My client are a leading Software company who specialise in the Maritime Industry, and are looking for someone to help test their latest groundbreaking product. This role requires someone who has experience of testing physical products, and not just software. Here you will be: Ensure the products and procedures meet industry standards (ISO9001) Identify and communicate risks, issues and dependencies Testing on electrical devices, testing power supply voltage for example Testing wireless connectivity For this role, you also mentor junior members of the team, along with developing positive change within the company. On a software testing basis, you will be: Doing both manual and automation testing with Python UAT Testing Android and iOS testing Running tests and raising defects using Test Management Tools For more information, please call Stuart (see below) This role would require someone to work onsite for a minimum of 3 days a week. By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
23/04/2024
Full time
My client are a leading Software company who specialise in the Maritime Industry, and are looking for someone to help test their latest groundbreaking product. This role requires someone who has experience of testing physical products, and not just software. Here you will be: Ensure the products and procedures meet industry standards (ISO9001) Identify and communicate risks, issues and dependencies Testing on electrical devices, testing power supply voltage for example Testing wireless connectivity For this role, you also mentor junior members of the team, along with developing positive change within the company. On a software testing basis, you will be: Doing both manual and automation testing with Python UAT Testing Android and iOS testing Running tests and raising defects using Test Management Tools For more information, please call Stuart (see below) This role would require someone to work onsite for a minimum of 3 days a week. By applying to this advert you are giving CPS Group (UK) Ltd authority to hold and process your data for this specific role and any other roles we may deem suitable to you over time. We will not pass your data to any third party without your verbal or written permission to do so. All incoming and outgoing calls are recorded for training and compliance purposes. CPS Group (UK) Ltd is acting as an Employment Agency in relation to this vacancy. Our new privacy policy can be found on our website
Digital IC Design Engineer | Contract | Cambridge | Up to £70ph DOE | Outside IR35 | Hybrid Are you looking for a new opportunity within the Digital IC Design space? Are you looking to offer your expertise to help scale a growing team? Are you looking to join a fast-growing company working on industry leading technologies in Smartphones, AR/VR & Wearables? Then this might just be the role for you. We are working with an industry leading electronics company that operate in the precision motion solutions space with their work being applied in the Smartphone, AR/VR and Wearables sectors. They are looking to bring in a selection of IC Design Engineers with a digital bias to deliver industry leading IC RTL Design and technical mentoring to a highly skilled, close-knit team. Key Responsibilities: Digital design development for custom IC Integration including the writing of IP design specifications, coding Verilog and SystemVerilog models for simulation, synthesis and static timing analysis and writing automated simulation and verification build scripts. Building automated pre-silicon verification environment whilst supporting early development of Embedded firmware throughout start of project. Integrate and partition in-house designs and IP from third parties and wrap with modelling logic to represent mixed signal design element. Asist with the validation of new silicon chips with a mix between CI/CD automation and manual tests through electrical test equipment. Qualifications and Experience: Strong experience in digital custom IC design. Strong experience in digital IC verification (UVM, SVA, VIP, and UPF), for ASIC implementation. Strong RTL coding with Verilog and System Verilog. Strong knowledge of interface technology (I2C, SPI, UART, SWD, JTAG, etc). Strong knowledge of on-chip bus protocol (AMBA AHB, APB, AXI-Stream, etc). Experience with Linux OS, revision control (Git) and Scripting languages (Bash, Tcl, and Python). Experience with EDA tools for simulation (Siemens Quest), Synthesis (DesignCompiler). Pay rate: Up to £70 ph D.O.E outside IR35
23/04/2024
Project-based
Digital IC Design Engineer | Contract | Cambridge | Up to £70ph DOE | Outside IR35 | Hybrid Are you looking for a new opportunity within the Digital IC Design space? Are you looking to offer your expertise to help scale a growing team? Are you looking to join a fast-growing company working on industry leading technologies in Smartphones, AR/VR & Wearables? Then this might just be the role for you. We are working with an industry leading electronics company that operate in the precision motion solutions space with their work being applied in the Smartphone, AR/VR and Wearables sectors. They are looking to bring in a selection of IC Design Engineers with a digital bias to deliver industry leading IC RTL Design and technical mentoring to a highly skilled, close-knit team. Key Responsibilities: Digital design development for custom IC Integration including the writing of IP design specifications, coding Verilog and SystemVerilog models for simulation, synthesis and static timing analysis and writing automated simulation and verification build scripts. Building automated pre-silicon verification environment whilst supporting early development of Embedded firmware throughout start of project. Integrate and partition in-house designs and IP from third parties and wrap with modelling logic to represent mixed signal design element. Asist with the validation of new silicon chips with a mix between CI/CD automation and manual tests through electrical test equipment. Qualifications and Experience: Strong experience in digital custom IC design. Strong experience in digital IC verification (UVM, SVA, VIP, and UPF), for ASIC implementation. Strong RTL coding with Verilog and System Verilog. Strong knowledge of interface technology (I2C, SPI, UART, SWD, JTAG, etc). Strong knowledge of on-chip bus protocol (AMBA AHB, APB, AXI-Stream, etc). Experience with Linux OS, revision control (Git) and Scripting languages (Bash, Tcl, and Python). Experience with EDA tools for simulation (Siemens Quest), Synthesis (DesignCompiler). Pay rate: Up to £70 ph D.O.E outside IR35
We are currently looking on behalf of one of our important clients for an Application Engineer for Computational Electromagnetics (CEM). The role is a permanent position based in Zürich. Your Role: Support a development team during all software release activities (eg, testing of software, writing of application notes & manuals & training sessions). Provide technical support for global users. Collect feedback from users & partners & collaborate with research & development teams to improve a simulation platform. Develop showcases for various applications that demonstrate the features & capabilities of a simulation platform. Carry out technical presentations at seminars & workshops. Participation in scientific conferences & exhibitions. Research & observe market trends & competitor products. Your Skills & Experience: From 2 to 7 years of professional experience as an Application Engineer (or similar) OR a PhD Graduate with acquired associated skills. A Knowledge of & practical experience in the areas of Computational Modelling & Simulation, Computational Electromagnetics (CEM) & EM simulation software (eg, COMSOL, ANSYS) OR in Medical Device Engineering. A solid background in & understanding of Electromagnetic (EM) Theory. Any additional experience in the areas of Antenna Design, Software Development, Scripting or Web Applications is considered a plus. A good understanding of Software Development Processes. Ideally experienced in FDTD simulation tools such as CST. Your Profile: University Degree in Electrical Engineering or Physics Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.
