A Senior Electronics Design Engineer is now needed for my Sheffield based client working on unique technology and working at their Headquarters. As their Senior Electronic Design Engineer you will be playing a pivotal role in the design and development of their products working through the full life cycle from concept through to production. You will be responsible for designing and implementing electronic systems to meet customer requirements and leasing with the firmware and software team. As this role is for a Senior Engineer you will also be expected to mentor/help guide with junior engineers who certainly will value your knowledge and experience, working in a friendly and welcoming environment. This role is ideally based on site with core hours/flexible working. Core skills include:- Electronic Design Analogue/digital/Mixed Circuitry Schematics Verification Leasing with the software teams for integration of hardware Debugging Validation testing PCB Layout Altium Design for EMC Desirable skills include:- SMPS Communication protocols Power Electronics DFMEA Do not worry if you don't have every skill listed the company are really interested in passionate Engineers so please do not hesitate to get in touch, as it would be great to hear from you. I appreciate that you may not have all of the skills listed but if you feel this may be suitable lets have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
27/03/2024
Full time
A Senior Electronics Design Engineer is now needed for my Sheffield based client working on unique technology and working at their Headquarters. As their Senior Electronic Design Engineer you will be playing a pivotal role in the design and development of their products working through the full life cycle from concept through to production. You will be responsible for designing and implementing electronic systems to meet customer requirements and leasing with the firmware and software team. As this role is for a Senior Engineer you will also be expected to mentor/help guide with junior engineers who certainly will value your knowledge and experience, working in a friendly and welcoming environment. This role is ideally based on site with core hours/flexible working. Core skills include:- Electronic Design Analogue/digital/Mixed Circuitry Schematics Verification Leasing with the software teams for integration of hardware Debugging Validation testing PCB Layout Altium Design for EMC Desirable skills include:- SMPS Communication protocols Power Electronics DFMEA Do not worry if you don't have every skill listed the company are really interested in passionate Engineers so please do not hesitate to get in touch, as it would be great to hear from you. I appreciate that you may not have all of the skills listed but if you feel this may be suitable lets have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
People Source Consulting Ltd
Antrim, County Antrim
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
27/03/2024
Full time
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Senior Connectivity Firmware/Test Engineer (Bluetooth Low Energy) 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
25/03/2024
Project-based
Senior Connectivity Firmware/Test Engineer (Bluetooth Low Energy) 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!
25/03/2024
Full time
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!
People Source Consulting Ltd
Antrim, County Antrim
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
22/03/2024
Full time
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Electronic Engineer - Contract - Analogue/Power - Hybrid Cambridge (3 days a week) £60-£110 per hour depending on experience - Outside IR35 8 month Cambridge (working week 37 hours can be performed over 4 days) Our client is seeking talented Electronic Engineer/Design Engineers with strong high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Role: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of analogue circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills Required: Electronics Design experience Analogue Design Experience Experience designing switching power supplies, buck, boost and flyback converters. Experience of communication interfaces and buses - USB, SPI, I2C,MIPI, GPIO Low power circuit design for battery powered products Design for EMC/ESD protection Design for Manufacturing and Test Experience working with radio products would be desirable Lithium battery and charger design experience would be desirable
22/03/2024
Project-based
Electronic Engineer - Contract - Analogue/Power - Hybrid Cambridge (3 days a week) £60-£110 per hour depending on experience - Outside IR35 8 month Cambridge (working week 37 hours can be performed over 4 days) Our client is seeking talented Electronic Engineer/Design Engineers with strong high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Role: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of analogue circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills Required: Electronics Design experience Analogue Design Experience Experience designing switching power supplies, buck, boost and flyback converters. Experience of communication interfaces and buses - USB, SPI, I2C,MIPI, GPIO Low power circuit design for battery powered products Design for EMC/ESD protection Design for Manufacturing and Test Experience working with radio products would be desirable Lithium battery and charger design experience would be desirable
