Oversee operation and management of routine and emergency services on a variety of critical systems such as; switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building and power monitoring systems Work with IT managers and other business leaders to coordinate projects, manage capacity and optimise plant safety, performance, reliability and efficiency Deliver quality service and ensure all customer demands are met Respond to out-of-hours emergency calls as second level escalation point for Data Centre facility related issues and/or failures. Establish performance benchmarks, conduct analysis and prepare reports on all aspects of the critical facility operations and maintenance. Review MCM, SOP's & EOP's to support the COLO planned maintenance. Work closely with Field Engineering to support and validated accurate power audits to support future rack deployments. Attend daily meetings with the COLO and evaluate planned work to support business. Additional Info Degree of Ambiguity Problem, opportunity, and business strategy are defined. Starting to see around corners and able to design solutions to meet assigned goals/needs. Works independently, but will seek direction. Uses technical judgment on technical issues for the site/campus and possibly, the region. Scope of Influence Influences across multiple partner and external teams in a cluster; may influence in a region. Starts to influence senior leaders. Work crosses multiple site locations in a single region; impacts workflow processes for a cluster and may impact for the region. Some roles work across teams to meet a goal. Provides training to Chief Engineers. Mentors and develops others. Execution Work is primarily tactical; learning to be strategic. Coordinates increasingly complex work activities within defined process paths. Mitigates immediate risk and develops risk assessments. Decides if they can handle or need to escalate. Helps define best practices. Optimizes procedures, process, and actively shares best practices. Tech Complexity Technical challenges are difficult7. Supervises highly complex troubleshooting and troubleshoots high complexity technical problems. Uses increased technical expertise to support business strategy. Supervises and provides technical guidance on preventive/corrective maintenance tasks to meet campus and cluster metrics. Acts as the SME for campus infrastructure. Evaluates and identifies equipment deficiencies. Creates workflows, emergency procedures, and processes to improve efficiency. Process Improvement Optimizes improvements for operational excellence. Creates process improvement plans and provides process improvement feedback to site leadership. Suggested Experience 4+ years of electrical, mechanical, HVAC, and fire system experience in a critical infrastructure.
29/09/2023
Project-based
Oversee operation and management of routine and emergency services on a variety of critical systems such as; switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building and power monitoring systems Work with IT managers and other business leaders to coordinate projects, manage capacity and optimise plant safety, performance, reliability and efficiency Deliver quality service and ensure all customer demands are met Respond to out-of-hours emergency calls as second level escalation point for Data Centre facility related issues and/or failures. Establish performance benchmarks, conduct analysis and prepare reports on all aspects of the critical facility operations and maintenance. Review MCM, SOP's & EOP's to support the COLO planned maintenance. Work closely with Field Engineering to support and validated accurate power audits to support future rack deployments. Attend daily meetings with the COLO and evaluate planned work to support business. Additional Info Degree of Ambiguity Problem, opportunity, and business strategy are defined. Starting to see around corners and able to design solutions to meet assigned goals/needs. Works independently, but will seek direction. Uses technical judgment on technical issues for the site/campus and possibly, the region. Scope of Influence Influences across multiple partner and external teams in a cluster; may influence in a region. Starts to influence senior leaders. Work crosses multiple site locations in a single region; impacts workflow processes for a cluster and may impact for the region. Some roles work across teams to meet a goal. Provides training to Chief Engineers. Mentors and develops others. Execution Work is primarily tactical; learning to be strategic. Coordinates increasingly complex work activities within defined process paths. Mitigates immediate risk and develops risk assessments. Decides if they can handle or need to escalate. Helps define best practices. Optimizes procedures, process, and actively shares best practices. Tech Complexity Technical challenges are difficult7. Supervises highly complex troubleshooting and troubleshoots high complexity technical problems. Uses increased technical expertise to support business strategy. Supervises and provides technical guidance on preventive/corrective maintenance tasks to meet campus and cluster metrics. Acts as the SME for campus infrastructure. Evaluates and identifies equipment deficiencies. Creates workflows, emergency procedures, and processes to improve efficiency. Process Improvement Optimizes improvements for operational excellence. Creates process improvement plans and provides process improvement feedback to site leadership. Suggested Experience 4+ years of electrical, mechanical, HVAC, and fire system experience in a critical infrastructure.
Role: Electrical/Mechanical Build Technician Location: Bristol Duration: 12 months initially Rate : up to £40/hour Umbrella Inside IR35 Job description: The ideal candidate would be a technician, with a focus on precision quality & build procedures, which require attention to detail. Most build work will be small and quite detailed. A problem-solving mindset and great communication skills with the engineers and ops staff around them would enable the technician to be a valued team member for the duration of contract. Experience working with a variety of metrology techniques would stand the candidate in good stead to learn new procedures, the majority of which are developed in house. Experience reading engineering documentation and drawings a necessity and feeding back improvements to documentation desired. Key responsibilities: Precision mechanical/electrical builds to technical drawing. Quality Assurance - identify defects in optics assemblies. Kitting parts for build against drawing. Build/improvement of test rigs, working closely with design engineers to leverage rapid prototyping (3D Printing, Laser cutting, modular lab-build kits). Running rudimentary software scripts for test rigs. QA incoming mechanical parts against drawing. Documenting build/QA procedures. Receiving goods-in & organizing shipments for goods out. Supporting good workshop culture Skills/experience Essential HNC or higher, or equivalent in technical discipline Ability to understand engineering documentation & drawings. Experience assembling in accordance with technical drawings. Excellent attention to detail and commitment to quality. Knowledge and experience of mechanical part inspection Experience working on procedures which are governed by ISO 9000 standards. (batch control/traceability) Flexible, problem-solving mindset. Familiarity or interest in programming basics. Desirable Experience handling optical assemblies. Experience using machine tools (pillar drill, lathe). Experience making coding in Python Member of a professional body (MEIT, IMechE)
29/09/2023
Project-based
Role: Electrical/Mechanical Build Technician Location: Bristol Duration: 12 months initially Rate : up to £40/hour Umbrella Inside IR35 Job description: The ideal candidate would be a technician, with a focus on precision quality & build procedures, which require attention to detail. Most build work will be small and quite detailed. A problem-solving mindset and great communication skills with the engineers and ops staff around them would enable the technician to be a valued team member for the duration of contract. Experience working with a variety of metrology techniques would stand the candidate in good stead to learn new procedures, the majority of which are developed in house. Experience reading engineering documentation and drawings a necessity and feeding back improvements to documentation desired. Key responsibilities: Precision mechanical/electrical builds to technical drawing. Quality Assurance - identify defects in optics assemblies. Kitting parts for build against drawing. Build/improvement of test rigs, working closely with design engineers to leverage rapid prototyping (3D Printing, Laser cutting, modular lab-build kits). Running rudimentary software scripts for test rigs. QA incoming mechanical parts against drawing. Documenting build/QA procedures. Receiving goods-in & organizing shipments for goods out. Supporting good workshop culture Skills/experience Essential HNC or higher, or equivalent in technical discipline Ability to understand engineering documentation & drawings. Experience assembling in accordance with technical drawings. Excellent attention to detail and commitment to quality. Knowledge and experience of mechanical part inspection Experience working on procedures which are governed by ISO 9000 standards. (batch control/traceability) Flexible, problem-solving mindset. Familiarity or interest in programming basics. Desirable Experience handling optical assemblies. Experience using machine tools (pillar drill, lathe). Experience making coding in Python Member of a professional body (MEIT, IMechE)
Test Technician Up to £22 per hour Outside IR35 London UK's finest environment friendly kit manufacturer is urgently looking for a contract TEST TECHNICIAN , to focuses on various mechanical and electrical testing to verify designs while in the development stages. The company promises to support green revolution and is one of the fast-growing companies in UK. The role will involve comprehending technical drawings, writing clear reports for the R&D department's consideration, and testing for shock, drop and vibration. Skills Required Knowledge of electric motor vehicles (e-bikes, scooters). Knowledge of mechanical workshops and machining capabilities. System schematics and electrical wiring diagrams. If you are interested in working for UK's finest eco-friendly kit manufacturer, then this is the opportunity for you. You can contact me. P.S: Company cannot provide visa sponsorship, so only candidates residing in UK and with the existing right to work will be considered for the role
29/09/2023
Project-based
Test Technician Up to £22 per hour Outside IR35 London UK's finest environment friendly kit manufacturer is urgently looking for a contract TEST TECHNICIAN , to focuses on various mechanical and electrical testing to verify designs while in the development stages. The company promises to support green revolution and is one of the fast-growing companies in UK. The role will involve comprehending technical drawings, writing clear reports for the R&D department's consideration, and testing for shock, drop and vibration. Skills Required Knowledge of electric motor vehicles (e-bikes, scooters). Knowledge of mechanical workshops and machining capabilities. System schematics and electrical wiring diagrams. If you are interested in working for UK's finest eco-friendly kit manufacturer, then this is the opportunity for you. You can contact me. P.S: Company cannot provide visa sponsorship, so only candidates residing in UK and with the existing right to work will be considered for the role
Senior Mechanical Engineer Sellafield Site, Warrington Up to £49 per hour, Inside IR35 Join the Future of Nuclear Waste Management! UK's one of the topmost International Infrastructure groups with capabilities in construction services, support services and infrastructure investments is looking for CONTRACT SENIOR Mechanical Engineer. As a Senior Mechanical Engineer, you will be reporting to the Substantiation Lead Engineer. You will play a key role in the development and authoring of Design Justification Reports (DJRs). You will be closing outstanding issues, providing support to area design teams, and ensuring the timely production and update of documentation. You will also be involved in checking the work of other engineers and designers. Key Skills and Requirements: Experience in a nuclear project. Development/authoring of design justification reports Detailed design of mechanical handling plant and equipment This is a unique opportunity to contribute to Sellafield's 100-year clean-up program and be a part of a project that will shape the future of nuclear waste management. If you are ready to take on this exciting challenge and meet the requirements, please share your up-to-date CV.
