Digital IC Design Engineer | Contract | Cambridge | Up to £70ph DOE | Outside IR35 | Hybrid Are you looking for a new opportunity within the Digital IC Design space? Are you looking to offer your expertise to help scale a growing team? Are you looking to join a fast-growing company working on industry leading technologies in Smartphones, AR/VR & Wearables? Then this might just be the role for you. We are working with an industry leading electronics company that operate in the precision motion solutions space with their work being applied in the Smartphone, AR/VR and Wearables sectors. They are looking to bring in a selection of IC Design Engineers with a digital bias to deliver industry leading IC RTL Design and technical mentoring to a highly skilled, close-knit team. Key Responsibilities: Digital design development for custom IC Integration including the writing of IP design specifications, coding Verilog and SystemVerilog models for simulation, synthesis and static timing analysis and writing automated simulation and verification build scripts. Building automated pre-silicon verification environment whilst supporting early development of Embedded firmware throughout start of project. Integrate and partition in-house designs and IP from third parties and wrap with modelling logic to represent mixed signal design element. Asist with the validation of new silicon chips with a mix between CI/CD automation and manual tests through electrical test equipment. Qualifications and Experience: Strong experience in digital custom IC design. Strong experience in digital IC verification (UVM, SVA, VIP, and UPF), for ASIC implementation. Strong RTL coding with Verilog and System Verilog. Strong knowledge of interface technology (I2C, SPI, UART, SWD, JTAG, etc). Strong knowledge of on-chip bus protocol (AMBA AHB, APB, AXI-Stream, etc). Experience with Linux OS, revision control (Git) and Scripting languages (Bash, Tcl, and Python). Experience with EDA tools for simulation (Siemens Quest), Synthesis (DesignCompiler). Pay rate: Up to £70 ph D.O.E outside IR35
23/04/2024
Project-based
Digital IC Design Engineer | Contract | Cambridge | Up to £70ph DOE | Outside IR35 | Hybrid Are you looking for a new opportunity within the Digital IC Design space? Are you looking to offer your expertise to help scale a growing team? Are you looking to join a fast-growing company working on industry leading technologies in Smartphones, AR/VR & Wearables? Then this might just be the role for you. We are working with an industry leading electronics company that operate in the precision motion solutions space with their work being applied in the Smartphone, AR/VR and Wearables sectors. They are looking to bring in a selection of IC Design Engineers with a digital bias to deliver industry leading IC RTL Design and technical mentoring to a highly skilled, close-knit team. Key Responsibilities: Digital design development for custom IC Integration including the writing of IP design specifications, coding Verilog and SystemVerilog models for simulation, synthesis and static timing analysis and writing automated simulation and verification build scripts. Building automated pre-silicon verification environment whilst supporting early development of Embedded firmware throughout start of project. Integrate and partition in-house designs and IP from third parties and wrap with modelling logic to represent mixed signal design element. Asist with the validation of new silicon chips with a mix between CI/CD automation and manual tests through electrical test equipment. Qualifications and Experience: Strong experience in digital custom IC design. Strong experience in digital IC verification (UVM, SVA, VIP, and UPF), for ASIC implementation. Strong RTL coding with Verilog and System Verilog. Strong knowledge of interface technology (I2C, SPI, UART, SWD, JTAG, etc). Strong knowledge of on-chip bus protocol (AMBA AHB, APB, AXI-Stream, etc). Experience with Linux OS, revision control (Git) and Scripting languages (Bash, Tcl, and Python). Experience with EDA tools for simulation (Siemens Quest), Synthesis (DesignCompiler). Pay rate: Up to £70 ph D.O.E outside IR35
Medical Field Service Engineer A competitive salary plus benefits - outlined below! Who is the company? An exciting new opportunity for a Field Service Engineer is now available working for a manufacturer for medical devices. What is the role? As a Field Service Engineer you will be required to service and repair medical equipment found within NHS hospitals. Key responsibilities are as follows; To carry out routine servicing of equipment. To carry out routine adjustments of equipment, where necessary. To maintain adequate stock levels of spare parts within guidelines. To maintain quality documentation records for submission to the customer via approved systems. To cultivate a positive rapport with the customer, always demonstrating first class interpersonal skills in a courteous and professional manner. This role will be home based, travelling to customers predominantly based in and around the Somerset area. This role will be best suited to those with prior Biomedical Engineering experience. The Medical Service Engineer's working hours are Monday to Friday, 40hrs a week including travel (door to door). What package is on offer? £30-40,000 Company car or car allowance Bonus Paid overtime Private Pension Private medical care Life Assurance 25 days holiday + bank holiday Laptop, phone and tools What experience is needed to apply? Previous medical device maintenance experience eg as a field service engineer, biomedical engineer, ebme engineer, eme engineer, clinical engineer etc. UK driving licence Good customer service, team worker and communication skills What happens next? Click APPLY NOW to being your application. Should you be suitable, a CBSbutler representative to contact you within 5 working days.
23/04/2024
Full time
Medical Field Service Engineer A competitive salary plus benefits - outlined below! Who is the company? An exciting new opportunity for a Field Service Engineer is now available working for a manufacturer for medical devices. What is the role? As a Field Service Engineer you will be required to service and repair medical equipment found within NHS hospitals. Key responsibilities are as follows; To carry out routine servicing of equipment. To carry out routine adjustments of equipment, where necessary. To maintain adequate stock levels of spare parts within guidelines. To maintain quality documentation records for submission to the customer via approved systems. To cultivate a positive rapport with the customer, always demonstrating first class interpersonal skills in a courteous and professional manner. This role will be home based, travelling to customers predominantly based in and around the Somerset area. This role will be best suited to those with prior Biomedical Engineering experience. The Medical Service Engineer's working hours are Monday to Friday, 40hrs a week including travel (door to door). What package is on offer? £30-40,000 Company car or car allowance Bonus Paid overtime Private Pension Private medical care Life Assurance 25 days holiday + bank holiday Laptop, phone and tools What experience is needed to apply? Previous medical device maintenance experience eg as a field service engineer, biomedical engineer, ebme engineer, eme engineer, clinical engineer etc. UK driving licence Good customer service, team worker and communication skills What happens next? Click APPLY NOW to being your application. Should you be suitable, a CBSbutler representative to contact you within 5 working days.