Electronic Engineer - Contract - Analogue and Digital Design - Onsite Cambridge (4 days a week) £60-£110 per hour depending on experience - Outside IR35 8 months Cambridge (working week 37 hours can be performed over 4 days a week onsite) Our client is seeking talented Electronic Engineer/Design Engineers with strong analogue and high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Contract duties include: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of digital baseband circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills required: Experience with Microprocessor and Microcontroller designs Experience with memory sub-systems - eg DDR, NAND, eMMC Experience of communication interfaces and buses - USB, SPI, I2C,MIPI Low power circuit design for battery powered products Experience interacting with SW teams at the device driver level Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector Desirable: Design work relating to radio products Experience of designing for signal integrity Experience with signal and power integrity simulation tools (eg Hyperlynx, Sigrity, ADS, etc.) Experience of high-speed communications interfaces and buses - eg Gigabit Ethernet, USB3.0, PCIe etc Experience of mobile phone/cellular
22/03/2024
Project-based
Electronic Engineer - Contract - Analogue and Digital Design - Onsite Cambridge (4 days a week) £60-£110 per hour depending on experience - Outside IR35 8 months Cambridge (working week 37 hours can be performed over 4 days a week onsite) Our client is seeking talented Electronic Engineer/Design Engineers with strong analogue and high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Contract duties include: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of digital baseband circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills required: Experience with Microprocessor and Microcontroller designs Experience with memory sub-systems - eg DDR, NAND, eMMC Experience of communication interfaces and buses - USB, SPI, I2C,MIPI Low power circuit design for battery powered products Experience interacting with SW teams at the device driver level Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector Desirable: Design work relating to radio products Experience of designing for signal integrity Experience with signal and power integrity simulation tools (eg Hyperlynx, Sigrity, ADS, etc.) Experience of high-speed communications interfaces and buses - eg Gigabit Ethernet, USB3.0, PCIe etc Experience of mobile phone/cellular
A Senior Electronic Design Engineer is now needed to join a company who are expanding their Electronics team. The company are owned by a very stable global business but operate as an SME and work on a variety of projects around intrinsically safe products. As their Senior Electronics Engineer you will be working throughout the full product life cycle and joining at time when they are at the start of projects to see them all the way through to manufacturing as they also manufacture all of their products. The great thing about this company is that they are involved in many different industries giving you excellent exposure to different projects and developing your skills. The company operate on a flexible working policy 3 days on site and 2 from home + Benefits. Core skills for this role include:- 5+ years in designing in both Analogue and Digital Design Schematic Capture PCB Design Microcontrollers PCB Design Layout Alitum or similar Desirable Power supply design High speed digital design Wireless modules/RF experience (eg Wifi, BLE/Bluetooth, RFID) EMC testing, failure analysis Do not worry if you don't have every skill listed the company are really interested in passionate Engineers so please do not hesitate to get in touch, as it would be great to hear from you. I appreciate that you may not have all of the skills listed but if you feel this may be suitable lets have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
22/03/2024
Full time
A Senior Electronic Design Engineer is now needed to join a company who are expanding their Electronics team. The company are owned by a very stable global business but operate as an SME and work on a variety of projects around intrinsically safe products. As their Senior Electronics Engineer you will be working throughout the full product life cycle and joining at time when they are at the start of projects to see them all the way through to manufacturing as they also manufacture all of their products. The great thing about this company is that they are involved in many different industries giving you excellent exposure to different projects and developing your skills. The company operate on a flexible working policy 3 days on site and 2 from home + Benefits. Core skills for this role include:- 5+ years in designing in both Analogue and Digital Design Schematic Capture PCB Design Microcontrollers PCB Design Layout Alitum or similar Desirable Power supply design High speed digital design Wireless modules/RF experience (eg Wifi, BLE/Bluetooth, RFID) EMC testing, failure analysis Do not worry if you don't have every skill listed the company are really interested in passionate Engineers so please do not hesitate to get in touch, as it would be great to hear from you. I appreciate that you may not have all of the skills listed but if you feel this may be suitable lets have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Analog Design Engineer For a client in the Netherlands, we are looking for an Analog, mixed-signal consultant to work on a long-term project. We are looking for someone wiht knowledge, understanding and experience of analog electronics: - Extremely low noise - Low power - High reliability The start-date is not immediate, so please get in touch if you are interested in hearing more details.
22/03/2024
Analog Design Engineer For a client in the Netherlands, we are looking for an Analog, mixed-signal consultant to work on a long-term project. We are looking for someone wiht knowledge, understanding and experience of analog electronics: - Extremely low noise - Low power - High reliability The start-date is not immediate, so please get in touch if you are interested in hearing more details.
C++ Software Engineer/GUI/Open GL/Manchester My client is super passionate about bringing music to everyone globally. They believe music is an intrinsic past of being a human and are committed to making music accessible to everyone, regardless of background, identity, or wealth. Their mission is to bring people together and empower them through the universal language of music. Are you passionate about music? Do you make music? Are you like me, a dabbler with audio engineering tools? If so, read on. I'm excited to be coming to the market with a C++ Software Engineer for them Qualifications, Minimum Degree in Electronic Engineering, Computer Science or similar Minimum of 5 years' C++ development experience, preferably in an Embedded environment C+, ideally C+ or later Qualifications, Preferred Embedded application development, preferably in a Linux environment Experience of using C++ Standard Library and Boost Experience of developing GUI applications Knowledge of OpenGL useful Experience of Windows, macOS application development useful Experience of music/audio technology useful Tools Git Linux Azure DevOps GCC toolchain Conan CMake GDB C++ Software Engineer/GUI/Open GL/Manchester
21/03/2024
Full time
C++ Software Engineer/GUI/Open GL/Manchester My client is super passionate about bringing music to everyone globally. They believe music is an intrinsic past of being a human and are committed to making music accessible to everyone, regardless of background, identity, or wealth. Their mission is to bring people together and empower them through the universal language of music. Are you passionate about music? Do you make music? Are you like me, a dabbler with audio engineering tools? If so, read on. I'm excited to be coming to the market with a C++ Software Engineer for them Qualifications, Minimum Degree in Electronic Engineering, Computer Science or similar Minimum of 5 years' C++ development experience, preferably in an Embedded environment C+, ideally C+ or later Qualifications, Preferred Embedded application development, preferably in a Linux environment Experience of using C++ Standard Library and Boost Experience of developing GUI applications Knowledge of OpenGL useful Experience of Windows, macOS application development useful Experience of music/audio technology useful Tools Git Linux Azure DevOps GCC toolchain Conan CMake GDB C++ Software Engineer/GUI/Open GL/Manchester
People Source Consulting Ltd
St. Austell, Cornwall
Job Title: High Power Frequency Radio Engineer - Wireless Power Transfer for Electric Vehicles (WPT-EV) Salary: £35 - £45k Benefits: 28 Days Holiday + excellent work life balance with flexible working hours. Contract Type: Permanent Location: St. Austell, Cornwall Hours: Full Time, flexible Overview Come and do the kind of engineering that made you want to be an engineer! Stretch your technical skills while building human understanding. Promote sustainability and Security within the Renewable Power Industry. And, alongside world-leading scientists and technologists, shape projects that improve lives, and daily life, in the UK and far beyond. Put simply, come, and discover the impact you can make when you're equipped, encouraged and inspired to perform to your very best. List of Duties/Work Programme/Responsibilities You will be part of a small team responsible for development, procurement, commissioning and operation of high-power RF systems for the various product development projects and be responsible for:- Operation of existing high power RF systems during lab testing. Development of new RF systems within the ESAM laboratory, Schematic Layouts. Design and manufacture high power RF systems for WPT-EV field demonstrators You will work closely with other RF engineers and scientists, mechanical designers, and external contractors to continuously develop and improve these high-power RF systems. About You Candidates must be highly motivated engineers or scientists. They should be qualified to degree level or equivalent in a relevant science or engineering subject, have experience with high power RF technologies and ideally have an interest in RF aspects of Wireless Power Transfer. Essential Skills: BEng/BSc in Electrical, Electronics, Physics or relevant science degree (S) RF experience (preferably at high power levels) Demonstrate a record of achievement in RF system design Experience of managing resources Prepared to travel both within the UK and abroad Willingness to work flexible hours and occasional shifts Desirable Skills: Demonstrate examples of relevant project work with high power RF systems which may include:- High power RF components Solid state RF amplifiers Waveguide distribution systems RF control experience Knowledge of high voltage power supply MEng in Electrical, Electronics or RF Engineering (S) PhD in Electrical, Electronics, RF Engineering or Physics (S) Chartered status (S) How To Apply Please email a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
21/03/2024
Full time
Job Title: High Power Frequency Radio Engineer - Wireless Power Transfer for Electric Vehicles (WPT-EV) Salary: £35 - £45k Benefits: 28 Days Holiday + excellent work life balance with flexible working hours. Contract Type: Permanent Location: St. Austell, Cornwall Hours: Full Time, flexible Overview Come and do the kind of engineering that made you want to be an engineer! Stretch your technical skills while building human understanding. Promote sustainability and Security within the Renewable Power Industry. And, alongside world-leading scientists and technologists, shape projects that improve lives, and daily life, in the UK and far beyond. Put simply, come, and discover the impact you can make when you're equipped, encouraged and inspired to perform to your very best. List of Duties/Work Programme/Responsibilities You will be part of a small team responsible for development, procurement, commissioning and operation of high-power RF systems for the various product development projects and be responsible for:- Operation of existing high power RF systems during lab testing. Development of new RF systems within the ESAM laboratory, Schematic Layouts. Design and manufacture high power RF systems for WPT-EV field demonstrators You will work closely with other RF engineers and scientists, mechanical designers, and external contractors to continuously develop