Tiro Partners are looking for a an Electrical Controls Engineer to join an engineering consultancy on a permanent basis. This role is paying circa £50,000. The role requires on site work in Derby. Job requirements: Experienced in Electrical Design (EPLAN/SolidWorks Preferred) Machine Safety, Instrumentation and Control PLC Programming or LabVIEW DSEAR Regulations Highly Beneficial For more information please apply with an updated copy of your CV or call.
18/04/2024
Full time
Tiro Partners are looking for a an Electrical Controls Engineer to join an engineering consultancy on a permanent basis. This role is paying circa £50,000. The role requires on site work in Derby. Job requirements: Experienced in Electrical Design (EPLAN/SolidWorks Preferred) Machine Safety, Instrumentation and Control PLC Programming or LabVIEW DSEAR Regulations Highly Beneficial For more information please apply with an updated copy of your CV or call.
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
18/04/2024
Project-based
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
18/04/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
Electrical Hardware Engineer Staffordshire (Hybrid) Up to £65,000 + benefits We have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Hardware Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Hardware Engineer will be primary based in the office in Stafford and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Electrical Hardware Engineer Minimum of 5 years experience in a similar role with qualifications in this field Strong understanding of designing electrical panels containing PLC's and LV distribution systems. Design of containment systems and electrical cabling Proven experience of AutoCAD Electrical, Microsoft office products. Working with production to see the design through to completion. Mentoring experience with junior engineer Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies Ability to develop technical solutions to meet customer and project expectations Working knowledge of BS7671 IEE 18th Edition Wiring Regulations Benefits of the Electrical Hardware Engineer 25 days holiday plus bank holidays Tailored pension planning scheme Life assurance policy and private health care Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson, by exploring the VIQU IT Recruitment website. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
18/04/2024
Full time
Electrical Hardware Engineer Staffordshire (Hybrid) Up to £65,000 + benefits We have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Hardware Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Hardware Engineer will be primary based in the office in Stafford and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Electrical Hardware Engineer Minimum of 5 years experience in a similar role with qualifications in this field Strong understanding of designing electrical panels containing PLC's and LV distribution systems. Design of containment systems and electrical cabling Proven experience of AutoCAD Electrical, Microsoft office products. Working with production to see the design through to completion. Mentoring experience with junior engineer Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies Ability to develop technical solutions to meet customer and project expectations Working knowledge of BS7671 IEE 18th Edition Wiring Regulations Benefits of the Electrical Hardware Engineer 25 days holiday plus bank holidays Tailored pension planning scheme Life assurance policy and private health care Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson, by exploring the VIQU IT Recruitment website. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Are you a skilled Instrument and Controls Engineer looking for an exciting opportunity in the oil and gas industry? Our client, a leading Oil and Gas organisation based in Aberdeen, is seeking a Senior Instrument and Controls Engineer to join their team on a 12-month temporary contract, with potential for further extension. As a Senior Instrument and Controls Engineer, you will play a crucial role in providing first-line maintenance and engineering support to their offshore assets. Reporting directly to the Maintenance and Integrity Manager, your key responsibilities will include: * Responding to and resolving instrument and control queries * Coordinating work orders and maintenance records using SAP * Producing scopes of work for project modifications * Managing equipment repairs and liaising with vendors * Conducting risk assessments for safety critical backlog work orders * Developing equipment bill of materials in your discipline area * Coordinating maintenance plans with vendors and contractors * Participating in the development of maintenance strategies and equipment plans * Supporting platform audits and conducting offshore/site surveys as required The successful candidate will have: * Relevant Engineering Degree or equivalent experience and competency + apprenticeship * Operator Experience preferred * Experience in the onshore/offshore oil and gas industry, including knowledge of process, systems, and equipment * Familiarity with SAP and other relevant software * Compliance with Company EH&S standards and regulations Our client is seeking an enthusiastic and proactive individual who can bring their expertise to the team. In return, you'll have the opportunity to work with a dynamic organisation and contribute to the success and maintenance of their offshore assets. If you are ready to take on this exciting role as a Senior Instrument and Controls Engineer, apply now! Our client is looking to fill this position quickly, so don't miss out on this fantastic opportunity to further your career in the oil and gas industry. Join their team and make a difference in their organisation! Please note that due to the high volume of applications, only shortlisted candidates will be contacted. Thank you for your understanding. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
18/04/2024
Project-based
Are you a skilled Instrument and Controls Engineer looking for an exciting opportunity in the oil and gas industry? Our client, a leading Oil and Gas organisation based in Aberdeen, is seeking a Senior Instrument and Controls Engineer to join their team on a 12-month temporary contract, with potential for further extension. As a Senior Instrument and Controls Engineer, you will play a crucial role in providing first-line maintenance and engineering support to their offshore assets. Reporting directly to the Maintenance and Integrity Manager, your key responsibilities will include: * Responding to and resolving instrument and control queries * Coordinating work orders and maintenance records using SAP * Producing scopes of work for project modifications * Managing equipment repairs and liaising with vendors * Conducting risk assessments for safety critical backlog work orders * Developing equipment bill of materials in your discipline area * Coordinating maintenance plans with vendors and contractors * Participating in the development of maintenance strategies and equipment plans * Supporting platform audits and conducting offshore/site surveys as required The successful candidate will have: * Relevant Engineering Degree or equivalent experience and competency + apprenticeship * Operator Experience preferred * Experience in the onshore/offshore oil and gas industry, including knowledge of process, systems, and equipment * Familiarity with SAP and other relevant software * Compliance with Company EH&S standards and regulations Our client is seeking an enthusiastic and proactive individual who can bring their expertise to the team. In return, you'll have the opportunity to work with a dynamic organisation and contribute to the success and maintenance of their offshore assets. If you are ready to take on this exciting role as a Senior Instrument and Controls Engineer, apply now! Our client is looking to fill this position quickly, so don't miss out on this fantastic opportunity to further your career in the oil and gas industry. Join their team and make a difference in their organisation! Please note that due to the high volume of applications, only shortlisted candidates will be contacted. Thank you for your understanding. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
Request Technology - Craig Johnson
San Francisco, California
*We are unable to sponsor for this 6+ Month Contract role* Prestigious Fortune 500 Company is currently seeking a Security Red Team Operator. Candidate will take a structured approach to Red Team operations (ie, testing in lab environments, creating and operating according to runbooks and SOPs, writing detailed after-action reports, participating in daily operation syncs). This is currently a two-person team. As such, the candidate will need to be a highly motivated, self-sufficient, and capable of collaborating on a small team where consensus is a must for operations to be successful. This role will also be involved in our Tabletop Exercise planning and execution, and therefore, will need excellent written and oral communication skills when dealing with all levels of the organization, from executives to individual contributors. The Red team is responsible for testing the overall strength of our organizations defenses (the technology, the processes, and the people) by simulating the objectives and actions of an attacker. Responsibilities: Perform internal and external penetration testing of network infrastructure and applications Perform Red team assessments including physical, social engineering, and network exploitation Perform well controlled vulnerability exploitation/penetration testing on applications, network protocols, and databases Perform network reconnaissance, OSINT, social engineering, and physical security reviews Participate in regular exercises and perform adversary simulations to test defense controls Assist with scoping prospective engagements, leading engagements from kickoff through remediation Work closely with Blue team to test efficacy of existing alerts and help create new detection. Create findings reports and communicate to stakeholders Contribute to enhancing the teams toolkit Write custom scripts to automate tasks related to finding new vulnerabilities Maintain runbooks to continually improve penetration testing methodologies and threat modelling. Qualifications : 5+ years of experience in Penetration testing, Red Team and Purple Team Bachelor of Science in Engineering, Computer Science, Information Technology, or equivalent work experience Advanced knowledge in common penetration testing tools (Metasploit, Burp Suite, Cobalt Strike, Empire, KALI Linux etc.) Must have a demonstrable understanding of voice and data networks, major operating systems, Active Directory, cloud technologies Must demonstrate knowledge of MITREs ATT&CK framework, execute and chain TTPs Must be able to critically examine an organization and system through the perspective of a threat actor and articulate risk in clear, precise terms. Ability to optimally code in a Scripting language (Python, Bash, PowerShell, Perl, etc.) OSCP
17/04/2024
Project-based
