We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
22/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Infoplus Technologies UK Ltd
Stafford, Staffordshire
Experience: 6 -12 years Tools: AutoCAD, Revit, Navisworks Domain: HVDC/Substation/FACTS Responsibilities: Responsible for the design of the plant layout of HVDC and FACTS system considering customer specification, country-specific standards and EHS requirements Technical lead of an interdisciplinary project team including all stakeholders involved in the design processes. Responsible for the design of the overall plant layout in 3D considering BIM methodologies Technical negotiations with customers, engineering services and suppliers as well as contact person for the construction sites, preferably on site Cost calculation, scheduling, and design of the whole primary engineering for HVDC & FACTS systems, including electromagnetic calculations, studies (noise emissions, earthing, lightning protection) and material specifications Qualification: Knowledge in the field of standards for the design of power systems with a.c. voltages > 1 kV and d.c. voltage >1,5 kV as well as in 3D construction with Autodesk products (AutoCAD, Inventor, Navisworks) Completed university degree in electrical or mechanical engineering or comparable fields, alternatively completed training as a technician with correspondingly relevant professional experience Long-term experience in execution of large-scale plants as well as experience in project management (cost, quality, time) Basic knowledge of power systems and high-voltage technology
22/04/2024
Project-based
Experience: 6 -12 years Tools: AutoCAD, Revit, Navisworks Domain: HVDC/Substation/FACTS Responsibilities: Responsible for the design of the plant layout of HVDC and FACTS system considering customer specification, country-specific standards and EHS requirements Technical lead of an interdisciplinary project team including all stakeholders involved in the design processes. Responsible for the design of the overall plant layout in 3D considering BIM methodologies Technical negotiations with customers, engineering services and suppliers as well as contact person for the construction sites, preferably on site Cost calculation, scheduling, and design of the whole primary engineering for HVDC & FACTS systems, including electromagnetic calculations, studies (noise emissions, earthing, lightning protection) and material specifications Qualification: Knowledge in the field of standards for the design of power systems with a.c. voltages > 1 kV and d.c. voltage >1,5 kV as well as in 3D construction with Autodesk products (AutoCAD, Inventor, Navisworks) Completed university degree in electrical or mechanical engineering or comparable fields, alternatively completed training as a technician with correspondingly relevant professional experience Long-term experience in execution of large-scale plants as well as experience in project management (cost, quality, time) Basic knowledge of power systems and high-voltage technology
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
22/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
Request Technology - Craig Johnson
Chicago, Illinois
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)
22/04/2024
Full time
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Senior .NET Product Engineer with Azure experience. Candidate will be responsible for delivering custom business solutions using the Microsoft technology stack. The individual will lead and coordinate projects from a technology perspective, following secure SDLC activities and standards that are consistent with best practices. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Responsibilities: Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Work, as directed, with business owners, other IT teams, and vendors to create integrations both to/from vendors. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Effectively listens to understand and articulates technical and non-technical information (both written and oral formats) to customers, peers and/or management in a one-on-one or team context with some oversight. Provides production support activities, including advanced technical writing. Documents small to medium scale projects with some supervision, and may be involved in developing and delivering presentations to aid in custom product development decision making. Manages organizational development by dissecting complex situations and refocusing on the most critical technology tasks. Contributes through technical expertise/professional experience in solving problems and/or delivering on opportunities facing the team or group. Provides feedback to management on strategic recommendations. Fosters environment of innovation and change. Aligns changes with the organization's strategic direction and objectives and customer expectations. Recognizes the scope of problems and understands the impact of changes on others. Identifies short and long-range organizational needs. Creates a clear focus on internal and external customer needs. Qualifications: Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Must possess requirement and component level estimation, database design and development skills. Experience in a law firm or global professional services environment preferred. Knowledge of Microsoft Azure technologies. Working with low code platforms like IntApp platform is a plus. Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Technologies: Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture. Advanced Awareness of the Software Development Life Cycle and development methodology (ie Scrum Agile)
*Hybrid, 3 days onsite, 2 days remote* *We are unable to sponsor as this is a permanent Full time role* A prestigious company is looking for a Sr. .NET Product Engineer. This engineer will be doing full stack custom application development. They will work with .Net, C#, MVC, Javascript, jQuery, HTML 5, etc. Responsibilities: The Sr .NET Product Engineer I is responsible for delivering custom business solutions using the Microsoft technology stack. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Qualifications & Requirements A Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Technologies/Software Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture.