29/09/2023
Project-based
Senior Mechanical Engineer Sellafield Site, Warrington Up to £49 per hour, Inside IR35 Join the Future of Nuclear Waste Management! UK's one of the topmost International Infrastructure groups with capabilities in construction services, support services and infrastructure investments is looking for CONTRACT SENIOR Mechanical Engineer. As a Senior Mechanical Engineer, you will be reporting to the Substantiation Lead Engineer. You will play a key role in the development and authoring of Design Justification Reports (DJRs). You will be closing outstanding issues, providing support to area design teams, and ensuring the timely production and update of documentation. You will also be involved in checking the work of other engineers and designers. Key Skills and Requirements: Experience in a nuclear project. Development/authoring of design justification reports Detailed design of mechanical handling plant and equipment This is a unique opportunity to contribute to Sellafield's 100-year clean-up program and be a part of a project that will shape the future of nuclear waste management. If you are ready to take on this exciting challenge and meet the requirements, please share your up-to-date CV.
Our client a leading manufacturer is seeking to recruit a Mechanical Design Engineer. Working as part of the design team, the Design Engineer has the overall responsibility for the concept and detailed design of new products and assembly tooling, together with all drawings and associated project documentation. You will be working on complex aerospace engineering projects across a variety of remits Principal responsibilities will be to: . Produce detailed design/layouts to meet customer requirement and specification. . Support detailed estimates at the request of project leaders as a contribution to product development proposals. . Ensure that 'Design for Six Sigma' principles are observed throughout all phases of the design process and apply data rational analysis to arrive at robust solutions . Check design feasibility by performing design, stress and performance calculations using 3D CAD, finite element and traditional analysis methods. . Work in accordance with procedures and design standards and to contribute to developing best working practices. . Be responsible for the completion and checking of drawing packs and any other supporting documentation. This will involve prototype and production details and assembly drawings and associated tolerance analyses. . To liaise with production engineering and production planning in order to achieve a design/detail package best suited to production and to be aware of changes in manufacturing technology. . Support engineering change requests and process deviation/waivers where necessary. . Be committed to delivering against project schedules and meeting project milestones whilst working within a multi project team environment. Attributes/Skills Required/Sought: . Change oriented and able to develop innovative solutions in a fluid team environment . Customer aware and a strong results focused work ethic . Desirable to have 2-5 years' experience of CAD, ideally in the field of precision components. Recent graduates will be considered. . Basic understanding of configuration control . Basic knowledge of geometric dimensioning and tolerancing (GD&T) . Knowledge of six sigma and lean would be an advantage . Knowledge of machining and other manufacturing techniques advantageous . Ability to work in a flexible environment and stretch themselves beyond their comfort zone . Some understanding of generic engineering and/or Thermodynamic principles and the effect of material selection would be advantageous. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
29/09/2023
Project-based
Our client a leading manufacturer is seeking to recruit a Mechanical Design Engineer. Working as part of the design team, the Design Engineer has the overall responsibility for the concept and detailed design of new products and assembly tooling, together with all drawings and associated project documentation. You will be working on complex aerospace engineering projects across a variety of remits Principal responsibilities will be to: . Produce detailed design/layouts to meet customer requirement and specification. . Support detailed estimates at the request of project leaders as a contribution to product development proposals. . Ensure that 'Design for Six Sigma' principles are observed throughout all phases of the design process and apply data rational analysis to arrive at robust solutions . Check design feasibility by performing design, stress and performance calculations using 3D CAD, finite element and traditional analysis methods. . Work in accordance with procedures and design standards and to contribute to developing best working practices. . Be responsible for the completion and checking of drawing packs and any other supporting documentation. This will involve prototype and production details and assembly drawings and associated tolerance analyses. . To liaise with production engineering and production planning in order to achieve a design/detail package best suited to production and to be aware of changes in manufacturing technology. . Support engineering change requests and process deviation/waivers where necessary. . Be committed to delivering against project schedules and meeting project milestones whilst working within a multi project team environment. Attributes/Skills Required/Sought: . Change oriented and able to develop innovative solutions in a fluid team environment . Customer aware and a strong results focused work ethic . Desirable to have 2-5 years' experience of CAD, ideally in the field of precision components. Recent graduates will be considered. . Basic understanding of configuration control . Basic knowledge of geometric dimensioning and tolerancing (GD&T) . Knowledge of six sigma and lean would be an advantage . Knowledge of machining and other manufacturing techniques advantageous . Ability to work in a flexible environment and stretch themselves beyond their comfort zone . Some understanding of generic engineering and/or Thermodynamic principles and the effect of material selection would be advantageous. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Do you have a passion for designing mechanical systems that enhance comfort, safety, and energy efficiency in buildings? Join our team as a Mechanical Systems Design Engineer and help shape the future of sustainable building solutions. As a Mechanical Systems Design Engineer, you'll have a pivotal role in our mission. Your responsibilities will encompass: System Design: Collaborate with architects, clients, and fellow engineers to develop mechanical systems, including HVAC, plumbing, and fire protection, for diverse building projects. HVAC Design: Expertly size and select heating, cooling, and ventilation equipment to meet building requirements while prioritizing energy efficiency and indoor air quality. Plumbing Design: Design and specify plumbing systems, ensuring strict compliance with local plumbing codes and regulations. Fire Protection Design: Develop cutting-edge fire protection systems, including fire sprinklers and alarms, to safeguard both buildings and occupants from fire hazards. Energy Efficiency: Implement sustainable and energy-efficient design practices, incorporating renewable energy sources, efficient lighting, and insulation to minimize operational costs and environmental impact. Codes and Standards: Maintain unwavering compliance with all relevant building codes, standards, and regulations, including ASHRAE, NFPA, and local building codes. Computer-Aided Design (CAD): Leverage CAD software to create intricate design drawings, schematics, and layouts for mechanical systems, ensuring precision and accuracy. Load Calculations: Perform meticulous heating and cooling load calculations to determine system requirements and select the most suitable equipment for each project. Project Management: Take charge of mechanical design projects from inception to completion, overseeing budgeting, scheduling, and seamless coordination with contractors and stakeholders. Documentation: Prepare comprehensive design documentation, encompassing technical drawings, specifications, equipment schedules, and detailed project reports. Quality Assurance: Conduct rigorous design reviews, site inspections, and commissioning activities to guarantee that installed systems align with design intent and meet rigorous performance criteria. Qualifications: To excel in this role, you should bring: A bachelor's degree in mechanical engineering or a related field, with a focus on building services engineering. A Professional Engineer (PE) license or eligibility for licensure, depending on the jurisdiction. Proficiency in HVAC design software (eg, Carrier HAP, Trane TRACE, or similar), demonstrating your advanced technical skills. A deep understanding of building codes, energy efficiency standards, and industry best practices. Familiarity with Building Information Modelling (BIM) and related software (eg, Revit, AutoCAD MEP), enabling efficient collaboration and project coordination. Exceptional communication skills, facilitating effective teamwork with clients, architects, contractors, and other project stakeholders. Strong problem-solving abilities and an unwavering attention to detail, enabling you to tackle design challenges and optimize system performance effectively. Project management prowess, enabling you to successfully juggle multiple projects simultaneously while adhering to deadlines. Knowledge of sustainable and green building practices, as well as LEED certification, is a notable advantage.
