LA International Computer Consultants Ltd
Aldershot, Hampshire
We are looking for a Software engineering lead who has experience with development in C/C++ this role will be working onsite in Aldershot full time. We require an active SC clearance (UK Eyes only) Inside IR35 A successful candidate will have: * Experience of working in all aspects of the software life cycle. * Experience of working in an Agile development environment using both Scrum and Kanban. * The ability to produce high quality software and software related documentation with minimal requirement for rework when tasks are submitted for independent review. * The ability to provide reasoned detailed 3-point estimates with corresponding assessments of dependencies, assumptions, and risks * Experience of both functional and Object Oriented (OO) Design engineering. * The ability to conduct design and code reviews and unit test inspections. * Knowledge of development in C/C++ on Linux. to be considered please submit an up-to-date CV. Due to the nature and urgency of this post, candidates holding or who have held high level security clearance in the past are most welcome to apply. Please note successful applicants will be required to be security cleared prior to appointment which can take up to a minimum 10 weeks. LA International is a HMG approved ICT Recruitment and Project Solutions Consultancy, operating globally from the largest single site in the UK as an IT Consultancy or as an Employment Business & Agency depending upon the precise nature of the work, for security cleared jobs or non-clearance vacancies, LA International welcome applications from all sections of the community and from people with diverse experience and backgrounds. Award Winning LA International, winner of the Recruiter Awards for Excellence, Best IT Recruitment Company, Best Public Sector Recruitment Company and overall Gold Award winner, has now secured the most prestigious business award that any business can receive, The Queens Award for Enterprise: International Trade, for the second consecutive period.
25/04/2024
Project-based
We are looking for a Software engineering lead who has experience with development in C/C++ this role will be working onsite in Aldershot full time. We require an active SC clearance (UK Eyes only) Inside IR35 A successful candidate will have: * Experience of working in all aspects of the software life cycle. * Experience of working in an Agile development environment using both Scrum and Kanban. * The ability to produce high quality software and software related documentation with minimal requirement for rework when tasks are submitted for independent review. * The ability to provide reasoned detailed 3-point estimates with corresponding assessments of dependencies, assumptions, and risks * Experience of both functional and Object Oriented (OO) Design engineering. * The ability to conduct design and code reviews and unit test inspections. * Knowledge of development in C/C++ on Linux. to be considered please submit an up-to-date CV. Due to the nature and urgency of this post, candidates holding or who have held high level security clearance in the past are most welcome to apply. Please note successful applicants will be required to be security cleared prior to appointment which can take up to a minimum 10 weeks. LA International is a HMG approved ICT Recruitment and Project Solutions Consultancy, operating globally from the largest single site in the UK as an IT Consultancy or as an Employment Business & Agency depending upon the precise nature of the work, for security cleared jobs or non-clearance vacancies, LA International welcome applications from all sections of the community and from people with diverse experience and backgrounds. Award Winning LA International, winner of the Recruiter Awards for Excellence, Best IT Recruitment Company, Best Public Sector Recruitment Company and overall Gold Award winner, has now secured the most prestigious business award that any business can receive, The Queens Award for Enterprise: International Trade, for the second consecutive period.
Senior Security Systems Design Engineer I am looking to hire an experienced (3-5 Years) Senior Security Systems Design Engineer on behalf of a prestigious client of mine, on a permanent basis. Our clients are looking for a motivated individual who will have experience of, and the continued desire to, see their designs through from Design to Construction, Commissioning and handover etc. Candidates wishing to apply for this position will be heavily experienced in the Technical Design Space (Electrical and Mechanical Requirements) and have the capabilities, of successfully grasping the fundamentals of a new development ie Hotel, Stadium, Airport - It goes without saying, it is imperative that the successful candidate has Practical experience! To be considered for this position you will be well versed with the RIBA process and the following Softwares ; AutoCAD, REVIT, Bluebeam Revu . You will be responsible for and able to demonstrate (not limited to), Project Planning, client briefing, developing design, task quality control procedures, resource planning and working within budgets. It is essential that you will have previously designed some or all of the following; Video Surveillance, Access Control, Intruder detection, Duress, Intercom, Control Rooms, Integrated Security Management Platforms, Gates/Barriers, Turnstiles, Car Parking Management, Key Management or Drone detection and will have previously monitored both on and off-site construction works and testing of electronic security systems. You will be a sleeves-rolled-up individual, with excellent attention to detail, who is able to deliver in various Architectural Projects. Salary: Up to £67,000 per annum Location: On site in London 3 days a week, the remainder working remotely. (Probation period fully on site)
25/04/2024
Full time
Senior Security Systems Design Engineer I am looking to hire an experienced (3-5 Years) Senior Security Systems Design Engineer on behalf of a prestigious client of mine, on a permanent basis. Our clients are looking for a motivated individual who will have experience of, and the continued desire to, see their designs through from Design to Construction, Commissioning and handover etc. Candidates wishing to apply for this position will be heavily experienced in the Technical Design Space (Electrical and Mechanical Requirements) and have the capabilities, of successfully grasping the fundamentals of a new development ie Hotel, Stadium, Airport - It goes without saying, it is imperative that the successful candidate has Practical experience! To be considered for this position you will be well versed with the RIBA process and the following Softwares ; AutoCAD, REVIT, Bluebeam Revu . You will be responsible for and able to demonstrate (not limited to), Project Planning, client briefing, developing design, task quality control procedures, resource planning and working within budgets. It is essential that you will have previously designed some or all of the following; Video Surveillance, Access Control, Intruder detection, Duress, Intercom, Control Rooms, Integrated Security Management Platforms, Gates/Barriers, Turnstiles, Car Parking Management, Key Management or Drone detection and will have previously monitored both on and off-site construction works and testing of electronic security systems. You will be a sleeves-rolled-up individual, with excellent attention to detail, who is able to deliver in various Architectural Projects. Salary: Up to £67,000 per annum Location: On site in London 3 days a week, the remainder working remotely. (Probation period fully on site)
Stress Engineer Stress; FEA; Structures; Materials Science; Mechanical Engineering £35,000 - £55,000 + excellent Benefits. Kidderminster (Hybrid available) A cutting-edge Aerospace & Defence organisation have a unique opportunity for a Stress Engineer to join their Design team. The design department designs new and modified rocket motors and related systems. Analysis of rocket motor designs, including: Ballistic performance prediction and modelling, propellant charge and hardware stress analysis, and the provision of documentation service. ESSENTIAL DUTIES & REPONSIBILITIES - Stress Engineer Technical Responsibilities Analysis of new and existing rocket motor systems such as motor hardware and propellant charge structural and thermal analysis using FEA software. The use of various software and programming techniques, including: Abaqus, Altair-Hyperworks, Fortran and Matlab. Rheological analysis of material testing results and providing advice to the technical community for validation and verification of FEA models. Development of motor structural test plans and involvement in the delivery and assessment of the structural testing results. Responsible as the structural performance technical authority aspects of assigned projects, including supporting project customer meetings, project investigations, design reviews, and corresponding customer stress engineers. Deliver key project documentation including, structural analysis and structural test plans and reports and structural design records. EXPERIENCE & BACKGROUND - Stress Engineer Educated to degree level in an engineering discipline such as Mechanical, Aerospace or Structural or another related discipline such as Material Science. Material science knowledge Use of ABAQUS software in an professional or academic environment Experience with CAD modelling
25/04/2024
Full time
Stress Engineer Stress; FEA; Structures; Materials Science; Mechanical Engineering £35,000 - £55,000 + excellent Benefits. Kidderminster (Hybrid available) A cutting-edge Aerospace & Defence organisation have a unique opportunity for a Stress Engineer to join their Design team. The design department designs new and modified rocket motors and related systems. Analysis of rocket motor designs, including: Ballistic performance prediction and modelling, propellant charge and hardware stress analysis, and the provision of documentation service. ESSENTIAL DUTIES & REPONSIBILITIES - Stress Engineer Technical Responsibilities Analysis of new and existing rocket motor systems such as motor hardware and propellant charge structural and thermal analysis using FEA software. The use of various software and programming techniques, including: Abaqus, Altair-Hyperworks, Fortran and Matlab. Rheological analysis of material testing results and providing advice to the technical community for validation and verification of FEA models. Development of motor structural test plans and involvement in the delivery and assessment of the structural testing results. Responsible as the structural performance technical authority aspects of assigned projects, including supporting project customer meetings, project investigations, design reviews, and corresponding customer stress engineers. Deliver key project documentation including, structural analysis and structural test plans and reports and structural design records. EXPERIENCE & BACKGROUND - Stress Engineer Educated to degree level in an engineering discipline such as Mechanical, Aerospace or Structural or another related discipline such as Material Science. Material science knowledge Use of ABAQUS software in an professional or academic environment Experience with CAD modelling
My consulting client is looking for a Saviynt Engineer to join an established IAM/IGA programme. Role: Assist with the development and integration of applications. Post-design configurations, advanced debugging and troubleshooting of issues, including interacting with technology vendors. Participate in requirements gathering, solution design and documentation Software testing On boarded applications in security system and created endpoints and connections and designed custom workflows This is a remote role. 6-12 months + extensions. Outside IR35 at £450-500 per day (experience dependent). If you are available please apply with an updated CV for a call! Lawrence Harvey is acting as an Employment Business in regards to this position.
