Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
18/04/2024
Project-based
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
18/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Electrical Engineer (German Speaking). The role is a permanent position based in Bern Canton & comes with some home office flexibility. Your Role: Manage & support a team of six manufacturing technology specialists. Hold responsibility for the entire life cycle of high-voltage generators, including their development, production & adaptation to new requirements. Partake in the continuous improvement of manufacturing processes to ensure high quality & efficiency. Act as a point of contact for component management & finding solutions to problems with components & deliveries. Your Skills & Experience: At least 3 years of professional experience in Electrical Engineering within Industrial Environments. Skilled & experienced in Managing Projects. Ideally experienced in Leading Team (or very motivated to gain experience). Your Profile: Completed University Degree as an Electrical Engineer or similar & Training as an Electronics Technician, Automation Technician or Similar. Open, transparent & able to inspire others & work effectively within international environments. Fluent in English & German language skills to at least C1 Level is a mandatory requirement.
Junior Electrical Integration Engineer Location: Gaydon (WestMidlands) Full Time (40hr week) Monday - Friday Private Healthcare & Pension Akkodis, is a global leader in the engineering and R&D market that is leveraging the power of connected data to accelerate innovation and digital transformation. With a shared passion for technology and talent, 50,000 engineers and digital experts deliver deep cross-sector expertise in 30 countries across North America, EMEA and APAC. Akkodis offers broad industry experience, and strong know-how in key technology sectors such as mobility, software & technology services, robotics, testing, simulations, data security, AI & data analytics. The combined IT and engineering expertise brings a unique end-to- end solution offering, with four service lines - Consulting, Solutions, Talents and Academy - to support clients in rethinking their product development and business processes, improve productivity, minimize time to market and shape a smarter and more sustainable tomorrow. Akkodis is part of the Adecco Group. Akkodis is a commercial brand under which both AKKA and Modis entities operate. Responsibilities Reporting to the Team Leader, the successful candidate will support the development of EE systems for high-end, iconic sports cars. It will be your responsibility to guarantee the functional & technical delivery of projects within your field of expertise, delivering vehicle targets, through the following activity: Ensure both functional and platform commodities are integrated and delivered Cross functional team integration to plan and achieve programme delivery Effective reporting, identifying issues and driving a concern resolution approach Manage your functions virtual and physical design verification plan, with overall sign off responsibility Definition and understanding of network signals, ECU coding/configuration and development Checking software functions, network signal alignment and diagnostics Functional testing on labcars at vehicle level (system integration Management and resolution of test issues with suppliers Required skills With a strong technical, analytical and quality focused mind-set, you should be used to setting and delivery to targets, through clear and confident communication, including experience of supplier management. Specific requirements of these roles include: An Electrical/Electronics Engineering degree (or equivalent/related) (Masters Degree Highly Desirable) Demonstrable understanding of delivering Electrical or Electronics commodities, including quality, cost, function, weight and timing Proven record experience of networks/diagnostics/integration with specific feature/function ownership and delivery Experience of one or more of the following commodity areas: Body Electronics, Telematics, Park Assist, Antenna, Lighting, EDS, Switchgear, Cluster and Display, Infotainment, Audio, CAD Design, Networks Programme Management Support Team experience appreciated Usage of AUTOSAR stack and Vector tool-chain required. Any experience with INCA would be a plus. UK and overseas travel may be required. Adecco - AKKA is acting as an Employment Agency in relation to this vacancy.
