Working in the given territory of Ireland to service a product range that includes skinning, derinding and slicing machines. This role also includes international travel to support the main factory in servicing and installing the range of machines. This work will be planned in advance to gain a proficient understanding of the specified Product Ranges and their associated ancillary products both in terms of Product & Technical Knowledge and the relevant skills needed to install, commission and service the range. SUMMARY OF MAIN RESPONSIBILITIES Reporting directly to the General Manager-initially on your in-depth training program, subsequently working to an agreed service target. Responsible for installation, commissioning and servicing of our specified product ranges. Daily reporting on service schedules would then revert to reporting to the service manager in the UK. This role also requires close customer contact and visiting on a monthly basis to check that the machines are providing the cost savings and productivity that the customer requires. SPECIFIC RESPONSIBILITIES. . Primary objective is to install, commission and service to OEM standards. To achieve, then exceed your budget target, agreed with your sales manager after you have completed your training program, on chargeable hours. . To produce training courses for our customers to be given in-house or at our customer's premises on the product range. . To train up operatives, cleaning and maintenance staff of our customers to a high level on all product groups. To provide service contracts to our customer base either monthly or quarterly. . To create a professional interface with our customers for all aspects relevant to Capital Service and the rest of the business. . To forge good and effective working relationships with all departments and personnel, to assist with your role. . To communicate at least daily (initially far more often) but whenever necessary with the General/Service Manager to update progress, resolve problems and feedback information. . To be Self Motivated and Self Organised so that after training you are able to work without direct supervision. . To fully understand and work to the companies policies and procedures and be aware of the employee handbook guidelines, ensuring each procedure is acknowledged and carried out to its requirements. . To ensure all leads are acted upon without delay and followed through to their conclusion, including recording/reporting of the outcome. This is currently being produced on a Technical and sales CRM software package which you will be fully trained in the use of. . To ensure all customer communication is timely, accurate and projects a professional image whilst remaining within Company policies. . To be competent using Word, Outlook, PowerPoint and Excel, being able to input, extract and interpret relevant information from these systems to enable you to fulfil your role. . Initially in conjunction with the General Manager, but after training under your own initiative to plan the most cost effective routing around your territory in the securing of the budget and all other aspects of the job. . To maintain at all times accurate, realistic and up to date Prospect Lists for your range of products, reporting these to your managers as required. . To be flexible in your approach to ensure that the department and business needs of the Company are met. This may require you assisting other departments and working outside of your contracted hours, including weekends. . To be called upon to support our direct offices (USA, Italy, Russia) and the other 50 distributors around the World for planned service work and installations of machines. APPLICANT REQUIREMENTS. To have some experience in field service environment. Mechanical engineering background knowledge of electrical engineering. Software/PLC knowledge is an advantage. To have some experience in the meat/fish/poultry or food industry on service equipment To be able to work away from home on a regular basis (4 nights a week). To be able to work anti-social and long hours. To be flexible in the approach. To be a "go-getter" and have a winning mentality To have a full clean UK or Irish driving licence. To have an up to date UK or Irish Passport. To be able to travel at short notice to customers plants or suppliers in Europe To be able to work weekends when required. Salary and Benefits. Starting salary of 50,000.00. KPI bonus in first year €5,000.00. Fully expensed service van (currently VW Transporter). 20 days holiday plus bank holidays in Ireland. Overtime payments outside of normal working hours -x1.5 Monday-Friday after 20.00 and x2.0 for any weekend or bank holiday work. Additional bonus payments for travel outside of the UK and Ireland for planned service/installation work for Grasselli S.p.A. Laptop and mobile phone. Company card for out of pocket expenses
07/12/2023
Full time
Working in the given territory of Ireland to service a product range that includes skinning, derinding and slicing machines. This role also includes international travel to support the main factory in servicing and installing the range of machines. This work will be planned in advance to gain a proficient understanding of the specified Product Ranges and their associated ancillary products both in terms of Product & Technical Knowledge and the relevant skills needed to install, commission and service the range. SUMMARY OF MAIN RESPONSIBILITIES Reporting directly to the General Manager-initially on your in-depth training program, subsequently working to an agreed service target. Responsible for installation, commissioning and servicing of our specified product ranges. Daily reporting on service schedules would then revert to reporting to the service manager in the UK. This role also requires close customer contact and visiting on a monthly basis to check that the machines are providing the cost savings and productivity that the customer requires. SPECIFIC RESPONSIBILITIES. . Primary objective is to install, commission and service to OEM standards. To achieve, then exceed your budget target, agreed with your sales manager after you have completed your training program, on chargeable hours. . To produce training courses for our customers to be given in-house or at our customer's premises on the product range. . To train up operatives, cleaning and maintenance staff of our customers to a high level on all product groups. To provide service contracts to our customer base either monthly or quarterly. . To create a professional interface with our customers for all aspects relevant to Capital Service and the rest of the business. . To forge good and effective working relationships with all departments and personnel, to assist with your role. . To communicate at least daily (initially far more often) but whenever necessary with the General/Service Manager to update progress, resolve problems and feedback information. . To be Self Motivated and Self Organised so that after training you are able to work without direct supervision. . To fully understand and work to the companies policies and procedures and be aware of the employee handbook guidelines, ensuring each procedure is acknowledged and carried out to its requirements. . To ensure all leads are acted upon without delay and followed through to their conclusion, including recording/reporting of the outcome. This is currently being produced on a Technical and sales CRM software package which you will be fully trained in the use of. . To ensure all customer communication is timely, accurate and projects a professional image whilst remaining within Company policies. . To be competent using Word, Outlook, PowerPoint and Excel, being able to input, extract and interpret relevant information from these systems to enable you to fulfil your role. . Initially in conjunction with the General Manager, but after training under your own initiative to plan the most cost effective routing around your territory in the securing of the budget and all other aspects of the job. . To maintain at all times accurate, realistic and up to date Prospect Lists for your range of products, reporting these to your managers as required. . To be flexible in your approach to ensure that the department and business needs of the Company are met. This may require you assisting other departments and working outside of your contracted hours, including weekends. . To be called upon to support our direct offices (USA, Italy, Russia) and the other 50 distributors around the World for planned service work and installations of machines. APPLICANT REQUIREMENTS. To have some experience in field service environment. Mechanical engineering background knowledge of electrical engineering. Software/PLC knowledge is an advantage. To have some experience in the meat/fish/poultry or food industry on service equipment To be able to work away from home on a regular basis (4 nights a week). To be able to work anti-social and long hours. To be flexible in the approach. To be a "go-getter" and have a winning mentality To have a full clean UK or Irish driving licence. To have an up to date UK or Irish Passport. To be able to travel at short notice to customers plants or suppliers in Europe To be able to work weekends when required. Salary and Benefits. Starting salary of 50,000.00. KPI bonus in first year €5,000.00. Fully expensed service van (currently VW Transporter). 20 days holiday plus bank holidays in Ireland. Overtime payments outside of normal working hours -x1.5 Monday-Friday after 20.00 and x2.0 for any weekend or bank holiday work. Additional bonus payments for travel outside of the UK and Ireland for planned service/installation work for Grasselli S.p.A. Laptop and mobile phone. Company card for out of pocket expenses
Job title: Electrical Designer/Engineer Location: Warrington or Westlakes Job type: 12 months initially- with possible extension Pay rate: Up to £55.00 per hour inside IR35 Shift Timings: 3 days site/2 days remote Hello, iO Associates is looking for an Electrical Designer/Engineer to work with a company that has a comprehensive range of critical nuclear solutions across the markets of Clean Energy, Defence, and Civil Decommissioning, both in the UK and internationally. Required: Require candidates with a minimum of three years in the last five, where engineering knowledge is indispensable. Specifically seek at least one year of experience within the past three years in a nuclear or regulated system, emphasizing reliance on professional engineering judgment and design. Responsibilities: Expert in electrical and control system design for diverse projects. Proficient in producing block cable diagrams, single-line diagrams, and termination drawings. Skilled in control system sequence drawings, general arrangements, and panel designs. Specialized in ensuring electrical safety mechanisms compliance through the production of 61508 Suite drawings. This is a hybrid role with visits to the site. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth and career development throughout the organization. Please apply on the link below or contact us if you want to know more about the role and company.
07/12/2023
Project-based
Job title: Electrical Designer/Engineer Location: Warrington or Westlakes Job type: 12 months initially- with possible extension Pay rate: Up to £55.00 per hour inside IR35 Shift Timings: 3 days site/2 days remote Hello, iO Associates is looking for an Electrical Designer/Engineer to work with a company that has a comprehensive range of critical nuclear solutions across the markets of Clean Energy, Defence, and Civil Decommissioning, both in the UK and internationally. Required: Require candidates with a minimum of three years in the last five, where engineering knowledge is indispensable. Specifically seek at least one year of experience within the past three years in a nuclear or regulated system, emphasizing reliance on professional engineering judgment and design. Responsibilities: Expert in electrical and control system design for diverse projects. Proficient in producing block cable diagrams, single-line diagrams, and termination drawings. Skilled in control system sequence drawings, general arrangements, and panel designs. Specialized in ensuring electrical safety mechanisms compliance through the production of 61508 Suite drawings. This is a hybrid role with visits to the site. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth and career development throughout the organization. Please apply on the link below or contact us if you want to know more about the role and company.
The Company We are a company that specialises in identifying and providing the best system solutions for our clients' operations, including installation, calibration, service, and lifetime support. Our team of experienced engineers is qualified to the appropriate standards and can be cleared to work within all UK nuclear facilities. Alongside our own products, we also offer comprehensive repair and calibration services for virtually all radiometric contamination and clearance systems available on the market, regardless of the specific brand. We also offer a range of upgrade packages to remove product obsolescence issues and provide state-of-the-art detection limits and performance. Our engineers are located throughout the UK, and we offer prompt breakdown and callout services. The Role As an integral member of Ludlum Systems, you will lead the completion of planned maintenance, repairs, and installations of advanced instrumentation across a wide range of sites in the UK. Your role extends beyond technical expertise to providing invaluable support to Ludlum Systems staff as directed by the Service Manager. Key Responsibilities: Operational Excellence: Master a broad portfolio of instruments, offering both reactive and preventative maintenance support, including Waste Monitors, Contamination or Clearance Monitors, Vehicle Monitors, Area Gamma Alarms, Counting Systems, and associated computer and control systems. Align service delivery with Ludlum Systems' business plan, ensuring the completion of all scheduled works to surpass customer expectations and meet KPIs. Exemplify customer service excellence, nurturing relationships and ensuring repeat business through effective upselling and swift, professional resolution of customer concerns or complaints. Provide essential support to Sales and Project teams, contributing to Ludlum Systems' longer-term projects, such as system installation, testing, evaluation, and commissioning. Project Management and Documentation: Develop and maintain comprehensive documentation for all systems, ensuring proper archiving and adherence to regulatory requirements. Establish working procedures to guarantee consistently high-quality system implementation and support. Assume ownership of reported issues, driving them to conclusion or appropriate escalation. Safety and Security: Demonstrate a deep understanding of safety responsibilities outlined in the company safety manual and customer safety documents. Comply with local driving regulations at a high standard to minimise incidents and accidents. Promote a safe working environment and promptly report safety occurrences or system failures. Key Performance Indicators: Ensure the delivery of operational key performance indicators defined by your Manager. Financial Awareness: Be cost-aware, striving to consistently provide value. Stakeholder Relationship Management: Interface positively with internal and external stakeholders, actively promoting Ludlum Systems and its parent organisation. Additional Information: Flexibility is key, as individuals may be required to carry out additional duties based on business needs. Maximum operational efficiency requires adaptability, and individuals may be called upon to assist in various areas. Initial Requirements: Ideally, HND educated in Electrical and Electrical Engineering or an equivalent. Full UK Driving License is a prerequisite. UK National with the ability to hold SC Clearance. Understanding of overnight stays away from home, occasional planned weekend work, and overseas travel. Ability to work independently and collaboratively within a team. Electrical awareness and practical skills. Advantageous practical skills include experience with Microsoft Client Operating Systems, exposure to Linux and SQL Databases, PLC Programming, cable termination, low voltage wiring, and fault isolation & resolution. Physics A Level or higher. Minimum 5-year Service and Support background or 3-year nuclear engineering background. Experience in using IT and Business Application systems in association with service provision. Join Ludlum Systems and be a part of a dynamic team driving innovation in the field of instrumentation and electrical maintenance. Your role is crucial in maintaining operational excellence and fostering positive customer relationships.
