Position Available : Digital Electronic Engineer Location : Stevenage - Dynamic Working Hours Salary : Up to £53,000 + Paid Overtime, Company Bonus, Very Good Pension Package and On-site Gym Experience needed : Board level design around FPGA and SoC, interfacing with leading RF systems and developing electronic technical systems. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Digital Electronic Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Ensuring robust electronics design Using development techniques such as DFMEA Proving activities to ensure compliance against requirements Ensuring products meet their quality, rate, and cost targets What we need from you: Ideally, Degree qualified with significant post qualification experience in Electronic Design, development and delivery - preferably in defence or related industry. Excellent problem-solving skills and knowledge of a wide range of electronic technologies and products. Strong communication skills, both written and verbal, with the ability to influence and negotiate with stakeholders across the business. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Digital Electronic Engineer Location : Stevenage - Dynamic Working Hours Salary : Up to £53,000 + Paid Overtime, Company Bonus, Very Good Pension Package and On-site Gym Experience needed : Board level design around FPGA and SoC, interfacing with leading RF systems and developing electronic technical systems. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Digital Electronic Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Ensuring robust electronics design Using development techniques such as DFMEA Proving activities to ensure compliance against requirements Ensuring products meet their quality, rate, and cost targets What we need from you: Ideally, Degree qualified with significant post qualification experience in Electronic Design, development and delivery - preferably in defence or related industry. Excellent problem-solving skills and knowledge of a wide range of electronic technologies and products. Strong communication skills, both written and verbal, with the ability to influence and negotiate with stakeholders across the business. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Electro-Optics Systems) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices and similar. Knowledge of the physics and technologies involved in Electro-Optical systems would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on Electro-Optics (EO) technologies through the provision of specialist EO design support. You will be responsible for driving the technical direction of our products to meet challenging customer requirements by engaging and coordinating with wider specialist design teams and external entities to ensure we successfully deliver on our commitments. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: Requirements analysis, specifications and justification System architecture design and modelling System trade studies to inform design decisions Technology maturation assessments and FMEA Development of interface definitions Systems proving, design assurance and certification Any experience in the following would be a bonus: Knowledge of the physics and technologies involved in Electro-Optical systems Experience of model based engineering techniques, including SysML Use of systems engineering tools (eg IBM DOORS Next, Rhapsody, etc) If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Systems Engineer (Electro-Optics Systems) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices and similar. Knowledge of the physics and technologies involved in Electro-Optical systems would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on Electro-Optics (EO) technologies through the provision of specialist EO design support. You will be responsible for driving the technical direction of our products to meet challenging customer requirements by engaging and coordinating with wider specialist design teams and external entities to ensure we successfully deliver on our commitments. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: Requirements analysis, specifications and justification System architecture design and modelling System trade studies to inform design decisions Technology maturation assessments and FMEA Development of interface definitions Systems proving, design assurance and certification Any experience in the following would be a bonus: Knowledge of the physics and technologies involved in Electro-Optical systems Experience of model based engineering techniques, including SysML Use of systems engineering tools (eg IBM DOORS Next, Rhapsody, etc) If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Electro-Optics Systems) Location : Bristol (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices and similar. Knowledge of the physics and technologies involved in Electro-Optical systems would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on Electro-Optics (EO) technologies through the provision of specialist EO design support. You will be responsible for driving the technical direction of our products to meet challenging customer requirements by engaging and coordinating with wider specialist design teams and external entities to ensure we successfully deliver on our commitments. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: Requirements analysis, specifications and justification System architecture design and modelling System trade studies to inform design decisions Technology maturation assessments and FMEA Development of interface definitions Systems proving, design assurance and certification Any experience in the following would be a bonus: Knowledge of the physics and technologies involved in Electro-Optical systems Experience of model based engineering techniques, including SysML Use of systems engineering tools (eg IBM DOORS Next, Rhapsody, etc) If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Systems Engineer (Electro-Optics Systems) Location : Bristol (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices and similar. Knowledge of the physics and technologies involved in Electro-Optical systems would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on Electro-Optics (EO) technologies through the provision of specialist EO design support. You will be responsible for driving the technical direction of our products to meet challenging customer requirements by engaging and coordinating with wider specialist design teams and external entities to ensure we successfully deliver on our commitments. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: Requirements analysis, specifications and justification System architecture design and modelling System trade studies to inform design decisions Technology maturation assessments and FMEA Development of interface definitions Systems proving, design assurance and certification Any experience in the following would be a bonus: Knowledge of the physics and technologies involved in Electro-Optical systems Experience of model based engineering techniques, including SysML Use of systems engineering tools (eg IBM DOORS Next, Rhapsody, etc) If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Modelling & Tools Team Lead) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics and similar. We are looking for someone with a background in mathematical modelling and coding using tools such as MATLAB and Simulink who also has experience in model verification & validation, configuration control and release processes. Any prior experience of leading a team would be a bonus, although not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to join our Electro-Optical (EO) Seekers & Sensors Department as the Lead for our Modelling and Tools team. The work is broad, multifaceted, varied and dynamically changing. You will work within a highly skilled and experienced team that will support you in delivering our commitments. We will work with you to develop your skill, knowledge and experience, as well as supporting your professional development, all while ensuring a good work-life balance. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Mathematics, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: A background in mathematical modelling and coding using tools such as MathWorks MATLAB and Simulink Experience in model verification & validation, configuration control and release processes. Strong logical and analytical skills to address the technical nature of the work Team Leadership and People Management skills, or a desire to take on this responsibility Additionally, any of the following would be advantageous: Understanding of Electro-Optical radiation, propagation and detection principles, in particular in the infra-red waveband Experience of managing engineering work packages to deliver value outcomes, including co-ordination of other engineering disciplines and subject matter experts Experience of working in AGILE teams and applying AGILE frameworks If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Systems Engineer (Modelling & Tools Team Lead) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics and similar. We are looking for someone with a background in mathematical modelling and coding using tools such as MATLAB and Simulink who also has experience in model verification & validation, configuration control and release processes. Any prior experience of leading a team would be a bonus, although not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to join our Electro-Optical (EO) Seekers & Sensors Department as the Lead for our Modelling and Tools team. The work is broad, multifaceted, varied and dynamically changing. You will work within a highly skilled and experienced team that will support you in delivering our commitments. We will work with you to develop your skill, knowledge and experience, as well as supporting your professional development, all while ensuring a good work-life balance. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Mathematics, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: A background in mathematical modelling and coding using tools such as MathWorks MATLAB and Simulink Experience in model verification & validation, configuration control and release processes. Strong logical and analytical skills to address the technical nature of the work Team Leadership and People Management skills, or a desire to take on this responsibility Additionally, any of the following would be advantageous: Understanding of Electro-Optical radiation, propagation and detection principles, in particular in the infra-red waveband Experience of managing engineering work packages to deliver value outcomes, including co-ordination of other engineering disciplines and subject matter experts Experience of working in AGILE teams and applying AGILE frameworks If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Sensors & Navigation) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Systems Engineer (Sensors & Navigation) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £60,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
People Source Consulting Ltd
Antrim, County Antrim
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
27/03/2024
Full time
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
People Source Consulting Ltd
Antrim, County Antrim
Our client is a leading global IT Solutions provider who are seeking to recruit a Customer Support Engineer/Service Desk Analyst to deliver unique value by collaboratively and reactively solving customer problems, providing proactive support advice, contributing to product quality and enhancements and creating self-help assets to broadly reach more customers. You will be part of a team responsible for providing an outstanding technical support experience to our business customers. From problem identification to full resolution, you will own and manage the customer experience over the phone and Web. Your responsibilities will include the below: Responsible for the customer support experience Own, troubleshoot and solve customer technical issues, using collaboration, troubleshooting best practices and transparency within and across teams (eg swarming) Identify cases that require escalation (either technically or strategically) Create and maintain incident management requests to product group/engineering group Contribute to case deflection initiatives, automation and other digital self-help assets to improve customer/engineer experience Provide ramp activities, knowledge sharing, technical coaching and mentoring Drive technical collaboration & engagement Lead or participate in building communities with peer delivery roles; may be workload or specialty specific Nice to have but not essential Knowledge and demonstrated technical proficiency in SharePoint or Microsoft Teams. General understanding of Microsoft 365 administration principles. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
27/03/2024
Full time
Our client is a leading global IT Solutions provider who are seeking to recruit a Customer Support Engineer/Service Desk Analyst to deliver unique value by collaboratively and reactively solving customer problems, providing proactive support advice, contributing to product quality and enhancements and creating self-help assets to broadly reach more customers. You will be part of a team responsible for providing an outstanding technical support experience to our business customers. From problem identification to full resolution, you will own and manage the customer experience over the phone and Web. Your responsibilities will include the below: Responsible for the customer support experience Own, troubleshoot and solve customer technical issues, using collaboration, troubleshooting best practices and transparency within and across teams (eg swarming) Identify cases that require escalation (either technically or strategically) Create and maintain incident management requests to product group/engineering group Contribute to case deflection initiatives, automation and other digital self-help assets to improve customer/engineer experience Provide ramp activities, knowledge sharing, technical coaching and mentoring Drive technical collaboration & engagement Lead or participate in building communities with peer delivery roles; may be workload or specialty specific Nice to have but not essential Knowledge and demonstrated technical proficiency in SharePoint or Microsoft Teams. General understanding of Microsoft 365 administration principles. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Role: Graduate or Junior PLC Electrical/Electronic Engineer Working Hours: 37.5 per week Location: Dundee, UK (hybrid permitted, 3+ days in the Dundee office required each week) Salary: Competitive About the role: We are seeking a graduate OR Junior PLC Electrical Design Engineer with a keen interest in electrical/electronic design and product development to join our team based in Dundee. The ideal candidate must have experience in electrical and electronic design, and in a degree studied control systems engineering and a natural problem-solving ability. You will work with a variety of products, including biomass cameras, electric stunning systems, acoustic and electric predator deterrents and sea lice removal systems, all designed to improve both operational efficiency and animal welfare standards. Reporting to the Lead Electronics Engineer and working as part of a dynamic and varied engineering team, you will provide electrical design support by preparing and checking design documentation, reviews, estimates and schedules. You will also support the business development process by inputting into tender responses. Experience of the aquaculture, agriculture, marine or offshore industries would be beneficial but is not essential. This role splits its time between hands on and theoretical works, therefore the ability to prioritise and manage your time effectively is essential. What you'll be doing: Develop, review, update and modify electrical design plans and work schedules to meet project requirements. Develop and maintain electrical panel schematics, controls and system schematics for our systems. Manage and check system installations, ensuring that product specification is met and adheres to relevant safety standards. Design, update and maintain user documentation and technical files as necessary, specific to each product. Provide technical support to customer service team. Design product documentation including all specifications, drawings, design calculations, user documents, technical reports, schematics and technical support material. Conduct research and development, performing diagnostics and troubleshooting equipment. Maintain and build trusted relationships with key customers, clients, partners, and stakeholders. The skills will learn as a graduate, so ignore the must haves Must have PLC experience. BSc in Electrical, Electronic or Control Systems Engineering or equivalent experience. Minimum of three years' experience in the design and electro-mechanical systems. Experienced in PLC based control systems, either in ladder logic or "C" based environments. Experience in 3 Phase supply, distribution systems, cable management systems, earthing and bonding designs. Experience in PCB layout and Schematic Entry Excellent PC, MS Office skills, coupled with bespoke programming or design software experience. Good working knowledge of legislation, British Standards, European standards, and international standards. Experienced to work in complex project environments with third-party vendors and subcontractors. Able to analyse data using sound statistical methodology and effectively present technical information. Strong communication, negotiation, interpersonal and influencing skills. Experience in aquaculture, agriculture, marine or offshore industries would be beneficial. Willingness to travel for on-site installation and/or survey. We offer a range of exciting benefits including: 33 days annual leave Death in service at 4 x your annual salary Employee Assistance Programme Enhanced parental leave policies Birthday day off Paid bereavement leave Paid sick leave Company pension scheme How to apply? Please email a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
27/03/2024
Full time
Role: Graduate or Junior PLC Electrical/Electronic Engineer Working Hours: 37.5 per week Location: Dundee, UK (hybrid permitted, 3+ days in the Dundee office required each week) Salary: Competitive About the role: We are seeking a graduate OR Junior PLC Electrical Design Engineer with a keen interest in electrical/electronic design and product development to join our team based in Dundee. The ideal candidate must have experience in electrical and electronic design, and in a degree studied control systems engineering and a natural problem-solving ability. You will work with a variety of products, including biomass cameras, electric stunning systems, acoustic and electric predator deterrents and sea lice removal systems, all designed to improve both operational efficiency and animal welfare standards. Reporting to the Lead Electronics Engineer and working as part of a dynamic and varied engineering team, you will provide electrical design support by preparing and checking design documentation, reviews, estimates and schedules. You will also support the business