18/04/2024
Full time
Junior Electrical Integration Engineer Location: Gaydon (WestMidlands) Full Time (40hr week) Monday - Friday Private Healthcare & Pension Akkodis, is a global leader in the engineering and R&D market that is leveraging the power of connected data to accelerate innovation and digital transformation. With a shared passion for technology and talent, 50,000 engineers and digital experts deliver deep cross-sector expertise in 30 countries across North America, EMEA and APAC. Akkodis offers broad industry experience, and strong know-how in key technology sectors such as mobility, software & technology services, robotics, testing, simulations, data security, AI & data analytics. The combined IT and engineering expertise brings a unique end-to- end solution offering, with four service lines - Consulting, Solutions, Talents and Academy - to support clients in rethinking their product development and business processes, improve productivity, minimize time to market and shape a smarter and more sustainable tomorrow. Akkodis is part of the Adecco Group. Akkodis is a commercial brand under which both AKKA and Modis entities operate. Responsibilities Reporting to the Team Leader, the successful candidate will support the development of EE systems for high-end, iconic sports cars. It will be your responsibility to guarantee the functional & technical delivery of projects within your field of expertise, delivering vehicle targets, through the following activity: Ensure both functional and platform commodities are integrated and delivered Cross functional team integration to plan and achieve programme delivery Effective reporting, identifying issues and driving a concern resolution approach Manage your functions virtual and physical design verification plan, with overall sign off responsibility Definition and understanding of network signals, ECU coding/configuration and development Checking software functions, network signal alignment and diagnostics Functional testing on labcars at vehicle level (system integration Management and resolution of test issues with suppliers Required skills With a strong technical, analytical and quality focused mind-set, you should be used to setting and delivery to targets, through clear and confident communication, including experience of supplier management. Specific requirements of these roles include: An Electrical/Electronics Engineering degree (or equivalent/related) (Masters Degree Highly Desirable) Demonstrable understanding of delivering Electrical or Electronics commodities, including quality, cost, function, weight and timing Proven record experience of networks/diagnostics/integration with specific feature/function ownership and delivery Experience of one or more of the following commodity areas: Body Electronics, Telematics, Park Assist, Antenna, Lighting, EDS, Switchgear, Cluster and Display, Infotainment, Audio, CAD Design, Networks Programme Management Support Team experience appreciated Usage of AUTOSAR stack and Vector tool-chain required. Any experience with INCA would be a plus. UK and overseas travel may be required. Adecco - AKKA is acting as an Employment Agency in relation to this vacancy.
WA Consultants is currently recruiting for a contract TV Rack Systems Engineer for a client based in Bristol. The ideal candidate will have a robust background in electronic engineering or manufacturing, working electronics assemblies. You will need a keen understanding of safety standards, system design, and cable management. You will have a basic CAD capability for designing custom metal panel parts. Have solid organisational and logistic skills required to kit and build units for a range of internal and external customers. You will be comfortable with PC hardware, the Ubuntu operating system, and general system configurations, including Routers and Wi-Fi setups. Responsibilities: Disassembling TV's and Set Top Box units to mount their boards into test systems. Connecting the TV board interfaces into the rack systems to varying client requirements. Develop and construct custom rack units tailored for test automation of TV software products. Implement electrical and hardware solutions adhering to the highest safety and quality standards. Understand the CE Directive, and its implications for rack systems. Manage cable looms effectively for organised and efficient system configurations. Set up and maintain PC hardware, Routers, and WiFi networks within an Ubuntu operating system environment. Collaborate closely with the engineering team to develop, refine, and innovate system designs. Diagnose and resolve hardware, software, and system issues swiftly and efficiently. Stay updated on the latest technologies and methodologies in test automation and system design relevant to the TV software industry. Exhibit excellent customer-facing skills and the ability to represent the company professionally in client interactions. Be willing to travel across the UK for project implementations and customer support. Manage the procurement of parts and equipment, ensuring projects are completed on time and within budget. Utilise PCB and CAD design tools for necessary system modifications and enhancements. Work on site at customer locations to install, configure and maintain systems Essential skills: Degree or vocational qualifications in Electrical Engineering, Computer Science, or related fields. Demonstrated experience in electronic engineering and hardware development, ideally with TV's or monitors, perhaps working with rack units and test automation systems in the TV software sector. Knowledge of safety protocols, system design, and cable management. Comfortable with PC hardware, Ubuntu operating system, and network configurations. Exceptional troubleshooting skills across hardware, software, and system domains. Strong communication, collaboration, and problem-solving abilities, with customer-facing experience. Highly organised with proven ability to manage time effectively and handle the procurement process for parts and equipment. Willingness to travel within the UK as required for customer support and project implementation. Detail-oriented, with a passion for technology and innovation in the TV software industry. Please advise on availability and rate expectations on application. For further information, please contact Alexander Wilson. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