20/04/2024
Full time
*Hybrid, 3 days onsite, 2 days remote* *We are unable to sponsor as this is a permanent Full time role* A prestigious company is looking for a Sr. .NET Product Engineer. This engineer will be doing full stack custom application development. They will work with .Net, C#, MVC, Javascript, jQuery, HTML 5, etc. Responsibilities: The Sr .NET Product Engineer I is responsible for delivering custom business solutions using the Microsoft technology stack. The individual will drive the design and development of user interfaces, business objectives and overall infrastructure. Analyze, design, configure, develop and implement intermediate-level solutions to meet business needs and objectives. Provide Level 3 support. Investigates operational or systematic problems and provides resolution using intermediate analytical skills and tools as necessary. Prepare project proposals and develop project plans. May lead small projects. Maintain up-to-date awareness of current and future directions of business industry and associated technologies. Investigate and document present procedures as liaison with user departments. May develop and maintain application security, design and documentation according to legal compliance requirements. Qualifications & Requirements A Bachelor's Degree is preferred in mechanical, computer, or electrical engineering discipline. 8 plus years of software development experience with 6 plus years of web-based software development in .NET technologies (C#, .NET Framework, .NET Core, Docker, MVC, SQL Server). Prior experience developing MSOffice add-Ins in Word, Outlook and Excel Prior experience with ASP.NET MVC (versions 4 and up), .NET Core, WCF, Restful services, JavaScript, jQuery, HTML5/CSS3, React, responsive design, and Dependency Injection frameworks are desired. Experience with ORM with different tools such as Entity Framework and LINQ. Experience working with container-based solutions Experience with continuous integration with Azure DevOps, Git (or similar). Should have strong understanding of SOA, TDD, SOLID principles, and systems architecture concepts. Must be familiar with agile or other iterative development methodologies. Technologies/Software Must understand Microsoft Windows Operating system architecture Must understand Microsoft Windows Office System Ability to participate in all aspects of application SDLC including Agile methodologies Must have experience the Microsoft Visual Studio and ADO Must participate in daily team scrums and code reviews Must understand Microsoft SQL Server Microsoft Visual Studio 2019/2021 Azure DevOps .NET Framework, .NET Core, Rest API services, WCF Services C#, VB.NET, JQuery, JavaScript, Typescript, React, LINQ, HTML5, CSS3, Bootstrap SQL Server, PostgreSQL Docker MVC Framework Entity Framework Knowledge of SOA (Service Oriented Architecture) and N-Tier Architecture.
Position Available: Mechanical Manufacturing Technician Location: Bristol (Hybrid) & Dynamic Working Hours Salary: Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed: Experience in systems design and engineering, including defining requiirements and supporting product development. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Proving Engineer to work in our team. In this role you will support the team in: Supporting the product development team on their full development life cycle. Ensuring the final products meets customer requirements Producing and Supporting definition and success criteria Communicating best practice to other team members. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
19/04/2024
Full time
Position Available: Mechanical Manufacturing Technician Location: Bristol (Hybrid) & Dynamic Working Hours Salary: Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed: Experience in systems design and engineering, including defining requiirements and supporting product development. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Proving Engineer to work in our team. In this role you will support the team in: Supporting the product development team on their full development life cycle. Ensuring the final products meets customer requirements Producing and Supporting definition and success criteria Communicating best practice to other team members. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
A global medical device company are looking for a Mechanical Engineer to join their Engineering team on a contract basis. Your role will be to help design and develop their products. Understanding everything that is required to build prints, put in specifications, tolerances and best practices. More focus will be around how you design the system that is going to work. Have a system design but the role is all about optimisation. A combination of devising tests, revising, analysis of the tests and providing further direction. Essential skills: Designing experience Testing experience Data analysis experience Writing design specifications Desirable skills: Medical device or other regulated industry experience Microfluidics experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
19/04/2024
Project-based
A global medical device company are looking for a Mechanical Engineer to join their Engineering team on a contract basis. Your role will be to help design and develop their products. Understanding everything that is required to build prints, put in specifications, tolerances and best practices. More focus will be around how you design the system that is going to work. Have a system design but the role is all about optimisation. A combination of devising tests, revising, analysis of the tests and providing further direction. Essential skills: Designing experience Testing experience Data analysis experience Writing design specifications Desirable skills: Medical device or other regulated industry experience Microfluidics experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Position: Manufacturing Operations Engineer Location: Derby, UK Employment: Full-time Are you passionate about driving manufacturing excellence within a dynamic engineering environment? We are seeking a talented individual to join our team as a Manufacturing Operations Engineer. You'll play a crucial role in supporting projects related to manufactured hardware, contributing to the success of our cutting-edge initiatives in the aerospace industry. Key Responsibilities: Manage Bill of Materials: Create, update, and maintain BoMs and associated MOE tools while supporting multiple complex projects simultaneously. Technical Interface: Serve as a liaison between purchasing, design, manufacturing, and