Mechaniker (m/w/d) - pharmazeutischen Produktion/GMP/Google- und Standard PC- Programmen/Lean/Agile/Pikettdienst/Deutsch Projekt : Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir einen Mechaniker (m/w/d). Hintergrund : Bei Roche arbeiten 94'000 Menschen in über 100 Ländern an der Zukunft der Gesundheitsversorgung. Gemeinsam wurden wir eines der führenden, forschenden Pharmaunternehmen. Unser Erfolg basiert auf Innovation, Neugier und Diversität. Mit seinen 1400 Mitarbeitenden stellt das Produktionszentrum Kaiseraugst (PTGA) die ununterbrochene Patientenversorgung mit qualitativ hochwertigen Medikamenten sicher. PTGA steht für die höchsten Standards der pharmazeutischen Herstellung, das grösste, innovativste Verpackungszentrum der Roche und die Versorgung von mehr als 120 Ländern. Aufgrund der Steigerung der Produktion muss ab 2025 ein vollkontinuierlicher Schichtbetrieb eingeführt werden (= 3 Tage Frühschicht, 3 Tage Spätschicht, 3 Tage frei ) Der oder die perfekte Kandidat/in : ist eine positiv denkende, integre und selbstreflektierende Persönlichkeit mit starken Team- Fähigkeiten. In diesem Sinne bringt die Person eine offene und kollaborative Einstellung und Denkweise mit, die sie für die erfolgreiche Arbeit in einem Team und bereichsübergreifend benötigt. Der/die Kandidat:in übernimmt Verantwortung und lebt eine offene Speak-Up und Fehlerkultur. Ausserdem besitzt die Person eine abgeschlossene Ausbildung als Instandhaltungsmechaniker und 3 Jahre Berufserfahrung in der Instandhaltung. Aufgaben: * Verantwortung für die GMP-gerechte Wartung/Instandhaltung und Störungsbehebung an den Produktionsanlagen innerhalb des Wertstromes Solids DP, welcher für die Herstellung von Tabletten,Kapseln und Abfüllung von Pulver in Flaschen zuständig ist * Zuständigkeit für die mechanische Verfügbarkeit der Prozessanlagen, inkl. Produktionsbetreuung, Störungsbehebung, Wartung und Problemlösung an hochautomatisierten Anlagen (First Level Support) * Mithilfe bei der Erhöhung der Anlagenverfügbarkeit * Selbständige Durchführung von geplanten Instandhaltungstätigkeiten. Erstellen und optimieren der Wartungspläne * Mitarbeit bei der Erstellung und Optimierung von SOPs * Sicheres arbeiten im GMP-Umfeld und GMP-gerechte Dokumentation . Selbstständiges Erarbeiten und Ausführen kleinerer Anlagenoptimierungen unter Einhaltung des Technical Change Management" * Mitarbeit und Umsetzung von kontinuierlichen Verbesserungsmassnahmen (KVP) * Bereitschaft zum 2-Schichtbetrieb und Pikettdienst * Bereitschaft für das Arbeiten in einem selbst organisierten Team mit hohem Mass an * Eigenverantwortung in einem offenen und kollaborativen Umfeld * Gemeinsam mit dem Team LPS Methoden und Werkzeuge vorantreiben und im Tagesgeschäft leben * Einbringen von Ideen zur Verbesserung der Qualität, Effizienz der Anlagen, Kostenreduktion der Prozesse, und Mitarbeit und Umsetzung von kontinuierlichen Verbesserungsmassnahmen (KVP) Must Haves: * eine abgeschlossene Berufsausbildung als Instandhaltungsmechaniker/in oder vergleichbare Ausbildung * Berufserfahrung in der pharmazeutischen Produktion, Entwicklung, Qualitätssicherung und -kontrolle oder einer ähnlichen Industrie * Mind. 3 Jahre Berufserfahrung in der Instandhaltung idealerweise in der pharmazeutischen Produktion oder in einem stark regulierten Umfeld * Routinierter Umgang mit IT-Systemen (z.B. sichere Anwendung von Google- und Standard PC- Programmen) * Sehr gute Kommunikationsfähigkeiten in Wort und Schrift in Deutsch * Schnelle Auffassungsgabe und grosses Interesse an technischen Abläufen * Grosse Bereitschaft und Neugier, sich flexibel weiterzuentwickeln und im Sinne der Polyvalenz bereichsübergreifend zu lernen * Eine teamorientierte Denkweise mit Blick auf stete Verbesserung der Prozesse und die Fähigkeit in einem sich ständig veränderndem Umfeld konstante Leistung auf hohem Niveau zu erbringen * Kenntnisse und überzeugter Einsatz bezüglich Prozessverbesserungen (z.B. Lean Production System)sowie Agile Management sind von Vorteil * Fähigkeit und Offenheit, die Chancen und die Vorteile von Veränderungen zu erkennen und zu leben. In Diesem Sinne ist ein Interesse in den Bereichen Coaching und Change Management von Vorteil * Hohe Teamfähigkeit und Lösungsorientierung sowie kollaborative Arbeitsweise * Vorausschauendes Denken und Handeln und ausgeprägte Fähigkeiten im konzeptionellen Bereich * Exakte und zuverlässige Arbeitsweise auch unter zeitlicher Belastung * Sichere Anwendung von Standard PC-Programme Nice to haves: * Kenntnisse im SAP-PM-Modul * Englischkenntnisse Reference No.: 923390SDA Rolle : Mechaniker Industry : Pharma Location : Kaiseraugst Workload : 100% (kontinuierliches Schichtmodell: Pikettdienst 00.00 - 06.00 Uhr durchgehend (6 Tage im Monat) Start : 01.07.2024 (Spätestmögliches Startdatum: 01.09.2024) Duration : 18 Deadline : 07.05.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns: ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen keine zusätzlichen Gebühren.
