47 joburi disponibile

Oversee operation and management of routine and emergency services on a variety of critical systems such as; switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building and power monitoring systems Work with IT managers and other business leaders to coordinate projects, manage capacity and optimise plant safety, performance, reliability and efficiency Deliver quality service and ensure all customer demands are met Respond to out-of-hours emergency calls as second level escalation point for Data Centre facility related issues and/or failures. Establish performance benchmarks, conduct analysis and prepare reports on all aspects of the critical facility operations and maintenance. Review MCM, SOP's & EOP's to support the COLO planned maintenance. Work closely with Field Engineering to support and validated accurate power audits to support future rack deployments. Attend daily meetings with the COLO and evaluate planned work to support business. Additional Info Degree of Ambiguity Problem, opportunity, and business strategy are defined. Starting to see around corners and able to design solutions to meet assigned goals/needs. Works independently, but will seek direction. Uses technical judgment on technical issues for the site/campus and possibly, the region. Scope of Influence Influences across multiple partner and external teams in a cluster; may influence in a region. Starts to influence senior leaders. Work crosses multiple site locations in a single region; impacts workflow processes for a cluster and may impact for the region. Some roles work across teams to meet a goal. Provides training to Chief Engineers. Mentors and develops others. Execution Work is primarily tactical; learning to be strategic. Coordinates increasingly complex work activities within defined process paths. Mitigates immediate risk and develops risk assessments. Decides if they can handle or need to escalate. Helps define best practices. Optimizes procedures, process, and actively shares best practices. Tech Complexity Technical challenges are difficult7. Supervises highly complex troubleshooting and troubleshoots high complexity technical problems. Uses increased technical expertise to support business strategy. Supervises and provides technical guidance on preventive/corrective maintenance tasks to meet campus and cluster metrics. Acts as the SME for campus infrastructure. Evaluates and identifies equipment deficiencies. Creates workflows, emergency procedures, and processes to improve efficiency. Process Improvement Optimizes improvements for operational excellence. Creates process improvement plans and provides process improvement feedback to site leadership. Suggested Experience 4+ years of electrical, mechanical, HVAC, and fire system experience in a critical infrastructure.

We are currently looking on behalf of one of our important clients for a C/C++ Embedded Software Developer (Medical Device Sector). The role is a permanent position based in Bern Canton with good home office allowance. Your Role: Be an active member of a team that focuses on modern software for connected mobile medical devices. Participate in the definition of concepts & SW architecture. Create, extend & maintain Embedded software units & components in MISRA C in accordance with IEC 62304. Create, extend & maintain test cases in C++ using a testing framework in C++. Peer review other team members work packages. Create software documentation artefacts, eg describing functionality & business logic. Participate in the creation & reviews of formal specification artifacts. Support & collaborate with peers, eg in the fields of hardware, testing, production & requirements engineering. Support improvements to development, build & simulation approaches. Your Skills: At least 3 years of professional experience in Embedded Software Development. Skilled in most of the following: C, C++, MISRA C, Git, UML, Unit Testing Frameworks, Build Systems/Pipelines, Python & Doors NG. Experienced in Agile Development Environments (SCRUM/SAFe). Any experience in the areas of Software Architecture, Software Design Patterns & Functional Safety is considered a plus. Ideally experienced in the Medical Device Sector & IEC 62304 or other Highly Regulated Environments. Your Profile: Completed University Degree in Computer Science or Electrical Engineering or similar. Open, communicative & a team player. Responsible, quality-oriented, pragmatic & a can-do attitude. Fluent in English (spoken & written), German language skills are considered a plus. If you wish to apply, please send us your resume in Word or PDF format.

The Opportunity: My client working within the renewable energy sector are looking for a Scientific Process Design Engineer on a permanent basis. Within this role you will lead activities within their engineering discipline and provide guidance and technical authority on design and safety considerations. You will work within the technical team to lead the execution of complex tasks and projects within their discipline. You will also have the responsibility for the design of major projects and products as allocated by the planning group. As a Scientific Process Design engineer you are required to lead activities around integration of my client's product family into the existing market, as well as optimization of the products for the capture and treatment of fugitive methane from slurry lagoons. Skills and Experience: Liaise and co-ordinate with AD site operators on projects for deployment and integration of Gas Processing products. Manage and/or execute testing of various biological feedstocks to determine methane potential and gas yields. Provide expert guidance on testing and diagnosis of operational sites to improve and maintain gas capture rates and quality. Follows procedures to ensure compliance with company ISO standards Lead the design of complex systems and products within discipline, with guidance from the Principal Engineer. Lead teams in the safe and effective execution of tasks, or co-ordinate multiple teams with the aid of Junior Engineers and Foremen. Experience of Anaerobic Digester or biological processing facilities. Able to demonstrate understanding of the key factors affecting methane production from anaerobic digestion. Engineering or Scientific degree or Diploma Laboratory training and experience in running, or design of, biological experiments. Experience in sizing and design of pipework for process fluid systems.

