The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
18/04/2024
Full time
The Armament supervisor is responsible to the Armament lead and should be an experienced and skilled technician undertaking a range of detailed maintenance activities on aircraft equipment and/or aircraft components. The post holder should have an excellent understanding of the construct of the approved Technical Information set and is competent to supervise personnel who are working on maintenance instructions and in accordance with the organisation's Regulatory Framework and should be able to demonstrate a distinct ability to analyse and diagnose faults to equipment & assemblies, follow diagnostic procedures and work effectively within a team providing guidance to less experienced team members in a diverse and dynamic operational environment. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. In addition the Post Holder shall hold certain privileges delegated from the Maintenance Manager. RequirementsCore Activities: Undertake detailed maintenance, inspection and supervision activities of aircraft components. Assuring work carried out has been completed in accordance with the SOW/Work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management. Undertake and complete tasked maintenance & diagnostic activities on weapons systems/components which will include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Will be responsible for the operational output of each Component MRO Workshop under their control in line with agreed customer requirements. Post holder will also have responsibilities for the cost and schedule adherence of the component maintenance activities. Supervise team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme. Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management. Undertake support tasks within the component maintenance facility which are required to maintain compliance with the MOE and AMC procedures (eg oversight checks, control of tooling/test equipment etc.) Undertake fault evaluation and raise ad hoc work cards and for found faults' during maintenance. Ability to scope and carry out independent and vital inspections. Maintain personal & teams task authorisation for working on components in accordance with AMC requirements. Required to provide support and guidance, including allocation of tasks to appropriately authorised maintenance technicians. Provide effective leadership and supervision to team members under your direct supervision. Key Activities: Performance indicators - Ensure the effective management of Part 145 activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate. Completion of activities - Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Ensure the integration of Part 145 activity within the business, including the engagement of key stakeholders at all stages of the process. Provide support and guidance to the team(s). Procedure/standards - Manage the Part 145 team(s) compliance with the Part 145 Exposition, its associated procedures and standards, and any other Company procedures and standards, as applicable. Identify, propose and implement change as required, whilst ensuring compliance. Safety Management System - Promote the application of Human Factors, Error Management, Risk Management and Safety Assurance within the Part 145 team(s), together with the proactive analysis, mitigation and management of Hazards. Management System Assurance - Ensure Part 145 team(s) activities are compliant with the AM&S Governance and Assurance framework. Ensure Process Confirmations and independent assurance audits are supported by Part 145 personnel and integrated within/across teams. Manage the response to audit findings in a timely and appropriate manner and provide information into the relevant reviews. Generate and implement effective improvements within/across teams to overcome any non-compliance and monitor effectiveness. Statutory/Regulatory & Legislative requirements - Able to demonstrate a good understanding and application of the relevant Continuing Airworthiness Regulatory framework, and ensure any Regulatory-driven changes are implemented within the Part 145 team(s) activities. Ensure compliance with all other requirements, eg ITAR, EaPW, ISO, etc. Contractual Requirements - Ensure compliance with all applicable contractual requirements, eg through support to contract reviews, and ensure any changes are implemented into the Part 145 activities, as appropriate. Requirements: Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship/qualifications. Academic qualification for this role is a minimum of City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Experienced and competent leader at this level. Typically 2+ years' experience including type, classed as fully competent with all required 'Authorities' in place. Demonstrating breadth of experience, currency & recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of the Acceptable Means of Compliance. Management training. Leadership- Foundation. Human Factors- Standard Course Specification. E&PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. Benefits Competitive Basic Salary 25 Days Annual Leave Annual Bonus On site Parking Pension Scheme Life Assurance
Subject - FPGA Developer - Xilinx - VHDL - Paignton - Competitive Salary - Excellent Benefits! Job Title - FPGA Developer (Xilinx, VHDL) Benefits - Pension, Life Insurance, Health Care, Dental, Gym, Birthday Benefits, 25 days' annual leave, Fitness Classes & Progression Location - Paignton The Client - Curo are Partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The Candidate - This role would suit a candidate with demonstrable industry experience of VHDL Product Specification & Development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. We are looking for a candidate with Xilinx FPGAs as opposed to Altera FPGAs or ASICs. The successful candidate would will have relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment, as well as strong experience in digital electronics. The Role - The key focus of this role is FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. This will include providing support, and the future development of existing Embedded firmware applications. Key Duties - FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. Design test/verification and qualification. Support and future development of existing Spirent Embedded firmware applications. Provide engineering support to internal Supply Chain and Client Services departments. Participate in the maintenance and enhancement of FPGA design processes and practices. Contribute to the on-going development and maintenance of existing products and features. Produce clear documentation to support the integration, system verification, configuration and use of the FPGA features. Requirements - Honours degree in Electronic Engineering, Computer Engineering, Computer Science, or a similar discipline Demonstrable post-graduate related experience of VHDL project specification and development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. Relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment. Experience with Xilinx FPGAs as opposed to Altera FPGAs or ASICs is preferable. Strong experience in digital electronics. HDL designer. Modelsim verification. Precision synthesis tool. Vivado place and route. Embedded firmware soft/hard platforms: Motorola Coldfire, Xilinx Microblaze or similar S/W languages C, C++, Visual Basic, TCL, Perl. Compilers: EDK hardware platform, Greenhills. Operating systems: Real Time applications running under Linux or Windows. Experience in Digital Modulation techniques, GNSS, Communications theory, Signal Processing, Encryption processes and Matlab are all advantages. Initiative - step up and take action without being asked. Look for opportunities to make a difference. Resourcefulness - adapt to new/difficult situations and devise ways to overcome obstacles. Decisive, determined, and persistent - demonstrating both individual and collective ownership. Excellent interpersonal communication and analytical skills. Team player with a highly collaborative and positive attitude. Communicates effectively with the ability to work as part of a multi-site team. Good problem-solving skills coupled with a strong aptitude to learn and innovate. Organised and methodical but also a creative thinker. To apply for this FPGA Developer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
17/04/2024
Full time
Subject - FPGA Developer - Xilinx - VHDL - Paignton - Competitive Salary - Excellent Benefits! Job Title - FPGA Developer (Xilinx, VHDL) Benefits - Pension, Life Insurance, Health Care, Dental, Gym, Birthday Benefits, 25 days' annual leave, Fitness Classes & Progression Location - Paignton The Client - Curo are Partnering with a Global Company who deliver their B2B Customers cutting-edge technology. Their automated test and assurance solutions accelerate technology development in the lab, and ensure new products and services perform in the real world. Their innovative portfolio of products and services address the test, assurance, and automation challenges of a new generation of technologies: 5G, SD-WAN, Cloud, Autonomous Vehicles and beyond. The Candidate - This role would suit a candidate with demonstrable industry experience of VHDL Product Specification & Development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. We are looking for a candidate with Xilinx FPGAs as opposed to Altera FPGAs or ASICs. The successful candidate would will have relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment, as well as strong experience in digital electronics. The Role - The key focus of this role is FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. This will include providing support, and the future development of existing Embedded firmware applications. Key Duties - FPGA implementation from either internally generated design specifications or externally published Interface Control Documentation. Design test/verification and qualification. Support and future development of existing Spirent Embedded firmware applications. Provide engineering support to internal Supply Chain and Client Services departments. Participate in the maintenance and enhancement of FPGA design processes and practices. Contribute to the on-going development and maintenance of existing products and features. Produce clear documentation to support the integration, system verification, configuration and use of the FPGA features. Requirements - Honours degree in Electronic Engineering, Computer Engineering, Computer Science, or a similar discipline Demonstrable post-graduate related experience of VHDL project specification and development, test bench development and Scripting experience, working within a structured engineering environment that includes Requirements Analysis/Definition, Design/Implementation, Defect Tracking, and Testing. Relevant industrial experience and strong FPGA firmware programming skills using VHDL in a high-speed logic (>100MHz) environment. Experience with Xilinx FPGAs as opposed to Altera FPGAs or ASICs is preferable. Strong experience in digital electronics. HDL designer. Modelsim verification. Precision synthesis tool. Vivado place and route. Embedded firmware soft/hard platforms: Motorola Coldfire, Xilinx Microblaze or similar S/W languages C, C++, Visual Basic, TCL, Perl. Compilers: EDK hardware platform, Greenhills. Operating systems: Real Time applications running under Linux or Windows. Experience in Digital Modulation techniques, GNSS, Communications theory, Signal Processing, Encryption processes and Matlab are all advantages. Initiative - step up and take action without being asked. Look for opportunities to make a difference. Resourcefulness - adapt to new/difficult situations and devise ways to overcome obstacles. Decisive, determined, and persistent - demonstrating both individual and collective ownership. Excellent interpersonal communication and analytical skills. Team player with a highly collaborative and positive attitude. Communicates effectively with the ability to work as part of a multi-site team. Good problem-solving skills coupled with a strong aptitude to learn and innovate. Organised and methodical but also a creative thinker. To apply for this FPGA Developer permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
Electronic Engineer - Contract - Analogue and Digital Design - Onsite Cambridge (4 days a week) £60-£110 per hour depending on experience - Outside IR35 8 months Cambridge (working week 37 hours can be performed over 4 days a week onsite) Our client is seeking talented Electronic Engineer/Design Engineers with strong analogue and high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Contract duties include: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of digital baseband circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills required: Experience with Microprocessor and Microcontroller designs Experience with memory sub-systems - eg DDR, NAND, eMMC Experience of communication interfaces and buses - USB, SPI, I2C,MIPI Low power circuit design for battery powered products Experience interacting with SW teams at the device driver level Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector Desirable: Design work relating to radio products Experience of designing for signal integrity Experience with signal and power integrity simulation tools (eg Hyperlynx, Sigrity, ADS, etc.) Experience of high-speed communications interfaces and buses - eg Gigabit Ethernet, USB3.0, PCIe etc Experience of mobile phone/cellular
16/04/2024
Project-based
Electronic Engineer - Contract - Analogue and Digital Design - Onsite Cambridge (4 days a week) £60-£110 per hour depending on experience - Outside IR35 8 months Cambridge (working week 37 hours can be performed over 4 days a week onsite) Our client is seeking talented Electronic Engineer/Design Engineers with strong analogue and high-speed digital design experience to join an exciting critical communications device project. We are seeking Electronic Engineers with electronics design experience from initial concept, specification, and design through to software and systems integration, test, and manufacture. Contract duties include: Requirements analysis and understanding including liaison with stakeholders Technical design and specification of digital baseband circuitry for radio and accessory products Complete subsystem design and implementation, including subsystem ownership. Integration with RF, Audio and MMI subsystems. Component specification and sourcing Design, integration and test documentation Definition, implementation and supervision of PCB layout rules and constraints Resolution of design and integration issues Interaction with the SW team at device driver level (especially during bring-up phases) Production technical support including sub system test strategy. Skills required: Experience with Microprocessor and Microcontroller designs Experience with memory sub-systems - eg DDR, NAND, eMMC Experience of communication interfaces and buses - USB, SPI, I2C,MIPI Low power circuit design for battery powered products Experience interacting with SW teams at the device driver level Design for EMC/ESD protection Design for Manufacturing and Test Experience of electronics design for automotive, defence, aerospace, medical, mobile phone or similar regulated sector Desirable: Design work relating to radio products Experience of designing for signal integrity Experience with signal and power integrity simulation tools (eg Hyperlynx, Sigrity, ADS, etc.) Experience of high-speed communications interfaces and buses - eg Gigabit Ethernet, USB3.0, PCIe etc Experience of mobile phone/cellular
Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum + Car allowance VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
16/04/2024
Full time
Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum + Car allowance VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
Are you an apprentice graduate in electrical engineering or systems engineering, or perhaps an ex-Navy Weapons Engineer looking to transition your skills into a dynamic civilian role? Look no further! We have the perfect opportunity for you to propel your career in the direction of electrical and systems design. About our client: Join a forward-thinking company that values expertise and innovation. Defence experience isn't essential - your skills and potential are what matter most to us. Location: Portsmouth Role Overview: As a Systems Electrical Integration Specialist, you'll be at the forefront of cutting-edge projects, focusing on the integration of Commercial Off-The-Shelf (COTS) and MOD systems. Your responsibilities will span a range of OEM Systems, including Medium Calibre Guns, Sensors (Fire Control & Surveillance), Radar, Electronic Warfare Systems, and Combat Management Systems (CMS). What We're Looking For: Candidates emerging from an apprenticeship (HNC level) in electrical or systems engineering, or ex-Navy Weapons Engineers. Passion for electrical and systems design. Strong understanding of Electrical Systems/Engineering theory. Willingness to learn and adapt - while prior design experience isn't necessary, a desire to grow and develop within the role is essential. Key Responsibilities: Production of Installation Solution Packs, encompassing Electrical/System Drawings, Penetrations, Cable Data Sheets, Bill of Materials, and associated Installation Instructions. Collaborate with multidisciplinary teams to ensure seamless integration of systems. Drive innovation and efficiency in system integration processes. What our client offers: Comprehensive training on tools such as AutoCAD, SolidWorks, Foran, and more. Opportunities for professional growth and development. A supportive and collaborative work environment where your ideas are valued. Competitive compensation package with excellent benefits. Ready to Take the Next Step? If you're ready to embark on an exciting journey in systems electrical integration and contribute to ground-breaking projects, we want to hear from you! Please be advised this position will require the successful candidate to undergo SC Security Clearance. Apply now and unleash your potential with us.
16/04/2024
Full time
Are you an apprentice graduate in electrical engineering or systems engineering, or perhaps an ex-Navy Weapons Engineer looking to transition your skills into a dynamic civilian role? Look no further! We have the perfect opportunity for you to propel your career in the direction of electrical and systems design. About our client: Join a forward-thinking company that values expertise and innovation. Defence experience isn't essential - your skills and potential are what matter most to us. Location: Portsmouth Role Overview: As a Systems Electrical Integration Specialist, you'll be at the forefront of cutting-edge projects, focusing on the integration of Commercial Off-The-Shelf (COTS) and MOD systems. Your responsibilities will span a range of OEM Systems, including Medium Calibre Guns, Sensors (Fire Control & Surveillance), Radar, Electronic Warfare Systems, and Combat Management Systems (CMS). What We're Looking For: Candidates emerging from an apprenticeship (HNC level) in electrical or systems engineering, or ex-Navy Weapons Engineers. Passion for electrical and systems design. Strong understanding of Electrical Systems/Engineering theory. Willingness to learn and adapt - while prior design experience isn't necessary, a desire to grow and develop within the role is essential. Key Responsibilities: Production of Installation Solution Packs, encompassing Electrical/System Drawings, Penetrations, Cable Data Sheets, Bill of Materials, and associated Installation Instructions. Collaborate with multidisciplinary teams to ensure seamless integration of systems. Drive innovation and efficiency in system integration processes. What our client offers: Comprehensive training on tools such as AutoCAD, SolidWorks, Foran, and more. Opportunities for professional growth and development. A supportive and collaborative work environment where your ideas are valued. Competitive compensation package with excellent benefits. Ready to Take the Next Step? If you're ready to embark on an exciting journey in systems electrical integration and contribute to ground-breaking projects, we want to hear from you! Please be advised this position will require the successful candidate to undergo SC Security Clearance. Apply now and unleash your potential with us.
Tender Engineer/Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Tender Engineer/Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
15/04/2024
Full time
Tender Engineer/Technical Bid Specialist Permanent Hybrid into Staffordshire £55-65k per annum VIQU have partnered with a leader in automation, hardware and electronics space to find an experienced Tender Engineer. This role requires a experience in the industry where you have liaised and lead business tenders from pre-qualification and proposal documentation to identifying and detailing solutions, preparing cost estimates, and everything in between. Your previous experience in the control systems, protection, electrical engineering or hardware will aid you in making this a success. You will interpret the clients requirements, develop a solution and then identify suitable suppliers when required. Essential Experience required of a Tender Engineer/Technical Bid Specialist in this role: At least 5 years experience in a similar role (handling the full tendering cycle) Experience in Protection, control, Software, Hardware, or Electrical Engineering and a good understanding of an engineering process is paramount. Develop and foster relationships with both internal and external stakeholders Carrying out surveys on client sites as required to identify scope, scale, implementation philosophies, etc Liaising with 3rd party suppliers, produce subcontract specifications, in liaison with procurement, for providers to quote against and reviewing their tender returns for compliance and value. Producing detailed proposal documents that are well structured, contain the main selling messages and differentiators that give Capula the edge over our competitors. Ability to produce technically and commercially comprehensive proposal documents Ability to meet tight deadlines Understanding of the T&D and Energy sector and its associated standards, with a Protection bias Benefits: 25 days leave + BH Flex working Pension Life Insurance Private healthcare Salary sacrifice programme Mental health assistance Green car scheme Support in achieving professional engineering status if required To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Storm Robertson , by exploring the VIQU IT Recruitment website.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
15/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
15/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
Senior Connectivity Firmware/Test Engineer 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary (Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
15/04/2024
Project-based
Senior Connectivity Firmware/Test Engineer 1 year freelance contract + extensions after Leuven, Belgium (2 days remote per week) Within our Personal Health R&D group, we want to capture the strong market growth in ICs for hearing aids and implants, hearables, wearables, and personal health monitoring applications, health IoT. Owing to our success, our department of 40+ engineers is growing, and we have challenging opportunities for software engineers. Our System-on-Chip products employ the latest Bluetooth Smart (BLE) or NFC with our experience in ultra-low power design. We develop the full software stack from driver-level all to way to turnkey applications, enabling our customers to build their products with minimum effort. Description of services: Unconditionally technically responsible for a subsystem, application Estimate the effort for your work and contribute to reviewing the estimates of peers Execute feasibility studies to underpin the estimations Create a design for the software Organize or contribute to (mutual) reviews of designs with colleagues and Software Architect Plan your assignments and report on progress Contribute to specifying and developing automated regression test frameworks. Document functional and performance specifications, test design documentation and develop the test strategy and test specifications. Work with the development team to develop and guide the implementation of module, systems and end to end tests (functional + performance testing) to fit in the test framework. Develop test automations using Python, Jenkins. Experience: Master's degree in Software Engineering or Electronics or, have reached this level through another form of training or experience. 3-5 years Embedded software/firmware development experience, in either the mobile industry or in semiconductors. Proud software craftsman with solid BLE 5.X experience, preferably in both Link Layer and Host stack Natural team player and obsessive to learn and gain experience Spoken and written English Knowledge of design methods and software engineering processes, Microcontroller architectures and peripherals, Embedded programming in C. Strong Python programming skills Building Real Time systems on bare metal or using an RTOS, structured debugging, interpretation of PCB schematics. Practical experience using the Scrum framework Experience in technical coaching of junior team members Additional context of the role: Idea is to find a candidate with a strong BLE knowledge. The work to be done is to develop the upper level (application level) of the BLE communication protocol stack which are not yet existing. To do this, knowledge/understanding/experience of the lower levels is absolutely necessary (Link Layer and Host stack). The testing part of the job will be relatively limited to the beginning of the assignment. At that time 50% of the time should be spend within the R&D team which is currently struggling with the validation testing. Helping on this aspect will serve as an introduction to the product for the candidate. Finally, we want a senior profile as one of the tasks will be to lead the team in the "go to market strategy". The product till now is developed for use cases of specific customers but idea is to make it a mass product. The senior engineer should help here to identify what may be missing in the product to reach a broader audience, for example by comparison with competitors. This part will require again to interact with the R&D team.
Position Available : Systems Engineer (Electro-Optics) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices and similar. Knowledge of the technologies involved in Electro-Optical systems would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on Electro-Optics (EO) technologies through the provision of specialist EO design support. You will be responsible for driving the technical direction of our products to meet challenging customer requirements by engaging and coordinating with wider specialist design teams and external entities to ensure we successfully deliver on our commitments. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: Requirements analysis, specifications and justification System architecture design and modelling System trade studies to inform design decisions Technology maturation assessments and FMEA Development of interface definitions Systems proving, design assurance and certification Any experience in the following would be a bonus: Knowledge of the physics and technologies involved in Electro-Optical systems Experience of model based engineering techniques, including SysML Use of systems engineering tools (eg IBM DOORS Next, Rhapsody, etc) If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
12/04/2024
Full time
Position Available : Systems Engineer (Electro-Optics) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices and similar. Knowledge of the technologies involved in Electro-Optical systems would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on Electro-Optics (EO) technologies through the provision of specialist EO design support. You will be responsible for driving the technical direction of our products to meet challenging customer requirements by engaging and coordinating with wider specialist design teams and external entities to ensure we successfully deliver on our commitments. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: Requirements analysis, specifications and justification System architecture design and modelling System trade studies to inform design decisions Technology maturation assessments and FMEA Development of interface definitions Systems proving, design assurance and certification Any experience in the following would be a bonus: Knowledge of the physics and technologies involved in Electro-Optical systems Experience of model based engineering techniques, including SysML Use of systems engineering tools (eg IBM DOORS Next, Rhapsody, etc) If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Sensors & Navigation) Location : Gloucestshire (Hybrid) & Dynamic Working Hours Salary : Up to £48,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
12/04/2024
Full time
Position Available : Systems Engineer (Sensors & Navigation) Location : Gloucestshire (Hybrid) & Dynamic Working Hours Salary : Up to £48,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £48,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
12/04/2024
Full time
Position Available : Systems Engineer (Sensors & Navigation) Location : Hertfordshire (Hybrid) & Dynamic Working Hours Salary : Up to £48,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics, medical devices etc A basic understanding of project management is also needed for this role. Any experience with modelling tools such as MATLAB would be a bonus, but not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to work in our team who primarily focus on navigation and sensor technologies. In this role you will support the team in: Monitoring technology advancements and areas for innovation Collaborating with suppliers and researchers for technology development Designing and conducting laboratory tests Supporting team trials Conducting research and design activities Investigating engineering problems Project management What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Appreciation of system design & integration challenges Basic understanding of project management processes Modelling skills, including proficiency with tools such as MATLAB, is a bonus to have Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Position Available : Systems Engineer Team Lead (Modelling & Tools) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics and similar. We are looking for someone with a background in mathematical modelling and coding using tools such as MATLAB and Simulink who also has experience in model verification & validation, configuration control and release processes. Any prior experience of leading a team would be a bonus, although not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to join our Electro-Optical (EO) Seekers & Sensors Department as the Lead for our Modelling and Tools team. The work is broad, multifaceted, varied and dynamically changing. You will work within a highly skilled and experienced team that will support you in delivering our commitments. We will work with you to develop your skill, knowledge and experience, as well as supporting your professional development, all while ensuring a good work-life balance. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Mathematics, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: A background in mathematical modelling and coding using tools such as MathWorks MATLAB and Simulink Experience in model verification & validation, configuration control and release processes. Strong logical and analytical skills to address the technical nature of the work Team Leadership and People Management skills, or a desire to take on this responsibility Additionally, any of the following would be advantageous: Understanding of Electro-Optical radiation, propagation and detection principles, in particular in the infra-red waveband Experience of managing engineering work packages to deliver value outcomes, including co-ordination of other engineering disciplines and subject matter experts Experience of working in AGILE teams and applying AGILE frameworks If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
12/04/2024
Full time
Position Available : Systems Engineer Team Lead (Modelling & Tools) Location : Gloucestershire (Hybrid) & Dynamic Working Hours Salary : Up to £55,000 + Paid Overtime & Company Bonus & Very Good Pension Package Experience needed : Experience of systems engineering within a complex, high-technology engineering industry eg defence, aerospace, automotive, robotics, electronics and similar. We are looking for someone with a background in mathematical modelling and coding using tools such as MATLAB and Simulink who also has experience in model verification & validation, configuration control and release processes. Any prior experience of leading a team would be a bonus, although not essential. About the role We are a leading defence company who are at the forefront of innovation in the industry and your work will have a direct impact on the safety and security of the UK & our allies. We are currently looking for a Systems Engineer to join our Electro-Optical (EO) Seekers & Sensors Department as the Lead for our Modelling and Tools team. The work is broad, multifaceted, varied and dynamically changing. You will work within a highly skilled and experienced team that will support you in delivering our commitments. We will work with you to develop your skill, knowledge and experience, as well as supporting your professional development, all while ensuring a good work-life balance. What we need from you: Degree qualified in a relevant engineering discipline (Physics, Electronics, Systems, Mathematics, Aerospace or similar) Experience in a relevant engineering industry Experience with good systems engineering practices Good written and verbal communication and presentation skills Good analytical and problem-solving skills Able to plan and control your work A well-rounded Systems Engineer with experience across the full life cycle, including: A background in mathematical modelling and coding using tools such as MathWorks MATLAB and Simulink Experience in model verification & validation, configuration control and release processes. Strong logical and analytical skills to address the technical nature of the work Team Leadership and People Management skills, or a desire to take on this responsibility Additionally, any of the following would be advantageous: Understanding of Electro-Optical radiation, propagation and detection principles, in particular in the infra-red waveband Experience of managing engineering work packages to deliver value outcomes, including co-ordination of other engineering disciplines and subject matter experts Experience of working in AGILE teams and applying AGILE frameworks If you would like to know more details about the position or want to register your interest, hit apply below. We'd love to hear from you!
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
12/04/2024
Full time
Exciting Opportunity for an Electronics Engineer (Embedded DSP) at a Leading Company! Are you a passionate Embedded DSP Engineer looking to take your career to the next level? Lynx Recruitment is looking for an Electronics Engineer (Embedded DSP) to join our client's dynamic team and be at the forefront of developing cutting-edge systems. We are seeking a talented individual with 3+ years of experience as an Electronics/DSP Engineer or in a similar role. The ideal candidate must be well-versed in OFDM technologies, Forward Error Correction methods, and have a strong background in signal processing theory, algorithms, and implementation techniques. Expertise in Embedded code for timing-critical applications and DSP implementation on small microcontrollers and FPGAs is essential. As an Electronics Engineer (Embedded DSP), you will have the unique opportunity to: Take their established Wireline telemetry system to the next generation Maintain and develop the design Participate in code review and perform other programming tasks Provide troubleshooting assistance and technical support to team members Requirements: Proficiency in programming languages such as C/C++ and VHDL Proficiency in modelling packages such as Matlab or Octave Strong ability to write structured code and clear documentation Excellent analytical, problem-solving, and communication skills If you thrive in a collaborative environment and have a passion for innovation, we want to hear from you! Join our client's team and be part of a group that is pushing the boundaries of Wireline telemetry technology. Please apply now with an up to date CV! Don't miss this exciting opportunity to join a leading company and make a real impact in the industry!
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!
12/04/2024
Full time
Lead Electronics Engineer Opportunity at a Pioneering Technology Firm! Lynx Recruitment is working with a leading company in Bath to recruit a Lead Electronics Engineer. You will spearhead a talented team and deliver cutting-edge solutions to complex challenges. The ideal candidate will possess in-depth knowledge and experience across a wide range of electronics disciplines. If you have a proven track record of designing and testing power electronics, motor control, high-speed electronics, analogue, digital, and sensing technology, this could be the perfect role for you! As a Lead Electronics Engineer, you will: Understand, maintain, and expand the capability of their proprietary OFDM telemetry system and communications bus protocols Lead the development of Embedded firmware in small microprocessors and FPGAs Oversee the design of a wide range of electronics hardware in both analogue and digital domains Assist in creating design requirements and specification documents Identify technical risks and propose mitigation strategies Provide technical coaching and guidance to other engineers Drive the development, implementation, and improvement of the internal design process Represent the development team in client meetings Requirements: BA or higher in Electrical or Electronics Engineering 7+ years as an Electronics Engineer or similar role developing new products 3+ years in a technical or project lead role Strong understanding of OFDM communications theory Expertise in analogue and digital hardware integration, Embedded software, Digital Signal Processing, and more Proficiency in programming languages such as C and VHDL Excellent problem-solving, communication, and presentation skills Don't miss this exciting opportunity to take your career to the next level and make a lasting impact in a pioneering technology firm! Please apply now with an up to date CV!