC: preparation of the answer, internal validation before sending to HPC, presentation to HPC, additional clarifications (in any) Collect any request from Framatome related to Contract/Commercial, clarifies them where required, transmits and explains the requests to the appropriate HPC members Key Skills and experiences: Extensive experience in a similar role, ideally in Large Projects Ideally worked on HPC more than 5 years experience in a similar role Excellent communication skills Results orientation, reliable, analytical capabilities, sense of synthesis Customer orientation English level: High-Elementary (Bright Test reference) at minimum Computer literate: standard Microsoft package Qualifications Bachelors degree is mandatory, Masters degree is desirable Legal or Business School Degree Background: Nuclear, Construction, Engineering, Large projects Additional information Working hours - full time on site at Hinkley Point C
27/03/2024
Project-based
Job Title: Site Contract & Commercial Officer Clearance required: BPSS Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset Hours: Full time on site/possibility to work 1 day a week from home Job Description: The Site Contract & Commercial Officer will take responsibility for commercial discussions regarding site activities with the customer, in close coordination with Paris C&C team. Responsible for contractual activities linked to site matters, among other coordinating Early Warnings and General communications, in close coordination with Paris C&C team. Facilitating daily interfaces between HPC (the Client) on site and Framatome Project Team. Main Responsibilities Commercial topics Coordinate with HPC to clarify Variation Requests (VAR) and Variation Proposals (VP) Ensure communication with HPC (respectively Framatome) When required, setup dedicated data room Prepare and attend the Change & Opportunity Meetings Coordinate the Early Warnings management Set-up and attend the Risk Reduction Meetings (RRM), and draft the related Minutes of Meeting Follow-up the overall progress (from Early Warning's creation to closing, including actions resulting from Risks Mitigation Meetings) Liaise with HPC to progress and clarify actions expected by HPC, and communicate to Framatome Respectively, liaise with Framatome to progress and clarify actions expected by Framatome, and communicate to HPC Prepare and lead the weekly meetings within Framatome Prepare and lead the weekly meetings between HPC and Framatome Prepare the monthly monitoring and related analyses General Communications (GCs) issued by HPC Where relevant, draft answers for Framatome Pilots' validation Attend the weekly progress meetings with HPC Support the Contract Team based in La Défense Manage any specific work delegated by the Framatome Contract Team in La Défense Attend the monthly CCM (Contract and Commercial Meetings) between HPC and Framatome Expedite, coordinate or lead actions raised in the monthly CCM Coordinate transverse topics Ensure a smooth and effective communication between the respective CCM Teams (HPC and Framatome) Collect any request from HPC related to Contract/Commercial, clarifies them where required and systematically transmits the requests to the corresponding Framatome Manager in France or in UK Define with point(s) of contract in France or in UK the way and the timeframe to respond to HPC: preparation of the answer, internal validation before sending to HPC, presentation to HPC, additional clarifications (in any) Collect any request from Framatome related to Contract/Commercial, clarifies them where required, transmits and explains the requests to the appropriate HPC members Key Skills and experiences: Extensive experience in a similar role, ideally in Large Projects Ideally worked on HPC more than 5 years experience in a similar role Excellent communication skills Results orientation, reliable, analytical capabilities, sense of synthesis Customer orientation English level: High-Elementary (Bright Test reference) at minimum Computer literate: standard Microsoft package Qualifications Bachelors degree is mandatory, Masters degree is desirable Legal or Business School Degree Background: Nuclear, Construction, Engineering, Large projects Additional information Working hours - full time on site at Hinkley Point C
Job Title: Risk & Opportunities Officer Clearance required: BPSS Duration: 6 months Location: Hinkley -work 1 day a week from home Inside IR35 Job Description: The essential role of the Project Risk & Opportunity Officer is to ensure in the allocated project scope that risks and opportunities are identified, assessed, prioritized, treated by appropriate action plans and monitored. In order to perform this role, the Risk and Opportunities Officer relies on the project Risk and Opportunities Management Plan, which is based on procedures and associated method and tools, as well as methodologies developed within PCM Business Unit. Main Responsibilities: Organize and conduct Risk and Opportunities general reviews (interviews and working sessions with internal teams and our suppliers) Ensure the programming and animation of specific Risk and Opportunities analyses (from general reviews or requested by the project management) to be carried out Develop, update with the teams and disseminate the Risk and Opportunities registers and the associated summaries Prepare and share the synthesis of major Risks and Opportunities, action plans and decision milestones and ensure their proper execution Periodically consolidate major residual impacts on project planning and costs Contribute to the communication of Risk and Opportunities for internal and customer reporting Contribute to the