18/04/2024
Project-based
WA Consultants is currently recruiting for a contract TV Rack Systems Engineer for a client based in Bristol. The ideal candidate will have a robust background in electronic engineering or manufacturing, working electronics assemblies. You will need a keen understanding of safety standards, system design, and cable management. You will have a basic CAD capability for designing custom metal panel parts. Have solid organisational and logistic skills required to kit and build units for a range of internal and external customers. You will be comfortable with PC hardware, the Ubuntu operating system, and general system configurations, including Routers and Wi-Fi setups. Responsibilities: Disassembling TV's and Set Top Box units to mount their boards into test systems. Connecting the TV board interfaces into the rack systems to varying client requirements. Develop and construct custom rack units tailored for test automation of TV software products. Implement electrical and hardware solutions adhering to the highest safety and quality standards. Understand the CE Directive, and its implications for rack systems. Manage cable looms effectively for organised and efficient system configurations. Set up and maintain PC hardware, Routers, and WiFi networks within an Ubuntu operating system environment. Collaborate closely with the engineering team to develop, refine, and innovate system designs. Diagnose and resolve hardware, software, and system issues swiftly and efficiently. Stay updated on the latest technologies and methodologies in test automation and system design relevant to the TV software industry. Exhibit excellent customer-facing skills and the ability to represent the company professionally in client interactions. Be willing to travel across the UK for project implementations and customer support. Manage the procurement of parts and equipment, ensuring projects are completed on time and within budget. Utilise PCB and CAD design tools for necessary system modifications and enhancements. Work on site at customer locations to install, configure and maintain systems Essential skills: Degree or vocational qualifications in Electrical Engineering, Computer Science, or related fields. Demonstrated experience in electronic engineering and hardware development, ideally with TV's or monitors, perhaps working with rack units and test automation systems in the TV software sector. Knowledge of safety protocols, system design, and cable management. Comfortable with PC hardware, Ubuntu operating system, and network configurations. Exceptional troubleshooting skills across hardware, software, and system domains. Strong communication, collaboration, and problem-solving abilities, with customer-facing experience. Highly organised with proven ability to manage time effectively and handle the procurement process for parts and equipment. Willingness to travel within the UK as required for customer support and project implementation. Detail-oriented, with a passion for technology and innovation in the TV software industry. Please advise on availability and rate expectations on application. For further information, please contact Alexander Wilson. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Calibration Engineer Kent £35,000 - £40,000 depending on skills and experience *Due to the nature of the role & the industry you will be working in, you will be required to achieve UK SC clearance.* We are looking for a Calibration engineer to join us and take on the responsibility of ensuring Calibration activities and the maintenance of test equipment is completed to support the business. Day to Day you will - Undertake routine calibrations of electrical and mechanical test equipment Installation of ESD work-stations Understand supplier/subcontractor traceability and calibration processes Perform continuous improvement activities Support the maintenance of test equipment, located on the shop floor Key Experience we are looking for - Previous experience of fault finding, repairing and testing electronic equipment Calibration background Ability to build and maintain excellent business relationships across all levels within the business Lean manufacturing knowledge HNC/HND in Mechanical or Electrical Discipline Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
17/04/2024
Full time
Calibration Engineer Kent £35,000 - £40,000 depending on skills and experience *Due to the nature of the role & the industry you will be working in, you will be required to achieve UK SC clearance.* We are looking for a Calibration engineer to join us and take on the responsibility of ensuring Calibration activities and the maintenance of test equipment is completed to support the business. Day to Day you will - Undertake routine calibrations of electrical and mechanical test equipment Installation of ESD work-stations Understand supplier/subcontractor traceability and calibration processes Perform continuous improvement activities Support the maintenance of test equipment, located on the shop floor Key Experience we are looking for - Previous experience of fault finding, repairing and testing electronic equipment Calibration background Ability to build and maintain excellent business relationships across all levels within the business Lean manufacturing knowledge HNC/HND in Mechanical or Electrical Discipline Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Job: Security Architect Location: Reading, UK, Hybrid Job Type: Permanent Job Description We are seeking a highly skilled and experienced Security Architect to