25/04/2024
Project-based
My consulting client is looking for a Saviynt Engineer to join an established IAM/IGA programme. Role: Assist with the development and integration of applications. Post-design configurations, advanced debugging and troubleshooting of issues, including interacting with technology vendors. Participate in requirements gathering, solution design and documentation Software testing On boarded applications in security system and created endpoints and connections and designed custom workflows This is a remote role. 6-12 months + extensions. Outside IR35 at £450-500 per day (experience dependent). If you are available please apply with an updated CV for a call! Lawrence Harvey is acting as an Employment Business in regards to this position.
Senior .NET Engineer Contract 11 Months Limerick. My client a leader in their industry is in urgent need of a talented and experienced Senior .NET Engineer to join them on a contract basis for 11 months. Candidates will be expected to develop technical solutions to meet business requirements. You will build Microsoft Stack E-commerce software on an enterprise scale, test, and Deploy new features rapidly with the highest quality. Work in an Agile, TDD, XP environment to collaborate with your team and across a giant organisation. You will review/Develop Technical Stories. Write great software to build business features and participate in Code reviews. Work closely with team lead, architects and other peer team members in software development. Successful candidates will have the ability to apply extensive knowledge of application programming and analysis. You will be proven experience in software development methodologies. Excellent practical and theoretical knowledge of ASP.NET stack technologies - You will have experience with .NETCore, C#, MVC, Web API, Entity Framework, Sql Server, noSQL database and Javascript, especially Angular. You will have broad knowledge of application programming and procedures to tackle complex problems.Familiar with distributed systems, messaging technologies and cloud based systems including microservice and SOA-based architecture and experience in working with an Agile/Scrum. If this role sounds of interest then drop me a CV so that we can speak in more detail.
25/04/2024
Project-based
Senior .NET Engineer Contract 11 Months Limerick. My client a leader in their industry is in urgent need of a talented and experienced Senior .NET Engineer to join them on a contract basis for 11 months. Candidates will be expected to develop technical solutions to meet business requirements. You will build Microsoft Stack E-commerce software on an enterprise scale, test, and Deploy new features rapidly with the highest quality. Work in an Agile, TDD, XP environment to collaborate with your team and across a giant organisation. You will review/Develop Technical Stories. Write great software to build business features and participate in Code reviews. Work closely with team lead, architects and other peer team members in software development. Successful candidates will have the ability to apply extensive knowledge of application programming and analysis. You will be proven experience in software development methodologies. Excellent practical and theoretical knowledge of ASP.NET stack technologies - You will have experience with .NETCore, C#, MVC, Web API, Entity Framework, Sql Server, noSQL database and Javascript, especially Angular. You will have broad knowledge of application programming and procedures to tackle complex problems.Familiar with distributed systems, messaging technologies and cloud based systems including microservice and SOA-based architecture and experience in working with an Agile/Scrum. If this role sounds of interest then drop me a CV so that we can speak in more detail.
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
25/04/2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Infoplus Technologies UK Ltd
Peterborough, Cambridgeshire
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
25/04/2024
Role: Through this role, the successful candidate will have an excellent opportunity be involved in the design and development of controls and software for advanced diesel engine controls and/or hybrid systems controls. Responsibilities: Work with process partner teams (primarily Industrial Power Systems Division) to gather and develop requirements for the advanced diesel engines and hybrid power systems being developed for future, more sustainable, low carbon power systems. Create control algorithms/software models using Matlab, Simulink and Stateflow to meet diesel engine and/or hybrid power system software requirements. Conduct control system tuning/calibration activities on test bench and/or on test bed/machine to achieve desired system performance. Conduct sub-system FMEAs, documenting potential failure modes, identifying, and completing design and validation actions and managing subsequent updates. Plan and execute verification and validation testing for electronics/control system software in SiL, HiL or on-test bed or development machines. Troubleshoot and resolve electronics/control system issues encountered during engine or power system running. Competencies: Essential: Strong technical background (HNC or technical degree preferred in mechanical or electronic, electrical, control systems or automotive engineering) with 10+ Years of experience. Essential experience is working previously with Diesel Engines and having the Diesel Engine knowledge. Matlab, Simulink and Stateflow experience is essential, must've used it to create Control Algorithms. Significant, demonstrable experience of using Mathworks tools (Matlab, Simulink and Stateflow) for model-based software design and development to create Embedded software. This should have been gained in a diesel engine or hybrid power systems development environment. Ability to translate and develop customer requirements and objectives into production-ready software models. Knowledge of software FMEA and validation plan creation. Excellent communications skills & Teamwork Desirable: Good understanding of the off-highway industry, ideally gained through direct involvement in the development of powertrain, hydraulics, or other control systems. Experience of Caterpillar control software processes and tools. Experience of HiL test equipment and the ability to programme automated tests. Knowledge of software version control systems, ideally GiT or Clearcase. Knowledge of/prior experience of developing software to meet functional safety requirements.
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
25/04/2024
Project-based
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
Low level Embedded Software Engineer JOB LOCATION: Bristol SECURITY CLEARANCE LEVEL - SC DURATION: Months Minimum WORK PATTERN: Full Time Onsite (5 days/4 days compressed on site & Overtime- Yes, if needed) PAY RATE: £55 PAYE/£70 Per Hour Umbrella Overview of Department: Bristol Embedded Software provide Real Time solutions for our in house advanced weapon Bristol Embedded Software develop Real Time software solutions for Missile Units/Subsystems produced internally within MBDA. We design, develop, build, integrate, test and support the whole SW product. Responsibilities: The Low Level & Security software engineer will be responsible for the through life development of one or more of the internally developed security solutions and bespoke product lines. Required: Embedded C programming & debugging Hardware/software integration experience Experience working to standards Experience with ARM processors Basic Linux skills. Desirable: Full software life cycle experience (design, development and test) Knowledge of Real Time Operating Systems (eg PikeOS, FreeRTOS) Knowledge of Lauterbach debug tools Experience with ARM Cortex-A series processors Knowledge of ARM TrustZone Knowledge of IBM Configuration Management tools (RTC/EWM) Very interested in knowledge of Texas Instruments TD4A family of processors.
