We are looking for a summer intern working on an Engineering degree who will help with Manufacturing Engineering tasks. This is an immediate need for the summer. AGMET, LLC, is a well-established business located in Oakwood Village, Ohio. Agmet is a leading recycler of metal-bearing industrial waste by-products that are re-purposed back into industry. Learn more about us at Job Summary: We are seeking a person pursuing an Engineering degree who is looking for summer work from May to August or September. You will work in the office and at times in the plant, performing various support duties: - INPUT DATA/INFORMATION INTO LIMBLE - Help write maintenance procedures - Help write SOPs for various tasks - Develop instructions for outside contractors - Research/secure resources for rental equipment and supplies Qualifications: - Working toward a degree in Mechanical Engineering or related field - Mechanically inclined - Proficient with LIMBLE, WORD, some EXCEL - Familiarity with process engineering principles Job Type: Full-time Pay: $20.00 - $22.00 per hour Expected hours: 40 per week
24/04/2024
Full time
We are looking for a summer intern working on an Engineering degree who will help with Manufacturing Engineering tasks. This is an immediate need for the summer. AGMET, LLC, is a well-established business located in Oakwood Village, Ohio. Agmet is a leading recycler of metal-bearing industrial waste by-products that are re-purposed back into industry. Learn more about us at Job Summary: We are seeking a person pursuing an Engineering degree who is looking for summer work from May to August or September. You will work in the office and at times in the plant, performing various support duties: - INPUT DATA/INFORMATION INTO LIMBLE - Help write maintenance procedures - Help write SOPs for various tasks - Develop instructions for outside contractors - Research/secure resources for rental equipment and supplies Qualifications: - Working toward a degree in Mechanical Engineering or related field - Mechanically inclined - Proficient with LIMBLE, WORD, some EXCEL - Familiarity with process engineering principles Job Type: Full-time Pay: $20.00 - $22.00 per hour Expected hours: 40 per week
Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract We require a Robotics Engineer/Site Manager to deal with Industrial Scale Automation Sortation HardWare This is a very Data Driven role - Starting in Zaragoza but then Spanning across various EU sites (Expenses Covered) The scope would be: - Provide on-site support to Identify, analyze, optimize and resolve advanced robotics system issues. - Optimization tasks such as: parameter changes, mechanical alignments, sensor adjustments and air pressure regulation. - Partner with product development, manufacturing, and site-level reliability, maintenance, and engineering (RME) teams to maximize the performance of advanced robotics system. Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract
23/04/2024
Project-based
Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract We require a Robotics Engineer/Site Manager to deal with Industrial Scale Automation Sortation HardWare This is a very Data Driven role - Starting in Zaragoza but then Spanning across various EU sites (Expenses Covered) The scope would be: - Provide on-site support to Identify, analyze, optimize and resolve advanced robotics system issues. - Optimization tasks such as: parameter changes, mechanical alignments, sensor adjustments and air pressure regulation. - Partner with product development, manufacturing, and site-level reliability, maintenance, and engineering (RME) teams to maximize the performance of advanced robotics system. Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract
D365 Business Central Developer - Engineering sector - £60k - £75k My client are a manufacturing and engineering company who have a presence in UK and Europe with over 7 different entities encompassed under the parent group. They are looking to get all entities across to Business central and are at the start of their journey. With the UK and Irish entity on NAV 2016 and plans to move to Business central and the Swedish and Spanish moving across to Business central with go-live set for December 2024. They are looking for a BC Developer to work within the pre-existing systems team, developing end-to-end solutions and being the in-house technical specialist alongside the systems manager and group head of IT who are both strong NAV specialists. Key Responsibilities: Analyse the current system and assist with upgrading and migrating existing C/AL codebase to AL, ensuring compatibility and optimal performance. Collaborate with project team members, business analysts, and stakeholders to gather and document functional specifications and requirements for the upgrade project. Provide technical support, troubleshooting, and guidance to the project team throughout the upgrade process. Conduct unit testing, system integration testing, and assist in user acceptance testing (UAT) to ensure the quality and reliability of the upgraded system. Maintain and update system documentation, training materials, and best practices related to Business Central development. Ensure the integrity of the codebase for all Business Central Environments is upkept through Source control and diligent extension release management. Be the gatekeeper to all AL extensions across the company and ensure they are compliant with Change Management and Microsoft Upgrades. Would this role be of interest? Best Fergus
23/04/2024
Full time
D365 Business Central Developer - Engineering sector - £60k - £75k My client are a manufacturing and engineering company who have a presence in UK and Europe with over 7 different entities encompassed under the parent group. They are looking to get all entities across to Business central and are at the start of their journey. With the UK and Irish entity on NAV 2016 and plans to move to Business central and the Swedish and Spanish moving across to Business central with go-live set for December 2024. They are looking for a BC Developer to work within the pre-existing systems team, developing end-to-end solutions and being the in-house technical specialist alongside the systems manager and group head of IT who are both strong NAV specialists. Key Responsibilities: Analyse the current system and assist with upgrading and migrating existing C/AL codebase to AL, ensuring compatibility and optimal performance. Collaborate with project team members, business analysts, and stakeholders to gather and document functional specifications and requirements for the upgrade project. Provide technical support, troubleshooting, and guidance to the project team throughout the upgrade process. Conduct unit testing, system integration testing, and assist in user acceptance testing (UAT) to ensure the quality and reliability of the upgraded system. Maintain and update system documentation, training materials, and best practices related to Business Central development. Ensure the integrity of the codebase for all Business Central Environments is upkept through Source control and diligent extension release management. Be the gatekeeper to all AL extensions across the company and ensure they are compliant with Change Management and Microsoft Upgrades. Would this role be of interest? Best Fergus
