We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
19/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Computer Futures - London & S.E(Permanent and Contract)
Newcastle Upon Tyne, Tyne And Wear
I'm currently recruiting for an Embedded Software Engineer on behalf of one of my customers in the North East of England. The C++ Embedded Software Engineer will help my customer develop software used in the medical industry. Embedded Software Engineer 3 days remote and 2 days on site Newcastle Key Roles and Responsibilities Developing C++/Linux based applications designed to run on Embedded Devices. Working alongside the technical Lead to assist with architectural design. Lead development sub-projects when needed. Collaborate with other teams/disciplines such as Engineering or Electronics where required. Collaborate and perform peer code reviews. Work with the Software Team Lead, and Software Platform Technical Lead to encourage and foster a culture of code quality within the software team. Key skills Strong C++ development experience Version control, git and good OO skills Embedded Linux application development, for example: Cross compiling, remote debugging g. QML/Qt UI development Embedded Linux OS development, eg Yocto and Buildroot Proven full life cycle capabilities, in particular: design, build, test and maintenance of Embedded software Experience with 'unit' testing in Embedded software Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy
18/04/2024
Full time
I'm currently recruiting for an Embedded Software Engineer on behalf of one of my customers in the North East of England. The C++ Embedded Software Engineer will help my customer develop software used in the medical industry. Embedded Software Engineer 3 days remote and 2 days on site Newcastle Key Roles and Responsibilities Developing C++/Linux based applications designed to run on Embedded Devices. Working alongside the technical Lead to assist with architectural design. Lead development sub-projects when needed. Collaborate with other teams/disciplines such as Engineering or Electronics where required. Collaborate and perform peer code reviews. Work with the Software Team Lead, and Software Platform Technical Lead to encourage and foster a culture of code quality within the software team. Key skills Strong C++ development experience Version control, git and good OO skills Embedded Linux application development, for example: Cross compiling, remote debugging g. QML/Qt UI development Embedded Linux OS development, eg Yocto and Buildroot Proven full life cycle capabilities, in particular: design, build, test and maintenance of Embedded software Experience with 'unit' testing in Embedded software Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Agency in relation to this vacancy
Digital Microelectronic Verification Engineer (f/m/d) -Lab verification/Python/Oscilloscope/logic analyzer/SMU/C/C++/English Project : For our customer in Medical Device industry based in Zurich region we are looking for a highly Digital Microelectronic Verification Engineer (f/m/d) . Background : Research & Development delivers hearing solutions and services for hearing aid wearers, hearing care professionals, and further related people, in the form of hearing devices, accessories, web services, mobile applications, and PC software. Embedded in an international research and development team, you will work on ASIC verification at FPGA and silicon level. Our ASICs are emulated on FPGA systems to be able to verify the integrated IPs against the specification and to validate at system level against the requirements. On those systems an Embedded low level software is also running which needs to be tested for proper functionality. For the verification and validation activity we are looking for a 3+ years experienced and passionate digital microelectronic engineer with focus on verification. Tasks & Responsibilities: * ASIC design verification on FPGA and silicon : o Detail the verification plan according to IC requirements and IC specification o Execute IP block level verification and System level validation on FPGA prior ASIC tape out o Execute IP block level verification and System level validation on ASIC o Report findings and communicate with design house bugs and possible improvements * Test environment: o Develop and implement concepts for continuous testing o Collaborate with SW development team on test environment Must Haves: * University degree in microelectronic engineering or equivalent * 3+ years' experience in lab verification * Passionate about electronic design and technologies * Experience in Python Scripting * Experience in git * Experience with electronic test equipment like Oscilloscope, logic analyzer and SMU * Basic know how in C and C++ to understand and modify Embedded SW * Able to structure tasks, solution-oriented and quality aware * Willing to work in a distributed, diverse collaboration environment * Fluent in oral and written communication skills English Reference Nr.: 923384SDA Role : Digital Microelectronic Verification Engineer Industry : Pharma Workplace : Stäfa Pensum : 100% Start : 01.05.2024 Duration : 12 Deadline : 24.04.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us: ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
17/04/2024
Project-based