*We are unable to sponsor for this 6+ Month Contract role* Prestigious Fortune 500 Company is currently seeking a Security Red Team Operator. Candidate will take a structured approach to Red Team operations (ie, testing in lab environments, creating and operating according to runbooks and SOPs, writing detailed after-action reports, participating in daily operation syncs). This is currently a two-person team. As such, the candidate will need to be a highly motivated, self-sufficient, and capable of collaborating on a small team where consensus is a must for operations to be successful. This role will also be involved in our Tabletop Exercise planning and execution, and therefore, will need excellent written and oral communication skills when dealing with all levels of the organization, from executives to individual contributors. The Red team is responsible for testing the overall strength of our organizations defenses (the technology, the processes, and the people) by simulating the objectives and actions of an attacker. Responsibilities: Perform internal and external penetration testing of network infrastructure and applications Perform Red team assessments including physical, social engineering, and network exploitation Perform well controlled vulnerability exploitation/penetration testing on applications, network protocols, and databases Perform network reconnaissance, OSINT, social engineering, and physical security reviews Participate in regular exercises and perform adversary simulations to test defense controls Assist with scoping prospective engagements, leading engagements from kickoff through remediation Work closely with Blue team to test efficacy of existing alerts and help create new detection. Create findings reports and communicate to stakeholders Contribute to enhancing the teams toolkit Write custom scripts to automate tasks related to finding new vulnerabilities Maintain runbooks to continually improve penetration testing methodologies and threat modelling. Qualifications : 5+ years of experience in Penetration testing, Red Team and Purple Team Bachelor of Science in Engineering, Computer Science, Information Technology, or equivalent work experience Advanced knowledge in common penetration testing tools (Metasploit, Burp Suite, Cobalt Strike, Empire, KALI Linux etc.) Must have a demonstrable understanding of voice and data networks, major operating systems, Active Directory, cloud technologies Must demonstrate knowledge of MITREs ATT&CK framework, execute and chain TTPs Must be able to critically examine an organization and system through the perspective of a threat actor and articulate risk in clear, precise terms. Ability to optimally code in a Scripting language (Python, Bash, PowerShell, Perl, etc.) OSCP
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £65 per hour (Inside IR35) 12 Month - Contract Key Responsibilities (day to day duties) . Ensuring an understanding of project briefs . Experience in the Design and specification of all Mechanical Building Services systems - heating, cooling, hot and cold water systems, ventilation, controls, etc. . Knowledge of Low Pressure/High Pressure Air, Demin Water, Nitrogen, Local Exhaust Ventilation, Diesel Fuel Supply is not essential but useful. . Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, IES, Hevacomp, in-house developed tools, etc. . Preparing technical specifications using NBS . Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit - note experience of Microstation (& AECOsim) is beneficial . Attendance at meetings with clients and contractors . Site surveys, inspections and monitoring of site works . Report and technical note writing . Maintaining complete records and archives to company standards . Adherence to all quality, environmental and governance processes . Managing elements of project delivery and an understanding of budget costings . Reviewing progress, including reporting any anomalies and changes of scope to the project lead . Contribute to the technical development of junior staff Requirements Essential: . Degree qualified, or equivalent qualification, in Building Services Engineering/Mechanical Engineering or related subjects . Chartered Engineer with CIBSE or IMechE . Familiarity with the principles of building physics such as passive design solutions and fabric first approaches . Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance . Good level of computer literacy in a range of digital tools such as IES thermal modelling package, Navisworks, Hevacomp, One Click, NBS and Microsoft packages Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
17/04/2024
Project-based
I have an fantastic opportunity for a Principal Mechanical Engineer to work on an exciting 7 year framework in Glasgow. Rate: £65 per hour (Inside IR35) 12 Month - Contract Key Responsibilities (day to day duties) . Ensuring an understanding of project briefs . Experience in the Design and specification of all Mechanical Building Services systems - heating, cooling, hot and cold water systems, ventilation, controls, etc. . Knowledge of Low Pressure/High Pressure Air, Demin Water, Nitrogen, Local Exhaust Ventilation, Diesel Fuel Supply is not essential but useful. . Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, IES, Hevacomp, in-house developed tools, etc. . Preparing technical specifications using NBS . Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit - note experience of Microstation (& AECOsim) is beneficial . Attendance at meetings with clients and contractors . Site surveys, inspections and monitoring of site works . Report and technical note writing . Maintaining complete records and archives to company standards . Adherence to all quality, environmental and governance processes . Managing elements of project delivery and an understanding of budget costings . Reviewing progress, including reporting any anomalies and changes of scope to the project lead . Contribute to the technical development of junior staff Requirements Essential: . Degree qualified, or equivalent qualification, in Building Services Engineering/Mechanical Engineering or related subjects . Chartered Engineer with CIBSE or IMechE . Familiarity with the principles of building physics such as passive design solutions and fabric first approaches . Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance . Good level of computer literacy in a range of digital tools such as IES thermal modelling package, Navisworks, Hevacomp, One Click, NBS and Microsoft packages Interested or know someone that could be? Please send an up-to-date CV and I will be in touch ASAP to discuss the role in more detail. Please visit the website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy.
Robert Half are working with an etsbalished professional services organisation based in Taunton as they look to recruit an Infrastructure Engineer on a permanent basis The role My client is committed to delivering innovative and reliable solutions to their people and clients, leveraging cutting-edge technologies like Azure and Office 365 to empower the businesses and drive growth. I am seeking a talented Azure and Office 365 Engineer to join their dynamic IT team. The ideal candidate will have a strong background in cloud technologies, particularly Azure and Office 365, with a passion for designing, implementing, and managing robust solutions for the business. Responsibilities; Design, deploy, and manage Azure and Office 365 environments, ensuring high availability, scalability, and security. Collaborate with end users to understand their business requirements and provide tailored solutions that meet their needs. Migrate on-premises infrastructure and workloads to Azure and Office 365, leveraging best practices and minimising downtime. Implement and configure Azure services such as Virtual Machines, Azure Active Directory, Azure Networking, Azure Storage, and Azure Backup. Configure and manage Office 365 services including Exchange Online, SharePoint Online, OneDrive for Business, and Teams. Monitor system performance, troubleshoot issues, and optimise resources to ensure optimal performance and cost-effectiveness. Implement security measures and compliance controls to protect data and meet regulatory requirements. Provide technical guidance and support, resolving issues and addressing concerns in a timely manner. Stay current with industry trends and emerging technologies, continuously enhancing skills and knowledge to drive innovation and improvement. Experience: Have 3+ years of experience in designing, implementing, and managing Azure and Office 365 environments Demonstrate in-depth knowledge of Azure services and Office 365 applications, with hands-on experience in deployment and administration Have a strong understanding of networking concepts, security principles, and compliance standards relevant to cloud environments Be proficient in PowerShell Scripting for automation and management tasks Show excellent communication and interpersonal skills, with the ability to effectively collaborate with clients and team members Pride yourself on your strong problem solving skills and the ability to troubleshoot complex technical issues Salary/working pattern: £40,000-£45,000 Hybrid working (3 days on site 2 from home) Robert Half Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. Robert Half is committed to equal opportunity and diversity. Suitable candidates with equivalent qualifications and more or less experience can apply. Rates of pay and salary ranges are dependent upon your experience, qualifications and training. If you wish to apply, please read our Privacy Notice describing how we may process, disclose and store your personal data: Security alert: scammers are currently targeting jobseekers. Robert Half do not ask candidates for a fee or request candidates to send applications through instant messaging services such as WhatsApp or Telegram. Learn how to protect yourself by visiting our website:
17/04/2024
Full time
Robert Half are working with an etsbalished professional services organisation based in Taunton as they look to recruit an Infrastructure Engineer on a permanent basis The role My client is committed to delivering innovative and reliable solutions to their people and clients, leveraging cutting-edge technologies like Azure and Office 365 to empower the businesses and drive growth. I am seeking a talented Azure and Office 365 Engineer to join their dynamic IT team. The ideal candidate will have a strong background in cloud technologies, particularly Azure and Office 365, with a passion for designing, implementing, and managing robust solutions for the business. Responsibilities; Design, deploy, and manage Azure and Office 365 environments, ensuring high availability, scalability, and security. Collaborate with end users to understand their business requirements and provide tailored solutions that meet their needs. Migrate on-premises infrastructure and workloads to Azure and Office 365, leveraging best practices and minimising downtime. Implement and configure Azure services such as Virtual Machines, Azure Active Directory, Azure Networking, Azure Storage, and Azure Backup. Configure and manage Office 365 services including Exchange Online, SharePoint Online, OneDrive for Business, and Teams. Monitor system performance, troubleshoot issues, and optimise resources to ensure optimal performance and cost-effectiveness. Implement security measures and compliance controls to protect data and meet regulatory requirements. Provide technical guidance and support, resolving issues and addressing concerns in a timely manner. Stay current with industry trends and emerging technologies, continuously enhancing skills and knowledge to drive innovation and improvement. Experience: Have 3+ years of experience in designing, implementing, and managing Azure and Office 365 environments Demonstrate in-depth knowledge of Azure services and Office 365 applications, with hands-on experience in deployment and administration Have a strong understanding of networking concepts, security principles, and compliance standards relevant to cloud environments Be proficient in PowerShell Scripting for automation and management tasks Show excellent communication and interpersonal skills, with the ability to effectively collaborate with clients and team members Pride yourself on your strong problem solving skills and the ability to troubleshoot complex technical issues Salary/working pattern: £40,000-£45,000 Hybrid working (3 days on site 2 from home) Robert Half Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. Robert Half is committed to equal opportunity and diversity. Suitable candidates with equivalent qualifications and more or less experience can apply. Rates of pay and salary ranges are dependent upon your experience, qualifications and training. If you wish to apply, please read our Privacy Notice describing how we may process, disclose and store your personal data: Security alert: scammers are currently targeting jobseekers. Robert Half do not ask candidates for a fee or request candidates to send applications through instant messaging services such as WhatsApp or Telegram. Learn how to protect yourself by visiting our website:
