Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed: Experience in systems design and engineering, including defining requiirements and supporting product development. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Proving Engineer to work in our team. In this role you will support the team in: Supporting the product development team on their full development lifecycle. Ensuring the final products meets customer requirements Producing and Supporting definition and and success criteria Communicating best practice to other team members. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
19/04/2024
Full time
Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed: Experience in systems design and engineering, including defining requiirements and supporting product development. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Proving Engineer to work in our team. In this role you will support the team in: Supporting the product development team on their full development lifecycle. Ensuring the final products meets customer requirements Producing and Supporting definition and and success criteria Communicating best practice to other team members. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
FIELD SERVICE ENGINEER MEDICAL IMAGING EQUIPMENT The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the West of Ireland. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. You will be required to take part in an out of hours on call rota 1 in every 6 weeks, paid at 200EUR per week. The Location This role will predominantly involve travel in and around the Cork and Kerry ares and so ideally applicants will live within 45mins of Cork. However, flexibility to travel throughout Ireland where necessary will be required. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package 40-55,000EUR per year basic salary 11EUR per day lunch allowance A choice of a company car or car allowance paid at 8,000EUR per year Minimum on call payment of 200EUR per week (1 in 6 weeks) Private pension Life assurance 33 days annual leave (including bank holidays) What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within 34mins of Cork Next steps? Click APPLY NOW for a copy of your CV to be sent to CBSbutler. CVs will be reviewed from 2nd Jan and should you be suitable a CBSbutler representative will be in touch within 3 working days.
19/04/2024
Full time
FIELD SERVICE ENGINEER MEDICAL IMAGING EQUIPMENT The Company An exciting new Service Engineering opportunity is now available within an industry leading provider of medical imaging systems. Training is provided and so this employer offers a rare opportunity for engineers with no medical experience to break into the much sought after medical field. Through organic growth along with the acquisition of other companies, you would be joining this organisation during an exciting period of expansion. The Role As a Field Service Engineer you would be part of the Service Engineering team carrying out installations, planned and reactive maintenance as well as break down repair work on a range of medical imaging systems such as MRIs, CTs, X-Rays and Ultrasounds. You would be responsible for managing customers assigned to you, hospitals, predominantly in the West of Ireland. However, as with any field based role, flexibility to travel further afield will be required on occasions should this be required by the wider team and business. You will be required to take part in an out of hours on call rota 1 in every 6 weeks, paid at 200EUR per week. The Location This role will predominantly involve travel in and around the Cork and Kerry ares and so ideally applicants will live within 45mins of Cork. However, flexibility to travel throughout Ireland where necessary will be required. Training Training is provided. This employer regularly hires engineers from non-medical industries who have transferable electro-mechanical repair and software installation/upgrade skills. Therefore, a comprehensive, "tried and tested" training plan is in place to ensure you are well supported and appropriately upskilled. The Package 40-55,000EUR per year basic salary 11EUR per day lunch allowance A choice of a company car or car allowance paid at 8,000EUR per year Minimum on call payment of 200EUR per week (1 in 6 weeks) Private pension Life assurance 33 days annual leave (including bank holidays) What experience is required to apply? Strong electro-mechanical service, fault finding and repair skills Experience with software installations or upgrades Excellent customer service and team work skills Positive attitude and willingness to learn An enjoyment of driving and flexibility to travel as part of a field based role Living within 34mins of Cork Next steps? Click APPLY NOW for a copy of your CV to be sent to CBSbutler. CVs will be reviewed from 2nd Jan and should you be suitable a CBSbutler representative will be in touch within 3 working days.
Position: Manufacturing Operations Engineer Location: Derby, UK Employment: Full-time Are you passionate about driving manufacturing excellence within a dynamic engineering environment? We are seeking a talented individual to join our team as a Manufacturing Operations Engineer. You'll play a crucial role in supporting projects related to manufactured hardware, contributing to the success of our cutting-edge initiatives in the aerospace industry. Key Responsibilities: Manage Bill of Materials: Create, update, and maintain BoMs and associated MOE tools while supporting multiple complex projects simultaneously. Technical Interface: Serve as a liaison between purchasing, design, manufacturing, and quality departments, ensuring seamless collaboration and alignment of objectives. Supplier Relationship Management: Develop and nurture supplier relationships, documenting lessons learned to enhance design for manufacturing practices. Quality Assurance: Work closely with Quality Engineering to ensure compliance with company quality procedures, addressing any non-conforming material issues promptly and effectively. Project Support: Ensure designs meet manufacturing requirements, set and execute project schedules, and provide regular status updates to stakeholders. Mentorship: Provide guidance and support to junior manufacturing engineers, fostering a collaborative and knowledge-sharing environment within the team. Qualifications & Experience: Bachelor's degree or equivalent experience in Mechanical/Manufacturing Engineering or a related technical field. Demonstrable experience in a manufacturing environment, with a strong understanding of project and manufacturing engineering principles. Proficiency in CAD software is beneficial. Excellent organizational and communication skills, both written and verbal. Ability to deliver technical presentations internally and to external stakeholders. Strong teamwork skills, capable of collaborating effectively within multidisciplinary project teams. Nice to Have: The company is also hiring for a part time Quality Engineer position. Candidates with experience in quality management systems may choose to work a dual role, spending roughly one day per week in the quality function. While this is not essential, it presents an exciting opportunity for individuals seeking additional responsibilities. Join us and embark on a journey of continuous growth and development. As an MOE, you'll have the chance to expand your expertise, take on increasing levels of responsibility, and contribute to groundbreaking advancements in aerospace technology. If this sounds like it matches your skill set, we advise you to apply directly or call Note: All candidates must be eligible to work in the UK.
