I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £55 per hour (Inside IR35) Contract: 12 months The role must be fully aware of and adhere to Health & Safety standards and be fully familiar with all authorised documentation, Good Practice Guides and ISO standards. 1. Promote effective co-operation across Engineering and other functional teams 2. Assist in effective management of the customer, including liaison and relationship development with existing and new customers, to aid the development of business, resolution of technical and delivery issues, and such that the customer is fully briefed and informed of progress 3. Ensure procedures, codes and standards are correctly identified and applied to engineering and technical activities 4. Ensure procedures, codes and standards are correctly identified and applied to engineering and technical activities. 5. Contribute to Project Safety Assessment process 6. Ensure task and project risks are communicated and managed appropriately 7. Produce, review and approve calculations, analyses, drawings, models, design basis documentation and technical reports as assigned 8. Assessing the implications of changes, concessions and queries 9. Maintaining the engineering configuration, ensuring the overall design intent and integrity is maintained throughout design life cycle 10. Evaluate technical issues in order to develop proposals for investigations and/or solutions, including process improvements 11. Provide support to the Project Manager for the planning, control and delivery of tasks and projects 12. Make engineering decisions within own sphere of responsibility and delegated authority 13. Act as Technical Authority or Engineering Lead when authorised to do so. 14. Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 15. Keep up to date in relevant technical areas and develop skills and capabilities to be able to provide effective delivery. Maintain knowledge of Industry best practice, promote a culture of engineering best practice, support in driving cultural development and change 16. Contribute to learning from experience (LfE). requirement, during and post project 17. Support business development opportunities 18. Exercise care for own health and safety and that of others as defined by Health and Safety legislation, adhere to endorsed Company policy, procedures and delegations (eg Health & Safety, Diversity & Inclusion, Performance & Development Reviews and Finance etc.) Ensure application of highest standards for health and safety in immediate area of responsibility and ensure individual co-operation with respect to company standards about matters on health, safety and environment, ethics and behaviours 19. Support the business winning process through input into or review of tender requirements, including estimates Essential: Engineering degree (or equivalent qualification) in relevant engineering discipline, with significant demonstrable experience Chartered Engineer status (or actively working toward Chartered Status) Experience in working collaboratively in multi-discipline teams to deliver activities on a range of project types Demonstrable experience in covering a variety of tasks across a range of complexities Good communications skills and the ability to interface with other disciplines Desirable: Member of relevant institute or significant demonstrable engineering experience and capable of registration with the Engineering Council Experience in managing engineering scope for Projects from concept design to full Engineering, Procurement and Construction (EPC) Breadth and depth of experience in a range of commercial or defence projects Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
25/04/2024
Project-based
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £55 per hour (Inside IR35) Contract: 12 months The role must be fully aware of and adhere to Health & Safety standards and be fully familiar with all authorised documentation, Good Practice Guides and ISO standards. 1. Promote effective co-operation across Engineering and other functional teams 2. Assist in effective management of the customer, including liaison and relationship development with existing and new customers, to aid the development of business, resolution of technical and delivery issues, and such that the customer is fully briefed and informed of progress 3. Ensure procedures, codes and standards are correctly identified and applied to engineering and technical activities 4. Ensure procedures, codes and standards are correctly identified and applied to engineering and technical activities. 5. Contribute to Project Safety Assessment process 6. Ensure task and project risks are communicated and managed appropriately 7. Produce, review and approve calculations, analyses, drawings, models, design basis documentation and technical reports as assigned 8. Assessing the implications of changes, concessions and queries 9. Maintaining the engineering configuration, ensuring the overall design intent and integrity is maintained throughout design life cycle 10. Evaluate technical issues in order to develop proposals for investigations and/or solutions, including process improvements 11. Provide support to the Project Manager for the planning, control and delivery of tasks and projects 12. Make engineering decisions within own sphere of responsibility and delegated authority 13. Act as Technical Authority or Engineering Lead when authorised to do so. 14. Ensure application of highest standards for health and safety in immediate area of responsibility and ensure all team members across engineering co-operate with respect to company standards about matters on health, safety and environment, ethics and behaviours 15. Keep up to date in relevant technical areas and develop skills and capabilities to be able to provide effective delivery. Maintain knowledge of Industry best practice, promote a culture of engineering best practice, support in driving cultural development and change 16. Contribute to learning from experience (LfE). requirement, during and post project 17. Support business development opportunities 18. Exercise care for own health and safety and that of others as defined by Health and Safety legislation, adhere to endorsed Company policy, procedures and delegations (eg Health & Safety, Diversity & Inclusion, Performance & Development Reviews and Finance etc.) Ensure application of highest standards for health and safety in immediate area of responsibility and ensure individual co-operation with respect to company standards about matters on health, safety and environment, ethics and behaviours 19. Support the business winning process through input into or review of tender requirements, including estimates Essential: Engineering degree (or equivalent qualification) in relevant engineering discipline, with significant demonstrable experience Chartered Engineer status (or actively working toward Chartered Status) Experience in working collaboratively in multi-discipline teams to deliver activities on a range of project types Demonstrable experience in covering a variety of tasks across a range of complexities Good communications skills and the ability to interface with other disciplines Desirable: Member of relevant institute or significant demonstrable engineering experience and capable of registration with the Engineering Council Experience in managing engineering scope for Projects from concept design to full Engineering, Procurement and Construction (EPC) Breadth and depth of experience in a range of commercial or defence projects Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
