Technical Manager - Hybrid We are currently working with one of our Tier 1 clients who are a market leader in their industry sector. They are looking for an experienced Technical Manager to join them on a hybrid working basis. Job Purpose The Technical Manager is responsible for the technology systems that deliver 24/7/365 services for the client's Monitoring Services Business, namely the support and maintenance of the 8x8 and 3CX telephony systems and the Sentinel and Immix alarm handling platforms, amongst a wide range of other supporting signalling and communication technologies including TCP/IP, VPN, 4G and data storage technologies including SQL. The Technical Manager manages the remote engineering team and is responsible for ensuring reactive and pro-active services requests, problems, changes and issues are dealt with within the set KPI's, providing all stakeholders with accurate and timely reports as required. The Technical Manager will ensure all staff within the remote engineering team are supported with adequate training and development to be able to perform their duties. This Technical Manager will also work with the business to drive best practice and efficiencies within the ARC, looking at how where technology can be used to drive efficiency in areas such as AI and automation. The Technical Manager will work with the Customer Services, Admin and Support Teams to ensure that non routine, large data imports and ingested into systems correctly and that reporting requirements are met. Primary Skills Management of the company telecom systems 8x8 and 3CX - maintaining high quality call routing plans and document Management of the company alarm handling systems - maintaining alarm signalling documentation Produce and maintain high quality Stand Operating Procedure (SOP) documentation. Support in post incident investigations, identifying route cause and corrective actions identifying possible equipment misconfiguration, maintenance, training issues or general failure. Understand Alarm Receiving Centre Standards including BS5979 Cat II, BS8484, BS8418, BS EN 50518, support accreditation compliance. Understand Standards including ISO27001, ISO22301 and support accreditation compliance. SIM Supplier Management- Utilisation, Overage, Tariffs, Contracts Management of SQL Data - Stored Procedures, Reporting Monitor/Manage/support Training of the remote Monitoring Engineer Support function to deliver excellent service. Ensure ARC compliance with all Monitoring Standards, Supporting with Audits Liaising with all accreditation bodies. Due to the volume of applications received for positions, it will not be possible to respond to all applications and only applicants who are considered suitable for interview will be contacted. Proactive Appointments Limited operates as an employment agency and employment business and is an equal opportunities organisation We take our obligations to protect your personal data very seriously. Any information provided to us will be processed as detailed in our Privacy Notice, a copy of which can be found on our website
28/03/2024
Full time
Technical Manager - Hybrid We are currently working with one of our Tier 1 clients who are a market leader in their industry sector. They are looking for an experienced Technical Manager to join them on a hybrid working basis. Job Purpose The Technical Manager is responsible for the technology systems that deliver 24/7/365 services for the client's Monitoring Services Business, namely the support and maintenance of the 8x8 and 3CX telephony systems and the Sentinel and Immix alarm handling platforms, amongst a wide range of other supporting signalling and communication technologies including TCP/IP, VPN, 4G and data storage technologies including SQL. The Technical Manager manages the remote engineering team and is responsible for ensuring reactive and pro-active services requests, problems, changes and issues are dealt with within the set KPI's, providing all stakeholders with accurate and timely reports as required. The Technical Manager will ensure all staff within the remote engineering team are supported with adequate training and development to be able to perform their duties. This Technical Manager will also work with the business to drive best practice and efficiencies within the ARC, looking at how where technology can be used to drive efficiency in areas such as AI and automation. The Technical Manager will work with the Customer Services, Admin and Support Teams to ensure that non routine, large data imports and ingested into systems correctly and that reporting requirements are met. Primary Skills Management of the company telecom systems 8x8 and 3CX - maintaining high quality call routing plans and document Management of the company alarm handling systems - maintaining alarm signalling documentation Produce and maintain high quality Stand Operating Procedure (SOP) documentation. Support in post incident investigations, identifying route cause and corrective actions identifying possible equipment misconfiguration, maintenance, training issues or general failure. Understand Alarm Receiving Centre Standards including BS5979 Cat II, BS8484, BS8418, BS EN 50518, support accreditation compliance. Understand Standards including ISO27001, ISO22301 and support accreditation compliance. SIM Supplier Management- Utilisation, Overage, Tariffs, Contracts Management of SQL Data - Stored Procedures, Reporting Monitor/Manage/support Training of the remote Monitoring Engineer Support function to deliver excellent service. Ensure ARC compliance with all Monitoring Standards, Supporting with Audits Liaising with all accreditation bodies. Due to the volume of applications received for positions, it will not be possible to respond to all applications and only applicants who are considered suitable for interview will be contacted. Proactive Appointments Limited operates as an employment agency and employment business and is an equal opportunities organisation We take our obligations to protect your personal data very seriously. Any information provided to us will be processed as detailed in our Privacy Notice, a copy of which can be found on our website
Position Available : Supplier Development Manager Location : Stevenage - Dynamic Working Hours Salary : Up to £50,000 Experience needed : Experience in ensuring effective supplier performance, capability and risk management, and implementing both Legacy and cutting-edge technologies. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Influencing the evolution of the company's business environment Improving internal working practices to drive efficiency and effectiveness Handling supplier performance in terms of delivery and quality Collaborating with fellow procurement professionals, with internal collaborators (internal customers, procurement colleagues, technical and quality authorities,) and with key suppliers Influence training and development programmes in Procurement and Quality knowledge What we need from you: Experience of supply chain management/Supplier Development Manager in the Aerospace, Defence or Manufacturing environments is desirable Demonstrated ability to improve Supplier Performance (Delivery and Quality) using appropriate tools and lean methodologies Handling a portfolio of suppliers on a day-to-day basis and reporting into designated project the performance and handle supply chain risks to closure Assess supply chain and suppliers' capability to meet the delivery profile for both current state vs Future state Proficient in creating/validating process flows, lead time analysis, understanding capacity bottlenecks, yield, resources, and sub-tier mapping activities to form an industrial view of supplier Hold excellent problem-solving skills and understanding of techniques such as DMAIC (Define, Measure, Analyse, Improve, Control) to develop and implement root cause analysis and improvement plans within Supply Chain Identify, Advance, and mitigate potential Supply Chain Risks and put in place associated improvement and mitigation plans Conducting analysis and providing/delivering executive summaries Additionally, you may be responsible/assist in department supply chain excellence improvements If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
28/03/2024
Full time
Position Available : Supplier Development Manager Location : Stevenage - Dynamic Working Hours Salary : Up to £50,000 Experience needed : Experience in ensuring effective supplier performance, capability and risk management, and implementing both Legacy and cutting-edge technologies. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Supplier Development Manager to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Influencing the evolution of the company's business environment Improving internal working practices to drive efficiency and effectiveness Handling supplier performance in terms of delivery and quality Collaborating with fellow procurement professionals, with internal collaborators (internal customers, procurement colleagues, technical and quality authorities,) and with key suppliers Influence training and development programmes in Procurement and Quality knowledge What we need from you: Experience of supply chain management/Supplier Development Manager in the Aerospace, Defence or Manufacturing environments is desirable Demonstrated ability to improve Supplier Performance (Delivery and Quality) using appropriate tools and lean methodologies Handling a portfolio of suppliers on a day-to-day basis and reporting into designated project the performance and handle supply chain risks to closure Assess supply chain and suppliers' capability to meet the delivery profile for both current state vs Future state Proficient in creating/validating process flows, lead time analysis, understanding capacity bottlenecks, yield, resources, and sub-tier mapping activities to form an industrial view of supplier Hold excellent problem-solving skills and understanding of techniques such as DMAIC (Define, Measure, Analyse, Improve, Control) to develop and implement root cause analysis and improvement plans within Supply Chain Identify, Advance, and mitigate potential Supply Chain Risks and put in place associated improvement and mitigation plans Conducting analysis and providing/delivering executive summaries Additionally, you may be responsible/assist in department supply chain excellence improvements If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Infrastructure Engineer - Office 365, PowerShell Our client, a specialist financial services organisation, are looking for a Infrastructure Engineer to manage and maintain the IT infrastructure estate across their own private data centre and cloud environments. Responsibilities will range from supporting business as usual operations, as-well as also working on a variety of project initiatives. Experience required: Strong 3rd Line Infrastructure background Microsoft Office 365 PowerShell Terraform experience is nice to have This is a permanent position, paying up to £55kpa with an excellent bonus, with 2 days per week in their London office. The processing and use by us of your personal data is in accordance with our Privacy Notice which can be found on our website. William Alexander Diversity & Inclusion Policy, actively promotes the principles of equality, diversity and inclusion in all its dealings with employees, workers, job applicants, clients, customers, suppliers, contractors and the public. We fully feel an inclusive work culture where people of different backgrounds are valued equally will ensure better outcomes for us all and we approach recruitment for our clients with the same perspective and qualities.