Title : Sailpoint Engineer Location : Brussels - (1x or 2x days a week onsite is mandatory) Duration : 6 months ROLLING contract Budget : €500 - €550 per day, all inclusive Language : English THIS PROJECT IS OUTSIDE IR35 Role As a SailPoint Engineer, you will contribute to the delivery of the SailPoint infrastructure OS Upgrade. You will join the Logical Access Management project team. This role includes the analysis, design, build, test and deployment of the new infrastructure aligned to the established project governance. Your role involves working closely with colleagues in different domains (and may include external suppliers) to obtain the requirements so that you can design the optimal, secure solutions. A security focus with an understanding of the challenges our internal customers face, as well as a positive problem solving, and an analytical mindset are your strongest skills. You will be expected to document the solutions you design in clients standard templates such as a High-Level Technical Design; Detailed Functional Design; Detailed Technical Design, where you will need to obtain sign-off from reviewers while addressing all the concerns. You will build the solution in our test environment and ensure the solution goes through all the formal testing stages with our internal customers to obtain signoffs. Once tested and signed-off, you will perform handovers with the Operations Team, which may include performing training, knowledge sharing, provision of a cookbook to enable them to run and operate the solution you have designed. This will also include providing warranty support. In addition to the role you are expected to: Identify security risks and exposures during the analysis and how the design mitigate these risks. It maybe possible you identify security risks which are not in-scope, however you will be expected to call these out to ensure they are recognised to senior stakeholders who can then take action. Consider the impact on processes and controls based on the solution designed. Makes recommendations for changes and may implement agreed enhancements. Always look for solutions, rather than just call out the problems. Recognise that client is a regulated financial institution and as such your conduct must align with the compliance needs. Skills and experience A combination of several of the below should be covered: Sailpoint IIQ (Identity IQ), at least 5 to 8 years of experience implementing Sailpoint solution Identity & Access Management (IAM) Expert knowledge on one or more of following technology platforms: Windows, Unix, Network, Office/End User technologies, Mainframe, Tandem or Middleware Professional certification in CISSP, CISM and CISA, or equivalent is a plus Design, Development & Implementation of SailPoint Infrastructure Is creative and sees the bigger picture when designing solutions Works proactively, thereby keeping possible problems from affecting the overall functioning of the team Interpersonal/Soft Skills Embraces the belief that teamwork is essential for achieving results Leverages influence and negotiates to achieve the defined goals. Uses a diplomatic attitude to reach goals. Is a good communicator (verbal and written), structured and focuses on the requirements of the customer. Is capable of working in an environment with continuous change on the related services; can adapt to ever changing service needs in a spirit of continuous improvements. You are self-motivated, autonomous, problem oriented and able to make high-quality solutions considering the available means Languages: Mandatory: English excellent both speaking and writing
17/04/2024
Project-based
Title : Sailpoint Engineer Location : Brussels - (1x or 2x days a week onsite is mandatory) Duration : 6 months ROLLING contract Budget : €500 - €550 per day, all inclusive Language : English THIS PROJECT IS OUTSIDE IR35 Role As a SailPoint Engineer, you will contribute to the delivery of the SailPoint infrastructure OS Upgrade. You will join the Logical Access Management project team. This role includes the analysis, design, build, test and deployment of the new infrastructure aligned to the established project governance. Your role involves working closely with colleagues in different domains (and may include external suppliers) to obtain the requirements so that you can design the optimal, secure solutions. A security focus with an understanding of the challenges our internal customers face, as well as a positive problem solving, and an analytical mindset are your strongest skills. You will be expected to document the solutions you design in clients standard templates such as a High-Level Technical Design; Detailed Functional Design; Detailed Technical Design, where you will need to obtain sign-off from reviewers while addressing all the concerns. You will build the solution in our test environment and ensure the solution goes through all the formal testing stages with our internal customers to obtain signoffs. Once tested and signed-off, you will perform handovers with the Operations Team, which may include performing training, knowledge sharing, provision of a cookbook to enable them to run and operate the solution you have designed. This will also include providing warranty support. In addition to the role you are expected to: Identify security risks and exposures during the analysis and how the design mitigate these risks. It maybe possible you identify security risks which are not in-scope, however you will be expected to call these out to ensure they are recognised to senior stakeholders who can then take action. Consider the impact on processes and controls based on the solution designed. Makes recommendations for changes and may implement agreed enhancements. Always look for solutions, rather than just call out the problems. Recognise that client is a regulated financial institution and as such your conduct must align with the compliance needs. Skills and experience A combination of several of the below should be covered: Sailpoint IIQ (Identity IQ), at least 5 to 8 years of experience implementing Sailpoint solution Identity & Access Management (IAM) Expert knowledge on one or more of following technology platforms: Windows, Unix, Network, Office/End User technologies, Mainframe, Tandem or Middleware Professional certification in CISSP, CISM and CISA, or equivalent is a plus Design, Development & Implementation of SailPoint Infrastructure Is creative and sees the bigger picture when designing solutions Works proactively, thereby keeping possible problems from affecting the overall functioning of the team Interpersonal/Soft Skills Embraces the belief that teamwork is essential for achieving results Leverages influence and negotiates to achieve the defined goals. Uses a diplomatic attitude to reach goals. Is a good communicator (verbal and written), structured and focuses on the requirements of the customer. Is capable of working in an environment with continuous change on the related services; can adapt to ever changing service needs in a spirit of continuous improvements. You are self-motivated, autonomous, problem oriented and able to make high-quality solutions considering the available means Languages: Mandatory: English excellent both speaking and writing
Request Technology - Craig Johnson
Chicago, Illinois
* Position is bonus eligible* Prestigious Financial Institution is currently seeking an Enterprise Monitoring Technical Lead Engineer with strong Splunk experience. Candidate will lead the investigating, planning, and implementing of the enterprise monitoring system, as well as identify areas for improvement, recommend allocation of resources, and work with solution architects to craft an appropriate remediation or enhancement for these systems. Responsibilities: Translate middle and senior management strategic directives into workable technical directives Monitor project status and take remedial action on projects behind schedule and/or over budget Provide subject matter expertise for ongoing support of third-party tools like Splunk Provide expert-level technical mentoring to more junior members of the team Resolve complex support issues in non-production and production environments. Have an understanding of Cloud Native applications running on Kubernetes within AWS and how exposed APIs may be used to monitor them Assist production support and development staff in debugging environment defects using logging monitors and/or APM-related profiling data Create procedural and troubleshooting documentation related to enterprise monitoring systems and the applications they are monitoring Write complex automation scripts using common automation tools, such as Jenkins, Ansible, and Terraform for the installation, configuration, and/or upgrade of monitoring systems. Qualifications: Expert understanding of: Systems administration and change management practices Enterprise monitoring and reporting tools Experience Scripting and/or coding against APIs In-depth knowledge of common used management and monitoring tech Internet/Web based technologies ITIL Best Practices Experience with tech used to support microservices Network technologies AWS log collection such as CloudTrail, CloudWatch, VPC Flow Logs Monitoring and reporting using SNMP CI/CD tools such as Artifactory, Jenkins, and GIT Cloud native applications, including Terraform experience Technologies used to support microservices Encryption technologies (SSL/TLS, PKI Infrastructure management) Security controls as applied to software technologies Bachelor's degree in a related area 10+ years of related experience 10 years experience working in a distributed multi-platform environment. 3 years experience working with cloud native applications 3 years experience managing technical projects Cloud certification in AWS is a plus
16/04/2024
Full time
