Principal RF Engineer Basildon (4 - 5 days a week onsite) £50 - £60p/h inside IR35 (DOE) 6 months initially Our client has a fantastic opportunity for a RF/Microwave Engineer for delivery of an Inter-Vehicle Data Link communications system. We are looking for an engineer with microwave engineering knowledge familiar with working on complex electronic (ideally RF-based) sensor systems. The role will focus on the electronics design of the RF and control subsystems to be implemented on laboratory and aircraft concept demonstrators in later stages of the project. You will provide technical support throughout the product life cycle including design implementation, integration and test, system trials and product delivery. What you will do: You will be responsible for delivery of work packages focused on analogue and RF electronics, covering the inter-vehicle data link design, system test and integration. Modelling of proposed architectures to determine the optimal solution. Simulation of RF designs Documentation of designs including configuration management within the product data management tool Support to laboratory hardware demonstrator development and test. What we are looking for: You really must have: Practical hands on experience of RF design of circuitry between DC and 30 GHz. Experience of the design of PLLs in the 10 to 30 GHz frequency range. Experience of working with PCB layout personnel in an advisory capacity. Hands on experience of using RF test and measurement equipment to develop and debug RF circuitry up to 30 GHz. Ability to use RF and system modelling and simulation tools such as MATLAB and Keysight ADS. Ability to produce concise technical reports detailing design solutions and implementation. Ability to understand and follow the business practices, such as design reviews, which come with working in a high technology defence environment. Degree in relevant engineering or related scientific discipline (Electronics Engineering or Physics preferred). Ability to make technical decisions within own sphere of responsibility. Willingness to work proactively within a fast moving and dynamic environment. It would be nice if you had: Knowledge/experience of digital or mixed signal design. Experience in system level and sub-system integration and debug. Experience of working in the defence electronics sector. Experience of working with UK MOD (eg RAF, DSTL, DE&S) An understanding of the deployment of airborne military platforms, systems and operation within the enterprise environment. The nature of the programmes involving electronics design requires you to be capable of achieving full UK SC security clearance and in addition, you will require the ability to access caveated information such as UK Eyes Only and ITAR.
28/03/2024
Project-based
Principal RF Engineer Basildon (4 - 5 days a week onsite) £50 - £60p/h inside IR35 (DOE) 6 months initially Our client has a fantastic opportunity for a RF/Microwave Engineer for delivery of an Inter-Vehicle Data Link communications system. We are looking for an engineer with microwave engineering knowledge familiar with working on complex electronic (ideally RF-based) sensor systems. The role will focus on the electronics design of the RF and control subsystems to be implemented on laboratory and aircraft concept demonstrators in later stages of the project. You will provide technical support throughout the product life cycle including design implementation, integration and test, system trials and product delivery. What you will do: You will be responsible for delivery of work packages focused on analogue and RF electronics, covering the inter-vehicle data link design, system test and integration. Modelling of proposed architectures to determine the optimal solution. Simulation of RF designs Documentation of designs including configuration management within the product data management tool Support to laboratory hardware demonstrator development and test. What we are looking for: You really must have: Practical hands on experience of RF design of circuitry between DC and 30 GHz. Experience of the design of PLLs in the 10 to 30 GHz frequency range. Experience of working with PCB layout personnel in an advisory capacity. Hands on experience of using RF test and measurement equipment to develop and debug RF circuitry up to 30 GHz. Ability to use RF and system modelling and simulation tools such as MATLAB and Keysight ADS. Ability to produce concise technical reports detailing design solutions and implementation. Ability to understand and follow the business practices, such as design reviews, which come with working in a high technology defence environment. Degree in relevant engineering or related scientific discipline (Electronics Engineering or Physics preferred). Ability to make technical decisions within own sphere of responsibility. Willingness to work proactively within a fast moving and dynamic environment. It would be nice if you had: Knowledge/experience of digital or mixed signal design. Experience in system level and sub-system integration and debug. Experience of working in the defence electronics sector. Experience of working with UK MOD (eg RAF, DSTL, DE&S) An understanding of the deployment of airborne military platforms, systems and operation within the enterprise environment. The nature of the programmes involving electronics design requires you to be capable of achieving full UK SC security clearance and in addition, you will require the ability to access caveated information such as UK Eyes Only and ITAR.