28/03/2024
Full time
Infrastructure Engineer - Office 365, PowerShell Our client, a specialist financial services organisation, are looking for a Infrastructure Engineer to manage and maintain the IT infrastructure estate across their own private data centre and cloud environments. Responsibilities will range from supporting business as usual operations, as-well as also working on a variety of project initiatives. Experience required: Strong 3rd Line Infrastructure background Microsoft Office 365 PowerShell Terraform experience is nice to have This is a permanent position, paying up to £55kpa with an excellent bonus, with 2 days per week in their London office. The processing and use by us of your personal data is in accordance with our Privacy Notice which can be found on our website. William Alexander Diversity & Inclusion Policy, actively promotes the principles of equality, diversity and inclusion in all its dealings with employees, workers, job applicants, clients, customers, suppliers, contractors and the public. We fully feel an inclusive work culture where people of different backgrounds are valued equally will ensure better outcomes for us all and we approach recruitment for our clients with the same perspective and qualities.
RF Design Engineer - £75 per hour inside ir35 - 6 months (extensions highly likely) - Hertfordshire - hybrid working (2 - 3 days onsite) - SC cleared project - Sector: Defence & Aerospace Yolk Requirement are searching for a RF Design Engineer to work with one of the world's leading aerospace and defence clients pushing the boundaries of the industry. This is an exciting opportunity to join a talented team to develop high speed circuits. This requires an engineer with broad skills in mixed-signal electronic design with an appreciation of radar systems and also good understanding of programmable devices (FPGAs/CPLDs). Responsibilities: Design and development of analogue & high-speed digital circuits which will be used in multimode aerospace applications. Perform development test and integration activities on circuits and sub-assemblies Produce and maintain test documentation associated with the hardware, including specifications, development test schedules and test result sheets. Interact with internal customers and suppliers to understand circuit design requirements, volume constraints and environmental specifications so that the final design is compliant with the overall requirements. Oversee the transition of development hardware into series production, including robustness testing and qualification testing. Perform technical investigations to provide data for problem assessment, design improvements and support development of solutions to technical issues. Core Skills: Analogue & High-speed Digital Circuit Design Must hold a current SC security clearance. Design, Simulation & Layout using Zuken FPGA/CPLD Circuit Design and Simulation using Xilinx ISE, Vivado, Libero, and others Perform design proving test and trials in laboratory Diagnose hardware problems using various methods; eg visual inspection, signal/data analysis in design Knowledge of mixed signal board techniques Appreciation of mechanical design & module packaging Familiar with design tools including Zuken, Orcad, LTSpice, and others Be able to write high quality test requirements and test reports Some experience of product life cycles from concept through to production. Desirable Skills: Radar experience with hardware implementation
28/03/2024
Project-based
RF Design Engineer - £75 per hour inside ir35 - 6 months (extensions highly likely) - Hertfordshire - hybrid working (2 - 3 days onsite) - SC cleared project - Sector: Defence & Aerospace Yolk Requirement are searching for a RF Design Engineer to work with one of the world's leading aerospace and defence clients pushing the boundaries of the industry. This is an exciting opportunity to join a talented team to develop high speed circuits. This requires an engineer with broad skills in mixed-signal electronic design with an appreciation of radar systems and also good understanding of programmable devices (FPGAs/CPLDs). Responsibilities: Design and development of analogue & high-speed digital circuits which will be used in multimode aerospace applications. Perform development test and integration activities on circuits and sub-assemblies Produce and maintain test documentation associated with the hardware, including specifications, development test schedules and test result sheets. Interact with internal customers and suppliers to understand circuit design requirements, volume constraints and environmental specifications so that the final design is compliant with the overall requirements. Oversee the transition of development hardware into series production, including robustness testing and qualification testing. Perform technical investigations to provide data for problem assessment, design improvements and support development of solutions to technical issues. Core Skills: Analogue & High-speed Digital Circuit Design Must hold a current SC security clearance. Design, Simulation & Layout using Zuken FPGA/CPLD Circuit Design and Simulation using Xilinx ISE, Vivado, Libero, and others Perform design proving test and trials in laboratory Diagnose hardware problems using various methods; eg visual inspection, signal/data analysis in design Knowledge of mixed signal board techniques Appreciation of mechanical design & module packaging Familiar with design tools including Zuken, Orcad, LTSpice, and others Be able to write high quality test requirements and test reports Some experience of product life cycles from concept through to production. Desirable Skills: Radar experience with hardware implementation
Senior Control System Architect (Scada) Woking (Hybrid working 3 days per week onsite) £75,000 Must hold current SC or be eligible for and willing to obtain SC clearance. Can you unlock the potential of power transmission as a Senior Control System Architect! In this pivotal role, you will spearhead the design and implementation of Power Transmission SCADA and Data Historian systems. Working collaboratively with a dynamic team, you'll be at the forefront of technical guidance, ensuring the delivery of high-quality solutions within optimal timeframes and costs. Key Responsibilities: Collaborate closely with stakeholders and suppliers to achieve project goals. Take ownership of producing top-notch solutions while optimizing delivery time and cost. Ensure system designs align with business requirements and adhere to Architecture Principles. Provide actionable insights and proposals to the project leadership team. Work collaboratively with Product Owners, Technical Product Owners, Delivery managers, Engineers, Test Engineers, and Customer Experience Designers. Take responsibility for delivering technical artifacts and effectively communicate project risks. Manage and guide teams while handling customer and stakeholder interactions. Key Skills/Knowledge/Experience: Extensive experience in Control Systems, particularly Electrical Control Systems (eg, GE AEMS, PowerOn Reliance, Alstom, etc.). In-depth understanding of Operations Technologies, including SCADA, RTU, Telemetry, and Substation Automation. Excellent knowledge of Data Historians such as OSI PI, GE Proficy. Proficiency in control room protocols (ICCP, C37.118, IEC 60870-5-104/101, Modbus, etc.). Strong understanding of databases (Oracle, SQL, Cosmos DB). Ability to engage with stakeholders, perform Feasibility and Analysis, and create high-level design documents. Expertise in Industrial and IT Networks protocols, VLAN, VPN, DMZ, Firewalls, Switches, Load balancers, and related standards (ISA 95). Clear understanding of Enterprise and Secure networks, with the ability to delineate system needs. Expertise in Electrical Power Systems, Substation Engineering, and Electrical Networks. Familiarity with System Operator specifics like RTU, PMU, Inertia Monitoring, and Balancing. Experience in integrating applications with different systems using Web Services (REST/SOAP API). Robust understanding of NIST/NIS-D Security Requirements and Compliance, with knowledge of IDS. Excellent communication and interpersonal skills, with the ability to work independently and collaboratively in a multi-disciplinary team. Demonstrated ability to recognize and communicate project risks and adapt to changing priorities. SC Clearance or eligibility for SC Clearance is a must. It would be advantageous if you had an understanding of Settlements, Renewable Energy, etc.
