Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
18/04/2024
Project-based
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
18/04/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
18/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
Heating And Air Conditioning Engineer/Assistant - Immediate Start Bristol (Hybrid 3/2 days per week working on site) Flexi-time (40hr week) Private Healthcare & Pension Akkodis, is a global leader in the engineering and R&D market that is leveraging the power of connected data to accelerate innovation and digital transformation. With a shared passion for technology and talent, 50,000 engineers and digital experts deliver deep cross-sector expertise in 30 countries across North America, EMEA and APAC. Akkodis offers broad industry experience, and strong know-how in key technology sectors such as mobility, software & technology services, robotics, testing, simulations, data security, AI & data analytics. The combined IT and engineering expertise brings a unique end-to-end solution offering, with four service lines - Consulting, Solutions, Talents and Academy - to support clients in rethinking their product development and business processes, improve productivity, minimize time to market and shape a smarter and more sustainable tomorrow. Akkodis is part of the Adecco Group. Akkodis is a commercial brand under which both AKKA and Modis entities operate HVAC Layout engineering activities Assistance to the team lead/discipline pilot in the technical coordination, production and monitoring of layout engineering studies for one or more buildings on: > HVAC equipment. < HVAC ducting and other related items such as supports Overall integration of HVACl design into the dedicated buildings Proposal of technical solutions to improve design maturity Monitoring and resolution of design Open Points and design non-conformances in the specific discipline Reception of input data for the layout engineering of the building (Process & Instrumentation Diagrams, equipment data, etc.), analysis and verification of technical consistency. Production and review of related technical documents (Layout Release Reports, design changes, CTS, design packages) Review and assessment of deliverables produced by electrical execution design such as drawings or 3D design packages Support and follow up of execution design activities undertaken by MEH partners as per instructed by the client Support to resolve queries coming from site-based design teams (JDO) Skills & Knowledge: Technical Skills Good knowledge and understanding of general layout rules for an industrial project. Knowledge of the general operation of a nuclear power station and the associated safety aspects. Experience working with design software PDMS or E3D Software Skills Microsoft Word/Excel. Good knowledge of PDMS (or any 3D design software), Autocad 2D and Navisworks software (consultation). Adecco - AKKA is acting as an Employment Agency in relation to this vacancy.
18/04/2024
Full time
Heating And Air Conditioning Engineer/Assistant - Immediate Start Bristol (Hybrid 3/2 days per week working on site) Flexi-time (40hr week) Private Healthcare & Pension Akkodis, is a global leader in the engineering and R&D market that is leveraging the power of connected data to accelerate innovation and digital transformation. With a shared passion for technology and talent, 50,000 engineers and digital experts deliver deep cross-sector expertise in 30 countries across North America, EMEA and APAC. Akkodis offers broad industry experience, and strong know-how in key technology sectors such as mobility, software & technology services, robotics, testing, simulations, data security, AI & data analytics. The combined IT and engineering expertise brings a unique end-to-end solution offering, with four service lines - Consulting, Solutions, Talents and Academy - to support clients in rethinking their product development and business processes, improve productivity, minimize time to market and shape a smarter and more sustainable tomorrow. Akkodis is part of the Adecco Group. Akkodis is a commercial brand under which both AKKA and Modis entities operate HVAC Layout engineering activities Assistance to the team lead/discipline pilot in the technical coordination, production and monitoring of layout engineering studies for one or more buildings on: > HVAC equipment. < HVAC ducting and other related items such as supports Overall integration of HVACl design into the dedicated buildings Proposal of technical solutions to improve design maturity Monitoring and resolution of design Open Points and design non-conformances in the specific discipline Reception of input data for the layout engineering of the building (Process & Instrumentation Diagrams, equipment data, etc.), analysis and verification of technical consistency. Production and review of related technical documents (Layout Release Reports, design changes, CTS, design packages) Review and assessment of deliverables produced by electrical execution design such as drawings or 3D design packages Support and follow up of execution design activities undertaken by MEH partners as per instructed by the client Support to resolve queries coming from site-based design teams (JDO) Skills & Knowledge: Technical Skills Good knowledge and understanding of general layout rules for an industrial project. Knowledge of the general operation of a nuclear power station and the associated safety aspects. Experience working with design software PDMS or E3D Software Skills Microsoft Word/Excel. Good knowledge of PDMS (or any 3D design software), Autocad 2D and Navisworks software (consultation). Adecco - AKKA is acting as an Employment Agency in relation to this vacancy.
Junior Electrical Integration Engineer Location: Gaydon (WestMidlands) Full Time (40hr week) Monday - Friday Private Healthcare & Pension Akkodis, is a global leader in the engineering and R&D market that is leveraging the power of connected data to accelerate innovation and digital transformation. With a shared passion for technology and talent, 50,000 engineers and digital experts deliver deep cross-sector expertise in 30 countries across North America, EMEA and APAC. Akkodis offers broad industry experience, and strong know-how in key technology sectors such as mobility, software & technology services, robotics, testing, simulations, data security, AI & data analytics. The combined IT and engineering expertise brings a unique end-to- end solution offering, with four service lines - Consulting, Solutions, Talents and Academy - to support clients in rethinking their product development and business processes, improve productivity, minimize time to market and shape a smarter and more sustainable tomorrow. Akkodis is part of the Adecco Group. Akkodis is a commercial brand under which both AKKA and Modis entities operate. Responsibilities Reporting to the Team Leader, the successful candidate will support the development of EE systems for high-end, iconic sports cars. It will be your responsibility to guarantee the functional & technical delivery of projects within your field of expertise, delivering vehicle targets, through the following activity: Ensure both functional and platform commodities are integrated and delivered Cross functional team integration to plan and achieve programme delivery Effective reporting, identifying issues and driving a concern resolution approach Manage your functions virtual and physical design verification plan, with overall sign off responsibility Definition and understanding of network signals, ECU coding/configuration and development Checking software functions, network signal alignment and diagnostics Functional testing on labcars at vehicle level (system integration Management and resolution of test issues with suppliers Required skills With a strong technical, analytical and quality focused mind-set, you should be used to setting and delivery to targets, through clear and confident communication, including experience of supplier management. Specific requirements of these roles include: An Electrical/Electronics Engineering degree (or equivalent/related) (Masters Degree Highly Desirable) Demonstrable understanding of delivering Electrical or Electronics commodities, including quality, cost, function, weight and timing Proven record experience of networks/diagnostics/integration with specific feature/function ownership and delivery Experience of one or more of the following commodity areas: Body Electronics, Telematics, Park Assist, Antenna, Lighting, EDS, Switchgear, Cluster and Display, Infotainment, Audio, CAD Design, Networks Programme Management Support Team experience appreciated Usage of AUTOSAR stack and Vector tool-chain required. Any experience with INCA would be a plus. UK and overseas travel may be required. Adecco - AKKA is acting as an Employment Agency in relation to this vacancy.
18/04/2024
Full time
Junior Electrical Integration Engineer Location: Gaydon (WestMidlands) Full Time (40hr week) Monday - Friday Private Healthcare & Pension Akkodis, is a global leader in the engineering and R&D market that is leveraging the power of connected data to accelerate innovation and digital transformation. With a shared passion for technology and talent, 50,000 engineers and digital experts deliver deep cross-sector expertise in 30 countries across North America, EMEA and APAC. Akkodis offers broad industry experience, and strong know-how in key technology sectors such as mobility, software & technology services, robotics, testing, simulations, data security, AI & data analytics. The combined IT and engineering expertise brings a unique end-to- end solution offering, with four service lines - Consulting, Solutions, Talents and Academy - to support clients in rethinking their product development and business processes, improve productivity, minimize time to market and shape a smarter and more sustainable tomorrow. Akkodis is part of the Adecco Group. Akkodis is a commercial brand under which both AKKA and Modis entities operate. Responsibilities Reporting to the Team Leader, the successful candidate will support the development of EE systems for high-end, iconic sports cars. It will be your responsibility to guarantee the functional & technical delivery of projects within your field of expertise, delivering vehicle targets, through the following activity: Ensure both functional and platform commodities are integrated and delivered Cross functional team integration to plan and achieve programme delivery Effective reporting, identifying issues and driving a concern resolution approach Manage your functions virtual and physical design verification plan, with overall sign off responsibility Definition and understanding of network signals, ECU coding/configuration and development Checking software functions, network signal alignment and diagnostics Functional testing on labcars at vehicle level (system integration Management and resolution of test issues with suppliers Required skills With a strong technical, analytical and quality focused mind-set, you should be used to setting and delivery to targets, through clear and confident communication, including experience of supplier management. Specific requirements of these roles include: An Electrical/Electronics Engineering degree (or equivalent/related) (Masters Degree Highly Desirable) Demonstrable understanding of delivering Electrical or Electronics commodities, including quality, cost, function, weight and timing Proven record experience of networks/diagnostics/integration with specific feature/function ownership and delivery Experience of one or more of the following commodity areas: Body Electronics, Telematics, Park Assist, Antenna, Lighting, EDS, Switchgear, Cluster and Display, Infotainment, Audio, CAD Design, Networks Programme Management Support Team experience appreciated Usage of AUTOSAR stack and Vector tool-chain required. Any experience with INCA would be a plus. UK and overseas travel may be required. Adecco - AKKA is acting as an Employment Agency in relation to this vacancy.
