We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
25/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
Technical Operator (Water Industry) Hours: 40 Hours per week, plus standby duty Location: Hampton Loade Bridgenorth Saray: £31,600 per annum About Us: At South Staffs Water, we deliver clean and reliable water supplies to around 1.7 million customers within the South Staffs and Cambridge regions. As a water only Company, providing clean, healthy water 24 hours a day, 365 days a year is at the very heart of what we do and that's where you come in. The role: As part of the role, you will work closely with a range of internal and external contacts on a daily basis. You will be responsible for maintaining the control and operation of strategic source water sites and will be required to manage your time effectively to complete a demanding schedule of plant maintenance activities. • Conduct basic electrical tasks. • Knowledge and application of technical skills to operate, maintain, improve, and repair equipment. • Maintain control and oversee the operation of strategic source water sites. • Effectively manage your time to complete a demanding schedule of plant maintenance activities. • Demonstrate an understanding of the principles of site design and operation. • Utilise appropriate safety and environmental procedures for people, processes, materials, products, and equipment to ensure a safe working environment for the entire team. • Ensure that all aspects of quality within the area of responsibility adhere to local quality procedures. • Attend to site and equipment breakdowns to safely restore plant supply. What you'll need • HNC level (or equivalent) in Electrical Engineering or alternatively equivalent relevant experience is desirable but not essential. • An electrical background in the utilities or similar industry is essential to the role; a Water industry background is desirable. • Computer literate (Excel, Word, Outlook) • Full driving licence • Health and safety are a priority for all members of the production team. You will have experience of reviewing risk assessments and are always confident to challenge and enforce safe working practices. Essential training will be provided which will help you gain the confidence within the operational area. What you'll get in return • Competitive Salary of £31,600 per annum • Company pension with employer contribution. • Store discount for personal shopping needs. • 24-hour helpline providing free and confidential advice to you and your family on financial, legal, marital and health.
24/04/2024
Full time
Technical Operator (Water Industry) Hours: 40 Hours per week, plus standby duty Location: Hampton Loade Bridgenorth Saray: £31,600 per annum About Us: At South Staffs Water, we deliver clean and reliable water supplies to around 1.7 million customers within the South Staffs and Cambridge regions. As a water only Company, providing clean, healthy water 24 hours a day, 365 days a year is at the very heart of what we do and that's where you come in. The role: As part of the role, you will work closely with a range of internal and external contacts on a daily basis. You will be responsible for maintaining the control and operation of strategic source water sites and will be required to manage your time effectively to complete a demanding schedule of plant maintenance activities. • Conduct basic electrical tasks. • Knowledge and application of technical skills to operate, maintain, improve, and repair equipment. • Maintain control and oversee the operation of strategic source water sites. • Effectively manage your time to complete a demanding schedule of plant maintenance activities. • Demonstrate an understanding of the principles of site design and operation. • Utilise appropriate safety and environmental procedures for people, processes, materials, products, and equipment to ensure a safe working environment for the entire team. • Ensure that all aspects of quality within the area of responsibility adhere to local quality procedures. • Attend to site and equipment breakdowns to safely restore plant supply. What you'll need • HNC level (or equivalent) in Electrical Engineering or alternatively equivalent relevant experience is desirable but not essential. • An electrical background in the utilities or similar industry is essential to the role; a Water industry background is desirable. • Computer literate (Excel, Word, Outlook) • Full driving licence • Health and safety are a priority for all members of the production team. You will have experience of reviewing risk assessments and are always confident to challenge and enforce safe working practices. Essential training will be provided which will help you gain the confidence within the operational area. What you'll get in return • Competitive Salary of £31,600 per annum • Company pension with employer contribution. • Store discount for personal shopping needs. • 24-hour helpline providing free and confidential advice to you and your family on financial, legal, marital and health.
Endeavour Recruitment has an excellent contract opportunity for a First Article Inspection Engineer with manufacturing experience to join a leading defence client based onsite in Bolton. Eligibility for Security Clearance is mandatory. Duties: Conduct First Article Inspection (FAI) activities as part of the delivery of the Industrial Validation plans ensuring that Manufacturing and related processes are applied across all projects and to help review supplier FAIs to ensure they meet requirements. This is a challenging Subject Matter Expert' role that requires a highly technical mind set and a considerable level of attention to detail. It will offer variety across several key topics within the Manufacturing environment and will offer you the chance to make a significant contribution to product safety, continual improvement, and our business reputation. Undertake preparation of First Article Inspections activities through the analysis of the manufacturing data-pack and understanding of the associated processes, gathering all the necessary information required. Produce First Article Inspection reports by auditing and analysing the operations and processes being conducted in the relevant manufacturing area. Identify non-conformances and areas for improvement during the FAI process ensuring the relevant IAR (improvement Action Requests) are managed to satisfactory closure. Carry out the compilation of First Article Inspection Reports (FAIRs) detailing findings from FAI conducted. Provide technical and process support to manufacturing to support closure of non-conformances ensuring that the necessary actions have been implemented to prevent recurrence of the issues. Conduct reviews of Supplier FAIRs ensuring they meet the requirements placed, liaising with the Industrial manufacturing engineers to help resolve any issues identified to release the parts for use in production. Required skills: Qualified to minimum HNC/HND in relevant subject ideally. Quality Audit experience required. Extensive knowledge and experience of EN/AS9100 and EN/AS9102. Experience in the compilation of FAI reports. Excellent interpersonal skills. Capability to identify sustainable business improvements & ensure effective implementation. Recognise and understand internal and external customer requirements and respond to them. Planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives. Experience in the compilation of FAI reports detailing findings from FAI conducted. Does the above match your experience and expectations? Please get in touch for further details!
24/04/2024
Project-based
Endeavour Recruitment has an excellent contract opportunity for a First Article Inspection Engineer with manufacturing experience to join a leading defence client based onsite in Bolton. Eligibility for Security Clearance is mandatory. Duties: Conduct First Article Inspection (FAI) activities as part of the delivery of the Industrial Validation plans ensuring that Manufacturing and related processes are applied across all projects and to help review supplier FAIs to ensure they meet requirements. This is a challenging Subject Matter Expert' role that requires a highly technical mind set and a considerable level of attention to detail. It will offer variety across several key topics within the Manufacturing environment and will offer you the chance to make a significant contribution to product safety, continual improvement, and our business reputation. Undertake preparation of First Article Inspections activities through the analysis of the manufacturing data-pack and understanding of the associated processes, gathering all the necessary information required. Produce First Article Inspection reports by auditing and analysing the operations and processes being conducted in the relevant manufacturing area. Identify non-conformances and areas for improvement during the FAI process ensuring the relevant IAR (improvement Action Requests) are managed to satisfactory closure. Carry out the compilation of First Article Inspection Reports (FAIRs) detailing findings from FAI conducted. Provide technical and process support to manufacturing to support closure of non-conformances ensuring that the necessary actions have been implemented to prevent recurrence of the issues. Conduct reviews of Supplier FAIRs ensuring they meet the requirements placed, liaising with the Industrial manufacturing engineers to help resolve any issues identified to release the parts for use in production. Required skills: Qualified to minimum HNC/HND in relevant subject ideally. Quality Audit experience required. Extensive knowledge and experience of EN/AS9100 and EN/AS9102. Experience in the compilation of FAI reports. Excellent interpersonal skills. Capability to identify sustainable business improvements & ensure effective implementation. Recognise and understand internal and external customer requirements and respond to them. Planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives. Experience in the compilation of FAI reports detailing findings from FAI conducted. Does the above match your experience and expectations? Please get in touch for further details!
Required for a key project with a leading automotive manufacturer, an expert Embedded SW engineer, steeped in autonomous driving development and programmable chip-sets. Required Experience: - Embedded software development - C/C++ - AUTOSAR adaptive - TDA3 or TDA4 - Jacinto (TI) - QNX Hypervisor The ideal candidate will have implemented and configured AUTOSAR, worked in low-level development of the SOC and safety-critical environments. To discuss the role in further detail, please email CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
24/04/2024
Project-based
Required for a key project with a leading automotive manufacturer, an expert Embedded SW engineer, steeped in autonomous driving development and programmable chip-sets. Required Experience: - Embedded software development - C/C++ - AUTOSAR adaptive - TDA3 or TDA4 - Jacinto (TI) - QNX Hypervisor The ideal candidate will have implemented and configured AUTOSAR, worked in low-level development of the SOC and safety-critical environments. To discuss the role in further detail, please email CV to (see below) WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
We are currently looking for a PriceFx Domain Consultant to work in the UK. We are looking for someone with PriceFx functional & technical experience & skills to deliver implementation & integration projects for oil & gas, manufacturing or other industry clients The Domain Consultant will Work closely with Business and IT to discuss business requirements, challenges & expectations, generate innovative approaches to existing Other duties include: problems or new opportunities Responsible for identifying and documenting the business needs of clients Work on assigned projects to bring valuable business domain, technical and application knowledge Set up & Configure PriceFx modules like price setting, quoting, analytics, price optimization, rebates based on business & functional requirements to deliver desired outcome Describe pricing module & technology in terms easily understood by business customers and set realistic customer expectations for the project outcome Capture business problems, value drivers, functional and non-functional requirements, including health, safety, security, usability, data, supportability considerations Assess and model processes, data flows, and technology to understand the current gaps and issues, opportunities for improvement, create clear documentation requirement, design documentations Keep updated to align with the solution over the project life cycle of implementation, integration, enhancement, managed services Ensure traceability of requirements from business needs and requirements, through testing and scope changes, to final solution Configure and document software and processes, using agreed standards and tools Create acceptance criteria and validate that solutions meet business needs through defining and coordinating testing Perform Unit, System Integration and E2E process testing for new enhancements, projects Perform or facilitate change management communication to the user community on future IT solution changes (ie raise change ticket) Guide business stakeholders to gain acceptance/sign-off What we're looking for Engg, Engg+MBA PriceFx Trained or certified Configuration Engineer PriceFx trained business user, data migration and integration engineer 5-10+ years of industry experience in PriceFx implementation, integration with at least 1-2 end to end implementation experience Excellent written and oral communication, stakeholder engagement
24/04/2024
Project-based
We are currently looking for a PriceFx Domain Consultant to work in the UK. We are looking for someone with PriceFx functional & technical experience & skills to deliver implementation & integration projects for oil & gas, manufacturing or other industry clients The Domain Consultant will Work closely with Business and IT to discuss business requirements, challenges & expectations, generate innovative approaches to existing Other duties include: problems or new opportunities Responsible for identifying and documenting the business needs of clients Work on assigned projects to bring valuable business domain, technical and application knowledge Set up & Configure PriceFx modules like price setting, quoting, analytics, price optimization, rebates based on business & functional requirements to deliver desired outcome Describe pricing module & technology in terms easily understood by business customers and set realistic customer expectations for the project outcome Capture business problems, value drivers, functional and non-functional requirements, including health, safety, security, usability, data, supportability considerations Assess and model processes, data flows, and technology to understand the current gaps and issues, opportunities for improvement, create clear documentation requirement, design documentations Keep updated to align with the solution over the project life cycle of implementation, integration, enhancement, managed services Ensure traceability of requirements from business needs and requirements, through testing and scope changes, to final solution Configure and document software and processes, using agreed standards and tools Create acceptance criteria and validate that solutions meet business needs through defining and coordinating testing Perform Unit, System Integration and E2E process testing for new enhancements, projects Perform or facilitate change management communication to the user community on future IT solution changes (ie raise change ticket) Guide business stakeholders to gain acceptance/sign-off What we're looking for Engg, Engg+MBA PriceFx Trained or certified Configuration Engineer PriceFx trained business user, data migration and integration engineer 5-10+ years of industry experience in PriceFx implementation, integration with at least 1-2 end to end implementation experience Excellent written and oral communication, stakeholder engagement
Coating Technician, Full-Time on-site in Leicestershire. Up to £29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development. To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process' and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies,' this will involve familiarity with quality plans, drawings, and sales orders. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
24/04/2024
Full time
Coating Technician, Full-Time on-site in Leicestershire. Up to £29K Plus Shift Allowance (Shift Pattern: 06.00 - 14.00/14.00 - 22.00 - Monday - Friday). Possible weekend requirement. Client: An Industry leader in ultra-durable optics for extreme environmental conditions and temperature fluctuations Mission: To assist the coating department by using optical technological knowledge to help with production requirements to meet on-time-delivery requirements Yield expectations. To stay competitive within the current market and to assist in new product development. To make recommendations for continuous process improvements and may instigate relevant development activity. Key Responsibilities Ability to measure and assess work on the appropriate spectrophotometers. Ability to identify potential coating problems in process' and take appropriate corrective action. Ability to identify coating defects such as spatter, striae, delamination, lint marks, comet marks etc. and understand the possible causes and know the type of action to take to avoid their occurrence. Possesses a thorough understanding of relevant Surface Quality Specifications and how the above relates to them. Examine work prior to coating and be satisfied it is fit to coat. Determine and specify the suitability of jigs for coating taking account of aspects such as clear aperture, outer dimensions, condition of jig being used, etc. Determines the appropriate test pieces to load into a run to maximise efficiencies and adherence to Quality schedules, is capable of measuring witness pieces to produce customer copies,' this will involve familiarity with quality plans, drawings, and sales orders. Capable of stripping optics safely, observing Local Health and Safety rules. Identify potential problems with the coating plant/measuring equipment and alert the appropriate support staff. Understand and adhere to the relevant Quality Control Procedures in accordance with ISO 9002. Competent to train colleagues on various aspects of the coating department. Education, Skills Abilities: Qualifications in Mathematics and Physics at least to GCSE or A level Computer literacy, including familiarity with Excel and Word The ability to analyse situations and results A good understanding of optical manufacture A good engineering background Physical Demands: This will involve physical activities such as transporting optics to and from the coating department. SmartSourcing are a Disability Confident Employer and we promote, celebrate and value diversity, we are committed to promoting equality and inclusion for all.
Sheet Metal Worker/Welder Manchester About Our Client: Our Client is a long-established (40+ years) and growing family-run business specializing in sheet metal fabrication and welding. We offer a friendly, relaxed workplace environment focused on quality craftsmanship. Job Summary: We are seeking an experienced, skilled Sheet Metal Worker/Welder to join our team as a subcontractor. In this hands-on role, you will have the opportunity to work on a diverse range of projects and tackle new challenges daily across mild steel, stainless steel, and aluminium fabrication. Key Responsibilities: Read and interpret technical drawings, specifications, and manufacturing plans Perform MIG and TIG welding of thin plate mild steel and stainless steel components Operate CNC press brakes, Laser cutters, and other metalworking equipment Fabricate precise, high-quality metal parts, enclosures, frames, and assemblies Maintain clean and safe Workstation, adhering to health and safety protocols Requirements: Time-served background as a Sheet Metal Worker with proven welding experience Extensive MIG and TIG welding skills for mild steel and stainless steel (essential) Ability to read and work from technical drawings and manufacturing plans (critical) Experience operating CNC press brakes (preferred) Aluminium welding experience (preferred) Strong attention to detail and pride in delivering quality workmanship Reliable, punctual, and committed to meeting deadlines Working Hours: Monday-Thursday 7:30 AM - 4:15 PM, Friday 7:30 AM - 1:30 PM Compensation & Benefits: Competitive hourly rate of £16 - £18/hour Annual bonus based on company performance (approx. 2 weeks' pay) Occasional paid overtime at 1.5x rate (rare requirement) Join our skilled fabrication team at Our Client! If you are an experienced Sheet Metal Worker/Welder looking for an opportunity to showcase your talents, apply now.
23/04/2024
Project-based
Sheet Metal Worker/Welder Manchester About Our Client: Our Client is a long-established (40+ years) and growing family-run business specializing in sheet metal fabrication and welding. We offer a friendly, relaxed workplace environment focused on quality craftsmanship. Job Summary: We are seeking an experienced, skilled Sheet Metal Worker/Welder to join our team as a subcontractor. In this hands-on role, you will have the opportunity to work on a diverse range of projects and tackle new challenges daily across mild steel, stainless steel, and aluminium fabrication. Key Responsibilities: Read and interpret technical drawings, specifications, and manufacturing plans Perform MIG and TIG welding of thin plate mild steel and stainless steel components Operate CNC press brakes, Laser cutters, and other metalworking equipment Fabricate precise, high-quality metal parts, enclosures, frames, and assemblies Maintain clean and safe Workstation, adhering to health and safety protocols Requirements: Time-served background as a Sheet Metal Worker with proven welding experience Extensive MIG and TIG welding skills for mild steel and stainless steel (essential) Ability to read and work from technical drawings and manufacturing plans (critical) Experience operating CNC press brakes (preferred) Aluminium welding experience (preferred) Strong attention to detail and pride in delivering quality workmanship Reliable, punctual, and committed to meeting deadlines Working Hours: Monday-Thursday 7:30 AM - 4:15 PM, Friday 7:30 AM - 1:30 PM Compensation & Benefits: Competitive hourly rate of £16 - £18/hour Annual bonus based on company performance (approx. 2 weeks' pay) Occasional paid overtime at 1.5x rate (rare requirement) Join our skilled fabrication team at Our Client! If you are an experienced Sheet Metal Worker/Welder looking for an opportunity to showcase your talents, apply now.
Job Description: Infosight Consulting is looking for Project Engineer for one of the challenging and exciting projects. Role: Project Engineer Location: Leven, Fife, UK Contract Position Infosight is looking for Project Engineer with: Support the Civils Capex Project Engineer on the ground with safe working practises, adherent to RAMS, site inductions are planned and contractors have access to site in advance of activities starting. Ensure compliance with all relevant health, safety and environmental standards, including the Construction, Design & Management Regulations. The role holder will have a construction/H&S engineering management background. Use specialist knowledge to support safe deliver capex projects, working closely with Supply Operations teams and Capex Project Engineers. Consult on induction content for CDM projects (should be led by PC) Facilitate joint safety inspections with site teams Support Project Manager(s) on preparation of key H&S documentation and plans (eg PCI, CPP, Traffic Management, H&S File, Risk Assessments, site set up plan, etc) Ensure H&S has been considered at outset of project (before approval and tender issue) to ensure safety standards and ways of working are business as usual Support site set up (should be led by Project Engineer. H&S Lead to provide input/guidance and help co-ordinate implementation) Support PEs with pre-start walkthroughs, RAMS review and engage with site control of contractors process Co-ordinate with operations on key interfaces (eg temp walkways, updates to traffic management plans, security requirements, etc.) Be an ambassador/champion for H&S excellence during the construction phase, ie correct use of PPE at all times, challenging constructively where appropriate, providing feedback to project team and operatives on H&S performance, suggest ways to improve H&S performance. Attend daily white board meetings as often as practicable (frequency should be agreed with Technical Manager/Lead PE). contractors. Carry out audits and Immediate Corrective Action walks (ICAs) and record in project folder Day to day co-ordination at project interfaces (co-ordination within project boundary is main contractor responsibility) Drive accident/incident investigations including co-ordination with Global Eng Regional H&S Manager Support PEs with input of H&S Stats Assist in the delivery of any behavioural safety initiatives and training. Identify reoccurring safety concerns and proactively resolve by engaging with Skills Must have NEBOSH General Certificate as a minimum Health & Safety Management. The main focus of role is to support the Safe management of contractors: Construction/Project/Civil Management WHAT INFOSIGHT OFFERS Excellent Pay Packages An Opportunity to work in Global locations at our Client Sites Flexi-Working arrangement ABOUT INFOSIGHT Infosight Consulting is a Business & IT consulting company, head quartered in United Kingdom, operating since 2006 globally, specializes in SAP, Oracle & Ramco Solutions. Infosight has been delivering outstanding value to its customers by addressing their Business Challenges with appropriate application & services.
23/04/2024
Project-based
Job Description: Infosight Consulting is looking for Project Engineer for one of the challenging and exciting projects. Role: Project Engineer Location: Leven, Fife, UK Contract Position Infosight is looking for Project Engineer with: Support the Civils Capex Project Engineer on the ground with safe working practises, adherent to RAMS, site inductions are planned and contractors have access to site in advance of activities starting. Ensure compliance with all relevant health, safety and environmental standards, including the Construction, Design & Management Regulations. The role holder will have a construction/H&S engineering management background. Use specialist knowledge to support safe deliver capex projects, working closely with Supply Operations teams and Capex Project Engineers. Consult on induction content for CDM projects (should be led by PC) Facilitate joint safety inspections with site teams Support Project Manager(s) on preparation of key H&S documentation and plans (eg PCI, CPP, Traffic Management, H&S File, Risk Assessments, site set up plan, etc) Ensure H&S has been considered at outset of project (before approval and tender issue) to ensure safety standards and ways of working are business as usual Support site set up (should be led by Project Engineer. H&S Lead to provide input/guidance and help co-ordinate implementation) Support PEs with pre-start walkthroughs, RAMS review and engage with site control of contractors process Co-ordinate with operations on key interfaces (eg temp walkways, updates to traffic management plans, security requirements, etc.) Be an ambassador/champion for H&S excellence during the construction phase, ie correct use of PPE at all times, challenging constructively where appropriate, providing feedback to project team and operatives on H&S performance, suggest ways to improve H&S performance. Attend daily white board meetings as often as practicable (frequency should be agreed with Technical Manager/Lead PE). contractors. Carry out audits and Immediate Corrective Action walks (ICAs) and record in project folder Day to day co-ordination at project interfaces (co-ordination within project boundary is main contractor responsibility) Drive accident/incident investigations including co-ordination with Global Eng Regional H&S Manager Support PEs with input of H&S Stats Assist in the delivery of any behavioural safety initiatives and training. Identify reoccurring safety concerns and proactively resolve by engaging with Skills Must have NEBOSH General Certificate as a minimum Health & Safety Management. The main focus of role is to support the Safe management of contractors: Construction/Project/Civil Management WHAT INFOSIGHT OFFERS Excellent Pay Packages An Opportunity to work in Global locations at our Client Sites Flexi-Working arrangement ABOUT INFOSIGHT Infosight Consulting is a Business & IT consulting company, head quartered in United Kingdom, operating since 2006 globally, specializes in SAP, Oracle & Ramco Solutions. Infosight has been delivering outstanding value to its customers by addressing their Business Challenges with appropriate application & services.
Electrical Engineer Stone, Staffordshire Up to £65,000 VIQU have partnered with a leading entity in operational technology and digital transformation. They boast a longstanding reputation for advanced system integration, with expertise in optimising efficiency and achieving impressive performance on a large scale. Their commitment to continuous innovation drives their forward-thinking approach. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. They are seeking skilled Electrical Engineers to join their Energy team, specialising in Electrical, Control & Instrumentation (E, C & I) design and implementation. The role entails designing electrical and control systems, particularly focusing on PLC based systems for thermal and hydro power generation. As the Electrical Engineer, your responsibilities include conducting site surveys, creating system designs, producing documentation, and providing support during site acceptance testing. The successful Electrical Engineer will possess expertise in control systems, field cabling systems, and control panel design, along with relevant education and proficiency in software such as Word, Autocad, and Excel. It is also desirable for the Electrical Engineer to have familiarity with specific control system platforms, site installation experience, knowledge of wiring regulations, and awareness of safety regulations. Essential Skills of the Electrical Engineer: - Experience in control systems within the energy market - Competency in field cabling systems including surveying and route identification - Competency in control panel design incorporating PLC, I/O, Comms cards, UPS's etc - Relevant education to at least degree level or HND with additional experience - Computer literacy with Word, Autocad, and Excel - Methodical approach to project interpretation and delivery - Understanding of Full Project Lifecycle - Hold a current full driving licence (UK or be able to easily convert to full UK) - Willingness to undergo a basic disclosure Scotland check. To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Electrical Engineer Stone, Staffordshire Up to £65,000
23/04/2024
Full time
Electrical Engineer Stone, Staffordshire Up to £65,000 VIQU have partnered with a leading entity in operational technology and digital transformation. They boast a longstanding reputation for advanced system integration, with expertise in optimising efficiency and achieving impressive performance on a large scale. Their commitment to continuous innovation drives their forward-thinking approach. Operating in highly regulated and demanding industrial sectors, they have successfully executed pivotal projects across energy, renewables, water, and manufacturing domains. They are seeking skilled Electrical Engineers to join their Energy team, specialising in Electrical, Control & Instrumentation (E, C & I) design and implementation. The role entails designing electrical and control systems, particularly focusing on PLC based systems for thermal and hydro power generation. As the Electrical Engineer, your responsibilities include conducting site surveys, creating system designs, producing documentation, and providing support during site acceptance testing. The successful Electrical Engineer will possess expertise in control systems, field cabling systems, and control panel design, along with relevant education and proficiency in software such as Word, Autocad, and Excel. It is also desirable for the Electrical Engineer to have familiarity with specific control system platforms, site installation experience, knowledge of wiring regulations, and awareness of safety regulations. Essential Skills of the Electrical Engineer: - Experience in control systems within the energy market - Competency in field cabling systems including surveying and route identification - Competency in control panel design incorporating PLC, I/O, Comms cards, UPS's etc - Relevant education to at least degree level or HND with additional experience - Computer literacy with Word, Autocad, and Excel - Methodical approach to project interpretation and delivery - Understanding of Full Project Lifecycle - Hold a current full driving licence (UK or be able to easily convert to full UK) - Willingness to undergo a basic disclosure Scotland check. To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly. If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply). Electrical Engineer Stone, Staffordshire Up to £65,000
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
23/04/2024
Project-based
Lead Electrical Engineer - Inside IR35 - €750 per day! We are recruiting an Electrical Engineer for a project in County Clare, Ireland, which is expected to run until the end of February 2026. Our client is in the process of transitioning a power station's primary fuel from coal to heavy fuel oil. The works require the construction of two new heavy fuel oil tanks, new auxiliary boilers, new ash injection system, upgrade of the existing HFO Systems, ancillary systems and modifications to the existing site infrastructure. As an Electrical Engineer you will be tasked to manage the key responsibilities which are listed below: - Perform role of lead electrical engineer and be responsible for the electrical engineering works on site for the successful delivery of the emergency generation projects. Manage Site teams (as required), and liaison with Station Electrical and Instrumentation (E&I) teams. Liaise with Control & Instrumentation, Mechanical and Civil design teams to ensure delivery co-ordination on multi-disciplinary projects. Ensure that electrical systems are installed, tested, and operated safely and efficiently in accordance with regulations, standards, and guidelines. Co-ordinate electrical testing and commissioning activities on Low Voltage (LV), Medium Voltage (MV) and High Voltage (HV) systems and provide advice on testing and commissioning procedures and documentation. Support the management of projects from installation, commissioning, and handover. Support the team of electrical engineers delivering engineering design and support services for generating technologies. Support for the Safety Systems at site and apply a high level of safety standards in every aspect of the work. Skills and Experience Proven track record of significant experience in the power generation industry. A minimum of 7 years' relevant experience is required. Design, and Construction or Commissioning experience, is preferred. Extensive knowledge of electrical equipment utilised in power plant projects, preferably including LV and MV Proven ability to deliver on the key responsibilities outlined above. A proven track record in delivering complex engineering projects and ability to manage multiple projects. Experience of Project Management tools would be an advantage. Working knowledge of Health, Safety and Environment Standards, and Electrical Safety procedures An EU/British passport will be required for this role, as the role requires onsite working Monday to Friday. The daily rate on offer is €750 all-inclusive (no expenses). Further information is available upon request.
Lead AV Engineer We're seeking a proactive AV Engineer to join a engaging team and ensure seamless on-site installations and client satisfaction. If you're passionate about delivering top-quality service and have a knack for technical intricacies, this role is for you. Key Responsibilities: Execute on-site installations, ensuring impeccable integration of Company-deployed equipment and other manufacturer products when necessary. Perform comprehensive commissioning of all equipment at client sites. Conduct client training sessions to ensure smooth operation and understanding of installed systems. Duties: Oversee on-site installations to ensure they meet the highest quality standards and exceed client expectations. Manage tasks on-site, coordinating with the Project Manager to ensure timely completion of projects. Adhere to quality control procedures during equipment testing, delivery, installation, and commissioning. Develop a deep understanding of deployed systems and client environments to facilitate efficient site visits. Verify equipment against delivery notes and conduct commissioning tests to ensure proper functionality. Provide user training sessions as needed. Offer technical support services, including helpdesk assistance and on-site troubleshooting. Maintain strict adherence to safety protocols and best practices. Stay updated on the Company's solutions and services portfolio. Obtain relevant qualifications and certifications required by the Company, including health and safety certifications, AVIXA CTS, and manufacturer product certifications. Assist the sales team with technical advice and activities. Perform additional duties as directed by management. This is an excellent opportunity for a positive engaging Audio Visual Engineer who is seeking skill and role development. If you're ready to contribute to a dynamic team and play a crucial role in ensuring client satisfaction, apply now to join our team as an Installation and Commissioning Technician
23/04/2024
Full time
Lead AV Engineer We're seeking a proactive AV Engineer to join a engaging team and ensure seamless on-site installations and client satisfaction. If you're passionate about delivering top-quality service and have a knack for technical intricacies, this role is for you. Key Responsibilities: Execute on-site installations, ensuring impeccable integration of Company-deployed equipment and other manufacturer products when necessary. Perform comprehensive commissioning of all equipment at client sites. Conduct client training sessions to ensure smooth operation and understanding of installed systems. Duties: Oversee on-site installations to ensure they meet the highest quality standards and exceed client expectations. Manage tasks on-site, coordinating with the Project Manager to ensure timely completion of projects. Adhere to quality control procedures during equipment testing, delivery, installation, and commissioning. Develop a deep understanding of deployed systems and client environments to facilitate efficient site visits. Verify equipment against delivery notes and conduct commissioning tests to ensure proper functionality. Provide user training sessions as needed. Offer technical support services, including helpdesk assistance and on-site troubleshooting. Maintain strict adherence to safety protocols and best practices. Stay updated on the Company's solutions and services portfolio. Obtain relevant qualifications and certifications required by the Company, including health and safety certifications, AVIXA CTS, and manufacturer product certifications. Assist the sales team with technical advice and activities. Perform additional duties as directed by management. This is an excellent opportunity for a positive engaging Audio Visual Engineer who is seeking skill and role development. If you're ready to contribute to a dynamic team and play a crucial role in ensuring client satisfaction, apply now to join our team as an Installation and Commissioning Technician
Mechanical Technician - up to £28 per hour Inside IR35 - 12 Months (extensions highly likely) Herefordshire - standard 37 hours - Fully Onsite Working (Free Parking).Apprenticeship and NVQ needed* One stage F2F interview with skills test - Sector: Aerospace and Defence Are you a skilled production professional seeking a challenging opportunity with a leading company in the manufacturing sector? We are currently looking for dedicated individuals to join the Operations team of Our client who is a renowned Aerospace company at the forefront of space exploration and travel. Daily tasks will include assembly and final assembly processes of aluminium composite panel manufacture. Responsibilities: * Able to insert panels with the correct type of mechanical fasteners. * Potting of inserts * Bonding of various brackets and equipment * Bonding of inserts, using various adhesives * Bonding components and sub-assemblies using adhesives to drawing specifications * Produce work to drawing specification * Ability to read and understand Detailed engineering drawings and procedures. * Awareness and adherence to all the company Health & Safety procedures * High tolerance requirements (typically better than 0.05mm in various areas). Essential: Previous experience in a Manual Handling Role Previous experience within a production/manufacturing environment with regular use of hand tools Ability to follow procedures and work instructions/manuals. Relevant experience in carbon fibre A relevant Apprenticeship or NVQ Desirable: Clean room environment experience Previous experience of laminating Aluminium Ability to read and interpret engineering drawings preferred
23/04/2024
Project-based
Mechanical Technician - up to £28 per hour Inside IR35 - 12 Months (extensions highly likely) Herefordshire - standard 37 hours - Fully Onsite Working (Free Parking).Apprenticeship and NVQ needed* One stage F2F interview with skills test - Sector: Aerospace and Defence Are you a skilled production professional seeking a challenging opportunity with a leading company in the manufacturing sector? We are currently looking for dedicated individuals to join the Operations team of Our client who is a renowned Aerospace company at the forefront of space exploration and travel. Daily tasks will include assembly and final assembly processes of aluminium composite panel manufacture. Responsibilities: * Able to insert panels with the correct type of mechanical fasteners. * Potting of inserts * Bonding of various brackets and equipment * Bonding of inserts, using various adhesives * Bonding components and sub-assemblies using adhesives to drawing specifications * Produce work to drawing specification * Ability to read and understand Detailed engineering drawings and procedures. * Awareness and adherence to all the company Health & Safety procedures * High tolerance requirements (typically better than 0.05mm in various areas). Essential: Previous experience in a Manual Handling Role Previous experience within a production/manufacturing environment with regular use of hand tools Ability to follow procedures and work instructions/manuals. Relevant experience in carbon fibre A relevant Apprenticeship or NVQ Desirable: Clean room environment experience Previous experience of laminating Aluminium Ability to read and interpret engineering drawings preferred
