We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
19/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing the teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
19/04/2024
Full time
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing the teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
18/04/2024
Full time
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
18/04/2024
Project-based
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
WA Consultants is currently recruiting for a contract TV Rack Systems Engineer for a client based in Bristol. The ideal candidate will have a robust background in electronic engineering or manufacturing, working electronics assemblies. You will need a keen understanding of safety standards, system design, and cable management. You will have a basic CAD capability for designing custom metal panel parts. Have solid organisational and logistic skills required to kit and build units for a range of internal and external customers. You will be comfortable with PC hardware, the Ubuntu operating system, and general system configurations, including Routers and Wi-Fi setups. Responsibilities: Disassembling TV's and Set Top Box units to mount their boards into test systems. Connecting the TV board interfaces into the rack systems to varying client requirements. Develop and construct custom rack units tailored for test automation of TV software products. Implement electrical and hardware solutions adhering to the highest safety and quality standards. Understand the CE Directive, and its implications for rack systems. Manage cable looms effectively for organised and efficient system configurations. Set up and maintain PC hardware, Routers, and WiFi networks within an Ubuntu operating system environment. Collaborate closely with the engineering team to develop, refine, and innovate system designs. Diagnose and resolve hardware, software, and system issues swiftly and efficiently. Stay updated on the latest technologies and methodologies in test automation and system design relevant to the TV software industry. Exhibit excellent customer-facing skills and the ability to represent the company professionally in client interactions. Be willing to travel across the UK for project implementations and customer support. Manage the procurement of parts and equipment, ensuring projects are completed on time and within budget. Utilise PCB and CAD design tools for necessary system modifications and enhancements. Work on site at customer locations to install, configure and maintain systems Essential skills: Degree or vocational qualifications in Electrical Engineering, Computer Science, or related fields. Demonstrated experience in electronic engineering and hardware development, ideally with TV's or monitors, perhaps working with rack units and test automation systems in the TV software sector. Knowledge of safety protocols, system design, and cable management. Comfortable with PC hardware, Ubuntu operating system, and network configurations. Exceptional troubleshooting skills across hardware, software, and system domains. Strong communication, collaboration, and problem-solving abilities, with customer-facing experience. Highly organised with proven ability to manage time effectively and handle the procurement process for parts and equipment. Willingness to travel within the UK as required for customer support and project implementation. Detail-oriented, with a passion for technology and innovation in the TV software industry. Please advise on availability and rate expectations on application. For further information, please contact Alexander Wilson. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
18/04/2024
Project-based
WA Consultants is currently recruiting for a contract TV Rack Systems Engineer for a client based in Bristol. The ideal candidate will have a robust background in electronic engineering or manufacturing, working electronics assemblies. You will need a keen understanding of safety standards, system design, and cable management. You will have a basic CAD capability for designing custom metal panel parts. Have solid organisational and logistic skills required to kit and build units for a range of internal and external customers. You will be comfortable with PC hardware, the Ubuntu operating system, and general system configurations, including Routers and Wi-Fi setups. Responsibilities: Disassembling TV's and Set Top Box units to mount their boards into test systems. Connecting the TV board interfaces into the rack systems to varying client requirements. Develop and construct custom rack units tailored for test automation of TV software products. Implement electrical and hardware solutions adhering to the highest safety and quality standards. Understand the CE Directive, and its implications for rack systems. Manage cable looms effectively for organised and efficient system configurations. Set up and maintain PC hardware, Routers, and WiFi networks within an Ubuntu operating system environment. Collaborate closely with the engineering team to develop, refine, and innovate system designs. Diagnose and resolve hardware, software, and system issues swiftly and efficiently. Stay updated on the latest technologies and methodologies in test automation and system design relevant to the TV software industry. Exhibit excellent customer-facing skills and the ability to represent the company professionally in client interactions. Be willing to travel across the UK for project implementations and customer support. Manage the procurement of parts and equipment, ensuring projects are completed on time and within budget. Utilise PCB and CAD design tools for necessary system modifications and enhancements. Work on site at customer locations to install, configure and maintain systems Essential skills: Degree or vocational qualifications in Electrical Engineering, Computer Science, or