quality departments, ensuring seamless collaboration and alignment of objectives. Supplier Relationship Management: Develop and nurture supplier relationships, documenting lessons learned to enhance design for manufacturing practices. Quality Assurance: Work closely with Quality Engineering to ensure compliance with company quality procedures, addressing any non-conforming material issues promptly and effectively. Project Support: Ensure designs meet manufacturing requirements, set and execute project schedules, and provide regular status updates to stakeholders. Mentorship: Provide guidance and support to junior manufacturing engineers, fostering a collaborative and knowledge-sharing environment within the team. Qualifications & Experience: Bachelor's degree or equivalent experience in Mechanical/Manufacturing Engineering or a related technical field. Demonstrable experience in a manufacturing environment, with a strong understanding of project and manufacturing engineering principles. Proficiency in CAD software is beneficial. Excellent organizational and communication skills, both written and verbal. Ability to deliver technical presentations internally and to external stakeholders. Strong teamwork skills, capable of collaborating effectively within multidisciplinary project teams. Nice to Have: The company is also hiring for a part time Quality Engineer position. Candidates with experience in quality management systems may choose to work a dual role, spending roughly one day per week in the quality function. While this is not essential, it presents an exciting opportunity for individuals seeking additional responsibilities. Join us and embark on a journey of continuous growth and development. As an MOE, you'll have the chance to expand your expertise, take on increasing levels of responsibility, and contribute to groundbreaking advancements in aerospace technology. If this sounds like it matches your skill set, we advise you to apply directly or call Note: All candidates must be eligible to work in the UK.
19/04/2024
Full time
Position: Manufacturing Operations Engineer Location: Derby, UK Employment: Full-time Are you passionate about driving manufacturing excellence within a dynamic engineering environment? We are seeking a talented individual to join our team as a Manufacturing Operations Engineer. You'll play a crucial role in supporting projects related to manufactured hardware, contributing to the success of our cutting-edge initiatives in the aerospace industry. Key Responsibilities: Manage Bill of Materials: Create, update, and maintain BoMs and associated MOE tools while supporting multiple complex projects simultaneously. Technical Interface: Serve as a liaison between purchasing, design, manufacturing, and quality departments, ensuring seamless collaboration and alignment of objectives. Supplier Relationship Management: Develop and nurture supplier relationships, documenting lessons learned to enhance design for manufacturing practices. Quality Assurance: Work closely with Quality Engineering to ensure compliance with company quality procedures, addressing any non-conforming material issues promptly and effectively. Project Support: Ensure designs meet manufacturing requirements, set and execute project schedules, and provide regular status updates to stakeholders. Mentorship: Provide guidance and support to junior manufacturing engineers, fostering a collaborative and knowledge-sharing environment within the team. Qualifications & Experience: Bachelor's degree or equivalent experience in Mechanical/Manufacturing Engineering or a related technical field. Demonstrable experience in a manufacturing environment, with a strong understanding of project and manufacturing engineering principles. Proficiency in CAD software is beneficial. Excellent organizational and communication skills, both written and verbal. Ability to deliver technical presentations internally and to external stakeholders. Strong teamwork skills, capable of collaborating effectively within multidisciplinary project teams. Nice to Have: The company is also hiring for a part time Quality Engineer position. Candidates with experience in quality management systems may choose to work a dual role, spending roughly one day per week in the quality function. While this is not essential, it presents an exciting opportunity for individuals seeking additional responsibilities. Join us and embark on a journey of continuous growth and development. As an MOE, you'll have the chance to expand your expertise, take on increasing levels of responsibility, and contribute to groundbreaking advancements in aerospace technology. If this sounds like it matches your skill set, we advise you to apply directly or call Note: All candidates must be eligible to work in the UK.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
19/04/2024
Project-based
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
19/04/2024
Project-based
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Job Title: Mechanical Design Engineer Location: Peterborough Duration: Contract Pay Rate: £35/hr. Inside IR35 To work for a global leader in petrol and diesel engine manufacturing that offers the widest choice of dependable, cutting-edge power solutions customised to our clients' exact specifications, iO Associates is seeking a Mechanical Design Engineer. Through a global network of distributors and dealers, they provide engines, parts, and service support to the agricultural, construction, industrial, power generating, rental, material handling, and marine sectors. As a team they produce a wide variety of designs (including couplings, flywheels, engine rigging schemes, rigging equipment, canopies, building layouts and many more) to support multi-platform engine testing in ERDC. Many of their designs are bespoke and follow the Caterpillar design practices. Type of work can be a simple design job like designing a plate to designing complex equipment for test bed upgrades and engine testing. Required Skills CREO and Teamcenter proficiency for design. Basic AutoCAD. Relevant calculations where necessary. (Bolts stress calculations, Shaft suitability etc) Lead design reviews and participate in design discussions and reviews. Wider system knowledge. (Example: - coupling design (Impact of inertia), Look at the bigger picture) Built in safety as part of design. Conducting FMEA, SFMEA & safety risk assessments. Approachable and friendly with a focus on efficiency and velocity. This is an urgent requirement, so if this is of interest, please reply with an up to date CV for more info.