* Position is bonus eligible* Prestigious Financial Institution is currently seeking an Enterprise Monitoring Technical Lead Engineer with strong Splunk experience. Candidate will lead the investigating, planning, and implementing of the enterprise monitoring system, as well as identify areas for improvement, recommend allocation of resources, and work with solution architects to craft an appropriate remediation or enhancement for these systems. Responsibilities: Translate middle and senior management strategic directives into workable technical directives Monitor project status and take remedial action on projects behind schedule and/or over budget Provide subject matter expertise for ongoing support of third-party tools like Splunk Provide expert-level technical mentoring to more junior members of the team Resolve complex support issues in non-production and production environments. Have an understanding of Cloud Native applications running on Kubernetes within AWS and how exposed APIs may be used to monitor them Assist production support and development staff in debugging environment defects using logging monitors and/or APM-related profiling data Create procedural and troubleshooting documentation related to enterprise monitoring systems and the applications they are monitoring Write complex automation scripts using common automation tools, such as Jenkins, Ansible, and Terraform for the installation, configuration, and/or upgrade of monitoring systems. Qualifications: Expert understanding of: Systems administration and change management practices Enterprise monitoring and reporting tools Experience Scripting and/or coding against APIs In-depth knowledge of common used management and monitoring tech Internet/Web based technologies ITIL Best Practices Experience with tech used to support microservices Network technologies AWS log collection such as CloudTrail, CloudWatch, VPC Flow Logs Monitoring and reporting using SNMP CI/CD tools such as Artifactory, Jenkins, and GIT Cloud native applications, including Terraform experience Technologies used to support microservices Encryption technologies (SSL/TLS, PKI Infrastructure management) Security controls as applied to software technologies Bachelor's degree in a related area 10+ years of related experience 10 years experience working in a distributed multi-platform environment. 3 years experience working with cloud native applications 3 years experience managing technical projects Cloud certification in AWS is a plus
NO SPONSORSHIP Principal, Software Engineering Enterprise Cloud Monitoring - Splunk SALARY: $200k- $215k base w/up to 30% bonus LOCATION: Dallas, TX 3 days onsite, 2 days remote It is all about on-premises monitoring and cloud monitoring The products they are looking for outside of Splunk is Data Dog, Dynatrace, New Relic Heavy cloud, AWS, EC2, Automation, application performance monitoring, enterprise monitoring, any EMC patrol, Tivoli, and regulatory experience Responsibilities Translate middle and senior management strategic directives into workable technical directives Monitor project status and take remedial action on projects behind schedule and/or over budget Provide subject matter expertise for ongoing support of third-party tools like Splunk Provide expert-level technical mentoring to more junior members of the team Resolve complex support issues in non-production and production environments. Have an understanding of Cloud Native applications running on Kubernetes within AWS and how exposed APIs may be used to monitor them Assist production support and development staff in debugging environment defects using logging monitors and/or APM-related profiling data Create procedural and troubleshooting documentation related to enterprise monitoring systems and the applications they are monitoring Write complex automation scripts using common automation tools, such as Jenkins, Ansible, and Terraform for the installation, configuration, and/or upgrade of monitoring systems Qualifications Systems administration and change management practices Enterprise monitoring and reporting tools Experience Scripting and/or coding against APIs In-depth knowledge of common used management and monitoring tech Internet/Web based technologies ITLT Best Practices Experience with tech used to support microservices Network technologies AWS log collection such as CloudTrail, CloudWatch, VPC Flow Logs Monitoring and reporting using SNMP CI/CD tools such as Artifactory, Jenkins, and GIT Cloud native applications, including Terraform experience Technologies used to support microservices Encryption technologies (SSL/TLS, PKI Infrastructure management) Security controls as applied to software technologies Bachelor's degree 10+ years of related experience Minimum 10 years experience working in a distributed multi-platform environment. Minimum 3 years experience working with cloud native applications Minimum 3 years experience managing technical projects
16/04/2024
Full time
NO SPONSORSHIP Principal, Software Engineering Enterprise Cloud Monitoring - Splunk SALARY: $200k- $215k base w/up to 30% bonus LOCATION: Dallas, TX 3 days onsite, 2 days remote It is all about on-premises monitoring and cloud monitoring The products they are looking for outside of Splunk is Data Dog, Dynatrace, New Relic Heavy cloud, AWS, EC2, Automation, application performance monitoring, enterprise monitoring, any EMC patrol, Tivoli, and regulatory experience Responsibilities Translate middle and senior management strategic directives into workable technical directives Monitor project status and take remedial action on projects behind schedule and/or over budget Provide subject matter expertise for ongoing support of third-party tools like Splunk Provide expert-level technical mentoring to more junior members of the team Resolve complex support issues in non-production and production environments. Have an understanding of Cloud Native applications running on Kubernetes within AWS and how exposed APIs may be used to monitor them Assist production support and development staff in debugging environment defects using logging monitors and/or APM-related profiling data Create procedural and troubleshooting documentation related to enterprise monitoring systems and the applications they are monitoring Write complex automation scripts using common automation tools, such as Jenkins, Ansible, and Terraform for the installation, configuration, and/or upgrade of monitoring systems Qualifications Systems administration and change management practices Enterprise monitoring and reporting tools Experience Scripting and/or coding against APIs In-depth knowledge of common used management and monitoring tech Internet/Web based technologies ITLT Best Practices Experience with tech used to support microservices Network technologies AWS log collection such as CloudTrail, CloudWatch, VPC Flow Logs Monitoring and reporting using SNMP CI/CD tools such as Artifactory, Jenkins, and GIT Cloud native applications, including Terraform experience Technologies used to support microservices Encryption technologies (SSL/TLS, PKI Infrastructure management) Security controls as applied to software technologies Bachelor's degree 10+ years of related experience Minimum 10 years experience working in a distributed multi-platform environment. Minimum 3 years experience working with cloud native applications Minimum 3 years experience managing technical projects
NO SPONSORSHIP Principal, Software Engineering Enterprise Monitoring - Splunk SALARY: $200k- $215k base w/up to 30% bonus LOCATION: Chicago, IL 3 days onsite, 2 days remote Looking for a technical team lead over the enterprise splunk monitoring system. You will be the SME in Splunk Monitoring, Cloud Native Applications running on Kubernetes within AWS. Responsibilities Translate middle and senior management strategic directives into workable technical directives Monitor project status and take remedial action on projects behind schedule and/or over budget Provide subject matter expertise for ongoing support of third-party tools like Splunk Provide expert-level technical mentoring to more junior members of the team Resolve complex support issues in non-production and production environments. Have an understanding of Cloud Native applications running on Kubernetes within AWS and how exposed APIs may be used to monitor them Assist production support and development staff in debugging environment defects using logging monitors and/or APM-related profiling data Create procedural and troubleshooting documentation related to enterprise monitoring systems and the applications they are monitoring Write complex automation scripts using common automation tools, such as Jenkins, Ansible, and Terraform for the installation, configuration, and/or upgrade of monitoring systems Qualifications Systems administration and change management practices Enterprise monitoring and reporting tools Experience Scripting and/or coding against APIs In-depth knowledge of common used management and monitoring tech Internet/Web based technologies ITLT Best Practices Experience with tech used to support microservices Network technologies AWS log collection such as CloudTrail, CloudWatch, VPC Flow Logs Monitoring and reporting using SNMP CI/CD tools such as Artifactory, Jenkins, and GIT Cloud native applications, including Terraform experience Technologies used to support microservices Encryption technologies (SSL/TLS, PKI Infrastructure management) Security controls as applied to software technologies Bachelor's degree 10+ years of related experience Minimum 10 years experience working in a distributed multi-platform environment. Minimum 3 years experience working with cloud native applications Minimum 3 years experience managing technical projects
16/04/2024
Full time
NO SPONSORSHIP Principal, Software Engineering Enterprise Monitoring - Splunk SALARY: $200k- $215k base w/up to 30% bonus LOCATION: Chicago, IL 3 days onsite, 2 days remote Looking for a technical team lead over the enterprise splunk monitoring system. You will be the SME in Splunk Monitoring, Cloud Native Applications running on Kubernetes within AWS. Responsibilities Translate middle and senior management strategic directives into workable technical directives Monitor project status and take remedial action on projects behind schedule and/or over budget Provide subject matter expertise for ongoing support of third-party tools like Splunk Provide expert-level technical mentoring to more junior members of the team Resolve complex support issues in non-production and production environments. Have an understanding of Cloud Native applications running on Kubernetes within AWS and how exposed APIs may be used to monitor them Assist production support and development staff in debugging environment defects using logging monitors and/or APM-related profiling data Create procedural and troubleshooting documentation related to enterprise monitoring systems and the applications they are monitoring Write complex automation scripts using common automation tools, such as Jenkins, Ansible, and Terraform for the installation, configuration, and/or upgrade of monitoring systems Qualifications Systems administration and change management practices Enterprise monitoring and reporting tools Experience Scripting and/or coding against APIs In-depth knowledge of common used management and monitoring tech Internet/Web based technologies ITLT Best Practices Experience with tech used to support microservices Network technologies AWS log collection such as CloudTrail, CloudWatch, VPC Flow Logs Monitoring and reporting using SNMP CI/CD tools such as Artifactory, Jenkins, and GIT Cloud native applications, including Terraform experience Technologies used to support microservices Encryption technologies (SSL/TLS, PKI Infrastructure management) Security controls as applied to software technologies Bachelor's degree 10+ years of related experience Minimum 10 years experience working in a distributed multi-platform environment. Minimum 3 years experience working with cloud native applications Minimum 3 years experience managing technical projects