Digital Microelectronic Verification Engineer (f/m/d) -Lab verification/Python/Oscilloscope/logic analyzer/SMU/C/C++/English Project : For our customer in Medical Device industry based in Zurich region we are looking for a highly Digital Microelectronic Verification Engineer (f/m/d) . Background : Research & Development delivers hearing solutions and services for hearing aid wearers, hearing care professionals, and further related people, in the form of hearing devices, accessories, web services, mobile applications, and PC software. Embedded in an international research and development team, you will work on ASIC verification at FPGA and silicon level. Our ASICs are emulated on FPGA systems to be able to verify the integrated IPs against the specification and to validate at system level against the requirements. On those systems an Embedded low level software is also running which needs to be tested for proper functionality. For the verification and validation activity we are looking for a 3+ years experienced and passionate digital microelectronic engineer with focus on verification. Tasks & Responsibilities: * ASIC design verification on FPGA and silicon : o Detail the verification plan according to IC requirements and IC specification o Execute IP block level verification and System level validation on FPGA prior ASIC tape out o Execute IP block level verification and System level validation on ASIC o Report findings and communicate with design house bugs and possible improvements * Test environment: o Develop and implement concepts for continuous testing o Collaborate with SW development team on test environment Must Haves: * University degree in microelectronic engineering or equivalent * 3+ years' experience in lab verification * Passionate about electronic design and technologies * Experience in Python Scripting * Experience in git * Experience with electronic test equipment like Oscilloscope, logic analyzer and SMU * Basic know how in C and C++ to understand and modify Embedded SW * Able to structure tasks, solution-oriented and quality aware * Willing to work in a distributed, diverse collaboration environment * Fluent in oral and written communication skills English Reference Nr.: 923384SDA Role : Digital Microelectronic Verification Engineer Industry : Pharma Workplace : Stäfa Pensum : 100% Start : 01.05.2024 Duration : 12 Deadline : 24.04.2024 If you are interested in this position, please send us your complete dossier via the link in this advertisement. About us: ITech Consult is an ISO 9001:2015 certified Swiss company with offices in Germany and Ireland. ITech Consult specialises in the placement of highly qualified candidates for recruitment in the fields of IT, Life Science & Engineering. We offer staff leasing & payroll services. For our candidates this is free of charge, also for Payroll we do not charge you any additional fees.
A global medical device company are looking for a R&D Process Development Engineer to join their Research and Development team on a contract basis. Familiarity with processes associated with biomaterial coating is required. The role will involve Laboratory Work, design experiments, analysing data, and optimizing processes to meet performance and regulatory requirements. You'll be part of a cross-functional collaboration. Working closely with a diverse team of scientists, design engineers, process engineers and other functions to ensure project alignment with goals and milestones. You will also need to complete documentation, maintain comprehensive records, documentation, and reports. The role will also involve Project Management. Taking ownership of assigned tasks within projects, managing task specific timelines, budgets effectively. You will work closely with vendors to ensure that the processes are compliant with regulatory requirements and that costs and timelines are maintain. Essential skills: Biomaterial coating experience, eg Chemical Vapour Deposition, Physical Vapour Deposition, Dip coating Experience working with external vendors High level knowledge of the processes Desirable skills: Combination devices experience Project management experience The start date is for ASAP. The initial contract length is for 12 months (there will be options to extend). The role is based in Limerick and can be done mostly remotely. You will only need to come onsite every other week. The rate is €55 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
15/04/2024
Project-based
A global medical device company are looking for a R&D Process Development Engineer to join their Research and Development team on a contract basis. Familiarity with processes associated with biomaterial coating is required. The role will involve Laboratory Work, design experiments, analysing data, and optimizing processes to meet performance and regulatory requirements. You'll be part of a cross-functional collaboration. Working closely with a diverse team of scientists, design engineers, process engineers and other functions to ensure project alignment with goals and milestones. You will also need to complete documentation, maintain comprehensive records, documentation, and reports. The role will also involve Project Management. Taking ownership of assigned tasks within projects, managing task specific timelines, budgets effectively. You will work closely with vendors to ensure that the processes are compliant with regulatory requirements and that costs and timelines are maintain. Essential skills: Biomaterial coating experience, eg Chemical Vapour Deposition, Physical Vapour Deposition, Dip coating Experience working with external vendors High level knowledge of the processes Desirable skills: Combination devices experience Project management experience The start date is for ASAP. The initial contract length is for 12 months (there will be options to extend). The role is based in Limerick and can be done mostly remotely. You will only need to come onsite every other week. The rate is €55 per hour, depending on experience, if you have any expenses please let me know and I can factor that into the rate for you. Please visit our website to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. Real Staffing, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy| Registered office | London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales