Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed: Experience in systems design and engineering, including defining requiirements and supporting product development. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Proving Engineer to work in our team. In this role you will support the team in: Supporting the product development team on their full development lifecycle. Ensuring the final products meets customer requirements Producing and Supporting definition and and success criteria Communicating best practice to other team members. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
19/04/2024
Full time
Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed: Experience in systems design and engineering, including defining requiirements and supporting product development. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Proving Engineer to work in our team. In this role you will support the team in: Supporting the product development team on their full development lifecycle. Ensuring the final products meets customer requirements Producing and Supporting definition and and success criteria Communicating best practice to other team members. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
FIELD SERVICE ENGINEER MEDICAL IMAGING EQUIPMENT The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the West of Ireland. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. You will be required to take part in an out of hours on call rota 1 in every 6 weeks, paid at 200EUR per week. The Location This role will predominantly involve travel in and around the Cork and Kerry ares and so ideally applicants will live within 45mins of Cork. However, flexibility to travel throughout Ireland where necessary will be required. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package 40-55,000EUR per year basic salary 11EUR per day lunch allowance A choice of a company car or car allowance paid at 8,000EUR per year Minimum on call payment of 200EUR per week (1 in 6 weeks) Private pension Life assurance 33 days annual leave (including bank holidays) What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within 34mins of Cork Next steps? Click APPLY NOW for a copy of your CV to be sent to CBSbutler. CVs will be reviewed from 2nd Jan and should you be suitable a CBSbutler representative will be in touch within 3 working days.
19/04/2024
Full time
FIELD SERVICE ENGINEER MEDICAL IMAGING EQUIPMENT The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the West of Ireland. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. You will be required to take part in an out of hours on call rota 1 in every 6 weeks, paid at 200EUR per week. The Location This role will predominantly involve travel in and around the Cork and Kerry ares and so ideally applicants will live within 45mins of Cork. However, flexibility to travel throughout Ireland where necessary will be required. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package 40-55,000EUR per year basic salary 11EUR per day lunch allowance A choice of a company car or car allowance paid at 8,000EUR per year Minimum on call payment of 200EUR per week (1 in 6 weeks) Private pension Life assurance 33 days annual leave (including bank holidays) What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within 34mins of Cork Next steps? Click APPLY NOW for a copy of your CV to be sent to CBSbutler. CVs will be reviewed from 2nd Jan and should you be suitable a CBSbutler representative will be in touch within 3 working days.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
19/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
19/04/2024
Project-based
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
19/04/2024
Project-based
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
I am on the lookout for an experience Field Service Engineer to join my Dublin based client on a permanent basis. My client is leading the way in global security innovation and is the go-to provider for security solutions in over 120 countries so this is a really exciting opportunity for an individual looking for a long-term career opportunity in the sector. As a Field Service Engineer, you'll play a pivotal role in ensuring the seamless operation of complex X-ray and CT-based security systems at airports. From installation to maintenance and repair, you'll deliver top-notch technical support, upholding my clients commitment to service excellence. You will be: Providing on-site technical support for airport security systems. Installing, troubleshooting, repairing, and testing a variety of security equipment. Conducting maintenance, calibration, and radiation surveys. Ensuring compliance with safety protocols and regulations. My client will put you through a comprehensive training programme to get you up to speed when you start with them, but to excel in this role you will need the following: Solid field service experience in integrated systems technologies. Proficiency in maintaining electromechanical systems and High-Voltage Equipment. Strong customer skills and ability to thrive under pressure. Self-starter with a knack for independent work and adaptability to shift environments. Willingness to travel domestically and internationally, with flexible shift availability. Physically capable of lifting This role operates on a 24/7 basis and therefore you will work on a 6-week rotating shift pattern. My client is offering a generous salary of up to €50,000 PLUS a 20% shift allowance and an extensive benefits package that includes private medical insurance, so if you think this could be your next step, get in touch!