feedback and continuous improvement of Risk and Opportunities tools and methods Organize, plan and conduct required Risk and Opportunities activities Read and take into account all important documents within allocated scope, such as the contract, budgets, time schedule, specifications, etc. Challenge the participants during these discussions in order to ensure robust identification, assessment of potential impacts and definition of action plans with their milestones Contribute to identify not only the Risks but also the Opportunities and optimization ideas (which can combine Risks and Opportunities depending on scenarios) Keep Risk and Opportunities register updated Prepare TOP 10/20 Risk and Opportunities synthesis to highlight the main stakes and proposed strategy response Ensure the evaluation of residual impacts with Project Manager and Cost Controllers, based on expected results of defined action plans Obtain Risk and Opportunities analysis validation by manager in charge of the corresponding scope Regularly share the progress of Risk and Opportunities analysis with the Project Risk and Opportunties Manager and contribute to monthly reporting Participate to project Risk and Opportunities team meetings and to Risk and Opportunties transverse meetings organized by PCM BU Key Skills and experiences : Proven experience (project management, audit, contract management) as a cross-functional interface with different professions (contract, planning, finance, purchasing, technical managers, project managers, etc.) in an international environment 5 years experience Able to interact with both operational teams and top management, you are pro-active, autonomous, curious and are known for your analytical and synthesis skills and your ability to challenge your partners. You are also persistent, proactive, customer-oriented and result-oriented. Qualifications Client+5 degree in engineering or equivalent Experienced in managing complex projects in the nuclear/industrial sector Background: Nuclear or Construction would be desirable Knowledge of project management methodologies International or multicultural experience Experience in transverse management Additional information Working hours full time Working on site at Hinkley Point C, Bridgwater
27/03/2024
Project-based
Job Title: Risk & Opportunities Officer Clearance required: BPSS Duration: 6 months Location: Hinkley -work 1 day a week from home Inside IR35 Job Description: The essential role of the Project Risk & Opportunity Officer is to ensure in the allocated project scope that risks and opportunities are identified, assessed, prioritized, treated by appropriate action plans and monitored. In order to perform this role, the Risk and Opportunities Officer relies on the project Risk and Opportunities Management Plan, which is based on procedures and associated method and tools, as well as methodologies developed within PCM Business Unit. Main Responsibilities: Organize and conduct Risk and Opportunities general reviews (interviews and working sessions with internal teams and our suppliers) Ensure the programming and animation of specific Risk and Opportunities analyses (from general reviews or requested by the project management) to be carried out Develop, update with the teams and disseminate the Risk and Opportunities registers and the associated summaries Prepare and share the synthesis of major Risks and Opportunities, action plans and decision milestones and ensure their proper execution Periodically consolidate major residual impacts on project planning and costs Contribute to the communication of Risk and Opportunities for internal and customer reporting Contribute to the feedback and continuous improvement of Risk and Opportunities tools and methods Organize, plan and conduct required Risk and Opportunities activities Read and take into account all important documents within allocated scope, such as the contract, budgets, time schedule, specifications, etc. Challenge the participants during these discussions in order to ensure robust identification, assessment of potential impacts and definition of action plans with their milestones Contribute to identify not only the Risks but also the Opportunities and optimization ideas (which can combine Risks and Opportunities depending on scenarios) Keep Risk and Opportunities register updated Prepare TOP 10/20 Risk and Opportunities synthesis to highlight the main stakes and proposed strategy response Ensure the evaluation of residual impacts with Project Manager and Cost Controllers, based on expected results of defined action plans Obtain Risk and Opportunities analysis validation by manager in charge of the corresponding scope Regularly share the progress of Risk and Opportunities analysis with the Project Risk and Opportunties Manager and contribute to monthly reporting Participate to project Risk and Opportunities team meetings and to Risk and Opportunties transverse meetings organized by PCM BU Key Skills and experiences : Proven experience (project management, audit, contract management) as a cross-functional interface with different professions (contract, planning, finance, purchasing, technical managers, project managers, etc.) in an international environment 5 years experience Able to interact with both operational teams and top management, you are pro-active, autonomous, curious and are known for your analytical and synthesis skills and your ability to challenge your partners. You are also persistent, proactive, customer-oriented and result-oriented. Qualifications Client+5 degree in engineering or equivalent Experienced in managing complex projects in the nuclear/industrial sector Background: Nuclear or Construction would be desirable Knowledge of project management methodologies International or multicultural experience Experience in transverse management Additional information Working hours full time Working on site at Hinkley Point C, Bridgwater
Job Title: Manufacturing Engineer - Electromechanical or Electronic Location: Farnborough, UK Contract Duration: 12 months, contract Essential Functions/Responsibilities: 1. Support the Shop Floor in troubleshooting (eg PCBA fault finding); disposition of Non-Conformance Reports (eg Rework/Return to Vendor/Scrap) 2. Support the Shop floor in reducing the Standard Cost and Lead Time of a product. 3. Support Supplier improvement activities 4. Develop manufacturing processes for New Product Introduction and production tools. 5. Ability to use statistical analysis to identify trends and identify cause and effect relationships Skills: 1. Create/Update Manufacturing Documentation (Assembly/Test Instructions) 2. Design necessary fixtures; tooling; test boxes 3. Apply LEAN manufacturing techniques to eliminate/reduce WASTE 4. Justification and implementation of new equipment Qualifications: A Degree in Engineering is preferred. However, the minimum required would be an HNC in an electronics discipline. Desired Characteristics: 1. A minimum of min years' experience in a Manufacturing, or Production Engineering role which includes providing Shop Floor support. 2. Ability to analyse problems, identify root causes and provide efficient solutions, fault find down to component level as required. 3. DOE testing to determine the factors effecting inputs and outputs. 4. Six Sigma, Shainin experience 5. Ability to work cross functionally and the ability to prioritise multiple projects. 6. IPC Class III inspection
26/03/2024
Project-based
Job Title: Manufacturing Engineer - Electromechanical or Electronic Location: Farnborough, UK Contract Duration: 12 months, contract Essential Functions/Responsibilities: 1. Support the Shop Floor in troubleshooting (eg PCBA fault finding); disposition of Non-Conformance Reports (eg Rework/Return to Vendor/Scrap) 2. Support the Shop floor in reducing the Standard Cost and Lead Time of a product. 3. Support Supplier improvement activities 4. Develop manufacturing processes for New Product Introduction and production tools. 5. Ability to use statistical analysis to identify trends and identify cause and effect relationships Skills: 1. Create/Update Manufacturing Documentation (Assembly/Test Instructions) 2. Design necessary fixtures; tooling; test boxes 3. Apply LEAN manufacturing techniques to eliminate/reduce WASTE 4. Justification and implementation of new equipment Qualifications: A Degree in Engineering is preferred. However, the minimum required would be an HNC in an electronics discipline. Desired Characteristics: 1. A minimum of min years' experience in a Manufacturing, or Production Engineering role which includes providing Shop Floor support. 2. Ability to analyse problems, identify root causes and provide efficient solutions, fault find down to component level as required. 3. DOE testing to determine the factors effecting inputs and outputs. 4. Six Sigma, Shainin experience 5. Ability to work cross functionally and the ability to prioritise multiple projects. 6. IPC Class III inspection
DM11 SME 10- 15 Years Experience Northampton (Hybrid) 1st April - 31st Dec What will you be doing? Defining and executing a people transformation plan to upskill the Core Team into the new DM11 technology Managing the BFA wide backlog and prioritise appropriately across the CIO and the Complex Servicing POD Running and controlling all POD related activities within the BFA Sub POD eg stand ups Owning relationship with Product Strategy across all 5 pillars in scope (Core Collections, Recoveries, Digital, Early Intervention and Vulnerable) Cultivating the Complex Servicing Backlog and own/manage the backlog once created including internal Sub POD and POD level prioritisation Shaping and driving and then delivering the Communication/Engagement Strategy for the Complex Servicing POD (working with the Complex Servicing POD Portfolio PMO) Owning the technical solution, providing an end to end assurance that satisfies business needs Acting as the technology expert to whom that business area trusts to realize their aspirations as to how they can best drive their business forward in helping our customers Challenging the status quo; things don't change by themselves, so new thinking is welcomed and applauded Providing a fresh perspective that not only protects our brand but also re-energises Client as a bank with technology at its heart Continuously collaborating with a team of like-minded architects, encouraging each other to find the right technology solutions for the business area Evidence of leadership over a team of architects, providing direction and delivering architectural solutions Track record of managing large scale changes & delivering effective solutions
25/03/2024
Project-based
