Job Title: Mobile Packet Core & RAN Optimisation Expert Location: Reading & Remote Job Type: Contract Duration: 6 month initially Start Date: 1st May 2024 Pay Rate: TBC Flint UK Technology Services is looking for a Mobile Packet Core & RAN Optimisation Expert to join one of our telecommunications clients. We are looking for someone with a deep understanding of 3G, 4G and 5G packet Core Network architecture & operation as well as good understanding of RAN performance and demonstrable E2E optimization expertise in improving data customer experience via suggesting Network tuning & design changes as well interfacing with the packet core operations team to resolve ongoing systematic issues. Responsibilities: Monitor network performance through RAN and Core network OSS KPIs as well as crowdsource data. Work as Part of the network performance improvement team to deliver analysis for 4G and 5G Network performance through Drive test, network traces, crowd data and KPI analysis to improve the overall network performance focused on these technologies. Propose and pursue the required Packet Data Performance Improvement Design recommendation and changes. Suggest different features & parameter improvements to support the End-to-End Performance objectives related to Packet Data Performance Drive continuous improvements in Network Performance by focusing on Customer experience KPIs. Work in conjunction with team of E2E RAN, IMS Core & Transmission Design teams to ensure appropriate End to End solutions are delivered & ensure Packet Core Network Performance & Customer experience KPI Targets are maintained/exceeded. Skills, Experience and Qualifications Be an expert in Evolved Packet Core Network (MME, Packet Gateway, PCRF,) & preferably IMS Core (CSCF, MTAS - Multimedia Telephony Application Server, SBG, BGF/MRF). Good working knowledge of 3G MPC elements (GGSN, SGSN, DNS) and associated interfaces including key protocols including GTP, Radius, Diameter, RANAP and MAP. Deep Understanding of End-to-End VoLTE Solution and understanding of enriched communication services solutions Must have deep knowledge of Packet Troubleshooting and trace analysis. You will have experience using network statistics, network traces and drive trialling logs to analyse and improve network performance. Tracing tools eg Wireshark, NetScout, Empirix Must have wide experience in troubleshooting HW, SW & Signalling flow problems. Ability to provide technical solutions for network performance & optimisation of 4G and 5G networks. Five or more years of experience in an Established Mobile Network Operator or Vendor/Consultancy with genuine experience in technical projects with LTE/VoLTE/5G technology. Demonstrate the ability to communicate with multiple stakeholders within the organisation and ability to convert business requirements into a technical solution. You will have strong communication and presentation skills including presenting complex technical information in simple terms. BA/BS degree in computer science, telecommunication, electrical engineer or equivalent Excellent working knowledge of MS Office tools including Word, Powerpoint & Excel.
28/03/2024
Project-based
Job Title: Mobile Packet Core & RAN Optimisation Expert Location: Reading & Remote Job Type: Contract Duration: 6 month initially Start Date: 1st May 2024 Pay Rate: TBC Flint UK Technology Services is looking for a Mobile Packet Core & RAN Optimisation Expert to join one of our telecommunications clients. We are looking for someone with a deep understanding of 3G, 4G and 5G packet Core Network architecture & operation as well as good understanding of RAN performance and demonstrable E2E optimization expertise in improving data customer experience via suggesting Network tuning & design changes as well interfacing with the packet core operations team to resolve ongoing systematic issues. Responsibilities: Monitor network performance through RAN and Core network OSS KPIs as well as crowdsource data. Work as Part of the network performance improvement team to deliver analysis for 4G and 5G Network performance through Drive test, network traces, crowd data and KPI analysis to improve the overall network performance focused on these technologies. Propose and pursue the required Packet Data Performance Improvement Design recommendation and changes. Suggest different features & parameter improvements to support the End-to-End Performance objectives related to Packet Data Performance Drive continuous improvements in Network Performance by focusing on Customer experience KPIs. Work in conjunction with team of E2E RAN, IMS Core & Transmission Design teams to ensure appropriate End to End solutions are delivered & ensure Packet Core Network Performance & Customer experience KPI Targets are maintained/exceeded. Skills, Experience and Qualifications Be an expert in Evolved Packet Core Network (MME, Packet Gateway, PCRF,) & preferably IMS Core (CSCF, MTAS - Multimedia Telephony Application Server, SBG, BGF/MRF). Good working knowledge of 3G MPC elements (GGSN, SGSN, DNS) and associated interfaces including key protocols including GTP, Radius, Diameter, RANAP and MAP. Deep Understanding of End-to-End VoLTE Solution and understanding of enriched communication services solutions Must have deep knowledge of Packet Troubleshooting and trace analysis. You will have experience using network statistics, network traces and drive trialling logs to analyse and improve network performance. Tracing tools eg Wireshark, NetScout, Empirix Must have wide experience in troubleshooting HW, SW & Signalling flow problems. Ability to provide technical solutions for network performance & optimisation of 4G and 5G networks. Five or more years of experience in an Established Mobile Network Operator or Vendor/Consultancy with genuine experience in technical projects with LTE/VoLTE/5G technology. Demonstrate the ability to communicate with multiple stakeholders within the organisation and ability to convert business requirements into a technical solution. You will have strong communication and presentation skills including presenting complex technical information in simple terms. BA/BS degree in computer science, telecommunication, electrical engineer or equivalent Excellent working knowledge of MS Office tools including Word, Powerpoint & Excel.
EMC Engineer required for a long term contract assignment based in Bristol with some hybrid working. Responsibilities: EMC engineers are responsible for managing assigned milestone deliverables associated with EMC Engineering activities and act as focal point and specialist for EMC requirements for the project teams. The role involves writing Environmental Requirement Specifications (ERS's) and subsequent documentation including EMC Control Plans, Proving Plans, Proving Requirements and Proving Instructions in support of product development and qualification. Our EMC engineers oversee EMC qualification testing to ensure evidence will be suitable for our customers, working across functional and international boundaries to resolve sophisticated technical problems using analytical tools. Skillset/experience required: Essential * Higher education or significant experience within subject fields: Electronics, Electrical, Physics, EMC or similar. * Good Understanding of EMC and design principles. * Excellent communication skills at all levels, both verbally and in writing. * Ability to work to defined deadlines and within budget limits. * Excellent Analytical and Problem Solving skills. * Professional manner and adaptability when the companies needs are evolving. * Capable of working autonomously to meet the delivery needs of the company Desirable * Knowledge in the application of a military EMC standard to system, sub-system or equipment level is desirable (eg Defence Standard 59-, AECTP500, Mil-Std-461, RTCA DO160/EUROCAE ED-14). * Engineer's with previous experience in delivering support around the subject of electromagnetic compatibility. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
27/03/2024
Project-based
EMC Engineer required for a long term contract assignment based in Bristol with some hybrid working. Responsibilities: EMC engineers are responsible for managing assigned milestone deliverables associated with EMC Engineering activities and act as focal point and specialist for EMC requirements for the project teams. The role involves writing Environmental Requirement Specifications (ERS's) and subsequent documentation including EMC Control Plans, Proving Plans, Proving Requirements and Proving Instructions in support of product development and qualification. Our EMC engineers oversee EMC qualification testing to ensure evidence will be suitable for our customers, working across functional and international boundaries to resolve sophisticated technical problems using analytical tools. Skillset/experience required: Essential * Higher education or significant experience within subject fields: Electronics, Electrical, Physics, EMC or similar. * Good Understanding of EMC and design principles. * Excellent communication skills at all levels, both verbally and in writing. * Ability to work to defined deadlines and within budget limits. * Excellent Analytical and Problem Solving skills. * Professional manner and adaptability when the companies needs are evolving. * Capable of working autonomously to meet the delivery needs of the company Desirable * Knowledge in the application of a military EMC standard to system, sub-system or equipment level is desirable (eg Defence Standard 59-, AECTP500, Mil-Std-461, RTCA DO160/EUROCAE ED-14). * Engineer's with previous experience in delivering support around the subject of electromagnetic compatibility. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Wire Technician - £25per hour inside ir35 - 12 months (extensions likely) - Staffordshire - onsite working - single stage interview process - Sector: Energy Yolk Recruitment are recruiting for a Wire Technician to join our client in Staffordshire in a leading energy transformation project. Role Description: As an Electrical Control Panel Wire Technician, you'll need proficiency in interpreting electrical schematic drawings. Your role involves efficiently managing your time to complete assigned tasks within agreed deadlines as part of a larger assembly and testing team. At times, you may lead a production bay, under the guidance of a production team leader, ensuring adherence to standards and timely completion of assembly record cards. Flexibility in working hours is essential to meet project timelines, and a proactive approach to process improvements is encouraged. Responsibilities: Completion of assembly record cards for traceability of serial-numbered components. Assembly and wiring of electrical components based on drawings, parts lists, and specifications. Mechanical assembly of cubicles and frameworks. Bench assembly of electrical sub-assemblies. Ensuring the quality of work and addressing rework identified during inspection and testing. Updating electronic issue logs and liaising with design engineers. Core Skills: Experienced in interpreting electrical schematic drawings. Experience of assembly and wiring of electrical components Ability to obtain SC Clearance. Desirable Skills: Hold a current SC clearance
27/03/2024
Project-based