Calling All Tidal Power Pioneers! Are you electrified by innovation and powered by passion? Do you dream of designing systems that harness the mighty dance of the tides? If you're nodding your head like a buoy in high tide, then continue reading as this Electrical & Automation Manager may be your next destination. You would be the technical captain of our electrical and automation systems , steering the generator power circuit, auxiliary power circuit, instrumentation, and communication systems. You would champion product development initiatives that align with the technology development roadmap, like a true tidal trailblazer. You will be able to apply your d eep understanding of LV, MV, and HV systems . You enjoy articulating requirements and concept designs with the clarity of a calm sea, enabling our partners to bring your visions to life. You enjoy the c hallenge of navigating the selection and management of specialist partners and suppliers like a seasoned skipper. You can apply your technical lead experience in ensuring a smooth process leading the delivery team through all stages of the product life cycle, from the first sketch to the final wave of installation . You will be able to s et the course for tender pricing, budgeting, and cost control, keeping our ship on a steady financial keel. You will have the autonomy to develop and refine standards and processes, making sure our electrical and automation systems are as reliable as the tides. This role would s uit a senior level candidate with demonstrated success in managing electrical and automation system delivery both UK and Internationally. This role is based in Bristol, you can expect a salary package up to £80,000 per annum as well as hybrid working, excellent career progression opportunities and a great working culture. If being at the forefront of tidal power technology with a company that leads product development and offshore services sounds like your cup of tea then please apply with your CV and we can arrange an initial chat to discuss further. *Unfortunately candidates not residing in the UK or require sponsorship will not be eligible to apply* To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
18/04/2024
Full time
Calling All Tidal Power Pioneers! Are you electrified by innovation and powered by passion? Do you dream of designing systems that harness the mighty dance of the tides? If you're nodding your head like a buoy in high tide, then continue reading as this Electrical & Automation Manager may be your next destination. You would be the technical captain of our electrical and automation systems , steering the generator power circuit, auxiliary power circuit, instrumentation, and communication systems. You would champion product development initiatives that align with the technology development roadmap, like a true tidal trailblazer. You will be able to apply your d eep understanding of LV, MV, and HV systems . You enjoy articulating requirements and concept designs with the clarity of a calm sea, enabling our partners to bring your visions to life. You enjoy the c hallenge of navigating the selection and management of specialist partners and suppliers like a seasoned skipper. You can apply your technical lead experience in ensuring a smooth process leading the delivery team through all stages of the product life cycle, from the first sketch to the final wave of installation . You will be able to s et the course for tender pricing, budgeting, and cost control, keeping our ship on a steady financial keel. You will have the autonomy to develop and refine standards and processes, making sure our electrical and automation systems are as reliable as the tides. This role would s uit a senior level candidate with demonstrated success in managing electrical and automation system delivery both UK and Internationally. This role is based in Bristol, you can expect a salary package up to £80,000 per annum as well as hybrid working, excellent career progression opportunities and a great working culture. If being at the forefront of tidal power technology with a company that leads product development and offshore services sounds like your cup of tea then please apply with your CV and we can arrange an initial chat to discuss further. *Unfortunately candidates not residing in the UK or require sponsorship will not be eligible to apply* To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Calling All Tidal Power Pioneers! Are you electrified by innovation and powered by passion? Do you dream of designing systems that harness the mighty dance of the tides? If you're nodding your head like a buoy in high tide, then continue reading as this Electrical & Automation Manager may be your next destination. You would be the technical captain of our electrical and automation systems , steering the generator power circuit, auxiliary power circuit, instrumentation, and communication systems. You would champion product development initiatives that align with the technology development roadmap, like a true tidal trailblazer. You will be able to apply your d eep understanding of LV, MV, and HV systems . You enjoy articulating requirements and concept designs with the clarity of a calm sea, enabling our partners to bring your visions to life. You enjoy the c hallenge of navigating the selection and management of specialist partners and suppliers like a seasoned skipper. You can apply your technical lead experience in ensuring a smooth process leading the delivery team through all stages of the product life cycle, from the first sketch to the final wave of installation . You will be able to s et the course for tender pricing, budgeting, and cost control, keeping our ship on a steady financial keel. You will have the autonomy to develop and refine standards and processes, making sure our electrical and automation systems are as reliable as the tides. This role would s uit a senior level candidate with demonstrated success in managing electrical and automation system delivery both UK and Internationally. This role is based in Bristol, you can expect a salary package up to £80,000 per annum as well as hybrid working, excellent career progression opportunities and a great working culture. If being at the forefront of tidal power technology with a company that leads product development and offshore services sounds like your cup of tea then please apply with your CV and we can arrange an initial chat to discuss further. *Unfortunately candidates not residing in the UK or require sponsorship will not be eligible to apply* To find out more about Progressive Recruitment please visit the website. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
18/04/2024
Full time
Calling All Tidal Power Pioneers! Are you electrified by innovation and powered by passion? Do you dream of designing systems that harness the mighty dance of the tides? If you're nodding your head like a buoy in high tide, then continue reading as this Electrical & Automation Manager may be your next destination. You would be the technical captain of our electrical and automation systems , steering the generator power circuit, auxiliary power circuit, instrumentation, and communication systems. You would champion product development initiatives that align with the technology development roadmap, like a true tidal trailblazer. You will be able to apply your d eep understanding of LV, MV, and HV systems . You enjoy articulating requirements and concept designs with the clarity of a calm sea, enabling our partners to bring your visions to life. You enjoy the c hallenge of navigating the selection and management of specialist partners and suppliers like a seasoned skipper. You can apply your technical lead experience in ensuring a smooth process leading the delivery team through all stages of the product life cycle, from the first sketch to the final wave of installation . You will be able to s et the course for tender pricing, budgeting, and cost control, keeping our ship on a steady financial keel. You will have the autonomy to develop and refine standards and processes, making sure our electrical and automation systems are as reliable as the tides. This role would s uit a senior level candidate with demonstrated success in managing electrical and automation system delivery both UK and Internationally. This role is based in Bristol, you can expect a salary package up to £80,000 per annum as well as hybrid working, excellent career progression opportunities and a great working culture. If being at the forefront of tidal power technology with a company that leads product development and offshore services sounds like your cup of tea then please apply with your CV and we can arrange an initial chat to discuss further. *Unfortunately candidates not residing in the UK or require sponsorship will not be eligible to apply* To find out more about Progressive Recruitment please visit the website. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Design Manager (Electrical) - Data Centres Outside IR35 Contract Bristol/Remote I'm looking to speak with some skilled Design Managers, Electrically biased , to work client side on some interesting Data Centre projects . You'll need to have previous in depth experience of delivering design of New Build and Refurb Data Centre projects across the UK and Europe . This will be a 6 month rolling contract with flexible remote working opportunity with occasional need to travel to London with a pay rate of around £60-70 per hour Outside IR35 depending on experience. Below are some of the job requirements so you get an understanding of the role: Manage and review design documents and drawings for accuracy and compliance, acting as a Subject Matter Expert. Coordinate with external teams, including Engineers, Consultants, and contractors, to ensure projects are completed on time. Provide technical expertise and advice on data centre design, incorporating best practices and innovative solutions. Lead work groups focused on design improvements, efficiency enhancements, and cost reduction strategies. Ensure projects meet operational requirements, budget constraints, and time lines. If you're interested in applying for the role, please apply here or send me your updated CV via email. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
17/04/2024
Project-based
Design Manager (Electrical) - Data Centres Outside IR35 Contract Bristol/Remote I'm looking to speak with some skilled Design Managers, Electrically biased , to work client side on some interesting Data Centre projects . You'll need to have previous in depth experience of delivering design of New Build and Refurb Data Centre projects across the UK and Europe . This will be a 6 month rolling contract with flexible remote working opportunity with occasional need to travel to London with a pay rate of around £60-70 per hour Outside IR35 depending on experience. Below are some of the job requirements so you get an understanding of the role: Manage and review design documents and drawings for accuracy and compliance, acting as a Subject Matter Expert. Coordinate with external teams, including Engineers, Consultants, and contractors, to ensure projects are completed on time. Provide technical expertise and advice on data centre design, incorporating best practices and innovative solutions. Lead work groups focused on design improvements, efficiency enhancements, and cost reduction strategies. Ensure projects meet operational requirements, budget constraints, and time lines. If you're interested in applying for the role, please apply here or send me your updated CV via email. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
Role: Senior RAM Engineer Job Description Summary We are seeking a highly motivated and experienced Senior RAM Engineer to join our global team of experts in high voltage electrical equipment, with a particular focus on HVDC systems. As the Senior RAM Engineer, you will be responsible for coordinating, creating, verifying, and validating the reliability, availability, and maintainability models for HVDC systems and subsystems, managing risks and opportunities that affect the systems throughout their life cycle. You will also play a key role in enforcing engineering discipline and quality processes, developing and industrializing engineering solutions, promoting health and safety practices, and providing technical leadership and training to customers and colleagues Job Description Essential Responsibilities Reliability, Availability and Maintainability Studies and Management (RAMS) Defining RAMS study structure and processes; Monitoring the performance of RAMS processes; Tracking and reporting to the Project Directorate the status of the action list; Participating in cross functional Gate Reviews and present RAMS dashboard; Chairing the 3D Model Review for Maintainability; Leading the engagement with OEMs and relevant interface control documents; Leading the engagement, the Logistics Interface; Leading Maintainability deliverables and Consultant; Leading Workshop Consultants. Escalating to the GSC Technical Director and SHE Coordinator all SHE related risks. Health and Safety Actively and routinely promote the identification of hazards and EHS risks in own area of operation and objects of design. Provide insight to leaders, customers and colleagues with respect to own safety and systems and product integrity. Qualifications/Requirements Bachelor of Engineering degree or equivalent from an accredited institution Proven substantial knowledge and practical experience in performing reliability engineering in different industries Desired Characteristics Education Preferably educated with a Master of Engineering degree or above from an accredited institution or equivalent knowledge or professional experience. Technical Domain Competencies At least proficient in the following areas: HVDC domain knowledge Reliability, availability and maintainability (RAM) assessment and management Reliability Block Diagrams (RBD Failure Mode & Effects Analysis (FMEA) Knowledgeable in the following areas: Reliability Centred Maintenance Systems Engineering HazId HazOp Electrical power systems modelling and analysis Offshore electrical power facilities Engineering Management Competencies: Planning: Ability to plan and manage team work. Risk and Opportunity Management: Proactively identifies and manages risks, issues and opportunities. Acquisition and Supply: Generation of work products associated with acquiring or providing products or services. Knowledge Management: capable of deploying training, coaching and mentoring to customers and colleagues. Proactively records and disseminates return of experience. Technical Domain Tools knowledge: Proficient use of: Reliability and availability assessment modelling by Markov and Monte Carlo methods (Reliasoft, Isograph); Professional Competencies Communications: Strong oral and written communication skills in English. Critical Thinking: Capable of structuring defendable arguments, evidence, assumptions and decisions. Ethics and Professionalism: Personal commitment to professional standards, recognising obligations to society, the profession and the environment. Technical Leadership: understanding of customer need, problem solving, creativity and innovation, relationship management, operational oversight and accountability, engineering instinct. Negotiation: capable of resolving points of difference, to gain advantage for an individual or collective, or crafting outcomes to satisfy various interests. Team Dynamics and Facilitation: Ability to be a team player and to facilitate groups interactions. Characteristic: Self-motivating, proactive and results driven approach. Curious, resilient and willing to learn. Able to work to deadlines with high quality, sense of urgency and delivery. Focused on delivering value to customers. Strong problem-solving and root cause identification skills. Willingness to travel as required.