28/03/2024
Full time
Senior Control System Architect (Scada) Woking (Hybrid working 3 days per week onsite) £75,000 Must hold current SC or be eligible for and willing to obtain SC clearance. Can you unlock the potential of power transmission as a Senior Control System Architect! In this pivotal role, you will spearhead the design and implementation of Power Transmission SCADA and Data Historian systems. Working collaboratively with a dynamic team, you'll be at the forefront of technical guidance, ensuring the delivery of high-quality solutions within optimal timeframes and costs. Key Responsibilities: Collaborate closely with stakeholders and suppliers to achieve project goals. Take ownership of producing top-notch solutions while optimizing delivery time and cost. Ensure system designs align with business requirements and adhere to Architecture Principles. Provide actionable insights and proposals to the project leadership team. Work collaboratively with Product Owners, Technical Product Owners, Delivery managers, Engineers, Test Engineers, and Customer Experience Designers. Take responsibility for delivering technical artifacts and effectively communicate project risks. Manage and guide teams while handling customer and stakeholder interactions. Key Skills/Knowledge/Experience: Extensive experience in Control Systems, particularly Electrical Control Systems (eg, GE AEMS, PowerOn Reliance, Alstom, etc.). In-depth understanding of Operations Technologies, including SCADA, RTU, Telemetry, and Substation Automation. Excellent knowledge of Data Historians such as OSI PI, GE Proficy. Proficiency in control room protocols (ICCP, C37.118, IEC 60870-5-104/101, Modbus, etc.). Strong understanding of databases (Oracle, SQL, Cosmos DB). Ability to engage with stakeholders, perform Feasibility and Analysis, and create high-level design documents. Expertise in Industrial and IT Networks protocols, VLAN, VPN, DMZ, Firewalls, Switches, Load balancers, and related standards (ISA 95). Clear understanding of Enterprise and Secure networks, with the ability to delineate system needs. Expertise in Electrical Power Systems, Substation Engineering, and Electrical Networks. Familiarity with System Operator specifics like RTU, PMU, Inertia Monitoring, and Balancing. Experience in integrating applications with different systems using Web Services (REST/SOAP API). Robust understanding of NIST/NIS-D Security Requirements and Compliance, with knowledge of IDS. Excellent communication and interpersonal skills, with the ability to work independently and collaboratively in a multi-disciplinary team. Demonstrated ability to recognize and communicate project risks and adapt to changing priorities. SC Clearance or eligibility for SC Clearance is a must. It would be advantageous if you had an understanding of Settlements, Renewable Energy, etc.
Contract Fault Management Quality Engineer 16-Month Contract £286 per day Oxford I am urgently looking for Contract Fault Management Quality Engineer to join one of the UK's leading Automotive manufacturers as a key link in supplier relationship between the supplier and end client. This is for a long-term contract which allow you to join the New Product Quality team. Engage in critical areas of product development, including pre-production build events, material quality standard development, and the Faults Management Process. Responsibilities Drive quality faults reduction in new design. Coordinate the Faults Management process, ensuring robust conversion of Quality Notifications (QN) to Quality Concern Reports (QCR). Own project specific KPI reporting to ensure adherence to parameters at each project gateway. Manage Faults Management meetings and process ownership. Develop reporting metrics using PowerBi and contribute to continuous improvement initiatives. Create project quality targets and oversee the Product Audit tracker for project delivery. Support the delivery of the quality control plan for each project, ensuring holistic project planning and alignment across relevant quality functions. Requirements Comprehensive knowledge of automotive manufacturing or similar industry. Experience in New Product Development within the Automotive Industry. Proficiency in 8D or Practical Problem Solving (PPS). Understanding of engineering drawings and statistical analysis (SPC). Familiarity with FMEA and Design for Manufacture. Project management skills with the ability to lead cross-functional teams. The client is interviewing from next week with an immediate start so if you have the relevant experience, please send across your most up to date CV for review.
28/03/2024
Project-based
Contract Fault Management Quality Engineer 16-Month Contract £286 per day Oxford I am urgently looking for Contract Fault Management Quality Engineer to join one of the UK's leading Automotive manufacturers as a key link in supplier relationship between the supplier and end client. This is for a long-term contract which allow you to join the New Product Quality team. Engage in critical areas of product development, including pre-production build events, material quality standard development, and the Faults Management Process. Responsibilities Drive quality faults reduction in new design. Coordinate the Faults Management process, ensuring robust conversion of Quality Notifications (QN) to Quality Concern Reports (QCR). Own project specific KPI reporting to ensure adherence to parameters at each project gateway. Manage Faults Management meetings and process ownership. Develop reporting metrics using PowerBi and contribute to continuous improvement initiatives. Create project quality targets and oversee the Product Audit tracker for project delivery. Support the delivery of the quality control plan for each project, ensuring holistic project planning and alignment across relevant quality functions. Requirements Comprehensive knowledge of automotive manufacturing or similar industry. Experience in New Product Development within the Automotive Industry. Proficiency in 8D or Practical Problem Solving (PPS). Understanding of engineering drawings and statistical analysis (SPC). Familiarity with FMEA and Design for Manufacture. Project management skills with the ability to lead cross-functional teams. The client is interviewing from next week with an immediate start so if you have the relevant experience, please send across your most up to date CV for review.