25/04/2024
Project-based
Low level Embedded Software Engineer JOB LOCATION: Bristol SECURITY CLEARANCE LEVEL - SC DURATION: Months Minimum WORK PATTERN: Full Time Onsite (5 days/4 days compressed on site & Overtime- Yes, if needed) PAY RATE: £55 PAYE/£70 Per Hour Umbrella Overview of Department: Bristol Embedded Software provide Real Time solutions for our in house advanced weapon Bristol Embedded Software develop Real Time software solutions for Missile Units/Subsystems produced internally within MBDA. We design, develop, build, integrate, test and support the whole SW product. Responsibilities: The Low Level & Security software engineer will be responsible for the through life development of one or more of the internally developed security solutions and bespoke product lines. Required: Embedded C programming & debugging Hardware/software integration experience Experience working to standards Experience with ARM processors Basic Linux skills. Desirable: Full software life cycle experience (design, development and test) Knowledge of Real Time Operating Systems (eg PikeOS, FreeRTOS) Knowledge of Lauterbach debug tools Experience with ARM Cortex-A series processors Knowledge of ARM TrustZone Knowledge of IBM Configuration Management tools (RTC/EWM) Very interested in knowledge of Texas Instruments TD4A family of processors.
Senior Applications Engineer (Automotive & Defence) - RL7365 Salary Competitive Benefits Excellent Benefits Location Paris The Client Curo are partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The company designs, manufactures, and supplies advanced satellite navigation test and simulation systems, many of which comprise radio frequency signal generators and computer systems running complex application software; all designed in-house. The Candidate The successful candidate will have industry experience with Positioning, Navigation & Timing (PNT)/Global navigation satellite systems (GNSS), or similar wireless technologies including test methodology and analysis skills. The role requires a confident communicator, who has the ability to explain and present technical solutions and the benefits they provide to the organisations clients in the Defence and Automotive space. We are looking for a driver, to facilitate client visits. The Role As an Applications Engineer, you would be focusing predominantly on the military and automotive market. Reporting into the professional services team based in the UK, you will be responsible for assisting the BD teams in providing technical pre-sales and apps support in a timely fashion based on the opportunity and complexity at hand. Whilst working closely with customers it would be expected of you to build a relationship with the customer, develop deep understanding of their use case and provide feedback back to the Professional Services team and wider Business Unit. Some elements of delivering Professional Services mostly in EMEA could also be part of the role. You will have a close working relationship with peers in Sales, Global Services, and Business Development. In addition, the role will be hybrid with occasional visits to the organisations UK office in Devon and customer site locations, particularly across the EMEA sector as needed. Key Duties Provide technical and applications support primarily in pre-sales but also in post-sales situations. Engage in complex technical discussions with customers to understand their needs. Utilize deep knowledge of the companys products and services to align appropriate solutions based on client needs. Help design solutions and formulate responses to RFx, deliver POC/demos, and present solutions to customers. Liaise closely with engineering, professional services and tailored solutions teams to address complex customer requests. Grow depth of relationships with customers in the Defence and Automotive markets. Staying abreast of developments in GNSS/PNT technologies and test methodologies. Provide customer feedback on products, services, and process improvements as needed. Work closely with Sales Enablement team to generate application-specific materials. Requirements Bachelors degree in electrical engineering, Computer Science, or another technical field from an accredited university; or equivalent work experience. Significant experience of relevant industry experience with GNSS, PNT or similar technologies. Familiarity with test automation programming environments including LabView,Matlab desirable. Self-motivated team player with proven problem-solving skills. Experience in a customer-facing role is preferred. Ability to communicate technical material clearly, both verbally and in writing. Ability to work closely with other people to solve challenging problems. Experience using GNSS Test Equipment and/or GNSS receivers is a plus. Travel may be required up to 25% To apply for this Senior Applications Engineer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
25/04/2024
Full time
Senior Applications Engineer (Automotive & Defence) - RL7365 Salary Competitive Benefits Excellent Benefits Location Paris The Client Curo are partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The company designs, manufactures, and supplies advanced satellite navigation test and simulation systems, many of which comprise radio frequency signal generators and computer systems running complex application software; all designed in-house. The Candidate The successful candidate will have industry experience with Positioning, Navigation & Timing (PNT)/Global navigation satellite systems (GNSS), or similar wireless technologies including test methodology and analysis skills. The role requires a confident communicator, who has the ability to explain and present technical solutions and the benefits they provide to the organisations clients in the Defence and Automotive space. We are looking for a driver, to facilitate client visits. The Role As an Applications Engineer, you would be focusing predominantly on the military and automotive market. Reporting into the professional services team based in the UK, you will be responsible for assisting the BD teams in providing technical pre-sales and apps support in a timely fashion based on the opportunity and complexity at hand. Whilst working closely with customers it would be expected of you to build a relationship with the customer, develop deep understanding of their use case and provide feedback back to the Professional Services team and wider Business Unit. Some elements of delivering Professional Services mostly in EMEA could also be part of the role. You will have a close working relationship with peers in Sales, Global Services, and Business Development. In addition, the role will be hybrid with occasional visits to the organisations UK office in Devon and customer site locations, particularly across the EMEA sector as needed. Key Duties Provide technical and applications support primarily in pre-sales but also in post-sales situations. Engage in complex technical discussions with customers to understand their needs. Utilize deep knowledge of the companys products and services to align appropriate solutions based on client needs. Help design solutions and formulate responses to RFx, deliver POC/demos, and present solutions to customers. Liaise closely with engineering, professional services and tailored solutions teams to address complex customer requests. Grow depth of relationships with customers in the Defence and Automotive markets. Staying abreast of developments in GNSS/PNT technologies and test methodologies. Provide customer feedback on products, services, and process improvements as needed. Work closely with Sales Enablement team to generate application-specific materials. Requirements Bachelors degree in electrical engineering, Computer Science, or another technical field from an accredited university; or equivalent work experience. Significant experience of relevant industry experience with GNSS, PNT or similar technologies. Familiarity with test automation programming environments including LabView,Matlab desirable. Self-motivated team player with proven problem-solving skills. Experience in a customer-facing role is preferred. Ability to communicate technical material clearly, both verbally and in writing. Ability to work closely with other people to solve challenging problems. Experience using GNSS Test Equipment and/or GNSS receivers is a plus. Travel may be required up to 25% To apply for this Senior Applications Engineer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
25/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Request Technology - Craig Johnson
Chicago, Illinois
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Manager of Enterprise Quality Assurance. Candidate will lead the Quality Assurance (QA) function for the Information Technology Team. This leader will own quality strategies, implementation and institutionalization of specific tailored solutions for each production deliverable, ongoing development of the team and metrics development, reporting and improvement. The production deliverables include external and internal facing products running on or in laptops, desktops, mobile devices, data centers, cloud and hybrid environments around the world. An important goal of this role is to improve speed to business value and reducing defects that impact end-user productivity. Responsibilities: Develop and implement specific QA tailored solutions for each production deliverable. Establish relationship and governance with internal and third-party team members to conduct Quality Assurance responsibilities. Oversee and manage a global QA team with diverse backgrounds supporting QA development, which may include one or more third-party organizations. Ensure that management and allocation of QA resources based on project needs is performed. Develop, implement, or enhance and institutionalize QA processes, including metrics/measurements, reporting, and continuous improvement, that balance risk and delivery timelines. Integrate required and suggested testing framework in the IT Technology Services organization. Staying up to date with current state-of-the-art testing practices, testing practices and testing tools Ensure that QA feedback is being used to improve deliverable life cycle processes. Works with project team members to design, develop, and execute test plans. May consult to project teams, Subject Matter Experts (SMEs), and Business Units to design and develop test plans, test cases, and execution procedures. Recommends appropriate test execution approach in consideration of cost, scope, and timeline of product/solution delivery. Identifies test execution metrics to project team members. Prepares and communicates test results and reports accurate testing status to project team members. Provides estimates of text execution to support project-level resource planning efforts. May be required to facilitate onboarding and off boarding of in-sourced and/or outsourced testing resources. Review others (team or cross team) executed test results and help determine issues and priorities. Create and maintain quality control artifacts and make available to teams within and outside of IT. Adheres to industry and Firmwide IT specific quality engineering standards and processes. May be required to step in as a product manager for products that do not have an assigned Product Manager. Qualifications: Bachelor's degree in Computer Science, Computer Engineering, Information Technology or equivalent experience. 