Wire Technician - £25per hour inside ir35 - 12 months (extensions likely) - Staffordshire - onsite working - single stage interview process - Sector: Energy Yolk Recruitment are recruiting for a Wire Technician to join our client in Staffordshire in a leading energy transformation project. Role Description: As an Electrical Control Panel Wire Technician, you'll need proficiency in interpreting electrical schematic drawings. Your role involves efficiently managing your time to complete assigned tasks within agreed deadlines as part of a larger assembly and testing team. At times, you may lead a production bay, under the guidance of a production team leader, ensuring adherence to standards and timely completion of assembly record cards. Flexibility in working hours is essential to meet project timelines, and a proactive approach to process improvements is encouraged. Responsibilities: Completion of assembly record cards for traceability of serial-numbered components. Assembly and wiring of electrical components based on drawings, parts lists, and specifications. Mechanical assembly of cubicles and frameworks. Bench assembly of electrical sub-assemblies. Ensuring the quality of work and addressing rework identified during inspection and testing. Updating electronic issue logs and liaising with design engineers. Core Skills: Experienced in interpreting electrical schematic drawings. Experience of assembly and wiring of electrical components Ability to obtain SC Clearance. Desirable Skills: Hold a current SC clearance
Wireperson - 12 Month Contract - Staffordshire VIQU has partnered with a leading consultancy who deliver critical projects in energy, water, renewables, and manufacturing, who are seeking a Wireperson to join their central production team. The Wireperson role will be geared towards control panel wiring, and the successful candidate will also support more junior members of the team in their development. Key skills & responsibilities: Minimum 3 years' experience as a Wireperson Experience working with electrical control panels and systems Able to read electrical schematic drawings Assembly and wiring of electrical components Mechanical assembly of cubicles and frameworks Bench assembly of electrical sub-assemblies Monitoring and updating assembly record cards and electronic issues log Liaising with Design Engineers Qualifications/Certifications would be a bonus, eg HNC/HND in Electrical Engineering Role details: Job role: Wireperson Job type: Contract Duration: 12 months Rate: £25 - £30 per hour IR35 status: Inside IR35 Location: Onsite in Stone, Staffordshire To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Suzie Stone , by exploring the VIQU IT Recruitment website .
27/03/2024
Project-based
Wireperson - 12 Month Contract - Staffordshire VIQU has partnered with a leading consultancy who deliver critical projects in energy, water, renewables, and manufacturing, who are seeking a Wireperson to join their central production team. The Wireperson role will be geared towards control panel wiring, and the successful candidate will also support more junior members of the team in their development. Key skills & responsibilities: Minimum 3 years' experience as a Wireperson Experience working with electrical control panels and systems Able to read electrical schematic drawings Assembly and wiring of electrical components Mechanical assembly of cubicles and frameworks Bench assembly of electrical sub-assemblies Monitoring and updating assembly record cards and electronic issues log Liaising with Design Engineers Qualifications/Certifications would be a bonus, eg HNC/HND in Electrical Engineering Role details: Job role: Wireperson Job type: Contract Duration: 12 months Rate: £25 - £30 per hour IR35 status: Inside IR35 Location: Onsite in Stone, Staffordshire To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Suzie Stone , by exploring the VIQU IT Recruitment website .
Role: Graduate or Junior PLC Electrical/Electronic Engineer Working Hours: 37.5 per week Location: Dundee, UK (hybrid permitted, 3+ days in the Dundee office required each week) Salary: Competitive About the role: We are seeking a graduate OR Junior PLC Electrical Design Engineer with a keen interest in electrical/electronic design and product development to join our team based in Dundee. The ideal candidate must have experience in electrical and electronic design, and in a degree studied control systems engineering and a natural problem-solving ability. You will work with a variety of products, including biomass cameras, electric stunning systems, acoustic and electric predator deterrents and sea lice removal systems, all designed to improve both operational efficiency and animal welfare standards. Reporting to the Lead Electronics Engineer and working as part of a dynamic and varied engineering team, you will provide electrical design support by preparing and checking design documentation, reviews, estimates and schedules. You will also support the business development process by inputting into tender responses. Experience of the aquaculture, agriculture, marine or offshore industries would be beneficial but is not essential. This role splits its time between hands on and theoretical works, therefore the ability to prioritise and manage your time effectively is essential. What you'll be doing: Develop, review, update and modify electrical design plans and work schedules to meet project requirements. Develop and maintain electrical panel schematics, controls and system schematics for our systems. Manage and check system installations, ensuring that product specification is met and adheres to relevant safety standards. Design, update and maintain user documentation and technical files as necessary, specific to each product. Provide technical support to customer service team. Design product documentation including all specifications, drawings, design calculations, user documents, technical reports, schematics and technical support material. Conduct research and development, performing diagnostics and troubleshooting equipment. Maintain and build trusted relationships with key customers, clients, partners, and stakeholders. The skills will learn as a graduate, so ignore the must haves Must have PLC experience. BSc in Electrical, Electronic or Control Systems Engineering or equivalent experience. Minimum of three years' experience in the design and electro-mechanical systems. Experienced in PLC based control systems, either in ladder logic or "C" based environments. Experience in 3 Phase supply, distribution systems, cable management systems, earthing and bonding designs. Experience in PCB layout and Schematic Entry Excellent PC, MS Office skills, coupled with bespoke programming or design software experience. Good working knowledge of legislation, British Standards, European standards, and international standards. Experienced to work in complex project environments with third-party vendors and subcontractors. Able to analyse data using sound statistical methodology and effectively present technical information. Strong communication, negotiation, interpersonal and influencing skills. Experience in aquaculture, agriculture, marine or offshore industries would be beneficial. Willingness to travel for on-site installation and/or survey. We offer a range of exciting benefits including: 33 days annual leave Death in service at 4 x your annual salary Employee Assistance Programme Enhanced parental leave policies Birthday day off Paid bereavement leave Paid sick leave Company pension scheme How to apply? Please email a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
27/03/2024
Full time
Role: Graduate or Junior PLC Electrical/Electronic Engineer Working Hours: 37.5 per week Location: Dundee, UK (hybrid permitted, 3+ days in the Dundee office required each week) Salary: Competitive About the role: We are seeking a graduate OR Junior PLC Electrical Design Engineer with a keen interest in electrical/electronic design and product development to join our team based in Dundee. The ideal candidate must have experience in electrical and electronic design, and in a degree studied control systems engineering and a natural problem-solving ability. You will work with a variety of products, including biomass cameras, electric stunning systems, acoustic and electric predator deterrents and sea lice removal systems, all designed to improve both operational efficiency and animal welfare standards. Reporting to the Lead Electronics Engineer and working as part of a dynamic and varied engineering team, you will provide electrical design support by preparing and checking design documentation, reviews, estimates and schedules. You will also support the business development process by inputting into tender responses. Experience of the aquaculture, agriculture, marine or offshore industries would be beneficial but is not essential. This role splits its time between hands on and theoretical works, therefore the ability to prioritise and manage your time effectively is essential. What you'll be doing: Develop, review, update and modify electrical design plans and work schedules to meet project requirements. Develop and maintain electrical panel schematics, controls and system schematics for our systems. Manage and check system installations, ensuring that product specification is met and adheres to relevant safety standards. Design, update and maintain user documentation and technical files as necessary, specific to each product. Provide technical support to customer service team. Design product documentation including all specifications, drawings, design calculations, user documents, technical reports, schematics and technical support material. Conduct research and development, performing diagnostics and troubleshooting equipment. Maintain and build trusted relationships with key customers, clients, partners, and stakeholders. The skills will learn as a graduate, so ignore the must haves Must have PLC experience. BSc in Electrical, Electronic or Control Systems Engineering or equivalent experience. Minimum of three years' experience in the design and electro-mechanical systems. Experienced in PLC based control systems, either in ladder logic or "C" based environments. Experience in 3 Phase supply, distribution systems, cable management systems, earthing and bonding designs. Experience in PCB layout and Schematic Entry Excellent PC, MS Office skills, coupled with bespoke programming or design software experience. Good working knowledge of legislation, British Standards, European standards, and international standards. Experienced to work in complex project environments with third-party vendors and subcontractors. Able to analyse data using sound statistical methodology and effectively present technical information. Strong communication, negotiation, interpersonal and influencing skills. Experience in aquaculture, agriculture, marine or offshore industries would be beneficial. Willingness to travel for on-site installation and/or survey. We offer a range of exciting benefits including: 33 days annual leave Death in service at 4 x your annual salary Employee Assistance Programme Enhanced parental leave policies Birthday day off Paid bereavement leave Paid sick leave Company pension scheme How to apply? Please email a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Are you a talented Hardware Engineer seeking an innovative role in IoT and smart technology? Lynx Recruitment is recruiting for a Senior Hardware Engineer to join our clients' team in Cambridge, UK. You will work in their state-of-the-art office adjacent to the prestigious Cambridge Science Park, with access to prototype labs, equipment and collaboration spaces. As a key member of the hardware team, you will design, develop and test innovative narrowband RF devices and modules. Responsibilities: Support hardware development projects from concept to production Design and layout PCBs, select components, create prototypes Perform testing to verify and validate product performance Execute field trials and manage external test facilities Collaborate with software, operations and test engineers Requirements: Degree in Electronic/Electrical Engineering or similar experience 5+ years hardware design and test experience Knowledge of RF systems, cellular protocols, TCP/IP, etc. Proficiency with Altium, CAD tools and lab equipment Excellent analytical and troubleshooting skills Strong communication and teamwork abilities Our client offers a competitive salary, share options, health insurance, pension contributions and 25 days holiday. If you are seeking to progress your career in IoT/electronics design at an innovative tech company, apply today!
27/03/2024
Full time
Are you a talented Hardware Engineer seeking an innovative role in IoT and smart technology? Lynx Recruitment is recruiting for a Senior Hardware Engineer to join our clients' team in Cambridge, UK. You will work in their state-of-the-art office adjacent to the prestigious Cambridge Science Park, with access to prototype labs, equipment and collaboration spaces. As a key member of the hardware team, you will design, develop and test innovative narrowband RF devices and modules. Responsibilities: Support hardware development projects from concept to production Design and layout PCBs, select components, create prototypes Perform testing to verify and validate product performance Execute field trials and manage external test facilities Collaborate with software, operations and test engineers Requirements: Degree in Electronic/Electrical Engineering or similar experience 5+ years hardware design and test experience Knowledge of RF systems, cellular protocols, TCP/IP, etc. Proficiency with Altium, CAD tools and lab equipment Excellent analytical and troubleshooting skills Strong communication and teamwork abilities Our client offers a competitive salary, share options, health insurance, pension contributions and 25 days holiday. If you are seeking to progress your career in IoT/electronics design at an innovative tech company, apply today!
Ready to take your electrical engineering career to the next level? Lynx Recruitment is recruiting for a Lead Electrical Design Engineer to join our clients' dynamic team in Birmingham. As a Team Leader, you will have the chance to drive change, improve efficiency, and lead a talented group of engineers to success. In this role, you will: Manage a team of electrical design engineers, championing the development and implementation of standards and processes Oversee the electrical design of products, ensuring compliance with technical and legislative requirements Take a senior role in design and project reviews, ensuring high-quality work is delivered on time and within budget Liaise with internal departments and external customers to manage priorities and solve problems Provide hands-on electrical engineering support to various projects as needed We are looking for an experienced professional with: At least 5 years' electrical engineering experience, with a proven track record of leadership Strong project management skills and the ability to manage multiple priorities Excellent communication and interpersonal skills, with the ability to build relationships across teams A passion for innovation and continuous improvement Proficiency in electrical design tools such as E-Plan and PDM works E-Plan training available for candidates with alternative software package experience In return, we offer: Competitive salary and benefits package Opportunities for professional development and growth A supportive and inclusive work environment The chance to work on exciting projects that contribute to national security If you are a British Passport holder and ready to take on a new challenge, we want to hear from you. Join our team and help us continue to deliver high-quality electrical engineering solutions. Apply today!
27/03/2024
Full time
Ready to take your electrical engineering career to the next level? Lynx Recruitment is recruiting for a Lead Electrical Design Engineer to join our clients' dynamic team in Birmingham. As a Team Leader, you will have the chance to drive change, improve efficiency, and lead a talented group of engineers to success. In this role, you will: Manage a team of electrical design engineers, championing the development and implementation of standards and processes Oversee the electrical design of products, ensuring compliance with technical and legislative requirements Take a senior role in design and project reviews, ensuring high-quality work is delivered on time and within budget Liaise with internal departments and external customers to manage priorities and solve problems Provide hands-on electrical engineering support to various projects as needed We are looking for an experienced professional with: At least 5 years' electrical engineering experience, with a proven track record of leadership Strong project management skills and the ability to manage multiple priorities Excellent communication and interpersonal skills, with the ability to build relationships across teams A passion for innovation and continuous improvement Proficiency in electrical design tools such as E-Plan and PDM works E-Plan training available for candidates with alternative software package experience In return, we offer: Competitive salary and benefits package Opportunities for professional development and growth A supportive and inclusive work environment The chance to work on exciting projects that contribute to national security If you are a British Passport holder and ready to take on a new challenge, we want to hear from you. Join our team and help us continue to deliver high-quality electrical engineering solutions. Apply today!
Senior Associate or Associate Director (Mechanical or Electrical) - Leading MEP Consultancy, Birmingham Lynx Recruitment is working with an award-winning engineering consultancy, to join the team and help deliver innovative solutions to complex engineering and design challenges for buildings. As a Senior Associate or Associate Director, you will be responsible for supporting and delivering designs for the Building Services sector. You will work within a multidisciplinary team of engineers and support staff, ensuring high-quality service for clients, developing new business opportunities, and maintaining profitability. This role is instrumental in helping to continue to grow and develop a team of technically competent engineers within this high-performing sector. Key responsibilities: Attend project meetings and disseminate briefs within the project team Work on a varied portfolio of projects both in the UK and internationally Lead the development of initial strategic concepts for projects Provide a lead role in an integrated project design team Engage with and mentor junior support staff Monitor fee expenditure, resources, and work delivered Explore new ways of working and facilitate innovation and research Maintain a high reputation within the industry and ensure adherence to QM and risk control procedures About you: Relevant degree in Building Services Engineering or equivalent qualification/experience Chartered Engineer status (CIBSE, IMechE, IET) or working towards submission Excellent technical knowledge in your primary discipline and a thorough understanding of Building Services Engineering and interdisciplinary design In-depth understanding of modern technical delivery methods, particularly in relation to BIM Experience working in a multi-disciplinary environment, leading, motivating, and supervising junior/senior engineers Excellent interpersonal and communication skills with proven ability in negotiating positive outcomes, resource planning, motivation, and management Previous consultancy experience with an appreciation for complementary specialisms such as acoustics, fire engineering, and computer modelling On offer is a competitive benefits package, including private medical scheme, life assurance, income protection, travel allowance, flexible working options, and more. Please apply today!
27/03/2024
Full time
Senior Associate or Associate Director (Mechanical or Electrical) - Leading MEP Consultancy, Birmingham Lynx Recruitment is working with an award-winning engineering consultancy, to join the team and help deliver innovative solutions to complex engineering and design challenges for buildings. As a Senior Associate or Associate Director, you will be responsible for supporting and delivering designs for the Building Services sector. You will work within a multidisciplinary team of engineers and support staff, ensuring high-quality service for clients, developing new business opportunities, and maintaining profitability. This role is instrumental in helping to continue to grow and develop a team of technically competent engineers within this high-performing sector. Key responsibilities: Attend project meetings and disseminate briefs within the project team Work on a varied portfolio of projects both in the UK and internationally Lead the development of initial strategic concepts for projects Provide a lead role in an integrated project design team Engage with and mentor junior support staff Monitor fee expenditure, resources, and work delivered Explore new ways of working and facilitate innovation and research Maintain a high reputation within the industry and ensure adherence to QM and risk control procedures About you: Relevant degree in Building Services Engineering or equivalent qualification/experience Chartered Engineer status (CIBSE, IMechE, IET) or working towards submission Excellent technical knowledge in your primary discipline and a thorough understanding of Building Services Engineering and interdisciplinary design In-depth understanding of modern technical delivery methods, particularly in relation to BIM Experience working in a multi-disciplinary environment, leading, motivating, and supervising junior/senior engineers Excellent interpersonal and communication skills with proven ability in negotiating positive outcomes, resource planning, motivation, and management Previous consultancy experience with an appreciation for complementary specialisms such as acoustics, fire engineering, and computer modelling On offer is a competitive benefits package, including private medical scheme, life assurance, income protection, travel allowance, flexible working options, and more. Please apply today!
