I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £55 per hour (Inside IR35) Contract: 12 months The role must be fully aware of and adhere to Health & Safety standards and be fully familiar with all authorised documentation, Good Practice Guides and ISO standards. 1. Promote effective co-operation across Engineering and other functional teams 2. Assist in effective management of the customer, including liaison and relationship development with existing and new customers, to aid the development of business, resolution of technical and delivery issues, and such that the customer is fully briefed and informed of progress 3. Ensure procedures, codes and standards are correctly identified and applied to engineering and technical activities 4. Ensure procedures, codes and standards are correctly identified and applied to engineering and technical activities. 5. Contribute to Project Safety Assessment process 6. Ensure task and project risks are communicated and managed appropriately 7. Produce, review and approve calculations, analyses, drawings, models, design basis documentation and technical reports as assigned 8. Assessing the implications of changes, concessions and queries 9. Maintaining the engineering configuration, ensuring the overall design intent and integrity is maintained throughout design life cycle 10. Evaluate technical issues in order to develop proposals for investigations and/or solutions, including process improvements 11. Provide support to the Project Manager for the planning, control and delivery of tasks and projects 12. Make engineering decisions within own sphere of responsibility and delegated authority 13. Act as Technical Authority or Engineering Lead when authorised to do so. 14. Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 15. Keep up to date in relevant technical areas and develop skills and capabilities to be able to provide effective delivery. Maintain knowledge of Industry best practice, promote a culture of engineering best practice, support in driving cultural development and change 16. Contribute to learning from experience (LfE). requirement, during and post project 17. Support business development opportunities 18. Exercise care for own health and safety and that of others as defined by Health and Safety legislation, adhere to endorsed Company policy, procedures and delegations (eg Health & Safety, Diversity & Inclusion, Performance & Development Reviews and Finance etc.) Ensure application of highest standards for health and safety in immediate area of responsibility and ensure individual co-operation with respect to company standards about matters on health, safety and environment, ethics and behaviours 19. Support the business winning process through input into or review of tender requirements, including estimates Essential: Engineering degree (or equivalent qualification) in relevant engineering discipline, with significant demonstrable experience Chartered Engineer status (or actively working toward Chartered Status) Experience in working collaboratively in multi-discipline teams to deliver activities on a range of project types Demonstrable experience in covering a variety of tasks across a range of complexities Good communications skills and the ability to interface with other disciplines Desirable: Member of relevant institute or significant demonstrable engineering experience and capable of registration with the Engineering Council Experience in managing engineering scope for Projects from concept design to full Engineering, Procurement and Construction (EPC) Breadth and depth of experience in a range of commercial or defence projects Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
25/04/2024
Project-based
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £55 per hour (Inside IR35) Contract: 12 months The role must be fully aware of and adhere to Health & Safety standards and be fully familiar with all authorised documentation, Good Practice Guides and ISO standards. 1. Promote effective co-operation across Engineering and other functional teams 2. Assist in effective management of the customer, including liaison and relationship development with existing and new customers, to aid the development of business, resolution of technical and delivery issues, and such that the customer is fully briefed and informed of progress 3. Ensure procedures, codes and standards are correctly identified and applied to engineering and technical activities 4. Ensure procedures, codes and standards are correctly identified and applied to engineering and technical activities. 5. Contribute to Project Safety Assessment process 6. Ensure task and project risks are communicated and managed appropriately 7. Produce, review and approve calculations, analyses, drawings, models, design basis documentation and technical reports as assigned 8. Assessing the implications of changes, concessions and queries 9. Maintaining the engineering configuration, ensuring the overall design intent and integrity is maintained throughout design life cycle 10. Evaluate technical issues in order to develop proposals for investigations and/or solutions, including process improvements 11. Provide support to the Project Manager for the planning, control and delivery of tasks and projects 12. Make engineering decisions within own sphere of responsibility and delegated authority 13. Act as Technical Authority or Engineering Lead when authorised to do so. 14. Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 15. Keep up to date in relevant technical areas and develop skills and capabilities to be able to provide effective delivery. Maintain knowledge of Industry best practice, promote a culture of engineering best practice, support in driving cultural development and change 16. Contribute to learning from experience (LfE). requirement, during and post project 17. Support business development opportunities 18. Exercise care for own health and safety and that of others as defined by Health and Safety legislation, adhere to endorsed Company policy, procedures and delegations (eg Health & Safety, Diversity & Inclusion, Performance & Development Reviews and Finance etc.) Ensure application of highest standards for health and safety in immediate area of responsibility and ensure individual co-operation with respect to company standards about matters on health, safety and environment, ethics and behaviours 19. Support the business winning process through input into or review of tender requirements, including estimates Essential: Engineering degree (or equivalent qualification) in relevant engineering discipline, with significant demonstrable experience Chartered Engineer status (or actively working toward Chartered Status) Experience in working collaboratively in multi-discipline teams to deliver activities on a range of project types Demonstrable experience in covering a variety of tasks across a range of complexities Good communications skills and the ability to interface with other disciplines Desirable: Member of relevant institute or significant demonstrable engineering experience and capable of registration with the Engineering Council Experience in managing engineering scope for Projects from concept design to full Engineering, Procurement and Construction (EPC) Breadth and depth of experience in a range of commercial or defence projects Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £75 per hour (Inside IR35) Contract: 12 months The role must be fully aware of and adhere to Health & Safety standards and be fully familiar with all authorised documentation, Good Practice Guides and ISO standards. 1. Ensure effective management of multi discipline teams to ensure timely & efficient delivery of engineering work to meet customer agreed scope 2. Supervise engineers/technical specialists 3. Promote effective co-operation across Engineering and other functional teams 4. Ensure effective management of the customer, including liaison and relationship development with existing and new customers, to aid the development of business, resolution of technical and delivery issues, and such that the customer is fully briefed and informed of progress 5. Ensure technical management of the engineering output to ensure delivery of technical solutions in line with agreed technical scope 6. Produce, review, verify and approve outputs including: calculations, analyses, technical reports, technical specifications and method statements 7. Ensure that adequate review, verification and approval is undertaken on all their deliverables and for those under their direct control and supervision 8. Ensure that procedures, codes and standards are correctly identified and applied to engineering and technical activities 9. Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 10. Manage resource demands and development of capability skills to match needs of assigned work scopes 11. Ensure project and technical audits and review are planned & executed in order to impart learning and experience as appropriate and in line with agreed standards 12. Maintain knowledge of Industry best practice, promote a culture of engineering best practice, provide leadership and assist in driving cultural development and change 13. Contribute to learning from experience (LfE). requirement, during and post project 14. Support business development opportunities. 15. Exercise care for own health and safety and that of others as defined by Health and Safety legislation, adhere to endorsed Company policy, procedures and delegations (eg Health & Safety, Diversity & Inclusion, Performance & Development Reviews and Finance etc.) Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 16. Support the business winning process through input into or review of tender requirements, including estimates 17. Leading Self: Is a role model, demonstrating Cavendish principles, promoting health, safety and well being, respect and inclusion 18. Leading Others: Owns the performance and development of their team members, including effective and ongoing communication and feedback 19. Leading Resources: Responsible for effective planning and organisation of resources to deliver on customer promises Essential: Engineering degree (or equivalent qualification) in relevant engineering discipline, with significant demonstrable experience Chartered Engineer status Demonstrable experience in managing teams to deliver analysis activities on a range of project types Demonstrable experience in covering a variety of tasks across a range of complexities Excellent communications skills and the ability to interface with other disciplines Desirable: Member of relevant institute or significant demonstrable engineering experience and capable of registration with the Engineering Council Experience in managing engineering scope for Projects from concept design to full Engineering, Procurement and Construction (EPC) Breadth and depth of experience in a range of commercial or defence project Interested or know someone that could be Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
25/04/2024
Project-based
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £75 per hour (Inside IR35) Contract: 12 months The role must be fully aware of and adhere to Health & Safety standards and be fully familiar with all authorised documentation, Good Practice Guides and ISO standards. 1. Ensure effective management of multi discipline teams to ensure timely & efficient delivery of engineering work to meet customer agreed scope 2. Supervise engineers/technical specialists 3. Promote effective co-operation across Engineering and other functional teams 4. Ensure effective management of the customer, including liaison and relationship development with existing and new customers, to aid the development of business, resolution of technical and delivery issues, and such that the customer is fully briefed and informed of progress 5. Ensure technical management of the engineering output to ensure delivery of technical solutions in line with agreed technical scope 6. Produce, review, verify and approve outputs including: calculations, analyses, technical reports, technical specifications and method statements 7. Ensure that adequate review, verification and approval is undertaken on all their deliverables and for those under their direct control and supervision 8. Ensure that procedures, codes and standards are correctly identified and applied to engineering and technical activities 9. Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 10. Manage resource demands and development of capability skills to match needs of assigned work scopes 11. Ensure project and technical audits and review are planned & executed in order to impart learning and experience as appropriate and in line with agreed standards 12. Maintain knowledge of Industry best practice, promote a culture of engineering best practice, provide leadership and assist in driving cultural development and change 13. Contribute to learning from experience (LfE). requirement, during and post project 14. Support business development opportunities. 15. Exercise care for own health and safety and that of others as defined by Health and Safety legislation, adhere to endorsed Company policy, procedures and delegations (eg Health & Safety, Diversity & Inclusion, Performance & Development Reviews and Finance etc.) Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 16. Support the business winning process through input into or review of tender requirements, including estimates 17. Leading Self: Is a role model, demonstrating Cavendish principles, promoting health, safety and well being, respect and inclusion 18. Leading Others: Owns the performance and development of their team members, including effective and ongoing communication and feedback 19. Leading Resources: Responsible for effective planning and organisation of resources to deliver on customer promises Essential: Engineering degree (or equivalent qualification) in relevant engineering discipline, with significant demonstrable experience Chartered Engineer status Demonstrable experience in managing teams to deliver analysis activities on a range of project types Demonstrable experience in covering a variety of tasks across a range of complexities Excellent communications skills and the ability to interface with other disciplines Desirable: Member of relevant institute or significant demonstrable engineering experience and capable of registration with the Engineering Council Experience in managing engineering scope for Projects from concept design to full Engineering, Procurement and Construction (EPC) Breadth and depth of experience in a range of commercial or defence project Interested or know someone that could be Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
25/04/2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Infoplus Technologies UK Ltd
Peterborough, Cambridgeshire
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
25/04/2024
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
25/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
23/04/2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
22/04/2024
Full time
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!