join our team who will be responsible for development of the Security Architecture that ensures the appropriate protection of all aspects of security, (people, process, electronic, data, physical) in Spring Fibre. You will be a subject matter expert and provide security guidance and recommendations to technology/business teams and contribute toSpring's security policies, standards, and guidelines related to information and Network security. This is a technical role and suitable for someone who has hands on experience in Cybersecurity. Responsibilities Help develop an Enterprise Security Architecture Framework, including patterns for identity & authentication, authorization and access control, cryptographic key and certificate management, auditing and security monitoring, data leakage prevention, privacy enhancement & protection and other standards in alignment with Enterprise Architect platforms. Establish metrics and monitoring to report the effectiveness and efficiency of the Security Architecture function. Identify, register and maintain security risks throughout their lifetimes, including agreeing treatment of risks with their owners, and reporting &escalating to Internal Audit and the CIO, when necessary. Develop, review and update security & privacy policies & standards and provide awareness guidelines, implementation and exceptions advice. Engage with owners & custodians of BAU IT systems to understand the architecture, data flow and security controls in their systems. Conduct periodic security compliance assessments and ISO 27001/2 reviews of BAU IT applications, infrastructures & ISMS. Review the security posture of potential M&A acquisition targets. Requirement Mapping long term business requirements to security architecture frameworks such as NIST, CIS etc. Experience delivering Hybrid Cloud and Internet facing applications with a strong focus on cyber security. Broad hands-on knowledge of Firewalls, intrusion detection systems, data encryption, and other industry-standard techniques and practices. Strong knowledge of IT infrastructure, IP Networking, security best practices, and automation technologies. Application security: including but not limited to: authentication, identity and access management, auditing, use of cryptography, data security, privacy enhancing technologies, web services security, OWASP, threat & vulnerability management and secure code development methodologies. Infrastructure security: including but not limited to: network security, host security, database security, device security, VPNs & SSLs, secure file transfers, security event monitoring, malware security and cyber security. Operational security: including but not limited to: incident management, change & patch management, data centre & physical security, backups, DR & BCP, outsourcing, managed services, cloud computing, asset management, cryptographic keys & certificate management, PCI DSS and DPA compliance and ISO 27001/2. Analysing network security controls, including Firewall and Router security configuration. Preferred Delivering the security review processes and frameworks, with full audit trail. Managing multiple security assessments and changing priorities, simultaneously Ensuring Security Architecture Review is built into group wide and business specific processes for acquiring and developing new technology,including developing any needed processes. Aligning business requirements to complex security architecture frameworks. Skills Required: In depth knowledge of: Firewall: Juniper/Cisco/PaloAlto. Onion Security, Splunk, Suricata, Kali. Application Security. Identity and Access Management. Data Protection. Endpoint Security. Cyber Security Operations. Experienced with Threat Modelling. Pen testing and basic incident response. Scripting languages ( python, or PowerShell/building dashboards/au-tomating common tasks) Preferred: Experience in designing systems against a zero-trust architecture. Experience with designing SOC architectures (ie SIEM, SOAR and vulnerability management solutions). Expert-level certification in either AWS or Azure, with a Security specialization. Experience in working within regulated environments, such as PCI-DSS Experience in defining secure development life cycles. Qualifications Bachelor's Degree in either Computer Science, Computer Engineering, Software Engineering, Electrical Engineering, Math, Physics. CISSP, Certified Information Systems Security Professional, International Information Systems Security Certification Consortium (ISC2) Certification, Microsoft Azure Solutions Architect, or AWS Solutions Architect.
17/04/2024
Full time
Job: Security Architect Location: Reading, UK, Hybrid Job Type: Permanent Job Description We are seeking a highly skilled and experienced Security Architect to join our team who will be responsible for development of the Security Architecture that ensures the appropriate protection of all aspects of security, (people, process, electronic, data, physical) in Spring Fibre. You will be a subject matter expert and provide security guidance and recommendations to technology/business teams and contribute toSpring's security policies, standards, and guidelines related to information and Network security. This is a technical role and suitable for someone who has hands on experience in Cybersecurity. Responsibilities Help develop an Enterprise Security Architecture Framework, including patterns for identity & authentication, authorization and access control, cryptographic key and certificate management, auditing and security monitoring, data leakage prevention, privacy enhancement & protection and other standards in alignment with Enterprise Architect platforms. Establish metrics and monitoring to report the effectiveness and efficiency of the Security Architecture function. Identify, register and maintain security risks throughout their lifetimes, including agreeing treatment of risks with their owners, and reporting &escalating to Internal Audit and the