Field Engineer - 2nd/3rd Line - Milton Keynes Onsite 5 days per week - £35,000 + £2,600 car allowance 2nd/3rd Line Field Engineer require for a leading client based in Milton Keynes. My client is currently seeking a Network Field Engineer to come on board to provide support for Microsoft environments across various industries, including legal, real estate, logistics, manufacturing, and more. The role involves regular fieldwork to assist ongoing client projects, with the office-to-field-based ratio varying depending on client needs. Responsibilities include managing installations, maintenance, and troubleshooting of Windows 10/11 OS on laptops and desktops. Key skills: * Previous 2nd Line experience * Experience working with Routers, Switches and wireless access points * Manage responsibilities associated with installing, maintaining, and troubleshooting Windows 10/11 OS on laptops and desktops. * Conduct administration tasks for server operating systems. * Collaborate with RDS, Citrix, and Hyper-V technologies. * Offer assistance for smartphones (Android & iOS), tablets (Android & iOS), printers, scanners, copiers, and other hardware devices. * Administer Office 365, including tasks like user account creations, Azure AD, Exchange, etc. * Oversee various Microsoft products such as Office, Teams, SharePoint, OneDrive, and MFA. Field service deliverables, * Deploying POS (Point of Sales) infrastructures in catering environments for large-scale corporate clients, offering support to the POS provider as needed. * Setting up DSL & 4G-LTE Routers, Switches, WiFi Access Points, PoE injectors, and patching communication cabinets. * Tackling issues with existing POS (Point of Sales) infrastructures. * Troubleshooting DSL & 4G-LTE Routers, Switches, WiFi Access Points, and patching communication cabinets. Conducting pre-installation site audits to collect data on demarcation points, cellular data coverage testing, communication room inspections, IT hardware installation locations, and cabling needs. * Generating detailed client reports. * Participating in project meetings via Teams. Interested? Please submit your updated CV to Lewis Rushton at Crimson for immediate consideration. Not interested? Do you know someone who might be a perfect fit for this role? Refer a friend and earn £250 worth of vouchers! Crimson is acting as an employment agency regarding this vacancy
23/04/2024
Full time
Field Engineer - 2nd/3rd Line - Milton Keynes Onsite 5 days per week - £35,000 + £2,600 car allowance 2nd/3rd Line Field Engineer require for a leading client based in Milton Keynes. My client is currently seeking a Network Field Engineer to come on board to provide support for Microsoft environments across various industries, including legal, real estate, logistics, manufacturing, and more. The role involves regular fieldwork to assist ongoing client projects, with the office-to-field-based ratio varying depending on client needs. Responsibilities include managing installations, maintenance, and troubleshooting of Windows 10/11 OS on laptops and desktops. Key skills: * Previous 2nd Line experience * Experience working with Routers, Switches and wireless access points * Manage responsibilities associated with installing, maintaining, and troubleshooting Windows 10/11 OS on laptops and desktops. * Conduct administration tasks for server operating systems. * Collaborate with RDS, Citrix, and Hyper-V technologies. * Offer assistance for smartphones (Android & iOS), tablets (Android & iOS), printers, scanners, copiers, and other hardware devices. * Administer Office 365, including tasks like user account creations, Azure AD, Exchange, etc. * Oversee various Microsoft products such as Office, Teams, SharePoint, OneDrive, and MFA. Field service deliverables, * Deploying POS (Point of Sales) infrastructures in catering environments for large-scale corporate clients, offering support to the POS provider as needed. * Setting up DSL & 4G-LTE Routers, Switches, WiFi Access Points, PoE injectors, and patching communication cabinets. * Tackling issues with existing POS (Point of Sales) infrastructures. * Troubleshooting DSL & 4G-LTE Routers, Switches, WiFi Access Points, and patching communication cabinets. Conducting pre-installation site audits to collect data on demarcation points, cellular data coverage testing, communication room inspections, IT hardware installation locations, and cabling needs. * Generating detailed client reports. * Participating in project meetings via Teams. Interested? Please submit your updated CV to Lewis Rushton at Crimson for immediate consideration. Not interested? Do you know someone who might be a perfect fit for this role? Refer a friend and earn £250 worth of vouchers! Crimson is acting as an employment agency regarding this vacancy
Sheet Metal Worker/Welder Manchester About Our Client: Our Client is a long-established (40+ years) and growing family-run business specializing in sheet metal fabrication and welding. We offer a friendly, relaxed workplace environment focused on quality craftsmanship. Job Summary: We are seeking an experienced, skilled Sheet Metal Worker/Welder to join our team as a subcontractor. In this hands-on role, you will have the opportunity to work on a diverse range of projects and tackle new challenges daily across mild steel, stainless steel, and aluminium fabrication. Key Responsibilities: Read and interpret technical drawings, specifications, and manufacturing plans Perform MIG and TIG welding of thin plate mild steel and stainless steel components Operate CNC press brakes, Laser cutters, and other metalworking equipment Fabricate precise, high-quality metal parts, enclosures, frames, and assemblies Maintain clean and safe Workstation, adhering to health and safety protocols Requirements: Time-served background as a Sheet Metal Worker with proven welding experience Extensive MIG and TIG welding skills for mild steel and stainless steel (essential) Ability to read and work from technical drawings and manufacturing plans (critical) Experience operating CNC press brakes (preferred) Aluminium welding experience (preferred) Strong attention to detail and pride in delivering quality workmanship Reliable, punctual, and committed to meeting deadlines Working Hours: Monday-Thursday 7:30 AM - 4:15 PM, Friday 7:30 AM - 1:30 PM Compensation & Benefits: Competitive hourly rate of £16 - £18/hour Annual bonus based on company performance (approx. 2 weeks' pay) Occasional paid overtime at 1.5x rate (rare requirement) Join our skilled fabrication team at Our Client! If you are an experienced Sheet Metal Worker/Welder looking for an opportunity to showcase your talents, apply now.
23/04/2024
Project-based
Sheet Metal Worker/Welder Manchester About Our Client: Our Client is a long-established (40+ years) and growing family-run business specializing in sheet metal fabrication and welding. We offer a friendly, relaxed workplace environment focused on quality craftsmanship. Job Summary: We are seeking an experienced, skilled Sheet Metal Worker/Welder to join our team as a subcontractor. In this hands-on role, you will have the opportunity to work on a diverse range of projects and tackle new challenges daily across mild steel, stainless steel, and aluminium fabrication. Key Responsibilities: Read and interpret technical drawings, specifications, and manufacturing plans Perform MIG and TIG welding of thin plate mild steel and stainless steel components Operate CNC press brakes, Laser cutters, and other metalworking equipment Fabricate precise, high-quality metal parts, enclosures, frames, and assemblies Maintain clean and safe Workstation, adhering to health and safety protocols Requirements: Time-served background as a Sheet Metal Worker with proven welding experience Extensive MIG and TIG welding skills for mild steel and stainless steel (essential) Ability to read and work from technical drawings and manufacturing plans (critical) Experience operating CNC press brakes (preferred) Aluminium welding experience (preferred) Strong attention to detail and pride in delivering quality workmanship Reliable, punctual, and committed to meeting deadlines Working Hours: Monday-Thursday 7:30 AM - 4:15 PM, Friday 7:30 AM - 1:30 PM Compensation & Benefits: Competitive hourly rate of £16 - £18/hour Annual bonus based on company performance (approx. 2 weeks' pay) Occasional paid overtime at 1.5x rate (rare requirement) Join our skilled fabrication team at Our Client! If you are an experienced Sheet Metal Worker/Welder looking for an opportunity to showcase your talents, apply now.