07/12/2023
Full time
The Company We are a company that specialises in identifying and providing the best system solutions for our clients' operations, including installation, calibration, service, and lifetime support. Our team of experienced engineers is qualified to the appropriate standards and can be cleared to work within all UK nuclear facilities. Alongside our own products, we also offer comprehensive repair and calibration services for virtually all radiometric contamination and clearance systems available on the market, regardless of the specific brand. We also offer a range of upgrade packages to remove product obsolescence issues and provide state-of-the-art detection limits and performance. Our engineers are located throughout the UK, and we offer prompt breakdown and callout services. The Role As an integral member of Ludlum Systems, you will lead the completion of planned maintenance, repairs, and installations of advanced instrumentation across a wide range of sites in the UK. Your role extends beyond technical expertise to providing invaluable support to Ludlum Systems staff as directed by the Service Manager. Key Responsibilities: Operational Excellence: Master a broad portfolio of instruments, offering both reactive and preventative maintenance support, including Waste Monitors, Contamination or Clearance Monitors, Vehicle Monitors, Area Gamma Alarms, Counting Systems, and associated computer and control systems. Align service delivery with Ludlum Systems' business plan, ensuring the completion of all scheduled works to surpass customer expectations and meet KPIs. Exemplify customer service excellence, nurturing relationships and ensuring repeat business through effective upselling and swift, professional resolution of customer concerns or complaints. Provide essential support to Sales and Project teams, contributing to Ludlum Systems' longer-term projects, such as system installation, testing, evaluation, and commissioning. Project Management and Documentation: Develop and maintain comprehensive documentation for all systems, ensuring proper archiving and adherence to regulatory requirements. Establish working procedures to guarantee consistently high-quality system implementation and support. Assume ownership of reported issues, driving them to conclusion or appropriate escalation. Safety and Security: Demonstrate a deep understanding of safety responsibilities outlined in the company safety manual and customer safety documents. Comply with local driving regulations at a high standard to minimise incidents and accidents. Promote a safe working environment and promptly report safety occurrences or system failures. Key Performance Indicators: Ensure the delivery of operational key performance indicators defined by your Manager. Financial Awareness: Be cost-aware, striving to consistently provide value. Stakeholder Relationship Management: Interface positively with internal and external stakeholders, actively promoting Ludlum Systems and its parent organisation. Additional Information: Flexibility is key, as individuals may be required to carry out additional duties based on business needs. Maximum operational efficiency requires adaptability, and individuals may be called upon to assist in various areas. Initial Requirements: Ideally, HND educated in Electrical and Electrical Engineering or an equivalent. Full UK Driving License is a prerequisite. UK National with the ability to hold SC Clearance. Understanding of overnight stays away from home, occasional planned weekend work, and overseas travel. Ability to work independently and collaboratively within a team. Electrical awareness and practical skills. Advantageous practical skills include experience with Microsoft Client Operating Systems, exposure to Linux and SQL Databases, PLC Programming, cable termination, low voltage wiring, and fault isolation & resolution. Physics A Level or higher. Minimum 5-year Service and Support background or 3-year nuclear engineering background. Experience in using IT and Business Application systems in association with service provision. Join Ludlum Systems and be a part of a dynamic team driving innovation in the field of instrumentation and electrical maintenance. Your role is crucial in maintaining operational excellence and fostering positive customer relationships.