17/04/2024
Project-based
Role: Senior RAM Engineer Job Description Summary We are seeking a highly motivated and experienced Senior RAM Engineer to join our global team of experts in high voltage electrical equipment, with a particular focus on HVDC systems. As the Senior RAM Engineer, you will be responsible for coordinating, creating, verifying, and validating the reliability, availability, and maintainability models for HVDC systems and subsystems, managing risks and opportunities that affect the systems throughout their life cycle. You will also play a key role in enforcing engineering discipline and quality processes, developing and industrializing engineering solutions, promoting health and safety practices, and providing technical leadership and training to customers and colleagues Job Description Essential Responsibilities Reliability, Availability and Maintainability Studies and Management (RAMS) Defining RAMS study structure and processes; Monitoring the performance of RAMS processes; Tracking and reporting to the Project Directorate the status of the action list; Participating in cross functional Gate Reviews and present RAMS dashboard; Chairing the 3D Model Review for Maintainability; Leading the engagement with OEMs and relevant interface control documents; Leading the engagement, the Logistics Interface; Leading Maintainability deliverables and Consultant; Leading Workshop Consultants. Escalating to the GSC Technical Director and SHE Coordinator all SHE related risks. Health and Safety Actively and routinely promote the identification of hazards and EHS risks in own area of operation and objects of design. Provide insight to leaders, customers and colleagues with respect to own safety and systems and product integrity. Qualifications/Requirements Bachelor of Engineering degree or equivalent from an accredited institution Proven substantial knowledge and practical experience in performing reliability engineering in different industries Desired Characteristics Education Preferably educated with a Master of Engineering degree or above from an accredited institution or equivalent knowledge or professional experience. Technical Domain Competencies At least proficient in the following areas: HVDC domain knowledge Reliability, availability and maintainability (RAM) assessment and management Reliability Block Diagrams (RBD Failure Mode & Effects Analysis (FMEA) Knowledgeable in the following areas: Reliability Centred Maintenance Systems Engineering HazId HazOp Electrical power systems modelling and analysis Offshore electrical power facilities Engineering Management Competencies: Planning: Ability to plan and manage team work. Risk and Opportunity Management: Proactively identifies and manages risks, issues and opportunities. Acquisition and Supply: Generation of work products associated with acquiring or providing products or services. Knowledge Management: capable of deploying training, coaching and mentoring to customers and colleagues. Proactively records and disseminates return of experience. Technical Domain Tools knowledge: Proficient use of: Reliability and availability assessment modelling by Markov and Monte Carlo methods (Reliasoft, Isograph); Professional Competencies Communications: Strong oral and written communication skills in English. Critical Thinking: Capable of structuring defendable arguments, evidence, assumptions and decisions. Ethics and Professionalism: Personal commitment to professional standards, recognising obligations to society, the profession and the environment. Technical Leadership: understanding of customer need, problem solving, creativity and innovation, relationship management, operational oversight and accountability, engineering instinct. Negotiation: capable of resolving points of difference, to gain advantage for an individual or collective, or crafting outcomes to satisfy various interests. Team Dynamics and Facilitation: Ability to be a team player and to facilitate groups interactions. Characteristic: Self-motivating, proactive and results driven approach. Curious, resilient and willing to learn. Able to work to deadlines with high quality, sense of urgency and delivery. Focused on delivering value to customers. Strong problem-solving and root cause identification skills. Willingness to travel as required.
Job title : Data Facility Engineer _ Mandarin speaking Our client, a leading telecommunications company, is looking for a data center engineer to join its site in Newport, Wales. Location : Newport, Wales What you will do: Manage and supervise the day-to-day operations and maintenance of mechanical and electrical equipment in a data center. Identify risks and perform IDC vendor operation and maintenance quality assessment. Perform RCA(root cause analysis) of critical equipment failures Troubleshoot and report of facility and data sever-level events within internal SLA Provide training and guidance to operation team, such as MOP,SOP,EOP Ensure all EHS procedures are adhered to by vendor and internal staff Communicate complex technical information to non-technical audiences Follow the instructions to verify the IDC supplier's acceptance of the cabinet and on-site data center hosting service (racks/power/cooling) delivery confirmation. Responsible for the operation and maintenance of the cloud data center site, responsible for on-site reliability and associate project delivery The ideal candidate: 1+ years of relevant work experience in a data center or other critical environment or 1+ years of technical training or experience with relevant data center facilities equipment Bachelors or above in applicable engineering field or mechanical or electrical Electrical or mechanical License in the UK Strong verbal and written communication skills Solid leadership and organizational skills Proven self-starter Ability to prioritize in a complex, fast-paced environment Base in the UK, would be able to travel to other countries. Holding a valid UK Driving licence Project People is acting as an Employment Business in relation to this vacancy.
17/04/2024
Project-based
Job title : Data Facility Engineer _ Mandarin speaking Our client, a leading telecommunications company, is looking for a data center engineer to join its site in Newport, Wales. Location : Newport, Wales What you will do: Manage and supervise the day-to-day operations and maintenance of mechanical and electrical equipment in a data center. Identify risks and perform IDC vendor operation and maintenance quality assessment. Perform RCA(root cause analysis) of critical equipment failures Troubleshoot and report of facility and data sever-level events within internal SLA Provide training and guidance to operation team, such as MOP,SOP,EOP Ensure all EHS procedures are adhered to by vendor and internal staff Communicate complex technical information to non-technical audiences Follow the instructions to verify the IDC supplier's acceptance of the cabinet and on-site data center hosting service (racks/power/cooling) delivery confirmation. Responsible for the operation and maintenance of the cloud data center site, responsible for on-site reliability and associate project delivery The ideal candidate: 1+ years of relevant work experience in a data center or other critical environment or 1+ years of technical training or experience with relevant data center facilities equipment Bachelors or above in applicable engineering field or mechanical or electrical Electrical or mechanical License in the UK Strong verbal and written communication skills Solid leadership and organizational skills Proven self-starter Ability to prioritize in a complex, fast-paced environment Base in the UK, would be able to travel to other countries. Holding a valid UK Driving licence Project People is acting as an Employment Business in relation to this vacancy.