CIO, when necessary. Develop, review and update security & privacy policies & standards and provide awareness guidelines, implementation and exceptions advice. Engage with owners & custodians of BAU IT systems to understand the architecture, data flow and security controls in their systems. Conduct periodic security compliance assessments and ISO 27001/2 reviews of BAU IT applications, infrastructures & ISMS. Review the security posture of potential M&A acquisition targets. Requirement Mapping long term business requirements to security architecture frameworks such as NIST, CIS etc. Experience delivering Hybrid Cloud and Internet facing applications with a strong focus on cyber security. Broad hands-on knowledge of Firewalls, intrusion detection systems, data encryption, and other industry-standard techniques and practices. Strong knowledge of IT infrastructure, IP Networking, security best practices, and automation technologies. Application security: including but not limited to: authentication, identity and access management, auditing, use of cryptography, data security, privacy enhancing technologies, web services security, OWASP, threat & vulnerability management and secure code development methodologies. Infrastructure security: including but not limited to: network security, host security, database security, device security, VPNs & SSLs, secure file transfers, security event monitoring, malware security and cyber security. Operational security: including but not limited to: incident management, change & patch management, data centre & physical security, backups, DR & BCP, outsourcing, managed services, cloud computing, asset management, cryptographic keys & certificate management, PCI DSS and DPA compliance and ISO 27001/2. Analysing network security controls, including Firewall and Router security configuration. Preferred Delivering the security review processes and frameworks, with full audit trail. Managing multiple security assessments and changing priorities, simultaneously Ensuring Security Architecture Review is built into group wide and business specific processes for acquiring and developing new technology,including developing any needed processes. Aligning business requirements to complex security architecture frameworks. Skills Required: In depth knowledge of: Firewall: Juniper/Cisco/PaloAlto. Onion Security, Splunk, Suricata, Kali. Application Security. Identity and Access Management. Data Protection. Endpoint Security. Cyber Security Operations. Experienced with Threat Modelling. Pen testing and basic incident response. Scripting languages ( python, or PowerShell/building dashboards/au-tomating common tasks) Preferred: Experience in designing systems against a zero-trust architecture. Experience with designing SOC architectures (ie SIEM, SOAR and vulnerability management solutions). Expert-level certification in either AWS or Azure, with a Security specialization. Experience in working within regulated environments, such as PCI-DSS Experience in defining secure development life cycles. Qualifications Bachelor's Degree in either Computer Science, Computer Engineering, Software Engineering, Electrical Engineering, Math, Physics. CISSP, Certified Information Systems Security Professional, International Information Systems Security Certification Consortium (ISC2) Certification, Microsoft Azure Solutions Architect, or AWS Solutions Architect.
Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum + Car allowance VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
16/04/2024
Full time
Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum + Car allowance VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
16/04/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
Are you an apprentice graduate in electrical engineering or systems engineering, or perhaps an ex-Navy Weapons Engineer looking to transition your skills into a dynamic civilian role? Look no further! We have the perfect opportunity for you to propel your career in the direction of electrical and systems design. About our client: Join a forward-thinking company that values expertise and innovation. Defence experience isn't essential - your skills and potential are what matter most to us. Location: Portsmouth Role Overview: As a Systems Electrical Integration Specialist, you'll be at the forefront of cutting-edge projects, focusing on the integration of Commercial Off-The-Shelf (COTS) and MOD systems. Your responsibilities will span a range of OEM Systems, including Medium Calibre Guns, Sensors (Fire Control & Surveillance), Radar, Electronic Warfare Systems, and Combat Management Systems (CMS). What We're Looking For: Candidates emerging from an apprenticeship (HNC level) in electrical or systems engineering, or ex-Navy Weapons Engineers. Passion for electrical and systems design. Strong understanding of Electrical Systems/Engineering theory. Willingness to learn and adapt - while prior design experience isn't necessary, a desire to grow and develop within the role is essential. Key Responsibilities: Production of Installation Solution Packs, encompassing Electrical/System Drawings, Penetrations, Cable Data Sheets, Bill of Materials, and associated Installation Instructions. Collaborate with multidisciplinary teams to ensure seamless integration of systems. Drive innovation and efficiency in system integration processes. What our client offers: Comprehensive training on tools such as AutoCAD, SolidWorks, Foran, and more. Opportunities for professional growth and development. A supportive and collaborative work environment where your ideas are valued. Competitive compensation package with excellent benefits. Ready to Take the Next Step? If you're ready to embark on an exciting journey in systems electrical integration and contribute to ground-breaking projects, we want to hear from you! Please be advised this position will require the successful candidate to undergo SC Security Clearance. Apply now and unleash your potential with us.
16/04/2024
Full time
Are you an apprentice graduate in electrical engineering or systems engineering, or perhaps an ex-Navy Weapons Engineer looking to transition your skills into a dynamic civilian role? Look no further! We have the perfect opportunity for you to propel your career in the direction of electrical and systems design. About our client: Join a forward-thinking company that values expertise and innovation. Defence experience isn't essential - your skills and potential are what matter most to us. Location: Portsmouth Role Overview: As a Systems Electrical Integration Specialist, you'll be at the forefront of cutting-edge projects, focusing on the integration of Commercial Off-The-Shelf (COTS) and MOD systems. Your responsibilities will span a range of OEM Systems, including Medium Calibre Guns, Sensors (Fire Control & Surveillance), Radar, Electronic Warfare Systems, and Combat Management Systems (CMS). What We're Looking For: Candidates emerging from an apprenticeship (HNC level) in electrical or systems engineering, or ex-Navy Weapons Engineers. Passion for electrical and systems design. Strong understanding of Electrical Systems/Engineering theory. Willingness to learn and adapt - while prior design experience isn't necessary, a desire to grow and develop within the role is essential. Key Responsibilities: Production of Installation Solution Packs, encompassing Electrical/System Drawings, Penetrations, Cable Data Sheets, Bill of Materials, and associated Installation Instructions. Collaborate with multidisciplinary teams to ensure seamless integration of systems. Drive innovation and efficiency in system integration processes. What our client offers: Comprehensive training on tools such as AutoCAD, SolidWorks, Foran, and more. Opportunities for professional growth and development. A supportive and collaborative work environment where your ideas are valued. Competitive compensation package with excellent benefits. Ready to Take the Next Step? If you're ready to embark on an exciting journey in systems electrical integration and contribute to ground-breaking projects, we want to hear from you! Please be advised this position will require the successful candidate to undergo SC Security Clearance. Apply now and unleash your potential with us.
Job Title: Electronics Technician Location: London Start Date: 13/052024 Job Type: Contract to Perm Electronics Technician with wiring experience is required by a rapidly growing electronics company based in London. Key Responsibilities: * Wiring Harness Assembly: Build, test, and install wiring harnesses for a variety of applications, including automotive and motorsport. * Quality Assurance: Ensure all wiring harnesses meet the highest quality and safety standards across different industries. * Troubleshooting: Diagnose and resolve wiring-related issues efficiently, regardless of the application. * Collaboration: Work closely with the engineering team to interpret design specifications and provide input for improvement. * Documentation: Maintain accurate records of wiring harness assembly and testing processes. * Safety: Adhere to safety guidelines and promote a safe working environment in various industry settings. Qualifications: * Experience in wiring and wiring harness assembly, with an understanding of assembly techniques across different industries is advantageous however we are willing to train the right candidate if required. * Familiarity with electrical systems and components relevant to various industries. * Strong attention to detail and commitment to delivering high-quality work, regardless of the application. * Ability to read and interpret wiring diagrams and technical documents for different industries. * Basic soldering and crimping skills. * Excellent problem-solving abilities and troubleshooting skills adaptable to various industries. * Experience with motorsport wiring is desirable but not essential. * Strong communication and teamwork skills. * Willingness to learn and adapt in a fast-paced environment with applications spanning multiple industries. If you are interested in this opportunity, please apply now with your updated CV in Microsoft Word/PDF format. Disclaimer Notwithstanding any guidelines given to level of experience sought, we will consider candidates from outside this range if they can demonstrate the necessary competencies. Square One is acting as both an employment agency and an employment business, and is an equal opportunities recruitment business. Square One embraces diversity and will treat everyone equally. Please see our website for our full diversity statement.
15/04/2024
Job Title: Electronics Technician Location: London Start Date: 13/052024 Job Type: Contract to Perm Electronics Technician with wiring experience is required by a rapidly growing electronics company based in London. Key Responsibilities: * Wiring Harness Assembly: Build, test, and install wiring harnesses for a variety of applications, including automotive and motorsport. * Quality Assurance: Ensure all wiring harnesses meet the highest quality and safety standards across different industries. * Troubleshooting: Diagnose and resolve wiring-related issues efficiently, regardless of the application. * Collaboration: Work closely with the engineering team to interpret design specifications and provide input for improvement. * Documentation: Maintain accurate records of wiring harness assembly and testing processes. * Safety: Adhere to safety guidelines and promote a safe working environment in various industry settings. Qualifications: * Experience in wiring and wiring harness assembly, with an understanding of assembly techniques across different industries is advantageous however we are willing to train the right candidate if required. * Familiarity with electrical systems and components relevant to various industries. * Strong attention to detail and commitment to delivering high-quality work, regardless of the application. * Ability to read and interpret wiring diagrams and technical documents for different industries. * Basic soldering and crimping skills. * Excellent problem-solving abilities and troubleshooting skills adaptable to various industries. * Experience with motorsport wiring is desirable but not essential. * Strong communication and teamwork skills. * Willingness to learn and adapt in a fast-paced environment with applications spanning multiple industries. If you are interested in this opportunity, please apply now with your updated CV in Microsoft Word/PDF format. Disclaimer Notwithstanding any guidelines given to level of experience sought, we will consider candidates from outside this range if they can demonstrate the necessary competencies. Square One is acting as both an employment agency and an employment business, and is an equal opportunities recruitment business. Square One embraces diversity and will treat everyone equally. Please see our website for our full diversity statement.