Unleash Your Creativity and Join a Dynamic Team at a Cutting-Edge Technology Company Are you a highly motivated and creative individual with a passion for engineering and problem-solving? Do you thrive in a fast-paced, dynamic environment where your ideas are valued and your expertise is recognized? If so, then we have an exciting opportunity for you to join our team and make a real difference in the world of precision machinery. As an Automation Engineer at a cutting-edge technology company, you will play a pivotal role in designing, developing, and testing their innovative machine tools. You will be responsible for proposing solutions that meet specifications while optimizing costs and deadlines. You will also be involved in the configuration, commissioning, and maintenance of our machines, ensuring that they meet the highest standards of performance and reliability. Here are just a few of the responsibilities you will have: Design and develop electrical diagrams for our machines using the E-Plan tool. Program Fanuc PLCs (Ladder, MacroExec. Code ISO) to control our machines. Tune and calibrate axes, including both closed-loop servos and open-loop systems. Develop, support, test, and improve our products based on your expertise in mechanics, electronics, hydraulics, and pneumatics. Establish references: diagrams, parts lists, checklists, and documentation, ensuring clear communication and documentation of your work. To be successful in this role, you should have: HES/EPF engineer or equivalent training, or successful professional experience in the machine tool field. Expertise in machine standards, FMEAs, and standardization. Experience in machine tool development and configuration. Excellent communication skills in French and English (written and oral, level B2). In return for your dedication and expertise, we offer: A dynamic and challenging work environment where you can make a real impact. The opportunity to work with cutting-edge technology and develop innovative solutions. A competitive salary and benefits package. The chance to learn and grow in your career. If you are a creative and passionate individual who is ready to take on new challenges and make a difference in the world of precision machinery, then we encourage you to apply for this exciting opportunity. Darwin Recruitment AG is a Zurich based, SECO licensed, privately owned subsidiary of Darwin Professional Staffing Group Ltd (a Global IT Recruitment Consultancy). Darwin Recruitment AG manages client relationships whilst also utilising Darwin Professional Staffing Group databases and networks to source Candidates and fulfil client requests. We do not ask for a placement fee from Candidates/Employees. If you wish to contact a specialist regarding this role, please contact
07/12/2023
Full time
Unleash Your Creativity and Join a Dynamic Team at a Cutting-Edge Technology Company Are you a highly motivated and creative individual with a passion for engineering and problem-solving? Do you thrive in a fast-paced, dynamic environment where your ideas are valued and your expertise is recognized? If so, then we have an exciting opportunity for you to join our team and make a real difference in the world of precision machinery. As an Automation Engineer at a cutting-edge technology company, you will play a pivotal role in designing, developing, and testing their innovative machine tools. You will be responsible for proposing solutions that meet specifications while optimizing costs and deadlines. You will also be involved in the configuration, commissioning, and maintenance of our machines, ensuring that they meet the highest standards of performance and reliability. Here are just a few of the responsibilities you will have: Design and develop electrical diagrams for our machines using the E-Plan tool. Program Fanuc PLCs (Ladder, MacroExec. Code ISO) to control our machines. Tune and calibrate axes, including both closed-loop servos and open-loop systems. Develop, support, test, and improve our products based on your expertise in mechanics, electronics, hydraulics, and pneumatics. Establish references: diagrams, parts lists, checklists, and documentation, ensuring clear communication and documentation of your work. To be successful in this role, you should have: HES/EPF engineer or equivalent training, or successful professional experience in the machine tool field. Expertise in machine standards, FMEAs, and standardization. Experience in machine tool development and configuration. Excellent communication skills in French and English (written and oral, level B2). In return for your dedication and expertise, we offer: A dynamic and challenging work environment where you can make a real impact. The opportunity to work with cutting-edge technology and develop innovative solutions. A competitive salary and benefits package. The chance to learn and grow in your career. If you are a creative and passionate individual who is ready to take on new challenges and make a difference in the world of precision machinery, then we encourage you to apply for this exciting opportunity. Darwin Recruitment AG is a Zurich based, SECO licensed, privately owned subsidiary of Darwin Professional Staffing Group Ltd (a Global IT Recruitment Consultancy). Darwin Recruitment AG manages client relationships whilst also utilising Darwin Professional Staffing Group databases and networks to source Candidates and fulfil client requests. We do not ask for a placement fee from Candidates/Employees. If you wish to contact a specialist regarding this role, please contact
Our client in UK are seeking an experienced PLC Programmer & Controls Engineer Role and Responsibilities: Project/Design Work - PLC logic programming using ladder logic in various PLC ranges, with a focus on Siemens and Allen Bradley systems. Design of Electrical Motor starter panels using CAD software, including the creation of comprehensive schematic wiring diagrams, panel parts lists, and panel internal and external layouts. Graphic programming of HMI interfaces. Commissioning of control systems both internally and on customer sites. Assist in general sales-related tasks as required by the department manager. This may include job pricing, costing, and specifications for quoting purposes. Skills and experience Required: Proficient in code writing for Allen Bradley and Siemens PLCs PLC ladder log experience is essential Have the right to work in the UK permanently Previous experience in industrial control system design. Knowledge of Process and Engineering (preferred but not essential). Proficient in using Microsoft Office tools such as Word, Excel, PowerPoint, and Outlook. Note: This is a full-time, office-based position that may require occasional travel to customer sites and other locations.
