Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
23/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
Are you an apprentice graduate in electrical engineering or systems engineering, or perhaps an ex-Navy Weapons Engineer looking to transition your skills into a dynamic civilian role? Look no further! We have the perfect opportunity for you to propel your career in the direction of electrical and systems design. About our client: Join a forward-thinking company that values expertise and innovation. Defence experience isn't essential - your skills and potential are what matter most to us. Location: Portsmouth Role Overview: As a Systems Electrical Integration Specialist, you'll be at the forefront of cutting-edge projects, focusing on the integration of Commercial Off-The-Shelf (COTS) and MOD systems. Your responsibilities will span a range of OEM Systems, including Medium Calibre Guns, Sensors (Fire Control & Surveillance), Radar, Electronic Warfare Systems, and Combat Management Systems (CMS). What We're Looking For: Candidates emerging from an apprenticeship (HNC level) in electrical or systems engineering, or ex-Navy Weapons Engineers. Passion for electrical and systems design. Strong understanding of Electrical Systems/Engineering theory. Willingness to learn and adapt - while prior design experience isn't necessary, a desire to grow and develop within the role is essential. Key Responsibilities: Production of Installation Solution Packs, encompassing Electrical/System Drawings, Penetrations, Cable Data Sheets, Bill of Materials, and associated Installation Instructions. Collaborate with multidisciplinary teams to ensure seamless integration of systems. Drive innovation and efficiency in system integration processes. What our client offers: Comprehensive training on tools such as AutoCAD, SolidWorks, Foran, and more. Opportunities for professional growth and development. A supportive and collaborative work environment where your ideas are valued. Competitive compensation package with excellent benefits. Ready to Take the Next Step? If you're ready to embark on an exciting journey in systems electrical integration and contribute to ground-breaking projects, we want to hear from you! Please be advised this position will require the successful candidate to undergo SC Security Clearance. Apply now and unleash your potential with us.
23/04/2024
Full time
Are you an apprentice graduate in electrical engineering or systems engineering, or perhaps an ex-Navy Weapons Engineer looking to transition your skills into a dynamic civilian role? Look no further! We have the perfect opportunity for you to propel your career in the direction of electrical and systems design. About our client: Join a forward-thinking company that values expertise and innovation. Defence experience isn't essential - your skills and potential are what matter most to us. Location: Portsmouth Role Overview: As a Systems Electrical Integration Specialist, you'll be at the forefront of cutting-edge projects, focusing on the integration of Commercial Off-The-Shelf (COTS) and MOD systems. Your responsibilities will span a range of OEM Systems, including Medium Calibre Guns, Sensors (Fire Control & Surveillance), Radar, Electronic Warfare Systems, and Combat Management Systems (CMS). What We're Looking For: Candidates emerging from an apprenticeship (HNC level) in electrical or systems engineering, or ex-Navy Weapons Engineers. Passion for electrical and systems design. Strong understanding of Electrical Systems/Engineering theory. Willingness to learn and adapt - while prior design experience isn't necessary, a desire to grow and develop within the role is essential. Key Responsibilities: Production of Installation Solution Packs, encompassing Electrical/System Drawings, Penetrations, Cable Data Sheets, Bill of Materials, and associated Installation Instructions. Collaborate with multidisciplinary teams to ensure seamless integration of systems. Drive innovation and efficiency in system integration processes. What our client offers: Comprehensive training on tools such as AutoCAD, SolidWorks, Foran, and more. Opportunities for professional growth and development. A supportive and collaborative work environment where your ideas are valued. Competitive compensation package with excellent benefits. Ready to Take the Next Step? If you're ready to embark on an exciting journey in systems electrical integration and contribute to ground-breaking projects, we want to hear from you! Please be advised this position will require the successful candidate to undergo SC Security Clearance. Apply now and unleash your potential with us.