23/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Application Engineer for Computational Electromagnetics (CEM). The role is a permanent position based in Zürich. Your Role: Support a development team during all software release activities (eg, testing of software, writing of application notes & manuals & training sessions). Provide technical support for global users. Collect feedback from users & partners & collaborate with research & development teams to improve a simulation platform. Develop showcases for various applications that demonstrate the features & capabilities of a simulation platform. Carry out technical presentations at seminars & workshops. Participation in scientific conferences & exhibitions. Research & observe market trends & competitor products. Your Skills & Experience: From 2 to 7 years of professional experience as an Application Engineer (or similar) OR a PhD Graduate with acquired associated skills. A Knowledge of & practical experience in the areas of Computational Modelling & Simulation, Computational Electromagnetics (CEM) & EM simulation software (eg, COMSOL, ANSYS) OR in Medical Device Engineering. A solid background in & understanding of Electromagnetic (EM) Theory. Any additional experience in the areas of Antenna Design, Software Development, Scripting or Web Applications is considered a plus. A good understanding of Software Development Processes. Ideally experienced in FDTD simulation tools such as CST. Your Profile: University Degree in Electrical Engineering or Physics Motivated to take on responsibilities & highly quality & team-oriented. Collaborative, good communication skills & sensitive to customer needs. Fluent in English (spoken & written), German language skills are considered a plus.
Electrical Engineer Stone, Staffordshire Up to £65,000 VIQU have partnered with a leading entity in operational technology and digital transformation. They boast a longstanding reputation for advanced system integration, with expertise in optimising efficiency and achieving impressive performance on a large scale. Their commitment to continuous innovation drives their forward-thinking approach. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. They are seeking skilled Electrical Engineers to join their Energy team, specialising in Electrical, Control & Instrumentation (E, C & I) design and implementation. The role entails designing electrical and control systems, particularly focusing on PLC based systems for thermal and hydro power generation. As the Electrical Engineer, your responsibilities include conducting site surveys, creating system designs, producing documentation, and providing support during site acceptance testing. The successful Electrical Engineer will possess expertise in control systems, field cabling systems, and control panel design, along with relevant education and proficiency in software such as Word, Autocad, and Excel. It is also desirable for the Electrical Engineer to have familiarity with specific control system platforms, site installation experience, knowledge of wiring regulations, and awareness of safety regulations. Essential Skills of the Electrical Engineer: - Experience in control systems within the energy market - Competency in field cabling systems including surveying and route identification - Competency in control panel design incorporating PLC, I/O, Comms cards, UPS's etc - Relevant education to at least degree level or HND with additional experience - Computer literacy with Word, Autocad, and Excel - Methodical approach to project interpretation and delivery - Understanding of Full Project Lifecycle - Hold a current full driving licence (UK or be able to easily convert to full UK) - Willingness to undergo a basic disclosure Scotland check. To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Electrical Engineer Stone, Staffordshire Up to £65,000
23/04/2024
Full time
Electrical Engineer Stone, Staffordshire Up to £65,000 VIQU have partnered with a leading entity in operational technology and digital transformation. They boast a longstanding reputation for advanced system integration, with expertise in optimising efficiency and achieving impressive performance on a large scale. Their commitment to continuous innovation drives their forward-thinking approach. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. They are seeking skilled Electrical Engineers to join their Energy team, specialising in Electrical, Control & Instrumentation (E, C & I) design and implementation. The role entails designing electrical and control systems, particularly focusing on PLC based systems for thermal and hydro power generation. As the Electrical Engineer, your responsibilities include conducting site surveys, creating system designs, producing documentation, and providing support during site acceptance testing. The successful Electrical Engineer will possess expertise in control systems, field cabling systems, and control panel design, along with relevant education and proficiency in software such as Word, Autocad, and Excel. It is also desirable for the Electrical Engineer to have familiarity with specific control system platforms, site installation experience, knowledge of wiring regulations, and awareness of safety regulations. Essential Skills of the Electrical Engineer: - Experience in control systems within the energy market - Competency in field cabling systems including surveying and route identification - Competency in control panel design incorporating PLC, I/O, Comms cards, UPS's etc - Relevant education to at least degree level or HND with additional experience - Computer literacy with Word, Autocad, and Excel - Methodical approach to project interpretation and delivery - Understanding of Full Project Lifecycle - Hold a current full driving licence (UK or be able to easily convert to full UK) - Willingness to undergo a basic disclosure Scotland check. To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Electrical Engineer Stone, Staffordshire Up to £65,000