19/04/2024
Full time
I am on the lookout for an experience Field Service Engineer to join my Dublin based client on a permanent basis. My client is leading the way in global security innovation and is the go-to provider for security solutions in over 120 countries so this is a really exciting opportunity for an individual looking for a long-term career opportunity in the sector. As a Field Service Engineer, you'll play a pivotal role in ensuring the seamless operation of complex X-ray and CT-based security systems at airports. From installation to maintenance and repair, you'll deliver top-notch technical support, upholding my clients commitment to service excellence. You will be: Providing on-site technical support for airport security systems. Installing, troubleshooting, repairing, and testing a variety of security equipment. Conducting maintenance, calibration, and radiation surveys. Ensuring compliance with safety protocols and regulations. My client will put you through a comprehensive training programme to get you up to speed when you start with them, but to excel in this role you will need the following: Solid field service experience in integrated systems technologies. Proficiency in maintaining electromechanical systems and High-Voltage Equipment. Strong customer skills and ability to thrive under pressure. Self-starter with a knack for independent work and adaptability to shift environments. Willingness to travel domestically and internationally, with flexible shift availability. Physically capable of lifting This role operates on a 24/7 basis and therefore you will work on a 6-week rotating shift pattern. My client is offering a generous salary of up to €50,000 PLUS a 20% shift allowance and an extensive benefits package that includes private medical insurance, so if you think this could be your next step, get in touch!
Job Title: Mechanical Design Engineer Location: Peterborough Duration: Contract Pay Rate: £35/hr. Inside IR35 To work for a global leader in petrol and diesel engine manufacturing that offers the widest choice of dependable, cutting-edge power solutions customised to our clients' exact specifications, iO Associates is seeking a Mechanical Design Engineer. Through a global network of distributors and dealers, they provide engines, parts, and service support to the agricultural, construction, industrial, power generating, rental, material handling, and marine sectors. As a team they produce a wide variety of designs (including couplings, flywheels, engine rigging schemes, rigging equipment, canopies, building layouts and many more) to support multi-platform engine testing in ERDC. Many of their designs are bespoke and follow the Caterpillar design practices. Type of work can be a simple design job like designing a plate to designing complex equipment for test bed upgrades and engine testing. Required Skills CREO and Teamcenter proficiency for design. Basic AutoCAD. Relevant calculations where necessary. (Bolts stress calculations, Shaft suitability etc) Lead design reviews and participate in design discussions and reviews. Wider system knowledge. (Example: - coupling design (Impact of inertia), Look at the bigger picture) Built in safety as part of design. Conducting FMEA, SFMEA & safety risk assessments. Approachable and friendly with a focus on efficiency and velocity. This is an urgent requirement, so if this is of interest, please reply with an up to date CV for more info.
19/04/2024
Project-based
Job Title: Mechanical Design Engineer Location: Peterborough Duration: Contract Pay Rate: £35/hr. Inside IR35 To work for a global leader in petrol and diesel engine manufacturing that offers the widest choice of dependable, cutting-edge power solutions customised to our clients' exact specifications, iO Associates is seeking a Mechanical Design Engineer. Through a global network of distributors and dealers, they provide engines, parts, and service support to the agricultural, construction, industrial, power generating, rental, material handling, and marine sectors. As a team they produce a wide variety of designs (including couplings, flywheels, engine rigging schemes, rigging equipment, canopies, building layouts and many more) to support multi-platform engine testing in ERDC. Many of their designs are bespoke and follow the Caterpillar design practices. Type of work can be a simple design job like designing a plate to designing complex equipment for test bed upgrades and engine testing. Required Skills CREO and Teamcenter proficiency for design. Basic AutoCAD. Relevant calculations where necessary. (Bolts stress calculations, Shaft suitability etc) Lead design reviews and participate in design discussions and reviews. Wider system knowledge. (Example: - coupling design (Impact of inertia), Look at the bigger picture) Built in safety as part of design. Conducting FMEA, SFMEA & safety risk assessments. Approachable and friendly with a focus on efficiency and velocity. This is an urgent requirement, so if this is of interest, please reply with an up to date CV for more info.
A Lead Electronic Design Engineer is now needed for a rapidly growing Engineering company based in Sheffield. The company are working within a niche industry and you will be working on their two main products working with sensors as well as putting forward your ideas for the next gen of their products. As their Lead Electronic Design Engineer you will have had significant experience 5+ years in working in industry throughout the full product life cycle designing in both analogue and digital design. This is a great role if you are looking to work for a company who are looking to hear your thoughts and take on board your advice on best technologies process and implementation as you would be the expert leasing with Firmware, software and mechanical. Therefore you have a high level of autonomy over how the projects are undertaken and best practice for a company who will fully support you. The company offer Hybrid Working with 3 days on site ideally per week as well as flexible working and a host of other benefits. Core skills include:- - Analogue/Digital design - Microcontrollers - Schematics - Design for EMC - PCB Design - Altium - Ability to lead projects - End to End Product life cycle Desirable skills include:- * Firmware * C programming I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
19/04/2024
Full time
A Lead Electronic Design Engineer is now needed for a rapidly growing Engineering company based in Sheffield. The company are working within a niche industry and you will be working on their two main products working with sensors as well as putting forward your ideas for the next gen of their products. As their Lead Electronic Design Engineer you will have had significant experience 5+ years in working in industry throughout the full product life cycle designing in both analogue and digital design. This is a great role if you are looking to work for a company who are looking to hear your thoughts and take on board your advice on best technologies process and implementation as you would be the expert leasing with Firmware, software and mechanical. Therefore you have a high level of autonomy over how the projects are undertaken and best practice for a company who will fully support you. The company offer Hybrid Working with 3 days on site ideally per week as well as flexible working and a host of other benefits. Core skills include:- - Analogue/Digital design - Microcontrollers - Schematics - Design for EMC - PCB Design - Altium - Ability to lead projects - End to End Product life cycle Desirable skills include:- * Firmware * C programming I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Junior Surveillance Mechanical Engineer On-site Somerset - Opportunity to WFH 1 day per week Day Rate £450 - £509 Inside IR35 Around 6 months Responsibilities: . Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning . Ensure the surveillance plan is respected . Review the Follow up Documents and End of Installation reports . Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures ) . Organize your own schedules of surveillance activities with the surveillance leader . Contribute to open points treatments and closure . Participate to progress meetings with installation, projects, suppliers or customers Skills: . Min 1 year experience with technical degree qualification . Manufacturing processes knowledge (welding, foundry, forge ) . Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge . Quality fundamentals knowledge . Ability to read and understand the technical engineering documents of scheme . Fluent English (spoken and written) . Organisation . Capability to defend and explain own observations . Being critical and analytical minded to be able to identify deviations and to contribute to their resolution . Autonomy to manage the surveillance on-site schedule or business trip . Team working . Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. . Knowledge in welding or non destructive testing - desirable. . Training: several months training periods on various localisation in France and Europe. . Some out of hours working will be required
19/04/2024
Project-based
Junior Surveillance Mechanical Engineer On-site Somerset - Opportunity to WFH 1 day per week Day Rate £450 - £509 Inside IR35 Around 6 months Responsibilities: . Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning . Ensure the surveillance plan is respected . Review the Follow up Documents and End of Installation reports . Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures ) . Organize your own schedules of surveillance activities with the surveillance leader . Contribute to open points treatments and closure . Participate to progress meetings with installation, projects, suppliers or customers Skills: . Min 1 year experience with technical degree qualification . Manufacturing processes knowledge (welding, foundry, forge ) . Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge . Quality fundamentals knowledge . Ability to read and understand the technical engineering documents of scheme . Fluent English (spoken and written) . Organisation . Capability to defend and explain own observations . Being critical and analytical minded to be able to identify deviations and to contribute to their resolution . Autonomy to manage the surveillance on-site schedule or business trip . Team working . Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. . Knowledge in welding or non destructive testing - desirable. . Training: several months training periods on various localisation in France and Europe. . Some out of hours working will be required