Opex Improvement Consultant Max Supplier Charge Rate: Market Rate Clearance required: BPSS Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset/possibility to work 1 day a week from home IR35 Status: Mandated PAYE only We are heading up a recruitment drive on behalf of a leading IT consultancy that require a Opex Improvement Consultant to join their team on a major nuclear project that is based at Hinckley Point. Job Description: Main Responsibilities: You will contribute to the improvement of all the OPEX Quality activities on site for the project with respect to the Management System in force Lead the continuous improvement process and help in the proper application of OPEX tools (visual management including 5S approach, field routines, deployment of work standards, A3 or 8D problem solving methods, suggestion system, etc.) Contribute to the definition of the objectives of the site's annual performance plan (simplification of processes, process expertise, etc.) and supervise their implementation Lead, energize, facilitate the conduct of continuous improvement projects and ensure progress reporting Disseminate and ensure the use of the Framatome group's standard formats Ensure the follow-up of the site's masterplan (prioritized action plan) Provide expertise and training to managers in the areas of problem solving Provide support to all employees in the use of Excellence, human reliability or project management tools. Key Skills and experiences: You have an engineer degree with ideally a first experience in the field of quality and engineering. You have operational experience in an industrial environment on a production site of at least 5 years (Production, Maintenance, Methods, etc.) You have knowledge and experience in Lean You have knowledge of project management You are field-oriented and results-oriented You demonstrate an ability to convince, unite and lead change Background: Nuclear, Off-shore, Aerospace, Nuclear manufacturing Additional information No job travel, on site Full Time
27/03/2024
Project-based
Opex Improvement Consultant Max Supplier Charge Rate: Market Rate Clearance required: BPSS Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset/possibility to work 1 day a week from home IR35 Status: Mandated PAYE only We are heading up a recruitment drive on behalf of a leading IT consultancy that require a Opex Improvement Consultant to join their team on a major nuclear project that is based at Hinckley Point. Job Description: Main Responsibilities: You will contribute to the improvement of all the OPEX Quality activities on site for the project with respect to the Management System in force Lead the continuous improvement process and help in the proper application of OPEX tools (visual management including 5S approach, field routines, deployment of work standards, A3 or 8D problem solving methods, suggestion system, etc.) Contribute to the definition of the objectives of the site's annual performance plan (simplification of processes, process expertise, etc.) and supervise their implementation Lead, energize, facilitate the conduct of continuous improvement projects and ensure progress reporting Disseminate and ensure the use of the Framatome group's standard formats Ensure the follow-up of the site's masterplan (prioritized action plan) Provide expertise and training to managers in the areas of problem solving Provide support to all employees in the use of Excellence, human reliability or project management tools. Key Skills and experiences: You have an engineer degree with ideally a first experience in the field of quality and engineering. You have operational experience in an industrial environment on a production site of at least 5 years (Production, Maintenance, Methods, etc.) You have knowledge and experience in Lean You have knowledge of project management You are field-oriented and results-oriented You demonstrate an ability to convince, unite and lead change Background: Nuclear, Off-shore, Aerospace, Nuclear manufacturing Additional information No job travel, on site Full Time
Job Title: Junior Surveillance Mechanical Engineer Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset Job Description: As a mechanical surveillance engineer, you will join EIRA team in charge of the surveillance of the manufacturing and installation of nuclear equipment for worldwide power plants. It is a rewarding experience that starts with comprehensive training and tutoring, with the objective of good respect of the contractual technical requirements, the manufacturing and installation follow-up of equipment's with the highest quality and safety level. The surveillance engineer is a key player during the installation phases as an in-the-field representative. The surveillance engineer works closely with the other departments (quality, installation, project, engineering, procurement, expediting, cost) to ensure the conformity of the manufacturing or installation activities and of equipment's on factories or construction site. EIRA team also gives the opportunity to develop technical skills on a wider range of equipment's, such as pressure vessel, steam generators, pumps, valves, instrumentation, and offers worldwide opportunity of experience. is looking for a Mechanical Engineer for the surveillance of the primary loop installation activities for the Hinkley Point EPR construction site. Main Responsibilities: Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning Ensure the surveillance plan is respected Review the Follow up Documents and End of Installation reports Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures) Organize your own schedules of surveillance activities with the surveillance leader Contribute to open points treatments and closure Participate to progress meetings with installation, projects, suppliers or customers Key Skills and experiences: Min 1 year experience with technical degree qualification Manufacturing processes knowledge (welding, foundry, forge ) Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge Quality fundamentals knowledge Ability to read and understand the technical engineering documents of scheme Fluent English (spoken and written) Organisation Capability to defend and explain own observations Being critical and analytical minded to be able to identify deviations and to contribute to their resolution Autonomy to manage the surveillance on-site schedule or business trip Team working Qualifications Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. Knowledge in welding or non destructive testing - desirable. Additional information Training: several months training periods on various localisation in France and Europe. Some out of hours working will be required
27/03/2024
Project-based
Job Title: Junior Surveillance Mechanical Engineer Duration: 6 months Location: Hinkley Point C - Bridgwater, Somerset Job Description: As a mechanical surveillance engineer, you will join EIRA team in charge of the surveillance of the manufacturing and installation of nuclear equipment for worldwide power plants. It is a rewarding experience that starts with comprehensive training and tutoring, with the objective of good respect of the contractual technical requirements, the manufacturing and installation follow-up of equipment's with the highest quality and safety level. The surveillance engineer is a key player during the installation phases as an in-the-field representative. The surveillance engineer works closely with the other departments (quality, installation, project, engineering, procurement, expediting, cost) to ensure the conformity of the manufacturing or installation activities and of equipment's on factories or construction site. EIRA team also gives the opportunity to develop technical skills on a wider range of equipment's, such as pressure vessel, steam generators, pumps, valves, instrumentation, and offers worldwide opportunity of experience. is looking for a Mechanical Engineer for the surveillance of the primary loop installation activities for the Hinkley Point EPR construction site. Main Responsibilities: Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning Ensure the surveillance plan is respected Review the Follow up Documents and End of Installation reports Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures) Organize your own schedules of surveillance activities with the surveillance leader Contribute to open points treatments and closure Participate to progress meetings with installation, projects, suppliers or customers Key Skills and experiences: Min 1 year experience with technical degree qualification Manufacturing processes knowledge (welding, foundry, forge ) Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge Quality fundamentals knowledge Ability to read and understand the technical engineering documents of scheme Fluent English (spoken and written) Organisation Capability to defend and explain own observations Being critical and analytical minded to be able to identify deviations and to contribute to their resolution Autonomy to manage the surveillance on-site schedule or business trip Team working Qualifications Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. Knowledge in welding or non destructive testing - desirable. Additional information Training: several months training periods on various localisation in France and Europe. Some out of hours working will be required
We are IT Recruitment Specialists partnered with a prestigious Global Consultancy who required a Surveillance Mechanical Engineer - Location: Bridgwater, Somerset - working onsite, the balance of time will be remote for one of their public sector Clients based in the UK. IR35: This role is inside of IR35 Initial duration: 6 months Role and tasks Surveillance Mechanical Engineer Consultant Job Description: As a mechanical surveillance engineer, you will join EIRA team in charge of the surveillance of the manufacturing and installation of nuclear equipment for worldwide power plants. It is a rewarding experience that starts with comprehensive training and tutoring, with the objective of good respect of the contractual technical requirements, the manufacturing and installation follow-up of equipment's with the highest quality and safety level. The surveillance engineer is a key player during the installation phases as an in-the-field representative. The surveillance engineer works closely with the other departments (quality, installation, project, engineering, procurement, expediting, cost) to ensure the conformity of the manufacturing or installation activities and of equipment's on factories or construction site. EIRA team also gives the opportunity to develop technical skills on a wider range of equipment's, such as pressure vessel, steam generators, pumps, valves, instrumentation, and offers worldwide opportunity of experience. is looking for a Mechanical Engineer for the surveillance of the primary loop installation activities for the Hinkley Point EPR construction site. Main Responsibilities: Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning Ensure the surveillance plan is respected Review the Follow up Documents and End of Installation reports Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures ) Organize your own schedules of surveillance activities with the surveillance leader Contribute to open points treatments and closure Participate to progress meetings with installation, projects, suppliers or customers Key Skills and experiences: Min 1 year experience with technical degree qualification Manufacturing processes knowledge (welding, foundry, forge ) Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge Quality fundamentals knowledge Ability to read and understand the technical engineering documents of scheme Fluent English (spoken and written) Organisation Capability to defend and explain own observations Being critical and analytical minded to be able to identify deviations and to contribute to their resolution Autonomy to manage the surveillance on-site schedule or business trip Team working Qualifications Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. Knowledge in welding or non destructive testing - desirable. Additional information Training: several months training periods on various localisation in France and Europe. Some out of hours working will be required. If you are interested in this position and would like to learn more, please send through your CV and we will get in touch with you as soon as possible. Please note, candidates are often Shortlisted within 48 hours.