10 years of experience in software development and software quality assurance. 3 years of experience working in Agile development process. 3 years of experience with performance and load testing. 3 years of experience in management of QA organization including management of third parties that are also delivering QA services. Proficiency with software QA methodologies, tools, and processes. Proficiency in project management. Strong listening skills and highly collaborative. Good written and verbal communication skills. Attention to detail where needed. Clearly expresses verbal and written ideas. Understands, interprets and evaluates messages. Collaborates effectively. Conducts him/herself with utmost integrity at all times. Reports unethical conduct as required. Encourages fiscal responsibility and maintains confidentiality. Builds and maintains positive and supportive relationships across all departments and offices. Resolves conflict constructively. Establishes an environment of trust to promote knowledge sharing and group participation. Effectively resolves conflicts. Technologies: Microsoft Office applications iDevice (Iphone/IPad) Communications: Avaya Telephone/Equinox, Zoom, TEAMS, SKYPE Test Management System: JIRA, ServiceNow, ADO Project Management: Eclipse/Microsoft Project SQL (Writing simple queries) Enterprise Management Systems, Finance, Human Resource, Time Tracking, Billing, Risk SharePoint
24/04/2024
Full time
*We are unable to sponsor for this permanent Full time role* *Position is bonus eligible* Prestigious Global Firm is currently seeking a Manager of Enterprise Quality Assurance. Candidate will lead the Quality Assurance (QA) function for the Information Technology Team. This leader will own quality strategies, implementation and institutionalization of specific tailored solutions for each production deliverable, ongoing development of the team and metrics development, reporting and improvement. The production deliverables include external and internal facing products running on or in laptops, desktops, mobile devices, data centers, cloud and hybrid environments around the world. An important goal of this role is to improve speed to business value and reducing defects that impact end-user productivity. Responsibilities: Develop and implement specific QA tailored solutions for each production deliverable. Establish relationship and governance with internal and third-party team members to conduct Quality Assurance responsibilities. Oversee and manage a global QA team with diverse backgrounds supporting QA development, which may include one or more third-party organizations. Ensure that management and allocation of QA resources based on project needs is performed. Develop, implement, or enhance and institutionalize QA processes, including metrics/measurements, reporting, and continuous improvement, that balance risk and delivery timelines. Integrate required and suggested testing framework in the IT Technology Services organization. Staying up to date with current state-of-the-art testing practices, testing practices and testing tools Ensure that QA feedback is being used to improve deliverable life cycle processes. Works with project team members to design, develop, and execute test plans. May consult to project teams, Subject Matter Experts (SMEs), and Business Units to design and develop test plans, test cases, and execution procedures. Recommends appropriate test execution approach in consideration of cost, scope, and timeline of product/solution delivery. Identifies test execution metrics to project team members. Prepares and communicates test results and reports accurate testing status to project team members. Provides estimates of text execution to support project-level resource planning efforts. May be required to facilitate onboarding and off boarding of in-sourced and/or outsourced testing resources. Review others (team or cross team) executed test results and help determine issues and priorities. Create and maintain quality control artifacts and make available to teams within and outside of IT. Adheres to industry and Firmwide IT specific quality engineering standards and processes. May be required to step in as a product manager for products that do not have an assigned Product Manager. Qualifications: Bachelor's degree in Computer Science, Computer Engineering, Information Technology or equivalent experience. 10 years of experience in software development and software quality assurance. 3 years of experience working in Agile development process. 3 years of experience with performance and load testing. 3 years of experience in management of QA organization including management of third parties that are also delivering QA services. Proficiency with software QA methodologies, tools, and processes. Proficiency in project management. Strong listening skills and highly collaborative. Good written and verbal communication skills. Attention to detail where needed. Clearly expresses verbal and written ideas. Understands, interprets and evaluates messages. Collaborates effectively. Conducts him/herself with utmost integrity at all times. Reports unethical conduct as required. Encourages fiscal responsibility and maintains confidentiality. Builds and maintains positive and supportive relationships across all departments and offices. Resolves conflict constructively. Establishes an environment of trust to promote knowledge sharing and group participation. Effectively resolves conflicts. Technologies: Microsoft Office applications iDevice (Iphone/IPad) Communications: Avaya Telephone/Equinox, Zoom, TEAMS, SKYPE Test Management System: JIRA, ServiceNow, ADO Project Management: Eclipse/Microsoft Project SQL (Writing simple queries) Enterprise Management Systems, Finance, Human Resource, Time Tracking, Billing, Risk SharePoint
NO SPONSORSHIP QUALITY ASSURANCE MANAGER SALARY: $140K - $175K FLEX PLUS Bonus LOCATION: Chicago, IL This is a manager position. You will be a people manager managing vendors, outsourced resources, onshore, offshore, MSAS Back End technology. Applications desktop mobility strategies implementations products cloud global experience reducing defects that impact end users productivity will support QA development metrics agile tools processes Microsoft applications Jira ServiceNow This role will lead the Quality Assurance (QA) function for the Information Technology Team. This leader will own quality strategies, implementation and institutionalization of specific tailored solutions for each production deliverable, ongoing development of the team and metrics development, reporting and improvement. The production deliverables include external and internal facing products running on or in laptops, desktops, mobile devices, data centers, cloud and hybrid environments around the world. An important goal of this role is to improve speed to business value and reducing defects that impact end-user productivity. Develop and implement specific QA tailored solutions for each production deliverable. Establish relationship and governance with internal and third-party team members to conduct Quality Assurance responsibilities. Oversee and manage a global QA team with diverse backgrounds supporting QA development, which may include one or more third-party organizations. Ensure that management and allocation of QA resources based on project needs is performed. Develop, implement, or enhance and institutionalize QA processes, including metrics/measurements, reporting, and continuous improvement, that balance risk and delivery timelines. Integrate required and suggested testing framework in the IT Technology Services organization. Staying up to date with current state-of-the-art testing practices, testing practices and testing tools Ensure that QA feedback is being used to improve deliverable life cycle processes. Works with project team members to design, develop, and execute test plans. May consult to project teams, Subject Matter Experts (SMEs), and Business Units to design and develop test plans, test cases, and execution procedures. Recommends appropriate test execution approach in consideration of cost, scope, and timeline of product/solution delivery. Identifies test execution metrics to project team members. Prepares and communicates test results and reports accurate testing status to project team members. Provides estimates of text execution to support project-level resource planning efforts. May be required to facilitate onboarding and off boarding of in-sourced and/or outsourced testing resources. Review others (team or cross team) executed test results and help determine issues and priorities. Create and maintain quality control artifacts and make available to teams within and outside of IT. Adheres to industry and Firmwide IT specific quality engineering standards and processes. May be required to step in as a product manager for products that do not have an assigned Product Manager. Qualifications & Requirements Bachelors degree 10 years of experience in software development and software quality assurance. 3 years of experience working in Agile development process. 3 years of experience with performance and load testing. 3 years of experience in management of QA organization including management of third parties that are also delivering QA services. Proficiency with software QA methodologies, tools, and processes. Proficiency in project management. Strong listening skills and highly collaborative. Microsoft Office applications iDevice (Iphone/IPad) Communications: Avaya Telephone/Equinox, Zoom, TEAMS, SKYPE Test Management System: JIRA, ServiceNow, ADO Project Management: Eclipse/Microsoft Project SQL (Writing simple queries) Enterprise Management Systems, Finance, Human Resource, Time Tracking, Billing, Risk SharePoint