Job Description: Infosight Consulting is looking for Project Engineer for one of the challenging and exciting projects. Role: Project Engineer Location: Leven, Fife, UK Contract Position Infosight is looking for Project Engineer with: Support the Civils Capex Project Engineer on the ground with safe working practises, adherent to RAMS, site inductions are planned and contractors have access to site in advance of activities starting. Ensure compliance with all relevant health, safety and environmental standards, including the Construction, Design & Management Regulations. The role holder will have a construction/H&S engineering management background. Use specialist knowledge to support safe deliver capex projects, working closely with Supply Operations teams and Capex Project Engineers. Consult on induction content for CDM projects (should be led by PC) Facilitate joint safety inspections with site teams Support Project Manager(s) on preparation of key H&S documentation and plans (eg PCI, CPP, Traffic Management, H&S File, Risk Assessments, site set up plan, etc) Ensure H&S has been considered at outset of project (before approval and tender issue) to ensure safety standards and ways of working are business as usual Support site set up (should be led by Project Engineer. H&S Lead to provide input/guidance and help co-ordinate implementation) Support PEs with pre-start walkthroughs, RAMS review and engage with site control of contractors process Co-ordinate with operations on key interfaces (eg temp walkways, updates to traffic management plans, security requirements, etc.) Be an ambassador/champion for H&S excellence during the construction phase, ie correct use of PPE at all times, challenging constructively where appropriate, providing feedback to project team and operatives on H&S performance, suggest ways to improve H&S performance. Attend daily white board meetings as often as practicable (frequency should be agreed with Technical Manager/Lead PE). contractors. Carry out audits and Immediate Corrective Action walks (ICAs) and record in project folder Day to day co-ordination at project interfaces (co-ordination within project boundary is main contractor responsibility) Drive accident/incident investigations including co-ordination with Global Eng Regional H&S Manager Support PEs with input of H&S Stats Assist in the delivery of any behavioural safety initiatives and training. Identify reoccurring safety concerns and proactively resolve by engaging with Skills Must have NEBOSH General Certificate as a minimum Health & Safety Management. The main focus of role is to support the Safe management of contractors: Construction/Project/Civil Management WHAT INFOSIGHT OFFERS Excellent Pay Packages An Opportunity to work in Global locations at our Client Sites Flexi-Working arrangement ABOUT INFOSIGHT Infosight Consulting is a Business & IT consulting company, head quartered in United Kingdom, operating since 2006 globally, specializes in SAP, Oracle & Ramco Solutions. Infosight has been delivering outstanding value to its customers by addressing their Business Challenges with appropriate application & services.
23/04/2024
Project-based
Job Description: Infosight Consulting is looking for Project Engineer for one of the challenging and exciting projects. Role: Project Engineer Location: Leven, Fife, UK Contract Position Infosight is looking for Project Engineer with: Support the Civils Capex Project Engineer on the ground with safe working practises, adherent to RAMS, site inductions are planned and contractors have access to site in advance of activities starting. Ensure compliance with all relevant health, safety and environmental standards, including the Construction, Design & Management Regulations. The role holder will have a construction/H&S engineering management background. Use specialist knowledge to support safe deliver capex projects, working closely with Supply Operations teams and Capex Project Engineers. Consult on induction content for CDM projects (should be led by PC) Facilitate joint safety inspections with site teams Support Project Manager(s) on preparation of key H&S documentation and plans (eg PCI, CPP, Traffic Management, H&S File, Risk Assessments, site set up plan, etc) Ensure H&S has been considered at outset of project (before approval and tender issue) to ensure safety standards and ways of working are business as usual Support site set up (should be led by Project Engineer. H&S Lead to provide input/guidance and help co-ordinate implementation) Support PEs with pre-start walkthroughs, RAMS review and engage with site control of contractors process Co-ordinate with operations on key interfaces (eg temp walkways, updates to traffic management plans, security requirements, etc.) Be an ambassador/champion for H&S excellence during the construction phase, ie correct use of PPE at all times, challenging constructively where appropriate, providing feedback to project team and operatives on H&S performance, suggest ways to improve H&S performance. Attend daily white board meetings as often as practicable (frequency should be agreed with Technical Manager/Lead PE). contractors. Carry out audits and Immediate Corrective Action walks (ICAs) and record in project folder Day to day co-ordination at project interfaces (co-ordination within project boundary is main contractor responsibility) Drive accident/incident investigations including co-ordination with Global Eng Regional H&S Manager Support PEs with input of H&S Stats Assist in the delivery of any behavioural safety initiatives and training. Identify reoccurring safety concerns and proactively resolve by engaging with Skills Must have NEBOSH General Certificate as a minimum Health & Safety Management. The main focus of role is to support the Safe management of contractors: Construction/Project/Civil Management WHAT INFOSIGHT OFFERS Excellent Pay Packages An Opportunity to work in Global locations at our Client Sites Flexi-Working arrangement ABOUT INFOSIGHT Infosight Consulting is a Business & IT consulting company, head quartered in United Kingdom, operating since 2006 globally, specializes in SAP, Oracle & Ramco Solutions. Infosight has been delivering outstanding value to its customers by addressing their Business Challenges with appropriate application & services.
Electrical Engineer Stone, Staffordshire Up to £65,000 VIQU have partnered with a leading entity in operational technology and digital transformation. They boast a longstanding reputation for advanced system integration, with expertise in optimising efficiency and achieving impressive performance on a large scale. Their commitment to continuous innovation drives their forward-thinking approach. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. They are seeking skilled Electrical Engineers to join their Energy team, specialising in Electrical, Control & Instrumentation (E, C & I) design and implementation. The role entails designing electrical and control systems, particularly focusing on PLC based systems for thermal and hydro power generation. As the Electrical Engineer, your responsibilities include conducting site surveys, creating system designs, producing documentation, and providing support during site acceptance testing. The successful Electrical Engineer will possess expertise in control systems, field cabling systems, and control panel design, along with relevant education and proficiency in software such as Word, Autocad, and Excel. It is also desirable for the Electrical Engineer to have familiarity with specific control system platforms, site installation experience, knowledge of wiring regulations, and awareness of safety regulations. Essential Skills of the Electrical Engineer: - Experience in control systems within the energy market - Competency in field cabling systems including surveying and route identification - Competency in control panel design incorporating PLC, I/O, Comms cards, UPS's etc - Relevant education to at least degree level or HND with additional experience - Computer literacy with Word, Autocad, and Excel - Methodical approach to project interpretation and delivery - Understanding of Full Project Lifecycle - Hold a current full driving licence (UK or be able to easily convert to full UK) - Willingness to undergo a basic disclosure Scotland check. To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Electrical Engineer Stone, Staffordshire Up to £65,000
23/04/2024
Full time
Electrical Engineer Stone, Staffordshire Up to £65,000 VIQU have partnered with a leading entity in operational technology and digital transformation. They boast a longstanding reputation for advanced system integration, with expertise in optimising efficiency and achieving impressive performance on a large scale. Their commitment to continuous innovation drives their forward-thinking approach. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. They are seeking skilled Electrical Engineers to join their Energy team, specialising in Electrical, Control & Instrumentation (E, C & I) design and implementation. The role entails designing electrical and control systems, particularly focusing on PLC based systems for thermal and hydro power generation. As the Electrical Engineer, your responsibilities include conducting site surveys, creating system designs, producing documentation, and providing support during site acceptance testing. The successful Electrical Engineer will possess expertise in control systems, field cabling systems, and control panel design, along with relevant education and proficiency in software such as Word, Autocad, and Excel. It is also desirable for the Electrical Engineer to have familiarity with specific control system platforms, site installation experience, knowledge of wiring regulations, and awareness of safety regulations. Essential Skills of the Electrical Engineer: - Experience in control systems within the energy market - Competency in field cabling systems including surveying and route identification - Competency in control panel design incorporating PLC, I/O, Comms cards, UPS's etc - Relevant education to at least degree level or HND with additional experience - Computer literacy with Word, Autocad, and Excel - Methodical approach to project interpretation and delivery - Understanding of Full Project Lifecycle - Hold a current full driving licence (UK or be able to easily convert to full UK) - Willingness to undergo a basic disclosure Scotland check. To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Electrical Engineer Stone, Staffordshire Up to £65,000
Role: This position's prime responsibilities are for the development of new (to blank deposition technologies, new materials systems and new deposition products, the latter including coating challenges that blank may undertake for customers. The position improves the efficiency and throughput of the existing equipment and processes. The position is also responsible for any external Coating research collaborations that blank undertakes. Monitor global developments in thin film technology that might impact blank and to provide technical assessments of developing areas of application that might provide new business opportunities. Deliver business transformation through disruptive technology innovation. Review customer and market feedback to maximize impact of development and innovation efforts. Develop technology and innovation roadmaps that are aligned with our customers existing and emerging needs. Ensure the site has access to all sources of manufacturing and process best practice so that we gain and sustain a competitive advantage over our competitors. Assists the business development, sales, and marketing functions to maximise the competitiveness and responsiveness of our products and processes. Enable manufacturable results from development and innovation efforts. Leverage risks and opportunities- pursue and adopt new technologies and drive implementation across product lines Participate in proposal development and champion estimates and technical statements of work whilst serving as a technical spokesperson for blank Infrared. Serve as a key interface with customers and takes their needs and requirements as inputs to create high-value solutions. Implementation of optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards; recommends and implements improvements to production processes, methods, and controls; coordinates manufacturing launch for new or revised products An Engineering Degree in a STEM subject Preferred: Physics or Chemistry Proven Knowledge of Thin Film Coating Deposition Design and Control 5+ years of experience in high technology manufacturing or research labs Competent in Project Management Essential: Microsoft Office, Coating Design Software Possess strong problem-solving skills with an attention to detail Highly analytical mindset Capability to travel internationally to support customer visits SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all
23/04/2024
Full time
Role: This position's prime responsibilities are for the development of new (to blank deposition technologies, new materials systems and new deposition products, the latter including coating challenges that blank may undertake for customers. The position improves the efficiency and throughput of the existing equipment and processes. The position is also responsible for any external Coating research collaborations that blank undertakes. Monitor global developments in thin film technology that might impact blank and to provide technical assessments of developing areas of application that might provide new business opportunities. Deliver business transformation through disruptive technology innovation. Review customer and market feedback to maximize impact of development and innovation efforts. Develop technology and innovation roadmaps that are aligned with our customers existing and emerging needs. Ensure the site has access to all sources of manufacturing and process best practice so that we gain and sustain a competitive advantage over our competitors. Assists the business development, sales, and marketing functions to maximise the competitiveness and responsiveness of our products and processes. Enable manufacturable results from development and innovation efforts. Leverage risks and opportunities- pursue and adopt new technologies and drive implementation across product lines Participate in proposal development and champion estimates and technical statements of work whilst serving as a technical spokesperson for blank Infrared. Serve as a key interface with customers and takes their needs and requirements as inputs to create high-value solutions. Implementation of optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards; recommends and implements improvements to production processes, methods, and controls; coordinates manufacturing launch for new or revised products An Engineering Degree in a STEM subject Preferred: Physics or Chemistry Proven Knowledge of Thin Film Coating Deposition Design and Control 5+ years of experience in high technology manufacturing or research labs Competent in Project Management Essential: Microsoft Office, Coating Design Software Possess strong problem-solving skills with an attention to detail Highly analytical mindset Capability to travel internationally to support customer visits SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all
Mechanical Technician - up to £28 per hour Inside IR35 - 12 Months (extensions highly likely) Herefordshire - standard 37 hours - Fully Onsite Working (Free Parking).Apprenticeship and NVQ needed* One stage F2F interview with skills test - Sector: Aerospace and Defence Are you a skilled production professional seeking a challenging opportunity with a leading company in the manufacturing sector? We are currently looking for dedicated individuals to join the Operations team of Our client who is a renowned Aerospace company at the forefront of space exploration and travel. Daily tasks will include assembly and final assembly processes of aluminium composite panel manufacture. Responsibilities: * Able to insert panels with the correct type of mechanical fasteners. * Potting of inserts * Bonding of various brackets and equipment * Bonding of inserts, using various adhesives * Bonding components and sub-assemblies using adhesives to drawing specifications * Produce work to drawing specification * Ability to read and understand Detailed engineering drawings and procedures. * Awareness and adherence to all the company Health & Safety procedures * High tolerance requirements (typically better than 0.05mm in various areas). Essential: Previous experience in a Manual Handling Role Previous experience within a production/manufacturing environment with regular use of hand tools Ability to follow procedures and work instructions/manuals. Relevant experience in carbon fibre A relevant Apprenticeship or NVQ Desirable: Clean room environment experience Previous experience of laminating Aluminium Ability to read and interpret engineering drawings preferred
23/04/2024
Project-based
Mechanical Technician - up to £28 per hour Inside IR35 - 12 Months (extensions highly likely) Herefordshire - standard 37 hours - Fully Onsite Working (Free Parking).Apprenticeship and NVQ needed* One stage F2F interview with skills test - Sector: Aerospace and Defence Are you a skilled production professional seeking a challenging opportunity with a leading company in the manufacturing sector? We are currently looking for dedicated individuals to join the Operations team of Our client who is a renowned Aerospace company at the forefront of space exploration and travel. Daily tasks will include assembly and final assembly processes of aluminium composite panel manufacture. Responsibilities: * Able to insert panels with the correct type of mechanical fasteners. * Potting of inserts * Bonding of various brackets and equipment * Bonding of inserts, using various adhesives * Bonding components and sub-assemblies using adhesives to drawing specifications * Produce work to drawing specification * Ability to read and understand Detailed engineering drawings and procedures. * Awareness and adherence to all the company Health & Safety procedures * High tolerance requirements (typically better than 0.05mm in various areas). Essential: Previous experience in a Manual Handling Role Previous experience within a production/manufacturing environment with regular use of hand tools Ability to follow procedures and work instructions/manuals. Relevant experience in carbon fibre A relevant Apprenticeship or NVQ Desirable: Clean room environment experience Previous experience of laminating Aluminium Ability to read and interpret engineering drawings preferred
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
23/04/2024
Full time
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
23/04/2024
Full time
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
Our Client South West based, Our Client is a highly respected architectural metal-work and bespoke steel fabrication specialist. Working across the region, they provide high quality products and services to main contractors, developers, and private clients. Estimator A unique and exciting opportunity has arisen to join their sales and estimating team. You will have experience as an estimator having worked in the metalwork or associated construction industry trade for a minimum of 3 years. Role description: Reporting to the Sales & Estimating Director, you will be working in their busy estimating and sales office producing accurate quotations and negotiating tenders with clients. You will also be working closely with the contracts and design department at both pre-submission and post Order stage. Responsibilities include: Estimating architectural metalwork, secondary steelwork & structural steel Reading architects and engineers drawings Material takes off's and tender summaries Obtaining supplier quotations and negotiating Preparing quotations to meet deadlines Drafting detailed quotations Liaising with clients to discuss the tender submissions Sales follow ups of Quotations Attending client meetings and occasional site visits Working with other departments The right candidate will have the following: Understanding of metalwork or associated trade Background in construction industry or manufacturing Good IT skills Excellent communicator Ably to work well in a team and with good people skills Ably to work on own initiative and self-motivated Good planning and organisational skills Positive attitude to work with attention to detail Flexible approach and able to prioritise tasks You may also have experience as a QS or sales negotiating Salary Depending on experience Company Pension Scheme Free Parking
23/04/2024
Full time
Our Client South West based, Our Client is a highly respected architectural metal-work and bespoke steel fabrication specialist. Working across the region, they provide high quality products and services to main contractors, developers, and private clients. Estimator A unique and exciting opportunity has arisen to join their sales and estimating team. You will have experience as an estimator having worked in the metalwork or associated construction industry trade for a minimum of 3 years. Role description: Reporting to the Sales & Estimating Director, you will be working in their busy estimating and sales office producing accurate quotations and negotiating tenders with clients. You will also be working closely with the contracts and design department at both pre-submission and post Order stage. Responsibilities include: Estimating architectural metalwork, secondary steelwork & structural steel Reading architects and engineers drawings Material takes off's and tender summaries Obtaining supplier quotations and negotiating Preparing quotations to meet deadlines Drafting detailed quotations Liaising with clients to discuss the tender submissions Sales follow ups of Quotations Attending client meetings and occasional site visits Working with other departments The right candidate will have the following: Understanding of metalwork or associated trade Background in construction industry or manufacturing Good IT skills Excellent communicator Ably to work well in a team and with good people skills Ably to work on own initiative and self-motivated Good planning and organisational skills Positive attitude to work with attention to detail Flexible approach and able to prioritise tasks You may also have experience as a QS or sales negotiating Salary Depending on experience Company Pension Scheme Free Parking
Dublin based, Middleware Engineer, Message Queues ( IBM MQ/RabbitMQ preferred ), Linux, ITIL, CI/CD, PL/SQL. Any PCF, Groovy and Gitbucket are desirable. You will be required to be in their Dublin office 2-3 times a week for meetings etc so this will require someone local to Dublin. *MQ (IBM or Rabbit) experience is mandatory - monitoring, configuration, creating, setting up MQs.* An agile and next-generation digital accelerating company providing digital transformation and technology services are looking for a Middleware Engineer with Message Queues (MQ). They work across a variety of industries, including banking & financial services, insurance, retail, higher education, food, healthcare, and manufacturing. Responsibilities Engage in and improve the whole life cycle of services - from inception and design, through deployment, operation, and refinement. Analyse ITSM activities of the platform and provide feedback loop to development teams on operational gaps or resiliency concerns. Support services before they go live through activities such as system design consulting, capacity planning and launch reviews. Maintain services once they are live by measuring and monitoring availability, latency, and overall system health with automated alerts. Scale systems sustainably through mechanisms like automation and evolve systems by pushing for changes that improve reliability and velocity. Practice sustainable incident response and detailed post mortems. Take a holistic approach to problem solving, by connecting the dots during a production event through the various technology stack that makes up the platform, to optimize mean time to recover. Dublin based, Middleware Engineer, Message Queues (IBM MQ/RabbitMQ preferred ), Linux, ITIL, CI/CD, PL/SQL. Any PCF, Groovy and Gitbucket are desirable.
23/04/2024
Full time
Dublin based, Middleware Engineer, Message Queues ( IBM MQ/RabbitMQ preferred ), Linux, ITIL, CI/CD, PL/SQL. Any PCF, Groovy and Gitbucket are desirable. You will be required to be in their Dublin office 2-3 times a week for meetings etc so this will require someone local to Dublin. *MQ (IBM or Rabbit) experience is mandatory - monitoring, configuration, creating, setting up MQs.* An agile and next-generation digital accelerating company providing digital transformation and technology services are looking for a Middleware Engineer with Message Queues (MQ). They work across a variety of industries, including banking & financial services, insurance, retail, higher education, food, healthcare, and manufacturing. Responsibilities Engage in and improve the whole life cycle of services - from inception and design, through deployment, operation, and refinement. Analyse ITSM activities of the platform and provide feedback loop to development teams on operational gaps or resiliency concerns. Support services before they go live through activities such as system design consulting, capacity planning and launch reviews. Maintain services once they are live by measuring and monitoring availability, latency, and overall system health with automated alerts. Scale systems sustainably through mechanisms like automation and evolve systems by pushing for changes that improve reliability and velocity. Practice sustainable incident response and detailed post mortems. Take a holistic approach to problem solving, by connecting the dots during a production event through the various technology stack that makes up the platform, to optimize mean time to recover. Dublin based, Middleware Engineer, Message Queues (IBM MQ/RabbitMQ preferred ), Linux, ITIL, CI/CD, PL/SQL. Any PCF, Groovy and Gitbucket are desirable.
Facility Coordinator/Facility Manager (w/m/d) - Reguliertes Umfeld / Google Workspace / SAP/ Gebäudemanagement / Deutsch Projekt: Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir einen Facility Coordinator/Facility Manager (w/m/d) Hintergrund: Das Facility und Real Estate Management gestaltet jetzige und künftige Standorte für alle Mitarbeitenden und antizipiert dabei Trends, einerseits interner und strategischer Natur, prüft dabei aber auch externe Einflüsse. In Abstimmung mit der Unternehmensstrategie, dem Wachstum und dem Bedarf aller Funktionen am Standort, stellt das Real Estate Flächen bereit, die qualitativ hochwertig sind und gängigen Standards entsprechen. Als Facility Coordinator ist man der Ansprechpartner für die Gebäudenutzer und Handwerker. Der oder die perfekte Kandidat:in ist eine Person, die eine technische oder naturwissenschaftliche Grundausbildung oder eine abgeschlossene kaufmännische Berufslehre vorweist und zudem bereits erste Berufserfahrungen im Bereich Gebäudemanagement mitbringt. Dieser verfügt ausserdem über fliessende Deutsch und sehr gute Englischkenntnisse. Hauptaufgaben und Verantwortungsbereiche: Wahrnehmung der Gebäudeverantwortung . Eigenständige Abwicklung/Mitarbeit von Projekten im Bereich Health, Safety and Environment sowie proaktive Zusammenarbeit mit dem Kunden bei entsprechenden Projekten . Aufzeigen von Lösungen bei Kundenwünschen und Abstimmung mit Nutzern . Kommunikation u.A. von Störungen oder Instandhaltungsarbeiten und Gebäude relevanten Informationen . Mitarbeit bei der Entwicklung, Anpassung und Einführung von Standards, Prozessen und Dokumentationen . Erfassung und Pflege von CAFM relevanten Daten . Support und Koordination bei Umzügen . Vorbereiten und Erstellen von Präsentationen, Reports und Kommunikationen . Koordinationsstelle zwischen Nutzern und Dienstleistern sowohl Gebäude-intern wie auch -extern . Erteilen, Betreuen und Überwachen von Aufträgen an interne und externe Dienstleistungserbringer und Lieferanten unter Einhaltung von Kosten, Terminen und Qualität . Beratung im Bereich Einrichtung und Ergonomie Must Haves: Technische oder naturwissenschaftliche Grundausbildung oder abgeschlossene kaufmännische Berufslehre, bevorzugt mit einer höheren Zusatzausbildung im Facility Management, kaufmännischen resp. technischen Bereich . 1-3 Jahre Berufserfahrung im Bereich Gebäudemanagement, bevorzugt im Facility Management/Real Estate . Berufserfahrung im regulierten Umfeld (GxP) . Erweiterte MS Office Kenntnisse/Google Workspace/CAD-Basiskenntnisse/SAP-Basiskenntnisse/ServiceNow Kenntnisse . Fliessende Deutschkenntnisse, Englisch sehr gut . Einbringen von eigenen Ideen/vernetzt denkend/priorisierend/serviceorientiert/analytisch/lösungsorientiert/interessiert an digitalen Tools/Organisationstalent . Teamplayer Nice to have: Höhere Zusatzausbildung im Facility Management, kaufmännischen resp. technischen Bereich von Vorteil . EKAS Zertifikat . Laborerfahrung von Vorteil Referenz Nr.: 923387TP Rolle: Facility Coordinator/Facility Manager (w/m/d) Industrie: Pharma Arbeitsort: Kaiseraugst Pensum: 100% Start: 01.06.2024 Dauer: 12 Bewerbungsfrist : 28.04.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns : ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen, IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen kein zusätzlichen Gebühren.
23/04/2024
Project-based
Facility Coordinator/Facility Manager (w/m/d) - Reguliertes Umfeld / Google Workspace / SAP/ Gebäudemanagement / Deutsch Projekt: Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir einen Facility Coordinator/Facility Manager (w/m/d) Hintergrund: Das Facility und Real Estate Management gestaltet jetzige und künftige Standorte für alle Mitarbeitenden und antizipiert dabei Trends, einerseits interner und strategischer Natur, prüft dabei aber auch externe Einflüsse. In Abstimmung mit der Unternehmensstrategie, dem Wachstum und dem Bedarf aller Funktionen am Standort, stellt das Real Estate Flächen bereit, die qualitativ hochwertig sind und gängigen Standards entsprechen. Als Facility Coordinator ist man der Ansprechpartner für die Gebäudenutzer und Handwerker. Der oder die perfekte Kandidat:in ist eine Person, die eine technische oder naturwissenschaftliche Grundausbildung oder eine abgeschlossene kaufmännische Berufslehre vorweist und zudem bereits erste Berufserfahrungen im Bereich Gebäudemanagement mitbringt. Dieser verfügt ausserdem über fliessende Deutsch und sehr gute Englischkenntnisse. Hauptaufgaben und Verantwortungsbereiche: Wahrnehmung der Gebäudeverantwortung . Eigenständige Abwicklung/Mitarbeit von Projekten im Bereich Health, Safety and Environment sowie proaktive Zusammenarbeit mit dem Kunden bei entsprechenden Projekten . Aufzeigen von Lösungen bei Kundenwünschen und Abstimmung mit Nutzern . Kommunikation u.A. von Störungen oder Instandhaltungsarbeiten und Gebäude relevanten Informationen . Mitarbeit bei der Entwicklung, Anpassung und Einführung von Standards, Prozessen und Dokumentationen . Erfassung und Pflege von CAFM relevanten Daten . Support und Koordination bei Umzügen . Vorbereiten und Erstellen von Präsentationen, Reports und Kommunikationen . Koordinationsstelle zwischen Nutzern und Dienstleistern sowohl Gebäude-intern wie auch -extern . Erteilen, Betreuen und Überwachen von Aufträgen an interne und externe Dienstleistungserbringer und Lieferanten unter Einhaltung von Kosten, Terminen und Qualität . Beratung im Bereich Einrichtung und Ergonomie Must Haves: Technische oder naturwissenschaftliche Grundausbildung oder abgeschlossene kaufmännische Berufslehre, bevorzugt mit einer höheren Zusatzausbildung im Facility Management, kaufmännischen resp. technischen Bereich . 1-3 Jahre Berufserfahrung im Bereich Gebäudemanagement, bevorzugt im Facility Management/Real Estate . Berufserfahrung im regulierten Umfeld (GxP) . Erweiterte MS Office Kenntnisse/Google Workspace/CAD-Basiskenntnisse/SAP-Basiskenntnisse/ServiceNow Kenntnisse . Fliessende Deutschkenntnisse, Englisch sehr gut . Einbringen von eigenen Ideen/vernetzt denkend/priorisierend/serviceorientiert/analytisch/lösungsorientiert/interessiert an digitalen Tools/Organisationstalent . Teamplayer Nice to have: Höhere Zusatzausbildung im Facility Management, kaufmännischen resp. technischen Bereich von Vorteil . EKAS Zertifikat . Laborerfahrung von Vorteil Referenz Nr.: 923387TP Rolle: Facility Coordinator/Facility Manager (w/m/d) Industrie: Pharma Arbeitsort: Kaiseraugst Pensum: 100% Start: 01.06.2024 Dauer: 12 Bewerbungsfrist : 28.04.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns : ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen, IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen kein zusätzlichen Gebühren.