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
18/04/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Planner required to join Key Tier 2 Project Team This client are undertaking a large mechanical scope of work and producing pipe supports for a highly regulated sectors. An opportunity has arisen within the business unit for a Planner to join the team drafting and maintaining schedules for a large client site. Summary of key duties & responsibilities * Production and maintenance of schedules * Analysis of schedules to ensure most efficient workflow * Critical Path analysis * Leading schedule look heads to ensure timely and proactive delivery * Generating schedule reports as required * Working with the Cost Manager to support the Monthly Cost Report Experience * Experience of Mechanical/Construction Planning. * P6 SQEP. * Experience of site works. Skills & Attributes * Highly skilled in the use of all aspects of P6 * Strong verbal and written communication skills * Good IT literacy. * Work from the office Qualifications * Qualified in P6 * Technical HNC/ONC Qualified advantageous Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy
18/04/2024
Project-based
Planner required to join Key Tier 2 Project Team This client are undertaking a large mechanical scope of work and producing pipe supports for a highly regulated sectors. An opportunity has arisen within the business unit for a Planner to join the team drafting and maintaining schedules for a large client site. Summary of key duties & responsibilities * Production and maintenance of schedules * Analysis of schedules to ensure most efficient workflow * Critical Path analysis * Leading schedule look heads to ensure timely and proactive delivery * Generating schedule reports as required * Working with the Cost Manager to support the Monthly Cost Report Experience * Experience of Mechanical/Construction Planning. * P6 SQEP. * Experience of site works. Skills & Attributes * Highly skilled in the use of all aspects of P6 * Strong verbal and written communication skills * Good IT literacy. * Work from the office Qualifications * Qualified in P6 * Technical HNC/ONC Qualified advantageous Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy
Planner required to join Key Tier 2 Project Team This client are undertaking a large mechanical scope of work and producing pipe supports for a highly regulated sectors. An opportunity has arisen within the business unit for a Planner to join the team drafting and maintaining schedules for a large client site. Summary of key duties & responsibilities * Production and maintenance of schedules * Analysis of schedules to ensure most efficient workflow * Critical Path analysis * Leading schedule look heads to ensure timely and proactive delivery * Generating schedule reports as required * Working with the Cost Manager to support the Monthly Cost Report Experience * Experience of Mechanical/Construction Planning. * P6 SQEP. * Experience of site works. Skills & Attributes * Highly skilled in the use of all aspects of P6 * Strong verbal and written communication skills * Good IT literacy. * Work from the office Qualifications * Qualified in P6 * Technical HNC/ONC Qualified advantageous Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy
18/04/2024
Project-based
Planner required to join Key Tier 2 Project Team This client are undertaking a large mechanical scope of work and producing pipe supports for a highly regulated sectors. An opportunity has arisen within the business unit for a Planner to join the team drafting and maintaining schedules for a large client site. Summary of key duties & responsibilities * Production and maintenance of schedules * Analysis of schedules to ensure most efficient workflow * Critical Path analysis * Leading schedule look heads to ensure timely and proactive delivery * Generating schedule reports as required * Working with the Cost Manager to support the Monthly Cost Report Experience * Experience of Mechanical/Construction Planning. * P6 SQEP. * Experience of site works. Skills & Attributes * Highly skilled in the use of all aspects of P6 * Strong verbal and written communication skills * Good IT literacy. * Work from the office Qualifications * Qualified in P6 * Technical HNC/ONC Qualified advantageous Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £65 per hour (Inside IR35) 12 Month - Contract Key Responsibilities (day to day duties) . Ensuring an understanding of project briefs . Experience in the Design and specification of all Mechanical Building Services systems - heating, cooling, hot and cold water systems, ventilation, controls, etc. . Knowledge of Low Pressure/High Pressure Air, Demin Water, Nitrogen, Local Exhaust Ventilation, Diesel Fuel Supply is not essential but useful. . Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, IES, Hevacomp, in-house developed tools, etc. . Preparing technical specifications using NBS . Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit - note experience of Microstation (& AECOsim) is beneficial . Attendance at meetings with clients and contractors . Site surveys, inspections and monitoring of site works . Report and technical note writing . Maintaining complete records and archives to company standards . Adherence to all quality, environmental and governance processes . Managing elements of project delivery and an understanding of budget costings . Reviewing progress, including reporting any anomalies and changes of scope to the project lead . Contribute to the technical development of junior staff Requirements Essential: . Degree qualified, or equivalent qualification, in Building Services Engineering/Mechanical Engineering or related subjects . Chartered Engineer with CIBSE or IMechE . Familiarity with the principles of building physics such as passive design solutions and fabric first approaches . Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance . Good level of computer literacy in a range of digital tools such as IES thermal modelling package, Navisworks, Hevacomp, One Click, NBS and Microsoft packages Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
17/04/2024
Project-based
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £65 per hour (Inside IR35) 12 Month - Contract Key Responsibilities (day to day duties) . Ensuring an understanding of project briefs . Experience in the Design and specification of all Mechanical Building Services systems - heating, cooling, hot and cold water systems, ventilation, controls, etc. . Knowledge of Low Pressure/High Pressure Air, Demin Water, Nitrogen, Local Exhaust Ventilation, Diesel Fuel Supply is not essential but useful. . Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, IES, Hevacomp, in-house developed tools, etc. . Preparing technical specifications using NBS . Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit - note experience of Microstation (& AECOsim) is beneficial . Attendance at meetings with clients and contractors . Site surveys, inspections and monitoring of site works . Report and technical note writing . Maintaining complete records and archives to company standards . Adherence to all quality, environmental and governance processes . Managing elements of project delivery and an understanding of budget costings . Reviewing progress, including reporting any anomalies and changes of scope to the project lead . Contribute to the technical development of junior staff Requirements Essential: . Degree qualified, or equivalent qualification, in Building Services Engineering/Mechanical Engineering or related subjects . Chartered Engineer with CIBSE or IMechE . Familiarity with the principles of building physics such as passive design solutions and fabric first approaches . Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance . Good level of computer literacy in a range of digital tools such as IES thermal modelling package, Navisworks, Hevacomp, One Click, NBS and Microsoft packages Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
Omron PLC Programming Trainer Rate - £500-£550 per day Outside IR35 Fully remote (UK based) The ECS resource group are assisting a client on a search for an experienced instructor to lead a live training course of Omron PLC Programming to an audience of Electrical Specialists, Mechanical Engineers, Programmers with interest in Industrial Automation It Is a live led course over the course of 3 days. By the end of the training course, participants will be fully knowledgeable in the following: Fundamental concept of PLC's Application fields Different PLC types Programming OMRON PLCs in Lader Diagram (LAD) The programming software Hardware setup Memory areas Basic bitlogic LAD instructions Latch circuit Controlling pneumatic cylinders with PLC Individual exercises Further details available upon application ECS Recruitment Group Ltd is acting as an Employment Business in relation to this vacancy.
17/04/2024
Project-based
Omron PLC Programming Trainer Rate - £500-£550 per day Outside IR35 Fully remote (UK based) The ECS resource group are assisting a client on a search for an experienced instructor to lead a live training course of Omron PLC Programming to an audience of Electrical Specialists, Mechanical Engineers, Programmers with interest in Industrial Automation It Is a live led course over the course of 3 days. By the end of the training course, participants will be fully knowledgeable in the following: Fundamental concept of PLC's Application fields Different PLC types Programming OMRON PLCs in Lader Diagram (LAD) The programming software Hardware setup Memory areas Basic bitlogic LAD instructions Latch circuit Controlling pneumatic cylinders with PLC Individual exercises Further details available upon application ECS Recruitment Group Ltd is acting as an Employment Business in relation to this vacancy.
Job title : Data Facility Engineer _ Mandarin speaking Our client, a leading telecommunications company, is looking for a data center engineer to join its site in Newport, Wales. Location : Newport, Wales What you will do: Manage and supervise the day-to-day operations and maintenance of mechanical and electrical equipment in a data center. Identify risks and perform IDC vendor operation and maintenance quality assessment. Perform RCA(root cause analysis) of critical equipment failures Troubleshoot and report of facility and data sever-level events within internal SLA Provide training and guidance to operation team, such as MOP,SOP,EOP Ensure all EHS procedures are adhered to by vendor and internal staff Communicate complex technical information to non-technical audiences Follow the instructions to verify the IDC supplier's acceptance of the cabinet and on-site data center hosting service (racks/power/cooling) delivery confirmation. Responsible for the operation and maintenance of the cloud data center site, responsible for on-site reliability and associate project delivery The ideal candidate: 1+ years of relevant work experience in a data center or other critical environment or 1+ years of technical training or experience with relevant data center facilities equipment Bachelors or above in applicable engineering field or mechanical or electrical Electrical or mechanical License in the UK Strong verbal and written communication skills Solid leadership and organizational skills Proven self-starter Ability to prioritize in a complex, fast-paced environment Base in the UK, would be able to travel to other countries. Holding a valid UK Driving licence Project People is acting as an Employment Business in relation to this vacancy.
17/04/2024
Project-based
Job title : Data Facility Engineer _ Mandarin speaking Our client, a leading telecommunications company, is looking for a data center engineer to join its site in Newport, Wales. Location : Newport, Wales What you will do: Manage and supervise the day-to-day operations and maintenance of mechanical and electrical equipment in a data center. Identify risks and perform IDC vendor operation and maintenance quality assessment. Perform RCA(root cause analysis) of critical equipment failures Troubleshoot and report of facility and data sever-level events within internal SLA Provide training and guidance to operation team, such as MOP,SOP,EOP Ensure all EHS procedures are adhered to by vendor and internal staff Communicate complex technical information to non-technical audiences Follow the instructions to verify the IDC supplier's acceptance of the cabinet and on-site data center hosting service (racks/power/cooling) delivery confirmation. Responsible for the operation and maintenance of the cloud data center site, responsible for on-site reliability and associate project delivery The ideal candidate: 1+ years of relevant work experience in a data center or other critical environment or 1+ years of technical training or experience with relevant data center facilities equipment Bachelors or above in applicable engineering field or mechanical or electrical Electrical or mechanical License in the UK Strong verbal and written communication skills Solid leadership and organizational skills Proven self-starter Ability to prioritize in a complex, fast-paced environment Base in the UK, would be able to travel to other countries. Holding a valid UK Driving licence Project People is acting as an Employment Business in relation to this vacancy.
Required for an initial six month Full time contract in Sweden, a Process Equipment Installation Engineer. Key Responsibilities: 1. Technical Installation Supervision & Contractor Management: Supervise installation of process equipment by suppliers to ensure compliance to schedule, quality and safety. Resolve any technical/engineering issues and escalate where necessary. 2. Site Coordination: Coordinate activities with other interfacing groups and contractors with overlapping works 3. HSE & Risk Management: Actively manage HSE and risk, implementing safety measures and quality standards throughout installation. 4. Communication: Lead and minute daily toolbox meetings, weekly progress meetings, and internal coordination meetings. Work with Planner/Scheduler to keep integrated schedule up to date and report on progress. Escalate issues in the field where appropriate through clear and concise communications, and where required issue non-compliance reports and follow up on resolution. 5. Installation Handover: Develop comprehensive completions plan for equipment installation and facilitate a smooth handover to commissioning team Experience: 1. Bachelor's or master's degree in mechanical engineering/electrical engineering, or similar, or extensive relevant work experience. 2. 5+ years of hands-on experience with installing, commissioning and/or troubleshooting process/manufacturing equipment 3. Excellent English written and oral skills, fluency in other languages is a plus (Mandarin, Korean) Personal Attributes: 1. Able to work within and communicate effectively and concisely in a multi-cultural team environment 2. Good problem solving and negotiation skills 3. Energetic and able to handle stress while maintaining a friendly and professional demeanor 4. Ownership in solving issues and a 'can-do' attitude 5. Methodical and structured way of working To arrange a Teams-based interview, please email in the first instance, your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
17/04/2024
Project-based
Required for an initial six month Full time contract in Sweden, a Process Equipment Installation Engineer. Key Responsibilities: 1. Technical Installation Supervision & Contractor Management: Supervise installation of process equipment by suppliers to ensure compliance to schedule, quality and safety. Resolve any technical/engineering issues and escalate where necessary. 2. Site Coordination: Coordinate activities with other interfacing groups and contractors with overlapping works 3. HSE & Risk Management: Actively manage HSE and risk, implementing safety measures and quality standards throughout installation. 4. Communication: Lead and minute daily toolbox meetings, weekly progress meetings, and internal coordination meetings. Work with Planner/Scheduler to keep integrated schedule up to date and report on progress. Escalate issues in the field where appropriate through clear and concise communications, and where required issue non-compliance reports and follow up on resolution. 5. Installation Handover: Develop comprehensive completions plan for equipment installation and facilitate a smooth handover to commissioning team Experience: 1. Bachelor's or master's degree in mechanical engineering/electrical engineering, or similar, or extensive relevant work experience. 2. 5+ years of hands-on experience with installing, commissioning and/or troubleshooting process/manufacturing equipment 3. Excellent English written and oral skills, fluency in other languages is a plus (Mandarin, Korean) Personal Attributes: 1. Able to work within and communicate effectively and concisely in a multi-cultural team environment 2. Good problem solving and negotiation skills 3. Energetic and able to handle stress while maintaining a friendly and professional demeanor 4. Ownership in solving issues and a 'can-do' attitude 5. Methodical and structured way of working To arrange a Teams-based interview, please email in the first instance, your CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
16/04/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
15/04/2024
Full time
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
Role: Head of Product Salary: £60,000 - £75,000 approximately Location: Dundee Onsite 3x days per week Role description and purpose The Head of Product is a critical role. It's purpose is to deliver innovation pipeline; organising, supporting, mentoring and managing a group of dedicated professionals to deliver a series of new propositions that will contribute towards our ambition to deliver integrated solutions that support smart farming and processing operations. We have a number of propositions in development including a biomass camera, a sea-lice treatment system, a seal detection camera, a novel pump and a waterjet bleeder. These propositions are at various stages of development but share the need to be driven through development to deliver manufacturing ready outcomes. Delivery of these outcomes is critical to our ambition to become a leading provider of value-adding solutions to customers throughout the world. The range of activity to be overseen by the Head of Product extends from verification of market need, through prototyping, to the development and documentation of specifications for manufacturing. Development leadership requires an understanding of the constituent elements of each proposition, including software, electronics, mechanical and power engineering. As well as a capable in-house development team, we has an established network of partners within its supply chain that can be tapped to introduce additional capability and capacity. This role will require significant contact with all members of the senior management team and reports to the Chief Operating Officer. Responsibilities of the role Provide leadership to the company's product team and to those within the supply chain involved in supporting the development of products Support the continuous development of the product team, ensuring that skills and capacity are aligned with the delivery objectives from this business unit Plan for and implement a process that achieves the transition of knowledge and capability from the more experienced members of the product team to new employees Actively manage the relationship between and our 3rd party manufacting units, to ensure quality and timely delivery. Focusing on the documentation, design artifacts and quality reporting. Liaise with marketing department (and third parties as required) to gather intelligence on customer requirements and case studies Own responsibility for delivering next generation propositions Support the transfer of new proposition designs to manufacturing business unit, to include the provision of all documentation required to build and safely operate the equipment Schedule and define draft budgets for the activities of the product team Maintain an up to date understanding of the regulatory environments within which operates and ensure that new product designs do not breach regulations Promote a culture of health and safety Define OKRs relevant to the role, agree goals with the COO, and deliver Provide periodical reports to the COO on progress against OKRs Experience & Skills: Relevant degree with an engineering background and prior experience of owning the delivery of new value propositions within a fast moving SME environment Ability to effectively work on the delivery of multiple new propositions simultaneously Ability to apply business knowledge to real-world scenarios Leadership capability and effective people manager Planning and management skills Strategic thinker capable of making a meaningful contribution to the direction of the business Problem solving skills and analytical mindset Understanding of budgeting process and financial management Excellent communication skills Pro-active and self-starting Ability to assimilate detailed product knowledge and to disseminate this within the team and to third party supporters as required Presentation capability: written and verbal Technical competencies: Project & task management People management Facilitation & change management Strategic leadership How To Apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
15/04/2024
Full time
Role: Head of Product Salary: £60,000 - £75,000 approximately Location: Dundee Onsite 3x days per week Role description and purpose The Head of Product is a critical role. It's purpose is to deliver innovation pipeline; organising, supporting, mentoring and managing a group of dedicated professionals to deliver a series of new propositions that will contribute towards our ambition to deliver integrated solutions that support smart farming and processing operations. We have a number of propositions in development including a biomass camera, a sea-lice treatment system, a seal detection camera, a novel pump and a waterjet bleeder. These propositions are at various stages of development but share the need to be driven through development to deliver manufacturing ready outcomes. Delivery of these outcomes is critical to our ambition to become a leading provider of value-adding solutions to customers throughout the world. The range of activity to be overseen by the Head of Product extends from verification of market need, through prototyping, to the development and documentation of specifications for manufacturing. Development leadership requires an understanding of the constituent elements of each proposition, including software, electronics, mechanical and power engineering. As well as a capable in-house development team, we has an established network of partners within its supply chain that can be tapped to introduce additional capability and capacity. This role will require significant contact with all members of the senior management team and reports to the Chief Operating Officer. Responsibilities of the role Provide leadership to the company's product team and to those within the supply chain involved in supporting the development of products Support the continuous development of the product team, ensuring that skills and capacity are aligned with the delivery objectives from this business unit Plan for and implement a process that achieves the transition of knowledge and capability from the more experienced members of the product team to new employees Actively manage the relationship between and our 3rd party manufacting units, to ensure quality and timely delivery. Focusing on the documentation, design artifacts and quality reporting. Liaise with marketing department (and third parties as required) to gather intelligence on customer requirements and case studies Own responsibility for delivering next generation propositions Support the transfer of new proposition designs to manufacturing business unit, to include the provision of all documentation required to build and safely operate the equipment Schedule and define draft budgets for the activities of the product team Maintain an up to date understanding of the regulatory environments within which operates and ensure that new product designs do not breach regulations Promote a culture of health and safety Define OKRs relevant to the role, agree goals with the COO, and deliver Provide periodical reports to the COO on progress against OKRs Experience & Skills: Relevant degree with an engineering background and prior experience of owning the delivery of new value propositions within a fast moving SME environment Ability to effectively work on the delivery of multiple new propositions simultaneously Ability to apply business knowledge to real-world scenarios Leadership capability and effective people manager Planning and management skills Strategic thinker capable of making a meaningful contribution to the direction of the business Problem solving skills and analytical mindset Understanding of budgeting process and financial management Excellent communication skills Pro-active and self-starting Ability to assimilate detailed product knowledge and to disseminate this within the team and to third party supporters as required Presentation capability: written and verbal Technical competencies: Project & task management People management Facilitation & change management Strategic leadership How To Apply? Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen + Gym onsite Experience needed: Experience in assembling mechanical components from smaller fixtures to larger and more complex systems. As well as this, it is essential the successful Mechanical Manufacturing Technician is able to complete and certify hardware builds by following detailed planning instructions and drawings. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Mechanical Manufacturing Technician to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Communicating best practice to other team members. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
15/04/2024
Full time
Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen + Gym onsite Experience needed: Experience in assembling mechanical components from smaller fixtures to larger and more complex systems. As well as this, it is essential the successful Mechanical Manufacturing Technician is able to complete and certify hardware builds by following detailed planning instructions and drawings. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Mechanical Manufacturing Technician to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Communicating best practice to other team members. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!