development process by inputting into tender responses. Experience of the aquaculture, agriculture, marine or offshore industries would be beneficial but is not essential. This role splits its time between hands on and theoretical works, therefore the ability to prioritise and manage your time effectively is essential. What you'll be doing: Develop, review, update and modify electrical design plans and work schedules to meet project requirements. Develop and maintain electrical panel schematics, controls and system schematics for our systems. Manage and check system installations, ensuring that product specification is met and adheres to relevant safety standards. Design, update and maintain user documentation and technical files as necessary, specific to each product. Provide technical support to customer service team. Design product documentation including all specifications, drawings, design calculations, user documents, technical reports, schematics and technical support material. Conduct research and development, performing diagnostics and troubleshooting equipment. Maintain and build trusted relationships with key customers, clients, partners, and stakeholders. The skills will learn as a graduate, so ignore the must haves Must have PLC experience. BSc in Electrical, Electronic or Control Systems Engineering or equivalent experience. Minimum of three years' experience in the design and electro-mechanical systems. Experienced in PLC based control systems, either in ladder logic or "C" based environments. Experience in 3 Phase supply, distribution systems, cable management systems, earthing and bonding designs. Experience in PCB layout and Schematic Entry Excellent PC, MS Office skills, coupled with bespoke programming or design software experience. Good working knowledge of legislation, British Standards, European standards, and international standards. Experienced to work in complex project environments with third-party vendors and subcontractors. Able to analyse data using sound statistical methodology and effectively present technical information. Strong communication, negotiation, interpersonal and influencing skills. Experience in aquaculture, agriculture, marine or offshore industries would be beneficial. Willingness to travel for on-site installation and/or survey. We offer a range of exciting benefits including: 33 days annual leave Death in service at 4 x your annual salary Employee Assistance Programme Enhanced parental leave policies Birthday day off Paid bereavement leave Paid sick leave Company pension scheme How to apply? Please email a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
West Virginia Network for Educational Telecomputing (WVNET)
Morgantown, West Virginia
WVNET is seeking to hire a new Telecommunications Network Specialist III to analyze, design, configure, install, deploy and troubleshoot LAN, WAN, Campus networks (mainly Cisco Routers, Switches, Firewalls), associated wireless infrastructure (Extreme, Meraki), VOIP solutions (CUCM, SIP trunks, UCaaS), System Monitoring (SolarWinds NPM) and remote access (VPN ASA, AAA, TACACS, RADIUS), cloud (OCI, Azure, AWS) and associated ongoing maintenance and updating of related hardware and software. This role will address critical organizational needs by: Resolving Technical Debt: Modernizing equipment, eliminating Legacy protocols, and optimizing configurations for improved network performance, reliability, and security. Managing Workload and Complexity: Strategizing to efficiently handle increased operations, new technologies, and remote work demands. Enhancing Security: Implementing next-gen Firewalls, intrusion detection systems, and security protocols to help safeguard our network against cyberattacks, data breaches, and other security risks. Specialized Network Skills: Utilize their specialized skills and expertise, particularly with the ever-evolving Cisco platforms and other network vendor languages, cloud/hybrid computing, Network Function Virtualization among others to optimize network performance. The ideal candidate will be self-motivated, able to multitask and enjoy problem solving. Candidate will be given lead on tasks and assignments to include working daily with local and remote technical and non-technical staff (Network Engineers, DBA's, System Admins, Computer Center Directors, Supreme Court Judges and Clerks, Tax Assessors, Vendors, etc.) to analyze and correct network-related issues. Work Location: Morgantown, WV, 26505 (on-site work required) Classification: Salary, Non-Classified, Full-Time Benefits, FLSA Exempt SALARY/BENEFITS Starting annual salary range is $70,000 - $80,000 plus excellent State of WV Employee benefits : health insurance, dental, vision, hearing, Health Savings Accounts/Flexible Spending Accounts, retirement investing, and life insurance plans, short-term/long-term disability insurance, as well as, generous amounts of vacation, sick, state & federal holidays, and professional development opportunities. MINIMUM EDUCATION Bachelor's Degree in Telecommunications, Electronics, Computer Science, or related field; or, equivalent professional experience in lieu of degree. MINIMUM EXPERIENCE.Details of relevant experience must be shown in your resume* Required - 6 to 8 years of progressively increasing experience and training in fields closely related to data communication or networking. Required - Cisco Certified Network Professional (CCNP) or Cisco Certified Network Associate (CCNA) with at least 5 years of relevant experience is preferred. Required - 6 to 8 years of hands-on experience is necessary to understand the complex interaction of communication protocols, computer-based networking equipment and associated wiring and electronics required to support the high-speed data transmission demanded by modern communications networks. Demonstrated hands-on proficiency with the Cisco CLI is a must. JOB DUTIES/RESPONSIBILITIES Maintaining and upgrading as needed multiple Operating Systems (Windows, Macintosh, Linux, Windows Server running on desktops, laptops, VMs) and their network-related software (Wireshark, Snort, TMS, ASDM, NMAP, etc.) as well as work to setup, troubleshooting and teardown wired and wireless networks at hotels and similar venues for statewide education & technology-related conferences, and occasional travel to all 55 WV counties (as well as Pittsburgh, PA and Columbus, OH) as needed to install, replace and maintain networking equipment. The Telecommunications Network Specialist III position will also provide training and guidance to TNS I's and TNS II's staff. All telecommunication positions are on call to respond to network emergencies 24/7/365. KNOWLEDGE/SKILLS/ABILITIES Problems encountered require considerable analytical and research skills coupled with an extensive knowledge base of the technology equipment used across the state unified network. Various systems are in use by WVNET and customers, which compounds the problems in providing network services. The design and implementation of new and/or integrated systems requires an in-depth knowledge of both the users' needs and the technologies available to achieve the desired results. Effective, clear and concise communication is the key to understanding the customer's requirements and creating a path forward. The ability to collaborate with teams of people over weeks and months on multiple and technical projects at once. Projects which have many moving parts' and which require accurate and detailed planning and research to avoid system and network outages of mission critical systems. Thorough knowledge of : Internet TCP/IP protocols, both IPv4 and IPv6; LAN and WAN configuration and interconnections; configuring port-channels, BVIs, SVI's and associated configuration; Routers, Switches, Firewalls, wireless access points, VPN and VOIP technologies; building telecommunications wiring, termination and cabling systems. Demonstrated abilities/skills to: think logically in problem troubleshooting while under stress; communication (both verbal/written) to technical and non-technical audiences; meet deadlines; work accurately and follow lengthy, specific directions; use creativity and imagination in technical problem solving; understand complex technical manuals and concepts; script/code in a programming language relevant to networking, whether for doing configuration management, automation, orchestration, monitoring, or management in general. PHYSICAL DEMANDS Frequently, perform two-person dead-lift large communications chassis weighing up to 200 lbs. For example, a Cisco 6509-E weighs between 60lbs empty up to 190lbs loaded, and has exactly 2 handles. Occasional travel to remote location for technical assistance. Often, especially when working at a remote location, there are only 2 people on the team. Therefore, telecommunication specialists must be able to lift and hold smaller Switches/Routers/Servers while the other person screws the brackets to the rack. It's basically a standing shoulder press of between 10 to 25 pounds. Frequently, physically crawl on the floor in order to run cabling beneath sub-floor, as well as climb ladders to work overhead, often above ceiling tiles. EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER/VETERANS/DISABLED The West Virginia Network for Educational Telecomputing (WVNET) is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, or protected veteran status and will not be discriminated against on the basis of disability. WVNET provides a collegial, respectful and inclusive environment that values the diversity, creativity and contributions of its staff.
27/03/2024
Full time
WVNET is seeking to hire a new Telecommunications Network Specialist III to analyze, design, configure, install, deploy and troubleshoot LAN, WAN, Campus networks (mainly Cisco Routers, Switches, Firewalls), associated wireless infrastructure (Extreme, Meraki), VOIP solutions (CUCM, SIP trunks, UCaaS), System Monitoring (SolarWinds NPM) and remote access (VPN ASA, AAA, TACACS, RADIUS), cloud (OCI, Azure, AWS) and associated ongoing maintenance and updating of related hardware and software. This role will address critical organizational needs by: Resolving Technical Debt: Modernizing equipment, eliminating Legacy protocols, and optimizing configurations for improved network performance, reliability, and security. Managing Workload and Complexity: Strategizing to efficiently handle increased operations, new technologies, and remote work demands. Enhancing Security: Implementing next-gen Firewalls, intrusion detection systems, and security protocols to help safeguard our network against cyberattacks, data breaches, and other security risks. Specialized Network Skills: Utilize their specialized skills and expertise, particularly with the ever-evolving Cisco platforms and other network vendor languages, cloud/hybrid computing, Network Function Virtualization among others to optimize network performance. The ideal candidate will be self-motivated, able to multitask and enjoy problem solving. Candidate will be given lead on tasks and assignments to include working daily with local and remote technical and non-technical staff (Network Engineers, DBA's, System Admins, Computer Center Directors, Supreme Court Judges and Clerks, Tax Assessors, Vendors, etc.) to analyze and correct network-related issues. Work Location: Morgantown, WV, 26505 (on-site work required) Classification: Salary, Non-Classified, Full-Time Benefits, FLSA Exempt SALARY/BENEFITS Starting annual salary range is $70,000 - $80,000 plus excellent State of WV Employee benefits : health insurance, dental, vision, hearing, Health Savings Accounts/Flexible Spending Accounts, retirement investing, and life insurance plans, short-term/long-term disability insurance, as well as, generous amounts of vacation, sick, state & federal holidays, and professional development opportunities. MINIMUM EDUCATION Bachelor's Degree in Telecommunications, Electronics, Computer Science, or related field; or, equivalent professional experience in lieu of degree. MINIMUM EXPERIENCE.Details of relevant experience must be shown in your resume* Required - 6 to 8 years of progressively increasing experience and training in fields closely related to data communication or networking. Required - Cisco Certified Network Professional (CCNP) or Cisco Certified Network Associate (CCNA) with at least 5 years of relevant experience is preferred. Required - 6 to 8 years of hands-on experience is necessary to understand the complex interaction of communication protocols, computer-based networking equipment and associated wiring and electronics required to support the high-speed data transmission demanded by modern communications networks. Demonstrated hands-on proficiency with the Cisco CLI is a must. JOB DUTIES/RESPONSIBILITIES Maintaining and upgrading as needed multiple Operating Systems (Windows, Macintosh, Linux, Windows Server running on desktops, laptops, VMs) and their network-related software (Wireshark, Snort, TMS, ASDM, NMAP, etc.) as well as work to setup, troubleshooting and teardown wired and wireless networks at hotels and similar venues for statewide education & technology-related conferences, and occasional travel to all 55 WV counties (as well as Pittsburgh, PA and Columbus, OH) as needed to install, replace and maintain networking equipment. The Telecommunications Network Specialist III position will also provide training and guidance to TNS I's and TNS II's staff. All telecommunication positions are on call to respond to network emergencies 24/7/365. KNOWLEDGE/SKILLS/ABILITIES Problems encountered require considerable analytical and research skills coupled with an extensive knowledge base of the technology equipment used across the state unified network. Various systems are in use by WVNET and customers, which compounds the problems in providing network services. The design and implementation of new and/or integrated systems requires an in-depth knowledge of both the users' needs and the technologies available to achieve the desired results. Effective, clear and concise communication is the key to understanding the customer's requirements and creating a path forward. The ability to collaborate with teams of people over weeks and months on multiple and technical projects at once. Projects which have many moving parts' and which require accurate and detailed planning and research to avoid system and network outages of mission critical systems. Thorough knowledge of : Internet TCP/IP protocols, both IPv4 and IPv6; LAN and WAN configuration and interconnections; configuring port-channels, BVIs, SVI's and associated configuration; Routers, Switches, Firewalls, wireless access points, VPN and VOIP technologies; building telecommunications wiring, termination and cabling systems. Demonstrated abilities/skills to: think logically in problem troubleshooting while under stress; communication (both verbal/written) to technical and non-technical audiences; meet deadlines; work accurately and follow lengthy, specific directions; use creativity and imagination in technical problem solving; understand complex technical manuals and concepts; script/code in a programming language relevant to networking, whether for doing configuration management, automation, orchestration, monitoring, or management in general. PHYSICAL DEMANDS Frequently, perform two-person dead-lift large communications chassis weighing up to 200 lbs. For example, a Cisco 6509-E weighs between 60lbs empty up to 190lbs loaded, and has exactly 2 handles. Occasional travel to remote location for technical assistance. Often, especially when working at a remote location, there are only 2 people on the team. Therefore, telecommunication specialists must be able to lift and hold smaller Switches/Routers/Servers while the other person screws the brackets to the rack. It's basically a standing shoulder press of between 10 to 25 pounds. Frequently, physically crawl on the floor in order to run cabling beneath sub-floor, as well as climb ladders to work overhead, often above ceiling tiles. EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER/VETERANS/DISABLED The West Virginia Network for Educational Telecomputing (WVNET) is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, or protected veteran status and will not be discriminated against on the basis of disability. WVNET provides a collegial, respectful and inclusive environment that values the diversity, creativity and contributions of its staff.
Job title: Hardware Engineer Location: Scotland Job type: Permanent Salary: £35-40k per annum iO Associates is seeking a Hardware Engineer to work with a leader in the realm of test automation technologies for the data storage sector and other industries. Working on cutting edge technology for Data Centres, Telecoms, Self-Driving Cars, AI, and numerous more applications, we collaborate with the largest IT businesses in the world. We are looking for a Hardware Engineer who would be in charge of development throughout the whole product life cycle and collaborate with a small, knowledgeable team of hardware and software developers. Required: Electrical engineering degree or its equivalent is necessary. 1-2 years' minimum of relevant industry experience would be anticipated. A foundational understanding of electronics theory is necessary, as well as PCB layout and schematic design. Exposure to FPGA Development. Responsibilities: PCB design, schematics, and product definition. Device validation, manufacturing test development, and signal integrity analysis. Documentation pertaining to customers and internally. comprehension of field failures and RMA analysis. FPGA Design. This is a role with visits to the site. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth and career development throughout the organisation. Please apply on the link below or contact us if you want to know more about the role and company.
26/03/2024
Full time
Job title: Hardware Engineer Location: Scotland Job type: Permanent Salary: £35-40k per annum iO Associates is seeking a Hardware Engineer to work with a leader in the realm of test automation technologies for the data storage sector and other industries. Working on cutting edge technology for Data Centres, Telecoms, Self-Driving Cars, AI, and numerous more applications, we collaborate with the largest IT businesses in the world. We are looking for a Hardware Engineer who would be in charge of development throughout the whole product life cycle and collaborate with a small, knowledgeable team of hardware and software developers. Required: Electrical engineering degree or its equivalent is necessary. 1-2 years' minimum of relevant industry experience would be anticipated. A foundational understanding of electronics theory is necessary, as well as PCB layout and schematic design. Exposure to FPGA Development. Responsibilities: PCB design, schematics, and product definition. Device validation, manufacturing test development, and signal integrity analysis. Documentation pertaining to customers and internally. comprehension of field failures and RMA analysis. FPGA Design. This is a role with visits to the site. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth and career development throughout the organisation. Please apply on the link below or contact us if you want to know more about the role and company.