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
23/04/2024
Project-based
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
Role: This position's prime responsibilities are for the development of new (to blank deposition technologies, new materials systems and new deposition products, the latter including coating challenges that blank may undertake for customers. The position improves the efficiency and throughput of the existing equipment and processes. The position is also responsible for any external Coating research collaborations that blank undertakes. Monitor global developments in thin film technology that might impact blank and to provide technical assessments of developing areas of application that might provide new business opportunities. Deliver business transformation through disruptive technology innovation. Review customer and market feedback to maximize impact of development and innovation efforts. Develop technology and innovation roadmaps that are aligned with our customers existing and emerging needs. Ensure the site has access to all sources of manufacturing and process best practice so that we gain and sustain a competitive advantage over our competitors. Assists the business development, sales, and marketing functions to maximise the competitiveness and responsiveness of our products and processes. Enable manufacturable results from development and innovation efforts. Leverage risks and opportunities- pursue and adopt new technologies and drive implementation across product lines Participate in proposal development and champion estimates and technical statements of work whilst serving as a technical spokesperson for blank Infrared. Serve as a key interface with customers and takes their needs and requirements as inputs to create high-value solutions. Implementation of optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards; recommends and implements improvements to production processes, methods, and controls; coordinates manufacturing launch for new or revised products An Engineering Degree in a STEM subject Preferred: Physics or Chemistry Proven Knowledge of Thin Film Coating Deposition Design and Control 5+ years of experience in high technology manufacturing or research labs Competent in Project Management Essential: Microsoft Office, Coating Design Software Possess strong problem-solving skills with an attention to detail Highly analytical mindset Capability to travel internationally to support customer visits SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all
22/04/2024
Full time
Role: This position's prime responsibilities are for the development of new (to blank deposition technologies, new materials systems and new deposition products, the latter including coating challenges that blank may undertake for customers. The position improves the efficiency and throughput of the existing equipment and processes. The position is also responsible for any external Coating research collaborations that blank undertakes. Monitor global developments in thin film technology that might impact blank and to provide technical assessments of developing areas of application that might provide new business opportunities. Deliver business transformation through disruptive technology innovation. Review customer and market feedback to maximize impact of development and innovation efforts. Develop technology and innovation roadmaps that are aligned with our customers existing and emerging needs. Ensure the site has access to all sources of manufacturing and process best practice so that we gain and sustain a competitive advantage over our competitors. Assists the business development, sales, and marketing functions to maximise the competitiveness and responsiveness of our products and processes. Enable manufacturable results from development and innovation efforts. Leverage risks and opportunities- pursue and adopt new technologies and drive implementation across product lines Participate in proposal development and champion estimates and technical statements of work whilst serving as a technical spokesperson for blank Infrared. Serve as a key interface with customers and takes their needs and requirements as inputs to create high-value solutions. Implementation of optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards; recommends and implements improvements to production processes, methods, and controls; coordinates manufacturing launch for new or revised products An Engineering Degree in a STEM subject Preferred: Physics or Chemistry Proven Knowledge of Thin Film Coating Deposition Design and Control 5+ years of experience in high technology manufacturing or research labs Competent in Project Management Essential: Microsoft Office, Coating Design Software Possess strong problem-solving skills with an attention to detail Highly analytical mindset Capability to travel internationally to support customer visits SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all
A new position of 'Production Engineer' has been created for a manufacturing business in Rhyl. There is significant untapped potential for improvement in the business and they want you to help them. As a forward-thinking Production Engineer, you will play a pivotal role in leading transformational efforts in New Product Introduction (NPI), Existing Product Development (EPD), and Lean Manufacturing. Key Focus Areas Include: 1. Lean Manufacturing: Implement lean manufacturing principles and practices. Establish a lean way of working for the site. Utilise lean tools and techniques such as Six Sigma, Kaizen, 5S, Value stream mapping to achieve operational excellence. 2. New Product Introduction (NPI): Collaborate closely with R&D throughout the entire NPI process. Proactively engage with R&D early in the development cycle to address potential manufacturing challenges. Bring modern thinking to the NPI process. 3. Existing Product Development (EPD): Optimise production processes for efficiency. Explore opportunities for automation. Drive continuous improvement in product development. Qualifications: Alongside the above, it's important you have experience using CAD ideally SolidWorks to support improvements in products where necessary. Manufacturing sector experience with a diverse range of manufacturing processes. Familiarity with Lean methodologies and certifications (eg, Six Sigma, process optimisation techniques). Background in multi-process manufacturing, with a focus on product development and improvement. If the role sounds like it could be a fit, please apply with an up to date CV and we will be in touch.
22/04/2024
Full time
A new position of 'Production Engineer' has been created for a manufacturing business in Rhyl. There is significant untapped potential for improvement in the business and they want you to help them. As a forward-thinking Production Engineer, you will play a pivotal role in leading transformational efforts in New Product Introduction (NPI), Existing Product Development (EPD), and Lean Manufacturing. Key Focus Areas Include: 1. Lean Manufacturing: Implement lean manufacturing principles and practices. Establish a lean way of working for the site. Utilise lean tools and techniques such as Six Sigma, Kaizen, 5S, Value stream mapping to achieve operational excellence. 2. New Product Introduction (NPI): Collaborate closely with R&D throughout the entire NPI process. Proactively engage with R&D early in the development cycle to address potential manufacturing challenges. Bring modern thinking to the NPI process. 3. Existing Product Development (EPD): Optimise production processes for efficiency. Explore opportunities for automation. Drive continuous improvement in product development. Qualifications: Alongside the above, it's important you have experience using CAD ideally SolidWorks to support improvements in products where necessary. Manufacturing sector experience with a diverse range of manufacturing processes. Familiarity with Lean methodologies and certifications (eg, Six Sigma, process optimisation techniques). Background in multi-process manufacturing, with a focus on product development and improvement. If the role sounds like it could be a fit, please apply with an up to date CV and we will be in touch.
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
22/04/2024
Full time
Exciting Opportunity for Embedded Design Engineer Are you a talented Embedded Design Engineer looking for a challenging and rewarding permanent position? Our client, a leading technology company, is seeking a skilled professional to join their dynamic team and contribute to the design and development of world-beating products. In this role, you will play a crucial part in supporting the UK-based Embedded team through an extremely busy period, juggling both New Product Development and delivering customer-funded projects based around existing product ranges. While the primary focus will be on Datalink products, you may also be asked to support other product lines within the company. Key responsibilities include: Designing firmware/software for processors and microcontrollers using Embedded C Developing solutions using Linux Creating firmware for FPGAs using VHDL/DSP Supporting production and manufacturing teams Troubleshooting firmware, software, and system issues Testing and debugging new and existing designs Creating comprehensive documentation, including requirement specifications, test plans, user information, and API documents The ideal candidate will have a minimum of 3 years of experience in an equivalent role and possess a strong skill set in C/C++, Embedded Linux, and FPGA development. Experience with DVB-T, datalink/radio technologies, video, and broadcast is a plus. A degree in electronics, computer science, or a related subject is desirable. Our client offers a competitive salary, excellent benefits, and a supportive work environment that encourages professional growth and development. If you're a self-motivated, enthusiastic team player with strong interpersonal skills and a desire to make an impact, we'd love to hear from you. Apply now and take the first step towards an exciting new chapter in your career!
General Operator - £22.64 per hour inside ir35 + up to 29% shift uplift - Bolton - onsite working - 12 months (extension highly likely) - Sector: Aerospace & Defence Yolk recruitment is recruiting for a General Operator to work with a world leader in the aerospace and defence sector. You will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Shift Patterns: 12-hour days Monday-Thursday paid at 115% rate 12-hour days on Friday and Sunday paid at 129% rate *Night shift pattern is available as an alternative option paying 133% of normal time Responsibilities: Carry out detailed standard assembly/manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified/trained preferred. Core Skills: Experience within a manufacturing sector in areas such as: Plastic CCA Assembly/PCB Assembly Soldering/Microelectronics Desirable Skills: Previous experience within the aerospace sector
22/04/2024
Project-based
General Operator - £22.64 per hour inside ir35 + up to 29% shift uplift - Bolton - onsite working - 12 months (extension highly likely) - Sector: Aerospace & Defence Yolk recruitment is recruiting for a General Operator to work with a world leader in the aerospace and defence sector. You will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Shift Patterns: 12-hour days Monday-Thursday paid at 115% rate 12-hour days on Friday and Sunday paid at 129% rate *Night shift pattern is available as an alternative option paying 133% of normal time Responsibilities: Carry out detailed standard assembly/manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified/trained preferred. Core Skills: Experience within a manufacturing sector in areas such as: Plastic CCA Assembly/PCB Assembly Soldering/Microelectronics Desirable Skills: Previous experience within the aerospace sector
People Source Consulting Ltd
Antrim, County Antrim
Our client is a leading global IT Solutions provider who are seeking to recruit a Customer Support Engineer/Service Desk Analyst to deliver unique value by collaboratively and reactively solving customer problems, providing proactive support advice, contributing to product quality and enhancements and creating self-help assets to broadly reach more customers. You will be part of a team responsible for providing an outstanding technical support experience to our business customers. From problem identification to full resolution, you will own and manage the customer experience over the phone and Web. Your responsibilities will include the below: Responsible for the customer support experience Own, troubleshoot and solve customer technical issues, using collaboration, troubleshooting best practices and transparency within and across teams (eg swarming) Identify cases that require escalation (either technically or strategically) Create and maintain incident management requests to product group/engineering group Contribute to case deflection initiatives, automation and other digital self-help assets to improve customer/engineer experience Provide ramp activities, knowledge sharing, technical coaching and mentoring Drive technical collaboration & engagement Lead or participate in building communities with peer delivery roles; may be workload or specialty specific Nice to have but not essential Knowledge and demonstrated technical proficiency in SharePoint or Microsoft Teams. General understanding of Microsoft 365 administration principles. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
22/04/2024
Full time
Our client is a leading global IT Solutions provider who are seeking to recruit a Customer Support Engineer/Service Desk Analyst to deliver unique value by collaboratively and reactively solving customer problems, providing proactive support advice, contributing to product quality and enhancements and creating self-help assets to broadly reach more customers. You will be part of a team responsible for providing an outstanding technical support experience to our business customers. From problem identification to full resolution, you will own and manage the customer experience over the phone and Web. Your responsibilities will include the below: Responsible for the customer support experience Own, troubleshoot and solve customer technical issues, using collaboration, troubleshooting best practices and transparency within and across teams (eg swarming) Identify cases that require escalation (either technically or strategically) Create and maintain incident management requests to product group/engineering group Contribute to case deflection initiatives, automation and other digital self-help assets to improve customer/engineer experience Provide ramp activities, knowledge sharing, technical coaching and mentoring Drive technical collaboration & engagement Lead or participate in building communities with peer delivery roles; may be workload or specialty specific Nice to have but not essential Knowledge and demonstrated technical proficiency in SharePoint or Microsoft Teams. General understanding of Microsoft 365 administration principles. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.