DM11 SME 10- 15 Years Experience Northampton (Hybrid) 1st April - 31st Dec What will you be doing? Defining and executing a people transformation plan to upskill the Core Team into the new DM11 technology Managing the BFA wide backlog and prioritise appropriately across the CIO and the Complex Servicing POD Running and controlling all POD related activities within the BFA Sub POD eg stand ups Owning relationship with Product Strategy across all 5 pillars in scope (Core Collections, Recoveries, Digital, Early Intervention and Vulnerable) Cultivating the Complex Servicing Backlog and own/manage the backlog once created including internal Sub POD and POD level prioritisation Shaping and driving and then delivering the Communication/Engagement Strategy for the Complex Servicing POD (working with the Complex Servicing POD Portfolio PMO) Owning the technical solution, providing an end to end assurance that satisfies business needs Acting as the technology expert to whom that business area trusts to realize their aspirations as to how they can best drive their business forward in helping our customers Challenging the status quo; things don't change by themselves, so new thinking is welcomed and applauded Providing a fresh perspective that not only protects our brand but also re-energises Client as a bank with technology at its heart Continuously collaborating with a team of like-minded architects, encouraging each other to find the right technology solutions for the business area Evidence of leadership over a team of architects, providing direction and delivering architectural solutions Track record of managing large scale changes & delivering effective solutions
Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, eg Non-conformance reports would be an advantage. ROLE DUTIES: Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. Provide shift cover for holidays, sickness etc (often at short notice) Include the following but other duties may be assigned:- Report directly to the Quality Control Supervisor, responding to a wide variety of Quality control related issues. Liaison with functional groups for all Quality Control related activities/problems. Interface with Customer/Third Party/certifying authority representatives, as required. Provide technical support/guidance to work centres for training process inspectors. Write and revise quality control procedures and related forms Assist in failure analysis Perform Receiving Inspection Completion of pipe maps Administration/sign off/verification of inspections Verify dimensional and inspection reports for product conformance Assure identification and traceability of product and materials at all stages of manufacturing process Write detailed reports as required Generate Non-compliance reports (NCR's) in accordance with applicable procedures Random verification and audit of inspection activities and laboratory testing to support shift. Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples Actively participate in Continuous Improvement initiatives Provide Technical support to work centres & projects on Quality Control requirements Perform any other duties as directed by the Quality Control Supervisor. This position has no supervisory responsibilities QUALIFICATIONS: ONC/HNC from an accredited college, university, or trade school, or strong experience in Quality Control within a manufacturing environment in either or all of the following industries: Extrusion, wire and cable, oil and gas or equivalent combination of education and experience. EXPERIENCE: Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools . Ability to respond to common enquiries from management. Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. Competent on all process inspection activities. Requires working knowledge of Microsoft Word, excel and outlook . Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. Note: The shift pattern for shift workers is 4 shift patterns (Days (7am-7pm) and nights (7pm-7am), Starts again after 4 weeks)
21/03/2024
Project-based
Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, eg Non-conformance reports would be an advantage. ROLE DUTIES: Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. Provide shift cover for holidays, sickness etc (often at short notice) Include the following but other duties may be assigned:- Report directly to the Quality Control Supervisor, responding to a wide variety of Quality control related issues. Liaison with functional groups for all Quality Control related activities/problems. Interface with Customer/Third Party/certifying authority representatives, as required. Provide technical support/guidance to work centres for training process inspectors. Write and revise quality control procedures and related forms Assist in failure analysis Perform Receiving Inspection Completion of pipe maps Administration/sign off/verification of inspections Verify dimensional and inspection reports for product conformance Assure identification and traceability of product and materials at all stages of manufacturing process Write detailed reports as required Generate Non-compliance reports (NCR's) in accordance with applicable procedures Random verification and audit of inspection activities and laboratory testing to support shift. Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples Actively participate in Continuous Improvement initiatives Provide Technical support to work centres & projects on Quality Control requirements Perform any other duties as directed by the Quality Control Supervisor. This position has no supervisory responsibilities QUALIFICATIONS: ONC/HNC from an accredited college, university, or trade school, or strong experience in Quality Control within a manufacturing environment in either or all of the following industries: Extrusion, wire and cable, oil and gas or equivalent combination of education and experience. EXPERIENCE: Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools . Ability to respond to common enquiries from management. Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. Competent on all process inspection activities. Requires working knowledge of Microsoft Word, excel and outlook . Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. Note: The shift pattern for shift workers is 4 shift patterns (Days (7am-7pm) and nights (7pm-7am), Starts again after 4 weeks)