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
23/04/2024
Project-based
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
My client, a leading multinational defence company, are currently seeking a Principal Engineer/Technical Designer to join the business in a permanent capacity. The role is based out of my client's secure site in New Malden. It is offered on a hybrid basis, 2-3 days a week on site. Due to the nature of my clients work, candidates must either hold a live SC Clearance or be willing and able to undergo the clearance process. The principal engineer will design and implement information systems to support the business Share infrastructure. This candidate will ensure that all systems are working at optimal levels and support the development of new technologies and system requirements. To accomplish their core duty of designing and implementing complex computer systems, this candidate will be responsible for many tasks including: Leads the design and review processes, developing and documenting the proposed technical design for the integration and implementation. Create detailed plans for the integration of new systems architecture into existing infrastructure/systems. This includes logistical plans for the Operations teams to actually conduct the physical integrations, during which the candidate provides technical direction and support Analysing existing systems to ensure they offer adequate security and are effectively meeting the needs of systems/subsystems. They coordinate with all systems and subsystems teams to see that the system of systems is working optimally. They also analyse requirements to identify where they can integrate new hardware, operating systems, or connectivity solutions. Based on their knowledge of infrastructure, systems and their analysis of the systems' needs, the candidate may recommend alternative technologies or improvements to enhance systems to support Share infrastructure teams goals. Core skills: Experience with a broad range of technologies and building roadmaps Experience designing, integrating and managing complex infrastructure solutions Experience producing design documentation and associated governance and assurance processes Ability to provide technical system solutions, determine overall design direction and provide hardware recommendations for complex technical issues Experience planning and developing support processes and adhering to best practices Strong written and oral communication skills, and the ability to effectively communicate with technical and non-technical audiences Advanced skills: Knowledge of server Operating Systems (Windows, Linux, Unix etc) Knowledge of VMWARE and Virtualisation technologies (VMware Horizon, Citrix Xen Desktop) Knowledge of SAN and Storage Networks Knowledge of network technologies. Synergize Consulting is committed to equality and diversity in our workplace. Synergize Consulting provides equal employment opportunity to all employees and applicants without regard to an individual's protected status, including race/ethnic origin, colour, nationality, national origin, ancestry, sex/gender, gender identity/expression, gender reassignment, sexual orientation, marriage/civil partnership, pregnancy/maternity, religion or belief, age, disability, or any other protected status or characteristic
22/04/2024
Full time
My client, a leading multinational defence company, are currently seeking a Principal Engineer/Technical Designer to join the business in a permanent capacity. The role is based out of my client's secure site in New Malden. It is offered on a hybrid basis, 2-3 days a week on site. Due to the nature of my clients work, candidates must either hold a live SC Clearance or be willing and able to undergo the clearance process. The principal engineer will design and implement information systems to support the business Share infrastructure. This candidate will ensure that all systems are working at optimal levels and support the development of new technologies and system requirements. To accomplish their core duty of designing and implementing complex computer systems, this candidate will be responsible for many tasks including: Leads the design and review processes, developing and documenting the proposed technical design for the integration and implementation. Create detailed plans for the integration of new systems architecture into existing infrastructure/systems. This includes logistical plans for the Operations teams to actually conduct the physical integrations, during which the candidate provides technical direction and support Analysing existing systems to ensure they offer adequate security and are effectively meeting the needs of systems/subsystems. They coordinate with all systems and subsystems teams to see that the system of systems is working optimally. They also analyse requirements to identify where they can integrate new hardware, operating systems, or connectivity solutions. Based on their knowledge of infrastructure, systems and their analysis of the systems' needs, the candidate may recommend alternative technologies or improvements to enhance systems to support Share infrastructure teams goals. Core skills: Experience with a broad range of technologies and building roadmaps Experience designing, integrating and managing complex infrastructure solutions Experience producing design documentation and associated governance and assurance processes Ability to provide technical system solutions, determine overall design direction and provide hardware recommendations for complex technical issues Experience planning and developing support processes and adhering to best practices Strong written and oral communication skills, and the ability to effectively communicate with technical and non-technical audiences Advanced skills: Knowledge of server Operating Systems (Windows, Linux, Unix etc) Knowledge of VMWARE and Virtualisation technologies (VMware Horizon, Citrix Xen Desktop) Knowledge of SAN and Storage Networks Knowledge of network technologies. Synergize Consulting is committed to equality and diversity in our workplace. Synergize Consulting provides equal employment opportunity to all employees and applicants without regard to an individual's protected status, including race/ethnic origin, colour, nationality, national origin, ancestry, sex/gender, gender identity/expression, gender reassignment, sexual orientation, marriage/civil partnership, pregnancy/maternity, religion or belief, age, disability, or any other protected status or characteristic
My client, a leading multinational defence company, are currently seeking a senior engineer/systems engineer to join the business in a permanent capacity. The role is based out of my client's secure site in Portsmouth. - with the requirement to attend site 2-3 days a week. Due to the nature of my clients work, candidates must either hold a live SC Clearance or be willing and able to undergo the clearance process. Key Accountabilities and Responsibilities: Provide SME level advice and consultancy on solution design, critical problem areas, training and related areas Design, build, configuration and test of Infrastructure/Systems Build for operations, implement/administer/configuration systems and hardware that are consistently stable, reliable and requirements. Learn the Production Integration Process and assume responsibilities for ensuring a smooth transition for relevant Systems from development to production. Working proactively to ensure problems do not occur through monitoring and optimising performance. Liaise with various other Systems teams to create appropriate knowledge Advanced skills: Knowledge of server Operating Systems (Windows, Linux, Unix etc) Knowledge of VMWARE and Virtualisation technologies (VMware Horizon, Citrix Xen Desktop) Knowledge of SAN and Storage Networks Knowledge of network technologies. Synergize Consulting is committed to equality and diversity in our workplace. Synergize Consulting provides equal employment opportunity to all employees and applicants without regard to an individual's protected status, including race/ethnic origin, colour, nationality, national origin, ancestry, sex/gender, gender identity/expression, gender reassignment, sexual orientation, marriage/civil partnership, pregnancy/maternity, religion or belief, age, disability, or any other protected status or characteristic
22/04/2024
Full time
My client, a leading multinational defence company, are currently seeking a senior engineer/systems engineer to join the business in a permanent capacity. The role is based out of my client's secure site in Portsmouth. - with the requirement to attend site 2-3 days a week. Due to the nature of my clients work, candidates must either hold a live SC Clearance or be willing and able to undergo the clearance process. Key Accountabilities and Responsibilities: Provide SME level advice and consultancy on solution design, critical problem areas, training and related areas Design, build, configuration and test of Infrastructure/Systems Build for operations, implement/administer/configuration systems and hardware that are consistently stable, reliable and requirements. Learn the Production Integration Process and assume responsibilities for ensuring a smooth transition for relevant Systems from development to production. Working proactively to ensure problems do not occur through monitoring and optimising performance. Liaise with various other Systems teams to create appropriate knowledge Advanced skills: Knowledge of server Operating Systems (Windows, Linux, Unix etc) Knowledge of VMWARE and Virtualisation technologies (VMware Horizon, Citrix Xen Desktop) Knowledge of SAN and Storage Networks Knowledge of network technologies. Synergize Consulting is committed to equality and diversity in our workplace. Synergize Consulting provides equal employment opportunity to all employees and applicants without regard to an individual's protected status, including race/ethnic origin, colour, nationality, national origin, ancestry, sex/gender, gender identity/expression, gender reassignment, sexual orientation, marriage/civil partnership, pregnancy/maternity, religion or belief, age, disability, or any other protected status or characteristic
My client, a leading multinational defence company, are currently seeking a senior engineer/systems engineer to join the business in a permanent capacity. The role is based out of my client's secure site in New Malden. - with the requirement to attend site 2-3 days a week. Due to the nature of my clients work, candidates must either hold a live SC Clearance or be willing and able to undergo the clearance process. Key Accountabilities and Responsibilities: Provide SME level advice and consultancy on solution design, critical problem areas, training and related areas Design, build, configuration and test of Infrastructure/Systems Build for operations, implement/administer/configuration systems and hardware that are consistently stable, reliable and requirements. Learn the Production Integration Process and assume responsibilities for ensuring a smooth transition for relevant Systems from development to production. Working proactively to ensure problems do not occur through monitoring and optimising performance. Liaise with various other Systems teams to create appropriate knowledge Advanced skills: Knowledge of server Operating Systems (Windows, Linux, Unix etc) Knowledge of VMWARE and Virtualisation technologies (VMware Horizon, Citrix Xen Desktop) Knowledge of SAN and Storage Networks Knowledge of network technologies. Synergize Consulting is committed to equality and diversity in our workplace. Synergize Consulting provides equal employment opportunity to all employees and applicants without regard to an individual's protected status, including race/ethnic origin, colour, nationality, national origin, ancestry, sex/gender, gender identity/expression, gender reassignment, sexual orientation, marriage/civil partnership, pregnancy/maternity, religion or belief, age, disability, or any other protected status or characteristic
22/04/2024
Full time
My client, a leading multinational defence company, are currently seeking a senior engineer/systems engineer to join the business in a permanent capacity. The role is based out of my client's secure site in New Malden. - with the requirement to attend site 2-3 days a week. Due to the nature of my clients work, candidates must either hold a live SC Clearance or be willing and able to undergo the clearance process. Key Accountabilities and Responsibilities: Provide SME level advice and consultancy on solution design, critical problem areas, training and related areas Design, build, configuration and test of Infrastructure/Systems Build for operations, implement/administer/configuration systems and hardware that are consistently stable, reliable and requirements. Learn the Production Integration Process and assume responsibilities for ensuring a smooth transition for relevant Systems from development to production. Working proactively to ensure problems do not occur through monitoring and optimising performance. Liaise with various other Systems teams to create appropriate knowledge Advanced skills: Knowledge of server Operating Systems (Windows, Linux, Unix etc) Knowledge of VMWARE and Virtualisation technologies (VMware Horizon, Citrix Xen Desktop) Knowledge of SAN and Storage Networks Knowledge of network technologies. Synergize Consulting is committed to equality and diversity in our workplace. Synergize Consulting provides equal employment opportunity to all employees and applicants without regard to an individual's protected status, including race/ethnic origin, colour, nationality, national origin, ancestry, sex/gender, gender identity/expression, gender reassignment, sexual orientation, marriage/civil partnership, pregnancy/maternity, religion or belief, age, disability, or any other protected status or characteristic
Senior Systems Engineering Consultant Multiple locations available - Bristol, Manchester, Aldershot, Reading, Silchester Hybrid available (50/50 split) £35,000 - £60,000 + excellent Benefits + joining bonus Join us as a Senior Systems Engineering Consultant in Aerospace, Defence, Security and Technology. You'll work with teams that use Systems Thinking to analyse, assess and develop solutions to their most complex challenges. Underpinned by a Model Based Systems Engineering (MBSE) ethos, you will help our clients unlock their full potential to innovate. We have a huge variety of projects, ranging from niche consultancy projects to large, high-profile programmes. So, you'll always be able to keep yourself challenged. Your Purpose - Senior Systems Engineering Consultant Provide consultancy to client project and engineering managers. Lead the use of best practice techniques and tools on client and internal projects. Champion a Model Based Systems Engineering (MBSE) approach to solving client issues. Develop and implement strategies to achieve successful client decision milestones. Deliver identified engineering outputs within time, cost, and quality constraints as part of an engineering service to a client. Proactively identify opportunities and contribute to ADS&T growth. Contribute to the development of our people through mentoring and coaching. A commensurate level of senior experience in any of these areas - Senior Systems Engineering Consultant The use of MBSE approaches and tools (eg Sparx EA, Cameo). Knowledge of modelling languages and architecture frameworks, eg, UML/SysML, ArchiMate, TOGAF, MODAF. Requirements engineering and its link to verification and validation. Knowledge of engineering life cycles, their selection, tailoring and implementation. Working on the integration of complex systems, including military civilian platforms (submarines, aircraft, ships, and vehicles), civilian aircraft systems and advanced power and energy systems. Applying systems engineering processes (eg, ISO 15288:2023) across the life cycle. Managing projects and teams within different development methods. Understanding of engineering within the MOD's acquisition framework, Knowledge in Defence (KiD). Strong interpersonal skills and able to build trusted relationships. Ability to understand, simplify and explain subject matter to non-engineers and senior stakeholders.
22/04/2024
Full time
Senior Systems Engineering Consultant Multiple locations available - Bristol, Manchester, Aldershot, Reading, Silchester Hybrid available (50/50 split) £35,000 - £60,000 + excellent Benefits + joining bonus Join us as a Senior Systems Engineering Consultant in Aerospace, Defence, Security and Technology. You'll work with teams that use Systems Thinking to analyse, assess and develop solutions to their most complex challenges. Underpinned by a Model Based Systems Engineering (MBSE) ethos, you will help our clients unlock their full potential to innovate. We have a huge variety of projects, ranging from niche consultancy projects to large, high-profile programmes. So, you'll always be able to keep yourself challenged. Your Purpose - Senior Systems Engineering Consultant Provide consultancy to client project and engineering managers. Lead the use of best practice techniques and tools on client and internal projects. Champion a Model Based Systems Engineering (MBSE) approach to solving client issues. Develop and implement strategies to achieve successful client decision milestones. Deliver identified engineering outputs within time, cost, and quality constraints as part of an engineering service to a client. Proactively identify opportunities and contribute to ADS&T growth. Contribute to the development of our people through mentoring and coaching. A commensurate level of senior experience in any of these areas - Senior Systems Engineering Consultant The use of MBSE approaches and tools (eg Sparx EA, Cameo). Knowledge of modelling languages and architecture frameworks, eg, UML/SysML, ArchiMate, TOGAF, MODAF. Requirements engineering and its link to verification and validation. Knowledge of engineering life cycles, their selection, tailoring and implementation. Working on the integration of complex systems, including military civilian platforms (submarines, aircraft, ships, and vehicles), civilian aircraft systems and advanced power and energy systems. Applying systems engineering processes (eg, ISO 15288:2023) across the life cycle. Managing projects and teams within different development methods. Understanding of engineering within the MOD's acquisition framework, Knowledge in Defence (KiD). Strong interpersonal skills and able to build trusted relationships. Ability to understand, simplify and explain subject matter to non-engineers and senior stakeholders.