The Opportunity: We're on the lookout for an Intelligent Transport Systems (ITS)/Transport Technology Consultant to assist in the development of highways technology schemes and solutions that will shape the digital roadmap for roadside technology asset improvements and rollouts. You'll operate in a Front End Consultancy role in a client facing position, understanding and analysing their needs, challenges and goals and providing expert advice and recommendations on how to optimize and enhance current and future roadside technology solutions. This role will attract those in Front End ITS Consultancy that want greater autonomy and career opportunities. Likewise it could also suit someone with a scheme design background using motorway technology assets (CCTV/MIDAS/SVD/ERT/MS3/4) and infrastructure. Both types of profile will need exceptional communication (written and verbal) and analytical skills, who can deliver professional consultancy services. Skills and Experience: A degree or equivalent experience in a technology based engineering discipline (electronic/electrical engineering, communications, etc.) Experience of design roadside technology schemes calculations and drawings, along with the ability to communicate these in a non-technical way A broad, but in depth understanding of technology aimed at the transport/mobility sector (sensors, camera, IoT devices, V2I, etc.) Exceptional communication, client/stakeholder management and analytical abilities, with prior client facing experience into transport related public sector bodies (National Highways, TfL, TfGM, etc.) Full UK Driving Licence Please call James Sample here at ISR to learn more
23/04/2024
Full time
The Opportunity: We're on the lookout for an Intelligent Transport Systems (ITS)/Transport Technology Consultant to assist in the development of highways technology schemes and solutions that will shape the digital roadmap for roadside technology asset improvements and rollouts. You'll operate in a Front End Consultancy role in a client facing position, understanding and analysing their needs, challenges and goals and providing expert advice and recommendations on how to optimize and enhance current and future roadside technology solutions. This role will attract those in Front End ITS Consultancy that want greater autonomy and career opportunities. Likewise it could also suit someone with a scheme design background using motorway technology assets (CCTV/MIDAS/SVD/ERT/MS3/4) and infrastructure. Both types of profile will need exceptional communication (written and verbal) and analytical skills, who can deliver professional consultancy services. Skills and Experience: A degree or equivalent experience in a technology based engineering discipline (electronic/electrical engineering, communications, etc.) Experience of design roadside technology schemes calculations and drawings, along with the ability to communicate these in a non-technical way A broad, but in depth understanding of technology aimed at the transport/mobility sector (sensors, camera, IoT devices, V2I, etc.) Exceptional communication, client/stakeholder management and analytical abilities, with prior client facing experience into transport related public sector bodies (National Highways, TfL, TfGM, etc.) Full UK Driving Licence Please call James Sample here at ISR to learn more
My client is looking for EC&I Engineer that had knowledge of all elements of EC&I. You'll be working for a leading Process/Chemical company based in Huddersfield. The client are an International Design House that provides engineering design, project management and construction management services for various industrial sectors but mainly focus in the Chemical/Process industries. Skills: Fully operational in specification and selection of all common types of industrial instruments (pressure, temperature, flow, level, weight, pH, conductivity) and valves Awareness of special analytical instruments Fully operational in hardware specification and selection of PLC/Scada/DCS systems Fully operational in producing URS and checking FDS and FAT Plans and FAT execution. Working knowledge of software standards such as batch management. Fully operational in all commonly used Microsoft software (Word, Excel etc) and AutoCAD 2D. AutoCAD Electrical. Fully operational in working in line with an ISO 9000 QA system using standard formats as necessary. Fully operational in Lead EC&I Engineer role in multi-disciplinary team and interfacing with clients. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
23/04/2024
Project-based
My client is looking for EC&I Engineer that had knowledge of all elements of EC&I. You'll be working for a leading Process/Chemical company based in Huddersfield. The client are an International Design House that provides engineering design, project management and construction management services for various industrial sectors but mainly focus in the Chemical/Process industries. Skills: Fully operational in specification and selection of all common types of industrial instruments (pressure, temperature, flow, level, weight, pH, conductivity) and valves Awareness of special analytical instruments Fully operational in hardware specification and selection of PLC/Scada/DCS systems Fully operational in producing URS and checking FDS and FAT Plans and FAT execution. Working knowledge of software standards such as batch management. Fully operational in all commonly used Microsoft software (Word, Excel etc) and AutoCAD 2D. AutoCAD Electrical. Fully operational in working in line with an ISO 9000 QA system using standard formats as necessary. Fully operational in Lead EC&I Engineer role in multi-disciplinary team and interfacing with clients. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
23/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
MP Recruitment Group
Sutton Courtenay, Oxfordshire
Main Purpose of Role: To be main point of contact to UK customers providing customer service, technical advice, and sales requirements to each customer s individual needs. To provide technical and commercial back-up to support external sales team Key Duties/Main Responsibilities: To help develop and grow sales to existing and new customers through offering technically sound and cost-effective drive solutions matching their needs. Dealing with telephone enquiries from customers. Based on information supplied by customer, select appropriate product. Prepare quotations and reports for customers as required. Use Business systems and procedures to maintain customer interaction history using CRM system. Support external sales team with technical and commercial support. Essential Skills A good telephone manner Capable of working in a close dynamic team Educated to ONC/HNC/Apprenticeship or equivalent experience in Mechanical or Electrical/Electronic Engineering Computer literate with Microsoft products, Outlook, Dynamics CRM, Excel, Word, PowerPoint Working use of SAP would be beneficial but not essential Technical sales experience would be beneficial. Full driving license and living 45 minutes commuting from Abingdon Training A training program will be put in place to cover both sales and product training; the program will be based on individual requirements. Performance Measures on Value of sales orders raised and On-time delivery to customers Use of CRM Software and internal business systems and procedures Benefits Bonus up to £3k per annum Holiday: starting on 22 days, rising by 1 day per completed year of service to a max of 25 days plus BH Hours : 8.30am 5pm Monday Thursday and Friday 8.30am 4pm (39 hour working week) 1 day per week WFH (only after passing 3 months probation) Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
23/04/2024
Full time
Main Purpose of Role: To be main point of contact to UK customers providing customer service, technical advice, and sales requirements to each customer s individual needs. To provide technical and commercial back-up to support external sales team Key Duties/Main Responsibilities: To help develop and grow sales to existing and new customers through offering technically sound and cost-effective drive solutions matching their needs. Dealing with telephone enquiries from customers. Based on information supplied by customer, select appropriate product. Prepare quotations and reports for customers as required. Use Business systems and procedures to maintain customer interaction history using CRM system. Support external sales team with technical and commercial support. Essential Skills A good telephone manner Capable of working in a close dynamic team Educated to ONC/HNC/Apprenticeship or equivalent experience in Mechanical or Electrical/Electronic Engineering Computer literate with Microsoft products, Outlook, Dynamics CRM, Excel, Word, PowerPoint Working use of SAP would be beneficial but not essential Technical sales experience would be beneficial. Full driving license and living 45 minutes commuting from Abingdon Training A training program will be put in place to cover both sales and product training; the program will be based on individual requirements. Performance Measures on Value of sales orders raised and On-time delivery to customers Use of CRM Software and internal business systems and procedures Benefits Bonus up to £3k per annum Holiday: starting on 22 days, rising by 1 day per completed year of service to a max of 25 days plus BH Hours : 8.30am 5pm Monday Thursday and Friday 8.30am 4pm (39 hour working week) 1 day per week WFH (only after passing 3 months probation) Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Are you an apprentice graduate in electrical engineering or systems engineering, or perhaps an ex-Navy Weapons Engineer looking to transition your skills into a dynamic civilian role? Look no further! We have the perfect opportunity for you to propel your career in the direction of electrical and systems design. About our client: Join a forward-thinking company that values expertise and innovation. Defence experience isn't essential - your skills and potential are what matter most to us. Location: Portsmouth Role Overview: As a Systems Electrical Integration Specialist, you'll be at the forefront of cutting-edge projects, focusing on the integration of Commercial Off-The-Shelf (COTS) and MOD systems. Your responsibilities will span a range of OEM Systems, including Medium Calibre Guns, Sensors (Fire Control & Surveillance), Radar, Electronic Warfare Systems, and Combat Management Systems (CMS). What We're Looking For: Candidates emerging from an apprenticeship (HNC level) in electrical or systems engineering, or ex-Navy Weapons Engineers. Passion for electrical and systems design. Strong understanding of Electrical Systems/Engineering theory. Willingness to learn and adapt - while prior design experience isn't necessary, a desire to grow and develop within the role is essential. Key Responsibilities: Production of Installation Solution Packs, encompassing Electrical/System Drawings, Penetrations, Cable Data Sheets, Bill of Materials, and associated Installation Instructions. Collaborate with multidisciplinary teams to ensure seamless integration of systems. Drive innovation and efficiency in system integration processes. What our client offers: Comprehensive training on tools such as AutoCAD, SolidWorks, Foran, and more. Opportunities for professional growth and development. A supportive and collaborative work environment where your ideas are valued. Competitive compensation package with excellent benefits. Ready to Take the Next Step? If you're ready to embark on an exciting journey in systems electrical integration and contribute to ground-breaking projects, we want to hear from you! Please be advised this position will require the successful candidate to undergo SC Security Clearance. Apply now and unleash your potential with us.
23/04/2024
Full time
Are you an apprentice graduate in electrical engineering or systems engineering, or perhaps an ex-Navy Weapons Engineer looking to transition your skills into a dynamic civilian role? Look no further! We have the perfect opportunity for you to propel your career in the direction of electrical and systems design. About our client: Join a forward-thinking company that values expertise and innovation. Defence experience isn't essential - your skills and potential are what matter most to us. Location: Portsmouth Role Overview: As a Systems Electrical Integration Specialist, you'll be at the forefront of cutting-edge projects, focusing on the integration of Commercial Off-The-Shelf (COTS) and MOD systems. Your responsibilities will span a range of OEM Systems, including Medium Calibre Guns, Sensors (Fire Control & Surveillance), Radar, Electronic Warfare Systems, and Combat Management Systems (CMS). What We're Looking For: Candidates emerging from an apprenticeship (HNC level) in electrical or systems engineering, or ex-Navy Weapons Engineers. Passion for electrical and systems design. Strong understanding of Electrical Systems/Engineering theory. Willingness to learn and adapt - while prior design experience isn't necessary, a desire to grow and develop within the role is essential. Key Responsibilities: Production of Installation Solution Packs, encompassing Electrical/System Drawings, Penetrations, Cable Data Sheets, Bill of Materials, and associated Installation Instructions. Collaborate with multidisciplinary teams to ensure seamless integration of systems. Drive innovation and efficiency in system integration processes. What our client offers: Comprehensive training on tools such as AutoCAD, SolidWorks, Foran, and more. Opportunities for professional growth and development. A supportive and collaborative work environment where your ideas are valued. Competitive compensation package with excellent benefits. Ready to Take the Next Step? If you're ready to embark on an exciting journey in systems electrical integration and contribute to ground-breaking projects, we want to hear from you! Please be advised this position will require the successful candidate to undergo SC Security Clearance. Apply now and unleash your potential with us.
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
23/04/2024
Project-based
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
22/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Radar Engineer - Algorithm Development Salary: £45,000 to £60,000 Dependent on experience We are currently seeking a skilled and experienced Radar Engineer to join the team at a leading defence engineering consultancy. You will have a strong background in algorithm development, with proficiency in MATLAB and Python. As a Radar Engineer, you will be responsible for designing, developing, and testing radar systems and algorithms for a range of applications. You will work closely with our multidisciplinary team of engineers to deliver innovative solutions to complex problems. Please note - Security clearance will be required for this role. Location: Greater Southampton area. Work Pattern: Flexible/Hybrid (A combination of home and office working) Key Responsibilities: Design, develop, and test radar algorithms using MATLAB and Python Collaborate with cross-functional teams to integrate algorithms into radar systems Conduct research to identify new radar technologies and techniques Analyze system performance and recommend improvements Prepare technical reports and presentations for clients and stakeholders Stay up-to-date with the latest developments in radar engineering and related fields Essential Skills and Experience: Degree in Electrical Engineering, Physics, or a related field Proven experience in algorithm development for radar systems Strong proficiency in MATLAB and Python Experience with radar system design and analysis Excellent problem-solving skills and attention to detail Strong communication and teamwork skills Desirable Skills and Experience: Experience with other programming languages such as C++ or Java Familiarity with machine learning and artificial intelligence techniques Experience with simulation tools such as Simulink or Xilinx System Generator Knowledge of radar signal processing techniques Benefits: This blue chip employer offers a supportive and cooperative work environment, where you will have the opportunity to work on exciting and challenging projects. Benefits include: Hybrid working pattern (a combination of home and office working) Competitive salary and benefits package Comprehensive training and development opportunities Access to cutting-edge technology and resources Opportunities to work with leading experts in the field If you are a motivated and experienced Radar Engineer looking for a new challenge, we would love to hear from you.
22/04/2024
Full time
Radar Engineer - Algorithm Development Salary: £45,000 to £60,000 Dependent on experience We are currently seeking a skilled and experienced Radar Engineer to join the team at a leading defence engineering consultancy. You will have a strong background in algorithm development, with proficiency in MATLAB and Python. As a Radar Engineer, you will be responsible for designing, developing, and testing radar systems and algorithms for a range of applications. You will work closely with our multidisciplinary team of engineers to deliver innovative solutions to complex problems. Please note - Security clearance will be required for this role. Location: Greater Southampton area. Work Pattern: Flexible/Hybrid (A combination of home and office working) Key Responsibilities: Design, develop, and test radar algorithms using MATLAB and Python Collaborate with cross-functional teams to integrate algorithms into radar systems Conduct research to identify new radar technologies and techniques Analyze system performance and recommend improvements Prepare technical reports and presentations for clients and stakeholders Stay up-to-date with the latest developments in radar engineering and related fields Essential Skills and Experience: Degree in Electrical Engineering, Physics, or a related field Proven experience in algorithm development for radar systems Strong proficiency in MATLAB and Python Experience with radar system design and analysis Excellent problem-solving skills and attention to detail Strong communication and teamwork skills Desirable Skills and Experience: Experience with other programming languages such as C++ or Java Familiarity with machine learning and artificial intelligence techniques Experience with simulation tools such as Simulink or Xilinx System Generator Knowledge of radar signal processing techniques Benefits: This blue chip employer offers a supportive and cooperative work environment, where you will have the opportunity to work on exciting and challenging projects. Benefits include: Hybrid working pattern (a combination of home and office working) Competitive salary and benefits package Comprehensive training and development opportunities Access to cutting-edge technology and resources Opportunities to work with leading experts in the field If you are a motivated and experienced Radar Engineer looking for a new challenge, we would love to hear from you.
Radar Engineer - Algorithm Development Salary: £65,000 to £80,000 Dependent on experience We are currently seeking a skilled and experienced Radar Engineer to join the team at a leading defence engineering consultancy. You will have a strong background in algorithm development, with proficiency in MATLAB and Python. As a Radar Engineer, you will be responsible for designing, developing, and testing radar systems and algorithms for a range of applications. You will work closely with our multidisciplinary team of engineers to deliver innovative solutions to complex problems. Please note - Security clearance will be required for this role. Location: Greater Southampton area. Work Pattern: Flexible/Hybrid (A combination of home and office working) Key Responsibilities: Design, develop, and test radar algorithms using MATLAB and Python Collaborate with cross-functional teams to integrate algorithms into radar systems Conduct research to identify new radar technologies and techniques Analyze system performance and recommend improvements Prepare technical reports and presentations for clients and stakeholders Stay up-to-date with the latest developments in radar engineering and related fields Essential Skills and Experience: Degree in Electrical Engineering, Physics, or a related field Proven experience in algorithm development for radar systems Strong proficiency in MATLAB and Python Experience with radar system design and analysis Excellent problem-solving skills and attention to detail Strong communication and teamwork skills Desirable Skills and Experience: Experience with other programming languages such as C++ or Java Familiarity with machine learning and artificial intelligence techniques Experience with simulation tools such as Simulink or Xilinx System Generator Knowledge of radar signal processing techniques Benefits: This blue chip employer offers a supportive and cooperative work environment, where you will have the opportunity to work on exciting and challenging projects. Benefits include: Hybrid working pattern (a combination of home and office working) Competitive salary and benefits package Comprehensive training and development opportunities Access to cutting-edge technology and resources Opportunities to work with leading experts in the field If you are a motivated and experienced Radar Engineer looking for a new challenge, we would love to hear from you.
22/04/2024
Full time
Radar Engineer - Algorithm Development Salary: £65,000 to £80,000 Dependent on experience We are currently seeking a skilled and experienced Radar Engineer to join the team at a leading defence engineering consultancy. You will have a strong background in algorithm development, with proficiency in MATLAB and Python. As a Radar Engineer, you will be responsible for designing, developing, and testing radar systems and algorithms for a range of applications. You will work closely with our multidisciplinary team of engineers to deliver innovative solutions to complex problems. Please note - Security clearance will be required for this role. Location: Greater Southampton area. Work Pattern: Flexible/Hybrid (A combination of home and office working) Key Responsibilities: Design, develop, and test radar algorithms using MATLAB and Python Collaborate with cross-functional teams to integrate algorithms into radar systems Conduct research to identify new radar technologies and techniques Analyze system performance and recommend improvements Prepare technical reports and presentations for clients and stakeholders Stay up-to-date with the latest developments in radar engineering and related fields Essential Skills and Experience: Degree in Electrical Engineering, Physics, or a related field Proven experience in algorithm development for radar systems Strong proficiency in MATLAB and Python Experience with radar system design and analysis Excellent problem-solving skills and attention to detail Strong communication and teamwork skills Desirable Skills and Experience: Experience with other programming languages such as C++ or Java Familiarity with machine learning and artificial intelligence techniques Experience with simulation tools such as Simulink or Xilinx System Generator Knowledge of radar signal processing techniques Benefits: This blue chip employer offers a supportive and cooperative work environment, where you will have the opportunity to work on exciting and challenging projects. Benefits include: Hybrid working pattern (a combination of home and office working) Competitive salary and benefits package Comprehensive training and development opportunities Access to cutting-edge technology and resources Opportunities to work with leading experts in the field If you are a motivated and experienced Radar Engineer looking for a new challenge, we would love to hear from you.
Infoplus Technologies UK Ltd
Stafford, Staffordshire
Experience: 6 -12 years Tools: AutoCAD, Revit, Navisworks Domain: HVDC/Substation/FACTS Responsibilities: Responsible for the design of the plant layout of HVDC and FACTS system considering customer specification, country-specific standards and EHS requirements Technical lead of an interdisciplinary project team including all stakeholders involved in the design processes. Responsible for the design of the overall plant layout in 3D considering BIM methodologies Technical negotiations with customers, engineering services and suppliers as well as contact person for the construction sites, preferably on site Cost calculation, scheduling, and design of the whole primary engineering for HVDC & FACTS systems, including electromagnetic calculations, studies (noise emissions, earthing, lightning protection) and material specifications Qualification: Knowledge in the field of standards for the design of power systems with a.c. voltages > 1 kV and d.c. voltage >1,5 kV as well as in 3D construction with Autodesk products (AutoCAD, Inventor, Navisworks) Completed university degree in electrical or mechanical engineering or comparable fields, alternatively completed training as a technician with correspondingly relevant professional experience Long-term experience in execution of large-scale plants as well as experience in project management (cost, quality, time) Basic knowledge of power systems and high-voltage technology
22/04/2024
Project-based
Experience: 6 -12 years Tools: AutoCAD, Revit, Navisworks Domain: HVDC/Substation/FACTS Responsibilities: Responsible for the design of the plant layout of HVDC and FACTS system considering customer specification, country-specific standards and EHS requirements Technical lead of an interdisciplinary project team including all stakeholders involved in the design processes. Responsible for the design of the overall plant layout in 3D considering BIM methodologies Technical negotiations with customers, engineering services and suppliers as well as contact person for the construction sites, preferably on site Cost calculation, scheduling, and design of the whole primary engineering for HVDC & FACTS systems, including electromagnetic calculations, studies (noise emissions, earthing, lightning protection) and material specifications Qualification: Knowledge in the field of standards for the design of power systems with a.c. voltages > 1 kV and d.c. voltage >1,5 kV as well as in 3D construction with Autodesk products (AutoCAD, Inventor, Navisworks) Completed university degree in electrical or mechanical engineering or comparable fields, alternatively completed training as a technician with correspondingly relevant professional experience Long-term experience in execution of large-scale plants as well as experience in project management (cost, quality, time) Basic knowledge of power systems and high-voltage technology
Calling All Tidal Power Pioneers! Are you electrified by innovation and powered by passion? Do you dream of designing systems that harness the mighty dance of the tides? If you're nodding your head like a buoy in high tide, then continue reading as this Control Systems Engineer role may be your next destination. You would be a part of a small but growing Electrical and Automation team , steering the generator power circuit, auxiliary power circuit and communication systems. As a Control Systems Engineer you champion product development initiatives that align with the technology development roadmap, like a true tidal trailblazer. You will be able to apply your deep understanding of LV, MV, HV systems and take ownership over design specifications. You will be directly involved with turbine simulator development and network infrastructure configuration. You enjoy a rticulating requirements and concept designs with the clarity of a calm sea, enabling our partners to bring your visions to life . You can apply your systems experience in ensuring a smooth process through all stages of the product life cycle, from the first sketch to the final wave of installation. You will have the autonomy to develop and refine standards and processes, making sure our electrical and automation systems are as reliable as the tides. This role would s uit a intermediate level candidate with demonstrated success in full automation systems ideally in power/marine however this is not essential. This r OLE is based in Bristol, you can expect a salary package up to £60,000 per annum as well as hybrid working, excellent career progression opportunities and a great working culture. If being at the forefront of tidal power technology with a company that leads product development and offshore services sounds like your cup of tea then please apply with your CV and we can arrange an initial chat to discuss further. *Unfortunately candidates not residing in the UK or require sponsorship will not be eligible to apply* To find out more about Progressive Recruitment please visit the website. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
22/04/2024
Full time
Calling All Tidal Power Pioneers! Are you electrified by innovation and powered by passion? Do you dream of designing systems that harness the mighty dance of the tides? If you're nodding your head like a buoy in high tide, then continue reading as this Control Systems Engineer role may be your next destination. You would be a part of a small but growing Electrical and Automation team , steering the generator power circuit, auxiliary power circuit and communication systems. As a Control Systems Engineer you champion product development initiatives that align with the technology development roadmap, like a true tidal trailblazer. You will be able to apply your deep understanding of LV, MV, HV systems and take ownership over design specifications. You will be directly involved with turbine simulator development and network infrastructure configuration. You enjoy a rticulating requirements and concept designs with the clarity of a calm sea, enabling our partners to bring your visions to life . You can apply your systems experience in ensuring a smooth process through all stages of the product life cycle, from the first sketch to the final wave of installation. You will have the autonomy to develop and refine standards and processes, making sure our electrical and automation systems are as reliable as the tides. This role would s uit a intermediate level candidate with demonstrated success in full automation systems ideally in power/marine however this is not essential. This r OLE is based in Bristol, you can expect a salary package up to £60,000 per annum as well as hybrid working, excellent career progression opportunities and a great working culture. If being at the forefront of tidal power technology with a company that leads product development and offshore services sounds like your cup of tea then please apply with your CV and we can arrange an initial chat to discuss further. *Unfortunately candidates not residing in the UK or require sponsorship will not be eligible to apply* To find out more about Progressive Recruitment please visit the website. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
22/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
Job Title: Mobile Packet Core & RAN Optimisation Expert Location: Reading & Remote Job Type: Contract Duration: 6 month initially Start Date: 1st May 2024 Pay Rate: TBC Flint UK Technology Services is looking for a Mobile Packet Core & RAN Optimisation Expert to join one of our telecommunications clients. We are looking for someone with a deep understanding of 3G, 4G and 5G packet Core Network architecture & operation as well as good understanding of RAN performance and demonstrable E2E optimization expertise in improving data customer experience via suggesting Network tuning & design changes as well interfacing with the packet core operations team to resolve ongoing systematic issues. Responsibilities: Monitor network performance through RAN and Core network OSS KPIs as well as crowdsource data. Work as Part of the network performance improvement team to deliver analysis for 4G and 5G Network performance through Drive test, network traces, crowd data and KPI analysis to improve the overall network performance focused on these technologies. Propose and pursue the required Packet Data Performance Improvement Design recommendation and changes. Suggest different features & parameter improvements to support the End-to-End Performance objectives related to Packet Data Performance Drive continuous improvements in Network Performance by focusing on Customer experience KPIs. Work in conjunction with team of E2E RAN, IMS Core & Transmission Design teams to ensure appropriate End to End solutions are delivered & ensure Packet Core Network Performance & Customer experience KPI Targets are maintained/exceeded. Skills, Experience and Qualifications Be an expert in Evolved Packet Core Network (MME, Packet Gateway, PCRF,) & preferably IMS Core (CSCF, MTAS - Multimedia Telephony Application Server, SBG, BGF/MRF). Good working knowledge of 3G MPC elements (GGSN, SGSN, DNS) and associated interfaces including key protocols including GTP, Radius, Diameter, RANAP and MAP. Deep Understanding of End-to-End VoLTE Solution and understanding of enriched communication services solutions Must have deep knowledge of Packet Troubleshooting and trace analysis. You will have experience using network statistics, network traces and drive trialling logs to analyse and improve network performance. Tracing tools eg Wireshark, NetScout, Empirix Must have wide experience in troubleshooting HW, SW & Signalling flow problems. Ability to provide technical solutions for network performance & optimisation of 4G and 5G networks. Five or more years of experience in an Established Mobile Network Operator or Vendor/Consultancy with genuine experience in technical projects with LTE/VoLTE/5G technology. Demonstrate the ability to communicate with multiple stakeholders within the organisation and ability to convert business requirements into a technical solution. You will have strong communication and presentation skills including presenting complex technical information in simple terms. BA/BS degree in computer science, telecommunication, electrical engineer or equivalent Excellent working knowledge of MS Office tools including Word, Powerpoint & Excel.
22/04/2024
Project-based
Job Title: Mobile Packet Core & RAN Optimisation Expert Location: Reading & Remote Job Type: Contract Duration: 6 month initially Start Date: 1st May 2024 Pay Rate: TBC Flint UK Technology Services is looking for a Mobile Packet Core & RAN Optimisation Expert to join one of our telecommunications clients. We are looking for someone with a deep understanding of 3G, 4G and 5G packet Core Network architecture & operation as well as good understanding of RAN performance and demonstrable E2E optimization expertise in improving data customer experience via suggesting Network tuning & design changes as well interfacing with the packet core operations team to resolve ongoing systematic issues. Responsibilities: Monitor network performance through RAN and Core network OSS KPIs as well as crowdsource data. Work as Part of the network performance improvement team to deliver analysis for 4G and 5G Network performance through Drive test, network traces, crowd data and KPI analysis to improve the overall network performance focused on these technologies. Propose and pursue the required Packet Data Performance Improvement Design recommendation and changes. Suggest different features & parameter improvements to support the End-to-End Performance objectives related to Packet Data Performance Drive continuous improvements in Network Performance by focusing on Customer experience KPIs. Work in conjunction with team of E2E RAN, IMS Core & Transmission Design teams to ensure appropriate End to End solutions are delivered & ensure Packet Core Network Performance & Customer experience KPI Targets are maintained/exceeded. Skills, Experience and Qualifications Be an expert in Evolved Packet Core Network (MME, Packet Gateway, PCRF,) & preferably IMS Core (CSCF, MTAS - Multimedia Telephony Application Server, SBG, BGF/MRF). Good working knowledge of 3G MPC elements (GGSN, SGSN, DNS) and associated interfaces including key protocols including GTP, Radius, Diameter, RANAP and MAP. Deep Understanding of End-to-End VoLTE Solution and understanding of enriched communication services solutions Must have deep knowledge of Packet Troubleshooting and trace analysis. You will have experience using network statistics, network traces and drive trialling logs to analyse and improve network performance. Tracing tools eg Wireshark, NetScout, Empirix Must have wide experience in troubleshooting HW, SW & Signalling flow problems. Ability to provide technical solutions for network performance & optimisation of 4G and 5G networks. Five or more years of experience in an Established Mobile Network Operator or Vendor/Consultancy with genuine experience in technical projects with LTE/VoLTE/5G technology. Demonstrate the ability to communicate with multiple stakeholders within the organisation and ability to convert business requirements into a technical solution. You will have strong communication and presentation skills including presenting complex technical information in simple terms. BA/BS degree in computer science, telecommunication, electrical engineer or equivalent Excellent working knowledge of MS Office tools including Word, Powerpoint & Excel.
Request Technology - Craig Johnson
Chicago, Illinois
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)
22/04/2024
Full time
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)
*Hybrid, 3 days onsite, 2 days remote* *We are unable to sponsor as this is a permanent Full time role* A prestigious company is looking for a Sr. .NET Product Engineer. This engineer will be doing full stack custom application development. They will work with .Net, C#, MVC, Javascript, jQuery, HTML 5, etc. Responsibilities: The Sr .NET Product Engineer I is responsible for delivering custom business solutions using the Microsoft technology stack. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Qualifications & Requirements A Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Technologies/Software Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture.
20/04/2024
Full time
*Hybrid, 3 days onsite, 2 days remote* *We are unable to sponsor as this is a permanent Full time role* A prestigious company is looking for a Sr. .NET Product Engineer. This engineer will be doing full stack custom application development. They will work with .Net, C#, MVC, Javascript, jQuery, HTML 5, etc. Responsibilities: The Sr .NET Product Engineer I is responsible for delivering custom business solutions using the Microsoft technology stack. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Qualifications & Requirements A Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Technologies/Software Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture.
We are currently looking on behalf of one of our important clients for an Embedded C Software Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Design, implement & document hardware-related software. Carry out unit tests & HIL simulations to ensure a high quality of the software. Work within interdisciplinary project teams & support systematic product development. Define requirements for software modules. Conduct code reviews. Your Skills: At least 2 years of professional experience in Developing Embedded Software in C. Experienced in Unit Testing. Ideally experienced in the fields of HIL Simulations & drive systems. Your Profile: Completed University Degree in the field of Computer Science or Electrical, Micro or Systems Engineering or similar. Analytical, methodical, efficient, collaborative & quality-oriented. Fluent German language skills (at least C1 level) are mandatory (* Please do not apply if you are not fluent in German.). Fluent English is also required & French is considered a plus. If you wish to apply, please send us your resume in Word or PDF format.
19/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Embedded C Software Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Design, implement & document hardware-related software. Carry out unit tests & HIL simulations to ensure a high quality of the software. Work within interdisciplinary project teams & support systematic product development. Define requirements for software modules. Conduct code reviews. Your Skills: At least 2 years of professional experience in Developing Embedded Software in C. Experienced in Unit Testing. Ideally experienced in the fields of HIL Simulations & drive systems. Your Profile: Completed University Degree in the field of Computer Science or Electrical, Micro or Systems Engineering or similar. Analytical, methodical, efficient, collaborative & quality-oriented. Fluent German language skills (at least C1 level) are mandatory (* Please do not apply if you are not fluent in German.). Fluent English is also required & French is considered a plus. If you wish to apply, please send us your resume in Word or PDF format.