05/12/2023
Full time
Our client in UK are seeking an experienced PLC Programmer & Controls Engineer Role and Responsibilities: Project/Design Work - PLC logic programming using ladder logic in various PLC ranges, with a focus on Siemens and Allen Bradley systems. Design of Electrical Motor starter panels using CAD software, including the creation of comprehensive schematic wiring diagrams, panel parts lists, and panel internal and external layouts. Graphic programming of HMI interfaces. Commissioning of control systems both internally and on customer sites. Assist in general sales-related tasks as required by the department manager. This may include job pricing, costing, and specifications for quoting purposes. Skills and experience Required: Proficient in code writing for Allen Bradley and Siemens PLCs PLC ladder log experience is essential Have the right to work in the UK permanently Previous experience in industrial control system design. Knowledge of Process and Engineering (preferred but not essential). Proficient in using Microsoft Office tools such as Word, Excel, PowerPoint, and Outlook. Note: This is a full-time, office-based position that may require occasional travel to customer sites and other locations.
Site Manager (Nuclear) - Inside IR35 - SC Cleared VIQU has partnered with a leading consultancy who specialise in operational technology and digital transformation. They optimize efficiency on a massive scale, with continuous innovation driving their future-focused approach. Operating in highly regulated industrial environments, they deliver critical projects in energy, water, renewables, and manufacturing. Our client is recruiting for a Site Manager with a background in Electrical Engineering to oversee the delivery of nuclear solutions on their clients' sites. Please note that this is a field-based role and the successful candidate will be required to travel and work away from home. Key skills & responsibilities for the Site Manager: Strong experience as a Site Manager within nuclear Background in electrical engineering & ability to support electrical installation/test/commissioning activities Hold a valid Safety Passport Awareness of NEC3/4 contracts Nominated point of contact for Health & Safety, First Aid. Relevant certifications required. CDM Training relevant to site Regular reporting & client liaison Good people management skills - staff & subcontractors Willing to travel & work away at customer sites. Full UK driving license SC Clearance Role details: Job role: Site Manager (nuclear) Job type: Contract Duration: 6 months' initial contract with view to extend Rate: £400 - 450 per day IR35 status: Inside IR35 Location: Field based - Chester to begin with To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Suzie Stone , by exploring the VIQU IT Recruitment website .
05/12/2023
Project-based
Site Manager (Nuclear) - Inside IR35 - SC Cleared VIQU has partnered with a leading consultancy who specialise in operational technology and digital transformation. They optimize efficiency on a massive scale, with continuous innovation driving their future-focused approach. Operating in highly regulated industrial environments, they deliver critical projects in energy, water, renewables, and manufacturing. Our client is recruiting for a Site Manager with a background in Electrical Engineering to oversee the delivery of nuclear solutions on their clients' sites. Please note that this is a field-based role and the successful candidate will be required to travel and work away from home. Key skills & responsibilities for the Site Manager: Strong experience as a Site Manager within nuclear Background in electrical engineering & ability to support electrical installation/test/commissioning activities Hold a valid Safety Passport Awareness of NEC3/4 contracts Nominated point of contact for Health & Safety, First Aid. Relevant certifications required. CDM Training relevant to site Regular reporting & client liaison Good people management skills - staff & subcontractors Willing to travel & work away at customer sites. Full UK driving license SC Clearance Role details: Job role: Site Manager (nuclear) Job type: Contract Duration: 6 months' initial contract with view to extend Rate: £400 - 450 per day IR35 status: Inside IR35 Location: Field based - Chester to begin with To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Suzie Stone , by exploring the VIQU IT Recruitment website .