24/04/2024
Full time
NO SPONSORSHIP QUALITY ASSURANCE MANAGER SALARY: $140K - $175K FLEX PLUS Bonus LOCATION: Chicago, IL This is a manager position. You will be a people manager managing vendors, outsourced resources, onshore, offshore, MSAS Back End technology. Applications desktop mobility strategies implementations products cloud global experience reducing defects that impact end users productivity will support QA development metrics agile tools processes Microsoft applications Jira ServiceNow This role will lead the Quality Assurance (QA) function for the Information Technology Team. This leader will own quality strategies, implementation and institutionalization of specific tailored solutions for each production deliverable, ongoing development of the team and metrics development, reporting and improvement. The production deliverables include external and internal facing products running on or in laptops, desktops, mobile devices, data centers, cloud and hybrid environments around the world. An important goal of this role is to improve speed to business value and reducing defects that impact end-user productivity. Develop and implement specific QA tailored solutions for each production deliverable. Establish relationship and governance with internal and third-party team members to conduct Quality Assurance responsibilities. Oversee and manage a global QA team with diverse backgrounds supporting QA development, which may include one or more third-party organizations. Ensure that management and allocation of QA resources based on project needs is performed. Develop, implement, or enhance and institutionalize QA processes, including metrics/measurements, reporting, and continuous improvement, that balance risk and delivery timelines. Integrate required and suggested testing framework in the IT Technology Services organization. Staying up to date with current state-of-the-art testing practices, testing practices and testing tools Ensure that QA feedback is being used to improve deliverable life cycle processes. Works with project team members to design, develop, and execute test plans. May consult to project teams, Subject Matter Experts (SMEs), and Business Units to design and develop test plans, test cases, and execution procedures. Recommends appropriate test execution approach in consideration of cost, scope, and timeline of product/solution delivery. Identifies test execution metrics to project team members. Prepares and communicates test results and reports accurate testing status to project team members. Provides estimates of text execution to support project-level resource planning efforts. May be required to facilitate onboarding and off boarding of in-sourced and/or outsourced testing resources. Review others (team or cross team) executed test results and help determine issues and priorities. Create and maintain quality control artifacts and make available to teams within and outside of IT. Adheres to industry and Firmwide IT specific quality engineering standards and processes. May be required to step in as a product manager for products that do not have an assigned Product Manager. Qualifications & Requirements Bachelors degree 10 years of experience in software development and software quality assurance. 3 years of experience working in Agile development process. 3 years of experience with performance and load testing. 3 years of experience in management of QA organization including management of third parties that are also delivering QA services. Proficiency with software QA methodologies, tools, and processes. Proficiency in project management. Strong listening skills and highly collaborative. Microsoft Office applications iDevice (Iphone/IPad) Communications: Avaya Telephone/Equinox, Zoom, TEAMS, SKYPE Test Management System: JIRA, ServiceNow, ADO Project Management: Eclipse/Microsoft Project SQL (Writing simple queries) Enterprise Management Systems, Finance, Human Resource, Time Tracking, Billing, Risk SharePoint
World Class Defence Organisation based in Portsmouth is currently looking to recruit a C++ Embedded Software Engineer subcontractor on an initial 6 month contract. Hourly Rate: £70.00 (Umbrella) Contract Duration: 6 months initially and then ongoing thereafter C++ Embedded Software Engineer Job Description: The team is undertaking the design and implementation of a satellite communications Software Defined Radio (SDR) modem. You will be part of a small multi-disciplinary team containing software, system, firmware and infrastructure engineers. There will be scope in the future to work on further developments as project needs arise. You will research and develop aspects of modem products and associated communications systems, using your experience in software within complex systems. Skills/Experience Required Essential experience with - Modern C++ software engineering for target Linux platforms to a high standard Developing using Eclipse CDT running on a Linux based operating system Device management interfaces (eg SNMP, Web) for design, implementation and test Git for version control Inter-process communication and techniques Unit and integration test tools (eg Google Test, Robot Framework) Atlassian toolset (eg Jira, Confluence, BitBucket) Desirable skills - Agile or Scrum working environment experience would be very beneficial System and software modelling tools such as Enterprise Architect (SysML/UML) User interface design, implementation and test using HTML, CSS and JavaScript Similar industries you could come from: Space Aerospace Communications Radar
24/04/2024
Project-based
World Class Defence Organisation based in Portsmouth is currently looking to recruit a C++ Embedded Software Engineer subcontractor on an initial 6 month contract. Hourly Rate: £70.00 (Umbrella) Contract Duration: 6 months initially and then ongoing thereafter C++ Embedded Software Engineer Job Description: The team is undertaking the design and implementation of a satellite communications Software Defined Radio (SDR) modem. You will be part of a small multi-disciplinary team containing software, system, firmware and infrastructure engineers. There will be scope in the future to work on further developments as project needs arise. You will research and develop aspects of modem products and associated communications systems, using your experience in software within complex systems. Skills/Experience Required Essential experience with - Modern C++ software engineering for target Linux platforms to a high standard Developing using Eclipse CDT running on a Linux based operating system Device management interfaces (eg SNMP, Web) for design, implementation and test Git for version control Inter-process communication and techniques Unit and integration test tools (eg Google Test, Robot Framework) Atlassian toolset (eg Jira, Confluence, BitBucket) Desirable skills - Agile or Scrum working environment experience would be very beneficial System and software modelling tools such as Enterprise Architect (SysML/UML) User interface design, implementation and test using HTML, CSS and JavaScript Similar industries you could come from: Space Aerospace Communications Radar
Annual Salary offered like £50K-55K GBP per annum maximum We are seeking an experienced and detail-oriented Electrical Systems Engineer to join our team. The successful candidate will be responsible for designing, developing, and maintaining electrical systems for our engineering projects. The ideal candidate will have a passion for electronic system design, excellent communication skills, and a solutions-focused mindset. Key Responsibilities: Design, develop, and test electrical systems. Collaborate with cross-functional teams to ensure seamless integration of electrical systems with other components. Conduct thorough analysis and troubleshooting of electrical systems to identify and resolve issues. Present complex technical concepts to a broad stakeholder audience in a clear and concise manner. Work effectively under pressure to meet project deadlines and deliverables. Maintain a solutions-focused approach, actively seeking opportunities for innovation and improvement. Document all design specifications, processes, and test results to ensure compliance with regulatory standards and project requirements. Requirements: Bachelor's degree in Electronic Systems Engineering, Electrical Engineering, or a related field. Minimum of 2 years of experience in a relevant industry, with a demonstrated track record of designing and implementing electrical systems. Aptitude for electronic system design with a keen eye for detail. Excellent communication skills, including the ability to convey complex technical concepts to diverse stakeholders. Resilient and able to work effectively under pressure to meet tight deadlines. Solutions-focused mindset with a drive for discovery and innovation. Familiarity with regulatory standards and requirements relevant to electrical system design and implementation. Advantageous should the candidates have any of the following Proficiency in electrical design software and tools (eg, CAD, MATLAB, LabVIEW). Benefits: 5.5 weeks holiday with a Buy & Sell holiday scheme. Competitive pension scheme. Cycle to work scheme. Death in service benefit. An opportunity for personal development and promotion. Occupational Health/Annual Medicals.
