Job Title: Head of Production (Water Industry) Location: Green Lane, Walsall or Fulbourn Road, Cambridge (Hybrid - 3dpw in office location) Team : 3 direct reports, total team size 64 employees. Package: To 75k DOE + Company Car/Allowance + Bonus to 10% Travel: Frequent travel to Production sites including Cambridge and Hampton Loade Step into a pivotal role as our Head of Production and lead our passionate production teams to deliver pristine drinking water to communities across South Staffs and Cambridge. Drive transformative strategies that address industry challenges while championing our unwavering commitment to exceptional quality, safety, and environmental stewardship. This influential senior leadership position empowers you to oversee the day-to-day operations of water production and storage, ensuring a reliable and continuous water supply for all. Join us in making a meaningful impact-providing clean, safe water to enhance lives and sustain our communities. About us: At South Staffs Water, we deliver clean and reliable water supplies to around 1.7 million customers within the South Staffs and Cambridge regions. As a water only Company, providing clean, healthy water 24 hours a day, 365 days a year is at the very heart of what we do and that's where you come in. About the role: • Champion Human Organisation Performance (HOP) principles to drive health and safety performance improvements to mitigate critical risk / hazards. • Deliver water quality compliance risk index (CRI) outcome delivery incentive (ODI). • Deliver annual unplanned interruption outcome delivery incentive (ODI). • Deliver maintenance, compliance, and team activities within annual operating expenditure budgets. • Continuous employee engagement, staff retention and team development. The key deliverables: • Effective leadership of Production teams across both operating regions • Management and implementation of industry leading Health & Safety standards associated with all operational staff and sites. • Providing direction, strategies and tracking operational performance to ensure compliance with Defra, EA, HSE, DWI standards. • Liaising with external bodies, auditors, review bodies and regulators • Evaluation of key business processes to ensure internal controls and risk measures are effective. • Ensuring sufficient competent staff are in place and that training is evaluated and maintained at the required standard. • Effectively managing budgets for operational and capital spend • Developing strategies and tactical plans for the risk-based optimisation of maintenance and reactive interventions • Developing strategies for the management of interventions to balance the operational risks of failure. • Overall accountability for Competent Operator Scheme compliance and assurance. • Responsible for water quality compliance risk index (CRI) outcome delivery incentive (ODI). • Being part of emergency/incident standby rota. What you'll need: • Experience of Production leadership roles in a Water/Energy or similar environment • The ability to think strategically, make decisions, and set priorities. • Ability to lead, develop and motivate distributed teams in an agile environment. • Demonstrate well-honed emotional intelligence and communication skills, able to influence and build effective relationships across a range of internal and external stakeholders and act as an ambassador for the business. • Experience of managing operating and capital budgets is essential. • Demonstrate the ability to engage with internal and external stakeholders at a senior level. • Educated to degree level or equivalent experience • NEBOSH Diploma or NVQ Level 5 Diploma in H&S desired. • Hold or working towards Chartership of an Institution desired • Must hold a full UK Driving Licence. What you'll get in return: • Basic salary to £75k DOE • Bonus up to 10% • Car/Car Allowance • Matched pension contributions • Employee assistance and wellbeing programme • Private Health • Retail discounts • On-site gym • On-site nursery
21/04/2024
Full time
Job Title: Head of Production (Water Industry) Location: Green Lane, Walsall or Fulbourn Road, Cambridge (Hybrid - 3dpw in office location) Team : 3 direct reports, total team size 64 employees. Package: To 75k DOE + Company Car/Allowance + Bonus to 10% Travel: Frequent travel to Production sites including Cambridge and Hampton Loade Step into a pivotal role as our Head of Production and lead our passionate production teams to deliver pristine drinking water to communities across South Staffs and Cambridge. Drive transformative strategies that address industry challenges while championing our unwavering commitment to exceptional quality, safety, and environmental stewardship. This influential senior leadership position empowers you to oversee the day-to-day operations of water production and storage, ensuring a reliable and continuous water supply for all. Join us in making a meaningful impact-providing clean, safe water to enhance lives and sustain our communities. About us: At South Staffs Water, we deliver clean and reliable water supplies to around 1.7 million customers within the South Staffs and Cambridge regions. As a water only Company, providing clean, healthy water 24 hours a day, 365 days a year is at the very heart of what we do and that's where you come in. About the role: • Champion Human Organisation Performance (HOP) principles to drive health and safety performance improvements to mitigate critical risk / hazards. • Deliver water quality compliance risk index (CRI) outcome delivery incentive (ODI). • Deliver annual unplanned interruption outcome delivery incentive (ODI). • Deliver maintenance, compliance, and team activities within annual operating expenditure budgets. • Continuous employee engagement, staff retention and team development. The key deliverables: • Effective leadership of Production teams across both operating regions • Management and implementation of industry leading Health & Safety standards associated with all operational staff and sites. • Providing direction, strategies and tracking operational performance to ensure compliance with Defra, EA, HSE, DWI standards. • Liaising with external bodies, auditors, review bodies and regulators • Evaluation of key business processes to ensure internal controls and risk measures are effective. • Ensuring sufficient competent staff are in place and that training is evaluated and maintained at the required standard. • Effectively managing budgets for operational and capital spend • Developing strategies and tactical plans for the risk-based optimisation of maintenance and reactive interventions • Developing strategies for the management of interventions to balance the operational risks of failure. • Overall accountability for Competent Operator Scheme compliance and assurance. • Responsible for water quality compliance risk index (CRI) outcome delivery incentive (ODI). • Being part of emergency/incident standby rota. What you'll need: • Experience of Production leadership roles in a Water/Energy or similar environment • The ability to think strategically, make decisions, and set priorities. • Ability to lead, develop and motivate distributed teams in an agile environment. • Demonstrate well-honed emotional intelligence and communication skills, able to influence and build effective relationships across a range of internal and external stakeholders and act as an ambassador for the business. • Experience of managing operating and capital budgets is essential. • Demonstrate the ability to engage with internal and external stakeholders at a senior level. • Educated to degree level or equivalent experience • NEBOSH Diploma or NVQ Level 5 Diploma in H&S desired. • Hold or working towards Chartership of an Institution desired • Must hold a full UK Driving Licence. What you'll get in return: • Basic salary to £75k DOE • Bonus up to 10% • Car/Car Allowance • Matched pension contributions • Employee assistance and wellbeing programme • Private Health • Retail discounts • On-site gym • On-site nursery
Job Purpose & Summary Your expertise as a Multimedia Specialist is essential to our team. This is a multi-disciplinary role across a broad range of platforms, and you will need to be an expert in graphic design, photography, videography, web development and search engine marketing. You will work both independently and as part of a team, and your ability to execute these tasks effectively is crucial to the growth and prosperity of our organisation. Key responsibilities Implement and manage performance of Magenta, Joomla, Shopify, WordPress & HTML sites via organic search engine marketing. Devise, develop and execute off-page linking strategies, where necessary. Optimize websites, Google/Facebook feeds to ensure content engagement and conversion. Monitor performance of sites against acquisition targets identifying areas for improvement and provide recommendations. Create and implement on-page and off-page strategies to facilitate acquisition targets across all digital channels. Identify digital gaps and provide development team with recommendations for implementation based on driving maximum traffic, engagement and conversion while following white-hat SEO best practices. Monitor competitors and provide recommendations to ensure clients achieve maximum returns. Development in conjunction with design team for specific landing page optimization/conversion AdWords campaigns across Magento, Joomla, Shopify, WordPress and HTML. Provide assistance with specifying and designing Internet strategies and web-based methods. Oversee the creative process and give guidance to the design/media team as required. Collaborate with web developers to integrate multimedia elements into websites and optimize user experiences. Ensure content is responsive and accessible. Create and format multimedia content for various media platforms, adapting content to meet platform-specific requirements and trends. Testing multimedia products for technical errors or faults and correct accordingly. Analysing, designing and developing Internet sites applying a mixture of artistry and creativity with software programming and Scripting languages and interfacing with operating environments. Communicating with network specialists regarding web-related issues, such as security and hosting websites, to control and enforce Internet and web server security, space allocation, user access, business continuity, website backup and disaster recovery planning. Designing, developing and integrating computer code with other specialised inputs, such as image files, audio files and Scripting languages, to produce, maintain and support websites. Continue to develop enhancements for product HyperGift. Monitor Product HyperGift sales and provide marketing strategies for current HyperGift clients. Production of HyperGift training videos. Monitor and upgrade Product HyperGift Voucher Templates. Skills and Qualifications Minimum of 5 years' in SEO and development experience across multiple CMS/websites. Excellent analytical skills with experience of delivering reports and ensuring recommended actions. Working development knowledge of Opensource CMS, Shopify, PHP, HTML 5, Java and Python. C# added advantage. Proficiency in multimedia software and tools, such as Adobe Creative Suite (Premiere Pro, After Effects, Photoshop, Illustrator), Final Cut Pro, or similar. Strong understanding of photo/video production techniques, including shooting, editing, color correction, and sound design. Drone operator experience, preferably DJI. A good understanding of technologies used to run, track and optimise campaigns. Super analytical, evaluative and problem-solving abilities. Ability to establish priorities, work independently and proceed with objectives without supervision. Team Player.
