Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
23/04/2024
Full time
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
23/04/2024
Full time
Quality Engineer Coventry Full time Permanent Role Our client, a world-leading automotive engineering and manufacturing company based in Coventry, is looking to hire a Quality Engineer on a Full time permanent basis. This role presents an excellent opportunity to join the quality team of an innovative industry leader, which is equipped with state-of-the-art manufacturing technologies and processes. As the Quality Engineer, your core objective will be to ensure effective quality control throughout the manufacturing operations. Key duties and responsibilities include: Developing and implementing inspection plans, procedures, performance standards, and control methodologies to adhere to internal quality guidelines and industry regulations Conducting risk-based thinking assessments on operational processes to determine quality assurance requirements Performing process capability and analytical studies to identify areas for defect reduction and quality improvement Working closely with cross-functional teams including manufacturing, procurement, and suppliers to drive quality culture throughout the supply chain ecosystem Capturing, monitoring, and analysing quality data to identify trends and deviations from set targets Driving continuous improvement projects by employing methods like 8D problem-solving and Six Sigma Creating management reports and dashboards that communicate key quality metrics to senior leadership Staying current with advancements in quality engineering disciplines, inspection technologies, automation solutions etc. The ideal candidate will have hands-on experience working within quality-focused manufacturing operations, preferably in the automotive industry. You should also demonstrate sharp analytical abilities, communication skills, leadership qualities and a passion for devising quality assurance strategies. This is a fantastic opportunity to take on an important quality role within a pioneering mobility manufacturer. If you meet the above profile and are keen to apply, please send your CV to (see below)
Position: Technical Consultant (Manufacturing) Location: NW, NE, and South of England Salary: £45,000 - £70,000 Do you want to work for one of the largest consultancies in the world? Our client, a global leader in technology, is seeking ambitious individuals who are passionate about consulting and digital transformation to join their dynamic team. If you have a drive for innovation and a desire to make a real impact on high-profile projects within the Aerospace and Defence sectors, then this opportunity is for you. Role Overview: Work closely with clients to understand their unique challenges and translate digital concepts into actionable solutions. Lead the development and implementation of cutting-edge digital transformation strategies for top Defence organizations. Collaborate with cross-functional teams, including Manufacturing and Digital Engineering, to leverage digital technologies and drive comprehensive improvements. Take on a key role in strategic planning, project analysis, and thought leadership, ensuring a rewarding and intellectually stimulating experience. Your Skills and Experience: Proven track record of success in a consulting environment, with the ability to engage stakeholders and deliver impactful solutions. Background in digital manufacturing, preferably within Aerospace/Defence Manufacturing. Experience with IoT data analytics, manufacturing execution systems, PLM, and digital twin technologies is highly desirable. Security Clearance: Candidates must have or be eligible for Security Clearance to work in Defence and Security Industries in the UK. Why Join Them? Be part of a global leader at the forefront of technological innovation. Opportunity to work on exciting and challenging projects that shape the future of digital manufacturing. Collaborative and supportive work environment that encourages professional growth and development. If you're passionate about consulting, eager to tackle complex challenges, and ready to drive digital transformation in the Aerospace and Defence sectors, apply now and be part of something truly transformative. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
22/04/2024
Full time
Position: Technical Consultant (Manufacturing) Location: NW, NE, and South of England Salary: £45,000 - £70,000 Do you want to work for one of the largest consultancies in the world? Our client, a global leader in technology, is seeking ambitious individuals who are passionate about consulting and digital transformation to join their dynamic team. If you have a drive for innovation and a desire to make a real impact on high-profile projects within the Aerospace and Defence sectors, then this opportunity is for you. Role Overview: Work closely with clients to understand their unique challenges and translate digital concepts into actionable solutions. Lead the development and implementation of cutting-edge digital transformation strategies for top Defence organizations. Collaborate with cross-functional teams, including Manufacturing and Digital Engineering, to leverage digital technologies and drive comprehensive improvements. Take on a key role in strategic planning, project analysis, and thought leadership, ensuring a rewarding and intellectually stimulating experience. Your Skills and Experience: Proven track record of success in a consulting environment, with the ability to engage stakeholders and deliver impactful solutions. Background in digital manufacturing, preferably within Aerospace/Defence Manufacturing. Experience with IoT data analytics, manufacturing execution systems, PLM, and digital twin technologies is highly desirable. Security Clearance: Candidates must have or be eligible for Security Clearance to work in Defence and Security Industries in the UK. Why Join Them? Be part of a global leader at the forefront of technological innovation. Opportunity to work on exciting and challenging projects that shape the future of digital manufacturing. Collaborative and supportive work environment that encourages professional growth and development. If you're passionate about consulting, eager to tackle complex challenges, and ready to drive digital transformation in the Aerospace and Defence sectors, apply now and be part of something truly transformative. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Job Title: Mechanical Design Engineer Location: Peterborough Duration: Contract Pay Rate: £35/hr. Inside IR35 To work for a global leader in petrol and diesel engine manufacturing that offers the widest choice of dependable, cutting-edge power solutions customised to our clients' exact specifications, iO Associates is seeking a Mechanical Design Engineer. Through a global network of distributors and dealers, they provide engines, parts, and service support to the agricultural, construction, industrial, power generating, rental, material handling, and marine sectors. As a team they produce a wide variety of designs (including couplings, flywheels, engine rigging schemes, rigging equipment, canopies, building layouts and many more) to support multi-platform engine testing in ERDC. Many of their designs are bespoke and follow the Caterpillar design practices. Type of work can be a simple design job like designing a plate to designing complex equipment for test bed upgrades and engine testing. Required Skills CREO and Teamcenter proficiency for design. Basic AutoCAD. Relevant calculations where necessary. (Bolts stress calculations, Shaft suitability etc) Lead design reviews and participate in design discussions and reviews. Wider system knowledge. (Example: - coupling design (Impact of inertia), Look at the bigger picture) Built in safety as part of design. Conducting FMEA, SFMEA & safety risk assessments. Approachable and friendly with a focus on efficiency and velocity. This is an urgent requirement, so if this is of interest, please reply with an up to date CV for more info.
19/04/2024
Project-based
Job Title: Mechanical Design Engineer Location: Peterborough Duration: Contract Pay Rate: £35/hr. Inside IR35 To work for a global leader in petrol and diesel engine manufacturing that offers the widest choice of dependable, cutting-edge power solutions customised to our clients' exact specifications, iO Associates is seeking a Mechanical Design Engineer. Through a global network of distributors and dealers, they provide engines, parts, and service support to the agricultural, construction, industrial, power generating, rental, material handling, and marine sectors. As a team they produce a wide variety of designs (including couplings, flywheels, engine rigging schemes, rigging equipment, canopies, building layouts and many more) to support multi-platform engine testing in ERDC. Many of their designs are bespoke and follow the Caterpillar design practices. Type of work can be a simple design job like designing a plate to designing complex equipment for test bed upgrades and engine testing. Required Skills CREO and Teamcenter proficiency for design. Basic AutoCAD. Relevant calculations where necessary. (Bolts stress calculations, Shaft suitability etc) Lead design reviews and participate in design discussions and reviews. Wider system knowledge. (Example: - coupling design (Impact of inertia), Look at the bigger picture) Built in safety as part of design. Conducting FMEA, SFMEA & safety risk assessments. Approachable and friendly with a focus on efficiency and velocity. This is an urgent requirement, so if this is of interest, please reply with an up to date CV for more info.
Junior Surveillance Mechanical Engineer On-site Somerset - Opportunity to WFH 1 day per week Day Rate £450 - £509 Inside IR35 Around 6 months Responsibilities: . Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning . Ensure the surveillance plan is respected . Review the Follow up Documents and End of Installation reports . Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures ) . Organize your own schedules of surveillance activities with the surveillance leader . Contribute to open points treatments and closure . Participate to progress meetings with installation, projects, suppliers or customers Skills: . Min 1 year experience with technical degree qualification . Manufacturing processes knowledge (welding, foundry, forge ) . Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge . Quality fundamentals knowledge . Ability to read and understand the technical engineering documents of scheme . Fluent English (spoken and written) . Organisation . Capability to defend and explain own observations . Being critical and analytical minded to be able to identify deviations and to contribute to their resolution . Autonomy to manage the surveillance on-site schedule or business trip . Team working . Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. . Knowledge in welding or non destructive testing - desirable. . Training: several months training periods on various localisation in France and Europe. . Some out of hours working will be required
19/04/2024
Project-based
Junior Surveillance Mechanical Engineer On-site Somerset - Opportunity to WFH 1 day per week Day Rate £450 - £509 Inside IR35 Around 6 months Responsibilities: . Ensure the conformity to the purchase order requirements at each step of the key installation steps, from reception to commissioning . Ensure the surveillance plan is respected . Review the Follow up Documents and End of Installation reports . Verify the approval and completeness of the applicable technical documentation set (welding book, non-destructive testing procedures, installation procedures ) . Organize your own schedules of surveillance activities with the surveillance leader . Contribute to open points treatments and closure . Participate to progress meetings with installation, projects, suppliers or customers Skills: . Min 1 year experience with technical degree qualification . Manufacturing processes knowledge (welding, foundry, forge ) . Destructive (chemical or mechanical testing) and non destructive testing (PT, UT, RT, EC, MT) knowledge . Quality fundamentals knowledge . Ability to read and understand the technical engineering documents of scheme . Fluent English (spoken and written) . Organisation . Capability to defend and explain own observations . Being critical and analytical minded to be able to identify deviations and to contribute to their resolution . Autonomy to manage the surveillance on-site schedule or business trip . Team working . Master's degree qualification in Science, with specialisation in Metallurgy, Material, Advanced Mechanics or general mechanical engineering. . Knowledge in welding or non destructive testing - desirable. . Training: several months training periods on various localisation in France and Europe. . Some out of hours working will be required
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
18/04/2024
Project-based
Build Inspector - Inside IR35 - £26 per hour - BPSS Cleared (Or Willing to Undergo) - 12 Months (extension likely) - 37 Hours (Mon to Fri) - Stevenage - Single Stage Interview Yolk Recruitment are recruiting for a Build Inspector to join our client in advanced engineering on a 12 -month deal from Stevenage. Responsibilities: Carry on hardware in line and final inspections. (Visual inspection, measurement inspection, electrical testing) Provide technical comment and advice to the Spacecraft Production team regarding quality control, calling upon any specialist knowledge as appropriate. Support Spacecraft Production operators/technicians in deciding on the severity of an incident or any go/no-go decisions that may be needed. Advise and if required support the Spacecraft Production team leader on quality matters. Review Spacecraft Production work instructions for technical integrity, regarding product quality requirements and standards, whether specific or more general. If needed, reject and assist manufacturing in the correction of errors. Review drawings as needed in support of a work instruction review. Verify Spacecraft Production work instructions for adequate quality coverage through Quality Verification Points. If needed reject and assist manufacturing in the correction of errors. Perform patrol inspection, not limited to the inspection of documentation and hardware but including Spacecraft. Production process application, and also the controls and disciplines of the workshop such as: Cleanliness Tool calibration Training records Request and/or carry out a process audit as and when necessary AIT process 'spot checks' Skills/Experience Required: Essential: Right attitude to adapt with the essential skills and experiences in a manufacturing environment is as much valued as experience in a quality role. 2 years in a manufacturing business Knowledge on composite/carbon and/or electrical testing Willingness to work on shift, on-call or off-site for short periods when required - also on an occasional basis Desirable: ESA qualification would be a plus Recognised time served apprenticeship within the aerospace industry Experience within the aerospace or related industries. Science based or electronics GCSEs Experience with CMM would be a plus Experience with 3D drawings (CATIA) would be a plus
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
18/04/2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
18/04/2024
Full time
Job Title: CNC Grinder Setter Operator Department: Production Reporting to: Production Supervisor Due to their continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Grinder Setter Operator to support Production. Our client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, they can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. We believe that good customer service is every bit as important as a strong product. Duties and responsibilities include: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Use of manual measuring equipment Produce programmes on the machine as and when new products arrive Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Machines include: Jones & Shipman 1300X, Studer S40, Studer S145, Jones & Shipman Techmaster 634 surface grinder Actively provide details of changes to correct/improve production of parts towards improving machining performance Help and assist other members of the grinding cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required The ideal candidate must have/skills required: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player Experience in the following areas will be required: 3-5 Years relevant production experience Experience of Grinding Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs Desirable: Experience of a high-quality Manufacturing environment Writing & editing CNC Grinding programs. Excellent communication skills Good time management
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
18/04/2024
Full time
CNC MILLER SETTER OPERATOR REPORTING TO: PRODUCTION MANAGER Due to my client's continued expansion and strong product portfolio across both motorsport and future automotive, we are looking to recruit a CNC Miller Setter Operator to support Production. My client is relied upon by many of the world's top motorsport teams, performance car constructors, hybrid and electric transportation innovators to extract the performance and reliability they require to get their high-performance transmission challenges done. Whatever the nature of your next motorsport or vehicle engineering project might be, my client can help with off-the shelf and bespoke solutions along with design consulting and manufacturing expertise. At my client, we believe that good customer service is every bit as important as a strong product. DUTIES AND RESPONSIBILITIES INCLUDE: Cleanliness of work station and maintenance of machines while during and at the end of their shift in line with company TPM Schedule Reading and interpreting engineering drawings Setting and operating milling machines to required tolerance Use of manual measuring equipment Tool setting on CNC Machines Programme proving of new products as and when required. Actively provide details of changes to correct/improve programs that go towards improving machining performance Loading and unloading parts onto machines Maintain notes (machine log book) on current process identifying any issues for following shift Use of Fanuc controls Tapping and Deburring where required Help and assist other members of the milling cell when required Following daily work to do lists to follow the production schedule issued by Team Leader Take care not to cause harm to yourself, a colleague, visitors, customers or contractors Adhere to all quality, Health and Safety and environmental policies, manuals, objectives, process, procedures and work instructions Actively participate in the [COMPANY] Think Smart/Safe programme Wear appropriate personal protective equipment (PPE) - be accountable for notifying Health and Safety when in need of replacements Liaising with production engineering, design and inspection as and when required Any additional tasks required THE IDEAL CANDIDATE MUST HAVE/SKILLS REQUIRED: Attention to detail Initiative Can-do attitude Confidentiality Customer Service Focus Team player EXPERIENCE IN THE FOLLOWING AREAS WILL BE REQUIRED: 3-5 Years relevant production experience Experience of Milling Operations Willing to work shifts and unsociable hours High attention to detail Required to work overtime in line with company needs DESIRABLE: Experience of a high-quality Manufacturing environment Have previously run Matsuura 3-4-5 axis milling machines or similar Minor Fanuc programme editing Excellent communication skills Good time management
Join a leader in the oilfield services sector, seeking a meticulous Quality Control Specialist to enhance their quality assurance processes. This role offers a chance to contribute significantly to ensuring product excellence. The project aims to enhance quality control for parts, assemblies, and subassemblies, ensuring they surpass design and manufacturing standards. The goal is to maintain the highest quality and efficiency across all operations. Title: Quality Control Specialist Location: Aberdeen (Bridge of Don) Duration: 3 months (High possibility of extension) Salary: up to £32/hr, dependent upon experience Working Arrangement: Monday to Thursday 8 to 5, Friday 8 to 1 pm (1 day work from home possible) Skills Required: Visual, dimensional, and NDE inspection skills. Ability to interpret technical documents. NDE certification. Experience with SAP and quality management systems. Leadership skills for quality control teams. Responsibilities: Conduct and oversee quality inspections. Participate in HSE programs; maintain a safe work environment. Collaborate with engineering and management teams. Manage inspection records and initiate non-conformance reports. Supervise and mentor the quality control team. This position is an excellent opportunity for those looking to impact the oilfield services industry through quality control. Competitive pay, flexible working arrangements, and the chance for extension make this role attractive for professionals seeking growth.
18/04/2024
Project-based
Join a leader in the oilfield services sector, seeking a meticulous Quality Control Specialist to enhance their quality assurance processes. This role offers a chance to contribute significantly to ensuring product excellence. The project aims to enhance quality control for parts, assemblies, and subassemblies, ensuring they surpass design and manufacturing standards. The goal is to maintain the highest quality and efficiency across all operations. Title: Quality Control Specialist Location: Aberdeen (Bridge of Don) Duration: 3 months (High possibility of extension) Salary: up to £32/hr, dependent upon experience Working Arrangement: Monday to Thursday 8 to 5, Friday 8 to 1 pm (1 day work from home possible) Skills Required: Visual, dimensional, and NDE inspection skills. Ability to interpret technical documents. NDE certification. Experience with SAP and quality management systems. Leadership skills for quality control teams. Responsibilities: Conduct and oversee quality inspections. Participate in HSE programs; maintain a safe work environment. Collaborate with engineering and management teams. Manage inspection records and initiate non-conformance reports. Supervise and mentor the quality control team. This position is an excellent opportunity for those looking to impact the oilfield services industry through quality control. Competitive pay, flexible working arrangements, and the chance for extension make this role attractive for professionals seeking growth.