19/04/2024
Full time
Position: Manufacturing Operations Engineer Location: Derby, UK Employment: Full-time Are you passionate about driving manufacturing excellence within a dynamic engineering environment? We are seeking a talented individual to join our team as a Manufacturing Operations Engineer. You'll play a crucial role in supporting projects related to manufactured hardware, contributing to the success of our cutting-edge initiatives in the aerospace industry. Key Responsibilities: Manage Bill of Materials: Create, update, and maintain BoMs and associated MOE tools while supporting multiple complex projects simultaneously. Technical Interface: Serve as a liaison between purchasing, design, manufacturing, and quality departments, ensuring seamless collaboration and alignment of objectives. Supplier Relationship Management: Develop and nurture supplier relationships, documenting lessons learned to enhance design for manufacturing practices. Quality Assurance: Work closely with Quality Engineering to ensure compliance with company quality procedures, addressing any non-conforming material issues promptly and effectively. Project Support: Ensure designs meet manufacturing requirements, set and execute project schedules, and provide regular status updates to stakeholders. Mentorship: Provide guidance and support to junior manufacturing engineers, fostering a collaborative and knowledge-sharing environment within the team. Qualifications & Experience: Bachelor's degree or equivalent experience in Mechanical/Manufacturing Engineering or a related technical field. Demonstrable experience in a manufacturing environment, with a strong understanding of project and manufacturing engineering principles. Proficiency in CAD software is beneficial. Excellent organizational and communication skills, both written and verbal. Ability to deliver technical presentations internally and to external stakeholders. Strong teamwork skills, capable of collaborating effectively within multidisciplinary project teams. Nice to Have: The company is also hiring for a part time Quality Engineer position. Candidates with experience in quality management systems may choose to work a dual role, spending roughly one day per week in the quality function. While this is not essential, it presents an exciting opportunity for individuals seeking additional responsibilities. Join us and embark on a journey of continuous growth and development. As an MOE, you'll have the chance to expand your expertise, take on increasing levels of responsibility, and contribute to groundbreaking advancements in aerospace technology. If this sounds like it matches your skill set, we advise you to apply directly or call Note: All candidates must be eligible to work in the UK.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
19/04/2024
Project-based
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
19/04/2024
Project-based
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
I am on the lookout for an experience Field Service Engineer to join my Dublin based client on a permanent basis. My client is leading the way in global security innovation and is the go-to provider for security solutions in over 120 countries so this is a really exciting opportunity for an individual looking for a long-term career opportunity in the sector. As a Field Service Engineer, you'll play a pivotal role in ensuring the seamless operation of complex X-ray and CT-based security systems at airports. From installation to maintenance and repair, you'll deliver top-notch technical support, upholding my clients commitment to service excellence. You will be: Providing on-site technical support for airport security systems. Installing, troubleshooting, repairing, and testing a variety of security equipment. Conducting maintenance, calibration, and radiation surveys. Ensuring compliance with safety protocols and regulations. My client will put you through a comprehensive training programme to get you up to speed when you start with them, but to excel in this role you will need the following: Solid field service experience in integrated systems technologies. Proficiency in maintaining electromechanical systems and High-Voltage Equipment. Strong customer skills and ability to thrive under pressure. Self-starter with a knack for independent work and adaptability to shift environments. Willingness to travel domestically and internationally, with flexible shift availability. Physically capable of lifting This role operates on a 24/7 basis and therefore you will work on a 6-week rotating shift pattern. My client is offering a generous salary of up to €50,000 PLUS a 20% shift allowance and an extensive benefits package that includes private medical insurance, so if you think this could be your next step, get in touch!
19/04/2024
Full time
I am on the lookout for an experience Field Service Engineer to join my Dublin based client on a permanent basis. My client is leading the way in global security innovation and is the go-to provider for security solutions in over 120 countries so this is a really exciting opportunity for an individual looking for a long-term career opportunity in the sector. As a Field Service Engineer, you'll play a pivotal role in ensuring the seamless operation of complex X-ray and CT-based security systems at airports. From installation to maintenance and repair, you'll deliver top-notch technical support, upholding my clients commitment to service excellence. You will be: Providing on-site technical support for airport security systems. Installing, troubleshooting, repairing, and testing a variety of security equipment. Conducting maintenance, calibration, and radiation surveys. Ensuring compliance with safety protocols and regulations. My client will put you through a comprehensive training programme to get you up to speed when you start with them, but to excel in this role you will need the following: Solid field service experience in integrated systems technologies. Proficiency in maintaining electromechanical systems and High-Voltage Equipment. Strong customer skills and ability to thrive under pressure. Self-starter with a knack for independent work and adaptability to shift environments. Willingness to travel domestically and internationally, with flexible shift availability. Physically capable of lifting This role operates on a 24/7 basis and therefore you will work on a 6-week rotating shift pattern. My client is offering a generous salary of up to €50,000 PLUS a 20% shift allowance and an extensive benefits package that includes private medical insurance, so if you think this could be your next step, get in touch!
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
18/04/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £65 per hour (Inside IR35) 12 Month - Contract Key Responsibilities (day to day duties) . Ensuring an understanding of project briefs . Experience in the Design and specification of all Mechanical Building Services systems - heating, cooling, hot and cold water systems, ventilation, controls, etc. . Knowledge of Low Pressure/High Pressure Air, Demin Water, Nitrogen, Local Exhaust Ventilation, Diesel Fuel Supply is not essential but useful. . Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, IES, Hevacomp, in-house developed tools, etc. . Preparing technical specifications using NBS . Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit - note experience of Microstation (& AECOsim) is beneficial . Attendance at meetings with clients and contractors . Site surveys, inspections and monitoring of site works . Report and technical note writing . Maintaining complete records and archives to company standards . Adherence to all quality, environmental and governance processes . Managing elements of project delivery and an understanding of budget costings . Reviewing progress, including reporting any anomalies and changes of scope to the project lead . Contribute to the technical development of junior staff Requirements Essential: . Degree qualified, or equivalent qualification, in Building Services Engineering/Mechanical Engineering or related subjects . Chartered Engineer with CIBSE or IMechE . Familiarity with the principles of building physics such as passive design solutions and fabric first approaches . Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance . Good level of computer literacy in a range of digital tools such as IES thermal modelling package, Navisworks, Hevacomp, One Click, NBS and Microsoft packages Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
17/04/2024
Project-based
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £65 per hour (Inside IR35) 12 Month - Contract Key Responsibilities (day to day duties) . Ensuring an understanding of project briefs . Experience in the Design and specification of all Mechanical Building Services systems - heating, cooling, hot and cold water systems, ventilation, controls, etc. . Knowledge of Low Pressure/High Pressure Air, Demin Water, Nitrogen, Local Exhaust Ventilation, Diesel Fuel Supply is not essential but useful. . Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, IES, Hevacomp, in-house developed tools, etc. . Preparing technical specifications using NBS . Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit - note experience of Microstation (& AECOsim) is beneficial . Attendance at meetings with clients and contractors . Site surveys, inspections and monitoring of site works . Report and technical note writing . Maintaining complete records and archives to company standards . Adherence to all quality, environmental and governance processes . Managing elements of project delivery and an understanding of budget costings . Reviewing progress, including reporting any anomalies and changes of scope to the project lead . Contribute to the technical development of junior staff Requirements Essential: . Degree qualified, or equivalent qualification, in Building Services Engineering/Mechanical Engineering or related subjects . Chartered Engineer with CIBSE or IMechE . Familiarity with the principles of building physics such as passive design solutions and fabric first approaches . Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance . Good level of computer literacy in a range of digital tools such as IES thermal modelling package, Navisworks, Hevacomp, One Click, NBS and Microsoft packages Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
16/04/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
Electro-Mechanical Engineer Position Medical Device Industry 6-9 month contract - support the electrical and test engineers - troubleshoot electrical and mechanical issues. - Understanding of electrical test systems. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
15/04/2024
Project-based