28/09/2023
Full time
Do you have a passion for designing mechanical systems that enhance comfort, safety, and energy efficiency in buildings? Join our team as a Mechanical Systems Design Engineer and help shape the future of sustainable building solutions. As a Mechanical Systems Design Engineer, you'll have a pivotal role in our mission. Your responsibilities will encompass: System Design: Collaborate with architects, clients, and fellow engineers to develop mechanical systems, including HVAC, plumbing, and fire protection, for diverse building projects. HVAC Design: Expertly size and select heating, cooling, and ventilation equipment to meet building requirements while prioritizing energy efficiency and indoor air quality. Plumbing Design: Design and specify plumbing systems, ensuring strict compliance with local plumbing codes and regulations. Fire Protection Design: Develop cutting-edge fire protection systems, including fire sprinklers and alarms, to safeguard both buildings and occupants from fire hazards. Energy Efficiency: Implement sustainable and energy-efficient design practices, incorporating renewable energy sources, efficient lighting, and insulation to minimize operational costs and environmental impact. Codes and Standards: Maintain unwavering compliance with all relevant building codes, standards, and regulations, including ASHRAE, NFPA, and local building codes. Computer-Aided Design (CAD): Leverage CAD software to create intricate design drawings, schematics, and layouts for mechanical systems, ensuring precision and accuracy. Load Calculations: Perform meticulous heating and cooling load calculations to determine system requirements and select the most suitable equipment for each project. Project Management: Take charge of mechanical design projects from inception to completion, overseeing budgeting, scheduling, and seamless coordination with contractors and stakeholders. Documentation: Prepare comprehensive design documentation, encompassing technical drawings, specifications, equipment schedules, and detailed project reports. Quality Assurance: Conduct rigorous design reviews, site inspections, and commissioning activities to guarantee that installed systems align with design intent and meet rigorous performance criteria. Qualifications: To excel in this role, you should bring: A bachelor's degree in mechanical engineering or a related field, with a focus on building services engineering. A Professional Engineer (PE) license or eligibility for licensure, depending on the jurisdiction. Proficiency in HVAC design software (eg, Carrier HAP, Trane TRACE, or similar), demonstrating your advanced technical skills. A deep understanding of building codes, energy efficiency standards, and industry best practices. Familiarity with Building Information Modelling (BIM) and related software (eg, Revit, AutoCAD MEP), enabling efficient collaboration and project coordination. Exceptional communication skills, facilitating effective teamwork with clients, architects, contractors, and other project stakeholders. Strong problem-solving abilities and an unwavering attention to detail, enabling you to tackle design challenges and optimize system performance effectively. Project management prowess, enabling you to successfully juggle multiple projects simultaneously while adhering to deadlines. Knowledge of sustainable and green building practices, as well as LEED certification, is a notable advantage.
Embedded Software Engineer - Freelance - 12months + - Hybrid Options - Belgium For a client in product manufacturing I'm searching for a versatile Embedded Architect to join part of a multi-disciplinary team working in close collaboration with hardware and electronic engineers. Below are the requirements/role: Experience: Part of an Agile team (Device Control), working with other software engineers Software design using UML (class diagram, sequence diagram, state machine) Software implementation using C++ Software test using an in-house test framework (Model Test Framework) and Python Software test on simulation and on target. Working with a DevOps setup, including a build server and CI/CD environment (Azure DevOps, Jenkins) Skills: C++ Unified Modeling Language (UML) (CI/CD) Python diverse experience Bonus to have multi-disciplinary background in electrical, mechanical or software disciplines Details: Location: Gent - Hybrid Start Date: October - November (Flex) Language: English Contract Length: 12 Months + Possible extension The work is cutting edge and they offer great rates/flexibility
28/09/2023
Project-based
Embedded Software Engineer - Freelance - 12months + - Hybrid Options - Belgium For a client in product manufacturing I'm searching for a versatile Embedded Architect to join part of a multi-disciplinary team working in close collaboration with hardware and electronic engineers. Below are the requirements/role: Experience: Part of an Agile team (Device Control), working with other software engineers Software design using UML (class diagram, sequence diagram, state machine) Software implementation using C++ Software test using an in-house test framework (Model Test Framework) and Python Software test on simulation and on target. Working with a DevOps setup, including a build server and CI/CD environment (Azure DevOps, Jenkins) Skills: C++ Unified Modeling Language (UML) (CI/CD) Python diverse experience Bonus to have multi-disciplinary background in electrical, mechanical or software disciplines Details: Location: Gent - Hybrid Start Date: October - November (Flex) Language: English Contract Length: 12 Months + Possible extension The work is cutting edge and they offer great rates/flexibility
BMS Static Engineer Job Summary: The BMS Static Engineer is responsible for designing, programming, and configuring Trend Building Management Systems (BMS) to ensure the efficient and reliable operation of building systems. They collaborate with clients, engineers, and project teams to create customized control strategies and integrate various building systems. Key Responsibilities: System Design: Collaborate with project teams and clients to design BMS systems that meet the specific requirements and objectives of the facility. Programming and Configuration: Develop control logic, write code, and configure BMS software to ensure that building systems operate efficiently and in accordance with project specifications Testing and Commissioning: Conduct thorough testing and commissioning of BMS systems to ensure they function correctly and meet project goals. Troubleshooting: Diagnose and resolve technical issues and software glitches in BMS systems. Documentation: Maintain detailed documentation of control strategies, programming code, and system configurations. Client Training: Provide training to building operators and end-users on how to use and interact with the BMS interfaces. Collaboration: Work closely with project managers, electrical engineers, and other stakeholders to ensure seamless project execution. Compliance: Ensure that BMS systems comply with relevant industry standards and regulations. Qualifications and Skills: A bachelor's degree in electrical engineering, mechanical engineering, or a related field is typically required. Proficiency in programming and configuring BMS software and controllers (TREND, IQ Vision) Knowledge of building automation protocols and standards, such as BACnet, Modbus, or LonWorks. Strong problem-solving skills and the ability to troubleshoot complex technical issues. Excellent communication skills to work with clients, project teams, and contractors. Attention to detail and a commitment to delivering high-quality solutions. Familiarity with energy management principles and sustainability practices is a plus. Package: £47,000-£53,000pa
27/09/2023
Full time
BMS Static Engineer Job Summary: The BMS Static Engineer is responsible for designing, programming, and configuring Trend Building Management Systems (BMS) to ensure the efficient and reliable operation of building systems. They collaborate with clients, engineers, and project teams to create customized control strategies and integrate various building systems. Key Responsibilities: System Design: Collaborate with project teams and clients to design BMS systems that meet the specific requirements and objectives of the facility. Programming and Configuration: Develop control logic, write code, and configure BMS software to ensure that building systems operate efficiently and in accordance with project specifications Testing and Commissioning: Conduct thorough testing and commissioning of BMS systems to ensure they function correctly and meet project goals. Troubleshooting: Diagnose and resolve technical issues and software glitches in BMS systems. Documentation: Maintain detailed documentation of control strategies, programming code, and system configurations. Client Training: Provide training to building operators and end-users on how to use and interact with the BMS interfaces. Collaboration: Work closely with project managers, electrical engineers, and other stakeholders to ensure seamless project execution. Compliance: Ensure that BMS systems comply with relevant industry standards and regulations. Qualifications and Skills: A bachelor's degree in electrical engineering, mechanical engineering, or a related field is typically required. Proficiency in programming and configuring BMS software and controllers (TREND, IQ Vision) Knowledge of building automation protocols and standards, such as BACnet, Modbus, or LonWorks. Strong problem-solving skills and the ability to troubleshoot complex technical issues. Excellent communication skills to work with clients, project teams, and contractors. Attention to detail and a commitment to delivering high-quality solutions. Familiarity with energy management principles and sustainability practices is a plus. Package: £47,000-£53,000pa
Our client a leading manufacturer is seeking to recruit a Mechanical Design Engineer. Working as part of the design team, the Design Engineer has the overall responsibility for the concept and detailed design of new products and assembly tooling, together with all drawings and associated project documentation. You will be working on complex aerospace engineering projects across a variety of remits Principal responsibilities will be to: . Produce detailed design/layouts to meet customer requirement and specification. . Support detailed estimates at the request of project leaders as a contribution to product development proposals. . Ensure that 'Design for Six Sigma' principles are observed throughout all phases of the design process and apply data rational analysis to arrive at robust solutions . Check design feasibility by performing design, stress and performance calculations using 3D CAD, finite element and traditional analysis methods. . Work in accordance with procedures and design standards and to contribute to developing best working practices. . Be responsible for the completion and checking of drawing packs and any other supporting documentation. This will involve prototype and production details and assembly drawings and associated tolerance analyses. . To liaise with production engineering and production planning in order to achieve a design/detail package best suited to production and to be aware of changes in manufacturing technology. . Support engineering change requests and process deviation/waivers where necessary. . Be committed to delivering against project schedules and meeting project milestones whilst working within a multi project team environment. Attributes/Skills Required/Sought: . Change oriented and able to develop innovative solutions in a fluid team environment . Customer aware and a strong results focused work ethic . Desirable to have 2-5 years' experience of CAD, ideally in the field of precision components. Recent graduates will be considered. . Basic understanding of configuration control . Basic knowledge of geometric dimensioning and tolerancing (GD&T) . Knowledge of six sigma and lean would be an advantage . Knowledge of machining and other manufacturing techniques advantageous . Ability to work in a flexible environment and stretch themselves beyond their comfort zone . Some understanding of generic engineering and/or Thermodynamic principles and the effect of material selection would be advantageous. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