19/04/2024
Full time
Job Purpose & Summary Your expertise as a Multimedia Specialist is essential to our team. This is a multi-disciplinary role across a broad range of platforms, and you will need to be an expert in graphic design, photography, videography, web development and search engine marketing. You will work both independently and as part of a team, and your ability to execute these tasks effectively is crucial to the growth and prosperity of our organisation. Key responsibilities Implement and manage performance of Magenta, Joomla, Shopify, WordPress & HTML sites via organic search engine marketing. Devise, develop and execute off-page linking strategies, where necessary. Optimize websites, Google/Facebook feeds to ensure content engagement and conversion. Monitor performance of sites against acquisition targets identifying areas for improvement and provide recommendations. Create and implement on-page and off-page strategies to facilitate acquisition targets across all digital channels. Identify digital gaps and provide development team with recommendations for implementation based on driving maximum traffic, engagement and conversion while following white-hat SEO best practices. Monitor competitors and provide recommendations to ensure clients achieve maximum returns. Development in conjunction with design team for specific landing page optimization/conversion AdWords campaigns across Magento, Joomla, Shopify, WordPress and HTML. Provide assistance with specifying and designing Internet strategies and web-based methods. Oversee the creative process and give guidance to the design/media team as required. Collaborate with web developers to integrate multimedia elements into websites and optimize user experiences. Ensure content is responsive and accessible. Create and format multimedia content for various media platforms, adapting content to meet platform-specific requirements and trends. Testing multimedia products for technical errors or faults and correct accordingly. Analysing, designing and developing Internet sites applying a mixture of artistry and creativity with software programming and Scripting languages and interfacing with operating environments. Communicating with network specialists regarding web-related issues, such as security and hosting websites, to control and enforce Internet and web server security, space allocation, user access, business continuity, website backup and disaster recovery planning. Designing, developing and integrating computer code with other specialised inputs, such as image files, audio files and Scripting languages, to produce, maintain and support websites. Continue to develop enhancements for product HyperGift. Monitor Product HyperGift sales and provide marketing strategies for current HyperGift clients. Production of HyperGift training videos. Monitor and upgrade Product HyperGift Voucher Templates. Skills and Qualifications Minimum of 5 years' in SEO and development experience across multiple CMS/websites. Excellent analytical skills with experience of delivering reports and ensuring recommended actions. Working development knowledge of Opensource CMS, Shopify, PHP, HTML 5, Java and Python. C# added advantage. Proficiency in multimedia software and tools, such as Adobe Creative Suite (Premiere Pro, After Effects, Photoshop, Illustrator), Final Cut Pro, or similar. Strong understanding of photo/video production techniques, including shooting, editing, color correction, and sound design. Drone operator experience, preferably DJI. A good understanding of technologies used to run, track and optimise campaigns. Super analytical, evaluative and problem-solving abilities. Ability to establish priorities, work independently and proceed with objectives without supervision. Team Player.
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
18/04/2024
Project-based
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
18/04/2024
Full time
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
18/04/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management