27/03/2024
Project-based
We are IT Recruitment Specialists partnered with a prestigious Global Consultancy who required a Surveillance Mechanical Engineer - Location: Bridgwater, Somerset - working onsite, the balance of time will be remote for one of their public sector Clients based in the UK. IR35: This role is inside of IR35 Initial duration: 6 months Role and tasks Surveillance Mechanical Engineer Consultant Job Description: As a mechanical surveillance engineer, you will join EIRA team in charge of the surveillance of the manufacturing and installation of nuclear equipment for worldwide power plants. It is a rewarding experience that starts with comprehensive training and tutoring, with the objective of good respect of the contractual technical requirements, the manufacturing and installation follow-up of equipment's with the highest quality and safety level. The surveillance engineer is a key player during the installation phases as an in-the-field representative. The surveillance engineer works closely with the other departments (quality, installation, project, engineering, procurement, expediting, cost) to ensure the conformity of the manufacturing or installation activities and of equipment's on factories or construction site. EIRA team also gives the opportunity to develop technical skills on a wider range of equipment's, such as pressure vessel, steam generators, pumps, valves, instrumentation, and offers worldwide opportunity of experience. is looking for a Mechanical Engineer for the surveillance of the primary loop installation activities for the Hinkley Point EPR construction site. Main Responsibilities: Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning Ensure the surveillance plan is respected Review the Follow up Documents and End of Installation reports Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures ) Organize your own schedules of surveillance activities with the surveillance leader Contribute to open points treatments and closure Participate to progress meetings with installation, projects, suppliers or customers Key Skills and experiences: Min 1 year experience with technical degree qualification Manufacturing processes knowledge (welding, foundry, forge ) Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge Quality fundamentals knowledge Ability to read and understand the technical engineering documents of scheme Fluent English (spoken and written) Organisation Capability to defend and explain own observations Being critical and analytical minded to be able to identify deviations and to contribute to their resolution Autonomy to manage the surveillance on-site schedule or business trip Team working Qualifications Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. Knowledge in welding or non destructive testing - desirable. Additional information Training: several months training periods on various localisation in France and Europe. Some out of hours working will be required. If you are interested in this position and would like to learn more, please send through your CV and we will get in touch with you as soon as possible. Please note, candidates are often Shortlisted within 48 hours.
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
26/03/2024
Full time
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
Role Title: Junior Surveillance Mechanical Engineer Duration: 6 months Location: Hinkley Point C, Bridgwater, Somerset (full time on site) Rate: £Competitive - Umbrella only As a mechanical surveillance engineer, you will join EIRA team in charge of the surveillance of the manufacturing and installation of nuclear equipment for worldwide power plants. It is a rewarding experience that starts with comprehensive training and tutoring, with the objective of good respect of the contractual technical requirements, the manufacturing and installation follow-up of equipment's with the highest quality and safety level. The surveillance engineer is a key player during the installation phases as an in-the-field representative. The surveillance engineer works closely with the other departments (quality, installation, project, engineering, procurement, expediting, cost) to ensure the conformity of the manufacturing or installation activities and of equipment's on factories or construction site. EIRA team also gives the opportunity to develop technical skills on a wider range of equipment's, such as pressure vessel, steam generators, pumps, valves, instrumentation, and offers worldwide opportunity of experience. Our client is looking for a Mechanical Engineer for the surveillance of the primary loop installation activities for the Hinkley Point EPR construction site. Role purpose/summary Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning Ensure the surveillance plan is respected Review the Follow up Documents and End of Installation reports Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures) Organize your own schedules of surveillance activities with the surveillance leader Contribute to open points treatments and closure Participate to progress meetings with installation, projects, suppliers or customers Key Skills/requirements Min 1 year experience with technical degree qualification Manufacturing processes knowledge (welding, foundry, forge) Destructive (chemical or mechanical testing) and non-destructive testing (PT, UT, RT, EC, MT) knowledge Quality fundamentals knowledge Ability to read and understand the technical engineering documents of scheme Fluent English (spoken and written) Organisation Capability to defend and explain own observations Being critical and analytical minded to be able to identify deviations and to contribute to their resolution Autonomy to manage the surveillance on-site schedule or business trip Team working Qualifications Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. Knowledge in welding or non destructive testing - desirable. Additional information Training: several months training periods on various localisation in France and Europe. Some out of hours working will be required All profiles will be reviewed against the required skills and experience. Due to the high number of applications, we will only be able to respond to successful applicants in the first instance. We thank you for your interest and the time taken to apply!