Electro-Mechanical Engineer Position Medical Device Industry 6-9 month contract - support the electrical and test engineers - troubleshoot electrical and mechanical issues. - Understanding of electrical test systems. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen + Gym onsite Experience needed: Experience in assembling mechanical components from smaller fixtures to larger and more complex systems. As well as this, it is essential the successful Mechanical Manufacturing Technician is able to complete and certify hardware builds by following detailed planning instructions and drawings. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Mechanical Manufacturing Technician to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Communicating best practice to other team members. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
15/04/2024
Full time
Position Available: Mechanical Manufacturing Technician Location: Hertfordshire (Hybrid) & Dynamic Working Hours Salary: Up to £39,000 + Paid Overtime & Company Bonus & Very Good Pension Package, Subsidised Canteen + Gym onsite Experience needed: Experience in assembling mechanical components from smaller fixtures to larger and more complex systems. As well as this, it is essential the successful Mechanical Manufacturing Technician is able to complete and certify hardware builds by following detailed planning instructions and drawings. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Mechanical Manufacturing Technician to work in our team. In this role you will support the team in: Ensuring manufacturing build times are met. Maintaining a safe working environment and a good housekeeping policy. Ensuring compliance across all stages of the manufacturing process. Communicating best practice to other team members. Maintaining product certification and approval via regular audits. Certifying products in line with product certification procedures. What we need from you: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 is essential for this role. Formal further education certificate to HNC or equivalent certificate is a plus. Ideally have manual handling training but not essential, training can be provided. Ideally training (Including overhead cranes) but not essential, training can be provided. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Mechanical Engineering Quality inspector Location: Drayton, Abingdon, Oxfordshire OX14 4EZ Hours: 37hr week, Mon-Thurs 8.00 4.30 Fri 8.00-1.00 Overtime often available Wage: Dependant on skill and experience to £38k Salary Duration : Permanent Job description: We are looking for an experienced, dynamic and qualified In-process Inspector to take control of all aspects of quality control from material supply through thorough checking off in-process inspection, to final delivery along with a disciplined and hands on approach to dimensional inspection. The role will involve customer and supplier liaison, management of NCR s & development of corrective/preventative actions in line with ISO 9001 standards and recommended actions for development and improvement of our systems and procedures. The key responsibilities include: In-Process inspection (During Manufacture) Use of Programmable and Manual CMM inspection Upkeep, Maintenance and calibration of Metrology gauges and equipment to ISO 9001 Overseeing goods in/out inspection Raising and investigating NCRs with implementation of corrective/preventive measures Presentation of KPI statistics for monthly review Maintenance of ISO 9001 accreditation as it relates to the Production and inspection Key skills and experience: Ideally you will be an experienced CNC Machinist/programmer with an Inspection background. You will be able to demonstrate and pass on your skills and experience of quality inspection. You will be fully familiar with, and have experience of working within an ISO 9001 environment. You will be able to work well in a team environment and have the necessary people skills to develop and improve the quality culture of the business, having confidence and a discerning judgment on when to raise issues, improvements. You will have good communication skills both internally and to outside agencies by telephone/email etc Reporting to the Managing Director you will be supporting the production team striving for 100% quality. Please apply to: Sheena Arnold Machining Technology Milton Road, Drayton OX144EZ Tel: ext 204 Email: Web:
09/04/2024
Full time
Mechanical Engineering Quality inspector Location: Drayton, Abingdon, Oxfordshire OX14 4EZ Hours: 37hr week, Mon-Thurs 8.00 4.30 Fri 8.00-1.00 Overtime often available Wage: Dependant on skill and experience to £38k Salary Duration : Permanent Job description: We are looking for an experienced, dynamic and qualified In-process Inspector to take control of all aspects of quality control from material supply through thorough checking off in-process inspection, to final delivery along with a disciplined and hands on approach to dimensional inspection. The role will involve customer and supplier liaison, management of NCR s & development of corrective/preventative actions in line with ISO 9001 standards and recommended actions for development and improvement of our systems and procedures. The key responsibilities include: In-Process inspection (During Manufacture) Use of Programmable and Manual CMM inspection Upkeep, Maintenance and calibration of Metrology gauges and equipment to ISO 9001 Overseeing goods in/out inspection Raising and investigating NCRs with implementation of corrective/preventive measures Presentation of KPI statistics for monthly review Maintenance of ISO 9001 accreditation as it relates to the Production and inspection Key skills and experience: Ideally you will be an experienced CNC Machinist/programmer with an Inspection background. You will be able to demonstrate and pass on your skills and experience of quality inspection. You will be fully familiar with, and have experience of working within an ISO 9001 environment. You will be able to work well in a team environment and have the necessary people skills to develop and improve the quality culture of the business, having confidence and a discerning judgment on when to raise issues, improvements. You will have good communication skills both internally and to outside agencies by telephone/email etc Reporting to the Managing Director you will be supporting the production team striving for 100% quality. Please apply to: Sheena Arnold Machining Technology Milton Road, Drayton OX144EZ Tel: ext 204 Email: Web: