Job Title: Site Cost Controller Clearance required: BPSS Duration: 6 months Location: Bridgwater, Somerset Hours: Hybrid IR35 Status: Inside The successful candidate will be responsible for cost control of the Construction/Commissioning scope and will interface with the client on matters relating to finance. Job Description: Under the responsibility of the Project Cost Control & Finance Manager and within Project Control, you will be responsible for cost control of the Construction/Commissioning scope and will interface with the client on matters relating to finance. Be the preferred financial contact for the Site's operational staff Measure the economic performance of the Site, in support of the operational manager of the site through the production and presentation of monthly reports & analysis of variances Be responsible for reforecasting costs and at completion (Periodic Financial Review) in close collaboration with the project managers in your scope (Construction/Commissioning) Contribute to monthly closings by tracking and analysing costs. Prepare the necessary reportings to monitor actuals versus budget commitments and determine action plans to return to objectives in the event of a deviation. Cash-in management: leading the process for the full project and be responsible for the monthly statement issuance, liaison with all project management to collect qualitative information, explore and exploit opportunities Participation in negotiation with the client by being a source of proposals to optimize the project's cash flow situation Monitoring and management of the SAP analytical architecture on your perimeter Monitoring and control of Technical Change Note and Cost Change note Carry out consolidated reporting and ad hoc studies of performance, commercial and operational profitability Development of reporting in Power BI without the framework of digitalization and standardization of project reporting Key Skills and experiences: 3 years experience Good knowledge of accounting mechanisms Proficiency in Excel, SAP and Power BI Excellent communication skills Proactivity and adaptability Teamworking, ability to work with multiple business interfaces in cross-functional management Ability to understand technical issues Ability to evolve in complex organizations, with high achievement challenges Ability to organize and prioritize Ability to adapt to changes in project priorities Qualifications Master degree (Audit, financial or cost control) or engineering degree. Experience in similar roles within an audit firm or in project management control, ideally in an industrial sector. Additional information In person role working Bridgwater, Somerset Working hours - full time
24/04/2024
Project-based
Job Title: Site Cost Controller Clearance required: BPSS Duration: 6 months Location: Bridgwater, Somerset Hours: Hybrid IR35 Status: Inside The successful candidate will be responsible for cost control of the Construction/Commissioning scope and will interface with the client on matters relating to finance. Job Description: Under the responsibility of the Project Cost Control & Finance Manager and within Project Control, you will be responsible for cost control of the Construction/Commissioning scope and will interface with the client on matters relating to finance. Be the preferred financial contact for the Site's operational staff Measure the economic performance of the Site, in support of the operational manager of the site through the production and presentation of monthly reports & analysis of variances Be responsible for reforecasting costs and at completion (Periodic Financial Review) in close collaboration with the project managers in your scope (Construction/Commissioning) Contribute to monthly closings by tracking and analysing costs. Prepare the necessary reportings to monitor actuals versus budget commitments and determine action plans to return to objectives in the event of a deviation. Cash-in management: leading the process for the full project and be responsible for the monthly statement issuance, liaison with all project management to collect qualitative information, explore and exploit opportunities Participation in negotiation with the client by being a source of proposals to optimize the project's cash flow situation Monitoring and management of the SAP analytical architecture on your perimeter Monitoring and control of Technical Change Note and Cost Change note Carry out consolidated reporting and ad hoc studies of performance, commercial and operational profitability Development of reporting in Power BI without the framework of digitalization and standardization of project reporting Key Skills and experiences: 3 years experience Good knowledge of accounting mechanisms Proficiency in Excel, SAP and Power BI Excellent communication skills Proactivity and adaptability Teamworking, ability to work with multiple business interfaces in cross-functional management Ability to understand technical issues Ability to evolve in complex organizations, with high achievement challenges Ability to organize and prioritize Ability to adapt to changes in project priorities Qualifications Master degree (Audit, financial or cost control) or engineering degree. Experience in similar roles within an audit firm or in project management control, ideally in an industrial sector. Additional information In person role working Bridgwater, Somerset Working hours - full time
D365 Business Central Developer - Engineering sector - £60k - £75k My client are a manufacturing and engineering company who have a presence in UK and Europe with over 7 different entities encompassed under the parent group. They are looking to get all entities across to Business central and are at the start of their journey. With the UK and Irish entity on NAV 2016 and plans to move to Business central and the Swedish and Spanish moving across to Business central with go-live set for December 2024. They are looking for a BC Developer to work within the pre-existing systems team, developing end-to-end solutions and being the in-house technical specialist alongside the systems manager and group head of IT who are both strong NAV specialists. Key Responsibilities: Analyse the current system and assist with upgrading and migrating existing C/AL codebase to AL, ensuring compatibility and optimal performance. Collaborate with project team members, business analysts, and stakeholders to gather and document functional specifications and requirements for the upgrade project. Provide technical support, troubleshooting, and guidance to the project team throughout the upgrade process. Conduct unit testing, system integration testing, and assist in user acceptance testing (UAT) to ensure the quality and reliability of the upgraded system. Maintain and update system documentation, training materials, and best practices related to Business Central development. Ensure the integrity of the codebase for all Business Central Environments is upkept through Source control and diligent extension release management. Be the gatekeeper to all AL extensions across the company and ensure they are compliant with Change Management and Microsoft Upgrades. Would this role be of interest? Best Fergus
23/04/2024
Full time
D365 Business Central Developer - Engineering sector - £60k - £75k My client are a manufacturing and engineering company who have a presence in UK and Europe with over 7 different entities encompassed under the parent group. They are looking to get all entities across to Business central and are at the start of their journey. With the UK and Irish entity on NAV 2016 and plans to move to Business central and the Swedish and Spanish moving across to Business central with go-live set for December 2024. They are looking for a BC Developer to work within the pre-existing systems team, developing end-to-end solutions and being the in-house technical specialist alongside the systems manager and group head of IT who are both strong NAV specialists. Key Responsibilities: Analyse the current system and assist with upgrading and migrating existing C/AL codebase to AL, ensuring compatibility and optimal performance. Collaborate with project team members, business analysts, and stakeholders to gather and document functional specifications and requirements for the upgrade project. Provide technical support, troubleshooting, and guidance to the project team throughout the upgrade process. Conduct unit testing, system integration testing, and assist in user acceptance testing (UAT) to ensure the quality and reliability of the upgraded system. Maintain and update system documentation, training materials, and best practices related to Business Central development. Ensure the integrity of the codebase for all Business Central Environments is upkept through Source control and diligent extension release management. Be the gatekeeper to all AL extensions across the company and ensure they are compliant with Change Management and Microsoft Upgrades. Would this role be of interest? Best Fergus
Job Description: Infosight Consulting is looking for Project Engineer for one of the challenging and exciting projects. Role: Project Engineer Location: Leven, Fife, UK Contract Position Infosight is looking for Project Engineer with: Support the Civils Capex Project Engineer on the ground with safe working practises, adherent to RAMS, site inductions are planned and contractors have access to site in advance of activities starting. Ensure compliance with all relevant health, safety and environmental standards, including the Construction, Design & Management Regulations. The role holder will have a construction/H&S engineering management background. Use specialist knowledge to support safe deliver capex projects, working closely with Supply Operations teams and Capex Project Engineers. Consult on induction content for CDM projects (should be led by PC) Facilitate joint safety inspections with site teams Support Project Manager(s) on preparation of key H&S documentation and plans (eg PCI, CPP, Traffic Management, H&S File, Risk Assessments, site set up plan, etc) Ensure H&S has been considered at outset of project (before approval and tender issue) to ensure safety standards and ways of working are business as usual Support site set up (should be led by Project Engineer. H&S Lead to provide input/guidance and help co-ordinate implementation) Support PEs with pre-start walkthroughs, RAMS review and engage with site control of contractors process Co-ordinate with operations on key interfaces (eg temp walkways, updates to traffic management plans, security requirements, etc.) Be an ambassador/champion for H&S excellence during the construction phase, ie correct use of PPE at all times, challenging constructively where appropriate, providing feedback to project team and operatives on H&S performance, suggest ways to improve H&S performance. Attend daily white board meetings as often as practicable (frequency should be agreed with Technical Manager/Lead PE). contractors. Carry out audits and Immediate Corrective Action walks (ICAs) and record in project folder Day to day co-ordination at project interfaces (co-ordination within project boundary is main contractor responsibility) Drive accident/incident investigations including co-ordination with Global Eng Regional H&S Manager Support PEs with input of H&S Stats Assist in the delivery of any behavioural safety initiatives and training. Identify reoccurring safety concerns and proactively resolve by engaging with Skills Must have NEBOSH General Certificate as a minimum Health & Safety Management. The main focus of role is to support the Safe management of contractors: Construction/Project/Civil Management WHAT INFOSIGHT OFFERS Excellent Pay Packages An Opportunity to work in Global locations at our Client Sites Flexi-Working arrangement ABOUT INFOSIGHT Infosight Consulting is a Business & IT consulting company, head quartered in United Kingdom, operating since 2006 globally, specializes in SAP, Oracle & Ramco Solutions. Infosight has been delivering outstanding value to its customers by addressing their Business Challenges with appropriate application & services.
23/04/2024
Project-based
Job Description: Infosight Consulting is looking for Project Engineer for one of the challenging and exciting projects. Role: Project Engineer Location: Leven, Fife, UK Contract Position Infosight is looking for Project Engineer with: Support the Civils Capex Project Engineer on the ground with safe working practises, adherent to RAMS, site inductions are planned and contractors have access to site in advance of activities starting. Ensure compliance with all relevant health, safety and environmental standards, including the Construction, Design & Management Regulations. The role holder will have a construction/H&S engineering management background. Use specialist knowledge to support safe deliver capex projects, working closely with Supply Operations teams and Capex Project Engineers. Consult on induction content for CDM projects (should be led by PC) Facilitate joint safety inspections with site teams Support Project Manager(s) on preparation of key H&S documentation and plans (eg PCI, CPP, Traffic Management, H&S File, Risk Assessments, site set up plan, etc) Ensure H&S has been considered at outset of project (before approval and tender issue) to ensure safety standards and ways of working are business as usual Support site set up (should be led by Project Engineer. H&S Lead to provide input/guidance and help co-ordinate implementation) Support PEs with pre-start walkthroughs, RAMS review and engage with site control of contractors process Co-ordinate with operations on key interfaces (eg temp walkways, updates to traffic management plans, security requirements, etc.) Be an ambassador/champion for H&S excellence during the construction phase, ie correct use of PPE at all times, challenging constructively where appropriate, providing feedback to project team and operatives on H&S performance, suggest ways to improve H&S performance. Attend daily white board meetings as often as practicable (frequency should be agreed with Technical Manager/Lead PE). contractors. Carry out audits and Immediate Corrective Action walks (ICAs) and record in project folder Day to day co-ordination at project interfaces (co-ordination within project boundary is main contractor responsibility) Drive accident/incident investigations including co-ordination with Global Eng Regional H&S Manager Support PEs with input of H&S Stats Assist in the delivery of any behavioural safety initiatives and training. Identify reoccurring safety concerns and proactively resolve by engaging with Skills Must have NEBOSH General Certificate as a minimum Health & Safety Management. The main focus of role is to support the Safe management of contractors: Construction/Project/Civil Management WHAT INFOSIGHT OFFERS Excellent Pay Packages An Opportunity to work in Global locations at our Client Sites Flexi-Working arrangement ABOUT INFOSIGHT Infosight Consulting is a Business & IT consulting company, head quartered in United Kingdom, operating since 2006 globally, specializes in SAP, Oracle & Ramco Solutions. Infosight has been delivering outstanding value to its customers by addressing their Business Challenges with appropriate application & services.
Lead IT Security Manager Permanent Birmingham - 2 Days per week on site £48,900 - £61,140 per annum My client in the Rail industry are looking for a Lead IT Security Manager to join their fast-paced Operations team on a permanent basis. The Lead IT Security Manager is responsible for is the effective management of the Security Operations pillar within the IT Security, Compliance & Identity function. This includes Security technology and Security Operations Centre management. Key focus areas for this role, the ideal candidate will have experience in each of the below; Threat & Vulnerability Management Security Operations Centre - 24/7 Outsourced Web & Content Filtering - ProofPoint, Zscaler, etc. Endpoint Security Infrastructure Security Accountabilities * Lead the Security Operations pillar, determining and delivering requirements, methods, and tools to provide value and reduce risk across proactive monitoring, incident response, threat management and vulnerability management (among other activity) . * Lead the creation and maintenance of Security Operations policy, standards procedures, and documentation (including playbooks and guidance). * Manage the application and compliance of security operations procedures, reviewing actual and potential security breaches, and ensuring their investigation. * Lead the Security Operations team's response to incidents, recommending actions and appropriate control improvements. * Monitor the external environment to gather intelligence on emerging technologies, documenting impacts, threats, and opportunities to IT. * Provide expert advice on threat intelligence activities, identifying which threat categories are most dangerous to the organization and how to defend against them. * Manage vulnerability assessment activities within company IT, providing expert advice where necessary in the review of vulnerability assessment tools and techniques. * Develop, maintain, and test Security Operations' incident management procedures, investigating escalated incidents and facilitating recovery post-incident resolution. * Lead Security Operations risk management activities, leading on the identification of risks and vulnerabilities and assessment of their impacts. * Manage and oversee the day-to-day activity of the SOC supplier who will deliver security capabilities, communicating their activity to relevant teams. * Manage the design, delivery, maintenance, and continuous improvement of the IT Security Ops capabilities in line with business needs. * Manage the Security Operations Centre (SOC) capability, ensuring effective protection, defence, and response to IT security risks. * Promote the Security, Compliance & Identity function to develop and enhance the team profile to develop enduring relationships with stakeholders and teams. * Implement a multi-year Security roadmap that provides proactive capabilities which enable business objectives. * Actively promote and embed Equality Diversity and Inclusion (EDI) in all your work, and support and comply with all organisational initiatives, policies and procedures on EDI. Skills: * Relationship Building. Ability to develop and maintain strong relationships with internal and external stakeholders. * Security Operations. Ability provide leadership for live security incidents and helping conduct robust investigations in order to identify corrective actions and see them through to completion. * Threat Intelligence. Ability to provide guidance on proactive threat identification, analysis, and mitigation. Skilled in actionable intelligence, industry sources, and general awareness of threat landscape. * Vulnerability Assessment. Ability to identify and classify security vulnerabilities in networks, systems and applications and mitigating or eliminating their impact. * Risk Management. Ability to identify IT security operations risks and the delivery of audit remediation activities. * Emerging technology monitoring. Ability to identify and assess new and emerging technologies, products, services, methods and techniques. Knowledge: * Knowledge of IT Service Frameworks, methodologies, and best practice such as ITIL v4 and Agile. * Knowledge of day-to-day activities and best practice within a SOC. * Knowledge of technical security such as Firewalls, network security groups, and access controls. Type of Experience: * Experience of leading a team through the full IT service life cycle, enhancing security posture, and evolving capabilities via continual service improvement. * Experience of leading live cyber incidents and the remediation actions. * Experience of partnering with supplier teams for managed services delivery of improvements. * Experience across the full IT security spectrum (software, Servers, infrastructure, and networks). * Experience designing and implementing secure systems, leading review where necessary of complex security issues. * Experience of enabling and informing risk-based decisions. * Experience dealing with the security implications of transformation and day-to-day product changes. * Experience working with system architectures, displaying a strong understanding of the impact of vulnerabilities on varied systems Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
23/04/2024
Full time
Lead IT Security Manager Permanent Birmingham - 2 Days per week on site £48,900 - £61,140 per annum My client in the Rail industry are looking for a Lead IT Security Manager to join their fast-paced Operations team on a permanent basis. The Lead IT Security Manager is responsible for is the effective management of the Security Operations pillar within the IT Security, Compliance & Identity function. This includes Security technology and Security Operations Centre management. Key focus areas for this role, the ideal candidate will have experience in each of the below; Threat & Vulnerability Management Security Operations Centre - 24/7 Outsourced Web & Content Filtering - ProofPoint, Zscaler, etc. Endpoint Security Infrastructure Security Accountabilities * Lead the Security Operations pillar, determining and delivering requirements, methods, and tools to provide value and reduce risk across proactive monitoring, incident response, threat management and vulnerability management (among other activity) . * Lead the creation and maintenance of Security Operations policy, standards procedures, and documentation (including playbooks and guidance). * Manage the application and compliance of security operations procedures, reviewing actual and potential security breaches, and ensuring their investigation. * Lead the Security Operations team's response to incidents, recommending actions and appropriate control improvements. * Monitor the external environment to gather intelligence on emerging technologies, documenting impacts, threats, and opportunities to IT. * Provide expert advice on threat intelligence activities, identifying which threat categories are most dangerous to the organization and how to defend against them. * Manage vulnerability assessment activities within company IT, providing expert advice where necessary in the review of vulnerability assessment tools and techniques. * Develop, maintain, and test Security Operations' incident management procedures, investigating escalated incidents and facilitating recovery post-incident resolution. * Lead Security Operations risk management activities, leading on the identification of risks and vulnerabilities and assessment of their impacts. * Manage and oversee the day-to-day activity of the SOC supplier who will deliver security capabilities, communicating their activity to relevant teams. * Manage the design, delivery, maintenance, and continuous improvement of the IT Security Ops capabilities in line with business needs. * Manage the Security Operations Centre (SOC) capability, ensuring effective protection, defence, and response to IT security risks. * Promote the Security, Compliance & Identity function to develop and enhance the team profile to develop enduring relationships with stakeholders and teams. * Implement a multi-year Security roadmap that provides proactive capabilities which enable business objectives. * Actively promote and embed Equality Diversity and Inclusion (EDI) in all your work, and support and comply with all organisational initiatives, policies and procedures on EDI. Skills: * Relationship Building. Ability to develop and maintain strong relationships with internal and external stakeholders. * Security Operations. Ability provide leadership for live security incidents and helping conduct robust investigations in order to identify corrective actions and see them through to completion. * Threat Intelligence. Ability to provide guidance on proactive threat identification, analysis, and mitigation. Skilled in actionable intelligence, industry sources, and general awareness of threat landscape. * Vulnerability Assessment. Ability to identify and classify security vulnerabilities in networks, systems and applications and mitigating or eliminating their impact. * Risk Management. Ability to identify IT security operations risks and the delivery of audit remediation activities. * Emerging technology monitoring. Ability to identify and assess new and emerging technologies, products, services, methods and techniques. Knowledge: * Knowledge of IT Service Frameworks, methodologies, and best practice such as ITIL v4 and Agile. * Knowledge of day-to-day activities and best practice within a SOC. * Knowledge of technical security such as Firewalls, network security groups, and access controls. Type of Experience: * Experience of leading a team through the full IT service life cycle, enhancing security posture, and evolving capabilities via continual service improvement. * Experience of leading live cyber incidents and the remediation actions. * Experience of partnering with supplier teams for managed services delivery of improvements. * Experience across the full IT security spectrum (software, Servers, infrastructure, and networks). * Experience designing and implementing secure systems, leading review where necessary of complex security issues. * Experience of enabling and informing risk-based decisions. * Experience dealing with the security implications of transformation and day-to-day product changes. * Experience working with system architectures, displaying a strong understanding of the impact of vulnerabilities on varied systems Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Senior Python Software Engineer (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Senior Python Software Engineer/Technical Lead/Solutions Architect/Principal Engineer Good design and architecture ability Java Apache Iceberg Agile The following is DESIRABLE, not essential: Trading, Front Office finance AWS Glue Dremio Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Buy-side asset management (hedge fund, asset manager, investment management) Role: Senior Python Software Engineer (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with Python, Java, AWS and Iceberg. If you have any experience in Dremio, DBT, Arrow, Spark or related tools, this would also be very advantageous. You will join a team of 5 that are responsible for data around options and Greeks for the Front Office. They are working on projects around issuance data and improving data quality. This is a senior role in the team and will demand a strong ability in design and architecture. If you come in at the right level, you could be the deputy for the team manager. They have a very flexible hybrid working set up. Salary: £130-155k + 20% Bonus + 10% Pension
23/04/2024
Full time
Senior Python Software Engineer (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Senior Python Software Engineer/Technical Lead/Solutions Architect/Principal Engineer Good design and architecture ability Java Apache Iceberg Agile The following is DESIRABLE, not essential: Trading, Front Office finance AWS Glue Dremio Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Buy-side asset management (hedge fund, asset manager, investment management) Role: Senior Python Software Engineer (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with Python, Java, AWS and Iceberg. If you have any experience in Dremio, DBT, Arrow, Spark or related tools, this would also be very advantageous. You will join a team of 5 that are responsible for data around options and Greeks for the Front Office. They are working on projects around issuance data and improving data quality. This is a senior role in the team and will demand a strong ability in design and architecture. If you come in at the right level, you could be the deputy for the team manager. They have a very flexible hybrid working set up. Salary: £130-155k + 20% Bonus + 10% Pension
Python Technical Lead (Senior Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Python Technical Lead/Solutions Architect/Principal Engineer Good design and architecture ability Java Apache Iceberg Agile The following is DESIRABLE, not essential: Trading, Front Office finance AWS Glue Dremio Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Buy-side asset management (hedge fund, asset manager, investment management) Role: Python Technical Lead (Senior Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with Python, Java, AWS and Iceberg. If you have any experience in Dremio, DBT, Arrow, Spark or related tools, this would also be very advantageous. You will join a team of 5 that are responsible for data around options and Greeks for the Front Office. They are working on projects around issuance data and improving data quality. This is a senior role in the team and will demand a strong ability in design and architecture. If you come in at the right level, you could be the deputy for the team manager. They have a very flexible hybrid working set up. Salary: £130-155k + 20% Bonus + 10% Pension
23/04/2024
Full time
Python Technical Lead (Senior Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Python Technical Lead/Solutions Architect/Principal Engineer Good design and architecture ability Java Apache Iceberg Agile The following is DESIRABLE, not essential: Trading, Front Office finance AWS Glue Dremio Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Buy-side asset management (hedge fund, asset manager, investment management) Role: Python Technical Lead (Senior Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with Python, Java, AWS and Iceberg. If you have any experience in Dremio, DBT, Arrow, Spark or related tools, this would also be very advantageous. You will join a team of 5 that are responsible for data around options and Greeks for the Front Office. They are working on projects around issuance data and improving data quality. This is a senior role in the team and will demand a strong ability in design and architecture. If you come in at the right level, you could be the deputy for the team manager. They have a very flexible hybrid working set up. Salary: £130-155k + 20% Bonus + 10% Pension
Python Technical Lead (Senior Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Python Technical Lead/Solutions Architect/Principal Engineer Good design and architecture ability Java Apache Iceberg Agile The following is DESIRABLE, not essential: Trading, Front Office finance AWS Glue Dremio Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Buy-side asset management (hedge fund, asset manager, investment management) Role: Python Technical Lead (Senior Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with Python, Java, AWS and Iceberg. If you have any experience in Dremio, DBT, Arrow, Spark or related tools, this would also be very advantageous. You will join a team of 5 that are responsible for data around options and Greeks for the Front Office. They are working on projects around issuance data and improving data quality. This is a senior role in the team and will demand a strong ability in design and architecture. If you come in at the right level, you could be the deputy for the team manager. They have a very flexible hybrid working set up. Salary: £100-130k + 20% Bonus + 10% Pension
23/04/2024
Full time
Python Technical Lead (Senior Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Python Technical Lead/Solutions Architect/Principal Engineer Good design and architecture ability Java Apache Iceberg Agile The following is DESIRABLE, not essential: Trading, Front Office finance AWS Glue Dremio Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Buy-side asset management (hedge fund, asset manager, investment management) Role: Python Technical Lead (Senior Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with Python, Java, AWS and Iceberg. If you have any experience in Dremio, DBT, Arrow, Spark or related tools, this would also be very advantageous. You will join a team of 5 that are responsible for data around options and Greeks for the Front Office. They are working on projects around issuance data and improving data quality. This is a senior role in the team and will demand a strong ability in design and architecture. If you come in at the right level, you could be the deputy for the team manager. They have a very flexible hybrid working set up. Salary: £100-130k + 20% Bonus + 10% Pension
Senior Python Software Engineer (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Senior Python Software Engineer/Technical Lead/Solutions Architect/Principal Engineer Good design and architecture ability Java Apache Iceberg Agile The following is DESIRABLE, not essential: Trading, Front Office finance AWS Glue Dremio Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Buy-side asset management (hedge fund, asset manager, investment management) Role: Senior Python Software Engineer (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with Python, Java, AWS and Iceberg. If you have any experience in Dremio, DBT, Arrow, Spark or related tools, this would also be very advantageous. You will join a team of 5 that are responsible for data around options and Greeks for the Front Office. They are working on projects around issuance data and improving data quality. This is a senior role in the team and will demand a strong ability in design and architecture. If you come in at the right level, you could be the deputy for the team manager. They have a very flexible hybrid working set up. Salary: £100-130k + 20% Bonus + 10% Pension
23/04/2024
Full time
Senior Python Software Engineer (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Senior Python Software Engineer/Technical Lead/Solutions Architect/Principal Engineer Good design and architecture ability Java Apache Iceberg Agile The following is DESIRABLE, not essential: Trading, Front Office finance AWS Glue Dremio Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Buy-side asset management (hedge fund, asset manager, investment management) Role: Senior Python Software Engineer (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Iceberg Arrow DBT gRPC protobuf TypeScript Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with Python, Java, AWS and Iceberg. If you have any experience in Dremio, DBT, Arrow, Spark or related tools, this would also be very advantageous. You will join a team of 5 that are responsible for data around options and Greeks for the Front Office. They are working on projects around issuance data and improving data quality. This is a senior role in the team and will demand a strong ability in design and architecture. If you come in at the right level, you could be the deputy for the team manager. They have a very flexible hybrid working set up. Salary: £100-130k + 20% Bonus + 10% Pension
Ready to join a long-established and trusted Lake District, IT & Website Development Company with arguably one of the best office views in the UK? We are looking for a talented 2nd/3rd line engineer to join our amazing engineering team. This opportunity comes with the flexibility to work from home 1-2 days per week, for the rest of the week you will be present at our stunning offices overlooking Skiddaw. Role info: 2nd Line/3rd IT Support Engineer Keswick, Lake District Office Based/Flexible Working - Accessible from Carlisle, Cockermouth, Penrith, Workington & Windermere £27,000 - £37,000 Depending on Experience Culture: Providing Professional Services with Integrity Through Teamwork and Continuous Learning Company: Established Proactive IT Support & Bespoke Website Design Your Background: IT Support, User Desktop Support, Server and Cloud Service Support, IP Networks, Windows Servers, MSP Sectors: IT, Customer Support, IT Support Who we are: We are an IT & Digital Services company, covering managed services contracts, Servers and network installations, wired & wireless networks, VOIP and website design and hosting. KCS offices are located in the Lake District National Park, with stunning views overlooking the breath-taking Skiddaw Massif and beyond. The area is a hub for top-class outdoor activities with some of the finest walks and outdoor goings-on in the country. This role is physically based at our office just outside Keswick and there is flexibility to allow for 1 to 2 days of remote working. The 2nd/3rd Line IT Support Engineer role: A Managed Service Provider (MSP) is a special type of IT support company. Unlike a network administrator who may get to perform one network upgrade every three years, our engineering team performs multiple network upgrade projects every year. It is essential that our team keep current with the latest industry software and cloud services stacks and can complete these network projects on time and on budget. You will be working within a Team supporting a wide range of Servers, networks and services from small to medium-sized businesses whilst keeping up to date with IT technologies. The position also involves supporting peers and juniors in their roles. Key Responsibilities: + Designing, quoting, implementing, and supporting of Windows Server infrastructures and associated networks/backup solutions including cloud solutions when required. + Managing support tickets for our client base via telephone, remote and on-site methods. + Clearly communicate with customers, partners, and 3rd parties. About you: Essential Technical Experience: + Three or more years of IT support experience. + Demonstrable troubleshooting skills that range from user desktop support to server and cloud services. + Experience with Windows Server 2016/19/22, Remote Desktop Services, Hyper-V, and Active Directory. + Desktop support including email clients, and Internet connection troubleshooting. + Office software, printer installations, and general problem diagnostics procedures. + Use of currently supported Microsoft Desktop and Server Operating Systems and M365 cloud platforms. + Backup, Continuity and Disaster Recovery (BCDR) solutions and restoration procedures. + Fundamental knowledge of IP Networks. Desired Technical Experience: + Experience with MSP software such as ConnectWise Manage/Ninja RMM. + Exposure to HP desktop/laptop and server platforms. Hands-on working knowledge of server hardware, RAID etc. + Wi-Fi networks including point-to-point Wi-Fi links. + VoIP telecommunications exposure. + Knowledge of IP Networks. + Knowledge of one of the mainstream Firewall/networking brands - Draytek, Sophos, HP, Ubiquiti, Cisco. + Knowledge of Cove, Datto, and ESET solutions would be a bonus. Non-Technical Essential Skills: + Good planning, follow-through, and documentation skills. + Adaptable interpersonal skills as you will be dealing with customers in all positions from the board level downwards. + Capability to autonomously self-assign workloads and schedule others as part of the team. + Well-presented alongside good written and verbal English skills. + Full valid UK driver's licence. Interested? Apply here for a fast-track path to the Hiring Manager. Your Previous Experience/Background Might Include: IT Support Technician, Technical Support Analyst, Helpdesk Support Technician, Associate IT Support Engineer, IT Support Specialist, Desktop Support, Desktop Support Engineer. Application notice We take your privacy seriously. When you apply, we shall process your details and pass your application to our client for review for this vacancy only. As you might expect we may contact you by email, text or telephone. Your data is processed on the basis of our legitimate interests in fulfilling the recruitment process. Please refer to our Data Privacy Policy & Notice on our website for further details. If you have any pre-application questions please contact us first quoting the job title & ref. Good luck, Team RR. This role is being managed by our talent partner RR as such there is no need for agencies to call or send speculative CVs. Many thanks.
23/04/2024
Full time
Ready to join a long-established and trusted Lake District, IT & Website Development Company with arguably one of the best office views in the UK? We are looking for a talented 2nd/3rd line engineer to join our amazing engineering team. This opportunity comes with the flexibility to work from home 1-2 days per week, for the rest of the week you will be present at our stunning offices overlooking Skiddaw. Role info: 2nd Line/3rd IT Support Engineer Keswick, Lake District Office Based/Flexible Working - Accessible from Carlisle, Cockermouth, Penrith, Workington & Windermere £27,000 - £37,000 Depending on Experience Culture: Providing Professional Services with Integrity Through Teamwork and Continuous Learning Company: Established Proactive IT Support & Bespoke Website Design Your Background: IT Support, User Desktop Support, Server and Cloud Service Support, IP Networks, Windows Servers, MSP Sectors: IT, Customer Support, IT Support Who we are: We are an IT & Digital Services company, covering managed services contracts, Servers and network installations, wired & wireless networks, VOIP and website design and hosting. KCS offices are located in the Lake District National Park, with stunning views overlooking the breath-taking Skiddaw Massif and beyond. The area is a hub for top-class outdoor activities with some of the finest walks and outdoor goings-on in the country. This role is physically based at our office just outside Keswick and there is flexibility to allow for 1 to 2 days of remote working. The 2nd/3rd Line IT Support Engineer role: A Managed Service Provider (MSP) is a special type of IT support company. Unlike a network administrator who may get to perform one network upgrade every three years, our engineering team performs multiple network upgrade projects every year. It is essential that our team keep current with the latest industry software and cloud services stacks and can complete these network projects on time and on budget. You will be working within a Team supporting a wide range of Servers, networks and services from small to medium-sized businesses whilst keeping up to date with IT technologies. The position also involves supporting peers and juniors in their roles. Key Responsibilities: + Designing, quoting, implementing, and supporting of Windows Server infrastructures and associated networks/backup solutions including cloud solutions when required. + Managing support tickets for our client base via telephone, remote and on-site methods. + Clearly communicate with customers, partners, and 3rd parties. About you: Essential Technical Experience: + Three or more years of IT support experience. + Demonstrable troubleshooting skills that range from user desktop support to server and cloud services. + Experience with Windows Server 2016/19/22, Remote Desktop Services, Hyper-V, and Active Directory. + Desktop support including email clients, and Internet connection troubleshooting. + Office software, printer installations, and general problem diagnostics procedures. + Use of currently supported Microsoft Desktop and Server Operating Systems and M365 cloud platforms. + Backup, Continuity and Disaster Recovery (BCDR) solutions and restoration procedures. + Fundamental knowledge of IP Networks. Desired Technical Experience: + Experience with MSP software such as ConnectWise Manage/Ninja RMM. + Exposure to HP desktop/laptop and server platforms. Hands-on working knowledge of server hardware, RAID etc. + Wi-Fi networks including point-to-point Wi-Fi links. + VoIP telecommunications exposure. + Knowledge of IP Networks. + Knowledge of one of the mainstream Firewall/networking brands - Draytek, Sophos, HP, Ubiquiti, Cisco. + Knowledge of Cove, Datto, and ESET solutions would be a bonus. Non-Technical Essential Skills: + Good planning, follow-through, and documentation skills. + Adaptable interpersonal skills as you will be dealing with customers in all positions from the board level downwards. + Capability to autonomously self-assign workloads and schedule others as part of the team. + Well-presented alongside good written and verbal English skills. + Full valid UK driver's licence. Interested? Apply here for a fast-track path to the Hiring Manager. Your Previous Experience/Background Might Include: IT Support Technician, Technical Support Analyst, Helpdesk Support Technician, Associate IT Support Engineer, IT Support Specialist, Desktop Support, Desktop Support Engineer. Application notice We take your privacy seriously. When you apply, we shall process your details and pass your application to our client for review for this vacancy only. As you might expect we may contact you by email, text or telephone. Your data is processed on the basis of our legitimate interests in fulfilling the recruitment process. Please refer to our Data Privacy Policy & Notice on our website for further details. If you have any pre-application questions please contact us first quoting the job title & ref. Good luck, Team RR. This role is being managed by our talent partner RR as such there is no need for agencies to call or send speculative CVs. Many thanks.
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
23/04/2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
23/04/2024
Project-based
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
Python Software Engineer Team Lead (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS GCP Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Apache Iceburg Arrow DBT gRPC protobuf Snowflake TypeScript Manager Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Python Software Engineer Team Lead/Principal Engineer/Engineering Manager Leadership experience: you must have led small teams on the delivery of projects AWS Glue Dremio Agile The following is DESIRABLE, not essential: Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Trading, Front Office finance Some appreciation of asset classes such as Fixed Income, equities, FX or commodities Role: Python Software Engineer Team Lead (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS GCP Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Arrow DBT gRPC protobuf TypeScript Manager Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with AWS, Glue, Dremio, Snowflake, Python and Java. You will lead a team of 5 engineers and collaborate with a product manager who will be assigned to the team. You will have line-management responsibility of the team and need to have previous management experience. This is a hands-on role that will include coding, code reviews, design and architectural leadership and technical strategy. Your first project for the initial 12 months, will be to classify a large number of securities over a range of industries. They have a very flexible hybrid working set up. Salary: £120k - £150k + 20% Guaranteed Bonus + 10% Pension
22/04/2024
Full time
Python Software Engineer Team Lead (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS GCP Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Apache Iceburg Arrow DBT gRPC protobuf Snowflake TypeScript Manager Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Python Software Engineer Team Lead/Principal Engineer/Engineering Manager Leadership experience: you must have led small teams on the delivery of projects AWS Glue Dremio Agile The following is DESIRABLE, not essential: Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Trading, Front Office finance Some appreciation of asset classes such as Fixed Income, equities, FX or commodities Role: Python Software Engineer Team Lead (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS GCP Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Arrow DBT gRPC protobuf TypeScript Manager Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with AWS, Glue, Dremio, Snowflake, Python and Java. You will lead a team of 5 engineers and collaborate with a product manager who will be assigned to the team. You will have line-management responsibility of the team and need to have previous management experience. This is a hands-on role that will include coding, code reviews, design and architectural leadership and technical strategy. Your first project for the initial 12 months, will be to classify a large number of securities over a range of industries. They have a very flexible hybrid working set up. Salary: £120k - £150k + 20% Guaranteed Bonus + 10% Pension
Python Software Engineer Team Lead (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS GCP Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Apache Iceburg Arrow DBT gRPC protobuf Snowflake TypeScript Manager Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Python Software Engineer Team Lead/Principal Engineer/Engineering Manager Leadership experience: you must have led small teams on the delivery of projects AWS Glue Dremio Agile The following is DESIRABLE, not essential: Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Trading, Front Office finance Some appreciation of asset classes such as Fixed Income, equities, FX or commodities Role: Python Software Engineer Team Lead (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS GCP Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Arrow DBT gRPC protobuf TypeScript Manager Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with AWS, Glue, Dremio, Snowflake, Python and Java. You will lead a team of 5 engineers and collaborate with a product manager who will be assigned to the team. You will have line-management responsibility of the team and need to have previous management experience. This is a hands-on role that will include coding, code reviews, design and architectural leadership and technical strategy. Your first project for the initial 12 months, will be to classify a large number of securities over a range of industries. They have a very flexible hybrid working set up. Salary: £150k - £180k + 20% Guaranteed Bonus + 10% Pension
22/04/2024
Full time
Python Software Engineer Team Lead (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS GCP Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Apache Iceburg Arrow DBT gRPC protobuf Snowflake TypeScript Manager Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You MUST have the following: Advanced ability as a Python Software Engineer Team Lead/Principal Engineer/Engineering Manager Leadership experience: you must have led small teams on the delivery of projects AWS Glue Dremio Agile The following is DESIRABLE, not essential: Snowflake Spark, Airflow, Apache Iceberg, Arrow, DBT Trading, Front Office finance Some appreciation of asset classes such as Fixed Income, equities, FX or commodities Role: Python Software Engineer Team Lead (Architecture Programmer Developer Java Python Software Engineer Data Enterprise Engineering Developer Programmer AWS GCP Python Athena Glue Airflow Ignite JavaScript Agile Pandas NumPy SciPy Spark Dremio Snowflake Apache Iceburg Arrow DBT gRPC protobuf TypeScript Manager Finance Trading Front Office Investment Banking Asset Manager Financial Services FX Fixed Income Equities Commodities Derivatives Hedge Fund) required by my asset management client in London. You will join a relatively new department that is responsible for the data used across the Front Office. The data is sourced from a variety of external vendors and internal departments and held in an AWS data lake, although this is being migrated to a data mesh architecture. They are working heavily with AWS, Glue, Dremio, Snowflake, Python and Java. You will lead a team of 5 engineers and collaborate with a product manager who will be assigned to the team. You will have line-management responsibility of the team and need to have previous management experience. This is a hands-on role that will include coding, code reviews, design and architectural leadership and technical strategy. Your first project for the initial 12 months, will be to classify a large number of securities over a range of industries. They have a very flexible hybrid working set up. Salary: £150k - £180k + 20% Guaranteed Bonus + 10% Pension
*We are unable to sponsor as this is a permanent Full time role* *Hybrid 3 days onsite 2 days remote* A prestigious company is looking for a Vendor Quality Assurance Manager. This manager will focus on managing all the outsourced vendors for all technical quality assurance. This manager will be managing 25-30 onshore and offshore resources. This includes QA for applications, datacenter, Back End technology, Microsoft products, etc. Responsibilities: Develop and implement specific QA tailored solutions for each production deliverable. Establish relationship and governance with internal and third-party team members to conduct Quality Assurance responsibilities. Oversee and manage a global QA team with diverse backgrounds supporting QA development, which may include one or more third-party organizations. Ensure that management and allocation of QA resources based on project needs is performed. Develop, implement, or enhance and institutionalize QA processes, including metrics/measurements, reporting, and continuous improvement, that balance risk and delivery timelines. Integrate required and suggested testing framework in the IT Technology Services organization. Staying up to date with current state-of-the-art testing practices, testing practices and testing tools Ensure that QA feedback is being used to improve deliverable life cycle processes. Works with project team members to design, develop, and execute test plans. May consult to project teams, Subject Matter Experts (SMEs), and Business Units to design and develop test plans, test cases, and execution procedures. Recommends appropriate test execution approach in consideration of cost, scope, and timeline of product/solution delivery. Identifies test execution metrics to project team members. Prepares and communicates test results and reports accurate testing status to project team members. Provides estimates of text execution to support project-level resource planning efforts. May be required to facilitate onboarding and off boarding of in-sourced and/or outsourced testing resources. Review others (team or cross team) executed test results and help determine issues and priorities. Create and maintain quality control artifacts and make available to teams within and outside of IT. Adheres to industry and Firmwide IT specific quality engineering standards and processes. May be required to step in as a product manager for products that do not have an assigned Product Manager. Qualifications Bachelor's degree in Computer Science, Computer Engineering, Information Technology or equivalent experience. 10 years of experience in software development and software quality assurance. 3 years of experience working in Agile development process. 3 years of experience with performance and load testing. 3 years of experience in management of QA organization including management of third parties that are also delivering QA services. Proficiency with software QA methodologies, tools, and processes. Proficiency in project management. Encourages fiscal responsibility and maintains confidentiality. Technologies/Software Microsoft Office applications iDevice (Iphone/IPad) Communications: Avaya Telephone/Equinox, Zoom, TEAMS, SKYPE Test Management System: JIRA, ServiceNow, ADO Project Management: Eclipse/Microsoft Project SQL (Writing simple queries) Enterprise Management Systems, Finance, Human Resource, Time Tracking, Billing, Risk SharePoint
20/04/2024
Full time
*We are unable to sponsor as this is a permanent Full time role* *Hybrid 3 days onsite 2 days remote* A prestigious company is looking for a Vendor Quality Assurance Manager. This manager will focus on managing all the outsourced vendors for all technical quality assurance. This manager will be managing 25-30 onshore and offshore resources. This includes QA for applications, datacenter, Back End technology, Microsoft products, etc. Responsibilities: Develop and implement specific QA tailored solutions for each production deliverable. Establish relationship and governance with internal and third-party team members to conduct Quality Assurance responsibilities. Oversee and manage a global QA team with diverse backgrounds supporting QA development, which may include one or more third-party organizations. Ensure that management and allocation of QA resources based on project needs is performed. Develop, implement, or enhance and institutionalize QA processes, including metrics/measurements, reporting, and continuous improvement, that balance risk and delivery timelines. Integrate required and suggested testing framework in the IT Technology Services organization. Staying up to date with current state-of-the-art testing practices, testing practices and testing tools Ensure that QA feedback is being used to improve deliverable life cycle processes. Works with project team members to design, develop, and execute test plans. May consult to project teams, Subject Matter Experts (SMEs), and Business Units to design and develop test plans, test cases, and execution procedures. Recommends appropriate test execution approach in consideration of cost, scope, and timeline of product/solution delivery. Identifies test execution metrics to project team members. Prepares and communicates test results and reports accurate testing status to project team members. Provides estimates of text execution to support project-level resource planning efforts. May be required to facilitate onboarding and off boarding of in-sourced and/or outsourced testing resources. Review others (team or cross team) executed test results and help determine issues and priorities. Create and maintain quality control artifacts and make available to teams within and outside of IT. Adheres to industry and Firmwide IT specific quality engineering standards and processes. May be required to step in as a product manager for products that do not have an assigned Product Manager. Qualifications Bachelor's degree in Computer Science, Computer Engineering, Information Technology or equivalent experience. 10 years of experience in software development and software quality assurance. 3 years of experience working in Agile development process. 3 years of experience with performance and load testing. 3 years of experience in management of QA organization including management of third parties that are also delivering QA services. Proficiency with software QA methodologies, tools, and processes. Proficiency in project management. Encourages fiscal responsibility and maintains confidentiality. Technologies/Software Microsoft Office applications iDevice (Iphone/IPad) Communications: Avaya Telephone/Equinox, Zoom, TEAMS, SKYPE Test Management System: JIRA, ServiceNow, ADO Project Management: Eclipse/Microsoft Project SQL (Writing simple queries) Enterprise Management Systems, Finance, Human Resource, Time Tracking, Billing, Risk SharePoint
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
19/04/2024
Project-based
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
19/04/2024
Project-based
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
As a Principal .NET Developer, you will report to the Director of Software Engineering based in Cork. You will play a key role in the development, architecture, maintenance, and technical direction of the Connected Services Cloud. You will be part of a growing cross-functional team of Mobile, Web, Embedded software engineers, UI/UX engineers, and product owners. Responsibilities Full end-to-end ownership of software product design and delivery Work closely with internal teams to bring a Quality First mentality and shift testing left. Cultivate a positive attitude and willingness to take on new tasks as they arise. Take part in code reviews for various languages and services Gather and define specifications and requirements based on technical needs. Operate both individually and in Tandem with other team members Work on bug fixing and improving application performance. Help teams with root cause analysis of performance & scalability issues and contribute code to help address these issues. Participate in the use of CI, source control, tracking systems, and development tools. Work closely with our Embedded, Mobile, and Web Engineering Managers and Architect on the technical direction of the Cloud. Requirements 8+ years' experience of .NET Experience Designing APIs and distributed systems. Knowledge of orchestration and containerisation technologies (such as Docker and Kubernetes). Knowledge of message queuing technologies and frameworks. Expertise in using observability, monitoring, and analytics technologies to inform choices. Knowledge of CI/CD pipelines and how to incorporate testing frameworks into them. Experience with both relational and non-relational databases (MongoDB, Snowflake, MariaDB, ArangoDB, etc). Backend microservice development experience, encompassing NoSQL, asynchronous messaging (such as Rabbit), and REST. Knowledge of AWS, Azure, and/or Google Cloud Platform, among other cloud providers. If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. I am a Principal consultant for Hays Technology, specialising in .NET technologies, helping tech professionals develop their careers and ensuring organisations are supported by the top talent. Hays Ireland is a trading division of Hays Specialist Recruitment (Ireland) Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
19/04/2024
Full time
As a Principal .NET Developer, you will report to the Director of Software Engineering based in Cork. You will play a key role in the development, architecture, maintenance, and technical direction of the Connected Services Cloud. You will be part of a growing cross-functional team of Mobile, Web, Embedded software engineers, UI/UX engineers, and product owners. Responsibilities Full end-to-end ownership of software product design and delivery Work closely with internal teams to bring a Quality First mentality and shift testing left. Cultivate a positive attitude and willingness to take on new tasks as they arise. Take part in code reviews for various languages and services Gather and define specifications and requirements based on technical needs. Operate both individually and in Tandem with other team members Work on bug fixing and improving application performance. Help teams with root cause analysis of performance & scalability issues and contribute code to help address these issues. Participate in the use of CI, source control, tracking systems, and development tools. Work closely with our Embedded, Mobile, and Web Engineering Managers and Architect on the technical direction of the Cloud. Requirements 8+ years' experience of .NET Experience Designing APIs and distributed systems. Knowledge of orchestration and containerisation technologies (such as Docker and Kubernetes). Knowledge of message queuing technologies and frameworks. Expertise in using observability, monitoring, and analytics technologies to inform choices. Knowledge of CI/CD pipelines and how to incorporate testing frameworks into them. Experience with both relational and non-relational databases (MongoDB, Snowflake, MariaDB, ArangoDB, etc). Backend microservice development experience, encompassing NoSQL, asynchronous messaging (such as Rabbit), and REST. Knowledge of AWS, Azure, and/or Google Cloud Platform, among other cloud providers. If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. I am a Principal consultant for Hays Technology, specialising in .NET technologies, helping tech professionals develop their careers and ensuring organisations are supported by the top talent. Hays Ireland is a trading division of Hays Specialist Recruitment (Ireland) Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