26/03/2024
Project-based
Role Title: Junior Surveillance Mechanical Engineer Duration: 6 months Location: Hinkley Point C, Bridgwater, Somerset (full time on site) Rate: £Competitive - Umbrella only As a mechanical surveillance engineer, you will join EIRA team in charge of the surveillance of the manufacturing and installation of nuclear equipment for worldwide power plants. It is a rewarding experience that starts with comprehensive training and tutoring, with the objective of good respect of the contractual technical requirements, the manufacturing and installation follow-up of equipment's with the highest quality and safety level. The surveillance engineer is a key player during the installation phases as an in-the-field representative. The surveillance engineer works closely with the other departments (quality, installation, project, engineering, procurement, expediting, cost) to ensure the conformity of the manufacturing or installation activities and of equipment's on factories or construction site. EIRA team also gives the opportunity to develop technical skills on a wider range of equipment's, such as pressure vessel, steam generators, pumps, valves, instrumentation, and offers worldwide opportunity of experience. Our client is looking for a Mechanical Engineer for the surveillance of the primary loop installation activities for the Hinkley Point EPR construction site. Role purpose/summary Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning Ensure the surveillance plan is respected Review the Follow up Documents and End of Installation reports Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures) Organize your own schedules of surveillance activities with the surveillance leader Contribute to open points treatments and closure Participate to progress meetings with installation, projects, suppliers or customers Key Skills/requirements Min 1 year experience with technical degree qualification Manufacturing processes knowledge (welding, foundry, forge) Destructive (chemical or mechanical testing) and non-destructive testing (PT, UT, RT, EC, MT) knowledge Quality fundamentals knowledge Ability to read and understand the technical engineering documents of scheme Fluent English (spoken and written) Organisation Capability to defend and explain own observations Being critical and analytical minded to be able to identify deviations and to contribute to their resolution Autonomy to manage the surveillance on-site schedule or business trip Team working Qualifications Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. Knowledge in welding or non destructive testing - desirable. Additional information Training: several months training periods on various localisation in France and Europe. Some out of hours working will be required All profiles will be reviewed against the required skills and experience. Due to the high number of applications, we will only be able to respond to successful applicants in the first instance. We thank you for your interest and the time taken to apply!
Job Title: Manufacturing/Maintenance Technician Location: Portsmouth, Onsite Rate: £18-£23 per hour Contract Length: 3 months rolling (PAYE) Start Date: ASAP We are currently working with a global company, who specialise in advanced technologies for aerospace and defence industries. They provide aviation systems, aircraft engines, connectivity solutions, and defence technologies globally. With a focus on innovation, they offer maintenance services and contribute to space systems, maintaining a commitment to cutting-edge solutions. The Role As a Manufacturing Technician, you will be supporting, maintaining, and improving the production equipment to maximise manufacturing availability. Your other daily duties will include but will not be limited to: Sustain production equipment to achieve a target up time of at least 95% availability. Swiftly identify the underlying causes of equipment failures and execute necessary repairs. Oversee an established Planned Maintenance system, adhering to a predetermined schedule, recognising potential operator tasks to uphold process uptime, and optimise capacity. Manage the Planned Maintenance system and calibrate production ATE systems. Handle the servicing and repair of gas regulators. Guarantee the availability of adequate spares for a prompt response to component failures. Specify and execute enhancements to the production process or equipment, aiming for cost, productivity, or quality improvements. Complete necessary risk assessments for processes, equipment, and ergonomics. Ensure the timely completion of HSE actions. Draft technical documents outlining procedures, encompassing cell maintenance instructions, and defining TPM schedules. Collaborate with external partners/vendors on technical aspects of production equipment and spares. Create or detail essential jigs and fixtures. About You A minimum of three years' experience in a medium to high volume production environment is mandatory. Practical experience demonstrating a hands-on and methodical approach to mechanical and electrical fault diagnosis/analysis, utilising diagnostic tools/equipment. Effective communication skills with internal customers and external suppliers, encompassing both technical matters and general levels. Proven working knowledge of assembly automation, including the ability to diagnose pneumatic system logic. Previous experience in the installation/testing, and fault finding of electrical systems. Experience with PLC programming and control system interrogation would be advantageous. A diverse range of qualifications may be considered; however, a robust Engineering background is envisioned, preferably supported by a recognised Mechanical or Electrical apprenticeship. Possession of an ONC/HNC in an Engineering discipline would be advantageous. Electrical installation Qualification to a minimum of 17th Edition Proficiency in Literacy and Numeracy. Computer literacy is essential, with experience using MS Office. Essential qualities include being a team player. Ability to seek assistance from fellow employees. Organisational skills are imperative. Open-minded, flexible, and adaptable. Punctuality and reliability are key attributes. Proactive attitude, particularly in Health, Safety, and Environment (HSE) matters. If this is of interest to you, please apply with your latest CV.
26/03/2024
Project-based
Job Title: Manufacturing/Maintenance Technician Location: Portsmouth, Onsite Rate: £18-£23 per hour Contract Length: 3 months rolling (PAYE) Start Date: ASAP We are currently working with a global company, who specialise in advanced technologies for aerospace and defence industries. They provide aviation systems, aircraft engines, connectivity solutions, and defence technologies globally. With a focus on innovation, they offer maintenance services and contribute to space systems, maintaining a commitment to cutting-edge solutions. The Role As a Manufacturing Technician, you will be supporting, maintaining, and improving the production equipment to maximise manufacturing availability. Your other daily duties will include but will not be limited to: Sustain production equipment to achieve a target up time of at least 95% availability. Swiftly identify the underlying causes of equipment failures and execute necessary repairs. Oversee an established Planned Maintenance system, adhering to a predetermined schedule, recognising potential operator tasks to uphold process uptime, and optimise capacity. Manage the Planned Maintenance system and calibrate production ATE systems. Handle the servicing and repair of gas regulators. Guarantee the availability of adequate spares for a prompt response to component failures. Specify and execute enhancements to the production process or equipment, aiming for cost, productivity, or quality improvements. Complete necessary risk assessments for processes, equipment, and ergonomics. Ensure the timely completion of HSE actions. Draft technical documents outlining procedures, encompassing cell maintenance instructions, and defining TPM schedules. Collaborate with external partners/vendors on technical aspects of production equipment and spares. Create or detail essential jigs and fixtures. About You A minimum of three years' experience in a medium to high volume production environment is mandatory. Practical experience demonstrating a hands-on and methodical approach to mechanical and electrical fault diagnosis/analysis, utilising diagnostic tools/equipment. Effective communication skills with internal customers and external suppliers, encompassing both technical matters and general levels. Proven working knowledge of assembly automation, including the ability to diagnose pneumatic system logic. Previous experience in the installation/testing, and fault finding of electrical systems. Experience with PLC programming and control system interrogation would be advantageous. A diverse range of qualifications may be considered; however, a robust Engineering background is envisioned, preferably supported by a recognised Mechanical or Electrical apprenticeship. Possession of an ONC/HNC in an Engineering discipline would be advantageous. Electrical installation Qualification to a minimum of 17th Edition Proficiency in Literacy and Numeracy. Computer literacy is essential, with experience using MS Office. Essential qualities include being a team player. Ability to seek assistance from fellow employees. Organisational skills are imperative. Open-minded, flexible, and adaptable. Punctuality and reliability are key attributes. Proactive attitude, particularly in Health, Safety, and Environment (HSE) matters. If this is of interest to you, please apply with your latest CV.