Job Title: Manufacturing Engineer - Electromechanical or Electronic Location: Farnborough, UK Contract Duration: 12 months, contract Essential Functions/Responsibilities: 1. Support the Shop Floor in troubleshooting (eg PCBA fault finding); disposition of Non-Conformance Reports (eg Rework/Return to Vendor/Scrap) 2. Support the Shop floor in reducing the Standard Cost and Lead Time of a product. 3. Support Supplier improvement activities 4. Develop manufacturing processes for New Product Introduction and production tools. 5. Ability to use statistical analysis to identify trends and identify cause and effect relationships Skills: 1. Create/Update Manufacturing Documentation (Assembly/Test Instructions) 2. Design necessary fixtures; tooling; test boxes 3. Apply LEAN manufacturing techniques to eliminate/reduce WASTE 4. Justification and implementation of new equipment Qualifications: A Degree in Engineering is preferred. However, the minimum required would be an HNC in an electronics discipline. Desired Characteristics: 1. A minimum of min years' experience in a Manufacturing, or Production Engineering role which includes providing Shop Floor support. 2. Ability to analyse problems, identify root causes and provide efficient solutions, fault find down to component level as required. 3. DOE testing to determine the factors effecting inputs and outputs. 4. Six Sigma, Shainin experience 5. Ability to work cross functionally and the ability to prioritise multiple projects. 6. IPC Class III inspection
26/03/2024
Project-based
Job Title: Manufacturing Engineer - Electromechanical or Electronic Location: Farnborough, UK Contract Duration: 12 months, contract Essential Functions/Responsibilities: 1. Support the Shop Floor in troubleshooting (eg PCBA fault finding); disposition of Non-Conformance Reports (eg Rework/Return to Vendor/Scrap) 2. Support the Shop floor in reducing the Standard Cost and Lead Time of a product. 3. Support Supplier improvement activities 4. Develop manufacturing processes for New Product Introduction and production tools. 5. Ability to use statistical analysis to identify trends and identify cause and effect relationships Skills: 1. Create/Update Manufacturing Documentation (Assembly/Test Instructions) 2. Design necessary fixtures; tooling; test boxes 3. Apply LEAN manufacturing techniques to eliminate/reduce WASTE 4. Justification and implementation of new equipment Qualifications: A Degree in Engineering is preferred. However, the minimum required would be an HNC in an electronics discipline. Desired Characteristics: 1. A minimum of min years' experience in a Manufacturing, or Production Engineering role which includes providing Shop Floor support. 2. Ability to analyse problems, identify root causes and provide efficient solutions, fault find down to component level as required. 3. DOE testing to determine the factors effecting inputs and outputs. 4. Six Sigma, Shainin experience 5. Ability to work cross functionally and the ability to prioritise multiple projects. 6. IPC Class III inspection
Project Technical Lead - Software - Tech/Engineering Sector - Competitive Salary & Excellent Benefits - Paignton Job Title - Project Technical Lead - Software Benefits - Pension, Life Insurance, Health Care, Dental, Gym, Birthday Benefits, 25 days' annual leave, Fitness Classes & Progression Location - Paignton The Client - Curo are Partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The Candidate - The successful candidate will be comfortable in a leadership position, with excellent communication skills. The role requires demonstrable hands-on experience in working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. Experience in developing software applications, eg C++ programming would be very relevant, as well as a proven background in New Product Introduction. This role would suit a candidate from an Engineering background, electronics, scientific, computing, robotics or RF skills and experience would be highly transferrable. The Role - The Project Technical Lead is responsible for all elements of technical project leadership for their assigned projects within the organisations Product development team. This involves leadership of cross functional teams and liaising with various functions throughout the organisation. There may be times when there are conflicting design decisions around project development, so confidence with conflict resolution would stand you in good stead. This role requires Individual contribution towards project delivery. Key Duties - Technical Leadership of projects made up of cross discipline engineers at varying levels of seniority. Coordinate and provide technical input into Product Management Team against customer requirements. Determine technical resource required for project execution. Requirements capture. Work with the organisations Product Realisation Process, including all stages of the product life cycle: Concept, Requirements capture, planning/estimation, detailed design, implementation, qualification, and end of life. Leading design review meetings (including gathering required inputs and completing documentation). Determine validation and qualification requirements working closely with Product verification team. Providing technical leadership to a cross functional team during the design and development of technical projects. Includes need to understand and account for requirements outside of normal discipline (eg HW and non-engineering teams). Work with Project Management Office (PMO) to provide technical updates on project progress, monitor risks and execute Project plans. Make decisions around technical implementation of projects. Work with PMO to manage resource contention. Be an individual contributor within projects in areas of engineering discipline. Consider inputs from all areas of the business required for product launch (eg operations, Global Services, Supply chain, Commercial). Requirements - Degree in Electronic Engineering, Computer Engineering, Computer Science, or a similar discipline. Demonstrable hands-on experience in working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. Demonstrable experience of project technical leadership. Business acumen. Excellent interpersonal communication, problem solving, presentation and analytical skills. Team player with highly collaborative and positive attitude. Eager to learn new technologies, self-motivated, energetic approach. Demonstrable mentoring and training experience. Experience in developing software applications, eg C++ programming. New Product Introduction experience. Knowledge of Project management tools and methods. System level design including hard and soft elements. Software design methodology. Initiative step up and take action without being asked. Look for opportunities to make a difference. Resourcefulness adapt to new/difficult situations and devise ways to overcome obstacles. Decisive, determined, and persistent demonstrating both individual and collective ownership. Leading by example and results oriented focus is on getting to the desired outcome. Ability to both own and lead multi-disciplinary projects through the Project Realisation Process. Consistent approach. Organisational skills. Creativity original/innovative thinker, ability to go beyond traditional approaches. To apply for this Project Technical Lead permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
26/03/2024
Full time
Project Technical Lead - Software - Tech/Engineering Sector - Competitive Salary & Excellent Benefits - Paignton Job Title - Project Technical Lead - Software Benefits - Pension, Life Insurance, Health Care, Dental, Gym, Birthday Benefits, 25 days' annual leave, Fitness Classes & Progression Location - Paignton The Client - Curo are Partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The Candidate - The successful candidate will be comfortable in a leadership position, with excellent communication skills. The role requires demonstrable hands-on experience in working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. Experience in developing software applications, eg C++ programming would be very relevant, as well as a proven background in New Product Introduction. This role would suit a candidate from an Engineering background, electronics, scientific, computing, robotics or RF skills and experience would be highly transferrable. The Role - The Project Technical Lead is responsible for all elements of technical project leadership for their assigned projects within the organisations Product development team. This involves leadership of cross functional teams and liaising with various functions throughout the organisation. There may be times when there are conflicting design decisions around project development, so confidence with conflict resolution would stand you in good stead. This role requires Individual contribution towards project delivery. Key Duties - Technical Leadership of projects made up of cross discipline engineers at varying levels of seniority. Coordinate and provide technical input into Product Management Team against customer requirements. Determine technical resource required for project execution. Requirements capture. Work with the organisations Product Realisation Process, including all stages of the product life cycle: Concept, Requirements capture, planning/estimation, detailed design, implementation, qualification, and end of life. Leading design review meetings (including gathering required inputs and completing documentation). Determine validation and qualification requirements working closely with Product verification team. Providing technical leadership to a cross functional team during the design and development of technical projects. Includes need to understand and account for requirements outside of normal discipline (eg HW and non-engineering teams). Work with Project Management Office (PMO) to provide technical updates on project progress, monitor risks and execute Project plans. Make decisions around technical implementation of projects. Work with PMO to manage resource contention. Be an individual contributor within projects in areas of engineering discipline. Consider inputs from all areas of the business required for product launch (eg operations, Global Services, Supply chain, Commercial). Requirements - Degree in Electronic Engineering, Computer Engineering, Computer Science, or a similar discipline. Demonstrable hands-on experience in working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. Demonstrable experience of project technical leadership. Business acumen. Excellent interpersonal communication, problem solving, presentation and analytical skills. Team player with highly collaborative and positive attitude. Eager to learn new technologies, self-motivated, energetic approach. Demonstrable mentoring and training experience. Experience in developing software applications, eg C++ programming. New Product Introduction experience. Knowledge of Project management tools and methods. System level design including hard and soft elements. Software design methodology. Initiative step up and take action without being asked. Look for opportunities to make a difference. Resourcefulness adapt to new/difficult situations and devise ways to overcome obstacles. Decisive, determined, and persistent demonstrating both individual and collective ownership. Leading by example and results oriented focus is on getting to the desired outcome. Ability to both own and lead multi-disciplinary projects through the Project Realisation Process. Consistent approach. Organisational skills. Creativity original/innovative thinker, ability to go beyond traditional approaches. To apply for this Project Technical Lead permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
Senior Connectivity Firmware/Test Engineer (Bluetooth Low Energy) 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
25/03/2024
Project-based
Senior Connectivity Firmware/Test Engineer (Bluetooth Low Energy) 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
25/03/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
25/03/2024
Full time
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!
25/03/2024
Full time
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!
People Source Consulting Ltd
Antrim, County Antrim
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
22/03/2024
Full time
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Position Available : Navigation Sensors Engineer Location : Bristol (Hybrid) & Dynamic Working Hours Salary : Up to £45,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Understanding of navigation sensor technologies in a defence environment, appreciation of systems design, and working to good engineering practices. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Navigation Sensors Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
22/03/2024
Full time
Position Available : Navigation Sensors Engineer Location : Bristol (Hybrid) & Dynamic Working Hours Salary : Up to £45,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Understanding of navigation sensor technologies in a defence environment, appreciation of systems design, and working to good engineering practices. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Navigation Sensors Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing the teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
22/03/2024
Full time
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing the teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.