Tender Engineer/Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Tender Engineer/Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
15/04/2024
Full time
Tender Engineer/Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Tender Engineer/Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
15/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
15/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
A global medical device company are looking for an Electrical Engineer to join their Engineering team on a contract basis. Your role will be to design and build test systems. The role will include wide breadth of activities within. From understanding product stand point to testing the product with the sub assembly to building an automated production system. Working knowledge of piezos is essential. Essential skills: Broad understanding of electrical or electronic systems Understanding of components and sensors Working knowledge piezos Adaptability Desirable skills: Medical device or other regulated industry experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
15/04/2024
Project-based
A global medical device company are looking for an Electrical Engineer to join their Engineering team on a contract basis. Your role will be to design and build test systems. The role will include wide breadth of activities within. From understanding product stand point to testing the product with the sub assembly to building an automated production system. Working knowledge of piezos is essential. Essential skills: Broad understanding of electrical or electronic systems Understanding of components and sensors Working knowledge piezos Adaptability Desirable skills: Medical device or other regulated industry experience The start date is for ASAP. The initial contract length is for 6 months (with extension options after). The role is based in County Tipperary and will require 3 days onsite per week, the rest of the time you can work remotely. The rate is €60 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. If you are interested in the role please send me your latest CV and I will call you to discuss the further details. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!
12/04/2024
Full time
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!
Field Engineer- English Speaking location Littau,Switzerland General aim of the position - Install/integrate and maintain telecommunication and infrastructure equipments in the wireless and Wireline networks within the assigned geographical area; - Daily travel to customers' network sites to perform tasks in the areas fulfilment, assurance and preventive maintenance; - Participate in oncall service rota. Main tasks Assurance - Follow troubleshooting procedures with the support from NOC and restore network services within the defined SLA; - Use the available tools and perform measurements to isolate and fix the faults; - Replace faulty equipment parts and perform functional tests to validate the troubleshooting results; - Implement temporary solutions whenever appropriate to help faster service restoration; - Log all actions and update the current status into the trouble ticketing tools; - Follow the spare part handling processes; - Support risk assessment activities when required; - Participate in 24x7 oncall rota. Fulfilment - Implement work orders, perform equipment installation, activation, site integration and testing within the defined SLA; - Record the implementation results into the corresponding tools, fill in service reports; - Activate the services and changes in the network together with NOC and/or customer DSS; - Notify and update NOC and/or customer DSS with the status of the changes during implementation; Preventive Maintenance - Perform preventive maintenance activities within the defined SLA; - Follow the preventive maintenance guidelines; - Perform site audits; - Resolve any issues and deficiencies found on site, including the ones discovered during site visits. - Support the Field Technician for complex tasks; - Member of project teams within Field Services. Required competencies - willingness to travel on a daily basis; - solid understanding of security and safety rules and standards; - not afraid to climb on masts and towers; - Education: recognised apprenticeship in the electrical or telecom area (eg electrician, electronician, multimedia technician, ) advanced education in telecom technologies (eg. telematician) is an advantage. Please send your CVS to: (see below)
12/04/2024
Full time
Field Engineer- English Speaking location Littau,Switzerland General aim of the position - Install/integrate and maintain telecommunication and infrastructure equipments in the wireless and Wireline networks within the assigned geographical area; - Daily travel to customers' network sites to perform tasks in the areas fulfilment, assurance and preventive maintenance; - Participate in oncall service rota. Main tasks Assurance - Follow troubleshooting procedures with the support from NOC and restore network services within the defined SLA; - Use the available tools and perform measurements to isolate and fix the faults; - Replace faulty equipment parts and perform functional tests to validate the troubleshooting results; - Implement temporary solutions whenever appropriate to help faster service restoration; - Log all actions and update the current status into the trouble ticketing tools; - Follow the spare part handling processes; - Support risk assessment activities when required; - Participate in 24x7 oncall rota. Fulfilment - Implement work orders, perform equipment installation, activation, site integration and testing within the defined SLA; - Record the implementation results into the corresponding tools, fill in service reports; - Activate the services and changes in the network together with NOC and/or customer DSS; - Notify and update NOC and/or customer DSS with the status of the changes during implementation; Preventive Maintenance - Perform preventive maintenance activities within the defined SLA; - Follow the preventive maintenance guidelines; - Perform site audits; - Resolve any issues and deficiencies found on site, including the ones discovered during site visits. - Support the Field Technician for complex tasks; - Member of project teams within Field Services. Required competencies - willingness to travel on a daily basis; - solid understanding of security and safety rules and standards; - not afraid to climb on masts and towers; - Education: recognised apprenticeship in the electrical or telecom area (eg electrician, electronician, multimedia technician, ) advanced education in telecom technologies (eg. telematician) is an advantage. Please send your CVS to: (see below)