Required for an initial six month Full time contract in Sweden, a Process Equipment Installation Engineer. Key Responsibilities: 1. Technical Installation Supervision & Contractor Management: Supervise installation of process equipment by suppliers to ensure compliance to schedule, quality and safety. Resolve any technical/engineering issues and escalate where necessary. 2. Site Coordination: Coordinate activities with other interfacing groups and contractors with overlapping works 3. HSE & Risk Management: Actively manage HSE and risk, implementing safety measures and quality standards throughout installation. 4. Communication: Lead and minute daily toolbox meetings, weekly progress meetings, and internal coordination meetings. Work with Planner/Scheduler to keep integrated schedule up to date and report on progress. Escalate issues in the field where appropriate through clear and concise communications, and where required issue non-compliance reports and follow up on resolution. 5. Installation Handover: Develop comprehensive completions plan for equipment installation and facilitate a smooth handover to commissioning team Experience: 1. Bachelor's or master's degree in mechanical engineering/electrical engineering, or similar, or extensive relevant work experience. 2. 5+ years of hands-on experience with installing, commissioning and/or troubleshooting process/manufacturing equipment 3. Excellent English written and oral skills, fluency in other languages is a plus (Mandarin, Korean) Personal Attributes: 1. Able to work within and communicate effectively and concisely in a multi-cultural team environment 2. Good problem solving and negotiation skills 3. Energetic and able to handle stress while maintaining a friendly and professional demeanor 4. Ownership in solving issues and a 'can-do' attitude 5. Methodical and structured way of working To arrange a Teams-based interview, please email in the first instance, your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
17/04/2024
Project-based
Required for an initial six month Full time contract in Sweden, a Process Equipment Installation Engineer. Key Responsibilities: 1. Technical Installation Supervision & Contractor Management: Supervise installation of process equipment by suppliers to ensure compliance to schedule, quality and safety. Resolve any technical/engineering issues and escalate where necessary. 2. Site Coordination: Coordinate activities with other interfacing groups and contractors with overlapping works 3. HSE & Risk Management: Actively manage HSE and risk, implementing safety measures and quality standards throughout installation. 4. Communication: Lead and minute daily toolbox meetings, weekly progress meetings, and internal coordination meetings. Work with Planner/Scheduler to keep integrated schedule up to date and report on progress. Escalate issues in the field where appropriate through clear and concise communications, and where required issue non-compliance reports and follow up on resolution. 5. Installation Handover: Develop comprehensive completions plan for equipment installation and facilitate a smooth handover to commissioning team Experience: 1. Bachelor's or master's degree in mechanical engineering/electrical engineering, or similar, or extensive relevant work experience. 2. 5+ years of hands-on experience with installing, commissioning and/or troubleshooting process/manufacturing equipment 3. Excellent English written and oral skills, fluency in other languages is a plus (Mandarin, Korean) Personal Attributes: 1. Able to work within and communicate effectively and concisely in a multi-cultural team environment 2. Good problem solving and negotiation skills 3. Energetic and able to handle stress while maintaining a friendly and professional demeanor 4. Ownership in solving issues and a 'can-do' attitude 5. Methodical and structured way of working To arrange a Teams-based interview, please email in the first instance, your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
P&C Design Engineer My client are recruiting for a Protection and Control Engineer to join our team in Wakefield within our Engineering department. They are a specialist service provider for the Power Transmission and Generation sector, supplying specialist services for both design and drawing management nationally for majority of the UK's power distribution network and system operators. Key Responsibilities: HV light current secondary design capability. Undertake and lead design work with due regard to Health, Safety & Environmental Procedures and production of Designer Risk Assessments, as necessary. Represent the Department at project start-up, scheme review, progress, closeout, liaison and other meetings. Be responsible for maintaining internal and external interfaces during the project. Desirable Experience: National Grid 132/275/400kV project experience essential. SSE 132/275/400kV projects experience an advantage Must be able to work as part of a team. Have experience in the design of control and protection systems for HV networks and a degree (or equivalent) in Electrical Engineering. Degree in Electrical Power Systems preferred. Persons & BESC preferable but not essential. Good working knowledge of MS Office packages (Work, Excel) Flexible and willingness to accommodating to deliver a variety of tasks with predetermined deadlines Well organised, self-motivated, and proactive individual with excellent communication skills. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
16/04/2024
Full time
P&C Design Engineer My client are recruiting for a Protection and Control Engineer to join our team in Wakefield within our Engineering department. They are a specialist service provider for the Power Transmission and Generation sector, supplying specialist services for both design and drawing management nationally for majority of the UK's power distribution network and system operators. Key Responsibilities: HV light current secondary design capability. Undertake and lead design work with due regard to Health, Safety & Environmental Procedures and production of Designer Risk Assessments, as necessary. Represent the Department at project start-up, scheme review, progress, closeout, liaison and other meetings. Be responsible for maintaining internal and external interfaces during the project. Desirable Experience: National Grid 132/275/400kV project experience essential. SSE 132/275/400kV projects experience an advantage Must be able to work as part of a team. Have experience in the design of control and protection systems for HV networks and a degree (or equivalent) in Electrical Engineering. Degree in Electrical Power Systems preferred. Persons & BESC preferable but not essential. Good working knowledge of MS Office packages (Work, Excel) Flexible and willingness to accommodating to deliver a variety of tasks with predetermined deadlines Well organised, self-motivated, and proactive individual with excellent communication skills. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
16/04/2024
Project-based
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
16/04/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
Radar Engineer - Algorithm Development Salary: £40,000 to £80,000 Dependent on experience We are currently seeking a skilled and experienced Radar Engineer to join the team at a leading defence engineering consultancy. You will have a strong background in algorithm development, with proficiency in MATLAB and Python. As a Radar Engineer, you will be responsible for designing, developing, and testing radar systems and algorithms for a range of applications. You will work closely with our multidisciplinary team of engineers to deliver innovative solutions to complex problems. Please note - Security clearance will be required for this role. Location: Greater Southampton area. Work Pattern: Flexible/Hybrid (A combination of home and office working) Key Responsibilities: Design, develop, and test radar algorithms using MATLAB and Python Collaborate with cross-functional teams to integrate algorithms into radar systems Conduct research to identify new radar technologies and techniques Analyze system performance and recommend improvements Prepare technical reports and presentations for clients and stakeholders Stay up-to-date with the latest developments in radar engineering and related fields Essential Skills and Experience: Degree in Electrical Engineering, Physics, or a related field Proven experience in algorithm development for radar systems Strong proficiency in MATLAB and Python Experience with radar system design and analysis Excellent problem-solving skills and attention to detail Strong communication and teamwork skills Desirable Skills and Experience: Experience with other programming languages such as C++ or Java Familiarity with machine learning and artificial intelligence techniques Experience with simulation tools such as Simulink or Xilinx System Generator Knowledge of radar signal processing techniques Benefits: This blue chip employer offers a supportive and cooperative work environment, where you will have the opportunity to work on exciting and challenging projects. Benefits include: Hybrid working pattern (a combination of home and office working) Competitive salary and benefits package Comprehensive training and development opportunities Access to cutting-edge technology and resources Opportunities to work with leading experts in the field If you are a motivated and experienced Radar Engineer looking for a new challenge, we would love to hear from you.
16/04/2024
Full time
Radar Engineer - Algorithm Development Salary: £40,000 to £80,000 Dependent on experience We are currently seeking a skilled and experienced Radar Engineer to join the team at a leading defence engineering consultancy. You will have a strong background in algorithm development, with proficiency in MATLAB and Python. As a Radar Engineer, you will be responsible for designing, developing, and testing radar systems and algorithms for a range of applications. You will work closely with our multidisciplinary team of engineers to deliver innovative solutions to complex problems. Please note - Security clearance will be required for this role. Location: Greater Southampton area. Work Pattern: Flexible/Hybrid (A combination of home and office working) Key Responsibilities: Design, develop, and test radar algorithms using MATLAB and Python Collaborate with cross-functional teams to integrate algorithms into radar systems Conduct research to identify new radar technologies and techniques Analyze system performance and recommend improvements Prepare technical reports and presentations for clients and stakeholders Stay up-to-date with the latest developments in radar engineering and related fields Essential Skills and Experience: Degree in Electrical Engineering, Physics, or a related field Proven experience in algorithm development for radar systems Strong proficiency in MATLAB and Python Experience with radar system design and analysis Excellent problem-solving skills and attention to detail Strong communication and teamwork skills Desirable Skills and Experience: Experience with other programming languages such as C++ or Java Familiarity with machine learning and artificial intelligence techniques Experience with simulation tools such as Simulink or Xilinx System Generator Knowledge of radar signal processing techniques Benefits: This blue chip employer offers a supportive and cooperative work environment, where you will have the opportunity to work on exciting and challenging projects. Benefits include: Hybrid working pattern (a combination of home and office working) Competitive salary and benefits package Comprehensive training and development opportunities Access to cutting-edge technology and resources Opportunities to work with leading experts in the field If you are a motivated and experienced Radar Engineer looking for a new challenge, we would love to hear from you.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
15/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
IoT Engineer/Budapest 3 days per week onsite/6 months +/Start ASAP * Design and Architecture: Lead the design and architecture of IoT networks, including sensor selection, connectivity options, data acquisition, storage, and analytics infrastructure. * Implementation: Implement end-to-end IoT solutions, including device provisioning, integration with cloud platforms, and development of custom applications and dashboards. * Prototyping: Rapidly prototype and iterate on IoT concepts to validate technical feasibility and demonstrate proof of concept to stakeholders. * Security: Implement security best practices to safeguard IoT devices, data, and communications against cyber threats and vulnerabilities. * Scalability: Design IoT solutions that are scalable and can accommodate future growth in terms of device volume, data volume, and system complexity. * Performance Optimisation: Optimise IoT systems for performance, reliability, and resource efficiency to ensure smooth operation under varying conditions. * Testing and Validation: Develop test plans and conduct thorough testing and validation of IoT systems to ensure functionality, interoperability, and compliance with specifications. * Documentation: Create comprehensive documentation, including system architecture diagrams, technical specifications, and user manuals, to facilitate system maintenance and knowledge transfer. * Collaboration: Collaborate closely with cross-functional teams, including hardware engineers, software developers, data scientists, and product managers, to deliver integrated IoT solutions that meet customer requirements. * Continuous Learning: Stay updated on emerging trends, technologies, and best practices in the field of IoT, and apply new knowledge to enhance the capabilities of our IoT offerings. Qualifications: * Bachelor's or Master's degree in Electrical Engineering, Computer Science, or a related field. * Proven experience in designing and implementing IoT networks, preferably in an industrial or commercial environment. * Proficiency in IoT protocols and standards, such as MQTT, CoAP, LoRaWAN, and Bluetooth Low Energy. * Hands-on experience with IoT hardware platforms, sensors, actuators, and Embedded systems. * Strong programming skills in languages such as C/C++, Python, Java, or JavaScript. * Experience with IoT cloud platforms, such as AWS IoT, Azure IoT, or Google Cloud IoT Core. * Familiarity with data management and analytics technologies, such as SQL databases, NoSQL databases, and big data platforms. * Excellent problem-solving skills and the ability to troubleshoot complex technical issues. * Effective communication skills and the ability to work collaboratively in a fast-paced, cross-functional team environment.
15/04/2024
Project-based
IoT Engineer/Budapest 3 days per week onsite/6 months +/Start ASAP * Design and Architecture: Lead the design and architecture of IoT networks, including sensor selection, connectivity options, data acquisition, storage, and analytics infrastructure. * Implementation: Implement end-to-end IoT solutions, including device provisioning, integration with cloud platforms, and development of custom applications and dashboards. * Prototyping: Rapidly prototype and iterate on IoT concepts to validate technical feasibility and demonstrate proof of concept to stakeholders. * Security: Implement security best practices to safeguard IoT devices, data, and communications against cyber threats and vulnerabilities. * Scalability: Design IoT solutions that are scalable and can accommodate future growth in terms of device volume, data volume, and system complexity. * Performance Optimisation: Optimise IoT systems for performance, reliability, and resource efficiency to ensure smooth operation under varying conditions. * Testing and Validation: Develop test plans and conduct thorough testing and validation of IoT systems to ensure functionality, interoperability, and compliance with specifications. * Documentation: Create comprehensive documentation, including system architecture diagrams, technical specifications, and user manuals, to facilitate system maintenance and knowledge transfer. * Collaboration: Collaborate closely with cross-functional teams, including hardware engineers, software developers, data scientists, and product managers, to deliver integrated IoT solutions that meet customer requirements. * Continuous Learning: Stay updated on emerging trends, technologies, and best practices in the field of IoT, and apply new knowledge to enhance the capabilities of our IoT offerings. Qualifications: * Bachelor's or Master's degree in Electrical Engineering, Computer Science, or a related field. * Proven experience in designing and implementing IoT networks, preferably in an industrial or commercial environment. * Proficiency in IoT protocols and standards, such as MQTT, CoAP, LoRaWAN, and Bluetooth Low Energy. * Hands-on experience with IoT hardware platforms, sensors, actuators, and Embedded systems. * Strong programming skills in languages such as C/C++, Python, Java, or JavaScript. * Experience with IoT cloud platforms, such as AWS IoT, Azure IoT, or Google Cloud IoT Core. * Familiarity with data management and analytics technologies, such as SQL databases, NoSQL databases, and big data platforms. * Excellent problem-solving skills and the ability to troubleshoot complex technical issues. * Effective communication skills and the ability to work collaboratively in a fast-paced, cross-functional team environment.
Silicon Photonics Designer Initial 6 month freelance contract + extensions Leuven, Belgium Location Please note that working from home is not possible for this position, as the nature of the tasks involved requires being physically present in the office. We believe in fostering a vibrant and interactive work environment that promotes effective collaboration, creativity, and productivity in this challenging assignment. After a training period, home-working could be possible, but the candidate needs to be living in Belgium. You will work in a team of photonic engineers developing photonic ICs (PICs) for a wide range of next generation applications. You will employ our client's cutting edge silicon photonics technologies to develop novel PICs and sub-systems for communication, (bio-)sensors, quantum photonics, lidar, photo-acoustics and so on. The assignment Design, model and layout photonic components and circuits Setup design of experiments and analyse test data Communicate your insights to internal cross-functional teams, technology developers and external partners Lead R&D projects and interact with external and internal customers Translate customer requirements into system concepts and PIC architectures Improve existing photonic platforms and contribute to new photonic concepts for emerging applications Continuously align with process, characterization, application and system experts. Required knowledge and skills A PhD in Photonics, Physics, Electrical Engineering or related field with at least 2 years of experience in silicon photonic design. In-depth knowledge of integrated photonics. Extensive expertise in design, optimization and layout of Si photonic components and circuits. Hands-on experience with photonic modelling software (eg Lumerical). Hands-on experience with layout tools (eg Luceda Ipkiss, Cadence, L-edit). Experience with Ipkiss is a plus. Good programming skills. Experience with Python is a strong plus. Experience with experimental setups, characterization and packaging of PICs is an advantage. Experience with actives integration (lasers, photodetectors, modulators) is a plus. The ability to work according to agreed customer timelines and manage time efficiently according to the project schedules.
12/04/2024
Project-based
Silicon Photonics Designer Initial 6 month freelance contract + extensions Leuven, Belgium Location Please note that working from home is not possible for this position, as the nature of the tasks involved requires being physically present in the office. We believe in fostering a vibrant and interactive work environment that promotes effective collaboration, creativity, and productivity in this challenging assignment. After a training period, home-working could be possible, but the candidate needs to be living in Belgium. You will work in a team of photonic engineers developing photonic ICs (PICs) for a wide range of next generation applications. You will employ our client's cutting edge silicon photonics technologies to develop novel PICs and sub-systems for communication, (bio-)sensors, quantum photonics, lidar, photo-acoustics and so on. The assignment Design, model and layout photonic components and circuits Setup design of experiments and analyse test data Communicate your insights to internal cross-functional teams, technology developers and external partners Lead R&D projects and interact with external and internal customers Translate customer requirements into system concepts and PIC architectures Improve existing photonic platforms and contribute to new photonic concepts for emerging applications Continuously align with process, characterization, application and system experts. Required knowledge and skills A PhD in Photonics, Physics, Electrical Engineering or related field with at least 2 years of experience in silicon photonic design. In-depth knowledge of integrated photonics. Extensive expertise in design, optimization and layout of Si photonic components and circuits. Hands-on experience with photonic modelling software (eg Lumerical). Hands-on experience with layout tools (eg Luceda Ipkiss, Cadence, L-edit). Experience with Ipkiss is a plus. Good programming skills. Experience with Python is a strong plus. Experience with experimental setups, characterization and packaging of PICs is an advantage. Experience with actives integration (lasers, photodetectors, modulators) is a plus. The ability to work according to agreed customer timelines and manage time efficiently according to the project schedules.
Position Available: Electrical Fitter Location: Bolton - Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen onsite Experience needed: Experience in manufacturing and testing within the electrical department. Experience working to a high level of workmanship standards and following product certification procedures, as well as keeping within allocated budgets and timescales. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for an Electrical Fitter to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
12/04/2024
Full time
Position Available: Electrical Fitter Location: Bolton - Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen onsite Experience needed: Experience in manufacturing and testing within the electrical department. Experience working to a high level of workmanship standards and following product certification procedures, as well as keeping within allocated budgets and timescales. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for an Electrical Fitter to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!
12/04/2024
Full time
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!