25/04/2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Position : Programme Engineering Manager Location : Derby, UK Employment Type : Full-time We are seeking a dynamic and experienced Programme Engineering Manager to join a team. Reporting directly to the Managing Director, you'll play a pivotal role in executing and overseeing engineering initiatives, shaping the future of their projects. Key Responsibilities: Lead and manage engineering programs from inception to completion, ensuring adherence to budget, schedule, and risk management protocols. Resolve issues and challenges within the integrated project team, fostering collaboration and problem-solving. Ensure compliance with contractual requirements and deliverables, maintaining open communication channels with clients. Collaborate with customers to define and document project requirements, addressing technical concerns and providing regular project updates. Maintain optimal task allocation to ensure team efficiency and productivity. Develop work breakdown structures and maintain program schedules to meet project milestones. Deliver technical and programmatic presentations both internally and to clients, showcasing project progress and achievements. Utilize technical expertise to guide program direction and ensure alignment with project objectives. Monitor project spend and progress using Earned Value Management Systems. Contribute to the creation of bids and proposals for future programs. Mentor and support junior engineers within the team, fostering their professional growth and development. Cultivate strong relationships with clients, facilitating feedback and ensuring client satisfaction. Qualifications & Experience: Bachelor's degree or equivalent experience in Aeronautical Engineering, Mechanical Engineering, or a related technical field. Proven experience in a turbomachinery design environment, with a strong understanding of engineering principles. Prior experience in Project/Programme Management, including budget management, scheduling, bids, and proposals. Hands-on experience in design or other relevant engineering roles, providing a comprehensive understanding of program activities. Exceptional organizational and communication skills, with the ability to convey technical concepts effectively. Proficiency in making technical presentations to both internal stakeholders and external clients. Familiarity with testing engineering methodologies and practices. Strong scope management skills, with the ability to prioritize and delegate tasks effectively. If this sounds like it matches your skill set, please apply directly or call. Note: All candidates must be eligible to work in the UK.
25/04/2024
Full time
Position : Programme Engineering Manager Location : Derby, UK Employment Type : Full-time We are seeking a dynamic and experienced Programme Engineering Manager to join a team. Reporting directly to the Managing Director, you'll play a pivotal role in executing and overseeing engineering initiatives, shaping the future of their projects. Key Responsibilities: Lead and manage engineering programs from inception to completion, ensuring adherence to budget, schedule, and risk management protocols. Resolve issues and challenges within the integrated project team, fostering collaboration and problem-solving. Ensure compliance with contractual requirements and deliverables, maintaining open communication channels with clients. Collaborate with customers to define and document project requirements, addressing technical concerns and providing regular project updates. Maintain optimal task allocation to ensure team efficiency and productivity. Develop work breakdown structures and maintain program schedules to meet project milestones. Deliver technical and programmatic presentations both internally and to clients, showcasing project progress and achievements. Utilize technical expertise to guide program direction and ensure alignment with project objectives. Monitor project spend and progress using Earned Value Management Systems. Contribute to the creation of bids and proposals for future programs. Mentor and support junior engineers within the team, fostering their professional growth and development. Cultivate strong relationships with clients, facilitating feedback and ensuring client satisfaction. Qualifications & Experience: Bachelor's degree or equivalent experience in Aeronautical Engineering, Mechanical Engineering, or a related technical field. Proven experience in a turbomachinery design environment, with a strong understanding of engineering principles. Prior experience in Project/Programme Management, including budget management, scheduling, bids, and proposals. Hands-on experience in design or other relevant engineering roles, providing a comprehensive understanding of program activities. Exceptional organizational and communication skills, with the ability to convey technical concepts effectively. Proficiency in making technical presentations to both internal stakeholders and external clients. Familiarity with testing engineering methodologies and practices. Strong scope management skills, with the ability to prioritize and delegate tasks effectively. If this sounds like it matches your skill set, please apply directly or call. Note: All candidates must be eligible to work in the UK.
Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract We require a Robotics Engineer/Site Manager to deal with Industrial Scale Automation Sortation HardWare This is a very Data Driven role - Starting in Zaragoza but then Spanning across various EU sites (Expenses Covered) The scope would be: - Provide on-site support to Identify, analyze, optimize and resolve advanced robotics system issues. - Optimization tasks such as: parameter changes, mechanical alignments, sensor adjustments and air pressure regulation. - Partner with product development, manufacturing, and site-level reliability, maintenance, and engineering (RME) teams to maximize the performance of advanced robotics system. Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract
23/04/2024
Project-based
Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract We require a Robotics Engineer/Site Manager to deal with Industrial Scale Automation Sortation HardWare This is a very Data Driven role - Starting in Zaragoza but then Spanning across various EU sites (Expenses Covered) The scope would be: - Provide on-site support to Identify, analyze, optimize and resolve advanced robotics system issues. - Optimization tasks such as: parameter changes, mechanical alignments, sensor adjustments and air pressure regulation. - Partner with product development, manufacturing, and site-level reliability, maintenance, and engineering (RME) teams to maximize the performance of advanced robotics system. Robotics Engineer - Site Manager - Machine Data - Zaragoza (EU wide travel) 6month Contract
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
23/04/2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
19/04/2024
Project-based
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
19/04/2024
Project-based
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.