Electronics Test Technician - SC Cleared Inside IR35 450 - 550 We are seeking a dedicated Electronics Test Technician to join a dynamic team. As an Electronics Test Technician, you will play a crucial role in integrating, configuring, and testing electronic products. Your responsibilities will include maintaining test specifications and procedures, configuring computer systems and ATE (Automated Test Equipment), and ensuring a safe production environment. You will work closely with senior engineers to diagnose faults, recommend process improvements, and track project status. Desirable Skills and Experience: Educated to Level 3 (ONC or equivalent) in Electrical/Electronic Engineering or relevant practical experience Familiarity with electronic components and in-circuit functionality Understanding of electronic principles, circuit diagrams, and test specifications Operation of electronic test equipment (oscilloscopes, spectrum analyzers, etc.) Experience with computer systems running Linux Proficiency in Microsoft Word and Excel Join and contribute to the success of our cutting-edge electronic products. Apply now to become a part of an innovative and collaborative work environment.
28/03/2024
Project-based
Electronics Test Technician - SC Cleared Inside IR35 450 - 550 We are seeking a dedicated Electronics Test Technician to join a dynamic team. As an Electronics Test Technician, you will play a crucial role in integrating, configuring, and testing electronic products. Your responsibilities will include maintaining test specifications and procedures, configuring computer systems and ATE (Automated Test Equipment), and ensuring a safe production environment. You will work closely with senior engineers to diagnose faults, recommend process improvements, and track project status. Desirable Skills and Experience: Educated to Level 3 (ONC or equivalent) in Electrical/Electronic Engineering or relevant practical experience Familiarity with electronic components and in-circuit functionality Understanding of electronic principles, circuit diagrams, and test specifications Operation of electronic test equipment (oscilloscopes, spectrum analyzers, etc.) Experience with computer systems running Linux Proficiency in Microsoft Word and Excel Join and contribute to the success of our cutting-edge electronic products. Apply now to become a part of an innovative and collaborative work environment.
People Source Consulting Ltd
Antrim, County Antrim
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
27/03/2024
Full time
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
People Source Consulting Ltd
Antrim, County Antrim
Our client is a leading global IT Solutions provider who are seeking to recruit a Customer Support Engineer/Service Desk Analyst to deliver unique value by collaboratively and reactively solving customer problems, providing proactive support advice, contributing to product quality and enhancements and creating self-help assets to broadly reach more customers. You will be part of a team responsible for providing an outstanding technical support experience to our business customers. From problem identification to full resolution, you will own and manage the customer experience over the phone and Web. Your responsibilities will include the below: Responsible for the customer support experience Own, troubleshoot and solve customer technical issues, using collaboration, troubleshooting best practices and transparency within and across teams (eg swarming) Identify cases that require escalation (either technically or strategically) Create and maintain incident management requests to product group/engineering group Contribute to case deflection initiatives, automation and other digital self-help assets to improve customer/engineer experience Provide ramp activities, knowledge sharing, technical coaching and mentoring Drive technical collaboration & engagement Lead or participate in building communities with peer delivery roles; may be workload or specialty specific Nice to have but not essential Knowledge and demonstrated technical proficiency in SharePoint or Microsoft Teams. General understanding of Microsoft 365 administration principles. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
27/03/2024
Full time
Our client is a leading global IT Solutions provider who are seeking to recruit a Customer Support Engineer/Service Desk Analyst to deliver unique value by collaboratively and reactively solving customer problems, providing proactive support advice, contributing to product quality and enhancements and creating self-help assets to broadly reach more customers. You will be part of a team responsible for providing an outstanding technical support experience to our business customers. From problem identification to full resolution, you will own and manage the customer experience over the phone and Web. Your responsibilities will include the below: Responsible for the customer support experience Own, troubleshoot and solve customer technical issues, using collaboration, troubleshooting best practices and transparency within and across teams (eg swarming) Identify cases that require escalation (either technically or strategically) Create and maintain incident management requests to product group/engineering group Contribute to case deflection initiatives, automation and other digital self-help assets to improve customer/engineer experience Provide ramp activities, knowledge sharing, technical coaching and mentoring Drive technical collaboration & engagement Lead or participate in building communities with peer delivery roles; may be workload or specialty specific Nice to have but not essential Knowledge and demonstrated technical proficiency in SharePoint or Microsoft Teams. General understanding of Microsoft 365 administration principles. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Subject - FPGA Developer - Xilinx - VHDL - Paignton - Competitive Salary - Excellent Benefits! Job Title - FPGA Developer (Xilinx, VHDL) Benefits - Pension, Life Insurance, Health Care, Dental, Gym, Birthday Benefits, 25 days' annual leave, Fitness Classes & Progression Location - Paignton The Client - Curo are Partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The Candidate - This role would suit a candidate with demonstrable industry experience of VHDL Product Specification & Development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. We are looking for a candidate with Xilinx FPGAs as opposed to Altera FPGAs or ASICs. The successful candidate would will have relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment, as well as strong experience in digital electronics. The Role - The key focus of this role is FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. This will include providing support, and the future development of existing Embedded firmware applications. Key Duties - FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. Design test/verification and qualification. Support and future development of existing Spirent Embedded firmware applications. Provide engineering support to internal Supply Chain and Client Services departments. Participate in the maintenance and enhancement of FPGA design processes and practices. Contribute to the on-going development and maintenance of existing products and features. Produce clear documentation to support the integration, system verification, configuration and use of the FPGA features. Requirements - Honours degree in Electronic Engineering, Computer Engineering, Computer Science, or a similar discipline Demonstrable post-graduate related experience of VHDL project specification and development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. Relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment. Experience with Xilinx FPGAs as opposed to Altera FPGAs or ASICs is preferable. Strong experience in digital electronics. HDL designer. Modelsim verification. Precision synthesis tool. Vivado place and route. Embedded firmware soft/hard platforms: Motorola Coldfire, Xilinx Microblaze or similar S/W languages C, C++, Visual Basic, TCL, Perl. Compilers: EDK hardware platform, Greenhills. Operating systems: Real Time applications running under Linux or Windows. Experience in Digital Modulation techniques, GNSS, Communications theory, Signal Processing, Encryption processes and Matlab are all advantages. Initiative - step up and take action without being asked. Look for opportunities to make a difference. Resourcefulness - adapt to new/difficult situations and devise ways to overcome obstacles. Decisive, determined, and persistent - demonstrating both individual and collective ownership. Excellent interpersonal communication and analytical skills. Team player with a highly collaborative and positive attitude. Communicates effectively with the ability to work as part of a multi-site team. Good problem-solving skills coupled with a strong aptitude to learn and innovate. Organised and methodical but also a creative thinker. To apply for this FPGA Developer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
27/03/2024
Full time
Subject - FPGA Developer - Xilinx - VHDL - Paignton - Competitive Salary - Excellent Benefits! Job Title - FPGA Developer (Xilinx, VHDL) Benefits - Pension, Life Insurance, Health Care, Dental, Gym, Birthday Benefits, 25 days' annual leave, Fitness Classes & Progression Location - Paignton The Client - Curo are Partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The Candidate - This role would suit a candidate with demonstrable industry experience of VHDL Product Specification & Development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. We are looking for a candidate with Xilinx FPGAs as opposed to Altera FPGAs or ASICs. The successful candidate would will have relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment, as well as strong experience in digital electronics. The Role - The key focus of this role is FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. This will include providing support, and the future development of existing Embedded firmware applications. Key Duties - FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. Design test/verification and qualification. Support and future development of existing Spirent Embedded firmware applications. Provide engineering support to internal Supply Chain and Client Services departments. Participate in the maintenance and enhancement of FPGA design processes and practices. Contribute to the on-going development and maintenance of existing products and features. Produce clear documentation to support the integration, system verification, configuration and use of the FPGA features. Requirements - Honours degree in Electronic Engineering, Computer Engineering, Computer Science, or a similar discipline Demonstrable post-graduate related experience of VHDL project specification and development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. Relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment. Experience with Xilinx FPGAs as opposed to Altera FPGAs or ASICs is preferable. Strong experience in digital electronics. HDL designer. Modelsim verification. Precision synthesis tool. Vivado place and route. Embedded firmware soft/hard platforms: Motorola Coldfire, Xilinx Microblaze or similar S/W languages C, C++, Visual Basic, TCL, Perl. Compilers: EDK hardware platform, Greenhills. Operating systems: Real Time applications running under Linux or Windows. Experience in Digital Modulation techniques, GNSS, Communications theory, Signal Processing, Encryption processes and Matlab are all advantages. Initiative - step up and take action without being asked. Look for opportunities to make a difference. Resourcefulness - adapt to new/difficult situations and devise ways to overcome obstacles. Decisive, determined, and persistent - demonstrating both individual and collective ownership. Excellent interpersonal communication and analytical skills. Team player with a highly collaborative and positive attitude. Communicates effectively with the ability to work as part of a multi-site team. Good problem-solving skills coupled with a strong aptitude to learn and innovate. Organised and methodical but also a creative thinker. To apply for this FPGA Developer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
Senior Connectivity Firmware/Test Engineer (Bluetooth Low Energy) 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
25/03/2024
Project-based
Senior Connectivity Firmware/Test Engineer (Bluetooth Low Energy) 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary ( Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
25/03/2024
Full time
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!
25/03/2024
Full time
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!
People Source Consulting Ltd
Antrim, County Antrim
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
22/03/2024
Full time
My client a leading IT Solutions provider are seeking to recruit an M365, Office 365 Engineer to join an ever growing Customer Support Function. This client has more than 100000 employees world wide and an unlimited amount of large Enterprise Customers to support. You will bring the below skill set: You own, investigate, and solve customer technical issues, collaborating within and across teams and leveraging troubleshooting tools and practices. You participate in communities with peer delivery roles and where appropriate, share your knowledge. You develop specific technical and professional proficiency to enable you to resolve customer issues, through training and readiness. You identify potential product defects and escalate appropriately to resolve, contributing to Microsoft product improvements. Fluency in English, with the ability to communicate effectively. Strong communication and interpersonal skills. 3+ years of experience in technical support or related field Excellent problem-solving and troubleshooting skills. Strong knowledge of Office 365 technology. Strong knowledge of Office Setup & Deployment process. Strong knowledge of Office Core applications: interface, usage/functions and troubleshooting (Word, Excel, PowerPoint, OneNote, Publisher, InfoPath, Access). Understanding Office integration with different platforms: Windows, 3rd party network shares/OS, mobiles, SharePoint, OneDrive. Additionally these would be a nice to have Networking skills and familiarity with communication protocols (ftp, HTTP, etc). Object Oriented programming. Scripting: VBS, PowerShell, JavaScript, HTML5. COM = Component Object Model. Technical literacy and hands on experience. Ability to work independently and as part of a team. Strong organizational skills and attention to detail. Additional or Preferred Qualifications (PQs) Preferred fluency in either French or German with the ability to communicate effectively it's a plus. Relevant Microsoft Technology Certifications Bachelor's degree in computer science, Information Technology (IT), or related field. A similar background such as technical consulting experience, or information technology experience is preferred. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Principal RF Engineer Basildon, Essex £50 - £69p/h Inside IR35 (DOE) 6 months initial contract Our client has a fantastic opportunity for a RF/Microwave Engineer for delivery of an Inter-Vehicle Data Link communications system. We are looking for an engineer with microwave engineering knowledge familiar with working on complex electronic (ideally RF-based) sensor systems. The role will focus on the electronics design of the RF and control subsystems to be implemented on laboratory and aircraft concept demonstrators in later stages of the project. You will provide technical support throughout the product life cycle including design implementation, integration and test, system trials and product delivery. What you will do: You will be responsible for delivery of work packages focused on analogue and RF electronics, covering the inter-vehicle data link design, system test and integration. Modelling of proposed architectures to determine the optimal solution. Simulation of RF designs Documentation of designs including configuration management within the product data management tool Support to laboratory hardware demonstrator development and test. What we are looking for: Practical hands on experience of RF design of circuitry between DC and 30 GHz. Experience of the design of PLLs in the 10 to 30 GHz frequency range. Experience of working with PCB layout personnel in an advisory capacity. Hands on experience of using RF test and measurement equipment to develop and debug RF circuitry up to 30 GHz. Ability to use RF and system modelling and simulation tools such as MATLAB and Keysight ADS. Ability to produce concise technical reports detailing design solutions and implementation. Ability to understand and follow the business practices, such as design reviews, which come with working in a high technology defence environment. Degree in relevant engineering or related scientific discipline (Electronics Engineering or Physics preferred). Ability to make technical decisions within own sphere of responsibility. Willingness to work proactively within a fast moving and dynamic environment. It would be nice if you had: Knowledge/experience of digital or mixed signal design. Experience in system level and sub-system integration and debug. Experience of working in the defence electronics sector. Experience of working with UK MOD (eg RAF, DSTL, DE&S) An understanding of the deployment of airborne military platforms, systems and operation within the enterprise environment. The nature of the programmes involving electronics design requires you to be capable of achieving full UK SC security clearance and in addition, you will require the ability to access caveated information such as UK Eyes Only and ITAR.
22/03/2024
Project-based
Principal RF Engineer Basildon, Essex £50 - £69p/h Inside IR35 (DOE) 6 months initial contract Our client has a fantastic opportunity for a RF/Microwave Engineer for delivery of an Inter-Vehicle Data Link communications system. We are looking for an engineer with microwave engineering knowledge familiar with working on complex electronic (ideally RF-based) sensor systems. The role will focus on the electronics design of the RF and control subsystems to be implemented on laboratory and aircraft concept demonstrators in later stages of the project. You will provide technical support throughout the product life cycle including design implementation, integration and test, system trials and product delivery. What you will do: You will be responsible for delivery of work packages focused on analogue and RF electronics, covering the inter-vehicle data link design, system test and integration. Modelling of proposed architectures to determine the optimal solution. Simulation of RF designs Documentation of designs including configuration management within the product data management tool Support to laboratory hardware demonstrator development and test. What we are looking for: Practical hands on experience of RF design of circuitry between DC and 30 GHz. Experience of the design of PLLs in the 10 to 30 GHz frequency range. Experience of working with PCB layout personnel in an advisory capacity. Hands on experience of using RF test and measurement equipment to develop and debug RF circuitry up to 30 GHz. Ability to use RF and system modelling and simulation tools such as MATLAB and Keysight ADS. Ability to produce concise technical reports detailing design solutions and implementation. Ability to understand and follow the business practices, such as design reviews, which come with working in a high technology defence environment. Degree in relevant engineering or related scientific discipline (Electronics Engineering or Physics preferred). Ability to make technical decisions within own sphere of responsibility. Willingness to work proactively within a fast moving and dynamic environment. It would be nice if you had: Knowledge/experience of digital or mixed signal design. Experience in system level and sub-system integration and debug. Experience of working in the defence electronics sector. Experience of working with UK MOD (eg RAF, DSTL, DE&S) An understanding of the deployment of airborne military platforms, systems and operation within the enterprise environment. The nature of the programmes involving electronics design requires you to be capable of achieving full UK SC security clearance and in addition, you will require the ability to access caveated information such as UK Eyes Only and ITAR.