27/09/2023
Project-based
Our client a leading manufacturer is seeking to recruit a Mechanical Design Engineer. Working as part of the design team, the Design Engineer has the overall responsibility for the concept and detailed design of new products and assembly tooling, together with all drawings and associated project documentation. You will be working on complex aerospace engineering projects across a variety of remits Principal responsibilities will be to: . Produce detailed design/layouts to meet customer requirement and specification. . Support detailed estimates at the request of project leaders as a contribution to product development proposals. . Ensure that 'Design for Six Sigma' principles are observed throughout all phases of the design process and apply data rational analysis to arrive at robust solutions . Check design feasibility by performing design, stress and performance calculations using 3D CAD, finite element and traditional analysis methods. . Work in accordance with procedures and design standards and to contribute to developing best working practices. . Be responsible for the completion and checking of drawing packs and any other supporting documentation. This will involve prototype and production details and assembly drawings and associated tolerance analyses. . To liaise with production engineering and production planning in order to achieve a design/detail package best suited to production and to be aware of changes in manufacturing technology. . Support engineering change requests and process deviation/waivers where necessary. . Be committed to delivering against project schedules and meeting project milestones whilst working within a multi project team environment. Attributes/Skills Required/Sought: . Change oriented and able to develop innovative solutions in a fluid team environment . Customer aware and a strong results focused work ethic . Desirable to have 2-5 years' experience of CAD, ideally in the field of precision components. Recent graduates will be considered. . Basic understanding of configuration control . Basic knowledge of geometric dimensioning and tolerancing (GD&T) . Knowledge of six sigma and lean would be an advantage . Knowledge of machining and other manufacturing techniques advantageous . Ability to work in a flexible environment and stretch themselves beyond their comfort zone . Some understanding of generic engineering and/or Thermodynamic principles and the effect of material selection would be advantageous. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
We are currently seeking a Senior Design Draughtsperson to join our Mechanical Engineering department in Denham. In this pivotal role, you will be responsible for generating precise engineering drawings that are ready for manufacturing without ambiguity. Effective communication with team members, project managers, manufacturing, and assembly teams is essential to produce drawings that are "fit for purpose" and "right first time." This role may also involve mentoring team members based on skills and experience. Responsibilities: Create precise engineering drawings from CAD models. Modify/update 3D models and engineering drawings as needed. Design with cost, quality, schedule, and safety in mind. Collaborate with Production Engineering for alignment. Use GD&T and follow relevant standards. Identify and resolve part clashes. Process drawing revisions and data control. Mentor team members as needed. Requirements: Mechanical Engineering qualification. Engineering Apprenticeship. Proficiency in 3D CAD modelling. Familiarity with MS Office. Experience with NX 12 & Teamcenter 11 (advantageous). Strong attention to detail. Deadline-driven. Problem-solving skills. Collaborative mindset. Good communication skills. Join us and contribute to aerospace innovation!
27/09/2023
Project-based
We are currently seeking a Senior Design Draughtsperson to join our Mechanical Engineering department in Denham. In this pivotal role, you will be responsible for generating precise engineering drawings that are ready for manufacturing without ambiguity. Effective communication with team members, project managers, manufacturing, and assembly teams is essential to produce drawings that are "fit for purpose" and "right first time." This role may also involve mentoring team members based on skills and experience. Responsibilities: Create precise engineering drawings from CAD models. Modify/update 3D models and engineering drawings as needed. Design with cost, quality, schedule, and safety in mind. Collaborate with Production Engineering for alignment. Use GD&T and follow relevant standards. Identify and resolve part clashes. Process drawing revisions and data control. Mentor team members as needed. Requirements: Mechanical Engineering qualification. Engineering Apprenticeship. Proficiency in 3D CAD modelling. Familiarity with MS Office. Experience with NX 12 & Teamcenter 11 (advantageous). Strong attention to detail. Deadline-driven. Problem-solving skills. Collaborative mindset. Good communication skills. Join us and contribute to aerospace innovation!
ROLE: The Energy Manager (EM) is a member of the Energy Management Services (EMS) team reporting to the National Service Delivery Manager. The EM will support the EMS team in the delivery of contracted energy and net zero services, products and solutions. The EM will be the technical lead interacting with internal and external stakeholders as required. The EM will also be responsible for reviewing technical outputs from various sources to support solutions and costs as part of ECS output from energy audits, compliance services and grant funding applications. The EM will be able to quickly understand and absorb technical solutions, manipulate data, articulate the relevant information to their client portfolio and ideally, have experience of various facets of the energy services industry. Job Accountabilities: Assist in completing grant funding applications, including supporting documentation. Working with spreadsheets, databases and web-based platforms/tools to review energy use and verify savings models. Carry out general energy audits. Delivering Energy Savings Opportunity Scheme, Streamlined Energy Carbon Reporting and Public Sector Decarbonisation Scheme audits. Support the development and provision of energy audit reports, complete with costed solutions and paybacks. Qualifications (some or all of the following): Demonstrate experience in customer facing or internal cross discipline team role Experience of technical, engineering or building services 17th or 18th Edition Wiring Regulations Mechanical engineering design, especially thermal dynamics Have or ability to pass Security Vetting and Enhanced DBS Proficient in Microsoft Office Suite (Word/Excel/Powerpoint) Experience of databases or other information points Understanding of contracts, scopes of work, etc. Compliance reporting Commercial awareness Package: £40,000 - £45000 £6800 car allowance pension private health care company discounts
27/09/2023
Full time
ROLE: The Energy Manager (EM) is a member of the Energy Management Services (EMS) team reporting to the National Service Delivery Manager. The EM will support the EMS team in the delivery of contracted energy and net zero services, products and solutions. The EM will be the technical lead interacting with internal and external stakeholders as required. The EM will also be responsible for reviewing technical outputs from various sources to support solutions and costs as part of ECS output from energy audits, compliance services and grant funding applications. The EM will be able to quickly understand and absorb technical solutions, manipulate data, articulate the relevant information to their client portfolio and ideally, have experience of various facets of the energy services industry. Job Accountabilities: Assist in completing grant funding applications, including supporting documentation. Working with spreadsheets, databases and web-based platforms/tools to review energy use and verify savings models. Carry out general energy audits. Delivering Energy Savings Opportunity Scheme, Streamlined Energy Carbon Reporting and Public Sector Decarbonisation Scheme audits. Support the development and provision of energy audit reports, complete with costed solutions and paybacks. Qualifications (some or all of the following): Demonstrate experience in customer facing or internal cross discipline team role Experience of technical, engineering or building services 17th or 18th Edition Wiring Regulations Mechanical engineering design, especially thermal dynamics Have or ability to pass Security Vetting and Enhanced DBS Proficient in Microsoft Office Suite (Word/Excel/Powerpoint) Experience of databases or other information points Understanding of contracts, scopes of work, etc. Compliance reporting Commercial awareness Package: £40,000 - £45000 £6800 car allowance pension private health care company discounts
Manufacturing Engineer - Assembly and Integration Bolton/Stevenage/Bristol 12 months + Full Time - Hybrid Working Available With a Minimum of 3 Days onsite Responsibilities: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non Conformance Process using SAP. Role requirements (skills, training and qualifications) Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21. Formal further education certificate to HNC or equivalent certificate. 5 years' experience within an engineering discipline. Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within, and contribute to a team environment. Recognise and understand customer requirements, and respond to them. Understand and work to Company Processes and Procedures. Have the ability to communicate both within the working group and at various levels of the organisation. Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 Vocational NVQ3 with Further Education, BTEC ONC/HNC British Engineering Degree in Manufacturing HNC or HND Plus Time Served
27/09/2023
Project-based
Manufacturing Engineer - Assembly and Integration Bolton/Stevenage/Bristol 12 months + Full Time - Hybrid Working Available With a Minimum of 3 Days onsite Responsibilities: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non Conformance Process using SAP. Role requirements (skills, training and qualifications) Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21. Formal further education certificate to HNC or equivalent certificate. 5 years' experience within an engineering discipline. Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within, and contribute to a team environment. Recognise and understand customer requirements, and respond to them. Understand and work to Company Processes and Procedures. Have the ability to communicate both within the working group and at various levels of the organisation. Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 Vocational NVQ3 with Further Education, BTEC ONC/HNC British Engineering Degree in Manufacturing HNC or HND Plus Time Served