related fields. Demonstrated experience in electronic engineering and hardware development, ideally with TV's or monitors, perhaps working with rack units and test automation systems in the TV software sector. Knowledge of safety protocols, system design, and cable management. Comfortable with PC hardware, Ubuntu operating system, and network configurations. Exceptional troubleshooting skills across hardware, software, and system domains. Strong communication, collaboration, and problem-solving abilities, with customer-facing experience. Highly organised with proven ability to manage time effectively and handle the procurement process for parts and equipment. Willingness to travel within the UK as required for customer support and project implementation. Detail-oriented, with a passion for technology and innovation in the TV software industry. Please advise on availability and rate expectations on application. For further information, please contact Alexander Wilson. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
18/04/2024
Project-based
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
Subject - FPGA Developer - Xilinx - VHDL - Paignton - Competitive Salary - Excellent Benefits! Job Title - FPGA Developer (Xilinx, VHDL) Benefits - Pension, Life Insurance, Health Care, Dental, Gym, Birthday Benefits, 25 days' annual leave, Fitness Classes & Progression Location - Paignton The Client - Curo are Partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The Candidate - This role would suit a candidate with demonstrable industry experience of VHDL Product Specification & Development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. We are looking for a candidate with Xilinx FPGAs as opposed to Altera FPGAs or ASICs. The successful candidate would will have relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment, as well as strong experience in digital electronics. The Role - The key focus of this role is FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. This will include providing support, and the future development of existing Embedded firmware applications. Key Duties - FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. Design test/verification and qualification. Support and future development of existing Spirent Embedded firmware applications. Provide engineering support to internal Supply Chain and Client Services departments. Participate in the maintenance and enhancement of FPGA design processes and practices. Contribute to the on-going development and maintenance of existing products and features. Produce clear documentation to support the integration, system verification, configuration and use of the FPGA features. Requirements - Honours degree in Electronic Engineering, Computer Engineering, Computer Science, or a similar discipline Demonstrable post-graduate related experience of VHDL project specification and development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. Relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment. Experience with Xilinx FPGAs as opposed to Altera FPGAs or ASICs is preferable. Strong experience in digital electronics. HDL designer. Modelsim verification. Precision synthesis tool. Vivado place and route. Embedded firmware soft/hard platforms: Motorola Coldfire, Xilinx Microblaze or similar S/W languages C, C++, Visual Basic, TCL, Perl. Compilers: EDK hardware platform, Greenhills. Operating systems: Real Time applications running under Linux or Windows. Experience in Digital Modulation techniques, GNSS, Communications theory, Signal Processing, Encryption processes and Matlab are all advantages. Initiative - step up and take action without being asked. Look for opportunities to make a difference. Resourcefulness - adapt to new/difficult situations and devise ways to overcome obstacles. Decisive, determined, and persistent - demonstrating both individual and collective ownership. Excellent interpersonal communication and analytical skills. Team player with a highly collaborative and positive attitude. Communicates effectively with the ability to work as part of a multi-site team. Good problem-solving skills coupled with a strong aptitude to learn and innovate. Organised and methodical but also a creative thinker. To apply for this FPGA Developer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
17/04/2024
Full time
Subject - FPGA Developer - Xilinx - VHDL - Paignton - Competitive Salary - Excellent Benefits! Job Title - FPGA Developer (Xilinx, VHDL) Benefits - Pension, Life Insurance, Health Care, Dental, Gym, Birthday Benefits, 25 days' annual leave, Fitness Classes & Progression Location - Paignton The Client - Curo are Partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The Candidate - This role would suit a candidate with demonstrable industry experience of VHDL Product Specification & Development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. We are looking for a candidate with Xilinx FPGAs as opposed to Altera FPGAs or ASICs. The successful candidate would will have relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment, as well as strong experience in digital electronics. The Role - The key focus of this role is FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. This will include providing support, and the future development of existing Embedded firmware applications. Key Duties - FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. Design test/verification and qualification. Support and future development of existing Spirent Embedded firmware applications. Provide engineering support to internal Supply Chain and Client Services departments. Participate in the maintenance and enhancement of FPGA design processes and practices. Contribute to the on-going development and maintenance of existing products and features. Produce clear documentation to support the integration, system verification, configuration and use of the FPGA features. Requirements - Honours degree in Electronic Engineering, Computer Engineering, Computer Science, or a similar discipline Demonstrable post-graduate related experience of VHDL project specification and development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. Relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment. Experience with Xilinx FPGAs as opposed to Altera FPGAs or ASICs is preferable. Strong experience in digital electronics. HDL designer. Modelsim verification. Precision synthesis tool. Vivado place and route. Embedded firmware soft/hard platforms: Motorola Coldfire, Xilinx Microblaze or similar S/W languages C, C++, Visual Basic, TCL, Perl. Compilers: EDK hardware platform, Greenhills. Operating systems: Real Time applications running under Linux or Windows. Experience in Digital Modulation techniques, GNSS, Communications theory, Signal Processing, Encryption processes and Matlab are all advantages. Initiative - step up and take action without being asked. Look for opportunities to make a difference. Resourcefulness - adapt to new/difficult situations and devise ways to overcome obstacles. Decisive, determined, and persistent - demonstrating both individual and collective ownership. Excellent interpersonal communication and analytical skills. Team player with a highly collaborative and positive attitude. Communicates effectively with the ability to work as part of a multi-site team. Good problem-solving skills coupled with a strong aptitude to learn and innovate. Organised and methodical but also a creative thinker. To apply for this FPGA Developer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
West Virginia Network for Educational Telecomputing (WVNET)
Morgantown, West Virginia
WVNET is seeking to hire a new Telecommunications Network Specialist III to analyze, design, configure, install, deploy and troubleshoot LAN, WAN, Campus networks (mainly Cisco Routers, Switches, Firewalls), associated wireless infrastructure (Extreme, Meraki), VOIP solutions (CUCM, SIP trunks, UCaaS), System Monitoring (SolarWinds NPM) and remote access (VPN ASA, AAA, TACACS, RADIUS), cloud (OCI, Azure, AWS) and associated ongoing maintenance and updating of related hardware and software. This role will address critical organizational needs by: Resolving Technical Debt: Modernizing equipment, eliminating Legacy protocols, and optimizing configurations for improved network performance, reliability, and security. Managing Workload and Complexity: Strategizing to efficiently handle increased operations, new technologies, and remote work demands. Enhancing Security: Implementing next-gen Firewalls, intrusion detection systems, and security protocols to help safeguard our network against cyberattacks, data breaches, and other security risks. Specialized Network Skills: Utilize their specialized skills and expertise, particularly with the ever-evolving Cisco platforms and other network vendor languages, cloud/hybrid computing, Network Function Virtualization among others to optimize network performance. The ideal candidate will be self-motivated, able to multitask and enjoy problem solving. Candidate will be given lead on tasks and assignments to include working daily with local and remote technical and non-technical staff (Network Engineers, DBA's, System Admins, Computer Center Directors, Supreme Court Judges and Clerks, Tax Assessors, Vendors, etc.) to analyze and correct network-related issues. Work Location: Morgantown, WV, 26505 (on-site work required) Classification: Salary, Non-Classified, Full-Time Benefits, FLSA Exempt SALARY/BENEFITS Starting annual salary range is $70,000 - $80,000 plus excellent State of WV Employee benefits : health insurance, dental, vision, hearing, Health Savings Accounts/Flexible Spending Accounts, retirement investing, and life insurance plans, short-term/long-term disability insurance, as well as, generous amounts of vacation, sick, state & federal holidays, and professional development opportunities. MINIMUM EDUCATION Bachelor's Degree in Telecommunications, Electronics, Computer Science, or related field; or, equivalent professional experience in lieu of degree. MINIMUM EXPERIENCE.Details of relevant experience must be shown in your resume* Required - 6 to 8 years of progressively increasing experience and training in fields closely related to data communication or networking. Required - Cisco Certified Network Professional (CCNP) or Cisco Certified Network Associate (CCNA) with at least 5 years of relevant experience is preferred. Required - 6 to 8 years of hands-on experience is necessary to understand the complex interaction of communication protocols, computer-based networking equipment and associated wiring and electronics required to support the high-speed data transmission demanded by modern communications networks. Demonstrated hands-on proficiency with the Cisco CLI is a must. JOB DUTIES/RESPONSIBILITIES Maintaining and upgrading as needed multiple Operating Systems (Windows, Macintosh, Linux, Windows Server running on desktops, laptops, VMs) and their network-related software (Wireshark, Snort, TMS, ASDM, NMAP, etc.) as well as work to setup, troubleshooting and teardown wired and wireless networks at hotels and similar venues for statewide education & technology-related conferences, and occasional travel to all 55 WV counties (as well as Pittsburgh, PA and Columbus, OH) as needed to install, replace and maintain networking equipment. The Telecommunications Network Specialist III position will also provide training and guidance to TNS I's and TNS II's staff. All telecommunication positions are on call to respond to network emergencies 24/7/365. KNOWLEDGE/SKILLS/ABILITIES Problems encountered require considerable analytical and research skills coupled with an extensive knowledge base of the technology equipment used across the state unified network. Various systems are in use by WVNET and customers, which compounds the problems in providing network services. The design and implementation of new and/or integrated systems requires an in-depth knowledge of both the users' needs and the technologies available to achieve the desired results. Effective, clear and concise communication is the key to understanding the customer's requirements and creating a path forward. The ability to collaborate with teams of people over weeks and months on multiple and technical projects at once. Projects which have many moving parts' and which require accurate and detailed planning and research to avoid system and network outages of mission critical systems. Thorough knowledge of : Internet TCP/IP protocols, both IPv4 and IPv6; LAN and WAN configuration and interconnections; configuring port-channels, BVIs, SVI's and associated configuration; Routers, Switches, Firewalls, wireless access points, VPN and VOIP technologies; building telecommunications wiring, termination and cabling systems. Demonstrated abilities/skills to: think logically in problem troubleshooting while under stress; communication (both verbal/written) to technical and non-technical audiences; meet deadlines; work accurately and follow lengthy, specific directions; use creativity and imagination in technical problem solving; understand complex technical manuals and concepts; script/code in a programming language relevant to networking, whether for doing configuration management, automation, orchestration, monitoring, or management in general. PHYSICAL DEMANDS Frequently, perform two-person dead-lift large communications chassis weighing up to 200 lbs. For example, a Cisco 6509-E weighs between 60lbs empty up to 190lbs loaded, and has exactly 2 handles. Occasional travel to remote location for technical assistance. Often, especially when working at a remote location, there are only 2 people on the team. Therefore, telecommunication specialists must be able to lift and hold smaller Switches/Routers/Servers while the other person screws the brackets to the rack. It's basically a standing shoulder press of between 10 to 25 pounds. Frequently, physically crawl on the floor in order to run cabling beneath sub-floor, as well as climb ladders to work overhead, often above ceiling tiles. EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER/VETERANS/DISABLED The West Virginia Network for Educational Telecomputing (WVNET) is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, or protected veteran status and will not be discriminated against on the basis of disability. WVNET provides a collegial, respectful and inclusive environment that values the diversity, creativity and contributions of its staff.
17/04/2024
Full time
WVNET is seeking to hire a new Telecommunications Network Specialist III to analyze, design, configure, install, deploy and troubleshoot LAN, WAN, Campus networks (mainly Cisco Routers, Switches, Firewalls), associated wireless infrastructure (Extreme, Meraki), VOIP solutions (CUCM, SIP trunks, UCaaS), System Monitoring (SolarWinds NPM) and remote access (VPN ASA, AAA, TACACS, RADIUS), cloud (OCI, Azure, AWS) and associated ongoing maintenance and updating of related hardware and software. This role will address critical organizational needs by: Resolving Technical Debt: Modernizing equipment, eliminating Legacy protocols, and optimizing configurations for improved network performance, reliability, and security. Managing Workload and Complexity: Strategizing to efficiently handle increased operations, new technologies, and remote work demands. Enhancing Security: Implementing next-gen Firewalls, intrusion detection systems, and security protocols to help safeguard our network against cyberattacks, data breaches, and other security risks. Specialized Network Skills: Utilize their specialized skills and expertise, particularly with the ever-evolving Cisco platforms and other network vendor languages, cloud/hybrid computing, Network Function Virtualization among others to optimize network performance. The ideal candidate will be self-motivated, able to multitask and enjoy problem solving. Candidate will be given lead on tasks and assignments to include working daily with local and remote technical and non-technical staff (Network Engineers, DBA's, System Admins, Computer Center Directors, Supreme Court Judges and Clerks, Tax Assessors, Vendors, etc.) to analyze and correct network-related issues. Work Location: Morgantown, WV, 26505 (on-site work required) Classification: Salary, Non-Classified, Full-Time Benefits, FLSA Exempt SALARY/BENEFITS Starting annual salary range is $70,000 - $80,000 plus excellent State of WV Employee benefits : health insurance, dental, vision, hearing, Health Savings Accounts/Flexible Spending Accounts, retirement investing, and life insurance plans, short-term/long-term disability insurance, as well as, generous amounts of vacation, sick, state & federal holidays, and professional development opportunities. MINIMUM EDUCATION Bachelor's Degree in Telecommunications, Electronics, Computer Science, or related field; or, equivalent professional experience in lieu of degree. MINIMUM EXPERIENCE.Details of relevant experience must be shown in your resume* Required - 6 to 8 years of progressively increasing experience and training in fields closely related to data communication or networking. Required - Cisco Certified Network Professional (CCNP) or Cisco Certified Network Associate (CCNA) with at least 5 years of relevant experience is preferred. Required - 6 to 8 years of hands-on experience is necessary to understand the complex interaction of communication protocols, computer-based networking equipment and associated wiring and electronics required to support the high-speed data transmission demanded by modern communications networks. Demonstrated hands-on proficiency with the