We're looking for a passionate Software Engineer to join their team and revolutionize the world of automation! Here's why this is THE job for you: Be a Robotics Rockstar: Develop cutting-edge software for robots, image processing, and user interfaces. Challenge Accepted: Solve complex problems and innovate alongside a motivated team. From Concept to Customer: Collaborate with clients and suppliers to bring ideas to life. Travel the World (Maybe): Commission systems globally and provide customer training - adventure awaits! But that's not all! Join a Leading Innovator: They're at the forefront of modern technology, and you'll be right there with us. Level Up Your Skills: We offer a comprehensive training program to help you become the best engineer you can be. Stability & Fun: Enjoy a secure job, a friendly work environment, and flexible work arrangements. Do you have the following superpowers? Technical training in automation technology or electrical engineering High-level programming knowledge (think fluent in coding) A logical, structured, and fast work style (get things done!) German and English language skills (French or others are a bonus!) Ready to join the revolution? Apply now! Darwin Recruitment AG is a Zurich based, SECO licensed, privately owned subsidiary of Darwin Professional Staffing Group Ltd (a Global IT Recruitment Consultancy). Darwin Recruitment AG manages client relationships whilst also utilising Darwin Professional Staffing Group databases and networks to source Candidates and fulfil client requests. We do not ask for a placement fee from Candidates/Employees. If you wish to contact a specialist regarding this role, please contact us.
27/03/2024
Full time
We're looking for a passionate Software Engineer to join their team and revolutionize the world of automation! Here's why this is THE job for you: Be a Robotics Rockstar: Develop cutting-edge software for robots, image processing, and user interfaces. Challenge Accepted: Solve complex problems and innovate alongside a motivated team. From Concept to Customer: Collaborate with clients and suppliers to bring ideas to life. Travel the World (Maybe): Commission systems globally and provide customer training - adventure awaits! But that's not all! Join a Leading Innovator: They're at the forefront of modern technology, and you'll be right there with us. Level Up Your Skills: We offer a comprehensive training program to help you become the best engineer you can be. Stability & Fun: Enjoy a secure job, a friendly work environment, and flexible work arrangements. Do you have the following superpowers? Technical training in automation technology or electrical engineering High-level programming knowledge (think fluent in coding) A logical, structured, and fast work style (get things done!) German and English language skills (French or others are a bonus!) Ready to join the revolution? Apply now! Darwin Recruitment AG is a Zurich based, SECO licensed, privately owned subsidiary of Darwin Professional Staffing Group Ltd (a Global IT Recruitment Consultancy). Darwin Recruitment AG manages client relationships whilst also utilising Darwin Professional Staffing Group databases and networks to source Candidates and fulfil client requests. We do not ask for a placement fee from Candidates/Employees. If you wish to contact a specialist regarding this role, please contact us.
We are seeking a highly skilled and experienced RF Power Amplifier and RFIC Design Expert to join a global IDM in the Mobile telecommunications industry. The position is available at our client's research centre, where they lead in high-efficiency wideband power amplifier and IC design for FEMs/mobile and terminal applications. About the role: As an RF Power Amplifier and RFIC Design Expert, you will drive ground-breaking research in high-efficiency power amplifier architecture and integrated circuit design. Collaborate closely with stakeholders to define cutting-edge system and product requirements, elevating our position in mobile technology. What you should do: - Conduct pioneering research on high-efficiency power amplifier architectures for wideband and multi-band RF transmitters. - Explore next-gen RF transmitter efficiency enhancement technologies and pioneer new power device technology. - Lead research in high-performance and reconfigurable RFIC design, ensuring seamless integration within wideband RF Front End modules. - Tackle complex technological challenges, surpassing product requirements and setting new industry standards. - Drive innovation through proposing, reviewing, and evaluating cutting-edge technical ideas. What you should bring: - MSc or PhD in Electrical Engineering or equivalent, with 8+ years of hands-on experience in RFIC and high-efficiency RF power amplifier design. - Proficiency in RFIC/MMIC circuit design and simulation tools (ADS, MWO, Cadence, Spice, etc.). - Expertise in RF power amplifier and IC design in mobile devices, load-insensitive RF power amplifier design, and wideband power amplifier architectures. - Proven track record in designing and characterizing wideband and reconfigurable ICs for RF Front End modules. - Strong communication skills and ability to collaborate effectively with multidisciplinary teams. - Self-motivated, analytical, and problem-solving mindset. - Flexibility to travel within Europe and China. If you're looking to advance your career and aspire to shape the future of mobile telecom technology, we'd like to hear from you.
27/03/2024
We are seeking a highly skilled and experienced RF Power Amplifier and RFIC Design Expert to join a global IDM in the Mobile telecommunications industry. The position is available at our client's research centre, where they lead in high-efficiency wideband power amplifier and IC design for FEMs/mobile and terminal applications. About the role: As an RF Power Amplifier and RFIC Design Expert, you will drive ground-breaking research in high-efficiency power amplifier architecture and integrated circuit design. Collaborate closely with stakeholders to define cutting-edge system and product requirements, elevating our position in mobile technology. What you should do: - Conduct pioneering research on high-efficiency power amplifier architectures for wideband and multi-band RF transmitters. - Explore next-gen RF transmitter efficiency enhancement technologies and pioneer new power device technology. - Lead research in high-performance and reconfigurable RFIC design, ensuring seamless integration within wideband RF Front End modules. - Tackle complex technological challenges, surpassing product requirements and setting new industry standards. - Drive innovation through proposing, reviewing, and evaluating cutting-edge technical ideas. What you should bring: - MSc or PhD in Electrical Engineering or equivalent, with 8+ years of hands-on experience in RFIC and high-efficiency RF power amplifier design. - Proficiency in RFIC/MMIC circuit design and simulation tools (ADS, MWO, Cadence, Spice, etc.). - Expertise in RF power amplifier and IC design in mobile devices, load-insensitive RF power amplifier design, and wideband power amplifier architectures. - Proven track record in designing and characterizing wideband and reconfigurable ICs for RF Front End modules. - Strong communication skills and ability to collaborate effectively with multidisciplinary teams. - Self-motivated, analytical, and problem-solving mindset. - Flexibility to travel within Europe and China. If you're looking to advance your career and aspire to shape the future of mobile telecom technology, we'd like to hear from you.
Job title: Hardware Engineer Location: Scotland Job type: Permanent Salary: £35-40k per annum iO Associates is seeking a Hardware Engineer to work with a leader in the realm of test automation technologies for the data storage sector and other industries. Working on cutting edge technology for Data Centres, Telecoms, Self-Driving Cars, AI, and numerous more applications, we collaborate with the largest IT businesses in the world. We are looking for a Hardware Engineer who would be in charge of development throughout the whole product life cycle and collaborate with a small, knowledgeable team of hardware and software developers. Required: Electrical engineering degree or its equivalent is necessary. 1-2 years' minimum of relevant industry experience would be anticipated. A foundational understanding of electronics theory is necessary, as well as PCB layout and schematic design. Exposure to FPGA Development. Responsibilities: PCB design, schematics, and product definition. Device validation, manufacturing test development, and signal integrity analysis. Documentation pertaining to customers and internally. comprehension of field failures and RMA analysis. FPGA Design. This is a role with visits to the site. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth and career development throughout the organisation. Please apply on the link below or contact us if you want to know more about the role and company.
26/03/2024
Full time
Job title: Hardware Engineer Location: Scotland Job type: Permanent Salary: £35-40k per annum iO Associates is seeking a Hardware Engineer to work with a leader in the realm of test automation technologies for the data storage sector and other industries. Working on cutting edge technology for Data Centres, Telecoms, Self-Driving Cars, AI, and numerous more applications, we collaborate with the largest IT businesses in the world. We are looking for a Hardware Engineer who would be in charge of development throughout the whole product life cycle and collaborate with a small, knowledgeable team of hardware and software developers. Required: Electrical engineering degree or its equivalent is necessary. 1-2 years' minimum of relevant industry experience would be anticipated. A foundational understanding of electronics theory is necessary, as well as PCB layout and schematic design. Exposure to FPGA Development. Responsibilities: PCB design, schematics, and product definition. Device validation, manufacturing test development, and signal integrity analysis. Documentation pertaining to customers and internally. comprehension of field failures and RMA analysis. FPGA Design. This is a role with visits to the site. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth and career development throughout the organisation. Please apply on the link below or contact us if you want to know more about the role and company.
Electrical & Instrumentation Designer - £52 per hour inside ir35 - 6 months (extension likely) - East Lancashire - hybrid (2 days WFH) - one stage interview - Sector: Chemicals/Oil & Gas Yolk Recruitment are looking for an Electrical & Instrumentation Designer to work with a leader in development and manufacturing of the world's most critical chemical products. This is an exciting opportunity to work with a leader the industry, to develop electrical and instrumentation design drawings, construction and demolition requirements, identification of testing requirements and to assist with troubleshooting of modifications and new installations. Responsibilities: Evaluation of costings for E/I design and installation. Design and modification of schematic diagrams, single line diagrams, loop drawings, cable routing drawings, panel layout drawings, block cable diagrams, motor control centres Drafting of scopes of work, bill of materials, termination schedules, equipment data sheets, cable schedules, labelling schedules, proof testing documents, cable transfer documents Supporting the installation supervisor by providing design packs and technical support as required. Performing FAT's on site and at supplier locations Core Skills: A good understanding of P&ID's, line diagrams, process data sheets and mechanical drawings Competent in the use of AutoCAD 2019 Knowledge in low voltage power system design Knowledge in instrumentation and control loop design Desirable Skills: Knowledge of DCS/PLC systems (Emerson Delta V, Hima Sella Safety Systems and Mitsubishi PLC's)
26/03/2024
Project-based
Electrical & Instrumentation Designer - £52 per hour inside ir35 - 6 months (extension likely) - East Lancashire - hybrid (2 days WFH) - one stage interview - Sector: Chemicals/Oil & Gas Yolk Recruitment are looking for an Electrical & Instrumentation Designer to work with a leader in development and manufacturing of the world's most critical chemical products. This is an exciting opportunity to work with a leader the industry, to develop electrical and instrumentation design drawings, construction and demolition requirements, identification of testing requirements and to assist with troubleshooting of modifications and new installations. Responsibilities: Evaluation of costings for E/I design and installation. Design and modification of schematic diagrams, single line diagrams, loop drawings, cable routing drawings, panel layout drawings, block cable diagrams, motor control centres Drafting of scopes of work, bill of materials, termination schedules, equipment data sheets, cable schedules, labelling schedules, proof testing documents, cable transfer documents Supporting the installation supervisor by providing design packs and technical support as required. Performing FAT's on site and at supplier locations Core Skills: A good understanding of P&ID's, line diagrams, process data sheets and mechanical drawings Competent in the use of AutoCAD 2019 Knowledge in low voltage power system design Knowledge in instrumentation and control loop design Desirable Skills: Knowledge of DCS/PLC systems (Emerson Delta V, Hima Sella Safety Systems and Mitsubishi PLC's)
Our Client delivers turnkey projects for international customers from the food industry, pharmaceuticals, high-tech production and logistics sectors. They are specialized in the implementation of complex construction projects on a national and international level for clients such as Amazon, Gazeley and Bericote and implement the projects through our offices in England, Ireland, the USA and since 2018 also in Germany. At the moment we are looking for someone who would take on a Full time contract. Duties and Responsibilities: Responsible for the design coordination of the implementation plans of architects, structural engineers, building technicians, fire protection engineers and building physicists. Organisation of the design workshop. Checking the designs (construction). Your Profile: Completed studies in architecture, civil engineering (preferably electrical or mechanical engineering) or a comparable qualification. In addition, several years of professional experience in one of the aforementioned areas. Sound knowledge of materials and products in façade technology, basic understanding in the field of statics and building physics as well as a good spatial imagination. Very good knowledge in the use of CAD programs as well as in the field of digital planning. Solution-oriented thinking, negotiating skills as well as a good feel for people and issues and strong communication skills. Safe application of building standards and guidelines. Your Benefits: Supported relocation Electronic devices such as mobile phone and notebook, also available for private use A company car (brand and model of choice based on car policy) that can also be used privately or cost coverage of a public transportation ticket - depending on project location
26/03/2024
Full time
Our Client delivers turnkey projects for international customers from the food industry, pharmaceuticals, high-tech production and logistics sectors. They are specialized in the implementation of complex construction projects on a national and international level for clients such as Amazon, Gazeley and Bericote and implement the projects through our offices in England, Ireland, the USA and since 2018 also in Germany. At the moment we are looking for someone who would take on a Full time contract. Duties and Responsibilities: Responsible for the design coordination of the implementation plans of architects, structural engineers, building technicians, fire protection engineers and building physicists. Organisation of the design workshop. Checking the designs (construction). Your Profile: Completed studies in architecture, civil engineering (preferably electrical or mechanical engineering) or a comparable qualification. In addition, several years of professional experience in one of the aforementioned areas. Sound knowledge of materials and products in façade technology, basic understanding in the field of statics and building physics as well as a good spatial imagination. Very good knowledge in the use of CAD programs as well as in the field of digital planning. Solution-oriented thinking, negotiating skills as well as a good feel for people and issues and strong communication skills. Safe application of building standards and guidelines. Your Benefits: Supported relocation Electronic devices such as mobile phone and notebook, also available for private use A company car (brand and model of choice based on car policy) that can also be used privately or cost coverage of a public transportation ticket - depending on project location
The role: Black Hat Supervisor Location: Somerset 3 to 4 days a week Umbrella Only Would you like to join a global leader in consulting, technology services and digital transformation? Our client is at the forefront of innovation to address the entire breadth of opportunities in the evolving world of cloud, digital and platforms. Role purpose/summary The Black Hat Supervisor will support and supervise Framatome projects of Temporary Buildings or Structures erection on HPC site (subcontracted projects). As a "Black Hat" (non-working supervisor), manage all Health & Safety aspects of Installation activities on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks, on site supervision ensuring that all company policies are adhered to. Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with Framatome's client (HPC Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processesAttend coordination meetings with the HPC Principal Contractor and their other tier 1 contractors Act as and Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills/requirements HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Qualifications All profiles will be reviewed against the required skills and experience. Due to the high number of applications we will only be able to respond to successful applicants in the first instance. We thank you for your interest and the time taken to apply!
26/03/2024
Project-based
The role: Black Hat Supervisor Location: Somerset 3 to 4 days a week Umbrella Only Would you like to join a global leader in consulting, technology services and digital transformation? Our client is at the forefront of innovation to address the entire breadth of opportunities in the evolving world of cloud, digital and platforms. Role purpose/summary The Black Hat Supervisor will support and supervise Framatome projects of Temporary Buildings or Structures erection on HPC site (subcontracted projects). As a "Black Hat" (non-working supervisor), manage all Health & Safety aspects of Installation activities on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks, on site supervision ensuring that all company policies are adhered to. Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with Framatome's client (HPC Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processesAttend coordination meetings with the HPC Principal Contractor and their other tier 1 contractors Act as and Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills/requirements HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Qualifications All profiles will be reviewed against the required skills and experience. Due to the high number of applications we will only be able to respond to successful applicants in the first instance. We thank you for your interest and the time taken to apply!
Calling all automation enthusiasts! Do you dream of buildings that are not only comfortable and efficient, but also controlled by intelligent systems? I am looking for a hybrid superstar - a PLC Automation Engineer and Smart Building Automation Engineer - to join my clients passionate team and revolutionize the way buildings operate! Here's why this role is your ultimate challenge: Be the Mastermind of Automation: Develop and implement cutting-edge automation systems, using PLCs (Programmable Logic Controllers) to optimize building functions like HVAC, lighting, and security. Imagine - your skills create a symphony of efficiency! From Blueprint to Brilliance: Bridge the gap between design and reality. Translate engineering specifications into flawless PLC code that breathes life into smart building automation systems. Efficiency Champion: Identify and resolve technical challenges related to PLCs and building automation systems, ensuring peak performance and minimal energy consumption. Comfort Architect: Fine-tune HVAC systems using automation to create the perfect indoor climate - cool summers and warm winters, all controlled with the touch of a button! Do you have the skills to become a legend? PLC Powerhouse: 3+ years of experience in PLC programming and automation engineering is a must. You speak fluent PLC (Ladder Logic or similar)! Building Automation Brainiac: Solid understanding of smart building technologies and protocols used to integrate various systems. HVAC & Electrical Expertise: Knowledge of HVAC principles and electrical engineering is crucial to optimize building systems through automation. Tech-Savvy Problem Solver: Your experience has equipped you to tackle complex technical challenges and find innovative solutions in both PLC and building automation. Calibration King/Queen: Expertise in calibrating and commissioning HVAC equipment and building automation systems is a plus. Communication Champion: Collaborate effectively with engineers, technicians, architects, and clients to deliver exceptional results. Team Player with a Quality Spark: You value teamwork, have a meticulous eye for detail, and a drive for excellence. German is a must, and basic English or French is a plus. What awaits you in this automation utopia? Diverse and Enthralling Work: Every day brings a new challenge, keeping your skills sharp and engaged in both PLC and smart building automation. Level Up Your Skills: Stay at the forefront of your field with ongoing training and development opportunities in both PLC and smart building technologies. Make a Real Difference: Your expertise will directly impact the efficiency, comfort, and sustainability of buildings. Dynamic and Inspiring Environment: We foster innovation, collaboration, and a fun atmosphere where you can thrive as a true automation all-star! Darwin Recruitment AG is a Zurich based, SECO licensed, privately owned subsidiary of Darwin Professional Staffing Group Ltd (a Global IT Recruitment Consultancy). Darwin Recruitment AG manages client relationships whilst also utilising Darwin Professional Staffing Group databases and networks to source Candidates and fulfil client requests. We do not ask for a placement fee from Candidates/Employees. If you wish to contact a specialist regarding this role, please contact
26/03/2024
Full time
Calling all automation enthusiasts! Do you dream of buildings that are not only comfortable and efficient, but also controlled by intelligent systems? I am looking for a hybrid superstar - a PLC Automation Engineer and Smart Building Automation Engineer - to join my clients passionate team and revolutionize the way buildings operate! Here's why this role is your ultimate challenge: Be the Mastermind of Automation: Develop and implement cutting-edge automation systems, using PLCs (Programmable Logic Controllers) to optimize building functions like HVAC, lighting, and security. Imagine - your skills create a symphony of efficiency! From Blueprint to Brilliance: Bridge the gap between design and reality. Translate engineering specifications into flawless PLC code that breathes life into smart building automation systems. Efficiency Champion: Identify and resolve technical challenges related to PLCs and building automation systems, ensuring peak performance and minimal energy consumption. Comfort Architect: Fine-tune HVAC systems using automation to create the perfect indoor climate - cool summers and warm winters, all controlled with the touch of a button! Do you have the skills to become a legend? PLC Powerhouse: 3+ years of experience in PLC programming and automation engineering is a must. You speak fluent PLC (Ladder Logic or similar)! Building Automation Brainiac: Solid understanding of smart building technologies and protocols used to integrate various systems. HVAC & Electrical Expertise: Knowledge of HVAC principles and electrical engineering is crucial to optimize building systems through automation. Tech-Savvy Problem Solver: Your experience has equipped you to tackle complex technical challenges and find innovative solutions in both PLC and building automation. Calibration King/Queen: Expertise in calibrating and commissioning HVAC equipment and building automation systems is a plus. Communication Champion: Collaborate effectively with engineers, technicians, architects, and clients to deliver exceptional results. Team Player with a Quality Spark: You value teamwork, have a meticulous eye for detail, and a drive for excellence. German is a must, and basic English or French is a plus. What awaits you in this automation utopia? Diverse and Enthralling Work: Every day brings a new challenge, keeping your skills sharp and engaged in both PLC and smart building automation. Level Up Your Skills: Stay at the forefront of your field with ongoing training and development opportunities in both PLC and smart building technologies. Make a Real Difference: Your expertise will directly impact the efficiency, comfort, and sustainability of buildings. Dynamic and Inspiring Environment: We foster innovation, collaboration, and a fun atmosphere where you can thrive as a true automation all-star! Darwin Recruitment AG is a Zurich based, SECO licensed, privately owned subsidiary of Darwin Professional Staffing Group Ltd (a Global IT Recruitment Consultancy). Darwin Recruitment AG manages client relationships whilst also utilising Darwin Professional Staffing Group databases and networks to source Candidates and fulfil client requests. We do not ask for a placement fee from Candidates/Employees. If you wish to contact a specialist regarding this role, please contact
Electrical Engineer Stone, Staffordshire Up to £65,000 VIQU have partnered with a leading entity in operational technology and digital transformation. They boast a longstanding reputation for advanced system integration, with expertise in optimising efficiency and achieving impressive performance on a large scale. Their commitment to continuous innovation drives their forward-thinking approach. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. They are seeking skilled Electrical Engineers to join their Energy team, specialising in Electrical, Control & Instrumentation (E, C & I) design and implementation. The role entails designing electrical and control systems, particularly focusing on PLC based systems for thermal and hydro power generation. As the Electrical Engineer, your responsibilities include conducting site surveys, creating system designs, producing documentation, and providing support during site acceptance testing. The successful Electrical Engineer will possess expertise in control systems, field cabling systems, and control panel design, along with relevant education and proficiency in software such as Word, Autocad, and Excel. It is also desirable for the Electrical Engineer to have familiarity with specific control system platforms, site installation experience, knowledge of wiring regulations, and awareness of safety regulations. Essential Skills of the Electrical Engineer: - Experience in control systems within the energy market - Competency in field cabling systems including surveying and route identification - Competency in control panel design incorporating PLC, I/O, Comms cards, UPS's etc - Relevant education to at least degree level or HND with additional experience - Computer literacy with Word, Autocad, and Excel - Methodical approach to project interpretation and delivery - Understanding of Full Project Lifecycle - Hold a current full driving licence (UK or be able to easily convert to full UK) - Willingness to undergo a basic disclosure Scotland check. To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Electrical Engineer Stone, Staffordshire Up to £65,000
26/03/2024
Full time
Electrical Engineer Stone, Staffordshire Up to £65,000 VIQU have partnered with a leading entity in operational technology and digital transformation. They boast a longstanding reputation for advanced system integration, with expertise in optimising efficiency and achieving impressive performance on a large scale. Their commitment to continuous innovation drives their forward-thinking approach. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. They are seeking skilled Electrical Engineers to join their Energy team, specialising in Electrical, Control & Instrumentation (E, C & I) design and implementation. The role entails designing electrical and control systems, particularly focusing on PLC based systems for thermal and hydro power generation. As the Electrical Engineer, your responsibilities include conducting site surveys, creating system designs, producing documentation, and providing support during site acceptance testing. The successful Electrical Engineer will possess expertise in control systems, field cabling systems, and control panel design, along with relevant education and proficiency in software such as Word, Autocad, and Excel. It is also desirable for the Electrical Engineer to have familiarity with specific control system platforms, site installation experience, knowledge of wiring regulations, and awareness of safety regulations. Essential Skills of the Electrical Engineer: - Experience in control systems within the energy market - Competency in field cabling systems including surveying and route identification - Competency in control panel design incorporating PLC, I/O, Comms cards, UPS's etc - Relevant education to at least degree level or HND with additional experience - Computer literacy with Word, Autocad, and Excel - Methodical approach to project interpretation and delivery - Understanding of Full Project Lifecycle - Hold a current full driving licence (UK or be able to easily convert to full UK) - Willingness to undergo a basic disclosure Scotland check. To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Electrical Engineer Stone, Staffordshire Up to £65,000
Job Title: Manufacturing/Maintenance Technician Location: Portsmouth, Onsite Rate: £18-£23 per hour Contract Length: 3 months rolling (PAYE) Start Date: ASAP We are currently working with a global company, who specialise in advanced technologies for aerospace and defence industries. They provide aviation systems, aircraft engines, connectivity solutions, and defence technologies globally. With a focus on innovation, they offer maintenance services and contribute to space systems, maintaining a commitment to cutting-edge solutions. The Role As a Manufacturing Technician, you will be supporting, maintaining, and improving the production equipment to maximise manufacturing availability. Your other daily duties will include but will not be limited to: Sustain production equipment to achieve a target up time of at least 95% availability. Swiftly identify the underlying causes of equipment failures and execute necessary repairs. Oversee an established Planned Maintenance system, adhering to a predetermined schedule, recognising potential operator tasks to uphold process uptime, and optimise capacity. Manage the Planned Maintenance system and calibrate production ATE systems. Handle the servicing and repair of gas regulators. Guarantee the availability of adequate spares for a prompt response to component failures. Specify and execute enhancements to the production process or equipment, aiming for cost, productivity, or quality improvements. Complete necessary risk assessments for processes, equipment, and ergonomics. Ensure the timely completion of HSE actions. Draft technical documents outlining procedures, encompassing cell maintenance instructions, and defining TPM schedules. Collaborate with external partners/vendors on technical aspects of production equipment and spares. Create or detail essential jigs and fixtures. About You A minimum of three years' experience in a medium to high volume production environment is mandatory. Practical experience demonstrating a hands-on and methodical approach to mechanical and electrical fault diagnosis/analysis, utilising diagnostic tools/equipment. Effective communication skills with internal customers and external suppliers, encompassing both technical matters and general levels. Proven working knowledge of assembly automation, including the ability to diagnose pneumatic system logic. Previous experience in the installation/testing, and fault finding of electrical systems. Experience with PLC programming and control system interrogation would be advantageous. A diverse range of qualifications may be considered; however, a robust Engineering background is envisioned, preferably supported by a recognised Mechanical or Electrical apprenticeship. Possession of an ONC/HNC in an Engineering discipline would be advantageous. Electrical installation Qualification to a minimum of 17th Edition Proficiency in Literacy and Numeracy. Computer literacy is essential, with experience using MS Office. Essential qualities include being a team player. Ability to seek assistance from fellow employees. Organisational skills are imperative. Open-minded, flexible, and adaptable. Punctuality and reliability are key attributes. Proactive attitude, particularly in Health, Safety, and Environment (HSE) matters. If this is of interest to you, please apply with your latest CV.