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
23/04/2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Facility Coordinator/Facility Manager (w/m/d) - Reguliertes Umfeld / Google Workspace / SAP/ Gebäudemanagement / Deutsch Projekt: Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir einen Facility Coordinator/Facility Manager (w/m/d) Hintergrund: Das Facility und Real Estate Management gestaltet jetzige und künftige Standorte für alle Mitarbeitenden und antizipiert dabei Trends, einerseits interner und strategischer Natur, prüft dabei aber auch externe Einflüsse. In Abstimmung mit der Unternehmensstrategie, dem Wachstum und dem Bedarf aller Funktionen am Standort, stellt das Real Estate Flächen bereit, die qualitativ hochwertig sind und gängigen Standards entsprechen. Als Facility Coordinator ist man der Ansprechpartner für die Gebäudenutzer und Handwerker. Der oder die perfekte Kandidat:in ist eine Person, die eine technische oder naturwissenschaftliche Grundausbildung oder eine abgeschlossene kaufmännische Berufslehre vorweist und zudem bereits erste Berufserfahrungen im Bereich Gebäudemanagement mitbringt. Dieser verfügt ausserdem über fliessende Deutsch und sehr gute Englischkenntnisse. Hauptaufgaben und Verantwortungsbereiche: Wahrnehmung der Gebäudeverantwortung . Eigenständige Abwicklung/Mitarbeit von Projekten im Bereich Health, Safety and Environment sowie proaktive Zusammenarbeit mit dem Kunden bei entsprechenden Projekten . Aufzeigen von Lösungen bei Kundenwünschen und Abstimmung mit Nutzern . Kommunikation u.A. von Störungen oder Instandhaltungsarbeiten und Gebäude relevanten Informationen . Mitarbeit bei der Entwicklung, Anpassung und Einführung von Standards, Prozessen und Dokumentationen . Erfassung und Pflege von CAFM relevanten Daten . Support und Koordination bei Umzügen . Vorbereiten und Erstellen von Präsentationen, Reports und Kommunikationen . Koordinationsstelle zwischen Nutzern und Dienstleistern sowohl Gebäude-intern wie auch -extern . Erteilen, Betreuen und Überwachen von Aufträgen an interne und externe Dienstleistungserbringer und Lieferanten unter Einhaltung von Kosten, Terminen und Qualität . Beratung im Bereich Einrichtung und Ergonomie Must Haves: Technische oder naturwissenschaftliche Grundausbildung oder abgeschlossene kaufmännische Berufslehre, bevorzugt mit einer höheren Zusatzausbildung im Facility Management, kaufmännischen resp. technischen Bereich . 1-3 Jahre Berufserfahrung im Bereich Gebäudemanagement, bevorzugt im Facility Management/Real Estate . Berufserfahrung im regulierten Umfeld (GxP) . Erweiterte MS Office Kenntnisse/Google Workspace/CAD-Basiskenntnisse/SAP-Basiskenntnisse/ServiceNow Kenntnisse . Fliessende Deutschkenntnisse, Englisch sehr gut . Einbringen von eigenen Ideen/vernetzt denkend/priorisierend/serviceorientiert/analytisch/lösungsorientiert/interessiert an digitalen Tools/Organisationstalent . Teamplayer Nice to have: Höhere Zusatzausbildung im Facility Management, kaufmännischen resp. technischen Bereich von Vorteil . EKAS Zertifikat . Laborerfahrung von Vorteil Referenz Nr.: 923387TP Rolle: Facility Coordinator/Facility Manager (w/m/d) Industrie: Pharma Arbeitsort: Kaiseraugst Pensum: 100% Start: 01.06.2024 Dauer: 12 Bewerbungsfrist : 28.04.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns : ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen, IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen kein zusätzlichen Gebühren.
23/04/2024
Project-based
Facility Coordinator/Facility Manager (w/m/d) - Reguliertes Umfeld / Google Workspace / SAP/ Gebäudemanagement / Deutsch Projekt: Für unseren Kunden, ein grosses Pharmaunternehmen mit Sitz in Kaiseraugst suchen wir einen Facility Coordinator/Facility Manager (w/m/d) Hintergrund: Das Facility und Real Estate Management gestaltet jetzige und künftige Standorte für alle Mitarbeitenden und antizipiert dabei Trends, einerseits interner und strategischer Natur, prüft dabei aber auch externe Einflüsse. In Abstimmung mit der Unternehmensstrategie, dem Wachstum und dem Bedarf aller Funktionen am Standort, stellt das Real Estate Flächen bereit, die qualitativ hochwertig sind und gängigen Standards entsprechen. Als Facility Coordinator ist man der Ansprechpartner für die Gebäudenutzer und Handwerker. Der oder die perfekte Kandidat:in ist eine Person, die eine technische oder naturwissenschaftliche Grundausbildung oder eine abgeschlossene kaufmännische Berufslehre vorweist und zudem bereits erste Berufserfahrungen im Bereich Gebäudemanagement mitbringt. Dieser verfügt ausserdem über fliessende Deutsch und sehr gute Englischkenntnisse. Hauptaufgaben und Verantwortungsbereiche: Wahrnehmung der Gebäudeverantwortung . Eigenständige Abwicklung/Mitarbeit von Projekten im Bereich Health, Safety and Environment sowie proaktive Zusammenarbeit mit dem Kunden bei entsprechenden Projekten . Aufzeigen von Lösungen bei Kundenwünschen und Abstimmung mit Nutzern . Kommunikation u.A. von Störungen oder Instandhaltungsarbeiten und Gebäude relevanten Informationen . Mitarbeit bei der Entwicklung, Anpassung und Einführung von Standards, Prozessen und Dokumentationen . Erfassung und Pflege von CAFM relevanten Daten . Support und Koordination bei Umzügen . Vorbereiten und Erstellen von Präsentationen, Reports und Kommunikationen . Koordinationsstelle zwischen Nutzern und Dienstleistern sowohl Gebäude-intern wie auch -extern . Erteilen, Betreuen und Überwachen von Aufträgen an interne und externe Dienstleistungserbringer und Lieferanten unter Einhaltung von Kosten, Terminen und Qualität . Beratung im Bereich Einrichtung und Ergonomie Must Haves: Technische oder naturwissenschaftliche Grundausbildung oder abgeschlossene kaufmännische Berufslehre, bevorzugt mit einer höheren Zusatzausbildung im Facility Management, kaufmännischen resp. technischen Bereich . 1-3 Jahre Berufserfahrung im Bereich Gebäudemanagement, bevorzugt im Facility Management/Real Estate . Berufserfahrung im regulierten Umfeld (GxP) . Erweiterte MS Office Kenntnisse/Google Workspace/CAD-Basiskenntnisse/SAP-Basiskenntnisse/ServiceNow Kenntnisse . Fliessende Deutschkenntnisse, Englisch sehr gut . Einbringen von eigenen Ideen/vernetzt denkend/priorisierend/serviceorientiert/analytisch/lösungsorientiert/interessiert an digitalen Tools/Organisationstalent . Teamplayer Nice to have: Höhere Zusatzausbildung im Facility Management, kaufmännischen resp. technischen Bereich von Vorteil . EKAS Zertifikat . Laborerfahrung von Vorteil Referenz Nr.: 923387TP Rolle: Facility Coordinator/Facility Manager (w/m/d) Industrie: Pharma Arbeitsort: Kaiseraugst Pensum: 100% Start: 01.06.2024 Dauer: 12 Bewerbungsfrist : 28.04.2024 Sollte diese Position Ihr Interesse geweckt haben, senden Sie uns bitte Ihr komplettes Dossier via dem Link in dieser Anzeige zu. Über uns : ITech Consult ist ein nach ISO 9001:2015 zertifiziertes Schweizer Unternehmen mit Niederlassungen in Deutschland und Irland. ITech Consult ist spezialisiert auf die Vermittlung von hochqualifizierten Kandidaten für den Personalverleih in den Bereichen, IT, Life Science & Engineering. Wir bieten Personalverleih & Payroll Dienstleistungen an. Für unsere Kandidaten ist dies kostenlos, auch bei Payroll berechnen wir Ihnen kein zusätzlichen Gebühren.
Job Title: Network Engineer Type of role: Permanent Location: Birmingham Salary: up to £46,500 + benefits Flint UK is looking for a Network Engineer to join our one of our telecom's clients, based in Birmingham on a full time, permanent basis. This role will involve understanding in depth the vulnerabilities and vuln classes present carrier-grade telecoms kit that has just been or is just about to be deployed into the UK. This will include time and space to conduct novel and self-directed research - supported by your team and team lead. Successful candidates will get to have a unique experience working on or supporting the latest ground-breaking cyber security and networking technologies on a national and international scale. This opportunity will allow those involved to have first-hand exposure to the latest technologies via the research and development that we are undertaking to secure our telecommunications networks, in order to keep the UK, the safest place to live and do business online. About You Experience working with. Aruba networking. Installation and local configuration of Switches. Integration and management with Aruba Central. RADIUS integration ClearPass and/or 802.1x port based access control Juniper Firewall solutions. Installation and configuration Integration with Security Director for device and policy management Azure Networking, including Express Route management and monitoring Understanding of network operations and management. Understanding of optical networking technology and standards. Understanding of relevant industry best practice such as fault management, change management and configuration management. Experience of operating in telecoms environments eg previous experience in a Network Operator. Good communication and knowledge sharing ability, including upskill and mentoring of 1st and 2nd line support teams. Ability to collaborate with other disciplines to facilitate delivery of our objectives. Proactive approach to solving complex problems and finding innovative solutions to them. Provide 3rd line support to the support team. Assist with the design and testing of disaster recovery procedures for our network services. Understanding of commercial and IPR sensitivities when working with suppliers and operators. Responsible for taking reasonable duty of care for Health & Safety of themselves and of other persons who may be affected by their acts or omissions at work and always follow direct instructions given with regards to Health & Safety. Successful Applicants must be able to commute to the offices in Birmingham at least twice a week. We actively recruit citizens of all backgrounds, but the nature of our work in this specific area means that nationality, residency, and security requirements are more tightly defined than others. To work in this role, you will need to have a SC clearance with no restrictions, or you must have the ability to obtain a SC clearance.
23/04/2024
Full time
Job Title: Network Engineer Type of role: Permanent Location: Birmingham Salary: up to £46,500 + benefits Flint UK is looking for a Network Engineer to join our one of our telecom's clients, based in Birmingham on a full time, permanent basis. This role will involve understanding in depth the vulnerabilities and vuln classes present carrier-grade telecoms kit that has just been or is just about to be deployed into the UK. This will include time and space to conduct novel and self-directed research - supported by your team and team lead. Successful candidates will get to have a unique experience working on or supporting the latest ground-breaking cyber security and networking technologies on a national and international scale. This opportunity will allow those involved to have first-hand exposure to the latest technologies via the research and development that we are undertaking to secure our telecommunications networks, in order to keep the UK, the safest place to live and do business online. About You Experience working with. Aruba networking. Installation and local configuration of Switches. Integration and management with Aruba Central. RADIUS integration ClearPass and/or 802.1x port based access control Juniper Firewall solutions. Installation and configuration Integration with Security Director for device and policy management Azure Networking, including Express Route management and monitoring Understanding of network operations and management. Understanding of optical networking technology and standards. Understanding of relevant industry best practice such as fault management, change management and configuration management. Experience of operating in telecoms environments eg previous experience in a Network Operator. Good communication and knowledge sharing ability, including upskill and mentoring of 1st and 2nd line support teams. Ability to collaborate with other disciplines to facilitate delivery of our objectives. Proactive approach to solving complex problems and finding innovative solutions to them. Provide 3rd line support to the support team. Assist with the design and testing of disaster recovery procedures for our network services. Understanding of commercial and IPR sensitivities when working with suppliers and operators. Responsible for taking reasonable duty of care for Health & Safety of themselves and of other persons who may be affected by their acts or omissions at work and always follow direct instructions given with regards to Health & Safety. Successful Applicants must be able to commute to the offices in Birmingham at least twice a week. We actively recruit citizens of all backgrounds, but the nature of our work in this specific area means that nationality, residency, and security requirements are more tightly defined than others. To work in this role, you will need to have a SC clearance with no restrictions, or you must have the ability to obtain a SC clearance.
Position: Mechanical Technician Pay rate: £23.82 p/h inside IR35. location: Stevenage, UK Role Type: 12 Month contract with extension Position: Onsite IO Associates seeks a Panels Surface Treatments Technician for the Stevenage site . Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Collaborating within an AIT Operations team to consistently meet quality standards and adhere to production plans. Following LDS guidelines for methods and procedures, while ensuring compliance with standard processes, area requirements, and safety protocols. Upholding Cleanroom Regulations, local safety guidelines, and the 5S policy within the work area. Providing progress updates to Lead Technicians or Team Leads as needed, participating in shop floor meetings, supporting trainees, and contributing to continuous improvement efforts. Skills required Proficient in interpreting detailed drawings and electronic work instructions within prescribed procedures. Skilled in following procedures with defined checkpoints and quality gates. Experienced in various industries such as Space, Aerospace, Automotive, Motorsport, etc. Capable of working at elevated heights. Competent in preparing paint compounds according to manufacturer specifications. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. Please apply or get in touch with Munish or Email
22/04/2024
Project-based
Position: Mechanical Technician Pay rate: £23.82 p/h inside IR35. location: Stevenage, UK Role Type: 12 Month contract with extension Position: Onsite IO Associates seeks a Panels Surface Treatments Technician for the Stevenage site . Join a global aerospace leader specializing in commercial and military aircraft, helicopters, defense, and space sectors. This role offers a chance to contribute to innovative projects within a dynamic team shaping the future of aviation and space systems. Responsibilities Collaborating within an AIT Operations team to consistently meet quality standards and adhere to production plans. Following LDS guidelines for methods and procedures, while ensuring compliance with standard processes, area requirements, and safety protocols. Upholding Cleanroom Regulations, local safety guidelines, and the 5S policy within the work area. Providing progress updates to Lead Technicians or Team Leads as needed, participating in shop floor meetings, supporting trainees, and contributing to continuous improvement efforts. Skills required Proficient in interpreting detailed drawings and electronic work instructions within prescribed procedures. Skilled in following procedures with defined checkpoints and quality gates. Experienced in various industries such as Space, Aerospace, Automotive, Motorsport, etc. Capable of working at elevated heights. Competent in preparing paint compounds according to manufacturer specifications. This is an excellent opportunity to work for an international company that encourages and facilitates personal growth. Please apply or get in touch with Munish or Email
Global Technology Solutions Ltd
Antrim, County Antrim
Ideal location - Belfast Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Belfast . Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
22/04/2024
Full time
Ideal location - Belfast Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Belfast . Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served "Field Service Engineer", a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve: * Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. * Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. * Ability to follow documented procedures and adhere to safety and ESD precautions at all times. * Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. * Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. * Ensure process, procedural and contractual agreements are being followed correctly. * Endeavour to provide all customers with the best level of customer service and support. * Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. * Work proactively with call allocators to ensure SLA's are met in the most economic way. * Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded * Any additional activity as directed by Senior Management Key Experience * Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. * Manufacturer recognised accreditations, ie HP/IBM/Dell. Both Server and Desktop. * At least 6 years customer facing IT industry experience. * Capable of working independently on a wide range of products. * Excellent communication skills. * Excellent proven organisational and customer service skills. * Able to work under pressure. * Able to maintain a consistent high standard of quality and professionalism. * Excellent Time management skills. * Team Player - ability to work as part of the team to deliver operational excellence. * Awareness of ITIL methodologies and best practice. * Previous employment in a similar role. * Ability to show flexibility to help the changing needs of the team. * Adhere to company standards and procedures at all times unless otherwise directed. * Maintain excellent customer relationships. * Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service * Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills * MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) * X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) * Laptop Hardware break fix skills (replace all components) * Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) * Will form part of an on call rota covering 24*7*365 call outs Senior Engineer good to have experience/skills * Netapp - major advantage to hold this * Retail/Point of Sale (POS) Personal Attribute * Highly enthusiastic, approachable and self motivated to achieve targets. * Ability to prioritise workload effectively. * A Methodical and accurate approach to the job is critical. * Team focused - a genuine passion to deliver excellence through continuous development and improvement. * Be able to remain positive at all times and influence those around you. * Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. * Good relationship management skills. * Previous Senior Field Engineer experience desirable. * Analytical, with exceptional attention to detail. * Innovative thinking, in terms of service quality and improvements * Full UK Driving Licence. In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
22/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
General Operator - £22.64 per hour inside ir35 + up to 29% shift uplift - Bolton - onsite working - 12 months (extension highly likely) - Sector: Aerospace & Defence Yolk recruitment is recruiting for a General Operator to work with a world leader in the aerospace and defence sector. You will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Shift Patterns: 12-hour days Monday-Thursday paid at 115% rate 12-hour days on Friday and Sunday paid at 129% rate *Night shift pattern is available as an alternative option paying 133% of normal time Responsibilities: Carry out detailed standard assembly/manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified/trained preferred. Core Skills: Experience within a manufacturing sector in areas such as: Plastic CCA Assembly/PCB Assembly Soldering/Microelectronics Desirable Skills: Previous experience within the aerospace sector
22/04/2024
Project-based
General Operator - £22.64 per hour inside ir35 + up to 29% shift uplift - Bolton - onsite working - 12 months (extension highly likely) - Sector: Aerospace & Defence Yolk recruitment is recruiting for a General Operator to work with a world leader in the aerospace and defence sector. You will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Shift Patterns: 12-hour days Monday-Thursday paid at 115% rate 12-hour days on Friday and Sunday paid at 129% rate *Night shift pattern is available as an alternative option paying 133% of normal time Responsibilities: Carry out detailed standard assembly/manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified/trained preferred. Core Skills: Experience within a manufacturing sector in areas such as: Plastic CCA Assembly/PCB Assembly Soldering/Microelectronics Desirable Skills: Previous experience within the aerospace sector
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.
22/04/2024
Full time
We are currently looking on behalf of one of our important clients for an Electronic Hardware Design Engineer. The role is a permanent position based Bern Canton & comes with some home office allowance. Your Role: Develop Electronics Solutions for customers, projects & a new product portfolio. Design, implement, document & verify Electronic HW for new & existing control systems. Work on international projects & participate in risk & safety assessments within interdisciplinary teams. Design prototypes & test infrastructure & automation solutions, implement them, take over technical product support across the entire product life cycle & support with production, assembly & commissioning work. Plan & carry out standard tests in-house, in external test laboratories & on customer premises. Your Skills: At least 3 years of relevant professional experience in Electronic Hardware Engineering & very proficient Electronic Development skills. Skilled & experienced in the Development of Industrial Control Electronics (CAN, BLDC, ACDC, EMC). Good Soldering skills. A knowledge of one or more PCB design tools (OrCAD, Altium, Mentor) is considered advantageous. Any experience in Python, C/C++ or similar programming languages is a plus. Ideally experienced in Motor Control. Experience in Obsolescence Management is desirable. Preferably experienced in the Transportation Industry, Industrial Environments, Safety-Critical Industries & Series Production. Your Profile: Completed University Degree in the field of Electronics, Electrical Engineering, Computer Science or similar. Enthusiastic to cooperate within Interdisciplinary Project Teams. Fluent in English (spoken & written). Any additional language skills in German or French are considered very advantageous.