You would be joining a leading automation services provider with a reputation for excellence and innovation. They help their customers to automate any manufacturing process, from simple to complex, across a range of sectors. You will be able to apply your technical engineering background (think of your previous days as a Controls Systems/Automation Engineer within industrial automation ) to ensure your project teams meet their project deadlines without compromising on the quality of solutions to customers. This role would not be the best fit if you do not have industrial automation experience - this is an essential skill and those who are more in the IT sector/general PM experience will not be able to be considered. Whether it's Pharmaceutical, Chemical, Energy, Aerospace or Logistics, they have the expertise and experience to handle it. You will be joining a small team of Project Managers to manage the full project life cycle from initial request to the final handover. You will be responsible for: Responsible for specifying and delivering projects to meet customer requirements and expectations. You are slick in planning and controlling milestones, risk management, internal and external reporting, supplier management and quality control. You are a team player who is decisive, adaptable and accountable whilst having a genuine interest in actively developing those who report to you. This role will require you to work in their Bristol office for three days a week, so you must be willing to relocate or already be within a commutable distance of Bristol. This is a great opportunity to join a dynamic and successful company that values its people and rewards their performance. You will receive a competitive salary of up to £65,000 per annum dependent on experience plus benefits including 25 days holiday entitlement and private medical. *Candidates requiring sponsorship or not already a full time resident of the UK will not be eligible to apply* To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
25/03/2024
Full time
You would be joining a leading automation services provider with a reputation for excellence and innovation. They help their customers to automate any manufacturing process, from simple to complex, across a range of sectors. You will be able to apply your technical engineering background (think of your previous days as a Controls Systems/Automation Engineer within industrial automation ) to ensure your project teams meet their project deadlines without compromising on the quality of solutions to customers. This role would not be the best fit if you do not have industrial automation experience - this is an essential skill and those who are more in the IT sector/general PM experience will not be able to be considered. Whether it's Pharmaceutical, Chemical, Energy, Aerospace or Logistics, they have the expertise and experience to handle it. You will be joining a small team of Project Managers to manage the full project life cycle from initial request to the final handover. You will be responsible for: Responsible for specifying and delivering projects to meet customer requirements and expectations. You are slick in planning and controlling milestones, risk management, internal and external reporting, supplier management and quality control. You are a team player who is decisive, adaptable and accountable whilst having a genuine interest in actively developing those who report to you. This role will require you to work in their Bristol office for three days a week, so you must be willing to relocate or already be within a commutable distance of Bristol. This is a great opportunity to join a dynamic and successful company that values its people and rewards their performance. You will receive a competitive salary of up to £65,000 per annum dependent on experience plus benefits including 25 days holiday entitlement and private medical. *Candidates requiring sponsorship or not already a full time resident of the UK will not be eligible to apply* To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
The System Architecture Group is responsible for strategy, architecture, design, and plan - covering all technology aspects from customer terminal to gateways. The function will ensure deeper engineering focus for new tech induction, hybrid fleet and network integration, customer solutions, resource optimization, business efficiency, and profitability Client Details Our client is a leading provider of satellite operations across the globe. Description ROLE PURPOSE The role will report directly into the Head of System Engineering and whilst specific responsibilities will be dependent upon the changing needs of the business, the following provides an overview of the role's key responsibilities and measures Architect, Design and Deliver solutions using existing Infrastructure components. Where new infrastructure technologies are being introduced, implement them, and establish best practice for their adoption. Resolve incidents that have not been seen before and initiate change to ensure that issues can be easily dealt with in future. Contribute to the Technology Roadmap for the businesses Technology Data Centres and Services Evaluate new tools and techniques being able to understand their value and impact. Lead group design discussions on my area of expertise and be able to present with authority to a variety of audiences. Coach and mentor system engineers across Technology who are at a more junior level. Ensure that my own team's designs are of a high quality and understand the impacts to any other areas of infrastructure. Keep technical skills up to date and keep track of new technologies, understanding how they might benefit the Technology team Introduce automation for high performance and effectiveness. Be the key technical and design authority for the Team and along with the Solution Engineering, the main relationship holder with the Architecture and Product Team. KEY ACCOUNTABILITIES Experience designing and deploying solutions for large, complex global organisations Analytical and structured approach to design, process, and advanced troubleshooting Ability to produce and maintain high quality HLD/LLD and Standards documentation Well organised self-starter who takes personal ownership and accountability at required levels of the work stream and project life cycles; willing to go the extra mile at every opportunity Builds and maintains positive relationships within and across teams Provides technical leadership within teams and mentoring for individuals Communicates effectively, able to deliver and present both written and verbal, designs, strategies and concepts clearly and effectively to Senior & Jnr staff alike Profile SKILLS AND QUALIFICATIONS Required Technology Skills: Excellent/CCNA levels of practical experience in designing/building, operating large-scale, Multilayer Switching and Routing using Juniper or preferably Arista and Cisco equipment and OS in a WAN and LAN environment using technologies like Multicast, Port Channelling, EIGRP, CDP, GLBP, VRF, QoS Very good knowledge of Wide Area Networking technologies and protocols, such as MPLS, WAN,CoS, DWDM. Ideally, with experience of dealing with major Global Comms suppliers Excellent technical knowledge of OSI network topologies, troubleshooting and design eg Routing Protocols (BGP, OSPF, iGRP), DNS, DHCP, IP Address Management and TCP/UDP Port RFC & IEEE 802-based standards. Juniper/Cisco Switches deployed in Spine/Leaf topology High levels of VPN experience along with associated technologies and protocols eg IPSec, Public/Private Key Encryption, TLS/SSL, digital cert techniques like ISA/KMP GRE and DMVPN High levels of Load balancing & Global/DNS balancing technologies and techniques, preferably Fortinet hardware and/or software appliances/cloud versions Good understanding of browser-based technologies and protocols like HTML, HTTP/HTTPS and XML Good understanding of Network Management technologies and protocols like SNMP, Netflow, IPSLA, along with practical experience of associated Network Management & Alerting Tools Desired Technical Skills (on top of the above mandatory skills) Good technical knowledge of Firewalls Platforms and Technologies, including build/configuration of some of the following Fortinet (pref along with associated Management Systems and Firewall rule analysis tools eg Skybox, Tufin High levels of knowledge of remote access and two factor authentication technologies and AAA solutions, eg RSA, Juniper/Pulse, Cisco ACS, Radius Sound knowledge of the main Cloud/Hyper-Scalers technologies from likes of Azure, AWS and Google and associated Private and Hybrid Cloud solutions especially when it comes to network connectivity like Express Route and Direct Connect and how these function over CoLo provider technology like Equinix Cloud Exchange High levels of experience of Threat prevention and detection techniques and associated technologies like IPS, IDS, APT/SEIM, Secure Proxy. SDN/automation technologies/configuration tools/ZTP and rom likes of Juniper/MIST along with more open source/Technology-wide solutions like G.IT, Chef, Anisble or Puppet, preferably in a DevOps environment Automation and Scripting knowledge (eg Python, Unix/Linux or PowerShell & Batch) Job Offer This role is paying up to £90,000 for the perfect candidate plus up to 10% bonus based on company performance. This is a hybrid role - 2 days on site are required every week in West London
25/03/2024
Full time
The System Architecture Group is responsible for strategy, architecture, design, and plan - covering all technology aspects from customer terminal to gateways. The function will ensure deeper engineering focus for new tech induction, hybrid fleet and network integration, customer solutions, resource optimization, business efficiency, and profitability Client Details Our client is a leading provider of satellite operations across the globe. Description ROLE PURPOSE The role will report directly into the Head of System Engineering and whilst specific responsibilities will be dependent upon the changing needs of the business, the following provides an overview of the role's key responsibilities and measures Architect, Design and Deliver solutions using existing Infrastructure components. Where new infrastructure technologies are being introduced, implement them, and establish best practice for their adoption. Resolve incidents that have not been seen before and initiate change to ensure that issues can be easily dealt with in future. Contribute to the Technology Roadmap for the businesses Technology Data Centres and Services Evaluate new tools and techniques being able to understand their value and impact. Lead group design discussions on my area of expertise and be able to present with authority to a variety of audiences. Coach and mentor system engineers across Technology who are at a more junior level. Ensure that my own team's designs are of a high quality and understand the impacts to any other areas of infrastructure. Keep technical skills up to date and keep track of new technologies, understanding how they might benefit the Technology team Introduce automation for high performance and effectiveness. Be the key technical and design authority for the Team and along with the Solution Engineering, the main relationship holder with the Architecture and Product Team. KEY ACCOUNTABILITIES Experience designing and deploying solutions for large, complex global organisations Analytical and structured approach to design, process, and advanced troubleshooting Ability to produce and maintain high quality HLD/LLD and Standards documentation Well organised self-starter who takes personal ownership and accountability at required levels of the work stream and project life cycles; willing to go the extra mile at every opportunity Builds and maintains positive relationships within and across teams Provides technical leadership within teams and mentoring for individuals Communicates effectively, able to deliver and present both written and verbal, designs, strategies and concepts clearly and effectively to Senior & Jnr staff alike Profile SKILLS AND QUALIFICATIONS Required Technology Skills: Excellent/CCNA levels of practical experience in designing/building, operating large-scale, Multilayer Switching and Routing using Juniper or preferably Arista and Cisco equipment and OS in a WAN and LAN environment using technologies like Multicast, Port Channelling, EIGRP, CDP, GLBP, VRF, QoS Very good knowledge of Wide Area Networking technologies and protocols, such as MPLS, WAN,CoS, DWDM. Ideally, with experience of dealing with major Global Comms suppliers Excellent technical knowledge of OSI network topologies, troubleshooting and design eg Routing Protocols (BGP, OSPF, iGRP), DNS, DHCP, IP Address Management and TCP/UDP Port RFC & IEEE 802-based standards. Juniper/Cisco Switches deployed in Spine/Leaf topology High levels of VPN experience along with associated technologies and protocols eg IPSec, Public/Private Key Encryption, TLS/SSL, digital cert techniques like ISA/KMP GRE and DMVPN High levels of Load balancing & Global/DNS balancing technologies and techniques, preferably Fortinet hardware and/or software appliances/cloud versions Good understanding of browser-based technologies and protocols like HTML, HTTP/HTTPS and XML Good understanding of Network Management technologies and protocols like SNMP, Netflow, IPSLA, along with practical experience of associated Network Management & Alerting Tools Desired Technical Skills (on top of the above mandatory skills) Good technical knowledge of Firewalls Platforms and Technologies, including build/configuration of some of the following Fortinet (pref along with associated Management Systems and Firewall rule analysis tools eg Skybox, Tufin High levels of knowledge of remote access and two factor authentication technologies and AAA solutions, eg RSA, Juniper/Pulse, Cisco ACS, Radius Sound knowledge of the main Cloud/Hyper-Scalers technologies from likes of Azure, AWS and Google and associated Private and Hybrid Cloud solutions especially when it comes to network connectivity like Express Route and Direct Connect and how these function over CoLo provider technology like Equinix Cloud Exchange High levels of experience of Threat prevention and detection techniques and associated technologies like IPS, IDS, APT/SEIM, Secure Proxy. SDN/automation technologies/configuration tools/ZTP and rom likes of Juniper/MIST along with more open source/Technology-wide solutions like G.IT, Chef, Anisble or Puppet, preferably in a DevOps environment Automation and Scripting knowledge (eg Python, Unix/Linux or PowerShell & Batch) Job Offer This role is paying up to £90,000 for the perfect candidate plus up to 10% bonus based on company performance. This is a hybrid role - 2 days on site are required every week in West London
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.
25/03/2024
Full time
FIELD SERVICE ENGINEER Covering UK&IRE £40,000 - £50,000 + Excellent benefits Monday - Friday - door to door (44 hours) One of the UK's leading suppliers of highly complex process sterilisation and quality process equipment is now recruiting for a Field Service Engineer to join their busy and expanding field service engineering team to cover UK&IRE. As the field service engineer, you will be required to travel to customer sites in the pharmaceutical and life-sciences field, carrying out repair and maintenance on a diverse range of technologies including autoclaves/sterilisers, RO systems, steam generators etc. Key responsibilities as the Field Service Engineer: You will be required to travel across the UK and Ireland and will include nights away from home. Provide preventative maintenance, calibration and technical support, to a standard consistent with the high quality of the equipment and services the organisation supply and with the reasonable expectations of the customers. Undertake fault finding/rectification assignments as delegated by the management team Creating, preparing and managing servicing and calibration documentation as delegated by the management team Managing specific service spares Role specific administration such as reporting, expenses, and time sheets Proper management of the organisations equipment, including test equipment, computer equipment etc. Support the training of other Field Service Engineers Provide FAT support as required. Additional administrative duties as required, including but not limited to, protocol review, document creation as per QMS. Adhering to policies and procedures at all times Experience required - Field Service Engineer: ONC/HNC or equivalent in engineering (mechanical, electrical, electronic etc.) Multi-skilled engineer who has carried out service, repair and maintenance on industrial sized electro-mechanical machinery Industry background could be; FMCG, Ex-Military (Navy, REME, RAF etc.), Automation, Robotics, Pharmaceutical, Biotechnology, Semi-Conductor, Oil & Gas etc. Flexible to travel and stay away as and when required as a field service engineer Valid, UK driving licence Package/benefits: £40,000 - £50,000 depending on experience Company performance bonus Paid overtime x1.5 - Monday Friday any hours over 44 hrs (door to door travel) Overnight stay allowance - £20 for first night away raising an extra £10 per night for consecutive nights (Capped at £110/night). Once fully out on your own - Night 1-4 -£62 p/n, nights 5-7 - £80 p/n, nights 8 onwards is £100p/n. Lunch allowance Company vehicle included for personal use or the option for business use only Company Pension scheme 25 dyas holiday + bank Company phone & laptop Tools and uniform supplied Annual salary reviews (linked to inflation) plus continuously review salary in relation to performance. If you are and experienced multi-skilled field service engineer interested in making an application, please click APPLY NOW and a CBSbutler representative will be in touch to discuss this exciting opportunity.