Manufacturing Engineer - Assembly and Integration Bolton/Stevenage/Bristol 12 months + Full Time - Hybrid Working Available With a Minimum of 3 Days onsite Responsibilities: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non Conformance Process using SAP. Role requirements (skills, training and qualifications) Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21. Formal further education certificate to HNC or equivalent certificate. 5 years' experience within an engineering discipline. Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within, and contribute to a team environment. Recognise and understand customer requirements, and respond to them. Understand and work to Company Processes and Procedures. Have the ability to communicate both within the working group and at various levels of the organisation. Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 Vocational NVQ3 with Further Education, BTEC ONC/HNC British Engineering Degree in Manufacturing HNC or HND Plus Time Served
27/09/2023
Project-based
Manufacturing Engineer - Assembly and Integration Bolton/Stevenage/Bristol 12 months + Full Time - Hybrid Working Available With a Minimum of 3 Days onsite Responsibilities: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non Conformance Process using SAP. Role requirements (skills, training and qualifications) Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21. Formal further education certificate to HNC or equivalent certificate. 5 years' experience within an engineering discipline. Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within, and contribute to a team environment. Recognise and understand customer requirements, and respond to them. Understand and work to Company Processes and Procedures. Have the ability to communicate both within the working group and at various levels of the organisation. Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 Vocational NVQ3 with Further Education, BTEC ONC/HNC British Engineering Degree in Manufacturing HNC or HND Plus Time Served
ConSol Partners are looking for an Engineering Delivery Manager to join one of their leading clients in the Defence and Aerospace market. This is a great opportunity to be part of a high profile project and make a real difference with the work you are doing. On offer is a permanent contract with great benefits and amazing L&D facilities if needed. Key Responsibilities Leading a multidisciplinary technical team, including System Engineering, Control Systems, Mechanical, Electrical, Software, Safety, Security and Verification & Validation Providing a senior technical interface with the customer Delivering the project to cost and schedule Responsible for the engineering management plan and adherence to it Ensure adequate engineering resource and skill sets are maintained for the project Demonstrate technical progress to a steering group Engage with the technical governance team to apply lessons learnt from other projects Support the preparation of contract changes and proposals Be aware of and comply with company standards of conduct and all relevant statutory requirements Carry out any other reasonable management request Essential qualifications/experience Degree-qualified in a relevant engineering/technical subject (eg electrical engineering or similar). Substantial experience in a Systems Engineering role Knowledge of System Engineering models and techniques. Experience of systems requirements management, definition, design, integration, acceptance and analysis Demonstrable knowledge and experience in requirements management Team leadership or a strong aptitude for managing and developing people Able to work with people effectively at all levels, using well-developed influencing and interpersonal skills Able to deal with internal and external customers in a professional way, both in person, over the phone and by email If this is something you are interested in, please apply directly or send your CV for further information.
26/09/2023
Full time
ConSol Partners are looking for an Engineering Delivery Manager to join one of their leading clients in the Defence and Aerospace market. This is a great opportunity to be part of a high profile project and make a real difference with the work you are doing. On offer is a permanent contract with great benefits and amazing L&D facilities if needed. Key Responsibilities Leading a multidisciplinary technical team, including System Engineering, Control Systems, Mechanical, Electrical, Software, Safety, Security and Verification & Validation Providing a senior technical interface with the customer Delivering the project to cost and schedule Responsible for the engineering management plan and adherence to it Ensure adequate engineering resource and skill sets are maintained for the project Demonstrate technical progress to a steering group Engage with the technical governance team to apply lessons learnt from other projects Support the preparation of contract changes and proposals Be aware of and comply with company standards of conduct and all relevant statutory requirements Carry out any other reasonable management request Essential qualifications/experience Degree-qualified in a relevant engineering/technical subject (eg electrical engineering or similar). Substantial experience in a Systems Engineering role Knowledge of System Engineering models and techniques. Experience of systems requirements management, definition, design, integration, acceptance and analysis Demonstrable knowledge and experience in requirements management Team leadership or a strong aptitude for managing and developing people Able to work with people effectively at all levels, using well-developed influencing and interpersonal skills Able to deal with internal and external customers in a professional way, both in person, over the phone and by email If this is something you are interested in, please apply directly or send your CV for further information.
Our client a leading manufacturer is seeking to recruit a Mechanical Design Engineer. Working as part of the design team, the Design Engineer has the overall responsibility for the concept and detailed design of new products and assembly tooling, together with all drawings and associated project documentation. You will be working on complex aerospace engineering projects across a variety of remits Principal responsibilities will be to: . Produce detailed design/layouts to meet customer requirement and specification. . Support detailed estimates at the request of project leaders as a contribution to product development proposals. . Ensure that 'Design for Six Sigma' principles are observed throughout all phases of the design process and apply data rational analysis to arrive at robust solutions . Check design feasibility by performing design, stress and performance calculations using 3D CAD, finite element and traditional analysis methods. . Work in accordance with procedures and design standards and to contribute to developing best working practices. . Be responsible for the completion and checking of drawing packs and any other supporting documentation. This will involve prototype and production details and assembly drawings and associated tolerance analyses. . To liaise with production engineering and production planning in order to achieve a design/detail package best suited to production and to be aware of changes in manufacturing technology. . Support engineering change requests and process deviation/waivers where necessary. . Be committed to delivering against project schedules and meeting project milestones whilst working within a multi project team environment. Attributes/Skills Required/Sought: . Change oriented and able to develop innovative solutions in a fluid team environment . Customer aware and a strong results focused work ethic . Desirable to have 2-5 years' experience of CAD, ideally in the field of precision components. Recent graduates will be considered. . Basic understanding of configuration control . Basic knowledge of geometric dimensioning and tolerancing (GD&T) . Knowledge of six sigma and lean would be an advantage . Knowledge of machining and other manufacturing techniques advantageous . Ability to work in a flexible environment and stretch themselves beyond their comfort zone . Some understanding of generic engineering and/or Thermodynamic principles and the effect of material selection would be advantageous. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
26/09/2023
Project-based
Our client a leading manufacturer is seeking to recruit a Mechanical Design Engineer. Working as part of the design team, the Design Engineer has the overall responsibility for the concept and detailed design of new products and assembly tooling, together with all drawings and associated project documentation. You will be working on complex aerospace engineering projects across a variety of remits Principal responsibilities will be to: . Produce detailed design/layouts to meet customer requirement and specification. . Support detailed estimates at the request of project leaders as a contribution to product development proposals. . Ensure that 'Design for Six Sigma' principles are observed throughout all phases of the design process and apply data rational analysis to arrive at robust solutions . Check design feasibility by performing design, stress and performance calculations using 3D CAD, finite element and traditional analysis methods. . Work in accordance with procedures and design standards and to contribute to developing best working practices. . Be responsible for the completion and checking of drawing packs and any other supporting documentation. This will involve prototype and production details and assembly drawings and associated tolerance analyses. . To liaise with production engineering and production planning in order to achieve a design/detail package best suited to production and to be aware of changes in manufacturing technology. . Support engineering change requests and process deviation/waivers where necessary. . Be committed to delivering against project schedules and meeting project milestones whilst working within a multi project team environment. Attributes/Skills Required/Sought: . Change oriented and able to develop innovative solutions in a fluid team environment . Customer aware and a strong results focused work ethic . Desirable to have 2-5 years' experience of CAD, ideally in the field of precision components. Recent graduates will be considered. . Basic understanding of configuration control . Basic knowledge of geometric dimensioning and tolerancing (GD&T) . Knowledge of six sigma and lean would be an advantage . Knowledge of machining and other manufacturing techniques advantageous . Ability to work in a flexible environment and stretch themselves beyond their comfort zone . Some understanding of generic engineering and/or Thermodynamic principles and the effect of material selection would be advantageous. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Mechanical Project Engineer Derby £35k + Benefits Are you a Mechanical Engineer/Mechanical Project Engineer/Mechanical Project & Process Engineer/Commercial Engineer/Project Design Engineer/Project Sales Engineer/Projects Engineer/Applications Design Engineer? Do have a mix of Project Engineering AND Mechanical Engineering experience within a Process and/or Structural Steelwork environment? Do you want to work for a Global Engineering Company who that offers both hybrid & flexible working, as well as a generous benefits package including Pension, Private Healthcare, holiday buy & sell scheme etc? If so, then please see below. Mechanical Project Engineer Derby £35k + Benefits Progressive Engineering and a Global Engineering Company are looking to recruit a Mechanical Project Engineer for their Engineering Office near Derby , owing to succession planning & project pipeline for 2023-25+. Based near Derby, reporting into the Principal Design Engineer & Engineering Manager, the Mechanical Project Engineer will be responsible from Sales Handover, managing the technical requirements capture & specification, design process, (PFD, P&ID's) and delivery & commissioning of the project to the customer, as well as providing technical support to customers in a variety of industries, including Renewables, Marine, Petrochemical, Oil, Gas & Energy. Specifically, this will include: Reviewing and technical translation of customer specific requirements from contract documentation Providing technical assistance, detailing equipment selections, specifications, and production of design deliverables to support a variety of products and systems, including design verification and engineering in accordance to Client Spec and National/International standards Involved in execution phase of the project as well as providing support during the commissioning stages Overseeing CAD Engineers to generate and review PFD's/P&ID's for customer requirements Project managing customer orders through internal processes, as well as technical support for both Customers & Sales Team Project review for custom orders Communication & Relationship Development with Customers Qualification & Experience Required for Mechanical Project Engineer role: HNC/HND/Mechanical Engineering Degree (or similar - Aerospace/Aeronautical/Automotive/Motorsport Engineering etc) Project Engineering experience in areas such as Chemical Process Equipment/Plant Packages/Structural Steelwork/Piping/Welding/ Prior project experience within an Engineering/Manufacturing environment (ideally within machining/welding/fabrication/piping manufacturing) Prior experience in PFD's/P&ID creation & technical review with CAD Engineers (AutoCAD) and ability to carry out Mechanical Process Calculations (including Flow-Rate, Pressure etc) Good knowledge of Mechanical Engineering and Manufacturing/Production Process fundamentals Knowledge and experience of ATEX, IEC Ex, HAZOP would be beneficial Strong commercial capability & prior experience in customer technical requirements capture & project delivery etc Good knowledge of full project life cycle (from RFQ & customer requirements capture through to delivery) Excellent Customer Facing & Service skills, including both written and verbal communication A 'can do' attitude and positive approach to challenges Team player Able to work well under pressure and to be flexible where required Proactiveness For the successful Mechanical Project Engineer, a salary up to £35,000 is on offer + benefits package, including Pension, Private Healthcare, Holiday Buy & Sell Scheme and this Mechanical Project Engineer role is commutable from Derby, Matlock, Nottingham, Burton-Upon-Trent, Loughborough, Ashby-de-la-Zouch, Melbourne, Ashbourne, Alfreton, Swadlincote, Kegworth & Castle Donnington (and this client does offer both hybrid & flexible working re start & finish times). PLEASE NOTE THAT THIS MECHANICAL PROJECT ENGINEER ROLE IS A STAFF POSITION To be considered for this Mechanical Project Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
26/09/2023
Full time
Mechanical Project Engineer Derby £35k + Benefits Are you a Mechanical Engineer/Mechanical Project Engineer/Mechanical Project & Process Engineer/Commercial Engineer/Project Design Engineer/Project Sales Engineer/Projects Engineer/Applications Design Engineer? Do have a mix of Project Engineering AND Mechanical Engineering experience within a Process and/or Structural Steelwork environment? Do you want to work for a Global Engineering Company who that offers both hybrid & flexible working, as well as a generous benefits package including Pension, Private Healthcare, holiday buy & sell scheme etc? If so, then please see below. Mechanical Project Engineer Derby £35k + Benefits Progressive Engineering and a Global Engineering Company are looking to recruit a Mechanical Project Engineer for their Engineering Office near Derby , owing to succession planning & project pipeline for 2023-25+. Based near Derby, reporting into the Principal Design Engineer & Engineering Manager, the Mechanical Project Engineer will be responsible from Sales Handover, managing the technical requirements capture & specification, design process, (PFD, P&ID's) and delivery & commissioning of the project to the customer, as well as providing technical support to customers in a variety of industries, including Renewables, Marine, Petrochemical, Oil, Gas & Energy. Specifically, this will include: Reviewing and technical translation of customer specific requirements from contract documentation Providing technical assistance, detailing equipment selections, specifications, and production of design deliverables to support a variety of products and systems, including design verification and engineering in accordance to Client Spec and National/International standards Involved in execution phase of the project as well as providing support during the commissioning stages Overseeing CAD Engineers to generate and review PFD's/P&ID's for customer requirements Project managing customer orders through internal processes, as well as technical support for both Customers & Sales Team Project review for custom orders Communication & Relationship Development with Customers Qualification & Experience Required for Mechanical Project Engineer role: HNC/HND/Mechanical Engineering Degree (or similar - Aerospace/Aeronautical/Automotive/Motorsport Engineering etc) Project Engineering experience in areas such as Chemical Process Equipment/Plant Packages/Structural Steelwork/Piping/Welding/ Prior project experience within an Engineering/Manufacturing environment (ideally within machining/welding/fabrication/piping manufacturing) Prior experience in PFD's/P&ID creation & technical review with CAD Engineers (AutoCAD) and ability to carry out Mechanical Process Calculations (including Flow-Rate, Pressure etc) Good knowledge of Mechanical Engineering and Manufacturing/Production Process fundamentals Knowledge and experience of ATEX, IEC Ex, HAZOP would be beneficial Strong commercial capability & prior experience in customer technical requirements capture & project delivery etc Good knowledge of full project life cycle (from RFQ & customer requirements capture through to delivery) Excellent Customer Facing & Service skills, including both written and verbal communication A 'can do' attitude and positive approach to challenges Team player Able to work well under pressure and to be flexible where required Proactiveness For the successful Mechanical Project Engineer, a salary up to £35,000 is on offer + benefits package, including Pension, Private Healthcare, Holiday Buy & Sell Scheme and this Mechanical Project Engineer role is commutable from Derby, Matlock, Nottingham, Burton-Upon-Trent, Loughborough, Ashby-de-la-Zouch, Melbourne, Ashbourne, Alfreton, Swadlincote, Kegworth & Castle Donnington (and this client does offer both hybrid & flexible working re start & finish times). PLEASE NOTE THAT THIS MECHANICAL PROJECT ENGINEER ROLE IS A STAFF POSITION To be considered for this Mechanical Project Engineer role, please apply via the link below. To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Project Manager - ITALY - TURIN - 9 months - Manufacturing, Robotics, Mechatronics - Production - Hardware Support Engineering (HSE) - Packaging We are seeking exceptional candidates who possess a blend of technical and customer-facing skills to successfully support Mechatronics & Sustainable Packaging (MSP) packing machines. Hardware Support Engineers (HSEs) are responsible for engineering support of on-site maintaining MSP technologies in Europe. The HSE will partner with global engineering and support experts to tailor global best practices to European robotics applications including technology or vendor differences and local requirements. The MSP will provide technical expertise and guidance to sites through: providing technical expertise and coaching on preventative maintenance and troubleshooting, monitoring performance and compliance, deep diving issues and supporting corrective actions, creating processes and mechanism to improve performance, and supporting site launch and ramp-up. HSE will consolidate VOC feedback to identify and drive opportunities to improve training, procedures, mechanisms, and tooling. A successful candidate will have a consulting aptitude, strong ownership, passion for hardware and operational troubleshooting, customer-facing skills, and a desire to work within an elite group at the leading edge of technology across Amazon's European operations. Core Job Responsibilities: * Enable local site maintenance technicians to effectively maintain advanced technology systems by creating and maintaining maintenance procedural and troubleshooting documentation * Serve as the escalation point for local site maintenance technicians when complex system issues impacting machine performance or availability arise * Monitor system performance across the EU region and utilize system KPIs and technician feedback to identify and lead continuous improvement initiatives * Provide on-site support for new product implementations, upgrades, routine hardware audits, and troubleshooting for advanced robotics systems * Develop and implement a process for ensuring spare part availability across the EU region for the systems you support * Produce regular reports on the safety, reliability, and performance of the products that you support * Identify and drive projects to improve the availability, quality, or maintainability of robotics equipment. * Provide on call after-hours support for high severity events related to products that you support * 50%-75% travel expected in UK/EU/NA Basic Qualifications * BS in Engineering (Mechanical, Electrical, Industrial, or related field) * 3+ years of experience designing, deploying, or supporting mechatronic or robotic systems * Knowledge and/or working experience with statistical analysis tools, data visualization, and program management * Experience leading disciplined technical problem-solving * Experience with 8D, 5-Why, Fishbone, FMEA, or comparable root cause analysis methodologies * Excellent communication skills with the ability to articulate complex technical issues * Ability to manage multiple high-priority tasks simultaneously Preferred Qualifications * MS in Engineering (Mechanical, Electrical, Industrial, or related field) * Knowledge and or working experience in dealing with big data * Familiarity with PLC programming * Familiarity with industry standard CAD & FEA design tools, industry trends, and design for supportability * Experience creating and implementing scalable standard operating procedures, performance metrics, and feedback mechanisms * Experience managing new hardware implementation projects Project Manager - ITALY - TURIN - 9 months - Manufacturing, Robotics, Mechatronics - Production - Hardware Support Engineering (HSE) - Packaging
26/09/2023
Project-based
Project Manager - ITALY - TURIN - 9 months - Manufacturing, Robotics, Mechatronics - Production - Hardware Support Engineering (HSE) - Packaging We are seeking exceptional candidates who possess a blend of technical and customer-facing skills to successfully support Mechatronics & Sustainable Packaging (MSP) packing machines. Hardware Support Engineers (HSEs) are responsible for engineering support of on-site maintaining MSP technologies in Europe. The HSE will partner with global engineering and support experts to tailor global best practices to European robotics applications including technology or vendor differences and local requirements. The MSP will provide technical expertise and guidance to sites through: providing technical expertise and coaching on preventative maintenance and troubleshooting, monitoring performance and compliance, deep diving issues and supporting corrective actions, creating processes and mechanism to improve performance, and supporting site launch and ramp-up. HSE will consolidate VOC feedback to identify and drive opportunities to improve training, procedures, mechanisms, and tooling. A successful candidate will have a consulting aptitude, strong ownership, passion for hardware and operational troubleshooting, customer-facing skills, and a desire to work within an elite group at the leading edge of technology across Amazon's European operations. Core Job Responsibilities: * Enable local site maintenance technicians to effectively maintain advanced technology systems by creating and maintaining maintenance procedural and troubleshooting documentation * Serve as the escalation point for local site maintenance technicians when complex system issues impacting machine performance or availability arise * Monitor system performance across the EU region and utilize system KPIs and technician feedback to identify and lead continuous improvement initiatives * Provide on-site support for new product implementations, upgrades, routine hardware audits, and troubleshooting for advanced robotics systems * Develop and implement a process for ensuring spare part availability across the EU region for the systems you support * Produce regular reports on the safety, reliability, and performance of the products that you support * Identify and drive projects to improve the availability, quality, or maintainability of robotics equipment. * Provide on call after-hours support for high severity events related to products that you support * 50%-75% travel expected in UK/EU/NA Basic Qualifications * BS in Engineering (Mechanical, Electrical, Industrial, or related field) * 3+ years of experience designing, deploying, or supporting mechatronic or robotic systems * Knowledge and/or working experience with statistical analysis tools, data visualization, and program management * Experience leading disciplined technical problem-solving * Experience with 8D, 5-Why, Fishbone, FMEA, or comparable root cause analysis methodologies * Excellent communication skills with the ability to articulate complex technical issues * Ability to manage multiple high-priority tasks simultaneously Preferred Qualifications * MS in Engineering (Mechanical, Electrical, Industrial, or related field) * Knowledge and or working experience in dealing with big data * Familiarity with PLC programming * Familiarity with industry standard CAD & FEA design tools, industry trends, and design for supportability * Experience creating and implementing scalable standard operating procedures, performance metrics, and feedback mechanisms * Experience managing new hardware implementation projects Project Manager - ITALY - TURIN - 9 months - Manufacturing, Robotics, Mechatronics - Production - Hardware Support Engineering (HSE) - Packaging
Project Manager - ITALY - TURIN - 9 months - Manufacturing, Robotics, Mechatronics - Production - Hardware Support Engineering (HSE) - Packaging We are seeking exceptional candidates who possess a blend of technical and customer-facing skills to successfully support Mechatronics & Sustainable Packaging (MSP) packing machines. Hardware Support Engineers (HSEs) are responsible for engineering support of on-site maintaining MSP technologies in Europe. The HSE will partner with global engineering and support experts to tailor global best practices to European robotics applications including technology or vendor differences and local requirements. The MSP will provide technical expertise and guidance to sites through: providing technical expertise and coaching on preventative maintenance and troubleshooting, monitoring performance and compliance, deep diving issues and supporting corrective actions, creating processes and mechanism to improve performance, and supporting site launch and ramp-up. HSE will consolidate VOC feedback to identify and drive opportunities to improve training, procedures, mechanisms, and tooling. A successful candidate will have a consulting aptitude, strong ownership, passion for hardware and operational troubleshooting, customer-facing skills, and a desire to work within an elite group at the leading edge of technology across Amazon's European operations. Core Job Responsibilities: * Enable local site maintenance technicians to effectively maintain advanced technology systems by creating and maintaining maintenance procedural and troubleshooting documentation * Serve as the escalation point for local site maintenance technicians when complex system issues impacting machine performance or availability arise * Monitor system performance across the EU region and utilize system KPIs and technician feedback to identify and lead continuous improvement initiatives * Provide on-site support for new product implementations, upgrades, routine hardware audits, and troubleshooting for advanced robotics systems * Develop and implement a process for ensuring spare part availability across the EU region for the systems you support * Produce regular reports on the safety, reliability, and performance of the products that you support * Identify and drive projects to improve the availability, quality, or maintainability of robotics equipment. * Provide on call after-hours support for high severity events related to products that you support * 50%-75% travel expected in UK/EU/NA Basic Qualifications * BS in Engineering (Mechanical, Electrical, Industrial, or related field) * 3+ years of experience designing, deploying, or supporting mechatronic or robotic systems * Knowledge and/or working experience with statistical analysis tools, data visualization, and program management * Experience leading disciplined technical problem-solving * Experience with 8D, 5-Why, Fishbone, FMEA, or comparable root cause analysis methodologies * Excellent communication skills with the ability to articulate complex technical issues * Ability to manage multiple high-priority tasks simultaneously Preferred Qualifications * MS in Engineering (Mechanical, Electrical, Industrial, or related field) * Knowledge and or working experience in dealing with big data * Familiarity with PLC programming * Familiarity with industry standard CAD & FEA design tools, industry trends, and design for supportability * Experience creating and implementing scalable standard operating procedures, performance metrics, and feedback mechanisms * Experience managing new hardware implementation projects Project Manager - ITALY - TURIN - 9 months - Manufacturing, Robotics, Mechatronics - Production - Hardware Support Engineering (HSE) - Packaging
26/09/2023
Project-based
Project Manager - ITALY - TURIN - 9 months - Manufacturing, Robotics, Mechatronics - Production - Hardware Support Engineering (HSE) - Packaging We are seeking exceptional candidates who possess a blend of technical and customer-facing skills to successfully support Mechatronics & Sustainable Packaging (MSP) packing machines. Hardware Support Engineers (HSEs) are responsible for engineering support of on-site maintaining MSP technologies in Europe. The HSE will partner with global engineering and support experts to tailor global best practices to European robotics applications including technology or vendor differences and local requirements. The MSP will provide technical expertise and guidance to sites through: providing technical expertise and coaching on preventative maintenance and troubleshooting, monitoring performance and compliance, deep diving issues and supporting corrective actions, creating processes and mechanism to improve performance, and supporting site launch and ramp-up. HSE will consolidate VOC feedback to identify and drive opportunities to improve training, procedures, mechanisms, and tooling. A successful candidate will have a consulting aptitude, strong ownership, passion for hardware and operational troubleshooting, customer-facing skills, and a desire to work within an elite group at the leading edge of technology across Amazon's European operations. Core Job Responsibilities: * Enable local site maintenance technicians to effectively maintain advanced technology systems by creating and maintaining maintenance procedural and troubleshooting documentation * Serve as the escalation point for local site maintenance technicians when complex system issues impacting machine performance or availability arise * Monitor system performance across the EU region and utilize system KPIs and technician feedback to identify and lead continuous improvement initiatives * Provide on-site support for new product implementations, upgrades, routine hardware audits, and troubleshooting for advanced robotics systems * Develop and implement a process for ensuring spare part availability across the EU region for the systems you support * Produce regular reports on the safety, reliability, and performance of the products that you support * Identify and drive projects to improve the availability, quality, or maintainability of robotics equipment. * Provide on call after-hours support for high severity events related to products that you support * 50%-75% travel expected in UK/EU/NA Basic Qualifications * BS in Engineering (Mechanical, Electrical, Industrial, or related field) * 3+ years of experience designing, deploying, or supporting mechatronic or robotic systems * Knowledge and/or working experience with statistical analysis tools, data visualization, and program management * Experience leading disciplined technical problem-solving * Experience with 8D, 5-Why, Fishbone, FMEA, or comparable root cause analysis methodologies * Excellent communication skills with the ability to articulate complex technical issues * Ability to manage multiple high-priority tasks simultaneously Preferred Qualifications * MS in Engineering (Mechanical, Electrical, Industrial, or related field) * Knowledge and or working experience in dealing with big data * Familiarity with PLC programming * Familiarity with industry standard CAD & FEA design tools, industry trends, and design for supportability * Experience creating and implementing scalable standard operating procedures, performance metrics, and feedback mechanisms * Experience managing new hardware implementation projects Project Manager - ITALY - TURIN - 9 months - Manufacturing, Robotics, Mechatronics - Production - Hardware Support Engineering (HSE) - Packaging
Systems Engineer required for long term contract assifnment based in Bristol The role is within the Weapon Systems Design & Verification team, supporting the sustainment and improvement of the weapon system architecture. This will involve resolving technical queries, managing subsystem architecture and definition, and verification and validation activities. The role involves working closely with multiple stakeholders (both internally and externally). Depending on the candidate, this role could also include the management of System Engineering work packages. Key Individual responsibilities may include: * Management of System and sub-system level requirements and interface definition, including management of design baselines; * System architecture definition; * Management and resolution of Problems and Queries that arise from development & qualification activity * Understanding the impact of proposed changes on the current design/performing trade studies to de-risk the system design and ensure the continued viability of the product; * Supporting coordination of key Design Reviews; * Generation and review of technical documentation to support verification activity; * System level compliance evidence compilation; * System certification and generation of System verification documentation (eg Design Verification Plans, and Requirement Verification Modules); * Systems support to other parallel programmes as required. Experience/Knowledge/Ability Requirements * An appreciation of the Systems Engineering life cycle and processes, including requirement elicitation and interface definition, identifying and managing key design drivers, modification development and formal verification and certification processes; * Experience in Systems integration (mechanical/electrical/software) would be beneficial; * An ability to produce concise, coherent and detailed technical reports of a high quality; * An ability to work proactively and flexibly across a number of variant programmes for which relative priorities can change quickly; * An effective team player with strong interpersonal and influencing skills, essential to working as part of a multi-disciplinary team and in building cohesion in the relationships between the Systems team and various interfacing teams; * An awareness of RTC & DOORS would be beneficial. Key Technical competencies: * Proven career experience of Systems Engineering (good understanding of CADMID & V-life cycles) * Strong technical competency - proven experience in understanding and resolving technical issues & communicating technical detail at the level appropriate for the audience Key candidate characteristics: * Flexibility to react to changing priorities and managing conflicting demands * Work with a degree of autonomy and pro-active by nature Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
26/09/2023
Project-based
Systems Engineer required for long term contract assifnment based in Bristol The role is within the Weapon Systems Design & Verification team, supporting the sustainment and improvement of the weapon system architecture. This will involve resolving technical queries, managing subsystem architecture and definition, and verification and validation activities. The role involves working closely with multiple stakeholders (both internally and externally). Depending on the candidate, this role could also include the management of System Engineering work packages. Key Individual responsibilities may include: * Management of System and sub-system level requirements and interface definition, including management of design baselines; * System architecture definition; * Management and resolution of Problems and Queries that arise from development & qualification activity * Understanding the impact of proposed changes on the current design/performing trade studies to de-risk the system design and ensure the continued viability of the product; * Supporting coordination of key Design Reviews; * Generation and review of technical documentation to support verification activity; * System level compliance evidence compilation; * System certification and generation of System verification documentation (eg Design Verification Plans, and Requirement Verification Modules); * Systems support to other parallel programmes as required. Experience/Knowledge/Ability Requirements * An appreciation of the Systems Engineering life cycle and processes, including requirement elicitation and interface definition, identifying and managing key design drivers, modification development and formal verification and certification processes; * Experience in Systems integration (mechanical/electrical/software) would be beneficial; * An ability to produce concise, coherent and detailed technical reports of a high quality; * An ability to work proactively and flexibly across a number of variant programmes for which relative priorities can change quickly; * An effective team player with strong interpersonal and influencing skills, essential to working as part of a multi-disciplinary team and in building cohesion in the relationships between the Systems team and various interfacing teams; * An awareness of RTC & DOORS would be beneficial. Key Technical competencies: * Proven career experience of Systems Engineering (good understanding of CADMID & V-life cycles) * Strong technical competency - proven experience in understanding and resolving technical issues & communicating technical detail at the level appropriate for the audience Key candidate characteristics: * Flexibility to react to changing priorities and managing conflicting demands * Work with a degree of autonomy and pro-active by nature Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Missile Mechanical Architect Stevenage SC required before starting. 6 months - Likely to be Extended Full Time - Current working situation Dependent on experience and skills. At least 1-2 days a week possibly in lab up to 3 in first weeks Minimal travel between sites. - Potential for international travel to France Up To £60 Per Hour Pay To Umbrella Company Overview of department: We have an opportunity for an experienced Mechanical Architect to join our team here at MBDA. This exciting role is to gather and manage the missile mechanical architecture requirements to achieve missile performance, on time and on cost and overall layout vs compliance. This involves providing justification of the design and co-ordinate the verification evidence of missile performance to support certification. Responsibilities: The role is responsible for the delivery of the missile mechanical architecture requirements and typical responsibilities include: Establishing the Missile Airframe Task Requirements Specification (TRS) to ensure a structured & coherent mechanical response to the overall Missile TRS Management of the mechanical interface with the launcher Management of Mechanical & Thermal Interfaces across the Missile Defining the optimum mechanical architecture for all variants of the missile, ensuring the mechanical architecture and interfaces meet requirements Implementation of GMA Policies to ensure Modularity & Reuse objectives are achieved Development of the overall proving logic for the validation of the Airframe Ensuring mechanical compliance to the Airframe TRS for missile certificate of design Interface with and manage customer expectations throughout the development process Producing Statements of Work and plans for activities within their sphere of responsibility Direct technical supervision of engineers within their team and indirect management of engineers in the extended project team Controlling assigned budgets, managing personal workload and identifying any further resource needs Skillset/experience required: Who and what we are looking for from you? Educated to degree level with 10 years' experience or an equivalent qualification having obtained significant experience of mechanical engineering Ability to technically manage internal & sub-contract activities Strong leadership skills, able to establish a clear engineering vision Good knowledge & experience of missile mechanical design, including: - Static & Dynamic Analysis - Design for Environment - Thermal Management Good understanding of broader engineering disciplines, including: - Aerodynamics - Testability - Production Experience developing proving logic and managing the generation of compliance evidence towards Certificates of Design Experience across the full Product Life Cycle Ability to influence senior managers and other stakeholders Strong interpersonal and well developed communication skills (written & verbal) Willingness to travel within UK and Europe
26/09/2023
Project-based
Missile Mechanical Architect Stevenage SC required before starting. 6 months - Likely to be Extended Full Time - Current working situation Dependent on experience and skills. At least 1-2 days a week possibly in lab up to 3 in first weeks Minimal travel between sites. - Potential for international travel to France Up To £60 Per Hour Pay To Umbrella Company Overview of department: We have an opportunity for an experienced Mechanical Architect to join our team here at MBDA. This exciting role is to gather and manage the missile mechanical architecture requirements to achieve missile performance, on time and on cost and overall layout vs compliance. This involves providing justification of the design and co-ordinate the verification evidence of missile performance to support certification. Responsibilities: The role is responsible for the delivery of the missile mechanical architecture requirements and typical responsibilities include: Establishing the Missile Airframe Task Requirements Specification (TRS) to ensure a structured & coherent mechanical response to the overall Missile TRS Management of the mechanical interface with the launcher Management of Mechanical & Thermal Interfaces across the Missile Defining the optimum mechanical architecture for all variants of the missile, ensuring the mechanical architecture and interfaces meet requirements Implementation of GMA Policies to ensure Modularity & Reuse objectives are achieved Development of the overall proving logic for the validation of the Airframe Ensuring mechanical compliance to the Airframe TRS for missile certificate of design Interface with and manage customer expectations throughout the development process Producing Statements of Work and plans for activities within their sphere of responsibility Direct technical supervision of engineers within their team and indirect management of engineers in the extended project team Controlling assigned budgets, managing personal workload and identifying any further resource needs Skillset/experience required: Who and what we are looking for from you? Educated to degree level with 10 years' experience or an equivalent qualification having obtained significant experience of mechanical engineering Ability to technically manage internal & sub-contract activities Strong leadership skills, able to establish a clear engineering vision Good knowledge & experience of missile mechanical design, including: - Static & Dynamic Analysis - Design for Environment - Thermal Management Good understanding of broader engineering disciplines, including: - Aerodynamics - Testability - Production Experience developing proving logic and managing the generation of compliance evidence towards Certificates of Design Experience across the full Product Life Cycle Ability to influence senior managers and other stakeholders Strong interpersonal and well developed communication skills (written & verbal) Willingness to travel within UK and Europe