26/03/2024
Project-based
Job Title: Manufacturing/Maintenance Technician Location: Portsmouth, Onsite Rate: £18-£23 per hour Contract Length: 3 months rolling (PAYE) Start Date: ASAP We are currently working with a global company, who specialise in advanced technologies for aerospace and defence industries. They provide aviation systems, aircraft engines, connectivity solutions, and defence technologies globally. With a focus on innovation, they offer maintenance services and contribute to space systems, maintaining a commitment to cutting-edge solutions. The Role As a Manufacturing Technician, you will be supporting, maintaining, and improving the production equipment to maximise manufacturing availability. Your other daily duties will include but will not be limited to: Sustain production equipment to achieve a target up time of at least 95% availability. Swiftly identify the underlying causes of equipment failures and execute necessary repairs. Oversee an established Planned Maintenance system, adhering to a predetermined schedule, recognising potential operator tasks to uphold process uptime, and optimise capacity. Manage the Planned Maintenance system and calibrate production ATE systems. Handle the servicing and repair of gas regulators. Guarantee the availability of adequate spares for a prompt response to component failures. Specify and execute enhancements to the production process or equipment, aiming for cost, productivity, or quality improvements. Complete necessary risk assessments for processes, equipment, and ergonomics. Ensure the timely completion of HSE actions. Draft technical documents outlining procedures, encompassing cell maintenance instructions, and defining TPM schedules. Collaborate with external partners/vendors on technical aspects of production equipment and spares. Create or detail essential jigs and fixtures. About You A minimum of three years' experience in a medium to high volume production environment is mandatory. Practical experience demonstrating a hands-on and methodical approach to mechanical and electrical fault diagnosis/analysis, utilising diagnostic tools/equipment. Effective communication skills with internal customers and external suppliers, encompassing both technical matters and general levels. Proven working knowledge of assembly automation, including the ability to diagnose pneumatic system logic. Previous experience in the installation/testing, and fault finding of electrical systems. Experience with PLC programming and control system interrogation would be advantageous. A diverse range of qualifications may be considered; however, a robust Engineering background is envisioned, preferably supported by a recognised Mechanical or Electrical apprenticeship. Possession of an ONC/HNC in an Engineering discipline would be advantageous. Electrical installation Qualification to a minimum of 17th Edition Proficiency in Literacy and Numeracy. Computer literacy is essential, with experience using MS Office. Essential qualities include being a team player. Ability to seek assistance from fellow employees. Organisational skills are imperative. Open-minded, flexible, and adaptable. Punctuality and reliability are key attributes. Proactive attitude, particularly in Health, Safety, and Environment (HSE) matters. If this is of interest to you, please apply with your latest CV.
Be the Control Specialist who Drives Innovation (m/f/d) - 100% Are you a control systems rockstar ready to unleash your skills on cutting-edge projects? Here's the challenge you've been waiting for: Shape the future: Take shared ownership of our process and control systems, pushing the boundaries with PCS7 standard expansion. Master of Many: Step up as a control system polyglot, expanding your expertise beyond PCS7 to Modicon, Cimplicity, and more! Production Hero: Ensure smooth operations, keeping the heart of our production beating strong. Troubleshooting Ninja: Become a problem-solving whiz, tackling system issues head-on and keeping things running flawlessly. On-Call Ace: Be part of the on-call team, ensuring seamless operations 24/7. Do you have the chops? You've aced your vocational apprenticeship in electrical engineering (EFZ) or hold equivalent training. Your hunger for knowledge is insatiable, with further training in automation (HF or TF) under your belt. You're a Step 7 and TIA Portal pro, effortlessly wielding these powerful tools. Bonus points for Modicon and PCS7 know-how (especially Route Control and Batch). German communication is a must (written and spoken), with English fluency a plus. You're an independent, detail-oriented rockstar - punctual, reliable, and a true team player. On-call duty doesn't faze you; you thrive in fast-paced environments. Why join them? Freedom to Fly: They empower your creativity and expertise, letting you take ownership of your work. Innovation Playground: Dive into a dynamic company at the forefront of technology, pushing boundaries together. Thriving Environment: Be part of a diverse and supportive team, where collaboration fuels success. Stellar Benefits: They offer a comprehensive package with competitive pay and fantastic social benefits. Ready to ditch the boring and make a real impact? Darwin Recruitment AG is a Zurich based, SECO licensed, privately owned subsidiary of Darwin Professional Staffing Group Ltd (a Global IT Recruitment Consultancy). Darwin Recruitment AG manages client relationships whilst also utilising Darwin Professional Staffing Group databases and networks to source Candidates and fulfil client requests. We do not ask for a placement fee from Candidates/Employees. If you wish to contact a specialist regarding this role, please contact
26/03/2024
Full time
Be the Control Specialist who Drives Innovation (m/f/d) - 100% Are you a control systems rockstar ready to unleash your skills on cutting-edge projects? Here's the challenge you've been waiting for: Shape the future: Take shared ownership of our process and control systems, pushing the boundaries with PCS7 standard expansion. Master of Many: Step up as a control system polyglot, expanding your expertise beyond PCS7 to Modicon, Cimplicity, and more! Production Hero: Ensure smooth operations, keeping the heart of our production beating strong. Troubleshooting Ninja: Become a problem-solving whiz, tackling system issues head-on and keeping things running flawlessly. On-Call Ace: Be part of the on-call team, ensuring seamless operations 24/7. Do you have the chops? You've aced your vocational apprenticeship in electrical engineering (EFZ) or hold equivalent training. Your hunger for knowledge is insatiable, with further training in automation (HF or TF) under your belt. You're a Step 7 and TIA Portal pro, effortlessly wielding these powerful tools. Bonus points for Modicon and PCS7 know-how (especially Route Control and Batch). German communication is a must (written and spoken), with English fluency a plus. You're an independent, detail-oriented rockstar - punctual, reliable, and a true team player. On-call duty doesn't faze you; you thrive in fast-paced environments. Why join them? Freedom to Fly: They empower your creativity and expertise, letting you take ownership of your work. Innovation Playground: Dive into a dynamic company at the forefront of technology, pushing boundaries together. Thriving Environment: Be part of a diverse and supportive team, where collaboration fuels success. Stellar Benefits: They offer a comprehensive package with competitive pay and fantastic social benefits. Ready to ditch the boring and make a real impact? Darwin Recruitment AG is a Zurich based, SECO licensed, privately owned subsidiary of Darwin Professional Staffing Group Ltd (a Global IT Recruitment Consultancy). Darwin Recruitment AG manages client relationships whilst also utilising Darwin Professional Staffing Group databases and networks to source Candidates and fulfil client requests. We do not ask for a placement fee from Candidates/Employees. If you wish to contact a specialist regarding this role, please contact
Job Advert: Senior Engineer - Power Systems Restoration Are you passionate about engineering and power systems restoration? Do you thrive on solving complex problems and ensuring the reliable functioning of electrical networks? If so, we have an exciting opportunity for you! At our client, a leading engineering company in the industry, we are seeking a Senior Engineer to join our dynamic team. As a Senior Engineer specialising in Power Systems Restoration, you will play a critical role in ensuring the uninterrupted flow of electricity to our customers. Key Responsibilities: Lead the planning and execution of power systems restoration projects, ensuring timely and efficient delivery. Conduct thorough analysis of power system faults and outages, identifying root causes and implementing effective solutions. Collaborate with cross-functional teams to develop and optimise power system restoration strategies. Stay updated with industry trends and best practises, applying innovative approaches to enhance power system resilience. Provide technical guidance and mentorship to junior engineers, fostering a culture of continuous learning and growth. Desired Skills and Qualifications: Bachelor's degree in Electrical Engineering or a related field. Extensive experience in power systems restoration, with a deep understanding of electrical networks, substations, and control systems. Proficient in power system analysis tools such as ETAP, PSS/E, or DIgSILENT. Strong problem-solving skills, capable of quickly identifying issues and implementing effective solutions. Excellent communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams. Proven leadership abilities, with the capability to guide and mentor junior engineers. Perks of Joining our team: Competitive salary. Full-time permanent contract providing stability and career growth opportunities. Access to cutting-edge technology and tools to support your work. Collaborative and inclusive work environment, fostering a culture of teamwork and innovation. Opportunities for professional development and training to enhance your skills. Flexible working arrangements, promoting work-life balance. If you are a driven and experienced Senior Engineer with a passion for power systems restoration, we would love to hear from you! Join our client's team and be part of an organisation that values expertise, innovation, and teamwork. To apply, please submit your CV and a cover letter outlining your relevant experience and why you are the ideal candidate for this role. We look forward to reviewing your application and embarking on a future of innovation and excellence together. Note: This role is based in [Location]. However, due to the current circumstances, remote work options are available. Adecco is a disability-confident employer. It is important to us that we run an inclusive recruitment process to support candidates with any disabilities and encourage applicants of all backgrounds and perspectives to apply. Adecco is committed to building an inclusive, supportive environment for you to explore the next steps in your career
