Stress Engineer Stress; FEA; Structures; Materials Science; Mechanical Engineering £35,000 - £55,000 + excellent Benefits. Kidderminster (Hybrid available) A cutting-edge Aerospace & Defence organisation have a unique opportunity for a Stress Engineer to join their Design team. The design department designs new and modified rocket motors and related systems. Analysis of rocket motor designs, including: Ballistic performance prediction and modelling, propellant charge and hardware stress analysis, and the provision of documentation service. ESSENTIAL DUTIES & REPONSIBILITIES - Stress Engineer Technical Responsibilities Analysis of new and existing rocket motor systems such as motor hardware and propellant charge structural and thermal analysis using FEA software. The use of various software and programming techniques, including: Abaqus, Altair-Hyperworks, Fortran and Matlab. Rheological analysis of material testing results and providing advice to the technical community for validation and verification of FEA models. Development of motor structural test plans and involvement in the delivery and assessment of the structural testing results. Responsible as the structural performance technical authority aspects of assigned projects, including supporting project customer meetings, project investigations, design reviews, and corresponding customer stress engineers. Deliver key project documentation including, structural analysis and structural test plans and reports and structural design records. EXPERIENCE & BACKGROUND - Stress Engineer Educated to degree level in an engineering discipline such as Mechanical, Aerospace or Structural or another related discipline such as Material Science. Material science knowledge Use of ABAQUS software in an professional or academic environment Experience with CAD modelling
25/04/2024
Full time
Stress Engineer Stress; FEA; Structures; Materials Science; Mechanical Engineering £35,000 - £55,000 + excellent Benefits. Kidderminster (Hybrid available) A cutting-edge Aerospace & Defence organisation have a unique opportunity for a Stress Engineer to join their Design team. The design department designs new and modified rocket motors and related systems. Analysis of rocket motor designs, including: Ballistic performance prediction and modelling, propellant charge and hardware stress analysis, and the provision of documentation service. ESSENTIAL DUTIES & REPONSIBILITIES - Stress Engineer Technical Responsibilities Analysis of new and existing rocket motor systems such as motor hardware and propellant charge structural and thermal analysis using FEA software. The use of various software and programming techniques, including: Abaqus, Altair-Hyperworks, Fortran and Matlab. Rheological analysis of material testing results and providing advice to the technical community for validation and verification of FEA models. Development of motor structural test plans and involvement in the delivery and assessment of the structural testing results. Responsible as the structural performance technical authority aspects of assigned projects, including supporting project customer meetings, project investigations, design reviews, and corresponding customer stress engineers. Deliver key project documentation including, structural analysis and structural test plans and reports and structural design records. EXPERIENCE & BACKGROUND - Stress Engineer Educated to degree level in an engineering discipline such as Mechanical, Aerospace or Structural or another related discipline such as Material Science. Material science knowledge Use of ABAQUS software in an professional or academic environment Experience with CAD modelling
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
25/04/2024
Project-based
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
25/04/2024
Full time
We are currently looking on behalf of one of our important clients for a Team Lead Hardware/Electronics Engineer (Medical Device Sector). The role is a permanent position based in Solothurn Canton with good home office allowance. Your Role: Lead a team of Hardware & Electronic Engineers. Actively drive concept generation & the analysis & development of innovative electronics solutions & system architectures of products in accordance with design, development & control processes. Hold responsibility for delivering functionally safe solutions with significant elements of cross-functional design (eg mechanical, software, firmware). Contribute to requirements definition & create design documentation & verification test plans. Drive new component introduction & obsolescence management with third party suppliers. Contribute to the continuous improvement of design & development processes. Participate in peer reviewing hardware development artifacts. Deliver work in compliance with ISO 13485 & FDA Medical Device Design Control processes. Support the team with HW related verifications including CB certifications for IEC 60601-1. Your Skills: At least 5 years professional experience in Developing Embedded Hardware Solutions, ideally including experience in Medical Devices, ensuring compliance with regulatory standards & enhancing patient care & safety. Proven experience in Leading Cross-Functional Teams. Any experience in Altium Designer, DOORS Next & Minitab is advantageous. Your Profile: Completed University Degree Hardware or Electrical Engineering (or similar). Team-oriented, collaborative & customer-focused. Fluent in English (spoken & written), German language skills are considered a plus.
I am currently looking for a Product Engineer (Electrical) for an automotive client based in Milton Keynes on a contract basis. Here are the key details: Job Type: Contract - initial 9 months with likely extensions ( INSIDE OF IR35 ) Rate: £35-40 p/h Location: Milton Keynes - 2 days a week on site Key Tasks: Own Design and Release of Electrical Commodities and Electrical Components across various Battery programs Central point of coordination and decision making between product line engineers, customer teams, systems engineers, purchasing, suppliers and manufacturing About You: Experience of complex Electrical Distribution and Electrical Automotive Systems Experience in specifying and designing automotive/battery pack low voltage, high voltage and control hardware Degree in relevant Engineering discipline with a minimum 5 years relevant experience If you are interested then please send me your CV and I will be in touch. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive Recruitment Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
24/04/2024
Project-based
I am currently looking for a Product Engineer (Electrical) for an automotive client based in Milton Keynes on a contract basis. Here are the key details: Job Type: Contract - initial 9 months with likely extensions ( INSIDE OF IR35 ) Rate: £35-40 p/h Location: Milton Keynes - 2 days a week on site Key Tasks: Own Design and Release of Electrical Commodities and Electrical Components across various Battery programs Central point of coordination and decision making between product line engineers, customer teams, systems engineers, purchasing, suppliers and manufacturing About You: Experience of complex Electrical Distribution and Electrical Automotive Systems Experience in specifying and designing automotive/battery pack low voltage, high voltage and control hardware Degree in relevant Engineering discipline with a minimum 5 years relevant experience If you are interested then please send me your CV and I will be in touch. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive Recruitment Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 1st Floor, 75 King William Street, London, EC4N 7BE, United Kingdom | Partnership Number | OC387148 England and Wales
A Senior Electronics Design Engineer is now needed for my Sheffield based client working on unique technology and working at their Headquarters. As their Senior Electronic Design Engineer you will be playing a pivotal role in the design and development of their products working through the full life cycle from concept through to production. You will be responsible for designing and implementing electronic systems to meet customer requirements and leasing with the firmware and software team. As this role is for a Senior Engineer you will also be expected to mentor/help guide with junior engineers who certainly will value your knowledge and experience, working in a friendly and welcoming environment. This role is ideally based on site with core hours/flexible working. Core skills include:- Electronic Design Analogue/digital/Mixed Circuitry Schematics Verification Leasing with the software teams for integration of hardware Debugging Validation testing PCB Layout Altium Design for EMC Desirable skills include:- SMPS Communication protocols Power Electronics DFMEA Do not worry if you don't have every skill listed the company are really interested in passionate Engineers so please do not hesitate to get in touch, as it would be great to hear from you. I appreciate that you may not have all of the skills listed but if you feel this may be suitable lets have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
24/04/2024
Full time
A Senior Electronics Design Engineer is now needed for my Sheffield based client working on unique technology and working at their Headquarters. As their Senior Electronic Design Engineer you will be playing a pivotal role in the design and development of their products working through the full life cycle from concept through to production. You will be responsible for designing and implementing electronic systems to meet customer requirements and leasing with the firmware and software team. As this role is for a Senior Engineer you will also be expected to mentor/help guide with junior engineers who certainly will value your knowledge and experience, working in a friendly and welcoming environment. This role is ideally based on site with core hours/flexible working. Core skills include:- Electronic Design Analogue/digital/Mixed Circuitry Schematics Verification Leasing with the software teams for integration of hardware Debugging Validation testing PCB Layout Altium Design for EMC Desirable skills include:- SMPS Communication protocols Power Electronics DFMEA Do not worry if you don't have every skill listed the company are really interested in passionate Engineers so please do not hesitate to get in touch, as it would be great to hear from you. I appreciate that you may not have all of the skills listed but if you feel this may be suitable lets have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Embedded C++ Engineer (Microcontrollers, Obtain SC Clearance) Chertsey, Surrey (3+ days in the office) £50000 - £60000+ Excellent Benefits Please note you must be eligible to for SC (Security Clearance) to apply for this role. That requires you to be resident in the UK for the last 5 years, with no trips of 30 days or more out of the country during that time. Your new company This leading Defence Contractor business are looking to bolster their Software team with an experienced C++ Developer. You will be working from their Chertsey site in leafy Surrey and will be required to work 3+ days per week in the office. You will need to have experience with Embedded design onto hardware with C++ experience. however, the design stage has already been completed for this project. Your new role Reporting to the Head of Engineering the role includes software design, development, and review for various systems, from small Embedded single processors to multi-processor networked systems. Collaborating closely with systems and hardware engineers, you'll create multidisciplinary solutions, defining software-hardware and software-firmware interfaces. Ensuring technical requirements are met at every stage of design, integration, and ultimately leading to customer acceptance. You will be joining a team of 4 and they will be the only software engineer on the project, so this is a really good opportunity to grow and progress into a Senior or Lead role. As a small-medium enterprise, they benefit from having a flat organisation structure with only a few levels between a junior role and a department head, so you can spend more time with technical application and less time wrangling with red tape. It also means that your voice is heard and there is plenty of opportunity for you to make a meaningful impact upon the business. Roles here present fantastic opportunities to be involved across the whole design life cycle, and with such a wide portfolio of products and capabilities, you can expect varied and career-expanding work that takes you across different engineering domains and environments. What you'll need to succeed You must have experience (3+ years) working as an Embedded Software Engineer using C++ in a Linux environment. You will have a passion using Microcontrollers and will have experience with Testing and Acceptance. A full understanding of the engineering life cycle is also important. You will ideally have knowledge of defence or MOD system gateways. What you'll get in return The benefits here are great. You'll work a 37.5 hour week but can condense your hours into a 4-day week if you choose. There is flexi-time and you can earn up to 24 additional paid days off per year (or conversely can work overtime). 32 days holiday+ Christmas close down for a week. There is private medical cover too. What you need to do now To find out more and to be considered for this position please apply directly, or contact Max Wilcock, Business Director. At Hays Technology, we are shaping the future of recruitment. The rapid adoption of cloud, which is making customer interfaces more engaging and creating a seamless engagement with businesses, means that from the foundation of your organisation up, software developers are critical to success. As the competition for talent grows, we're ready and waiting to help developers really make an impact on organisations, so talk to us today. We are Hays Technology. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
24/04/2024
Full time
Embedded C++ Engineer (Microcontrollers, Obtain SC Clearance) Chertsey, Surrey (3+ days in the office) £50000 - £60000+ Excellent Benefits Please note you must be eligible to for SC (Security Clearance) to apply for this role. That requires you to be resident in the UK for the last 5 years, with no trips of 30 days or more out of the country during that time. Your new company This leading Defence Contractor business are looking to bolster their Software team with an experienced C++ Developer. You will be working from their Chertsey site in leafy Surrey and will be required to work 3+ days per week in the office. You will need to have experience with Embedded design onto hardware with C++ experience. however, the design stage has already been completed for this project. Your new role Reporting to the Head of Engineering the role includes software design, development, and review for various systems, from small Embedded single processors to multi-processor networked systems. Collaborating closely with systems and hardware engineers, you'll create multidisciplinary solutions, defining software-hardware and software-firmware interfaces. Ensuring technical requirements are met at every stage of design, integration, and ultimately leading to customer acceptance. You will be joining a team of 4 and they will be the only software engineer on the project, so this is a really good opportunity to grow and progress into a Senior or Lead role. As a small-medium enterprise, they benefit from having a flat organisation structure with only a few levels between a junior role and a department head, so you can spend more time with technical application and less time wrangling with red tape. It also means that your voice is heard and there is plenty of opportunity for you to make a meaningful impact upon the business. Roles here present fantastic opportunities to be involved across the whole design life cycle, and with such a wide portfolio of products and capabilities, you can expect varied and career-expanding work that takes you across different engineering domains and environments. What you'll need to succeed You must have experience (3+ years) working as an Embedded Software Engineer using C++ in a Linux environment. You will have a passion using Microcontrollers and will have experience with Testing and Acceptance. A full understanding of the engineering life cycle is also important. You will ideally have knowledge of defence or MOD system gateways. What you'll get in return The benefits here are great. You'll work a 37.5 hour week but can condense your hours into a 4-day week if you choose. There is flexi-time and you can earn up to 24 additional paid days off per year (or conversely can work overtime). 32 days holiday+ Christmas close down for a week. There is private medical cover too. What you need to do now To find out more and to be considered for this position please apply directly, or contact Max Wilcock, Business Director. At Hays Technology, we are shaping the future of recruitment. The rapid adoption of cloud, which is making customer interfaces more engaging and creating a seamless engagement with businesses, means that from the foundation of your organisation up, software developers are critical to success. As the competition for talent grows, we're ready and waiting to help developers really make an impact on organisations, so talk to us today. We are Hays Technology. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
22/04/2024
Project-based
AIT Lead Engineer Advantage are recruiting on behalf of a prestigious Aerospace (Satellite) client in Stevenage for an AIT Lead Engineer. The purpose of the role is to promote and drive AIT standards ensuring engineering concepts are delivered to the shop floor in a controlled manner. You'll be brought on to ensure quality and process robustness through promotion of best practise within team and between disciplines and lead the AIT mechanical team to the success of the mission. Location : Stevenage: once settled in after a familiarisation period there will be some hybrid working during the preparation phase. During the operation build phase you will be required onsite 5 days a week. Hours : 37 hours per week. Responsibilities Responsible for the Mechanical Satellite element and lead the mechanical team on an ENS project through Phases 'A', 'B', 'C/D' and 'E' Leading a team of AIT engineers on the specific project Planning the mechanical team's activities on a weekly basis (including operations team) and implementing this plan. Supporting the use of 3Dx Delmia on the specific project Produce specs from test requirements, write test plans, DDV, plans, AIT plans, test procedures and test reports. Control of all project MGSE, flight & support equipment Produce MGSE requirement specs from test requirements, operating and maintaining MGSE. Alignment - producing test procedures and operating and maintaining optical alignment equipment. Designing test equipment, overseeing its manufacture, and commissioning Mechanical handling or spacecraft, instruments, payloads, solar arrays, antennas etc Prepare and carry out environmental tests (Vibration, Acoustic, Mass properties, Thermal) at unit, subsystem, instrument, and spacecraft level. Install and validate test instrumentation. Support propulsion testing Handling and installation of thermal hardware Mechanical integration and testing of electronic units, subsystems and instruments, mechanisms, antennas, solar arrays, mechanical sub-systems, instruments, payloads and spacecraft and control the documentation associated with performing these tasks. Pyrotechnic handling, installation, and safety Plan and control workload of the AIT team consisting of engineers and technicians. Be able to travel overseas to work for short periods (typically 2-3months, could be 6-7 months on occasions) Be able to integrate quickly and easily into an AIT team. Highly motivated and possess good problem-solving skills. Essential Candidate experience/skills requirements Relevant engineering experience. Appreciation of satellite integration processes and project phases Use of SAP or other ERP System Understanding of build documentation and the need for it Driving build quality through review of processes and implementation of improvements Managing a team during day-to-day activities ensuring work is completed on time and the correct standard Controlling and delivery of projects to budget and schedule Face-to-face dealings with customers and suppliers Worked in volatile, high pressure environments to resolve technical and personnel conflicts Spacecraft Mechanical testing on prime projects is essential Leading other team members Production of MGSE specs and operation of MGSE and flight HW Production of high quality documentation (test specs, test plans, test procedures, AIT Plans, DDV plans) Desirable Producing test procedures and operating and maintaining optical alignment equipment Launch campaign experience Submit your CV now to be considered for this great opportunity with a leading satellite aerospace business.
AV Senior Service Engineer - 3 Month Contract Day Rate: £200 Outside Location: London/Travel to other parts of the UK Job Type: Contract Working with the service desk team this role will involve support to service & support customers. You will be expected to mentor and upskill junior engineers performing maintenance and breakdown trips. You will also be required to do offsite repairs and make sure revisits are documented within limits of SLA We are seeking candidates with expertise in the following areas: Responsibilities: Carryout Maintenance visits At least 5 years experience engineering and experience in AV Crestron and AMX programming. Hardware & software fault finding and make changes to programs Supporting the service desk supervisor and support to junior engineers Carry out service visits Repair works on site Liaise with service desk manager, calls logged & feedback Tracking & Reporting paperwork Clean driving licence Carryout Maintenance visits How to Apply: If you are interested in this role, please follow the link below to apply. This contract role offers an exciting opportunity to work in a fast-paced environment, collaborating with passionate individuals who are dedicated to achieving excellence.
22/04/2024
Project-based
AV Senior Service Engineer - 3 Month Contract Day Rate: £200 Outside Location: London/Travel to other parts of the UK Job Type: Contract Working with the service desk team this role will involve support to service & support customers. You will be expected to mentor and upskill junior engineers performing maintenance and breakdown trips. You will also be required to do offsite repairs and make sure revisits are documented within limits of SLA We are seeking candidates with expertise in the following areas: Responsibilities: Carryout Maintenance visits At least 5 years experience engineering and experience in AV Crestron and AMX programming. Hardware & software fault finding and make changes to programs Supporting the service desk supervisor and support to junior engineers Carry out service visits Repair works on site Liaise with service desk manager, calls logged & feedback Tracking & Reporting paperwork Clean driving licence Carryout Maintenance visits How to Apply: If you are interested in this role, please follow the link below to apply. This contract role offers an exciting opportunity to work in a fast-paced environment, collaborating with passionate individuals who are dedicated to achieving excellence.
Position: Manufacturing Operations Engineer Location: Derby, UK Employment: Full-time Are you passionate about driving manufacturing excellence within a dynamic engineering environment? We are seeking a talented individual to join our team as a Manufacturing Operations Engineer. You'll play a crucial role in supporting projects related to manufactured hardware, contributing to the success of our cutting-edge initiatives in the aerospace industry. Key Responsibilities: Manage Bill of Materials: Create, update, and maintain BoMs and associated MOE tools while supporting multiple complex projects simultaneously. Technical Interface: Serve as a liaison between purchasing, design, manufacturing, and quality departments, ensuring seamless collaboration and alignment of objectives. Supplier Relationship Management: Develop and nurture supplier relationships, documenting lessons learned to enhance design for manufacturing practices. Quality Assurance: Work closely with Quality Engineering to ensure compliance with company quality procedures, addressing any non-conforming material issues promptly and effectively. Project Support: Ensure designs meet manufacturing requirements, set and execute project schedules, and provide regular status updates to stakeholders. Mentorship: Provide guidance and support to junior manufacturing engineers, fostering a collaborative and knowledge-sharing environment within the team. Qualifications & Experience: Bachelor's degree or equivalent experience in Mechanical/Manufacturing Engineering or a related technical field. Demonstrable experience in a manufacturing environment, with a strong understanding of project and manufacturing engineering principles. Proficiency in CAD software is beneficial. Excellent organizational and communication skills, both written and verbal. Ability to deliver technical presentations internally and to external stakeholders. Strong teamwork skills, capable of collaborating effectively within multidisciplinary project teams. Nice to Have: The company is also hiring for a part time Quality Engineer position. Candidates with experience in quality management systems may choose to work a dual role, spending roughly one day per week in the quality function. While this is not essential, it presents an exciting opportunity for individuals seeking additional responsibilities. Join us and embark on a journey of continuous growth and development. As an MOE, you'll have the chance to expand your expertise, take on increasing levels of responsibility, and contribute to groundbreaking advancements in aerospace technology. If this sounds like it matches your skill set, we advise you to apply directly or call Note: All candidates must be eligible to work in the UK.
19/04/2024
Full time
Position: Manufacturing Operations Engineer Location: Derby, UK Employment: Full-time Are you passionate about driving manufacturing excellence within a dynamic engineering environment? We are seeking a talented individual to join our team as a Manufacturing Operations Engineer. You'll play a crucial role in supporting projects related to manufactured hardware, contributing to the success of our cutting-edge initiatives in the aerospace industry. Key Responsibilities: Manage Bill of Materials: Create, update, and maintain BoMs and associated MOE tools while supporting multiple complex projects simultaneously. Technical Interface: Serve as a liaison between purchasing, design, manufacturing, and quality departments, ensuring seamless collaboration and alignment of objectives. Supplier Relationship Management: Develop and nurture supplier relationships, documenting lessons learned to enhance design for manufacturing practices. Quality Assurance: Work closely with Quality Engineering to ensure compliance with company quality procedures, addressing any non-conforming material issues promptly and effectively. Project Support: Ensure designs meet manufacturing requirements, set and execute project schedules, and provide regular status updates to stakeholders. Mentorship: Provide guidance and support to junior manufacturing engineers, fostering a collaborative and knowledge-sharing environment within the team. Qualifications & Experience: Bachelor's degree or equivalent experience in Mechanical/Manufacturing Engineering or a related technical field. Demonstrable experience in a manufacturing environment, with a strong understanding of project and manufacturing engineering principles. Proficiency in CAD software is beneficial. Excellent organizational and communication skills, both written and verbal. Ability to deliver technical presentations internally and to external stakeholders. Strong teamwork skills, capable of collaborating effectively within multidisciplinary project teams. Nice to Have: The company is also hiring for a part time Quality Engineer position. Candidates with experience in quality management systems may choose to work a dual role, spending roughly one day per week in the quality function. While this is not essential, it presents an exciting opportunity for individuals seeking additional responsibilities. Join us and embark on a journey of continuous growth and development. As an MOE, you'll have the chance to expand your expertise, take on increasing levels of responsibility, and contribute to groundbreaking advancements in aerospace technology. If this sounds like it matches your skill set, we advise you to apply directly or call Note: All candidates must be eligible to work in the UK.
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing the teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
19/04/2024
Full time
An Hardware/Electronics Manager is now available for a global client based near to Edinburgh. The role of Hardware/Electronics Design Manager is now needed as part of rapid growth within the business within Engineering with 10 Engineers reporting in across Electronics and PCB Design. As the Electronics Manager you will be shaping the team and leading the projects with a background of Hardware Design/PCB Design. Your role will involve managing the teams, succession planning, hiring, Performance Management and coaching managing their customer expectations. The company operate on a Hybrid working policy with Excellent benefits alongside bonus! Your role will also include maintaining technical roadmaps ad setting out the project scope, schedule and budget risks for projects for the team. This is an excellent opportunity if you are a Lead Electronics Design Engineer or Electronics Manager looking to get into an organisation where you have growth opportunities for leadership or if you are a staff level Engineer who has experience in mentoring/training/leading to take the next step up! Core Skills/Experience for this role include;- Degree in Engineering field - Electronics/Hardware/Computer Science etc Experience of Electronics Design, PCB Design Mentoring/Guidance of Junior, Mid level engineers Leading and delivering a project or any PM experience Leasing interfacing with customers or stakeholders within the business Excellent interpersonal skills Ability to work in a cross functional team environment I appreciate that you may not have all of the skills listed but if you feel this may be suitable let's have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer generous referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Help Desk Team Leader - Essex TurleyWay are partnering with a leading financial services organisation who are a market leader in their space. They are part of a large multinational organisation with financial services products reaching globally. They are well established, and pride themselves on their culture. They are looking for an experienced technologist with knowledge of working with PC, Server hardware and