Electronic Engineer - Contract - Analogue and Digital Design - Onsite Cambridge (4 days a week) £60-£110 per hour depending on experience - Outside IR35 8 months Cambridge (working week 37 hours can be performed over 4 days a week onsite) Our client is seeking talented Electronic Engineer/Design Engineers with strong analogue and high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Contract duties include: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of digital baseband circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills required: Experience with Microprocessor and Microcontroller designs Experience with memory sub-systems - eg DDR, NAND, eMMC Experience of communication interfaces and buses - USB, SPI, I2C,MIPI Low power circuit design for battery powered products Experience interacting with SW teams at the device driver level Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector Desirable: Design work relating to radio products Experience of designing for signal integrity Experience with signal and power integrity simulation tools (eg Hyperlynx, Sigrity, ADS, etc.) Experience of high-speed communications interfaces and buses - eg Gigabit Ethernet, USB3.0, PCIe etc Experience of mobile phone/cellular
22/03/2024
Project-based
Electronic Engineer - Contract - Analogue and Digital Design - Onsite Cambridge (4 days a week) £60-£110 per hour depending on experience - Outside IR35 8 months Cambridge (working week 37 hours can be performed over 4 days a week onsite) Our client is seeking talented Electronic Engineer/Design Engineers with strong analogue and high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Contract duties include: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of digital baseband circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills required: Experience with Microprocessor and Microcontroller designs Experience with memory sub-systems - eg DDR, NAND, eMMC Experience of communication interfaces and buses - USB, SPI, I2C,MIPI Low power circuit design for battery powered products Experience interacting with SW teams at the device driver level Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector Desirable: Design work relating to radio products Experience of designing for signal integrity Experience with signal and power integrity simulation tools (eg Hyperlynx, Sigrity, ADS, etc.) Experience of high-speed communications interfaces and buses - eg Gigabit Ethernet, USB3.0, PCIe etc Experience of mobile phone/cellular
A Senior Electronic Design Engineer is now needed to join a company who are expanding their Electronics team. The company are owned by a very stable global business but operate as an SME and work on a variety of projects around intrinsically safe products. As their Senior Electronics Engineer you will be working throughout the full product life cycle and joining at time when they are at the start of projects to see them all the way through to manufacturing as they also manufacture all of their products. The great thing about this company is that they are involved in many different industries giving you excellent exposure to different projects and developing your skills. The company operate on a flexible working policy 3 days on site and 2 from home + Benefits. Core skills for this role include:- 5+ years in designing in both Analogue and Digital Design Schematic Capture PCB Design Microcontrollers PCB Design Layout Alitum or similar Desirable Power supply design High speed digital design Wireless modules/RF experience (eg Wifi, BLE/Bluetooth, RFID) EMC testing, failure analysis Do not worry if you don't have every skill listed the company are really interested in passionate Engineers so please do not hesitate to get in touch, as it would be great to hear from you. I appreciate that you may not have all of the skills listed but if you feel this may be suitable lets have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
22/03/2024
Full time
A Senior Electronic Design Engineer is now needed to join a company who are expanding their Electronics team. The company are owned by a very stable global business but operate as an SME and work on a variety of projects around intrinsically safe products. As their Senior Electronics Engineer you will be working throughout the full product life cycle and joining at time when they are at the start of projects to see them all the way through to manufacturing as they also manufacture all of their products. The great thing about this company is that they are involved in many different industries giving you excellent exposure to different projects and developing your skills. The company operate on a flexible working policy 3 days on site and 2 from home + Benefits. Core skills for this role include:- 5+ years in designing in both Analogue and Digital Design Schematic Capture PCB Design Microcontrollers PCB Design Layout Alitum or similar Desirable Power supply design High speed digital design Wireless modules/RF experience (eg Wifi, BLE/Bluetooth, RFID) EMC testing, failure analysis Do not worry if you don't have every skill listed the company are really interested in passionate Engineers so please do not hesitate to get in touch, as it would be great to hear from you. I appreciate that you may not have all of the skills listed but if you feel this may be suitable lets have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.