24/04/2024
Full time
Annual Salary offered like £50K-55K GBP per annum maximum We are seeking an experienced and detail-oriented Electrical Systems Engineer to join our team. The successful candidate will be responsible for designing, developing, and maintaining electrical systems for our engineering projects. The ideal candidate will have a passion for electronic system design, excellent communication skills, and a solutions-focused mindset. Key Responsibilities: Design, develop, and test electrical systems. Collaborate with cross-functional teams to ensure seamless integration of electrical systems with other components. Conduct thorough analysis and troubleshooting of electrical systems to identify and resolve issues. Present complex technical concepts to a broad stakeholder audience in a clear and concise manner. Work effectively under pressure to meet project deadlines and deliverables. Maintain a solutions-focused approach, actively seeking opportunities for innovation and improvement. Document all design specifications, processes, and test results to ensure compliance with regulatory standards and project requirements. Requirements: Bachelor's degree in Electronic Systems Engineering, Electrical Engineering, or a related field. Minimum of 2 years of experience in a relevant industry, with a demonstrated track record of designing and implementing electrical systems. Aptitude for electronic system design with a keen eye for detail. Excellent communication skills, including the ability to convey complex technical concepts to diverse stakeholders. Resilient and able to work effectively under pressure to meet tight deadlines. Solutions-focused mindset with a drive for discovery and innovation. Familiarity with regulatory standards and requirements relevant to electrical system design and implementation. Advantageous should the candidates have any of the following Proficiency in electrical design software and tools (eg, CAD, MATLAB, LabVIEW). Benefits: 5.5 weeks holiday with a Buy & Sell holiday scheme. Competitive pension scheme. Cycle to work scheme. Death in service benefit. An opportunity for personal development and promotion. Occupational Health/Annual Medicals.
Annual Salary Maximum £50k-55k GBP per annum We are seeking an experienced and detail-oriented Electrical Systems Engineer to join our team. The successful candidate will be responsible for designing, developing, and maintaining electrical systems for our engineering projects. The ideal candidate will have a passion for electronic system design, excellent communication skills, and a solutions-focused mindset. Key Responsibilities: Design, develop, and test electrical systems. Collaborate with cross-functional teams to ensure seamless integration of electrical systems with other components. Conduct thorough analysis and troubleshooting of electrical systems to identify and resolve issues. Present complex technical concepts to a broad stakeholder audience in a clear and concise manner. Work effectively under pressure to meet project deadlines and deliverables. Maintain a solutions-focused approach, actively seeking opportunities for innovation and improvement. Document all design specifications, processes, and test results to ensure compliance with regulatory standards and project requirements. Requirements: Bachelor's degree in Electronic Systems Engineering, Electrical Engineering, or a related field. Minimum of 2 years of experience in a relevant industry, with a demonstrated track record of designing and implementing electrical systems. Aptitude for electronic system design with a keen eye for detail. Excellent communication skills, including the ability to convey complex technical concepts to diverse stakeholders. Resilient and able to work effectively under pressure to meet tight deadlines. Solutions-focused mindset with a drive for discovery and innovation. Familiarity with regulatory standards and requirements relevant to electrical system design and implementation. Advantageous should the candidates have any of the following Proficiency in electrical design software and tools (eg, CAD, MATLAB, LabVIEW). Benefits: 5.5 weeks holiday with a Buy & Sell holiday scheme. Competitive pension scheme. Cycle to work scheme. Death in service benefit. An opportunity for personal development and promotion. Occupational Health/Annual Medicals.
24/04/2024
Full time
Annual Salary Maximum £50k-55k GBP per annum We are seeking an experienced and detail-oriented Electrical Systems Engineer to join our team. The successful candidate will be responsible for designing, developing, and maintaining electrical systems for our engineering projects. The ideal candidate will have a passion for electronic system design, excellent communication skills, and a solutions-focused mindset. Key Responsibilities: Design, develop, and test electrical systems. Collaborate with cross-functional teams to ensure seamless integration of electrical systems with other components. Conduct thorough analysis and troubleshooting of electrical systems to identify and resolve issues. Present complex technical concepts to a broad stakeholder audience in a clear and concise manner. Work effectively under pressure to meet project deadlines and deliverables. Maintain a solutions-focused approach, actively seeking opportunities for innovation and improvement. Document all design specifications, processes, and test results to ensure compliance with regulatory standards and project requirements. Requirements: Bachelor's degree in Electronic Systems Engineering, Electrical Engineering, or a related field. Minimum of 2 years of experience in a relevant industry, with a demonstrated track record of designing and implementing electrical systems. Aptitude for electronic system design with a keen eye for detail. Excellent communication skills, including the ability to convey complex technical concepts to diverse stakeholders. Resilient and able to work effectively under pressure to meet tight deadlines. Solutions-focused mindset with a drive for discovery and innovation. Familiarity with regulatory standards and requirements relevant to electrical system design and implementation. Advantageous should the candidates have any of the following Proficiency in electrical design software and tools (eg, CAD, MATLAB, LabVIEW). Benefits: 5.5 weeks holiday with a Buy & Sell holiday scheme. Competitive pension scheme. Cycle to work scheme. Death in service benefit. An opportunity for personal development and promotion. Occupational Health/Annual Medicals.
Hardware Design Engineer - Permanent - Glasgow, Edinburgh, or Prestwick (hybrid) Evolve IT Recruitment are hiring for an exciting new opportunity with our ambitious client that is a leader in providing innovative products and solutions in the global video surveillance industry. Our client is keen to hire someone that thrives in a team-based and highly collaborative culture, where learning new technology and having fun are as important as your design and support in delivering to a leading manufacturing process. You will have the opportunity to work on exciting and challenging projects, applying your expert knowledge and skills to new product development, supporting the full life cycle from concept to manufacture. Ideally your background will include digital design and development, schematic capture, and EMC design practices, as well as any experience in PCB layouts and FPGA development. Our client has offices in Prestwick, Glasgow, and Edinburgh - you can be office based or work hybrid - they are happy to support what suits you and helps you to achieve your best work. Responsibilities: - You will be responsible for new product development, supporting the full life cycle from concept to manufacture - Maintain and update existing hardware designs - Manage external resources as required to deliver your projects - Work with the Design team, to meet brand and design requirements - Support the testing and debugging of new hardware, developing and utilising test software as required. - Aid the development of production test tools and software - Work with the software team, assist in the management and control of software releases Essential: - Digital Design and Development - Schematic Capture - EMC Design Practices - Test and Debugging - Generating production documentation Desirable: - Analogue Design experience - Any experience of OrCAD, Design Spark schematic capture packages - PCB Layout and FPGA development - VHDL, Altera, Lattice, Timing closure - Firmware development - Microcontroller or Linux - PCB Rework - Surface mount assembly
24/04/2024
Full time
Hardware Design Engineer - Permanent - Glasgow, Edinburgh, or Prestwick (hybrid) Evolve IT Recruitment are hiring for an exciting new opportunity with our ambitious client that is a leader in providing innovative products and solutions in the global video surveillance industry. Our client is keen to hire someone that thrives in a team-based and highly collaborative culture, where learning new technology and having fun are as important as your design and support in delivering to a leading manufacturing process. You will have the opportunity to work on exciting and challenging projects, applying your expert knowledge and skills to new product development, supporting the full life cycle from concept to manufacture. Ideally your background will include digital design and development, schematic capture, and EMC design practices, as well as any experience in PCB layouts and FPGA development. Our client has offices in Prestwick, Glasgow, and Edinburgh - you can be office based or work hybrid - they are happy to support what suits you and helps you to achieve your best work. Responsibilities: - You will be responsible for new product development, supporting the full life cycle from concept to manufacture - Maintain and update existing hardware designs - Manage external resources as required to deliver your projects - Work with the Design team, to meet brand and design requirements - Support the testing and debugging of new hardware, developing and utilising test software as required. - Aid the development of production test tools and software - Work with the software team, assist in the management and control of software releases Essential: - Digital Design and Development - Schematic Capture - EMC Design Practices - Test and Debugging - Generating production documentation Desirable: - Analogue Design experience - Any experience of OrCAD, Design Spark schematic capture packages - PCB Layout and FPGA development - VHDL, Altera, Lattice, Timing closure - Firmware development - Microcontroller or Linux - PCB Rework - Surface mount assembly
Trust in Soda are partnered with a n exciting Swiss Bank that are changing the way that the average person invests and trades. Their approach to the market is already gaining traction and shaking up the norm Location: Geneva Rate: 120 - 150CHF/Hour Length of Contract: 12months What will you be doing? Designing, setting up and maintaining development, testing and production systems including networks Automate processes for generating builds and releases as well as conducting tests and software deliveries (CD/CI, build pipeline, code management, etc.) Coaching and guiding team members in the area of "DevOps" Monitor metrics and identify opportunities for improvement Developing, implementing and maintaining software applications Your experience Experience in Docker, Kubernetes & AWS You are no stranger to OpenStack & Git In addition to Windows, an affinity for Linux and the cloud Broad knowledge of infrastructure and automation (Scripting, build and deploy pipelines) You don't shy away from the development part (OO programming language Java, Python or similar)
24/04/2024
Project-based
Trust in Soda are partnered with a n exciting Swiss Bank that are changing the way that the average person invests and trades. Their approach to the market is already gaining traction and shaking up the norm Location: Geneva Rate: 120 - 150CHF/Hour Length of Contract: 12months What will you be doing? Designing, setting up and maintaining development, testing and production systems including networks Automate processes for generating builds and releases as well as conducting tests and software deliveries (CD/CI, build pipeline, code management, etc.) Coaching and guiding team members in the area of "DevOps" Monitor metrics and identify opportunities for improvement Developing, implementing and maintaining software applications Your experience Experience in Docker, Kubernetes & AWS You are no stranger to OpenStack & Git In addition to Windows, an affinity for Linux and the cloud Broad knowledge of infrastructure and automation (Scripting, build and deploy pipelines) You don't shy away from the development part (OO programming language Java, Python or similar)
The role of a Technical Architect (VoIP & Cloud Communications) to join a Global Network Operations & Engineering team. To navigate complex technological landscapes and devise solutions. Be responsible for the implementation & configuration of projects leading a team of VoIP engineers. A variety of project activities from design, deployment and remediation as well as supporting escalated complex Carrier/Telephony issues. Client Details Our client is a pioneer in the Technology & Telecoms industry, boasting a substantial employee base spread across multiple global locations. They are committed to delivering innovative solutions that revolutionise the way businesses operate, and they maintain a strong market presence through their robust and scalable technological offerings. Description A successful Technical Architect (VoIP & Cloud Communications) will be: Developing and implementing high-level technology strategies that align with business objectives. Providing expert guidance to the technology team and stakeholders on technology architecture and infrastructure. Driving technology projects to successful completion, ensuring timely delivery within budget constraints. Collaborating with team members to design and implement innovative technology solutions. Ensuring technology systems and procedures lead to outcomes in line with business goals. Keeping abreast of the latest industry trends and advancements in technology and telecoms. Managing and optimising technology budgets and timelines. Ensuring all technology practices adhere to regulatory standards. Technical Skills Required: Advanced knowledge of open source telecommunications software such as Kamailio, Asterisk & FS Strong knowledge of SIP, SDP, RTP & SRTP Deep knowledge of Linux systems, networking and tools Understanding of standard audio codecs and troubleshooting media sessions VoIP systems built on Kamailio Scaling cloud communications systems & infrastructure Experience designing, troubleshooting and configuring VoIP systems Demonstrated expertise in VoIP engineering and administration Robust troubleshooting abilities and adept problem-solving skills within VoIP environments. Experience with SBC, PBX for Real Time communication applications Experience developing, deploying and operating VoIP monitoring, reporting and alerting systems. Linux/Unix understanding and ability to navigate through a system, review logs, etc. Experience with virtualization and cloud computing Experience of both Carrier and UC & C Networks Understanding of general networking ideally Cisco routing and switching Linux and Database knowledge highly desirable Designing, configuring, and troubleshooting VoIP systems Implementing and optimizing open source based VoIP solutions - Redhat/CentOS/Ubuntu Collaborating with cross-functional teams to integrate VoIP systems with existing network infrastructure Providing technical expertise and support for VoIP-related issues Contributing to the development of innovative VoIP solutions and services Profile A successful Technical Architect (VoIP & Cloud Communications) should have: Strong verbal skills (including presenting) to be able to articulate the value of Cloud Communications at multiple levels Excellent written communication skills for design, planning, and project documentation Confident, credible, and authoritative demeanour - to 'shape' a project and influence customers and stakeholders Experience dealing with customers and business stakeholders, at all levels Ability to work as part of a team across the time zones Ability to manage more than one project at a time Ability to knowledge share amongst the wider technical teams Desirable Experience and Qualifications 5+ years experience in Senior Voice Engineer/Architect Role MS700/MS720/MS 740 SBC vendor qualifications (Dialogic, Ribbon) Experience working with global multi-national carriers Proven track record in a Senior role Job Offer Hybrid working, ideally you will be based near Bristol or Cardiff but we welcome applicants with right to work in UK and open to travel when required. An attractive annual salary ranging between £75,000 - £85,000. Generous holiday leave and other benefits to ensure work-life balance. A culture that values innovation, collaboration and professional development. The unique opportunity to shape technology strategies in a leading company in the Technology & Telecoms industry.
24/04/2024
Full time
The role of a Technical Architect (VoIP & Cloud Communications) to join a Global Network Operations & Engineering team. To navigate complex technological landscapes and devise solutions. Be responsible for the implementation & configuration of projects leading a team of VoIP engineers. A variety of project activities from design, deployment and remediation as well as supporting escalated complex Carrier/Telephony issues. Client Details Our client is a pioneer in the Technology & Telecoms industry, boasting a substantial employee base spread across multiple global locations. They are committed to delivering innovative solutions that revolutionise the way businesses operate, and they maintain a strong market presence through their robust and scalable technological offerings. Description A successful Technical Architect (VoIP & Cloud Communications) will be: Developing and implementing high-level technology strategies that align with business objectives. Providing expert guidance to the technology team and stakeholders on technology architecture and infrastructure. Driving technology projects to successful completion, ensuring timely delivery within budget constraints. Collaborating with team members to design and implement innovative technology solutions. Ensuring technology systems and procedures lead to outcomes in line with business goals. Keeping abreast of the latest industry trends and advancements in technology and telecoms. Managing and optimising technology budgets and timelines. Ensuring all technology practices adhere to regulatory standards. Technical Skills Required: Advanced knowledge of open source telecommunications software such as Kamailio, Asterisk & FS Strong knowledge of SIP, SDP, RTP & SRTP Deep knowledge of Linux systems, networking and tools Understanding of standard audio codecs and troubleshooting media sessions VoIP systems built on Kamailio Scaling cloud communications systems & infrastructure Experience designing, troubleshooting and configuring VoIP systems Demonstrated expertise in VoIP engineering and administration Robust troubleshooting abilities and adept problem-solving skills within VoIP environments. Experience with SBC, PBX for Real Time communication applications Experience developing, deploying and operating VoIP monitoring, reporting and alerting systems. Linux/Unix understanding and ability to navigate through a system, review logs, etc. Experience with virtualization and cloud computing Experience of both Carrier and UC & C Networks Understanding of general networking ideally Cisco routing and switching Linux and Database knowledge highly desirable Designing, configuring, and troubleshooting VoIP systems Implementing and optimizing open source based VoIP solutions - Redhat/CentOS/Ubuntu Collaborating with cross-functional teams to integrate VoIP systems with existing network infrastructure Providing technical expertise and support for VoIP-related issues Contributing to the development of innovative VoIP solutions and services Profile A successful Technical Architect (VoIP & Cloud Communications) should have: Strong verbal skills (including presenting) to be able to articulate the value of Cloud Communications at multiple levels Excellent written communication skills for design, planning, and project documentation Confident, credible, and authoritative demeanour - to 'shape' a project and influence customers and stakeholders Experience dealing with customers and business stakeholders, at all levels Ability to work as part of a team across the time zones Ability to manage more than one project at a time Ability to knowledge share amongst the wider technical teams Desirable Experience and Qualifications 5+ years experience in Senior Voice Engineer/Architect Role MS700/MS720/MS 740 SBC vendor qualifications (Dialogic, Ribbon) Experience working with global multi-national carriers Proven track record in a Senior role Job Offer Hybrid working, ideally you will be based near Bristol or Cardiff but we welcome applicants with right to work in UK and open to travel when required. An attractive annual salary ranging between £75,000 - £85,000. Generous holiday leave and other benefits to ensure work-life balance. A culture that values innovation, collaboration and professional development. The unique opportunity to shape technology strategies in a leading company in the Technology & Telecoms industry.
Software Engineer - SC Cleared Salary: £35,000 - £55,000 Dependent on experience We are currently seeking a skilled and experienced Software Engineer to join the team at a leading defence engineering consultancy. You will have a strong background in software development, with experience in Python, Java, or Kotlin and supporting Back End and Middleware frameworks. As a Software Engineer, you will be responsible for designing, developing, and testing software systems for a range of applications. You will work closely with our multidisciplinary team of engineers to deliver innovative solutions to complex problems. Please note - Security clearance will be required for this role. Location: Woking Work Pattern: Flexible/Hybrid (A combination of home and office working) Key Responsibilities: Design, develop, and test software systems using Python, Java, or Kotlin and supporting Back End and Middleware frameworks Collaborate with cross-functional teams to integrate software into systems Conduct research to identify new techniques and technologies Analyze system performance and recommend improvements Prepare technical reports and presentations for clients and stakeholders Stay up-to-date with the latest developments in software engineering and related fields Essential Skills and Experience: Degree in Computer Science, Engineering, or a related field Proven experience in software development using Python, Java, or Kotlin Experience with SQL and NoSQL database systems Familiarity with Linux-based operating systems - Ubuntu, Centos/RHEL Experience with mobile operating systems - especially Android Knowledge of message brokering, serialisation and queuing systems Experience with microservices, containers and hosts Familiarity with Infrastructure as Code - Vagrant, Ansible and Terraform Experience with AWS and Azure Cloud Experience with Git and version control systems Desirable Skills and Experience: Experience with other programming languages such as C++ or JavaScript Familiarity with machine learning and artificial intelligence techniques Experience with simulation tools such as Simulink or Xilinx System Generator Knowledge of signal processing techniques Benefits: This blue chip employer offers a supportive and collaborative work environment, where you will have the opportunity to work on exciting and challenging projects. Benefits include: Hybrid working pattern (a combination of home and office working) Competitive salary and benefits package Comprehensive training and development opportunities Access to cutting-edge technology and resources Opportunities to work with leading experts in the field Apply now and I will call to discuss your situation and this role in more depth
24/04/2024
Full time
Software Engineer - SC Cleared Salary: £35,000 - £55,000 Dependent on experience We are currently seeking a skilled and experienced Software Engineer to join the team at a leading defence engineering consultancy. You will have a strong background in software development, with experience in Python, Java, or Kotlin and supporting Back End and Middleware frameworks. As a Software Engineer, you will be responsible for designing, developing, and testing software systems for a range of applications. You will work closely with our multidisciplinary team of engineers to deliver innovative solutions to complex problems. Please note - Security clearance will be required for this role. Location: Woking Work Pattern: Flexible/Hybrid (A combination of home and office working) Key Responsibilities: Design, develop, and test software systems using Python, Java, or Kotlin and supporting Back End and Middleware frameworks Collaborate with cross-functional teams to integrate software into systems Conduct research to identify new techniques and technologies Analyze system performance and recommend improvements Prepare technical reports and presentations for clients and stakeholders Stay up-to-date with the latest developments in software engineering and related fields Essential Skills and Experience: Degree in Computer Science, Engineering, or a related field Proven experience in software development using Python, Java, or Kotlin Experience with SQL and NoSQL database systems Familiarity with Linux-based operating systems - Ubuntu, Centos/RHEL Experience with mobile operating systems - especially Android Knowledge of message brokering, serialisation and queuing systems Experience with microservices, containers and hosts Familiarity with Infrastructure as Code - Vagrant, Ansible and Terraform Experience with AWS and Azure Cloud Experience with Git and version control systems Desirable Skills and Experience: Experience with other programming languages such as C++ or JavaScript Familiarity with machine learning and artificial intelligence techniques Experience with simulation tools such as Simulink or Xilinx System Generator Knowledge of signal processing techniques Benefits: This blue chip employer offers a supportive and collaborative work environment, where you will have the opportunity to work on exciting and challenging projects. Benefits include: Hybrid working pattern (a combination of home and office working) Competitive salary and benefits package Comprehensive training and development opportunities Access to cutting-edge technology and resources Opportunities to work with leading experts in the field Apply now and I will call to discuss your situation and this role in more depth