networking equipment. Are you looking for a role that offers a good work life balance and excellent career profession opportunities? Salary & Benefits: Up to £45k plus a bonus 1 day working from home Comprehensive training and career progression opportunities Strong supporting package Your Role: This company are looking for a self-starter to come in and lead a team of Support Engineers. You will be helping support a market leading payment company responsible for processing hundreds of millions of pounds annually. This would be a great role for someone looking to move into a leadership position, and take on more responsibility. Office & WFH Policy: The company offer a hybrid model. This is going to be working three/four days per week on site. Requirements: Experienced track record in computer support and knowledge of PC, Server hardware and ideally networking equipment. Experience of applications such as MS Office 365 and the major Microsoft operating systems. Knowledge and experience of the following is essential; MS Windows Server, MS Windows 10/11 and Microsoft Active Directory. Knowledge of the following technologies is desirable, PowerShell, Networking systems. Experience in leading a team or wanting to step into a leadership role is essential. Experience in procurement and contracts is desirable but not essential
18/04/2024
Full time
Help Desk Team Leader - Essex TurleyWay are partnering with a leading financial services organisation who are a market leader in their space. They are part of a large multinational organisation with financial services products reaching globally. They are well established, and pride themselves on their culture. They are looking for an experienced technologist with knowledge of working with PC, Server hardware and networking equipment. Are you looking for a role that offers a good work life balance and excellent career profession opportunities? Salary & Benefits: Up to £45k plus a bonus 1 day working from home Comprehensive training and career progression opportunities Strong supporting package Your Role: This company are looking for a self-starter to come in and lead a team of Support Engineers. You will be helping support a market leading payment company responsible for processing hundreds of millions of pounds annually. This would be a great role for someone looking to move into a leadership position, and take on more responsibility. Office & WFH Policy: The company offer a hybrid model. This is going to be working three/four days per week on site. Requirements: Experienced track record in computer support and knowledge of PC, Server hardware and ideally networking equipment. Experience of applications such as MS Office 365 and the major Microsoft operating systems. Knowledge and experience of the following is essential; MS Windows Server, MS Windows 10/11 and Microsoft Active Directory. Knowledge of the following technologies is desirable, PowerShell, Networking systems. Experience in leading a team or wanting to step into a leadership role is essential. Experience in procurement and contracts is desirable but not essential
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
18/04/2024
Full time
Summary: A world-leading test equipment company that helps utility companies install, protect, and maintain infrastructure networks is entering an exciting phase of hardware development. They are seeking a Senior Electronics Engineer to help shape the direction of the next generation of underground location products. This role sits within the New Product Development (NPD) team, responsible for executing the technology and product roadmaps. You will lead technical research to increase maturity and decrease risk in upcoming projects. As landscapes continuously evolve, you'll ensure roadmaps align and research feeds into robust products. Responsibilities Include: Leading and owning work packages from inception through completion Mentoring junior engineers and leading technical/cross-functional teams Providing technical interface to product management, developing concepts aligned to roadmaps Applying electronics engineering knowledge to plan, lead, and execute design tasks Developing technical solutions requiring ingenuity and creativity Requirements: Engineering degree in Electronic Engineering or similar Skilled all-round electronics designer Strong analog design, test, PSU, EMC/regulatory, simulation, manufacturing test experience Debugging of processor-based hardware Board documentation and software team liaison Extensive product development background Ability to lead and mentor technical teams Benefits Include: Competitive salary Home/office hybrid working opportunities 25 days annual leave plus option to buy 3 more Pension scheme with employer contributions Private medical cover options Cycle to work scheme Free parking Annual bonus This is an opportunity to shape cutting-edge underground utility location products for a world-leading company with an excellent work-life balance. If you have the required electronics engineering skills, apply today!
About the role We are an innovative high-tech next-generation telecommunications start-up based in the Surrey area, actively seeking exceptionally talented engineers to join our dynamic team. As part of this role, your focus will span the entire development lifecycle, from concept through to volume production. You will be engaged in every aspect of the development process to ensure successful outcomes. This role requires a strong emphasis on multi-functional collaboration and fostering a robust team spirit. We are seeking candidates with a flexible working attitude, a team player who can also demonstrating the ability to work autonomously and take responsibility in a dynamic environment. Responsibilities Design and develop RF circuits and systems for telecom products, including transceivers, amplifiers, filters, Clocks circuits and antennas. Participate in the full life cycle of telecoms Radio product development, from specification and design through implementation, testing and support. Conduct feasibility studies and perform RF simulations to optimise system performance. Coordinate design review activities to ensure that designs meet their requirements. Collaborate with cross-functional teams, including hardware, firmware and software and test engineers to ensure seamless integration of RF circuits into overall product design. Conduct testing and validation of RF designs, troubleshooting and resolving any issues that arise during the development process. Create and maintain comprehensive documentation for the RF Design, including design specifications, debug guide and user manuals. Work closely with manufacturing teams to ensure successful transfer of RF designs into production. Stay current with industry trends and emerging technologies in RF and telecom to contribute innovative ideas to product development. Develop/maintain supplier relationships. Candidate requirements Bachelor s or master s degree in Electrical and Electronic engineering or related fields. Experience with 4G and beyond technologies. Over 8 years proven Industrial experience in RF circuit design for telecom products, with a focus on wireless communication systems. Knowledge of RF front-end modules, Clocks, FPGA functionalities and architectures. Proficiency in RF simulation tools and design software (e.g., ADS, HFSS). Experience with measurement equipment such as network analysers and spectrum analysers. Familiarity with multi-layer PCB layout and design considerations for RF circuits. Familiarity with industry standards and regulations related to RF and wireless communication. Excellent problem-solving skills and the ability to work in a fast-paced, collaborative environment. Excellent verbal and written communication skills.
10/04/2024
Full time
About the role We are an innovative high-tech next-generation telecommunications start-up based in the Surrey area, actively seeking exceptionally talented engineers to join our dynamic team. As part of this role, your focus will span the entire development lifecycle, from concept through to volume production. You will be engaged in every aspect of the development process to ensure successful outcomes. This role requires a strong emphasis on multi-functional collaboration and fostering a robust team spirit. We are seeking candidates with a flexible working attitude, a team player who can also demonstrating the ability to work autonomously and take responsibility in a dynamic environment. Responsibilities Design and develop RF circuits and systems for telecom products, including transceivers, amplifiers, filters, Clocks circuits and antennas. Participate in the full life cycle of telecoms Radio product development, from specification and design through implementation, testing and support. Conduct feasibility studies and perform RF simulations to optimise system performance. Coordinate design review activities to ensure that designs meet their requirements. Collaborate with cross-functional teams, including hardware, firmware and software and test engineers to ensure seamless integration of RF circuits into overall product design. Conduct testing and validation of RF designs, troubleshooting and resolving any issues that arise during the development process. Create and maintain comprehensive documentation for the RF Design, including design specifications, debug guide and user manuals. Work closely with manufacturing teams to ensure successful transfer of RF designs into production. Stay current with industry trends and emerging technologies in RF and telecom to contribute innovative ideas to product development. Develop/maintain supplier relationships. Candidate requirements Bachelor s or master s degree in Electrical and Electronic engineering or related fields. Experience with 4G and beyond technologies. Over 8 years proven Industrial experience in RF circuit design for telecom products, with a focus on wireless communication systems. Knowledge of RF front-end modules, Clocks, FPGA functionalities and architectures. Proficiency in RF simulation tools and design software (e.g., ADS, HFSS). Experience with measurement equipment such as network analysers and spectrum analysers. Familiarity with multi-layer PCB layout and design considerations for RF circuits. Familiarity with industry standards and regulations related to RF and wireless communication. Excellent problem-solving skills and the ability to work in a fast-paced, collaborative environment. Excellent verbal and written communication skills.