and improve these high-power RF systems. About You Candidates must be highly motivated engineers or scientists. They should be qualified to degree level or equivalent in a relevant science or engineering subject, have experience with high power RF technologies and ideally have an interest in RF aspects of Wireless Power Transfer. Essential Skills: BEng/BSc in Electrical, Electronics, Physics or relevant science degree (S) RF experience (preferably at high power levels) Demonstrate a record of achievement in RF system design Experience of managing resources Prepared to travel both within the UK and abroad Willingness to work flexible hours and occasional shifts Desirable Skills: Demonstrate examples of relevant project work with high power RF systems which may include:- High power RF components Solid state RF amplifiers Waveguide distribution systems RF control experience Knowledge of high voltage power supply MEng in Electrical, Electronics or RF Engineering (S) PhD in Electrical, Electronics, RF Engineering or Physics (S) Chartered status (S) How To Apply Please email a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
People Source Consulting Ltd
St. Austell, Cornwall
Job Title: Graduate RF design Engineer Salary: £25,000 to £28,000 per annum Location: St. Austell, Cornwall Exciting opportunity for a fresh or early stage Graduate Radio Frequency Engineer to join our company, initially working on an Innovate UK funded project, to build a commercial demonstrator of a wireless power transfer system using novel electronics and physical principles. We will be creating something completely new and of great benefit to the environment! Working on novel technologies in magnetic resonance, the successful candidate will be able to interact with academic leaders in the technology, working to realise a commercial demonstrator of a proven conceptual design in renewable energy systems. The Renewable Energy sector is an exciting place to be at the moment with many innovations led by climate change and maintaining energy security for the world whilst minimising the impact on the environment by reducing the fossil fuel used in energy generation. Increasing the supply of clean energy is something that the world desperately needs and this project will have a positive impact on the climate. This innovation will work by transmitting high levels of electrical power across a gap that is wider than currently possible. The successful applicant will be tasked with building the power electronics to an existing design that produces W at VHF/UHF. Building the magnetic resonator unit to a novel, patented design that is quite extraordinary in its performance. Over the product development phase, the project will start from a simple test-bed design, to get the basics right, learning vital lessons, and then move through stages of increasing sophistication towards a final prototype that will be used in real-world applications! The skills of particular benefit would be: Mathematical ability Relevant experience and/or understanding of building power electronics Experience of CAD and computer simulation - particularly Comsol for predictive modelling and Solidworks for mechanical design Experience and attributes: Working largely on your own, but in a busy building with other companies operating, you will need to be a self-starter who is able to operate remotely from management, but with good level of guidance and support to steer you on the right path A flare for design As a start up company, someone with a entrepreneurial spirit and a drive to move products through the phases of development to commercialisation would be great How To Apply Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
21/03/2024
Full time
Job Title: Graduate RF design Engineer Salary: £25,000 to £28,000 per annum Location: St. Austell, Cornwall Exciting opportunity for a fresh or early stage Graduate Radio Frequency Engineer to join our company, initially working on an Innovate UK funded project, to build a commercial demonstrator of a wireless power transfer system using novel electronics and physical principles. We will be creating something completely new and of great benefit to the environment! Working on novel technologies in magnetic resonance, the successful candidate will be able to interact with academic leaders in the technology, working to realise a commercial demonstrator of a proven conceptual design in renewable energy systems. The Renewable Energy sector is an exciting place to be at the moment with many innovations led by climate change and maintaining energy security for the world whilst minimising the impact on the environment by reducing the fossil fuel used in energy generation. Increasing the supply of clean energy is something that the world desperately needs and this project will have a positive impact on the climate. This innovation will work by transmitting high levels of electrical power across a gap that is wider than currently possible. The successful applicant will be tasked with building the power electronics to an existing design that produces W at VHF/UHF. Building the magnetic resonator unit to a novel, patented design that is quite extraordinary in its performance. Over the product development phase, the project will start from a simple test-bed design, to get the basics right, learning vital lessons, and then move through stages of increasing sophistication towards a final prototype that will be used in real-world applications! The skills of particular benefit would be: Mathematical ability Relevant experience and/or understanding of building power electronics Experience of CAD and computer simulation - particularly Comsol for predictive modelling and Solidworks for mechanical design Experience and attributes: Working largely on your own, but in a busy building with other companies operating, you will need to be a self-starter who is able to operate remotely from management, but with good level of guidance and support to steer you on the right path A flare for design As a start up company, someone with a entrepreneurial spirit and a drive to move products through the phases of development to commercialisation would be great How To Apply Please send a CV to (see below) People Source Consulting Ltd is acting as an Employment Agency in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.