The Principal Engineer - Systems (MBSE) will be able to apply their subject matter expertise and domain experience to support submarine programmes through the formalised application of modelling to support system requirements management, verification and validation activities. They will provide subject matter expertise and advice to other functional and capability areas to support overall project delivery and performance. The Principal Engineer - Systems (MBSE) will be able to understand and report the programme status for engineering activities, identify problem areas and implement recovery plans. This will include the management of any consequent change embodiment activities. The Principal Engineer - Systems (MBSE) will have a working knowledge of major developments and changes in Model Based Systems Engineering (MBSE) across industry and academia and be aware of the direction of potential future technologies relevant to their team. CORE DUTIES Provide specialist knowledge and subject matter expertise in MBSE. Identify the need for, develop, communicate, and maintain models supporting the entire engineering life cycle. Understand and articulate the impact of their models on other areas of the submarine platform. Ensure design proving evidence is comprehensive, captured within the requirements management tools and has been endorsed by the appropriate level of authority. Support the documentation of domain knowledge and be able to pass on information and expertise in order to help grow the knowledge base within appropriate business teams. Provide technical guidance to other engineers and support the engineering management team in planning and controlling MBSE activities. KEY ACCOUNTABILITIES AND DELIVERABLES The Principal Engineer - Systems (MBSE) will be responsible for, or provide input, in the form of models and supporting evidence to the following typical key deliverables, dependent on the role and the place the project is in the engineering life cycle: Capture and agreed technical requirements in accordance with company and programme processes. Deliver design documentation generated, captured, configured and controlled in accordance with company processes. Deliver design change requirements and documentation generated, captured, configured and controlled in accordance with company processes. Provide engineering LCM adherence for all deliverables and relevant input to project LCM activities. Leverage MBSE experience and knowledge in both the tactical and strategic development of other engineers and relevant members of other supporting functions. SUBJECT KNOWLEDGE and QUALIFICATIONS Significant knowledge and expertise of Model Based Systems Engineering toolsets process and practices in the defence, maritime or closely linked industry and the correct recognition of the context of their work within the overall product. Knowledge of the engineering life cycle with experience of operating in the phase relevant to the role and awareness of the entire engineering life cycle. Knowledge of Systems Engineering ways of working and life cycles. A strong working understanding of Product Safety and SHE. OTHER REQUIREMENTS Experience of the IBM DOORS toolset.

Graduate Systems Engineer Defence; Aerospace; Marine; MOD; Naval; Maritime Rochester, Kent (Hybrid available) £34,000 - £40,000 + excellent Benefits. *We can only consider sole UK Nationals for this position, due to Security Clearance required* A global aerospace and defence organisation specialising in state-of-the-art defence solutions are seeking Graduate Systems Engineers. You'll be part of the development and supply of products across a diverse mix of commercial and military platforms; Head Up and Head Worn Displays, Safety Critical Pilot Control and Flight Control Systems. We encourage our Systems Engineers to gain a breadth of knowledge across these domains to become subject matter experts in one or more product domain, or systems engineering specialism. What you'll be doing: Co-operative engagement in teams to understand our customers' needs, specify, design and develop unique systems using best practice, such as Model Based Systems Engineering Integration, analysis and test of Real Time systems with leading edge technology and multiple technical disciplines such as electronic, mechanical, optical and software Taking responsibility for your work, understanding deadlines, accurately reporting progress, whilst spontaneously sharing knowledge, feedback and ideas Your skills and experiences: Degree or equivalent qualification in a Scientific/Engineering subject (eg Systems, Electronic or Software Engineering, Physics, Mathematics) ideally 2.2 or above/Will consider 2024 graduates to start once qualified An analytical approach to understanding and solving new dilemmas Experience of developing theoretical electronic and/or software-based designs or control systems, including design analysis, modelling or simulation (possibly using tools such as Matlab or Simulink) - any language/control systems

Senior Mechanical Design Engineer - Hybrid - up to £60,000 - Winchester Objectives: Lead complex engineering projects from concept to validation Design innovative mechanical systems and equipment Provide guidance and mentorship to junior engineers Ensure designs meet manufacturing, quality and safety standards Responsibilities: Develop engineering concepts, drawings, prototypes Issue and validate design and process documents Consult with cross-functional teams Identify and solve complex engineering challenges Coach and mentor junior engineers Requirements: Expertise in concept, scheme, and detail design Advanced 3D CAD skills (SolidWorks) In-depth knowledge of international standards Strong project management abilities Analytical thinking and communication skills Commitment to developing engineers

As a System Engineer, you are responsible for implementing technical solutions throughout the entire Programme & life cycle. You will be one of the customer's primary technical contacts throughout the programme. Working closely with our customers and users, generating detailed requirements and implementing the changes in a live environment which is here to save lives for years to come is the opportunity. We are looking for a System Engineer who is up for this challenge. Your Main Responsibilities Network Implementation Deploy, configure, and maintain network hardware and software components, including Routers, Switches, Firewalls, load balancers, and VPNs Set up and manage network services such as DNS, DHCP, and VLANs Security Management Implement defined security measures to protect the network from external threats, including Firewalls, intrusion detection/prevention systems, and access controls Support regular security assessments and vulnerability assessments Network Monitoring and Optimization Monitor network performance, analyse data, and optimize network resources for maximum efficiency and reliability Troubleshoot network issues and coordinate resolution with other project members Systems Integration Integrate the Frequentis ATM product portfolio with 3rd party applications, such as eg, customer-provided network monitoring solutions, voice recording platforms or data warehouse applications, seamless communication, and functionality Collaborate with internal and external subject matter experts to ensure that the delivered solutions meet the requirements set Documentation and Reporting Produce and maintain detailed documentation of system/network configurations, changes, and incident reports Prepare and present reports on network performance, security, and capacity Contribute to the solution/system development Compliance and Standards Ensure network systems comply with industry standards and regulations Recovery and backup Develop and maintain recovery plans for network systems Implement backup and recovery procedures for critical network data Yo ur Experience Network infrastructure in safety critical environment is essential. Experience working within a Project delivery environment. Ability to Collaborate with cross-function teams including IT Support, Cyber Security professionals and PMO/Project Management functions. Communication systems experience desirable. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.

NEW: Laboratory Technician (Contract) For our globally renowned technology client based in Cambridge 5 days on-site required Description of Role We are seeking a laboratory technician to join our research team developing advanced optical cloud computing technologies. Responsibilities Operation of bespoke research equipment with efficient and accurate data capture. Refine, adapt, and document experimental procedures. Assist in the construction and assembly of research equipment. Following Laser-safety procedures. Operation of existing electronic test equipment. Organise and maintain inventory and storage. Follow cleanroom environment protocols. Required Engineering degree in optics/experimental physics or equivalent experience. Experience (2+ years) working with experimental lab equipment. Familiarity with optical hardware, optical testing techniques, and electronic lab equipment. Good MS Office skills (Word, Excel, PowerPoint, OneNote). Flexible to highly dynamic requirements. Ability to work under pressure in an organised and responsive manner. Good communication skills. Attention to detail, able to work methodically to maximise repeatability. Desired Experience working with lasers and free-space optical systems. Experience working in a multi-disciplinary and diverse team. Experience working in a research context. Simple programming or Scripting ability. Typical Day in the Role A typical day will involve the operation and maintenance of the optical experimental setups, and the analysis and reporting of experimental results. Compelling Story & Candidate Value Proposition The ideal candidate is someone who is passionate about contributing to team success through running an efficient and well organised optical laboratory, where equipment is always working, components are always to hand, experiments are always accurately recorded, data is always trustworthy and reconfiguring the equipment for the next hypothesis is always a delight. In return the team offers a friendly and collaborative environment where the challenge is always worthy, and the impact always has the potential that only a hyperscale cloud provider can offer. Skills: Laboratory optics lasers Experimental Research Data entry Computer skills Job Title: Lab Technician Location: Cambridge, UK Job Type: Contract Trading as TEKsystems. Allegis Group Limited, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at our website. To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go our website. We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice on our website for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.

The Opportunity: We are currently looking for an experienced DevOps Engineer to join our clients Systems Engineering Team based in Coventry. You will be working for a successful global technology company with a comprehensive portfolio of solutions across traffic management, smart urban mobility, road safety and connected vehicles. This role would suit an individual who has been working with cloud-based technology platforms in the engineering, telecoms, utilities, defence, systems or transport sectors. This role will be predominantly remote, but will require monthly visits to the head office in Coventry. Skills and Experience: Comprehensive knowledge of administering systems in Docker, Kubernetes and OpenShift Proven experience of deploying and administering Linux or UNIX based systems Knowledge of virtualisation, containerisation, Infrastructure as Code and DevOps tools, techniques & procedures Experience of troubleshooting IPv4 Networking, including routing and Switches Experience of automating tasks using Ansible, Bash, PowerShell, Puppet or Python Higher education with IT background (University degree is an asset) Experienced with Intelligent Transportation/Mobility Systems (preferred) Creative team player with superior problem-solving skills and outcome focused personality Excellent client-facing skills along with strong written and verbal communication skills Please call James Sample here at ISR Recruitment to learn more?

We are IT Recruitment Specialists partnered with a prestigious Global Consultancy who required a Safety Engineer- REMOTE will be remote for one of their public sector Clients based in the UK. IR35: This role is inside of IR35 Initial duration: 6 months Role and tasks Safety Engineer Consultant Background The Safety Engineer will work within the Combat System team performing safety activities in support or Combat Systems in development, manufacture and in-service. Specific Skills and Experience The Safety Engineer will be required to have the following skills and experience; The development of Safety Case reports, assessing Safety Case validity and safety assurance including ALARP assessments and providing Safety Argument for Design Authority Approval Comprehensive experience of hazard and risk management processes. Performing functional safety analysis using recognised methods. Risk Management, including Hazard Logs, Hazard Identification and Hazard Analysis. Performing Functional Hazard Analysis (FHA). System Safety Analysis; eg Fault Tree Analysis, Bow Tie Analysis. Software Safety assurance. MoD standards Def Stan 00-56 and Def Stan 00-55. An understanding of system development life cycle against the standard 'V-model' from concept to disposal. Assessing supplier safety compliance, in accordance with legislative and contractual safety requirements. Experience with Systems Engineering tools such as Enterprise Architect and DOORS is desirable. Compilation of Safety Arguments using Goal Structuring Notation (GSN) is desirable.  Deliverables and Outputs The Safety Engineer will typically produce the following deliverables and outputs; Safety Case reports and associated documentation. Hazard Logs and associated reports. Assessment of supplier safety compliance, in accordance with legislative and contractual safety requirements. Safety analysis activity reports such as Functional Hazard Analysis (FHA) and Failure Mode and Effects Analysis (FMEA) Safety input to life cycle management core engineering processes, design reviews (eg PDR and CDR). If you are interested in this position and would like to learn more, please send through your CV and we will get in touch with you as soon as possible. Please note, candidates are often Shortlisted within 48 hours.

Requirements Database Administrator - (IBM DOORS Next) Bristol/Hybrid As a Requirements Database Administrator (IBM DOORS Next) you'll have a role that's out of the ordinary. Supporting vital Skynet Service Delivery to deliver significant System upgrades bringing innovation and modernisation. Reporting to the Skynet Assurance Lead, you'll also be part of a multi-million pound programme of technology change. This is a fast-paced, challenging hands-on role on a significant project where test & integration of latest technology is integral to the project success. Day to day, you'll administrate the Skynet requirements information in accordance with project Engineering Management Plan, with a specific focus on integrity and safety of assurance evidence including support to the multi-disciplined team of Engineers who use the IBM Rational DOORS Requirements Tool. You'll also assist the Assurance team in delivering up to the minute baselines and reports for input to stakeholder meetings, Governance forums, Design Reviews and Readiness Assessment activities where VV&T are a key part of Assurance activities. Essential experience Proven experience within a test and integration engineering team (essential), ideally within a test systems discipline (desirable) In-depth knowledge of Systems Engineering processes on large and/or complex engineering projects, and acceptance of these Demonstratable experience in the defence or telecommunication industry, ideally MILSATCOM but not essential. Understanding of change and configuration control process  Proven experience within a Engineering team working with IBM Rational DOORS Next. Solid understanding of database schema creation, normalisation and maintenance. Ability to create bespoke views and reports for responsible owners (Assurance, IV&V and Work Package Leads) Creation of Requirements Acceptance Baselines/Reports (VRM) iaw Key Event Schedules. At ease with aiding new Users/Responsible Owners on navigating the Requirements Management Database and getting the best from it. Desirable IBM Certified Specialist - Rational DOORS Next Generation INCOSE Systems Engineering background.

Do you have a passion for designing mechanical systems that enhance comfort, safety, and energy efficiency in buildings? Join our team as a Mechanical Systems Design Engineer and help shape the future of sustainable building solutions. As a Mechanical Systems Design Engineer, you'll have a pivotal role in our mission. Your responsibilities will encompass: System Design: Collaborate with architects, clients, and fellow engineers to develop mechanical systems, including HVAC, plumbing, and fire protection, for diverse building projects. HVAC Design: Expertly size and select heating, cooling, and ventilation equipment to meet building requirements while prioritizing energy efficiency and indoor air quality. Plumbing Design: Design and specify plumbing systems, ensuring strict compliance with local plumbing codes and regulations. Fire Protection Design: Develop cutting-edge fire protection systems, including fire sprinklers and alarms, to safeguard both buildings and occupants from fire hazards. Energy Efficiency: Implement sustainable and energy-efficient design practices, incorporating renewable energy sources, efficient lighting, and insulation to minimize operational costs and environmental impact. Codes and Standards: Maintain unwavering compliance with all relevant building codes, standards, and regulations, including ASHRAE, NFPA, and local building codes. Computer-Aided Design (CAD): Leverage CAD software to create intricate design drawings, schematics, and layouts for mechanical systems, ensuring precision and accuracy. Load Calculations: Perform meticulous heating and cooling load calculations to determine system requirements and select the most suitable equipment for each project. Project Management: Take charge of mechanical design projects from inception to completion, overseeing budgeting, scheduling, and seamless coordination with contractors and stakeholders. Documentation: Prepare comprehensive design documentation, encompassing technical drawings, specifications, equipment schedules, and detailed project reports. Quality Assurance: Conduct rigorous design reviews, site inspections, and commissioning activities to guarantee that installed systems align with design intent and meet rigorous performance criteria. Qualifications: To excel in this role, you should bring: A bachelor's degree in mechanical engineering or a related field, with a focus on building services engineering. A Professional Engineer (PE) license or eligibility for licensure, depending on the jurisdiction. Proficiency in HVAC design software (eg, Carrier HAP, Trane TRACE, or similar), demonstrating your advanced technical skills. A deep understanding of building codes, energy efficiency standards, and industry best practices. Familiarity with Building Information Modelling (BIM) and related software (eg, Revit, AutoCAD MEP), enabling efficient collaboration and project coordination. Exceptional communication skills, facilitating effective teamwork with clients, architects, contractors, and other project stakeholders. Strong problem-solving abilities and an unwavering attention to detail, enabling you to tackle design challenges and optimize system performance effectively. Project management prowess, enabling you to successfully juggle multiple projects simultaneously while adhering to deadlines. Knowledge of sustainable and green building practices, as well as LEED certification, is a notable advantage.

Project Engineer/Strucutral Engineer (contract, Min 12 months) Location: London Area Skills - - Ability to undertake the full range of duties required of a structural engineer. - Ability to undertake project leadership responsibility for the large and more complex buildings. - Ability to achieve high quality designs and construction within the fee scale, on programme and within cost. - Ability to develop and maintain expertise in a number of specialist areas. - To assist Structural Engineering Manager and Senior Engineer and deputise when required. - Ability to communicate well, and to be able to present projects at officer and committee level. Previous experience - - Substantial experience as a structural engineer, including design, working drawings and contract administration of a variety of bridge and building structures, including monitoring and repair of structural defects. - Experience of successfully leading a project team and achieving good quality work within the fee scale, on programme and within cost. - Postholders are expected to hold a degree in Civil or Structural Engineering and have had over 5 years relevant experience in similar environment(s). - Experience of presenting schemes to clients Knowledge of - - Thorough knowledge of structural engineering practice and procedures, the design and construction process, Health and Safety, including CDM, quality management systems, fee management, project programming and resource planning - Flexible approach to problem solving. - Positive attitude to achieving tight deadlines. - Achievement in relation to Council's mainstreaming of Equal Opportunities policy. - Extensive experience in using MS Office and CAD packages. - Must have use of vehicle in carrying out duties.

£300 daily rate (Inside IR35) 6-month contract (with view to extend) Harwell, Didcot, UK. Your new organisation Step into a pivotal role as the Head of Electrical Engineering in our dynamic business. You'll be at the helm of our electrical engineering activities, steering the strategic and tactical services for product development. Your expertise will be key in delivering quality and effective cost management. In this role, you'll be the bridge between us and our stakeholders, providing essential technical support. You'll ensure that our electrical engineering strategies and processes are finely tuned to meet business and operational needs. This will empower us to compete effectively in the market on price, quality and delivery targets. Your New Role You'll also be responsible for coordinating with production to ensure our products are manufactured while upholding our standards for quality, safety, and environmental responsibility. Regular reporting on engineering activities to the Senior Management team will fall under your purview, ensuring we're always in the loop with accurate and timely updates on Key Performance Indicators. As a leader, you'll coach and mentor your team, fostering a high-performing environment that encourages continuous improvement, added value, and cost reductions. Your leadership will also be instrumental in translating our company's strategy into specific goals and departmental objectives. Working with the rest of the leadership team, you'll help decide which engineering projects are the highest priority against business targets and which can be executed with available resources. What you will need to succeed: We're looking for someone with experience in a similar contract electronic manufacturing environment. Excellent analytical and problem-solving abilities are a must, along with computer literacy. Proven project management and supplier management experience are also required. If you're a Fellow or Chartered Member of an industry-related professional body, that's a plus! We're looking for someone who can plan and deliver against project deadlines. Proven leadership and management skills are essential for optimising team performance and development. If you have current experience of AS9100 or similar quality systems, we'd love to hear from you! What you'll get in return: A competitive daily rate of £300 per day. If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.

Audio-Visual Engineer About Us: aap3 Ltd is a leading provider of technical solutions, offering a wide range of services, including cutting-edge Audio-Visual solutions. We specialise in designing, installing, and maintaining state-of-the-art AV systems that enhance communication and collaboration in various industries. As we continue to grow, we are seeking a talented AV Engineer to join our dynamic team. Position Overview: As an AV Engineer at aap3 Ltd, you will play a crucial role in ensuring the successful implementation and maintenance of Audio-Visual systems for our clients. You will be responsible for overseeing the entire life cycle of AV projects, from pre-staging and installation to client handover. Additionally, you will provide technical support, manage installations, and collaborate with cross-functional teams to deliver outstanding solutions. Responsibilities: Pre-Staging and Installation: Oversee and actively participate in pre-staging, installation, and configuration activities for a variety of Audio-Visual systems. Site Surveys and Documentation: Conduct site surveys and prepare necessary documentation to ensure the accuracy and efficiency of installations. Technical Support: Provide technical support, including preventative maintenance and break-fix deployments, to clients as needed. Pre-Sales Assistance: Collaborate with the Sales/Operations manager to assist in pre-sales activities when required. Documentation Improvement: Offer feedback on standard documentation, training guides, and onsite processes to enhance efficiency and effectiveness. Supplier Collaboration: Work closely with 3rd-party suppliers, providing support to fellow engineers when necessary. Issue Resolution: Collaborate with the Project Manager to resolve issues such as damaged or DOA parts to minimise project disruptions. Team Supervision: When appropriate, supervise and assist lesser skilled 3rd-party delivery teams to ensure successful project outcomes. Health and Safety: Observe and monitor H&S work procedures according to aap3 Ltd and on-site client company standards, assisting with Method Statements and Risk Assessments when required. Expense Management: Manage personal travel and business expenses in a cost-efficient manner, adhering to company policies. Skills and Experience Needed: Proven experience in the installation and maintenance of Audio-Visual systems. Strong technical and troubleshooting skills. Extensive understanding of current Audio-Visual vendors and an appetite to continue learning about new Hardware and Software updates as they are released. Ability to work effectively and efficiently in a remote environment with little direct supervision. Willingness to travel frequently across the UK, EMEA, and occasionally worldwide, and the ability to travel/work outside of normal business hours and for extended travel times. Attention to detail and the ability to follow aap3 installation and communication standards. Comfortable using a basic toolkit. Desirable valid UK driving licence. Desirable to have or be working towards CTS/CTS-I/CTS-D or similar qualifications. Salary range £30,000-40,000 per annum depending on experience.

Senior Hardware Field Service Engineer We have an exciting opportunity for a Senior Hardware Field Service Engineer to join our client on a permanent basis covering the South West London area. As a Hardware/Field Service/Server engineer you will have: server Hardware Break fix experience - Servers across the board, HP/Lenovo/Dell, good experience and knowledge is essential. Laptop/Server accreditations and retail experience would be desirable * There will be a requirement to cover on call on a rota basis Monday to Monday including weekends. Suitable candidates for this role will need a willingness to be flexible around travel and work hours. * This role offers a company car, tools, laptop, mobile phone. All expenses and mileage will be paid for and there will be overtime available plus an on call rate paid * Shifts will start at 08:30am and be 7.5 hours long. The Senior Hardware Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report in to Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded. * Any additional activity as directed by Senior Management. Key Experience Needed * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where applicable * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. "In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.

Senior Hardware Field Service Engineer We have an exciting opportunity for a Senior Hardware Field Service Engineer to join our client on a permanent basis covering the North East area. Candidates must be based within 30 minutes from the centre of Newcastle. As a Hardware/Field Service/Server engineer you will have: server Hardware Break fix experience - Servers across the board, HP/Lenovo/Dell, good experience and knowledge is essential. Laptop/Server accreditations and retail experience would be desirable * There will be a requirement to cover on call on a rota basis Monday to Monday including weekends. Suitable candidates for this role will need a willingness to be flexible around travel and work hours. * This role offers a company car, tools, laptop, mobile phone. All expenses and mileage will be paid for and there will be overtime available plus an on call rate paid * Shifts will start at 08:30am and be 7.5 hours long. The Senior Hardware Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report in to Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded. * Any additional activity as directed by Senior Management. Key Experience Needed * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where applicable * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.

The Role The Radiation Physics and Shielding Department has overall responsibility for the design and safety assessment of the Secondary Shielding on all UK Royal Navy nuclear submarines. The department has the capability to assess the performance of shield designs and to validate for design, manufacture, and installation. Radiation Physics and Shielding ensure that radiation doses to submarine crews are As Low As Reasonably Practicable (ALARP) and within prescribed limits and objectives. The solution required must meet both the ship safety requirements as well as the radiological safety criteria set out by the programme. This is achieved by modelling the nuclear reactor radiation hazard and calculating radiation levels throughout the submarine. Bespoke optimisation software is then run on high performance computing systems to design a radiation shielding system that ensures that both dose and system weight are minimised. To complement the design capability of the department, Radiation Physics and Shielding has extensive experience in the experimental validation of submarine secondary shielding and various other situations where radiation is present. BAE Systems - Submarines is contractually obliged to perform radiation surveys to demonstrate that the shield has been constructed and functions in accordance with the design intent. Measurements performed during commissioning provide a baseline for the performance of the radiation shield. Shield surveys provide an opportunity to perform detailed measurements that may be compared with calculated values and provide data that may be used to validate calculation processes. Key Accountabilities & Deliverables: The key activities undertaken by the Radiation Physics and Shielding department include, but are not limited to: Pressurised Water Reactor (PWR) Radiation Hazard Definition Neutron Radiation Transport Calculation Gamma Radiation Transport Calculation Submarine Occupancy Modelling Optimisation of Dose in the Submarine Environment System Design And Integration Management of Transverse Radiation Levels Shielding System Delivery Radiological Safety Consultancy Radiation Damage to Electronics Consultancy Finite Element Analysis Nuclear Activation Analysis Reactor Accident Consequence Analysis Software Maintenance and Development Network and HPC System Administration Design, Logistics and Management of Shield Survey Undertaking Shield Survey Radiation Detector Design Security Requirements: SC This role will require the person to hold full Security Clearance (SC) prior to working onsite. You will need to obtain a BPSS check as part of this process. You must currently hold or be eligible and willing to obtain SC and you must be eligible to work in the UK without sponsorship and have lived and worked in the UK for a minimum 5 year period. If you are unsure as to whether you are eligible, please contact me to discuss. This role is for UK EYES ONLY The Umbrella rate quoted above is the Gross Umbrella rate (ie the rate we pay to the Umbrella Company inclusive of ALL employment costs). Please note, the rate paid by the Umbrella will be less, as will a Limited Deemed rate or Agency PAYE rate. Please get in touch to discuss the rates via these different payment vehicles.

Background Do you have a keen interest in the rapidly evolving fusion industry but want something more hands-on and practical that will see tangible positive societal impact in timeframes measured in months rather than decades? Physics processes are rarely singular in their commercial usefulness. Since their inception Fission-born technologies have impacted our lives in a variety of far-reaching ways; spanning from nuclear medicine, plutonium RTG s powering every major space mission, and food sterilisation or mutation increasing crop yields and reducing famine. In many ways this is thanks to the movement sparked by the Atoms for Peace speech made by Dwight D. Eisenhower in 1953, which drove scientists, policy makers, and the public towards uses of fission outside of nuclear weapons. These non-power uses were enabled by fission and had a lasting positive impact on society which still endures today. Fusion is demonstrating the capacity to further these benefits well before any fusion power plant is plugged into the grid. Astral Systems is the only fusion reactor manufacturer with a tried and tested industrial pedigree. It is now well positioned to capitalise on the wide variety of markets and applications its new enhanced reactor design affords Role Overview Astral Systems is a fast-growing start-up that designs and manufactures compact fusion reactors as particle (neutron and protons) generators for fusion research and medical radioisotope generation. We are seeking a Senior Design & Production Engineer with extensive experience in designing, building and maintenance of scientific or industrial equipment, particularly in the fields of high-vacuum and high voltage systems, particle physics, radiation, fusion, and neutronics. This is a unique opportunity to work with a dynamic team in a fast-paced environment that is revolutionising the approach to commercial fusion. Job Duties & Responsibilities Inherit and quickly learn from existing design drawings, assembly procedures, patents and existing facilities, as well as work with experienced engineers to take onboard critical manufacturing know-how. Incorporate new IP into the existing design, working with the team to execute performance optimisation through new iterations. Design, build, and test experimental fusion reactors and related components, using your practical experience to refine and optimise the design. Collaborate with a team of engineers and scientists to develop innovative solutions for complex problems related to fusion and radiation technologies. Liaise with specialty component & process suppliers and mechanical machine shops Design jigs and assembly tools and develop assembly procedures Design and control instrumentation interfacing with high-voltage DC and pulsed power supplies and cooling systems Develop and implement safety procedures for handling high-voltage and radiation-emitting equipment. Troubleshoot and resolve technical issues with equipment and systems. Mentor and provide technical guidance to junior engineers and technicians. Write technical reports and present findings to the team and external partners. Hazard-Specific / Safety Critical Duties Working at height Manual handling Night working (11pm-6am) rare/unlikely Working with Ionising radiation Working with electricity (LV & HV up to 200 kV) Working with open and sealed radiation sources Requirements Bachelor's or Master's degree in mechanical, mechatronic, aerospace engineering. Experience in a related field such as the scientific instrumentation, nuclear, defence, aerospace, or space industries. At least 8 years of hands-on experience designing, assembling and testing complex scientific or industrial equipment within a low volume industrial manufacturing setting, with a focus on high-vacuum and high voltage systems. Experience with designing and building systems with precision engineering using the latest techniques whilst weighing costs and deadlines. Experience with high-voltage (up to 200 kV) and radiation safety protocols and regulations. Experience with interfacing automation & control programs and graphical user interfaces such as LabView. Strong problem-solving skills and ability to work independently and as part of a team. Excellent written and verbal communication skills. Ability to manage multiple projects and priorities in a fast-paced, deadline-driven environment. Familiarity with Microsoft office applications or similar. Proficiency with 3D CAD software (preferably Solid Edge) and data processing Benefits Competitive salary 30 days holiday Company share scheme Company bonus scheme Private medical insurance after 3 months of service Relocation or travel/commuting costs reimbursement scheme International work VISA cover, if required As a Senior Engineer, you will play a critical role in developing and improving our fusion reactor technology. You will inherit an industrially tried and tested design, decades in the making, and use your practical experience to refine and optimise it. You will work closely with the existing team of experienced engineers, learning from their expertise and contributing to the development of new IP. You will have the opportunity to be involved in all aspects of the development process, from design to testing to manufacturing, and to work with a team of dedicated professionals who are committed to bringing our technology to market. At Astral Systems, we are committed to fostering an inclusive and diverse workplace where all employees feel valued and respected. We offer competitive compensation packages, comprehensive benefits, and opportunities for professional development and growth. If you are a talented engineer with a passion for innovation and a desire to make a difference, please apply today by sending: A cover letter A detailed CV, including working track and achievements nuclearjobs.global