19/04/2024
Project-based
Job Title: Mechanical Design Engineer Location: Peterborough Duration: Contract Pay Rate: £35/hr. Inside IR35 To work for a global leader in petrol and diesel engine manufacturing that offers the widest choice of dependable, cutting-edge power solutions customised to our clients' exact specifications, iO Associates is seeking a Mechanical Design Engineer. Through a global network of distributors and dealers, they provide engines, parts, and service support to the agricultural, construction, industrial, power generating, rental, material handling, and marine sectors. As a team they produce a wide variety of designs (including couplings, flywheels, engine rigging schemes, rigging equipment, canopies, building layouts and many more) to support multi-platform engine testing in ERDC. Many of their designs are bespoke and follow the Caterpillar design practices. Type of work can be a simple design job like designing a plate to designing complex equipment for test bed upgrades and engine testing. Required Skills CREO and Teamcenter proficiency for design. Basic AutoCAD. Relevant calculations where necessary. (Bolts stress calculations, Shaft suitability etc) Lead design reviews and participate in design discussions and reviews. Wider system knowledge. (Example: - coupling design (Impact of inertia), Look at the bigger picture) Built in safety as part of design. Conducting FMEA, SFMEA & safety risk assessments. Approachable and friendly with a focus on efficiency and velocity. This is an urgent requirement, so if this is of interest, please reply with an up to date CV for more info.
A Lead Electronic Design Engineer is now needed for a rapidly growing Engineering company based in Sheffield. The company are working within a niche industry and you will be working on their two main products working with sensors as well as putting forward your ideas for the next gen of their products. As their Lead Electronic Design Engineer you will have had significant experience 5+ years in working in industry throughout the full product life cycle designing in both analogue and digital design. This is a great role if you are looking to work for a company who are looking to hear your thoughts and take on board your advice on best technologies process and implementation as you would be the expert leasing with Firmware, software and mechanical. Therefore you have a high level of autonomy over how the projects are undertaken and best practice for a company who will fully support you. The company offer Hybrid Working with 3 days on site ideally per week as well as flexible working and a host of other benefits. Core skills include:- - Analogue/Digital design - Microcontrollers - Schematics - Design for EMC - PCB Design - Altium - Ability to lead projects - End to End Product life cycle Desirable skills include:- * Firmware * C programming I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
19/04/2024
Full time
A Lead Electronic Design Engineer is now needed for a rapidly growing Engineering company based in Sheffield. The company are working within a niche industry and you will be working on their two main products working with sensors as well as putting forward your ideas for the next gen of their products. As their Lead Electronic Design Engineer you will have had significant experience 5+ years in working in industry throughout the full product life cycle designing in both analogue and digital design. This is a great role if you are looking to work for a company who are looking to hear your thoughts and take on board your advice on best technologies process and implementation as you would be the expert leasing with Firmware, software and mechanical. Therefore you have a high level of autonomy over how the projects are undertaken and best practice for a company who will fully support you. The company offer Hybrid Working with 3 days on site ideally per week as well as flexible working and a host of other benefits. Core skills include:- - Analogue/Digital design - Microcontrollers - Schematics - Design for EMC - PCB Design - Altium - Ability to lead projects - End to End Product life cycle Desirable skills include:- * Firmware * C programming I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Bristol (minimum 3 days in the office), with occasional travel to France 40 hours per week Monday - Friday Private Healthcare & Pension Project Manager (Control Service) The role As Project Manager, you will be responsible for assisting with several of the below listed activities depending on the job/project requirements and the competences and experience: Manage the deployment of the Piping Execution Designer, having a holistic view of: Execution designers tools EDF IT Servers' readiness Technical tests Coactivity open points Contractual aspects Change Management Reintegration by Bilfinger process and tests Deployment coordination Ensure the transfer of HVAC Execution Designer scope is "reintegrated" into the EPR-E Master 3D Model Continuous improvement of engineering sequence, once Execution Designers are working in the EPR-E Master 3D Model Working with Model Managers, to ensure Execution Designers are complying with modelling rules, and working to the expected quality Cost and budget management Skills Required Essential Qualifications, Experience and Skills Comfortable and confident to highlight issues and bring a wide range of stakeholders together to find pragmatic resolutions that satisfy all stakeholders, balancing the needs across the HPC integrated team Enjoys a challenging technical environment with multiple and urgent demands Is able to seek clarification from multiple stakeholders in order to prioritize, paying attention to the wider context and bigger picture to inform their decisions to minimize schedule and cost implications Experience in one or several areas of engineering: Layout, HVAC, Piping, Electrical, mechanical, Contracts, Safety etc. Degree qualified in appropriate technical discipline Fluent English Desirable qualifications, experience and skills: Previous experience working with 3D design software (eg Navisworks, AutoCAD, PDMS and/or E3D) Knowledge and understanding of HVAC, Piping & general layout rules for an industrial project Previous nuclear experience French language skills Adecco - AKKA is acting as an Employment Agency in relation to this vacancy.
18/04/2024
Full time
Bristol (minimum 3 days in the office), with occasional travel to France 40 hours per week Monday - Friday Private Healthcare & Pension Project Manager (Control Service) The role As Project Manager, you will be responsible for assisting with several of the below listed activities depending on the job/project requirements and the competences and experience: Manage the deployment of the Piping Execution Designer, having a holistic view of: Execution designers tools EDF IT Servers' readiness Technical tests Coactivity open points Contractual aspects Change Management Reintegration by Bilfinger process and tests Deployment coordination Ensure the transfer of HVAC Execution Designer scope is "reintegrated" into the EPR-E Master 3D Model Continuous improvement of engineering sequence, once Execution Designers are working in the EPR-E Master 3D Model Working with Model Managers, to ensure Execution Designers are complying with modelling rules, and working to the expected quality Cost and budget management Skills Required Essential Qualifications, Experience and Skills Comfortable and confident to highlight issues and bring a wide range of stakeholders together to find pragmatic resolutions that satisfy all stakeholders, balancing the needs across the HPC integrated team Enjoys a challenging technical environment with multiple and urgent demands Is able to seek clarification from multiple stakeholders in order to prioritize, paying attention to the wider context and bigger picture to inform their decisions to minimize schedule and cost implications Experience in one or several areas of engineering: Layout, HVAC, Piping, Electrical, mechanical, Contracts, Safety etc. Degree qualified in appropriate technical discipline Fluent English Desirable qualifications, experience and skills: Previous experience working with 3D design software (eg Navisworks, AutoCAD, PDMS and/or E3D) Knowledge and understanding of HVAC, Piping & general layout rules for an industrial project Previous nuclear experience French language skills Adecco - AKKA is acting as an Employment Agency in relation to this vacancy.
Senior Mechanical Engineer (Power & Propulsion) As a Senior Mechanical Engineer specializing in Power & Propulsion, you will be part of a team heavily involved in the construction of naval ships for the Royal Navy. Your role will entail regular presence on the ship to support equipment installation through to commissioning, contributing to a small specialized department with minimal turnover. The team collaborates on multiple ship programs, spanning 2, 3, and 4 ships, with additional engagement in projects involving export contracts. What you'll be doing: Participate in developing, maintaining and modifying engineering processes and procedures in assigned areas in response to technical developments and operational need Carry out specialist technical analyses and investigations, including evaluation and selection of technical options, and prepare reports with suggested recommendations to support the resolution of problems and the improvement of engineering capability Prepare specifications, develop designs in line with specifications and all quality and technical standards, and carry out design appraisals in assigned areas to ensure all standards are maintained Carry out investigations into operational problems or developments and develop and prepare solutions, individually or as a member of a project team Support the Principal engineer as the specialist point of contact with customers and/or suppliers in assigned areas on engineering matters, to resolve problems and issues and to maintain awareness in both parties of priorities and objectives Support the identification of business opportunities and the preparation of bids in area(s) of expertise to facilitate the development of the highest quality bids Provide help and direction to less experienced team members to support both their effective working and their development Make engineering decisions within own sphere of responsibility Your skills and experiences: Essential: Degree qualified in an engineering or other related discipline A minimum of IEng registration as the criterion, with a preference for CEng or actively progressing towards CEng Extensive experience in engineering or a defence related industry Desirable: Abilities such as effective verbal and written communication, along with experience and proficiency in software applications like MS Office, AutoCAD, Foran, etc. Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive.
18/04/2024
Full time
Senior Mechanical Engineer (Power & Propulsion) As a Senior Mechanical Engineer specializing in Power & Propulsion, you will be part of a team heavily involved in the construction of naval ships for the Royal Navy. Your role will entail regular presence on the ship to support equipment installation through to commissioning, contributing to a small specialized department with minimal turnover. The team collaborates on multiple ship programs, spanning 2, 3, and 4 ships, with additional engagement in projects involving export contracts. What you'll be doing: Participate in developing, maintaining and modifying engineering processes and procedures in assigned areas in response to technical developments and operational need Carry out specialist technical analyses and investigations, including evaluation and selection of technical options, and prepare reports with suggested recommendations to support the resolution of problems and the improvement of engineering capability Prepare specifications, develop designs in line with specifications and all quality and technical standards, and carry out design appraisals in assigned areas to ensure all standards are maintained Carry out investigations into operational problems or developments and develop and prepare solutions, individually or as a member of a project team Support the Principal engineer as the specialist point of contact with customers and/or suppliers in assigned areas on engineering matters, to resolve problems and issues and to maintain awareness in both parties of priorities and objectives Support the identification of business opportunities and the preparation of bids in area(s) of expertise to facilitate the development of the highest quality bids Provide help and direction to less experienced team members to support both their effective working and their development Make engineering decisions within own sphere of responsibility Your skills and experiences: Essential: Degree qualified in an engineering or other related discipline A minimum of IEng registration as the criterion, with a preference for CEng or actively progressing towards CEng Extensive experience in engineering or a defence related industry Desirable: Abilities such as effective verbal and written communication, along with experience and proficiency in software applications like MS Office, AutoCAD, Foran, etc. Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive.
Engineering Lab Technician - Up to £32,000 per year with Bonus and 6% Pension Contributions. Flexible start finish times. As a Lab Technician you will work in our Test Laboratory which is located at our UK manufacturing plant in Parham, Suffolk. You will support the Research and Development team, working alongside the Product Designers, Application Engineers and Quality team, taking responsibility and ownership for the care and maintenance of the equipment in the test lab, as well as maintaining a clean and tidy work environment, preparing samples for mechanical and environmental testing, undertaking the tests and recording the results. To periodically audit and inspect the performance and attributes of finished products, both made by us and competing products. The role will report into the Director of Research and Development. In return we offer a salary in the range of £25,000 to £32,000 p.a., a discretionary bonus scheme as well as 25 days holiday (plus bank holidays). You will also receive a generous pension scheme, life assurance as well as the chance to take up other benefits including Health Insurance, cycle to work scheme, an employee assistance program, paid time off for volunteer work, plus many others. You will make an impact in the following way: You will be planning, setting up and undertaking controlled tests and trials in accordance with internal Belden Broadband Solutions and international standards. As well as development and management of test procedures and standards. To ensure that all tests and trials are recorded and reported accurately by documenting and presenting results and conclusions of all trials and experience to cross functional teams across Belden. Provide technical support on New Product Development projects. Manage or liaise with 3rd party test houses during outsourced testing. To carry out investigations in a methodical and controlled manner using root-cause investigation into quality issues. Including workmanship, assembly methods, mechanical design and non-conforming material. What you will bring: Experience of working in a manufacturing industry for +3 years is an advantage Experience working in a Test Lab environment within a team English, Mathematics and Sciences GCSEs or equivalent Preferably HNC or BEng Degree in a related discipline. Some physics as a minimum, to understand energy/force/mechanical/environmental aspects of testing. Need to have experience following set instructions/processes and be able to produce reports and collate information/data.
17/04/2024
Full time
Engineering Lab Technician - Up to £32,000 per year with Bonus and 6% Pension Contributions. Flexible start finish times. As a Lab Technician you will work in our Test Laboratory which is located at our UK manufacturing plant in Parham, Suffolk. You will support the Research and Development team, working alongside the Product Designers, Application Engineers and Quality team, taking responsibility and ownership for the care and maintenance of the equipment in the test lab, as well as maintaining a clean and tidy work environment, preparing samples for mechanical and environmental testing, undertaking the tests and recording the results. To periodically audit and inspect the performance and attributes of finished products, both made by us and competing products. The role will report into the Director of Research and Development. In return we offer a salary in the range of £25,000 to £32,000 p.a., a discretionary bonus scheme as well as 25 days holiday (plus bank holidays). You will also receive a generous pension scheme, life assurance as well as the chance to take up other benefits including Health Insurance, cycle to work scheme, an employee assistance program, paid time off for volunteer work, plus many others. You will make an impact in the following way: You will be planning, setting up and undertaking controlled tests and trials in accordance with internal Belden Broadband Solutions and international standards. As well as development and management of test procedures and standards. To ensure that all tests and trials are recorded and reported accurately by documenting and presenting results and conclusions of all trials and experience to cross functional teams across Belden. Provide technical support on New Product Development projects. Manage or liaise with 3rd party test houses during outsourced testing. To carry out investigations in a methodical and controlled manner using root-cause investigation into quality issues. Including workmanship, assembly methods, mechanical design and non-conforming material. What you will bring: Experience of working in a manufacturing industry for +3 years is an advantage Experience working in a Test Lab environment within a team English, Mathematics and Sciences GCSEs or equivalent Preferably HNC or BEng Degree in a related discipline. Some physics as a minimum, to understand energy/force/mechanical/environmental aspects of testing. Need to have experience following set instructions/processes and be able to produce reports and collate information/data.
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £65 per hour (Inside IR35) 12 Month - Contract Key Responsibilities (day to day duties) . Ensuring an understanding of project briefs . Experience in the Design and specification of all Mechanical Building Services systems - heating, cooling, hot and cold water systems, ventilation, controls, etc. . Knowledge of Low Pressure/High Pressure Air, Demin Water, Nitrogen, Local Exhaust Ventilation, Diesel Fuel Supply is not essential but useful. . Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, IES, Hevacomp, in-house developed tools, etc. . Preparing technical specifications using NBS . Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit - note experience of Microstation (& AECOsim) is beneficial . Attendance at meetings with clients and contractors . Site surveys, inspections and monitoring of site works . Report and technical note writing . Maintaining complete records and archives to company standards . Adherence to all quality, environmental and governance processes . Managing elements of project delivery and an understanding of budget costings . Reviewing progress, including reporting any anomalies and changes of scope to the project lead . Contribute to the technical development of junior staff Requirements Essential: . Degree qualified, or equivalent qualification, in Building Services Engineering/Mechanical Engineering or related subjects . Chartered Engineer with CIBSE or IMechE . Familiarity with the principles of building physics such as passive design solutions and fabric first approaches . Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance . Good level of computer literacy in a range of digital tools such as IES thermal modelling package, Navisworks, Hevacomp, One Click, NBS and Microsoft packages Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
17/04/2024
Project-based
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £65 per hour (Inside IR35) 12 Month - Contract Key Responsibilities (day to day duties) . Ensuring an understanding of project briefs . Experience in the Design and specification of all Mechanical Building Services systems - heating, cooling, hot and cold water systems, ventilation, controls, etc. . Knowledge of Low Pressure/High Pressure Air, Demin Water, Nitrogen, Local Exhaust Ventilation, Diesel Fuel Supply is not essential but useful. . Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, IES, Hevacomp, in-house developed tools, etc. . Preparing technical specifications using NBS . Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit - note experience of Microstation (& AECOsim) is beneficial . Attendance at meetings with clients and contractors . Site surveys, inspections and monitoring of site works . Report and technical note writing . Maintaining complete records and archives to company standards . Adherence to all quality, environmental and governance processes . Managing elements of project delivery and an understanding of budget costings . Reviewing progress, including reporting any anomalies and changes of scope to the project lead . Contribute to the technical development of junior staff Requirements Essential: . Degree qualified, or equivalent qualification, in Building Services Engineering/Mechanical Engineering or related subjects . Chartered Engineer with CIBSE or IMechE . Familiarity with the principles of building physics such as passive design solutions and fabric first approaches . Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance . Good level of computer literacy in a range of digital tools such as IES thermal modelling package, Navisworks, Hevacomp, One Click, NBS and Microsoft packages Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
Principal Mechanical Design Engineer - Data Centres Outside IR35 Contract Remote/Hybrid I'm working with a Data Centre Design and Build Consultancy looking for a Principal Mechanical Design Engineer to help support on the design of varying Data Centres in the UK and Europe. This will be a Hybrid working opportunity and is a 6 month contract with a pay rate of around £48-52 per hour Outside IR35 depending on experience. Below are some of the job requirements so you get an understanding of the role: Supporting with the tender work and new bids that come in for Data Centre projects Depending on the client, you'll be producing Mechanical designs across the full RIBA stages, but mostly it'll be doing stage 3 to 4 Designs of Data Centres of varying size. Calculations, specifications, drawings. Working on varying tiers of Data Centres across the UK and Europe If you're interested in applying for the role, please send your up to date CV across to me Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
17/04/2024
Project-based
Principal Mechanical Design Engineer - Data Centres Outside IR35 Contract Remote/Hybrid I'm working with a Data Centre Design and Build Consultancy looking for a Principal Mechanical Design Engineer to help support on the design of varying Data Centres in the UK and Europe. This will be a Hybrid working opportunity and is a 6 month contract with a pay rate of around £48-52 per hour Outside IR35 depending on experience. Below are some of the job requirements so you get an understanding of the role: Supporting with the tender work and new bids that come in for Data Centre projects Depending on the client, you'll be producing Mechanical designs across the full RIBA stages, but mostly it'll be doing stage 3 to 4 Designs of Data Centres of varying size. Calculations, specifications, drawings. Working on varying tiers of Data Centres across the UK and Europe If you're interested in applying for the role, please send your up to date CV across to me Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
An Antenna Design Engineer is required for a predominantly onsite role in Stevenage. Required: * Design and develop RF and microwave antennas which will be used in Datalinks. * Interact with internal customers and suppliers to understand antenna design requirements, volume constraints and environmental specifications so that the final design is compliant with the overall requirements * Provide technical advice and assistance in pursuance of existing and new business, particularly in the fields of Antenna Design Capabilities, RF & Microwave Engineering and ensure the effectiveness and competitiveness of the proposed technical solutions * Diagnose Antenna issues using various methods; eg visual inspection, data analysis in design * Design, simulation & layout using HFSS (understanding limitations of different solvers) * Design and optimisation of array feed networks * Complex Antenna Array simulations/optimisation using HPC/cluster Skillset/experience required: * RF/Microwave Antenna Design (Narrowband and Wideband) * RF/Microwave Antenna Array Design * Antenna test and trials in an anechoic chamber * Manufacturing techniques, capabilities and constraints * Use of vector network analysers and other test equipment * Assessment of installed RCS performance of an Antenna * Awareness of meta-materials technologies * Appreciation of mechanical design & module packaging * Appreciation of mixed signal board techniques * Appreciation of active Microwave, RF and Analogue Design * Clear understanding of engineering tools, processes and procedures * Be conversant with RF/Microwave design tools including HFSS and MATLAB (CST/ADS/FEKO is also desirable but not essential) * Process complex array data using MATLAB * Take early prototype designs into serial production * Be able to write high quality test requirements and test reports * Generate plan of activities and manage own work * Consistent ability to deliver required output within agreed timescales Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
17/04/2024
Project-based
An Antenna Design Engineer is required for a predominantly onsite role in Stevenage. Required: * Design and develop RF and microwave antennas which will be used in Datalinks. * Interact with internal customers and suppliers to understand antenna design requirements, volume constraints and environmental specifications so that the final design is compliant with the overall requirements * Provide technical advice and assistance in pursuance of existing and new business, particularly in the fields of Antenna Design Capabilities, RF & Microwave Engineering and ensure the effectiveness and competitiveness of the proposed technical solutions * Diagnose Antenna issues using various methods; eg visual inspection, data analysis in design * Design, simulation & layout using HFSS (understanding limitations of different solvers) * Design and optimisation of array feed networks * Complex Antenna Array simulations/optimisation using HPC/cluster Skillset/experience required: * RF/Microwave Antenna Design (Narrowband and Wideband) * RF/Microwave Antenna Array Design * Antenna test and trials in an anechoic chamber * Manufacturing techniques, capabilities and constraints * Use of vector network analysers and other test equipment * Assessment of installed RCS performance of an Antenna * Awareness of meta-materials technologies * Appreciation of mechanical design & module packaging * Appreciation of mixed signal board techniques * Appreciation of active Microwave, RF and Analogue Design * Clear understanding of engineering tools, processes and procedures * Be conversant with RF/Microwave design tools including HFSS and MATLAB (CST/ADS/FEKO is also desirable but not essential) * Process complex array data using MATLAB * Take early prototype designs into serial production * Be able to write high quality test requirements and test reports * Generate plan of activities and manage own work * Consistent ability to deliver required output within agreed timescales Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.