Cisco CLI is a must. JOB DUTIES/RESPONSIBILITIES Maintaining and upgrading as needed multiple Operating Systems (Windows, Macintosh, Linux, Windows Server running on desktops, laptops, VMs) and their network-related software (Wireshark, Snort, TMS, ASDM, NMAP, etc.) as well as work to setup, troubleshooting and teardown wired and wireless networks at hotels and similar venues for statewide education & technology-related conferences, and occasional travel to all 55 WV counties (as well as Pittsburgh, PA and Columbus, OH) as needed to install, replace and maintain networking equipment. The Telecommunications Network Specialist III position will also provide training and guidance to TNS I's and TNS II's staff. All telecommunication positions are on call to respond to network emergencies 24/7/365. KNOWLEDGE/SKILLS/ABILITIES Problems encountered require considerable analytical and research skills coupled with an extensive knowledge base of the technology equipment used across the state unified network. Various systems are in use by WVNET and customers, which compounds the problems in providing network services. The design and implementation of new and/or integrated systems requires an in-depth knowledge of both the users' needs and the technologies available to achieve the desired results. Effective, clear and concise communication is the key to understanding the customer's requirements and creating a path forward. The ability to collaborate with teams of people over weeks and months on multiple and technical projects at once. Projects which have many moving parts' and which require accurate and detailed planning and research to avoid system and network outages of mission critical systems. Thorough knowledge of : Internet TCP/IP protocols, both IPv4 and IPv6; LAN and WAN configuration and interconnections; configuring port-channels, BVIs, SVI's and associated configuration; Routers, Switches, Firewalls, wireless access points, VPN and VOIP technologies; building telecommunications wiring, termination and cabling systems. Demonstrated abilities/skills to: think logically in problem troubleshooting while under stress; communication (both verbal/written) to technical and non-technical audiences; meet deadlines; work accurately and follow lengthy, specific directions; use creativity and imagination in technical problem solving; understand complex technical manuals and concepts; script/code in a programming language relevant to networking, whether for doing configuration management, automation, orchestration, monitoring, or management in general. PHYSICAL DEMANDS Frequently, perform two-person dead-lift large communications chassis weighing up to 200 lbs. For example, a Cisco 6509-E weighs between 60lbs empty up to 190lbs loaded, and has exactly 2 handles. Occasional travel to remote location for technical assistance. Often, especially when working at a remote location, there are only 2 people on the team. Therefore, telecommunication specialists must be able to lift and hold smaller Switches/Routers/Servers while the other person screws the brackets to the rack. It's basically a standing shoulder press of between 10 to 25 pounds. Frequently, physically crawl on the floor in order to run cabling beneath sub-floor, as well as climb ladders to work overhead, often above ceiling tiles. EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER/VETERANS/DISABLED The West Virginia Network for Educational Telecomputing (WVNET) is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, or protected veteran status and will not be discriminated against on the basis of disability. WVNET provides a collegial, respectful and inclusive environment that values the diversity, creativity and contributions of its staff.
Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum + Car allowance VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
16/04/2024
Full time
Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum + Car allowance VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
Senior Firmware Engineer We are looking for a Senior Firmware Engineer (C/C++) to join our client in the Chur area, Graubünden. In this permanent position, you'll be responsible for architecting, developing, and integrating hardware-related software, as well as leading firmware development and maintenance. You'll collaborate closely with hardware developers and create comprehensive project documentation. To excel in this role, you should have a technical degree with electronics knowledge and extensive experience in C/C++ firmware development. Skills in GUI development (TouchGFX), FreeRTOS, GIT/GitLab, and Python are advantageous. We're seeking someone with a passion for innovation, strong communication skills in German and English, and an independent, structured work approach.
16/04/2024
Full time
Senior Firmware Engineer We are looking for a Senior Firmware Engineer (C/C++) to join our client in the Chur area, Graubünden. In this permanent position, you'll be responsible for architecting, developing, and integrating hardware-related software, as well as leading firmware development and maintenance. You'll collaborate closely with hardware developers and create comprehensive project documentation. To excel in this role, you should have a technical degree with electronics knowledge and extensive experience in C/C++ firmware development. Skills in GUI development (TouchGFX), FreeRTOS, GIT/GitLab, and Python are advantageous. We're seeking someone with a passion for innovation, strong communication skills in German and English, and an independent, structured work approach.
Tender Engineer/Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Tender Engineer/Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
15/04/2024
Full time
Tender Engineer/Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Tender Engineer/Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.