26/03/2024
Full time
Job Advert: Senior Engineer - Power Systems Restoration Are you passionate about engineering and power systems restoration? Do you thrive on solving complex problems and ensuring the reliable functioning of electrical networks? If so, we have an exciting opportunity for you! At our client, a leading engineering company in the industry, we are seeking a Senior Engineer to join our dynamic team. As a Senior Engineer specialising in Power Systems Restoration, you will play a critical role in ensuring the uninterrupted flow of electricity to our customers. Key Responsibilities: Lead the planning and execution of power systems restoration projects, ensuring timely and efficient delivery. Conduct thorough analysis of power system faults and outages, identifying root causes and implementing effective solutions. Collaborate with cross-functional teams to develop and optimise power system restoration strategies. Stay updated with industry trends and best practises, applying innovative approaches to enhance power system resilience. Provide technical guidance and mentorship to junior engineers, fostering a culture of continuous learning and growth. Desired Skills and Qualifications: Bachelor's degree in Electrical Engineering or a related field. Extensive experience in power systems restoration, with a deep understanding of electrical networks, substations, and control systems. Proficient in power system analysis tools such as ETAP, PSS/E, or DIgSILENT. Strong problem-solving skills, capable of quickly identifying issues and implementing effective solutions. Excellent communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams. Proven leadership abilities, with the capability to guide and mentor junior engineers. Perks of Joining our team: Competitive salary. Full-time permanent contract providing stability and career growth opportunities. Access to cutting-edge technology and tools to support your work. Collaborative and inclusive work environment, fostering a culture of teamwork and innovation. Opportunities for professional development and training to enhance your skills. Flexible working arrangements, promoting work-life balance. If you are a driven and experienced Senior Engineer with a passion for power systems restoration, we would love to hear from you! Join our client's team and be part of an organisation that values expertise, innovation, and teamwork. To apply, please submit your CV and a cover letter outlining your relevant experience and why you are the ideal candidate for this role. We look forward to reviewing your application and embarking on a future of innovation and excellence together. Note: This role is based in [Location]. However, due to the current circumstances, remote work options are available. Adecco is a disability-confident employer. It is important to us that we run an inclusive recruitment process to support candidates with any disabilities and encourage applicants of all backgrounds and perspectives to apply. Adecco is committed to building an inclusive, supportive environment for you to explore the next steps in your career
Job Title: Senior Power System Planning Engineer Industry: Engineering Contract Type: Permanent Working Pattern: Full Time Are you passionate about engineering and looking for a new challenge? We are currently seeking a talented and driven individual to join our team as a Senior Power System Planning Engineer. This is an exciting opportunity to work in a dynamic and innovative environment, where you will play a key role in shaping the future of power systems. Responsibilities: Conduct detailed power system studies, including load flow, short circuit, and stability analysis. Develop and optimise power system models and study scenarios. Analyse and troubleshoot power system issues, providing solutions and recommendations. Collaborate with cross-functional teams to identify and implement improvements in power system planning processes. Stay up-to-date with industry standards and regulations, ensuring compliance in all power system planning activities. Provide technical support and guidance to junior engineers and other team members. Prepare reports and presentations on power system planning analysis and findings. Required Skills: Bachelor's or Master's degree in Electrical Engineering or a related field. Extensive experience in power system planning and analysis. Strong knowledge of power system modelling software, such as PSS/E or PowerFactory. Proficient in using programming languages, such as MATLAB or Python, for power system analysis. Excellent problem-solving and analytical skills. Ability to work effectively in a team environment and collaborate with cross-functional teams. Good communication skills, with the ability to present complex technical information in a clear and concise manner. In addition to the exciting responsibilities and challenging technical work, we offer a range of attractive benefits, including: Competitive salary package Opportunities for career development and progression. Flexible working arrangements to promote a healthy work-life balance. Supportive and inclusive work environment, fostering collaboration and teamwork. Access to training and professional development opportunities. Company-sponsored social events and team-building activities. If you are a motivated and experienced Power System Planning Engineer looking for a new opportunity, we would love to hear from you. Join our team and be a part of shaping the future of power systems. To apply, please submit your CV and cover letter detailing your relevant experience and why you are interested in this position. We look forward to reviewing your application and discussing this exciting opportunity further. Please note that only successful candidates will be contacted. Thank you for your understanding. Apply now and take the next step in your engineering career! Adecco is a disability-confident employer. It is important to us that we run an inclusive recruitment process to support candidates with any disabilities and encourage applicants of all backgrounds and perspectives to apply. Adecco is committed to building an inclusive, supportive environment for you to explore the next steps in your career
26/03/2024
Full time
Job Title: Senior Power System Planning Engineer Industry: Engineering Contract Type: Permanent Working Pattern: Full Time Are you passionate about engineering and looking for a new challenge? We are currently seeking a talented and driven individual to join our team as a Senior Power System Planning Engineer. This is an exciting opportunity to work in a dynamic and innovative environment, where you will play a key role in shaping the future of power systems. Responsibilities: Conduct detailed power system studies, including load flow, short circuit, and stability analysis. Develop and optimise power system models and study scenarios. Analyse and troubleshoot power system issues, providing solutions and recommendations. Collaborate with cross-functional teams to identify and implement improvements in power system planning processes. Stay up-to-date with industry standards and regulations, ensuring compliance in all power system planning activities. Provide technical support and guidance to junior engineers and other team members. Prepare reports and presentations on power system planning analysis and findings. Required Skills: Bachelor's or Master's degree in Electrical Engineering or a related field. Extensive experience in power system planning and analysis. Strong knowledge of power system modelling software, such as PSS/E or PowerFactory. Proficient in using programming languages, such as MATLAB or Python, for power system analysis. Excellent problem-solving and analytical skills. Ability to work effectively in a team environment and collaborate with cross-functional teams. Good communication skills, with the ability to present complex technical information in a clear and concise manner. In addition to the exciting responsibilities and challenging technical work, we offer a range of attractive benefits, including: Competitive salary package Opportunities for career development and progression. Flexible working arrangements to promote a healthy work-life balance. Supportive and inclusive work environment, fostering collaboration and teamwork. Access to training and professional development opportunities. Company-sponsored social events and team-building activities. If you are a motivated and experienced Power System Planning Engineer looking for a new opportunity, we would love to hear from you. Join our team and be a part of shaping the future of power systems. To apply, please submit your CV and cover letter detailing your relevant experience and why you are interested in this position. We look forward to reviewing your application and discussing this exciting opportunity further. Please note that only successful candidates will be contacted. Thank you for your understanding. Apply now and take the next step in your engineering career! Adecco is a disability-confident employer. It is important to us that we run an inclusive recruitment process to support candidates with any disabilities and encourage applicants of all backgrounds and perspectives to apply. Adecco is committed to building an inclusive, supportive environment for you to explore the next steps in your career