About the role We are an innovative high-tech next-generation telecommunications start-up based in the Surrey area, actively seeking exceptionally talented engineers to join our dynamic team. As part of this role, your focus will span the entire development lifecycle, from concept through to volume production. You will be engaged in every aspect of the development process to ensure successful outcomes. This role requires a strong emphasis on multi-functional collaboration and fostering a robust team spirit. We are seeking candidates with a flexible working attitude, a team player who can also demonstrating the ability to work autonomously and take responsibility in a dynamic environment. Responsibilities Design and develop RF circuits and systems for telecom products, including transceivers, amplifiers, filters, Clocks circuits and antennas. Participate in the full life cycle of telecoms Radio product development, from specification and design through implementation, testing and support. Conduct feasibility studies and perform RF simulations to optimise system performance. Coordinate design review activities to ensure that designs meet their requirements. Collaborate with cross-functional teams, including hardware, firmware and software and test engineers to ensure seamless integration of RF circuits into overall product design. Conduct testing and validation of RF designs, troubleshooting and resolving any issues that arise during the development process. Create and maintain comprehensive documentation for the RF Design, including design specifications, debug guide and user manuals. Work closely with manufacturing teams to ensure successful transfer of RF designs into production. Stay current with industry trends and emerging technologies in RF and telecom to contribute innovative ideas to product development. Develop/maintain supplier relationships. Candidate requirements Bachelor s or master s degree in Electrical and Electronic engineering or related fields. Experience with 4G and beyond technologies. Over 8 years proven Industrial experience in RF circuit design for telecom products, with a focus on wireless communication systems. Knowledge of RF front-end modules, Clocks, FPGA functionalities and architectures. Proficiency in RF simulation tools and design software (e.g., ADS, HFSS). Experience with measurement equipment such as network analysers and spectrum analysers. Familiarity with multi-layer PCB layout and design considerations for RF circuits. Familiarity with industry standards and regulations related to RF and wireless communication. Excellent problem-solving skills and the ability to work in a fast-paced, collaborative environment. Excellent verbal and written communication skills.
10/04/2024
Full time
About the role We are an innovative high-tech next-generation telecommunications start-up based in the Surrey area, actively seeking exceptionally talented engineers to join our dynamic team. As part of this role, your focus will span the entire development lifecycle, from concept through to volume production. You will be engaged in every aspect of the development process to ensure successful outcomes. This role requires a strong emphasis on multi-functional collaboration and fostering a robust team spirit. We are seeking candidates with a flexible working attitude, a team player who can also demonstrating the ability to work autonomously and take responsibility in a dynamic environment. Responsibilities Design and develop RF circuits and systems for telecom products, including transceivers, amplifiers, filters, Clocks circuits and antennas. Participate in the full life cycle of telecoms Radio product development, from specification and design through implementation, testing and support. Conduct feasibility studies and perform RF simulations to optimise system performance. Coordinate design review activities to ensure that designs meet their requirements. Collaborate with cross-functional teams, including hardware, firmware and software and test engineers to ensure seamless integration of RF circuits into overall product design. Conduct testing and validation of RF designs, troubleshooting and resolving any issues that arise during the development process. Create and maintain comprehensive documentation for the RF Design, including design specifications, debug guide and user manuals. Work closely with manufacturing teams to ensure successful transfer of RF designs into production. Stay current with industry trends and emerging technologies in RF and telecom to contribute innovative ideas to product development. Develop/maintain supplier relationships. Candidate requirements Bachelor s or master s degree in Electrical and Electronic engineering or related fields. Experience with 4G and beyond technologies. Over 8 years proven Industrial experience in RF circuit design for telecom products, with a focus on wireless communication systems. Knowledge of RF front-end modules, Clocks, FPGA functionalities and architectures. Proficiency in RF simulation tools and design software (e.g., ADS, HFSS). Experience with measurement equipment such as network analysers and spectrum analysers. Familiarity with multi-layer PCB layout and design considerations for RF circuits. Familiarity with industry standards and regulations related to RF and wireless communication. Excellent problem-solving skills and the ability to work in a fast-paced, collaborative environment. Excellent verbal and written communication skills.