23/04/2024
Project-based
Mechaniker (m/w/d) - pharmazeutischen Produktion/GMP/Google- und Standard PC- Programmen/Lean/Agile/Pikettdienst/Deutsch Projekt : Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir einen Mechaniker (m/w/d). Hintergrund : Bei Roche arbeiten 94'000 Menschen in über 100 Ländern an der Zukunft der Gesundheitsversorgung. Gemeinsam wurden wir eines der führenden, forschenden Pharmaunternehmen. Unser Erfolg basiert auf Innovation, Neugier und Diversität. Mit seinen 1400 Mitarbeitenden stellt das Produktionszentrum Kaiseraugst (PTGA) die ununterbrochene Patientenversorgung mit qualitativ hochwertigen Medikamenten sicher. PTGA steht für die höchsten Standards der pharmazeutischen Herstellung, das grösste, innovativste Verpackungszentrum der Roche und die Versorgung von mehr als 120 Ländern. Aufgrund der Steigerung der Produktion muss ab 2025 ein vollkontinuierlicher Schichtbetrieb eingeführt werden (= 3 Tage Frühschicht, 3 Tage Spätschicht, 3 Tage frei ) Der oder die perfekte Kandidat/in : ist eine positiv denkende, integre und selbstreflektierende Persönlichkeit mit starken Team- Fähigkeiten. In diesem Sinne bringt die Person eine offene und kollaborative Einstellung und Denkweise mit, die sie für die erfolgreiche Arbeit in einem Team und bereichsübergreifend benötigt. Der/die Kandidat:in übernimmt Verantwortung und lebt eine offene Speak-Up und Fehlerkultur. Ausserdem besitzt die Person eine abgeschlossene Ausbildung als Instandhaltungsmechaniker und 3 Jahre Berufserfahrung in der Instandhaltung. Aufgaben: * Verantwortung für die GMP-gerechte Wartung/Instandhaltung und Störungsbehebung an den Produktionsanlagen innerhalb des Wertstromes Solids DP, welcher für die Herstellung von Tabletten,Kapseln und Abfüllung von Pulver in Flaschen zuständig ist * Zuständigkeit für die mechanische Verfügbarkeit der Prozessanlagen, inkl. Produktionsbetreuung, Störungsbehebung, Wartung und Problemlösung an hochautomatisierten Anlagen (First Level Support) * Mithilfe bei der Erhöhung der Anlagenverfügbarkeit * Selbständige Durchführung von geplanten Instandhaltungstätigkeiten. Erstellen und optimieren der Wartungspläne * Mitarbeit bei der Erstellung und Optimierung von SOPs * Sicheres arbeiten im GMP-Umfeld und GMP-gerechte Dokumentation . Selbstständiges Erarbeiten und Ausführen kleinerer Anlagenoptimierungen unter Einhaltung des Technical Change Management" * Mitarbeit und Umsetzung von kontinuierlichen Verbesserungsmassnahmen (KVP) * Bereitschaft zum 2-Schichtbetrieb und Pikettdienst * Bereitschaft für das Arbeiten in einem selbst organisierten Team mit hohem Mass an * Eigenverantwortung in einem offenen und kollaborativen Umfeld * Gemeinsam mit dem Team LPS Methoden und Werkzeuge vorantreiben und im Tagesgeschäft leben * Einbringen von Ideen zur Verbesserung der Qualität, Effizienz der Anlagen, Kostenreduktion der Prozesse, und Mitarbeit und Umsetzung von kontinuierlichen Verbesserungsmassnahmen (KVP) Must Haves: * eine abgeschlossene Berufsausbildung als Instandhaltungsmechaniker/in oder vergleichbare Ausbildung * Berufserfahrung in der pharmazeutischen Produktion, Entwicklung, Qualitätssicherung und -kontrolle oder einer ähnlichen Industrie * Mind. 3 Jahre Berufserfahrung in der Instandhaltung idealerweise in der pharmazeutischen Produktion oder in einem stark regulierten Umfeld * Routinierter Umgang mit IT-Systemen (z.B. sichere Anwendung von Google- und Standard PC- Programmen) * Sehr gute Kommunikationsfähigkeiten in Wort und Schrift in Deutsch * Schnelle Auffassungsgabe und grosses Interesse an technischen Abläufen * Grosse Bereitschaft und Neugier, sich flexibel weiterzuentwickeln und im Sinne der Polyvalenz bereichsübergreifend zu lernen * Eine teamorientierte Denkweise mit Blick auf stete Verbesserung der Prozesse und die Fähigkeit in einem sich ständig veränderndem Umfeld konstante Leistung auf hohem Niveau zu erbringen * Kenntnisse und überzeugter Einsatz bezüglich Prozessverbesserungen (z.B. Lean Production System)sowie Agile Management sind von Vorteil * Fähigkeit und Offenheit, die Chancen und die Vorteile von Veränderungen zu erkennen und zu leben. In Diesem Sinne ist ein Interesse in den Bereichen Coaching und Change Management von Vorteil * Hohe Teamfähigkeit und Lösungsorientierung sowie kollaborative Arbeitsweise * Vorausschauendes Denken und Handeln und ausgeprägte Fähigkeiten im konzeptionellen Bereich * Exakte und zuverlässige Arbeitsweise auch unter zeitlicher Belastung * Sichere Anwendung von Standard PC-Programme Nice to haves: * Kenntnisse im SAP-PM-Modul * Englischkenntnisse Reference No.: 923390SDA Rolle : Mechaniker Industry : Pharma Location : Kaiseraugst Workload : 100% (kontinuierliches Schichtmodell: Pikettdienst 00.00 - 06.00 Uhr durchgehend (6 Tage im Monat) Start : 01.07.2024 (Spätestmögliches Startdatum: 01.09.2024) Duration : 18 Deadline : 07.05.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns: ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen keine zusätzlichen Gebühren.
Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract We require a Robotics Engineer/Site Manager to deal with Industrial Scale Automation Sortation HardWare This is a very Data Driven role - Starting in Zaragoza but then Spanning across various EU sites (Expenses Covered) The scope would be: - Provide on-site support to Identify, analyze, optimize and resolve advanced robotics system issues. - Optimization tasks such as: parameter changes, mechanical alignments, sensor adjustments and air pressure regulation. - Partner with product development, manufacturing, and site-level reliability, maintenance, and engineering (RME) teams to maximize the performance of advanced robotics system. Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract
23/04/2024
Project-based
Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract We require a Robotics Engineer/Site Manager to deal with Industrial Scale Automation Sortation HardWare This is a very Data Driven role - Starting in Zaragoza but then Spanning across various EU sites (Expenses Covered) The scope would be: - Provide on-site support to Identify, analyze, optimize and resolve advanced robotics system issues. - Optimization tasks such as: parameter changes, mechanical alignments, sensor adjustments and air pressure regulation. - Partner with product development, manufacturing, and site-level reliability, maintenance, and engineering (RME) teams to maximize the performance of advanced robotics system. Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract
iO associates have patterned with a leading multinational aerospace corporation that designs, manufactures, and sells aircraft, helicopters, satellites, and defense systems. With a rich history spanning decades, it is known for innovative technologies and commitment to sustainability in aviation. Its global presence and diverse product portfolio make it a key player in the aerospace industry, driving advancements in air travel and shaping its future. You will be responsible support the UK HR team in day-to-day activities, collaborating closely with HR Management, Business Partners, and Talent Acquisition Partners. Manage diaries, emails, travel, and expenses proactively for the Head of HR, ensuring seamless organization and efficiency. Job Title: HR Administrator/Executive Assistant Location: Monday to Friday days - core hours 37 per week Remote working available 3 days on site, 2 days remote Duration: 12 Months Responsibilities: Provide HR administrative, operational, and project support to HR Business Partners & UK HR Manage and prioritize the diary of the Head of HR, coordinating meetings, appointments, and travel. Support onboarding, induction, exit, and overseas deployment processes. Provide day-to-day time, attendance, and payroll support. Assist in Disciplinary & Grievance processes as required. Manage visitor process, room booking, and hospitality. Assist in creating and running HR events and processes. Perform ad hoc data management and analysis, such as file archiving, audits, surveys, and reports. Organize the Long Service Award process. Qualifications Highly organized with exceptional time management skills Excellent organizational and communication skills with strong attention to detail Proficient in Google Workspace or demonstrate adaptability to learn. Ability to remain calm under pressure and deal with sensitive/HR confidential topics. Proactive and adaptable, ready to tackle new challenges and support team needs. If this role aligns with your career aspirations, we invite you to take the next step and apply for this job. Please email or call.
23/04/2024
Project-based
iO associates have patterned with a leading multinational aerospace corporation that designs, manufactures, and sells aircraft, helicopters, satellites, and defense systems. With a rich history spanning decades, it is known for innovative technologies and commitment to sustainability in aviation. Its global presence and diverse product portfolio make it a key player in the aerospace industry, driving advancements in air travel and shaping its future. You will be responsible support the UK HR team in day-to-day activities, collaborating closely with HR Management, Business Partners, and Talent Acquisition Partners. Manage diaries, emails, travel, and expenses proactively for the Head of HR, ensuring seamless organization and efficiency. Job Title: HR Administrator/Executive Assistant Location: Monday to Friday days - core hours 37 per week Remote working available 3 days on site, 2 days remote Duration: 12 Months Responsibilities: Provide HR administrative, operational, and project support to HR Business Partners & UK HR Manage and prioritize the diary of the Head of HR, coordinating meetings, appointments, and travel. Support onboarding, induction, exit, and overseas deployment processes. Provide day-to-day time, attendance, and payroll support. Assist in Disciplinary & Grievance processes as required. Manage visitor process, room booking, and hospitality. Assist in creating and running HR events and processes. Perform ad hoc data management and analysis, such as file archiving, audits, surveys, and reports. Organize the Long Service Award process. Qualifications Highly organized with exceptional time management skills Excellent organizational and communication skills with strong attention to detail Proficient in Google Workspace or demonstrate adaptability to learn. Ability to remain calm under pressure and deal with sensitive/HR confidential topics. Proactive and adaptable, ready to tackle new challenges and support team needs. If this role aligns with your career aspirations, we invite you to take the next step and apply for this job. Please email or call.
Sheet Metal Worker/Welder Manchester About Our Client: Our Client is a long-established (40+ years) and growing family-run business specializing in sheet metal fabrication and welding. We offer a friendly, relaxed workplace environment focused on quality craftsmanship. Job Summary: We are seeking an experienced, skilled Sheet Metal Worker/Welder to join our team as a subcontractor. In this hands-on role, you will have the opportunity to work on a diverse range of projects and tackle new challenges daily across mild steel, stainless steel, and aluminium fabrication. Key Responsibilities: Read and interpret technical drawings, specifications, and manufacturing plans Perform MIG and TIG welding of thin plate mild steel and stainless steel components Operate CNC press brakes, Laser cutters, and other metalworking equipment Fabricate precise, high-quality metal parts, enclosures, frames, and assemblies Maintain clean and safe Workstation, adhering to health and safety protocols Requirements: Time-served background as a Sheet Metal Worker with proven welding experience Extensive MIG and TIG welding skills for mild steel and stainless steel (essential) Ability to read and work from technical drawings and manufacturing plans (critical) Experience operating CNC press brakes (preferred) Aluminium welding experience (preferred) Strong attention to detail and pride in delivering quality workmanship Reliable, punctual, and committed to meeting deadlines Working Hours: Monday-Thursday 7:30 AM - 4:15 PM, Friday 7:30 AM - 1:30 PM Compensation & Benefits: Competitive hourly rate of £16 - £18/hour Annual bonus based on company performance (approx. 2 weeks' pay) Occasional paid overtime at 1.5x rate (rare requirement) Join our skilled fabrication team at Our Client! If you are an experienced Sheet Metal Worker/Welder looking for an opportunity to showcase your talents, apply now.
23/04/2024
Project-based
Sheet Metal Worker/Welder Manchester About Our Client: Our Client is a long-established (40+ years) and growing family-run business specializing in sheet metal fabrication and welding. We offer a friendly, relaxed workplace environment focused on quality craftsmanship. Job Summary: We are seeking an experienced, skilled Sheet Metal Worker/Welder to join our team as a subcontractor. In this hands-on role, you will have the opportunity to work on a diverse range of projects and tackle new challenges daily across mild steel, stainless steel, and aluminium fabrication. Key Responsibilities: Read and interpret technical drawings, specifications, and manufacturing plans Perform MIG and TIG welding of thin plate mild steel and stainless steel components Operate CNC press brakes, Laser cutters, and other metalworking equipment Fabricate precise, high-quality metal parts, enclosures, frames, and assemblies Maintain clean and safe Workstation, adhering to health and safety protocols Requirements: Time-served background as a Sheet Metal Worker with proven welding experience Extensive MIG and TIG welding skills for mild steel and stainless steel (essential) Ability to read and work from technical drawings and manufacturing plans (critical) Experience operating CNC press brakes (preferred) Aluminium welding experience (preferred) Strong attention to detail and pride in delivering quality workmanship Reliable, punctual, and committed to meeting deadlines Working Hours: Monday-Thursday 7:30 AM - 4:15 PM, Friday 7:30 AM - 1:30 PM Compensation & Benefits: Competitive hourly rate of £16 - £18/hour Annual bonus based on company performance (approx. 2 weeks' pay) Occasional paid overtime at 1.5x rate (rare requirement) Join our skilled fabrication team at Our Client! If you are an experienced Sheet Metal Worker/Welder looking for an opportunity to showcase your talents, apply now.
FU Engineer vacancy requiring profound CQV knowledge for a globally operating Neuchatel based company in the pharmaceutical sector . Your tasks: Supporting current Engineering activities on the project, particularly in sink sanitization and heating loop system Performing technical documentation revision, SAT protocol writing, and coordination of supplier interventions Providing technical oversight and support for project activities Offering process support for engineering, qualification, and validation of new equipment Providing ongoing technical support for change control, deviation investigations, and CAPA management Your experience/knowledge: Experience in executing static and dynamic Site Acceptance Testing SAT, Performance Qualification PQ, and ensuring compliance with cGMP and company standards Hands-on experience in commissioning, qualification, and validation activities Proficiency in revising technical documentation such as Piping and Instrumentation Diagrams P&ID, technical specifications, and spare parts lists Ability to write SAT static, automation, dynamic protocols Strong coordination skills for managing suppliers' interventions according to site requirements Location: Neuchatel, Switzerland Sector: Pharmaceutical Start: ASAP Duration: 03MM+ Ref .Nr.: BH21576 Take the next step and send us your resume along with a daytime phone number where we can reach you. Due to Swiss work permit restrictions, we can only consider applications from Swiss nationals, EU citizens as well as current work-permit holders for Switzerland. Ukrainian refugees are warmly welcomed, we will support you all the way. We welcome applications from individuals of all genders, age groups, sexual orientations, personal expressions, ethnic backgrounds, and religious beliefs. Therefore, there is no requirement to provide gender information or a photo in your application. As per client requirements, we need information about your marital status, nationality, date of birth, and a valid Swiss work permit. For applicants with disabilities, we are happy to explore potential solutions with our end client.
23/04/2024
Project-based
FU Engineer vacancy requiring profound CQV knowledge for a globally operating Neuchatel based company in the pharmaceutical sector . Your tasks: Supporting current Engineering activities on the project, particularly in sink sanitization and heating loop system Performing technical documentation revision, SAT protocol writing, and coordination of supplier interventions Providing technical oversight and support for project activities Offering process support for engineering, qualification, and validation of new equipment Providing ongoing technical support for change control, deviation investigations, and CAPA management Your experience/knowledge: Experience in executing static and dynamic Site Acceptance Testing SAT, Performance Qualification PQ, and ensuring compliance with cGMP and company standards Hands-on experience in commissioning, qualification, and validation activities Proficiency in revising technical documentation such as Piping and Instrumentation Diagrams P&ID, technical specifications, and spare parts lists Ability to write SAT static, automation, dynamic protocols Strong coordination skills for managing suppliers' interventions according to site requirements Location: Neuchatel, Switzerland Sector: Pharmaceutical Start: ASAP Duration: 03MM+ Ref .Nr.: BH21576 Take the next step and send us your resume along with a daytime phone number where we can reach you. Due to Swiss work permit restrictions, we can only consider applications from Swiss nationals, EU citizens as well as current work-permit holders for Switzerland. Ukrainian refugees are warmly welcomed, we will support you all the way. We welcome applications from individuals of all genders, age groups, sexual orientations, personal expressions, ethnic backgrounds, and religious beliefs. Therefore, there is no requirement to provide gender information or a photo in your application. As per client requirements, we need information about your marital status, nationality, date of birth, and a valid Swiss work permit. For applicants with disabilities, we are happy to explore potential solutions with our end client.
Electrical Engineer Stone, Staffordshire Up to £65,000 VIQU have partnered with a leading entity in operational technology and digital transformation. They boast a longstanding reputation for advanced system integration, with expertise in optimising efficiency and achieving impressive performance on a large scale. Their commitment to continuous innovation drives their forward-thinking approach. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. They are seeking skilled Electrical Engineers to join their Energy team, specialising in Electrical, Control & Instrumentation (E, C & I) design and implementation. The role entails designing electrical and control systems, particularly focusing on PLC based systems for thermal and hydro power generation. As the Electrical Engineer, your responsibilities include conducting site surveys, creating system designs, producing documentation, and providing support during site acceptance testing. The successful Electrical Engineer will possess expertise in control systems, field cabling systems, and control panel design, along with relevant education and proficiency in software such as Word, Autocad, and Excel. It is also desirable for the Electrical Engineer to have familiarity with specific control system platforms, site installation experience, knowledge of wiring regulations, and awareness of safety regulations. Essential Skills of the Electrical Engineer: - Experience in control systems within the energy market - Competency in field cabling systems including surveying and route identification - Competency in control panel design incorporating PLC, I/O, Comms cards, UPS's etc - Relevant education to at least degree level or HND with additional experience - Computer literacy with Word, Autocad, and Excel - Methodical approach to project interpretation and delivery - Understanding of Full Project Lifecycle - Hold a current full driving licence (UK or be able to easily convert to full UK) - Willingness to undergo a basic disclosure Scotland check. To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Electrical Engineer Stone, Staffordshire Up to £65,000
23/04/2024
Full time
Electrical Engineer Stone, Staffordshire Up to £65,000 VIQU have partnered with a leading entity in operational technology and digital transformation. They boast a longstanding reputation for advanced system integration, with expertise in optimising efficiency and achieving impressive performance on a large scale. Their commitment to continuous innovation drives their forward-thinking approach. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. They are seeking skilled Electrical Engineers to join their Energy team, specialising in Electrical, Control & Instrumentation (E, C & I) design and implementation. The role entails designing electrical and control systems, particularly focusing on PLC based systems for thermal and hydro power generation. As the Electrical Engineer, your responsibilities include conducting site surveys, creating system designs, producing documentation, and providing support during site acceptance testing. The successful Electrical Engineer will possess expertise in control systems, field cabling systems, and control panel design, along with relevant education and proficiency in software such as Word, Autocad, and Excel. It is also desirable for the Electrical Engineer to have familiarity with specific control system platforms, site installation experience, knowledge of wiring regulations, and awareness of safety regulations. Essential Skills of the Electrical Engineer: - Experience in control systems within the energy market - Competency in field cabling systems including surveying and route identification - Competency in control panel design incorporating PLC, I/O, Comms cards, UPS's etc - Relevant education to at least degree level or HND with additional experience - Computer literacy with Word, Autocad, and Excel - Methodical approach to project interpretation and delivery - Understanding of Full Project Lifecycle - Hold a current full driving licence (UK or be able to easily convert to full UK) - Willingness to undergo a basic disclosure Scotland check. To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Electrical Engineer Stone, Staffordshire Up to £65,000
Role: This position's prime responsibilities are for the development of new (to blank deposition technologies, new materials systems and new deposition products, the latter including coating challenges that blank may undertake for customers. The position improves the efficiency and throughput of the existing equipment and processes. The position is also responsible for any external Coating research collaborations that blank undertakes. Monitor global developments in thin film technology that might impact blank and to provide technical assessments of developing areas of application that might provide new business opportunities. Deliver business transformation through disruptive technology innovation. Review customer and market feedback to maximize impact of development and innovation efforts. Develop technology and innovation roadmaps that are aligned with our customers existing and emerging needs. Ensure the site has access to all sources of manufacturing and process best practice so that we gain and sustain a competitive advantage over our competitors. Assists the business development, sales, and marketing functions to maximise the competitiveness and responsiveness of our products and processes. Enable manufacturable results from development and innovation efforts. Leverage risks and opportunities- pursue and adopt new technologies and drive implementation across product lines Participate in proposal development and champion estimates and technical statements of work whilst serving as a technical spokesperson for blank Infrared. Serve as a key interface with customers and takes their needs and requirements as inputs to create high-value solutions. Implementation of optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards; recommends and implements improvements to production processes, methods, and controls; coordinates manufacturing launch for new or revised products An Engineering Degree in a STEM subject Preferred: Physics or Chemistry Proven Knowledge of Thin Film Coating Deposition Design and Control 5+ years of experience in high technology manufacturing or research labs Competent in Project Management Essential: Microsoft Office, Coating Design Software Possess strong problem-solving skills with an attention to detail Highly analytical mindset Capability to travel internationally to support customer visits SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all
23/04/2024
Full time
Role: This position's prime responsibilities are for the development of new (to blank deposition technologies, new materials systems and new deposition products, the latter including coating challenges that blank may undertake for customers. The position improves the efficiency and throughput of the existing equipment and processes. The position is also responsible for any external Coating research collaborations that blank undertakes. Monitor global developments in thin film technology that might impact blank and to provide technical assessments of developing areas of application that might provide new business opportunities. Deliver business transformation through disruptive technology innovation. Review customer and market feedback to maximize impact of development and innovation efforts. Develop technology and innovation roadmaps that are aligned with our customers existing and emerging needs. Ensure the site has access to all sources of manufacturing and process best practice so that we gain and sustain a competitive advantage over our competitors. Assists the business development, sales, and marketing functions to maximise the competitiveness and responsiveness of our products and processes. Enable manufacturable results from development and innovation efforts. Leverage risks and opportunities- pursue and adopt new technologies and drive implementation across product lines Participate in proposal development and champion estimates and technical statements of work whilst serving as a technical spokesperson for blank Infrared. Serve as a key interface with customers and takes their needs and requirements as inputs to create high-value solutions. Implementation of optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards; recommends and implements improvements to production processes, methods, and controls; coordinates manufacturing launch for new or revised products An Engineering Degree in a STEM subject Preferred: Physics or Chemistry Proven Knowledge of Thin Film Coating Deposition Design and Control 5+ years of experience in high technology manufacturing or research labs Competent in Project Management Essential: Microsoft Office, Coating Design Software Possess strong problem-solving skills with an attention to detail Highly analytical mindset Capability to travel internationally to support customer visits SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all
My client is looking for EC&I Engineer that had knowledge of all elements of EC&I. You'll be working for a leading Process/Chemical company based in Huddersfield. The client are an International Design House that provides engineering design, project management and construction management services for various industrial sectors but mainly focus in the Chemical/Process industries. Skills: Fully operational in specification and selection of all common types of industrial instruments (pressure, temperature, flow, level, weight, pH, conductivity) and valves Awareness of special analytical instruments Fully operational in hardware specification and selection of PLC/Scada/DCS systems Fully operational in producing URS and checking FDS and FAT Plans and FAT execution. Working knowledge of software standards such as batch management. Fully operational in all commonly used Microsoft software (Word, Excel etc) and AutoCAD 2D. AutoCAD Electrical. Fully operational in working in line with an ISO 9000 QA system using standard formats as necessary. Fully operational in Lead EC&I Engineer role in multi-disciplinary team and interfacing with clients. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
23/04/2024
Project-based
My client is looking for EC&I Engineer that had knowledge of all elements of EC&I. You'll be working for a leading Process/Chemical company based in Huddersfield. The client are an International Design House that provides engineering design, project management and construction management services for various industrial sectors but mainly focus in the Chemical/Process industries. Skills: Fully operational in specification and selection of all common types of industrial instruments (pressure, temperature, flow, level, weight, pH, conductivity) and valves Awareness of special analytical instruments Fully operational in hardware specification and selection of PLC/Scada/DCS systems Fully operational in producing URS and checking FDS and FAT Plans and FAT execution. Working knowledge of software standards such as batch management. Fully operational in all commonly used Microsoft software (Word, Excel etc) and AutoCAD 2D. AutoCAD Electrical. Fully operational in working in line with an ISO 9000 QA system using standard formats as necessary. Fully operational in Lead EC&I Engineer role in multi-disciplinary team and interfacing with clients. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
23/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
Calling all BMS Engineer roles, based in London! (Looking for both a Service and/or Commissioning engineer) BMS Engineer Responsibilities: Testing and Commissioning: Conducting system tests, troubleshooting issues, and commissioning BMS systems to ensure proper functionality and performance. Maintenance and Upgrades: Performing regular maintenance, upgrades, and modifications to existing systems to improve efficiency and address issues. Documentation: Creating and maintaining documentation such as system diagrams, user manuals, and technical specifications. Collaboration: Working closely with other engineers, technicians, and stakeholders to ensure seamless integration of BMS with other building systems. Skills and Qualifications: Experience with building automation systems, BMS software, and control system design. Strong problem-solving skills and the ability to troubleshoot complex systems. Familiarity with HVAC, lighting, security, and other building systems. Attention to detail and ability to work independently and in a team. Certifications: Manufacturer-specific certifications for BMS systems (eg, Trend, Tridium, Siemens, Johnson Controls, Schneider). PACKAGE: £45,000 - £55,000 Company car/Allowance Pension Contribution
23/04/2024
Full time
Calling all BMS Engineer roles, based in London! (Looking for both a Service and/or Commissioning engineer) BMS Engineer Responsibilities: Testing and Commissioning: Conducting system tests, troubleshooting issues, and commissioning BMS systems to ensure proper functionality and performance. Maintenance and Upgrades: Performing regular maintenance, upgrades, and modifications to existing systems to improve efficiency and address issues. Documentation: Creating and maintaining documentation such as system diagrams, user manuals, and technical specifications. Collaboration: Working closely with other engineers, technicians, and stakeholders to ensure seamless integration of BMS with other building systems. Skills and Qualifications: Experience with building automation systems, BMS software, and control system design. Strong problem-solving skills and the ability to troubleshoot complex systems. Familiarity with HVAC, lighting, security, and other building systems. Attention to detail and ability to work independently and in a team. Certifications: Manufacturer-specific certifications for BMS systems (eg, Trend, Tridium, Siemens, Johnson Controls, Schneider). PACKAGE: £45,000 - £55,000 Company car/Allowance Pension Contribution
Mechanical Technician - up to £28 per hour Inside IR35 - 12 Months (extensions highly likely) Herefordshire - standard 37 hours - Fully Onsite Working (Free Parking).Apprenticeship and NVQ needed* One stage F2F interview with skills test - Sector: Aerospace and Defence Are you a skilled production professional seeking a challenging opportunity with a leading company in the manufacturing sector? We are currently looking for dedicated individuals to join the Operations team of Our client who is a renowned Aerospace company at the forefront of space exploration and travel. Daily tasks will include assembly and final assembly processes of aluminium composite panel manufacture. Responsibilities: * Able to insert panels with the correct type of mechanical fasteners. * Potting of inserts * Bonding of various brackets and equipment * Bonding of inserts, using various adhesives * Bonding components and sub-assemblies using adhesives to drawing specifications * Produce work to drawing specification * Ability to read and understand Detailed engineering drawings and procedures. * Awareness and adherence to all the company Health & Safety procedures * High tolerance requirements (typically better than 0.05mm in various areas). Essential: Previous experience in a Manual Handling Role Previous experience within a production/manufacturing environment with regular use of hand tools Ability to follow procedures and work instructions/manuals. Relevant experience in carbon fibre A relevant Apprenticeship or NVQ Desirable: Clean room environment experience Previous experience of laminating Aluminium Ability to read and interpret engineering drawings preferred
23/04/2024
Project-based
Mechanical Technician - up to £28 per hour Inside IR35 - 12 Months (extensions highly likely) Herefordshire - standard 37 hours - Fully Onsite Working (Free Parking).Apprenticeship and NVQ needed* One stage F2F interview with skills test - Sector: Aerospace and Defence Are you a skilled production professional seeking a challenging opportunity with a leading company in the manufacturing sector? We are currently looking for dedicated individuals to join the Operations team of Our client who is a renowned Aerospace company at the forefront of space exploration and travel. Daily tasks will include assembly and final assembly processes of aluminium composite panel manufacture. Responsibilities: * Able to insert panels with the correct type of mechanical fasteners. * Potting of inserts * Bonding of various brackets and equipment * Bonding of inserts, using various adhesives * Bonding components and sub-assemblies using adhesives to drawing specifications * Produce work to drawing specification * Ability to read and understand Detailed engineering drawings and procedures. * Awareness and adherence to all the company Health & Safety procedures * High tolerance requirements (typically better than 0.05mm in various areas). Essential: Previous experience in a Manual Handling Role Previous experience within a production/manufacturing environment with regular use of hand tools Ability to follow procedures and work instructions/manuals. Relevant experience in carbon fibre A relevant Apprenticeship or NVQ Desirable: Clean room environment experience Previous experience of laminating Aluminium Ability to read and interpret engineering drawings preferred
Title: Technical Records Administrator Duration: 8 Months Location: Brize Norton, HYBRID 60% on-site Pay rate: Up to £25 per hour An innovative company at the forefront of the aerospace industry, located in Brize Norton is actively seeking a Technical Records Administrator to join its engineering team. The company is globally recognized for its innovation and contributions to the aviation industry. You will coordinate with the Technical Records Coordinator to prioritize tasks and ensure compliance with Regulatory Articles and Atlas processes: managing paperwork distribution, audits, documentation checks, and data compilation for efficient workflow and regulatory adherence. The Technical Records Administrator is responsible for: Coordinating with the Technical Records Coordinator on their daily priorities. Adhering to all relevant Regulatory Articles (RAs) and Atlas procedures. Gathering, organizing, and distributing paperwork to relevant personnel in the Technical Support and CAW Management departments for review. Conducting daily and monthly audits of all MDS transactions performed by Pt 145, initiating WORs for corrections and reporting errors. Performing a thorough check of the Technical Logbook to ensure completeness and accuracy of documentation. Verifying the presence and accuracy of all blank documents in Documents Packs prepared for offsite activities. Digitally scanning, filing, and archiving documentation in accordance with Atlas procedures. Compiling requested data for the Military Airworthiness Review (MAR) team to support the annual audit. Posting approved Engineering Documentation on the F Drive for accessibility by relevant departments. If you envision playing a key role in enhancing communities through innovative Engineering Administrative solutions, then this opportunity aligns perfectly with your aspirations. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
23/04/2024
Project-based
Title: Technical Records Administrator Duration: 8 Months Location: Brize Norton, HYBRID 60% on-site Pay rate: Up to £25 per hour An innovative company at the forefront of the aerospace industry, located in Brize Norton is actively seeking a Technical Records Administrator to join its engineering team. The company is globally recognized for its innovation and contributions to the aviation industry. You will coordinate with the Technical Records Coordinator to prioritize tasks and ensure compliance with Regulatory Articles and Atlas processes: managing paperwork distribution, audits, documentation checks, and data compilation for efficient workflow and regulatory adherence. The Technical Records Administrator is responsible for: Coordinating with the Technical Records Coordinator on their daily priorities. Adhering to all relevant Regulatory Articles (RAs) and Atlas procedures. Gathering, organizing, and distributing paperwork to relevant personnel in the Technical Support and CAW Management departments for review. Conducting daily and monthly audits of all MDS transactions performed by Pt 145, initiating WORs for corrections and reporting errors. Performing a thorough check of the Technical Logbook to ensure completeness and accuracy of documentation. Verifying the presence and accuracy of all blank documents in Documents Packs prepared for offsite activities. Digitally scanning, filing, and archiving documentation in accordance with Atlas procedures. Compiling requested data for the Military Airworthiness Review (MAR) team to support the annual audit. Posting approved Engineering Documentation on the F Drive for accessibility by relevant departments. If you envision playing a key role in enhancing communities through innovative Engineering Administrative solutions, then this opportunity aligns perfectly with your aspirations. *PS: The Company can't provide any sponsorship, so only candidates with the existing right to work in the UK will be considered for this role.
Vehicle Body Repair Technician Bracknell Reports to: Department Manager, Service Manager, Assistant Service Manager Job Purpose: Repair and maintain commercial fleet vehicles to manufacturer specifications and VOSA regulations. Work as part of a team in the vehicle workshop assisting with repairs and maintenance. Key Responsibilities: Perform repairs on commercial vans, trucks and trailers Ensure vehicles are maintained to a safe and legal standard Carry out quality repairs in a cost effective manner Maintain clean, tidy and safe workshop Keep up to date with industry changes Complete all documentation accurately Requirements: Qualification in Vehicle Body Repair Full UK driving license Experience repairing commercial vehicles Knowledge of commercial vehicle legislation Good communication and teamwork skills Benefits: Unique employee-ownership business model Opportunities for development and training Commercial vehicle maintenance experience The role suits someone with experience in commercial vehicle repairs, knowledge of vehicle
23/04/2024
Full time
Vehicle Body Repair Technician Bracknell Reports to: Department Manager, Service Manager, Assistant Service Manager Job Purpose: Repair and maintain commercial fleet vehicles to manufacturer specifications and VOSA regulations. Work as part of a team in the vehicle workshop assisting with repairs and maintenance. Key Responsibilities: Perform repairs on commercial vans, trucks and trailers Ensure vehicles are maintained to a safe and legal standard Carry out quality repairs in a cost effective manner Maintain clean, tidy and safe workshop Keep up to date with industry changes Complete all documentation accurately Requirements: Qualification in Vehicle Body Repair Full UK driving license Experience repairing commercial vehicles Knowledge of commercial vehicle legislation Good communication and teamwork skills Benefits: Unique employee-ownership business model Opportunities for development and training Commercial vehicle maintenance experience The role suits someone with experience in commercial vehicle repairs, knowledge of vehicle
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
23/04/2024
Full time
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
23/04/2024
Full time
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
Overview Reporting to the Quality Manager, the Quality Engineer - Systems will be responsible for supporting the administration and co-ordination of all quality processes within the team in order to ensure compliance with the relevant standards. Responsibilities Plan and conduct internal audits in alignment with the appropriate standards, document findings and ensure improvement / corrective actions are implemented and effective. Support the Quality Manager with the administration of IR's, in addition to IR report generation and external auditors as required. Conduct supplier audits, document findings and ensure improvement / corrective actions are implemented and effective. Work with the Purchasing team and suppliers in order to support component issue resolution. Support with the administration and maintenance of the Quality Management System (QMS). Gather data and generate reports to support decision making within the team and wider business. Support the Quality Manager to ensure the ongoing compliance with the relevant quality, industry and regulatory standards. Identify the need for and support the implementation of continuous improvement initiatives across the business. Other duties as required. Essential Experience: Problem solving: Knowledge and experience of root cause analysis and corrective action, logical approach to resolution of issues. Data: Proven experience of collating, analysing, and presenting data. Engineering: Prior experience of working in a similar role within an engineering environment. Quality: Working in an ISO9001 or similar environment. IT Skills: Knowledge and experience of using Microsoft packages including Word, Excel, and Outlook. Desirable skills but not essential: Electronics Knowledge: Experience of working in a practical electronics environment. Auditing: Experience in conducting audits against ISO9001, processing audit documentation and improvement reports. Experience in administration and maintenance of the Quality Management System (QMS) Compliance: Acts with integrity and can work in accordance with regulation and compliance. Data Visualisation Software: Familiar with data visualisation software, such as Power BI or similar tools for date gathering and presentation. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job
23/04/2024
Full time
Overview Reporting to the Quality Manager, the Quality Engineer - Systems will be responsible for supporting the administration and co-ordination of all quality processes within the team in order to ensure compliance with the relevant standards. Responsibilities Plan and conduct internal audits in alignment with the appropriate standards, document findings and ensure improvement / corrective actions are implemented and effective. Support the Quality Manager with the administration of IR's, in addition to IR report generation and external auditors as required. Conduct supplier audits, document findings and ensure improvement / corrective actions are implemented and effective. Work with the Purchasing team and suppliers in order to support component issue resolution. Support with the administration and maintenance of the Quality Management System (QMS). Gather data and generate reports to support decision making within the team and wider business. Support the Quality Manager to ensure the ongoing compliance with the relevant quality, industry and regulatory standards. Identify the need for and support the implementation of continuous improvement initiatives across the business. Other duties as required. Essential Experience: Problem solving: Knowledge and experience of root cause analysis and corrective action, logical approach to resolution of issues. Data: Proven experience of collating, analysing, and presenting data. Engineering: Prior experience of working in a similar role within an engineering environment. Quality: Working in an ISO9001 or similar environment. IT Skills: Knowledge and experience of using Microsoft packages including Word, Excel, and Outlook. Desirable skills but not essential: Electronics Knowledge: Experience of working in a practical electronics environment. Auditing: Experience in conducting audits against ISO9001, processing audit documentation and improvement reports. Experience in administration and maintenance of the Quality Management System (QMS) Compliance: Acts with integrity and can work in accordance with regulation and compliance. Data Visualisation Software: Familiar with data visualisation software, such as Power BI or similar tools for date gathering and presentation. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
23/04/2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
MP Recruitment Group
Sutton Courtenay, Oxfordshire
Main Purpose of Role: To be main point of contact to UK customers providing customer service, technical advice, and sales requirements to each customer s individual needs. To provide technical and commercial back-up to support external sales team Key Duties/Main Responsibilities: To help develop and grow sales to existing and new customers through offering technically sound and cost-effective drive solutions matching their needs. Dealing with telephone enquiries from customers. Based on information supplied by customer, select appropriate product. Prepare quotations and reports for customers as required. Use Business systems and procedures to maintain customer interaction history using CRM system. Support external sales team with technical and commercial support. Essential Skills A good telephone manner Capable of working in a close dynamic team Educated to ONC/HNC/Apprenticeship or equivalent experience in Mechanical or Electrical/Electronic Engineering Computer literate with Microsoft products, Outlook, Dynamics CRM, Excel, Word, PowerPoint Working use of SAP would be beneficial but not essential Technical sales experience would be beneficial. Full driving license and living 45 minutes commuting from Abingdon Training A training program will be put in place to cover both sales and product training; the program will be based on individual requirements. Performance Measures on Value of sales orders raised and On-time delivery to customers Use of CRM Software and internal business systems and procedures Benefits Bonus up to £3k per annum Holiday: starting on 22 days, rising by 1 day per completed year of service to a max of 25 days plus BH Hours : 8.30am 5pm Monday Thursday and Friday 8.30am 4pm (39 hour working week) 1 day per week WFH (only after passing 3 months probation) Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
23/04/2024
Full time
Main Purpose of Role: To be main point of contact to UK customers providing customer service, technical advice, and sales requirements to each customer s individual needs. To provide technical and commercial back-up to support external sales team Key Duties/Main Responsibilities: To help develop and grow sales to existing and new customers through offering technically sound and cost-effective drive solutions matching their needs. Dealing with telephone enquiries from customers. Based on information supplied by customer, select appropriate product. Prepare quotations and reports for customers as required. Use Business systems and procedures to maintain customer interaction history using CRM system. Support external sales team with technical and commercial support. Essential Skills A good telephone manner Capable of working in a close dynamic team Educated to ONC/HNC/Apprenticeship or equivalent experience in Mechanical or Electrical/Electronic Engineering Computer literate with Microsoft products, Outlook, Dynamics CRM, Excel, Word, PowerPoint Working use of SAP would be beneficial but not essential Technical sales experience would be beneficial. Full driving license and living 45 minutes commuting from Abingdon Training A training program will be put in place to cover both sales and product training; the program will be based on individual requirements. Performance Measures on Value of sales orders raised and On-time delivery to customers Use of CRM Software and internal business systems and procedures Benefits Bonus up to £3k per annum Holiday: starting on 22 days, rising by 1 day per completed year of service to a max of 25 days plus BH Hours : 8.30am 5pm Monday Thursday and Friday 8.30am 4pm (39 hour working week) 1 day per week WFH (only after passing 3 months probation) Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.