Position Available : Site Cost Controller Location : Hinkley Point C - Bridgwater, Somerset Salary : Market Rate - negotiable Experience needed : Experience in similar roles within an audit firm or in project management control, ideally in within the industrial sector About the role Under the responsibility of the Project Cost Control & Finance Manager and within Project Control, you will be responsible for cost control of the Construction/Commissioning scope and will interface with the client on matters relating to finance. Main Responsibilities: Serve as the main financial liaison for operational staff. Analyse and report on the economic performance of the site monthly, assisting operational managers. Collaborate closely with project managers for cost forecasting and periodic financial reviews. Track costs for monthly closings, comparing actuals to budget and devising action plans for any deviations. Manage cash flow processes and monthly statements for projects, including client negotiations for cash flow optimisation. Oversee SAP analytical architecture and monitor Technical Change Note and Cost Change Note. Provide consolidated reporting and ad hoc performance analysis. Develop Power BI reporting for projects without digitisation frameworks. What we need from you: BSc or MSc in subjects such as Auditing, Finance, Cost Control or Engineering Experience in similar roles within an audit firm or in project management control, ideally in an industrial sector Good knowledge of accounting mechanisms Proficiency in Excel, SAP and Power BI Ability to understand technical issues Teamworking, ability to work with multiple business interfaces in cross-functional management If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
19/04/2024
Project-based
Position Available : Site Cost Controller Location : Hinkley Point C - Bridgwater, Somerset Salary : Market Rate - negotiable Experience needed : Experience in similar roles within an audit firm or in project management control, ideally in within the industrial sector About the role Under the responsibility of the Project Cost Control & Finance Manager and within Project Control, you will be responsible for cost control of the Construction/Commissioning scope and will interface with the client on matters relating to finance. Main Responsibilities: Serve as the main financial liaison for operational staff. Analyse and report on the economic performance of the site monthly, assisting operational managers. Collaborate closely with project managers for cost forecasting and periodic financial reviews. Track costs for monthly closings, comparing actuals to budget and devising action plans for any deviations. Manage cash flow processes and monthly statements for projects, including client negotiations for cash flow optimisation. Oversee SAP analytical architecture and monitor Technical Change Note and Cost Change Note. Provide consolidated reporting and ad hoc performance analysis. Develop Power BI reporting for projects without digitisation frameworks. What we need from you: BSc or MSc in subjects such as Auditing, Finance, Cost Control or Engineering Experience in similar roles within an audit firm or in project management control, ideally in an industrial sector Good knowledge of accounting mechanisms Proficiency in Excel, SAP and Power BI Ability to understand technical issues Teamworking, ability to work with multiple business interfaces in cross-functional management If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
We have partnered with a global consultancy that is currently expanding its current dynamic team and seeking an experienced Site Cost Controller. As a successful candidate, under the responsibility of the Project Cost Control & Finance Manager and within Project Control, you will be responsible for cost control of the Construction/Commissioning scope and will interface with the client on matters relating to finance. Other day-to-day duties may include: Be the preferred financial contact for the Site's operational staff Measure the economic performance of the Site, in support of the operational manager of the site through the production and presentation of monthly reports & analysis of variances Be responsible for reforecasting costs and at completion (Periodic Financial Review) in close collaboration with the project managers in your scope (Construction/Commissioning) Contribute to monthly closings by tracking and analysing costs. Prepare the necessary reporting to monitor actuals versus budget commitments and determine action plans to return to objectives in the event of a deviation. Cash-in management: Leading the process for the full project and be responsible for the monthly statement issuance, liaison with all project management to collect qualitative information, explore and exploit opportunities Participation in negotiation with the client by being a source of proposals to optimize the project's cash flow situation Monitoring and management of the SAP analytical architecture on your perimeter Monitoring and control of Technical Change Notes and Cost Change note Carry out consolidated reporting and ad hoc studies of performance, commercial and operational profitability Development of reporting in Power BI without the framework of digitalization and standardization of project reporting Key Skills and Experiences: 3 years experience Good knowledge of accounting mechanisms Proficiency in Excel, SAP and Power BI Excellent communication skills Proactivity and adaptability Teamworking, ability to work with multiple business interfaces in cross-functional management Ability to understand technical issues Ability to evolve in complex organizations, with high-achievement challenges Ability to organize and prioritize Ability to adapt to changes in project priorities Qualifications Master's degree (Audit, financial or cost control) or engineering degree. Experience in similar roles within an audit firm or in project management control, ideally in an industrial sector. Additional information In-person role working on site at Bridgwater, Somerset Working hours - full time Due to the nature of the project, the successful candidate will be required to undergo a basic security vetting checks prior to the start.
19/04/2024
Project-based
We have partnered with a global consultancy that is currently expanding its current dynamic team and seeking an experienced Site Cost Controller. As a successful candidate, under the responsibility of the Project Cost Control & Finance Manager and within Project Control, you will be responsible for cost control of the Construction/Commissioning scope and will interface with the client on matters relating to finance. Other day-to-day duties may include: Be the preferred financial contact for the Site's operational staff Measure the economic performance of the Site, in support of the operational manager of the site through the production and presentation of monthly reports & analysis of variances Be responsible for reforecasting costs and at completion (Periodic Financial Review) in close collaboration with the project managers in your scope (Construction/Commissioning) Contribute to monthly closings by tracking and analysing costs. Prepare the necessary reporting to monitor actuals versus budget commitments and determine action plans to return to objectives in the event of a deviation. Cash-in management: Leading the process for the full project and be responsible for the monthly statement issuance, liaison with all project management to collect qualitative information, explore and exploit opportunities Participation in negotiation with the client by being a source of proposals to optimize the project's cash flow situation Monitoring and management of the SAP analytical architecture on your perimeter Monitoring and control of Technical Change Notes and Cost Change note Carry out consolidated reporting and ad hoc studies of performance, commercial and operational profitability Development of reporting in Power BI without the framework of digitalization and standardization of project reporting Key Skills and Experiences: 3 years experience Good knowledge of accounting mechanisms Proficiency in Excel, SAP and Power BI Excellent communication skills Proactivity and adaptability Teamworking, ability to work with multiple business interfaces in cross-functional management Ability to understand technical issues Ability to evolve in complex organizations, with high-achievement challenges Ability to organize and prioritize Ability to adapt to changes in project priorities Qualifications Master's degree (Audit, financial or cost control) or engineering degree. Experience in similar roles within an audit firm or in project management control, ideally in an industrial sector. Additional information In-person role working on site at Bridgwater, Somerset Working hours - full time Due to the nature of the project, the successful candidate will be required to undergo a basic security vetting checks prior to the start.
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing the teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
19/04/2024
Full time
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing the teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.