Request Technology - Craig Johnson
Chicago, Illinois
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Financial Company is currently seeking a Financial Risk Management Systems Product Manager. Candidate will be responsible for maximizing the value of the Products delivered to our stakeholders by representing business interests, working with our technology teams to determine requirements, creating a product roadmap for development, and prioritizing the work. The Product Owner will work in a hybrid agile methodology collaborating with cross-functional teams. The Product Owner must ensure that the technology teams understand and are aligned with the Product vision and that leadership is kept aware of Product progress and status. Responsibilities: Act as the primary point of contact for stakeholders regarding the product backlog and product development Interact with internal and external stakeholders such as regulators, exchanges and other external parties in explaining Products Elicit, interpret, lead requirement workshop discussions with vendors, stakeholders and/or product owners; assist in the development of backlog items and acceptance criteria Work with internal and external stakeholders to understand their needs and ensure that they are reflected in the product backlog Maintain direct communications with senior and middle management Coordinate preparation of materials for Management Committee, Board of Directors and Regulatory meetings as needed Maintain Product Vision and Roadmap Understand regulatory requirements and drivers impacting development goals and plans Evaluate product changes and recommend needed process and system changes Develop functional capabilities within the organization by driving innovation and continuous process improvements Collaborate with cross-functional teams to define and prioritize the product backlog Refine the product backlog to ensure that it is ready for development Maintain product budget and forecast. Seek to optimize product delivery in the most cost effective manner. Collaborate with technology partners and teams to drive strategic plans for system development, integration and deployment Work with the Project Owners/Managers, Technology Lead, and Scrum Master to ensure that the team is following the hybrid agile methodology and that any issues are addressed in a timely manner Document and/or sign-off on acceptance criteria for user stories Ensure that the product backlog is transparent, visible, and understood by all stakeholders Ensure there is a clear traceability of requirements to deliverables Ensure the product complies with all non-functional requirements Comply with all product delivery controls and procedures Continuously monitor and evaluate the product backlog to ensure that it is meeting stakeholder needs and delivering value Identify scope gaps and missing requirements by acquiring an in-depth understanding of current state capabilities (ie, Legacy system) and future state needs Proactively identify and escalates risks and issues to the leadership team. Monitor vendor performance (where applicable) against statements of work Meet complex business needs in an efficient, flexible, and ever-improving manner Indirectly supervise project team members from across FRM and internal technology teams. May involve direct supervision of individuals or teams within one year. Qualifications: Previous experience as a Product Manager/Owner in a hybrid agile methodology is required Strong understanding of Agile product management methodologies and product development processes Excellent communication, collaboration, and presentation skills Strong interpersonal and influencing skills, including ability to interact effectively with peers, all levels of management, regulators and member firms Ability to work effectively with and lead cross-functional teams Strong analytical and problem-solving skills Demonstrated ability to gather, analyze, and evaluate facts, and prepare and present concise oral and written reports Ability to prioritize and manage multiple tasks and projects simultaneously Ability to work independently in a fast-paced, dynamic environment Must be able to work under deadlines and manage multiple tasks Self-directed; Ability to work both independently with minimal direction or oversight in a team-oriented, collaborative environment Experience working in the financial services industry General securities markets, derivatives knowledge required Strong knowledge in multiple asset classes like equities, interest rates, volatility, commodities, and foreign currencies (Risk Pillar Specific) Experience with central counter-party clearing, settlement of derivatives, financial risk management and regulated capital markets infrastructure Willingness to roll up your sleeves and do whatever is necessary Proficiency using Jira, Confluence, Tableau and Microsoft Office applications Bachelor's degree (or equivalent) in relevant fields including Accounting, Finance, Computer Science, Management Information Systems, Engineering among others MBA, MS or equivalent graduate degree in a relevant field preferred 10+ years of financial risk management experience leading teams and building robust business processes is required 2+ years of product management experience, preferably with Risk Management products and capabilities Demonstrated experience with ensuring effective process change management 10+ years of experience in financial services/regulated capital markets infrastructure. Experience with an exchange, regulator or clearing house preferred
16/04/2024
Full time
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Financial Company is currently seeking a Financial Risk Management Systems Product Manager. Candidate will be responsible for maximizing the value of the Products delivered to our stakeholders by representing business interests, working with our technology teams to determine requirements, creating a product roadmap for development, and prioritizing the work. The Product Owner will work in a hybrid agile methodology collaborating with cross-functional teams. The Product Owner must ensure that the technology teams understand and are aligned with the Product vision and that leadership is kept aware of Product progress and status. Responsibilities: Act as the primary point of contact for stakeholders regarding the product backlog and product development Interact with internal and external stakeholders such as regulators, exchanges and other external parties in explaining Products Elicit, interpret, lead requirement workshop discussions with vendors, stakeholders and/or product owners; assist in the development of backlog items and acceptance criteria Work with internal and external stakeholders to understand their needs and ensure that they are reflected in the product backlog Maintain direct communications with senior and middle management Coordinate preparation of materials for Management Committee, Board of Directors and Regulatory meetings as needed Maintain Product Vision and Roadmap Understand regulatory requirements and drivers impacting development goals and plans Evaluate product changes and recommend needed process and system changes Develop functional capabilities within the organization by driving innovation and continuous process improvements Collaborate with cross-functional teams to define and prioritize the product backlog Refine the product backlog to ensure that it is ready for development Maintain product budget and forecast. Seek to optimize product delivery in the most cost effective manner. Collaborate with technology partners and teams to drive strategic plans for system development, integration and deployment Work with the Project Owners/Managers, Technology Lead, and Scrum Master to ensure that the team is following the hybrid agile methodology and that any issues are addressed in a timely manner Document and/or sign-off on acceptance criteria for user stories Ensure that the product backlog is transparent, visible, and understood by all stakeholders Ensure there is a clear traceability of requirements to deliverables Ensure the product complies with all non-functional requirements Comply with all product delivery controls and procedures Continuously monitor and evaluate the product backlog to ensure that it is meeting stakeholder needs and delivering value Identify scope gaps and missing requirements by acquiring an in-depth understanding of current state capabilities (ie, Legacy system) and future state needs Proactively identify and escalates risks and issues to the leadership team. Monitor vendor performance (where applicable) against statements of work Meet complex business needs in an efficient, flexible, and ever-improving manner Indirectly supervise project team members from across FRM and internal technology teams. May involve direct supervision of individuals or teams within one year. Qualifications: Previous experience as a Product Manager/Owner in a hybrid agile methodology is required Strong understanding of Agile product management methodologies and product development processes Excellent communication, collaboration, and presentation skills Strong interpersonal and influencing skills, including ability to interact effectively with peers, all levels of management, regulators and member firms Ability to work effectively with and lead cross-functional teams Strong analytical and problem-solving skills Demonstrated ability to gather, analyze, and evaluate facts, and prepare and present concise oral and written reports Ability to prioritize and manage multiple tasks and projects simultaneously Ability to work independently in a fast-paced, dynamic environment Must be able to work under deadlines and manage multiple tasks Self-directed; Ability to work both independently with minimal direction or oversight in a team-oriented, collaborative environment Experience working in the financial services industry General securities markets, derivatives knowledge required Strong knowledge in multiple asset classes like equities, interest rates, volatility, commodities, and foreign currencies (Risk Pillar Specific) Experience with central counter-party clearing, settlement of derivatives, financial risk management and regulated capital markets infrastructure Willingness to roll up your sleeves and do whatever is necessary Proficiency using Jira, Confluence, Tableau and Microsoft Office applications Bachelor's degree (or equivalent) in relevant fields including Accounting, Finance, Computer Science, Management Information Systems, Engineering among others MBA, MS or equivalent graduate degree in a relevant field preferred 10+ years of financial risk management experience leading teams and building robust business processes is required 2+ years of product management experience, preferably with Risk Management products and capabilities Demonstrated experience with ensuring effective process change management 10+ years of experience in financial services/regulated capital markets infrastructure. Experience with an exchange, regulator or clearing house preferred
* Position is bonus eligible* Prestigious Financial Institution is currently seeking an Enterprise Monitoring Technical Lead Engineer with strong Splunk experience. Candidate will lead the investigating, planning, and implementing of the enterprise monitoring system, as well as identify areas for improvement, recommend allocation of resources, and work with solution architects to craft an appropriate remediation or enhancement for these systems. Responsibilities: Translate middle and senior management strategic directives into workable technical directives Monitor project status and take remedial action on projects behind schedule and/or over budget Provide subject matter expertise for ongoing support of third-party tools like Splunk Provide expert-level technical mentoring to more junior members of the team Resolve complex support issues in non-production and production environments. Have an understanding of Cloud Native applications running on Kubernetes within AWS and how exposed APIs may be used to monitor them Assist production support and development staff in debugging environment defects using logging monitors and/or APM-related profiling data Create procedural and troubleshooting documentation related to enterprise monitoring systems and the applications they are monitoring Write complex automation scripts using common automation tools, such as Jenkins, Ansible, and Terraform for the installation, configuration, and/or upgrade of monitoring systems. Qualifications: Expert understanding of: Systems administration and change management practices Enterprise monitoring and reporting tools Experience Scripting and/or coding against APIs In-depth knowledge of common used management and monitoring tech Internet/Web based technologies ITIL Best Practices Experience with tech used to support microservices Network technologies AWS log collection such as CloudTrail, CloudWatch, VPC Flow Logs Monitoring and reporting using SNMP CI/CD tools such as Artifactory, Jenkins, and GIT Cloud native applications, including Terraform experience Technologies used to support microservices Encryption technologies (SSL/TLS, PKI Infrastructure management) Security controls as applied to software technologies Bachelor's degree in a related area 10+ years of related experience 10 years experience working in a distributed multi-platform environment. 3 years experience working with cloud native applications 3 years experience managing technical projects Cloud certification in AWS is a plus
16/04/2024
Full time
* Position is bonus eligible* Prestigious Financial Institution is currently seeking an Enterprise Monitoring Technical Lead Engineer with strong Splunk experience. Candidate will lead the investigating, planning, and implementing of the enterprise monitoring system, as well as identify areas for improvement, recommend allocation of resources, and work with solution architects to craft an appropriate remediation or enhancement for these systems. Responsibilities: Translate middle and senior management strategic directives into workable technical directives Monitor project status and take remedial action on projects behind schedule and/or over budget Provide subject matter expertise for ongoing support of third-party tools like Splunk Provide expert-level technical mentoring to more junior members of the team Resolve complex support issues in non-production and production environments. Have an understanding of Cloud Native applications running on Kubernetes within AWS and how exposed APIs may be used to monitor them Assist production support and development staff in debugging environment defects using logging monitors and/or APM-related profiling data Create procedural and troubleshooting documentation related to enterprise monitoring systems and the applications they are monitoring Write complex automation scripts using common automation tools, such as Jenkins, Ansible, and Terraform for the installation, configuration, and/or upgrade of monitoring systems. Qualifications: Expert understanding of: Systems administration and change management practices Enterprise monitoring and reporting tools Experience Scripting and/or coding against APIs In-depth knowledge of common used management and monitoring tech Internet/Web based technologies ITIL Best Practices Experience with tech used to support microservices Network technologies AWS log collection such as CloudTrail, CloudWatch, VPC Flow Logs Monitoring and reporting using SNMP CI/CD tools such as Artifactory, Jenkins, and GIT Cloud native applications, including Terraform experience Technologies used to support microservices Encryption technologies (SSL/TLS, PKI Infrastructure management) Security controls as applied to software technologies Bachelor's degree in a related area 10+ years of related experience 10 years experience working in a distributed multi-platform environment. 3 years experience working with cloud native applications 3 years experience managing technical projects Cloud certification in AWS is a plus
Building Performance Engineer Location: South London (Hybrid) Salary: Negotiable Dependent on experience About the Role: Seeking a Building Performance Engineer to optimize Building Management System (BMS) operations and ensure compliance with Net Zero Carbon (NZC) commitments and NABERS standards. Responsibilities include implementing BMS optimization recommendations, conducting system audits, and supporting smart building system integration. Key Responsibilities: Implement BMS optimization recommendations. Ensure compliance with NABERS standards. Support smart building system integration. Identify and implement energy-saving interventions. Conduct system audits and provide actionable recommendations. Monitor equipment performance and address deviations. Maintain building design operations and manage change control processes. Standardize BMS Asset Hierarchy and monitor user access. Provide technical guidance on data integration and reliability-centered maintenance. Act as the super-user for relevant platforms and support infrastructure migration. Candidate Requirements: Relevant qualifications in BMS/automated controls and electrical engineering. Experience in BMS maintenance, repair, and installation. Familiarity with energy management principles and smart systems. Proficiency in fault finding, report writing, and reliability engineering techniques. Strong communication skills and commitment to safety standards. This is an urgent hire so we are looking to interview for this ASAP. If interested please email your CV to (see below)
16/04/2024
Full time
Building Performance Engineer Location: South London (Hybrid) Salary: Negotiable Dependent on experience About the Role: Seeking a Building Performance Engineer to optimize Building Management System (BMS) operations and ensure compliance with Net Zero Carbon (NZC) commitments and NABERS standards. Responsibilities include implementing BMS optimization recommendations, conducting system audits, and supporting smart building system integration. Key Responsibilities: Implement BMS optimization recommendations. Ensure compliance with NABERS standards. Support smart building system integration. Identify and implement energy-saving interventions. Conduct system audits and provide actionable recommendations. Monitor equipment performance and address deviations. Maintain building design operations and manage change control processes. Standardize BMS Asset Hierarchy and monitor user access. Provide technical guidance on data integration and reliability-centered maintenance. Act as the super-user for relevant platforms and support infrastructure migration. Candidate Requirements: Relevant qualifications in BMS/automated controls and electrical engineering. Experience in BMS maintenance, repair, and installation. Familiarity with energy management principles and smart systems. Proficiency in fault finding, report writing, and reliability engineering techniques. Strong communication skills and commitment to safety standards. This is an urgent hire so we are looking to interview for this ASAP. If interested please email your CV to (see below)
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
16/04/2024
Project-based
Lead Electrical CAD Engineer Derby -Hybrid Contract Outside IR 35 Key Skills and Experience Qualified to degree level or equivalent in Electrical Engineering or a related discipline with at least 8 years post graduate industry experience or has relevant work experience. Chartered Engineer (or working towards Chartership) would be ideal. The candidate must have experience setting up Electrical, Controls, and Instrumentation CAD environments, including engagement with relevant stakeholders to communicate IT related requirements, CAD tool selection, project defaults set-up, 2D and 3D content creation, attribution setting up, CAD templates creation, in accordance with project and industry standards and best practice. The candidate must be a strong administrator of EC&I CAD production environments including the provision of technical support, coordinated system replacements and upgrades, the maintenance of 2D and 3D content libraries, maintaining the data model, PLM integration, provision of training, engagement with IT and CAD system vendor, etc. Experience identifying opportunities to enhance efficiency ie, accessing the tools' API to script/code modifications, automations etc. would be highly beneficial. Proficient with as many as possible of the following CAD tools: SIEMENS NX Diagramming and Electrical Routing, Autodesk AutoCAD Electrical, Autodesk REVIT (MEP Tools), AVEVA PDMS or E3D, CAESAR, Proficient in the use of at least one of the following PLM tools: SIEMENS Teamcenter Autodesk VAULT DM or 3D EXPERIENCE Proficient in the use of the following BIM Coordination tools: Autodesk Navisworks Simulate Autodesk Navisworks Manage Proficient in the use of the following productivity tools: MS Office (Outlook, OneDrive, SharePoint, Word, Excel, PowerPoint, OneNote, Teams, etc ) Proficient in the production of SLDs, EC&I 3D models, general arrangement and layout drawings, isometrics, cable schedules, BoMs, etc. The candidate must be ready to support other CAD activities if and when required ie, HVAC, Process, Component Definition, CS&A, etc. The candidate must be able to lead a section of CAD Engineers (8x approx.), including line management, tasks planning and distribution, managing the team's development, and keep a good line of communications with team and CAD/BIM manager. The candidate must be able to delegate and solve problems independently. The candidate must have experience writing and maintaining technical documentation such as CAD strategy, BIM Execution Plans, Exchange Information Requirements, CAD standards, manuals, guidance, best practice, etc. Job Description Line Manage effectively a section of 8x approx. CAD Engineers. This amount could increase for short periods of time. Plan the section's activity in coordination with client departments, CAD/BIM manager and PMO. Develop the required CAD environment, processes, standards, and content necessary for the production of SLDs, 3D models, general arrangement drawings, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Lead the production of SLDs, 3D models, layout drawings, isometrics, cable schedules, manufacturing and assembly drawings, data (ie, BoMs). Provide with technical support to junior CAD Engineers and to the wider project team. Carry out quality assurance checks and reports as well as review and acceptance support for CAD information. Support other CAD activities if and when required (ie, component definition, HVAC, Process, Civils, Structures, and Architecture) The above according to agreed timescales, to the highest quality, and in accordance to industry, and project standards.
SOFTWARE DEFINED NETWORK ENGINEER - STOKE ON TRENT Competitive Salary Location: Stoke on Trent 5 days a week onsite Role Overview: We are currently seeking a skilled Software Defined Network Engineer to join our client's growing team in Stoke on Trent. You'll be responsible for designing, implementing, and managing VMware NSX-T infrastructure to ensure network reliability, security, and performance. Responsibilities: Designing/implementing/managing VMware NSX-T solutions, including virtualised network infrastructure/micro-segmentation. Deploying/configuring/maintaining NSX-T components according to best practices. Integrating NSX-T with existing network infrastructure and automating tasks using Scripting tools. Troubleshooting network issues/optimising performance. Implementing security controls/compliance requirements. Providing documentation/training on NSX-T technologies. Requirements: Bachelor's degree in computer science or related field. Experience with VMware NSX-T in enterprise environments. Strong networking skills and understanding of TCP/IP, VLANs, routing, etc. Proficiency in Scripting and automation tools. Excellent problem-solving and communication skills. UK Security Check (SC) clearance required (or be eligible for clearance) Please apply if this sounds like you.
15/04/2024
Full time
SOFTWARE DEFINED NETWORK ENGINEER - STOKE ON TRENT Competitive Salary Location: Stoke on Trent 5 days a week onsite Role Overview: We are currently seeking a skilled Software Defined Network Engineer to join our client's growing team in Stoke on Trent. You'll be responsible for designing, implementing, and managing VMware NSX-T infrastructure to ensure network reliability, security, and performance. Responsibilities: Designing/implementing/managing VMware NSX-T solutions, including virtualised network infrastructure/micro-segmentation. Deploying/configuring/maintaining NSX-T components according to best practices. Integrating NSX-T with existing network infrastructure and automating tasks using Scripting tools. Troubleshooting network issues/optimising performance. Implementing security controls/compliance requirements. Providing documentation/training on NSX-T technologies. Requirements: Bachelor's degree in computer science or related field. Experience with VMware NSX-T in enterprise environments. Strong networking skills and understanding of TCP/IP, VLANs, routing, etc. Proficiency in Scripting and automation tools. Excellent problem-solving and communication skills. UK Security Check (SC) clearance required (or be eligible for clearance) Please apply if this sounds like you.
DV Cleared SIEM/Incident SME Location: Northallerton/Corsham/Portsmouth Duration: 6 - 12 Months Rate to SSC: Market Rate MUST BE PAYE THROUGH UMBRELLA Role Description: The Cyber Defence Analyst will join a growing security team responsible for designing, delivering and maintaining operational cybersecurity capabilities. Conducting pro-active, risk-based, protective monitoring on priority C4IS/networks to identify internal and external cyber-threats/attacks. This position involves a broad range of skills, including the development and mentoring of Junior Analysts, monitoring networks to actively remediate unauthorised activities. Your role Develop and integrate security event monitoring and incident management services. Respond to security incidents as they occur as part of an incident response team. Implement metrics and dashboards to give visibility of the Enterprise infrastructure. Use of the SOAR platform to assist with playbook automation and case management capabilities to streamline team processes and tools. Produce documentation to ensure the repeatability and standardisation of security operating procedures. Develop additional investigative methods using the SOC's software toolsets to enhance recognition opportunities for specific analysis. Maintain a baseline of system security according to latest threat intelligence and evolving trends. Participate in root cause analysis of incidents in conjunction with engineers across the enterprise. Provide Subject Matter Expertise (SME) on a broad range of information security standards and best practices. Offer strategic and tactical security guidance including valuation requirement of technical controls. Be part of the CRM process Liaise with the SOC engineers to maintain up-to-date dashboards of security alerts, to allow the organisation to better respond to an incident. Document, validate and create operational processes and procedures to help develop the SOC. Assist in identifying, prioritising, and coordinating the protection of critical cyber defence infrastructure and key resources. Build, install, configure, and test dedicated cyber defence hardware. Support Junior Analysts to manage SOC systems. Previous experience of Enterprise ICS/network architectures and technologies Experience and knowledge of SIEM solutions; having the ability to identify use cases and their creation, their deployment and tuning. Experience as a mentor/coach to Junior Analysts Your profile Previous experience of utilising the MITRE ATT&CK and Cyber Kill Chain frameworks Skilled in maintaining Microsoft directory services. Skilled in using virtualisation software. Knowledge of key security frameworks (eg ISO, NIST 800-53, 800-171, 800-172, C2M2) Excellent communication skills Experience of writing Defence/Government documentation Desirable Qualifications: Broad Spectrum Cyber Course (SANS SEC401 or SEC501 or equivalent) SIEM Design, Architecture and Analyst Course (SANS SEC455 or SEC555 or equivalent) Advanced Analyst Course (SANS SEC503 or equivalent)
15/04/2024
Project-based
DV Cleared SIEM/Incident SME Location: Northallerton/Corsham/Portsmouth Duration: 6 - 12 Months Rate to SSC: Market Rate MUST BE PAYE THROUGH UMBRELLA Role Description: The Cyber Defence Analyst will join a growing security team responsible for designing, delivering and maintaining operational cybersecurity capabilities. Conducting pro-active, risk-based, protective monitoring on priority C4IS/networks to identify internal and external cyber-threats/attacks. This position involves a broad range of skills, including the development and mentoring of Junior Analysts, monitoring networks to actively remediate unauthorised activities. Your role Develop and integrate security event monitoring and incident management services. Respond to security incidents as they occur as part of an incident response team. Implement metrics and dashboards to give visibility of the Enterprise infrastructure. Use of the SOAR platform to assist with playbook automation and case management capabilities to streamline team processes and tools. Produce documentation to ensure the repeatability and standardisation of security operating procedures. Develop additional investigative methods using the SOC's software toolsets to enhance recognition opportunities for specific analysis. Maintain a baseline of system security according to latest threat intelligence and evolving trends. Participate in root cause analysis of incidents in conjunction with engineers across the enterprise. Provide Subject Matter Expertise (SME) on a broad range of information security standards and best practices. Offer strategic and tactical security guidance including valuation requirement of technical controls. Be part of the CRM process Liaise with the SOC engineers to maintain up-to-date dashboards of security alerts, to allow the organisation to better respond to an incident. Document, validate and create operational processes and procedures to help develop the SOC. Assist in identifying, prioritising, and coordinating the protection of critical cyber defence infrastructure and key resources. Build, install, configure, and test dedicated cyber defence hardware. Support Junior Analysts to manage SOC systems. Previous experience of Enterprise ICS/network architectures and technologies Experience and knowledge of SIEM solutions; having the ability to identify use cases and their creation, their deployment and tuning. Experience as a mentor/coach to Junior Analysts Your profile Previous experience of utilising the MITRE ATT&CK and Cyber Kill Chain frameworks Skilled in maintaining Microsoft directory services. Skilled in using virtualisation software. Knowledge of key security frameworks (eg ISO, NIST 800-53, 800-171, 800-172, C2M2) Excellent communication skills Experience of writing Defence/Government documentation Desirable Qualifications: Broad Spectrum Cyber Course (SANS SEC401 or SEC501 or equivalent) SIEM Design, Architecture and Analyst Course (SANS SEC455 or SEC555 or equivalent) Advanced Analyst Course (SANS SEC503 or equivalent)
You would be joining a leading automation services provider with a reputation for excellence and innovation. They help their customers to automate any manufacturing process, from simple to complex, across a range of sectors. You will be able to apply your technical engineering background (think of your previous days as a Controls Systems/Automation Engineer within industrial automation ) to ensure your project teams meet their project deadlines without compromising on the quality of solutions to customers. * This role would not be the best fit if you do not have industrial automation experience - this is an essential skill and those who are more in the IT sector/general PM experience will not be able to be considered * Whether it's Pharmaceutical, Chemical, Energy, Aerospace or Logistics, they have the expertise and experience to handle it. You will be joining a small team of Project Managers to manage the full project life cycle from initial request to the final handover. You will be responsible for: Responsible for specifying and delivering projects to meet customer requirements and expectations. You are slick in planning and controlling milestones, risk management, internal and external reporting, supplier management and quality control. You are a team player who is decisive, adaptable and accountable whilst having a genuine interest in actively developing those who report to you. This role will require you to work in their Bristol office for three days a week, so you must be willing to relocate or already be within a commutable distance of Bristol. This is a great opportunity to join a dynamic and successful company that values its people and rewards their performance. You will receive a competitive salary of up to £65,000 per annum dependent on experience plus benefits including 25 days holiday entitlement and private medical. *Candidates requiring sponsorship or not already a full time resident of the UK will not be eligible to apply* To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
15/04/2024
Full time
You would be joining a leading automation services provider with a reputation for excellence and innovation. They help their customers to automate any manufacturing process, from simple to complex, across a range of sectors. You will be able to apply your technical engineering background (think of your previous days as a Controls Systems/Automation Engineer within industrial automation ) to ensure your project teams meet their project deadlines without compromising on the quality of solutions to customers. * This role would not be the best fit if you do not have industrial automation experience - this is an essential skill and those who are more in the IT sector/general PM experience will not be able to be considered * Whether it's Pharmaceutical, Chemical, Energy, Aerospace or Logistics, they have the expertise and experience to handle it. You will be joining a small team of Project Managers to manage the full project life cycle from initial request to the final handover. You will be responsible for: Responsible for specifying and delivering projects to meet customer requirements and expectations. You are slick in planning and controlling milestones, risk management, internal and external reporting, supplier management and quality control. You are a team player who is decisive, adaptable and accountable whilst having a genuine interest in actively developing those who report to you. This role will require you to work in their Bristol office for three days a week, so you must be willing to relocate or already be within a commutable distance of Bristol. This is a great opportunity to join a dynamic and successful company that values its people and rewards their performance. You will receive a competitive salary of up to £65,000 per annum dependent on experience plus benefits including 25 days holiday entitlement and private medical. *Candidates requiring sponsorship or not already a full time resident of the UK will not be eligible to apply* To find out more about Progressive Recruitment please visit our website Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
GMP Compliance Specialist (m/f/d) - GMP / Pharma / Cornerstone/ English / German Project: For our customer a big pharmaceutical company in Basel we are looking for a highly qualified GMP Compliance Specialist (m/f/d). Background: In Roche's Pharmaceutical Research and Early Development organization (pRED), we make transformative medicines for patients in order to tackle some of the world's toughest unmet healthcare needs. At pRED, we are united by our mission to transform science into medicine. Together, we create a culture defined by curiosity, responsibility and humility, where our talented people are empowered and inspired to bring forward extraordinary life-changing innovation at speed. This position is located in Preclinical Chemistry, Manufacturing, and Controls (pCMC), a department within the Small Molecule Research organization in pRED Therapeutic Modalities (TMo), where we pave, in a diverse, ambitious and innovative environment, the path to bring drug candidates from early research into development. We collaborate actively with our discovery and development partners functions providing cutting-edge technologies and scientific excellence to transform molecules into future medicines. We are CMC experts and build our strength on a broad diversity of technical expertise in chemistry, formulation design, material science and analytical chemistry, delivering and innovating in the space of small molecules, peptides and nucleic acid-based medicines. The perfect candidate: You have a Bachelor or equivalent and/or higher degree in chemistry, biology or pharmaceutical sciences or operational experience in a GMP environment within the pharmaceutical industry. Experience in synthetic molecule manufacturing and/or quality control, as well as knowledge of GMP regulations (eg, ICH Guidelines) and principles of quality systems is a plus. You are fluent in German and have good verbal and written communication skills in English. You have a detail-oriented and analytical mindset with the ability to identify potential deficiencies, propose solutions, and effectively interpret and apply regulatory requirements. You demonstrate excellent communication skills and the ability to collaborate efficiently with interdisciplinary teams in a dynamic environment. You appreciate being empowered to make decisions in your own field of expertise and actively seek feedback from others. Tasks & Responsibilities: . Management of local and global compliance processes like GMP training, archiving, quality risk management, handling of multisite and local impact assessments . Being an expert and first level support for relevant quality systems (eg Cornerstone, Veeva OneQMS, QualityDocs, QRM,) . Managing changes and deviations, as well as corrective and preventive actions in consultation with QA . Provide expert support to monitor, update, and adapt the GMP-relevant document landscape within pCMC . Participating in the preparation and coordination of internal and health authority audits, as well as supporting the timely implementation of inspection findings . Collaborating with team members in a role based working environment, as well as building and growing relationships with customers and partners across functional boundaries Must Haves: . Bachelor or equivalent and/or higher degree in chemistry, biology or pharmaceutical sciences . Operational experience in a GMP environment within the pharmaceutical industry . MS Office/standard Google applications . Fluent in German, good verbal and written communication skills in English . Soft skills: detail-oriented and analytical mindset; ability to identify potential deficiencies, propose solutions, and effectively interpret and apply regulatory requirements; excellent communication skills; ability to collaborate efficiently with interdisciplinary teams in a dynamic environment. Nice to have: . Experience in synthetic molecule manufacturing and/or quality control, as well as knowledge of GMP regulations (eg, ICH Guidelines) and principles of quality systems is a plus. Reference Nr.: 923376TP Role: GMP Compliance Specialist (m/f/d) Industrie: Pharma Workplace: Basel Pensum: 80-100% Start: 01.06.2024 Duration: 12Months Deadline :21.06.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us : ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
15/04/2024
Project-based
GMP Compliance Specialist (m/f/d) - GMP / Pharma / Cornerstone/ English / German Project: For our customer a big pharmaceutical company in Basel we are looking for a highly qualified GMP Compliance Specialist (m/f/d). Background: In Roche's Pharmaceutical Research and Early Development organization (pRED), we make transformative medicines for patients in order to tackle some of the world's toughest unmet healthcare needs. At pRED, we are united by our mission to transform science into medicine. Together, we create a culture defined by curiosity, responsibility and humility, where our talented people are empowered and inspired to bring forward extraordinary life-changing innovation at speed. This position is located in Preclinical Chemistry, Manufacturing, and Controls (pCMC), a department within the Small Molecule Research organization in pRED Therapeutic Modalities (TMo), where we pave, in a diverse, ambitious and innovative environment, the path to bring drug candidates from early research into development. We collaborate actively with our discovery and development partners functions providing cutting-edge technologies and scientific excellence to transform molecules into future medicines. We are CMC experts and build our strength on a broad diversity of technical expertise in chemistry, formulation design, material science and analytical chemistry, delivering and innovating in the space of small molecules, peptides and nucleic acid-based medicines. The perfect candidate: You have a Bachelor or equivalent and/or higher degree in chemistry, biology or pharmaceutical sciences or operational experience in a GMP environment within the pharmaceutical industry. Experience in synthetic molecule manufacturing and/or quality control, as well as knowledge of GMP regulations (eg, ICH Guidelines) and principles of quality systems is a plus. You are fluent in German and have good verbal and written communication skills in English. You have a detail-oriented and analytical mindset with the ability to identify potential deficiencies, propose solutions, and effectively interpret and apply regulatory requirements. You demonstrate excellent communication skills and the ability to collaborate efficiently with interdisciplinary teams in a dynamic environment. You appreciate being empowered to make decisions in your own field of expertise and actively seek feedback from others. Tasks & Responsibilities: . Management of local and global compliance processes like GMP training, archiving, quality risk management, handling of multisite and local impact assessments . Being an expert and first level support for relevant quality systems (eg Cornerstone, Veeva OneQMS, QualityDocs, QRM,) . Managing changes and deviations, as well as corrective and preventive actions in consultation with QA . Provide expert support to monitor, update, and adapt the GMP-relevant document landscape within pCMC . Participating in the preparation and coordination of internal and health authority audits, as well as supporting the timely implementation of inspection findings . Collaborating with team members in a role based working environment, as well as building and growing relationships with customers and partners across functional boundaries Must Haves: . Bachelor or equivalent and/or higher degree in chemistry, biology or pharmaceutical sciences . Operational experience in a GMP environment within the pharmaceutical industry . MS Office/standard Google applications . Fluent in German, good verbal and written communication skills in English . Soft skills: detail-oriented and analytical mindset; ability to identify potential deficiencies, propose solutions, and effectively interpret and apply regulatory requirements; excellent communication skills; ability to collaborate efficiently with interdisciplinary teams in a dynamic environment. Nice to have: . Experience in synthetic molecule manufacturing and/or quality control, as well as knowledge of GMP regulations (eg, ICH Guidelines) and principles of quality systems is a plus. Reference Nr.: 923376TP Role: GMP Compliance Specialist (m/f/d) Industrie: Pharma Workplace: Basel Pensum: 80-100% Start: 01.06.2024 Duration: 12Months Deadline :21.06.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us : ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.